Commit graph

17,267 commits

Author SHA1 Message Date
Thierry Reding
53ea72132d drm/tegra: gem: Use dma_mmap_writecombine()
Use the existing API rather than open-coding equivalent functionality
in the driver.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:14:48 +01:00
Thierry Reding
e55a8bd8ea drm/tegra: gem: Remove redundant drm_gem_free_mmap_offset()
The drm_gem_object_release() function already performs this cleanup, so
there is no reason to do it explicitly.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:14:47 +01:00
Thierry Reding
a8b48df592 drm/tegra: gem: Cleanup tegra_bo_create_with_handle()
There is only a single location where the function needs to do cleanup.
Skip the error unwinding path and call the cleanup function directly
instead.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:14:47 +01:00
Thierry Reding
c28d4a317f drm/tegra: gem: Extract tegra_bo_alloc_object()
This function implements the common buffer object allocation used for
both allocation and import paths.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:14:46 +01:00
Sean Paul
7e3bc3a98f drm/tegra: dsi: Set up PHY_TIMING & BTA_TIMING registers earlier
Make sure the DSI PHY_TIMING and BTA_TIMING registers are initialized
when the clocks are set up as opposed to when the output is enabled.
This makes sure that the PHY timings are properly set up when the panel
is prepared and that DCS commands sent at that time use the appropriate
timings.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:12:44 +01:00
Thierry Reding
030611ecc5 drm/tegra: dsi: Replace 1000000 by USEC_PER_SEC
Using the symbolic constant instantly provides a lot more context.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:12:41 +01:00
Thierry Reding
369bc65b6b drm/tegra: dsi: Replace 1000000000UL by NSEC_PER_SEC
Using the symbolic constant instantly provides a lot more context.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:12:39 +01:00
Thierry Reding
0fffdf6ca9 drm/tegra: dsi: Implement host transfers
Add support for sending MIPI DSI command packets from the host to a
peripheral. This is required for panels that need configuration before
they accept video data.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:12:36 +01:00
Thierry Reding
e94236cde4 drm/tegra: dsi: Add ganged mode support
Implement ganged mode support for the Tegra DSI driver. The DSI host
controller to gang up with is specified via a phandle in the device tree
and the resolved DSI host controller used for the programming of the
ganged-mode registers.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:12:28 +01:00
Thierry Reding
3f6b406f7d drm/tegra: dsi: Split out tegra_dsi_set_timeout()
In preparation for adding ganged-mode support, this commit splits out
the tegra_dsi_set_timeout() function so that it can be reused for the
slave DSI controller.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:12:26 +01:00
Thierry Reding
337b443d58 drm/tegra: dsi: Add command mode support
Add support for DC-driven command mode. This is a mode where the video
stream sent by the display controller is packed into DCS command packets
(write_memory_start and write_memory_continue) by the DSI controller. It
can be used for panels with a remote framebuffer and is useful to save
power when used with a dynamic refresh rate (not yet supported by the
driver).

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:12:23 +01:00
Thierry Reding
563eff1f98 drm/tegra: dsi: Refactor in preparation for command mode
For command mode panels, the DSI controller needs to be enabled and
configured so that panel drivers can send commands prior to the video
stream being enabled.

Move code from the monolithic output enable/disable functions into
smaller, reusable units to allow more fine-grained control over the
controller state.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:12:20 +01:00
Thierry Reding
d2d0a9d212 drm/tegra: dsi: Properly cleanup on probe failure
The driver wasn't even attempting to do any cleanup when probing failed.
Fix this by releasing any resources acquired up to the point of failure
and putting the device back into the original state (reset, clocks off).

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:12:18 +01:00
Thierry Reding
ba3df97922 drm/tegra: dsi: Mark connector hotpluggable
DSI panels can always be hotplugged via the DSI bus' attach/detach
infrastructure, so unconditionally mark the connector hotpluggable.

While at it, also make sure that when a panel is detached the connector
is marked unconnected before calling into the DRM hotplug helpers to
reflect the correct state.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:12:16 +01:00
Thierry Reding
41a8e72e0e drm/tegra: dsi: Leave parent clock alone
The common clock framework will take care of preparing and enabling the
parent of the DSI clock automatically.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:12:13 +01:00
Thierry Reding
183ef2883d drm/tegra: dsi: Do not manage clock on enable/disable
In preparation for supporting command mode panels, don't disable the
clock when the output is disabled. The output will be enabled only after
the panel has been programmed in command mode, so the clock must always
remain on.

As a side-effect, pad calibration now only needs to be done at driver
probe time, since neither power nor controller state will go away before
driver removal. While at it, use a 32-bit variable to store register
content because the registers are 32-bit even on 64-bit Tegra.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:12:10 +01:00
Thierry Reding
976cebc35b drm/tegra: dsi: Make FIFO depths host parameters
Rather than hardcoding them as macros, make the host and video FIFO
depths parameters so that they can be more easily adjusted if a new
generation of the Tegra SoC changes them.

While at it, set the depth of the video FIFO to the correct value of
1920 *words* rather than *bytes*.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:12:07 +01:00
Sean Paul
0bfad39671 drm/tegra: DPMS off/on in encoder prepare/commit
Previously the panel and output were only enabled on encoder->dpms(). If
userspace called dpms on before doing a modeset, the driver would get into
a state where the connector had a dpms state of ON, but the encoder and output
were not enabled (because the encoder is not yet attached to the connector).
Subsequent dpms ON calls are ignored b/c the connector's state already matches
the desired state.

This patch enables/disables the panel and output on modeset as well, so we
can catch the above case.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:12:04 +01:00
Thierry Reding
dc670e49e7 drm/tegra: Do not enable output on .mode_set()
The output is already enabled in .dpms(), doing it in .mode_set() too
can cause noticeable flicker.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:12:02 +01:00
Thierry Reding
9c0127004f drm/tegra: dc: Add powergate support
Both display controllers are in their own power partition. Currently the
driver relies on the assumption that these partitions are on (which is
the hardware default). However some bootloaders may disable them, so the
driver must make sure to turn them back on to avoid hangs.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:11:59 +01:00
Sean Paul
b298e98ef6 gpu: host1x: mipi: Set MIPI_CAL_BIAS_PAD_CFG1 register
During calibration, sets the "internal reference level for drive pull-
down" to the value specified in the Tegra TRM.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:11:57 +01:00
Sean Paul
08a15cc34d gpu: host1x: mipi: Calibrate clock lanes
Include the clock lanes when calibrating the MIPI PHY on Tegra124
compatible devices.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
[treding@nvidia.com: bikeshedding]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:11:54 +01:00
Sean Paul
26f7a92a3a gpu: host1x: mipi: Preserve the contents of MIPI_CAL_CTRL
By paving the CTRL reg value, the current code changes MIPI_CAL_PRESCALE
("Auto-cal calibration step prescale") from 1us to 0.1us (val=0). In the
description for PHY's noise filter (MIPI_CAL_NOISE_FLT), the TRM states
that if the value of the prescale is 0 (or 0.1us), the filter should be
set between 2-5. However, the current code sets it to 0.

For now, let's keep the prescale and filter values as-is, which is most
likely the power-on-reset values of 0x2 and 0xa, respectively.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:11:51 +01:00
Thierry Reding
57b17ae71f gpu: host1x: mipi: Registers are 32 bits wide
On 64-bit platforms an unsigned long would be 64 bit and cause
unnecessary casting when being passed to writel() or returned from
readl(). Make register values 32 bits wide to avoid that.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:11:48 +01:00
Thierry Reding
3880e95f27 gpu: host1x: Make gather offsets unsigned
Use the u32 type for the offset in the host1x_job_gather structure for
consistentcy with other structures. Negative offsets don't make sense in
this context.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:11:44 +01:00
Thierry Reding
ba73fbc2ca gpu: host1x: Print address/offset pairs consistently
Consistently use a format of %pad+%#x to print address/offset in debug
messages.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:11:41 +01:00
Thierry Reding
7f27d60b28 gpu: host1x: Fix typo in comment
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:11:38 +01:00
Thierry Reding
0169b93f44 gpu: host1x: Make mapped field of push buffers void *
This reduces the amount of casting that needs to be done to get rid of
annoying warnings on 64-bit builds.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:11:35 +01:00
Thierry Reding
b40d02bf96 gpu: host1x: Use struct host1x_bo pointers in traces
Rather than cast to a u32 use the struct host1x_bo pointers directly.
This avoid annoying warnings for 64-bit builds.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:11:32 +01:00
Thierry Reding
db4fd5197b drm/tegra: Depend on COMMON_CLK
The introduction of the COMPILE_TEST dependency in commit 158b50aefa
(drm/tegra: Increase compile test coverage) removes the dependency on
COMMON_CLK (implicitly selected via ARCH_TEGRA, ARCH_MULTI_V7 and
ARCH_MULTIPLATFORM).

Reported-by: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 16:10:27 +01:00
Thierry Reding
ed6ff40ee7 drm/dsi: Constify mipi_dsi_msg
struct mipi_dsi_msg is a read-only structure, drivers should never need
to modify it. Make this explicit by making all references to the struct
const.

Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:55:41 +01:00
Thierry Reding
960dd616f6 drm/dsi: Make mipi_dsi_dcs_{read,write}() symmetrical
Currently the mipi_dsi_dcs_write() function requires the DCS command
byte to be embedded within the write buffer whereas mipi_dsi_dcs_read()
has a separate parameter. Make them more symmetrical by adding an extra
command parameter to mipi_dsi_dcs_write().

The S6E8AA0 driver relies on the old asymmetric API and there's concern
that moving to the new API may be less efficient. Provide a new function
with the old semantics for those cases and make the S6E8AA0 driver use
it instead.

Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:55:36 +01:00
Thierry Reding
9eb491f3ee drm/dsi: Add DSI transfer helper
A common pattern is starting to emerge for higher level transfer
helpers. Create a new helper that encapsulates this pattern and avoids
code duplication.

Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:55:34 +01:00
Thierry Reding
a52879e8d7 drm/dsi: Add message to packet translator
This commit introduces a new function, mipi_dsi_create_packet(), which
converts from a MIPI DSI message to a MIPI DSI packet. The MIPI DSI
packet is as close to the protocol described in the DSI specification as
possible and useful in drivers that need to write a DSI packet into a
FIFO to send a message off to the peripheral.

Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:55:26 +01:00
Thierry Reding
02acb76d72 drm/dsi: Introduce packet format helpers
Add two helpers, mipi_dsi_packet_format_is_{short,long}(), that help in
determining the format of a packet.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-13 13:55:24 +01:00
Thierry Reding
d85a1609e6 drm/panel: s6e8aa0: Fix build warnings on 64-bit
The %* format specifier expects an integer, which works fine with size_t
arguments on 32-bit because the types match. However on 64-bit, size_t
is typedef'd to unsigned long and will cause a build warning.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-07 15:40:36 +01:00
Thierry Reding
eccda2d1e1 drm/panel: ld9040: Fix build warnings on 64-bit
The %* format specifier expects an integer, which works fine with size_t
arguments on 32-bit because the types match. However on 64-bit, size_t
is typedef'd to unsigned long and will cause a build warning.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-07 15:40:35 +01:00
Daniel Kurtz
7fe8c7778f drm/panel: simple: Update Innolux N116BGE timings
There are several different models of N116BGE. According to commit
0a2288c06a ("drm/panel: simple: Add Innolux N116BGE panel support"),
the video timings are for the eDP variant.

The clock and htotal values added by that patch are out of spec
according to the datasheets I have seen for the eDP N116BGE (-EA2 and
-EB2).

This patch changes the values to the "Typ" values on the datasheet.

Signed-off-by: Daniel Kurtz <djkurtz@chromium.org>
[tested that these timings work with the Tegra132 Norrin panel]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-07 15:37:21 +01:00
Lucas Stach
61ac0bf89d drm/panel: simple: Add support for Hitachi TX23D38VM0CAA
The Hitachi TX23D38VM0CAA is a 9" WVGA TFT LCD panel and can be
supported by the simple-panel driver.

This panel is connected via LVDS and uses the data enable signal for
timing. Since HSYNC/VSYNC are ignored, the split between sync length and
porches is arbitrary, as long as the complete horizontal blanking interval
is 256 clocks, and the vertical blanking interval is 45 lines.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-07 10:04:23 +01:00
Lucas Stach
d731f661b5 drm/panel: simple: Add support for Innolux G121I1-L01
The Innolux G121I1-L01 is a 12.1" TFT LCD panel and can be supported by
the simple-panel driver.

This panel is connected via LVDS and uses the data enable signal for
timing. Since HSYNC/VSYNC are ignored, the split between sync length and
porches is arbitrary, as long as the complete horizontal blanking interval
is 160 clocks, and the vertical blanking interval is 24 lines.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-07 10:04:19 +01:00
Thierry Reding
d7a839cde9 drm/panel: simple: Add missing .bpc fields
Various panels were missing the .bpc field which encodes the number of
bits per color. Not every display driver relies on this value, but since
the panels can be used with any display engine it must be specified so
that if a driver knows how to differentiate based on this field it can
do so.

Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-07 09:58:55 +01:00
Ajay Kumar
e35e305eff drm/panel: simple: Add AUO B116XW03 panel support
The AUO B116XW03 is a 11.6" HD TFT LCD panel connecting to a LVDS
interface and with an integrated LED backlight unit.

This panel is used on the Samsung Chromebook(XE303C12).

Signed-off-by: Ajay Kumar <ajaykumar.rs@samsung.com>
[treding@nvidia.com: add missing .bpc field]
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-07 09:58:55 +01:00
Philipp Zabel
a853205efb drm/panel: simple: Add HannStar HSD070PWW1 7.0" WXGA TFT LCD panel
This patch adds support for the HannStar Display Corp. HSD070PWW1 7.0"
WXGA TFT LCD panel to the simple-panel driver. The binding documentation
is included.
This panel is connected via LVDS and uses the data enable signal for
timing. Since HSYNC/VSYNC are ignored, the split between sync length and
porches is arbitrary, as long as the complete horizontal blanking interval
is 160 clocks, and the vertical blanking interval is 23 lines.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-07 09:58:54 +01:00
Alexandre Courbot
a61400d85c drm/panel: simple: Update calls to gpiod_get*()
Add the new flags argument to calls of (devm_)gpiod_get*() and remove
any direction setting code afterwards.

Currently both forms (with or without the flags argument) are valid
thanks to transitional macros in <linux/gpio/consumer.h>. These macros
will be removed once all consumers are updated and the flags argument
will become compulsary.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-06 09:50:56 +01:00
Alexandre Courbot
26c2ad8a49 drm/panel: s6e8aa0: Update calls to gpiod_get*()
Add the new flags argument to calls of (devm_)gpiod_get*() and remove
any direction setting code afterwards.

Currently both forms (with or without the flags argument) are valid
thanks to transitional macros in <linux/gpio/consumer.h>. These macros
will be removed once all consumers are updated and the flags argument
will become compulsary.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-06 09:50:38 +01:00
Alexandre Courbot
8a8cc83cbd drm/panel: ld9040: Update calls to gpiod_get*()
Add the new flags argument to calls of (devm_)gpiod_get*() and remove
any direction setting code afterwards.

Currently both forms (with or without the flags argument) are valid
thanks to transitional macros in <linux/gpio/consumer.h>. These macros
will be removed once all consumers are updated and the flags argument
will become compulsary.

Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-11-06 09:50:27 +01:00
Linus Torvalds
2d65a9f48f Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
 "This is the main git pull for the drm,

  I pretty much froze major pulls at -rc5/6 time, and haven't had much
  fallout, so will probably continue doing that.

  Lots of changes all over, big internal header cleanup to make it clear
  drm features are legacy things and what are things that modern KMS
  drivers should be using.  Also big move to use the new generic fences
  in all the TTM drivers.

  core:
        atomic prep work,
        vblank rework changes, allows immediate vblank disables
        major header reworking and cleanups to better delinate legacy
        interfaces from what KMS drivers should be using.
        cursor planes locking fixes

  ttm:
        move to generic fences (affects all TTM drivers)
        ppc64 caching fixes

  radeon:
        userptr support,
        uvd for old asics,
        reset rework for fence changes
        better buffer placement changes,
        dpm feature enablement
        hdmi audio support fixes

  intel:
        Cherryview work,
        180 degree rotation,
        skylake prep work,
        execlist command submission
        full ppgtt prep work
        cursor improvements
        edid caching,
        vdd handling improvements

  nouveau:
        fence reworking
        kepler memory clock work
        gt21x clock work
        fan control improvements
        hdmi infoframe fixes
        DP audio

  ast:
        ppc64 fixes
        caching fix

  rcar:
        rcar-du DT support

  ipuv3:
        prep work for capture support

  msm:
        LVDS support for mdp4, new panel, gpu refactoring

  exynos:
        exynos3250 SoC support, drop bad mmap interface,
        mipi dsi changes, and component match support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (640 commits)
  drm/mst: rework payload table allocation to conform better.
  drm/ast: Fix HW cursor image
  drm/radeon/kv: add uvd/vce info to dpm debugfs output
  drm/radeon/ci: add uvd/vce info to dpm debugfs output
  drm/radeon: export reservation_object from dmabuf to ttm
  drm/radeon: cope with foreign fences inside the reservation object
  drm/radeon: cope with foreign fences inside display
  drm/core: use helper to check driver features
  drm/radeon/cik: write gfx ucode version to ucode addr reg
  drm/radeon/si: print full CS when we hit a packet 0
  drm/radeon: remove unecessary includes
  drm/radeon/combios: declare legacy_connector_convert as static
  drm/radeon/atombios: declare connector convert tables as static
  drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table
  drm/radeon/dpm: drop clk/voltage dependency filters for BTC
  drm/radeon/dpm: drop clk/voltage dependency filters for CI
  drm/radeon/dpm: drop clk/voltage dependency filters for SI
  drm/radeon/dpm: drop clk/voltage dependency filters for NI
  drm/radeon: disable audio when we disable hdmi (v2)
  drm/radeon: split audio enable between eg and r600 (v2)
  ...
2014-10-14 09:39:08 +02:00
Linus Torvalds
faafcba3b5 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Optimized support for Intel "Cluster-on-Die" (CoD) topologies (Dave
     Hansen)

   - Various sched/idle refinements for better idle handling (Nicolas
     Pitre, Daniel Lezcano, Chuansheng Liu, Vincent Guittot)

   - sched/numa updates and optimizations (Rik van Riel)

   - sysbench speedup (Vincent Guittot)

   - capacity calculation cleanups/refactoring (Vincent Guittot)

   - Various cleanups to thread group iteration (Oleg Nesterov)

   - Double-rq-lock removal optimization and various refactorings
     (Kirill Tkhai)

   - various sched/deadline fixes

  ... and lots of other changes"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (72 commits)
  sched/dl: Use dl_bw_of() under rcu_read_lock_sched()
  sched/fair: Delete resched_cpu() from idle_balance()
  sched, time: Fix build error with 64 bit cputime_t on 32 bit systems
  sched: Improve sysbench performance by fixing spurious active migration
  sched/x86: Fix up typo in topology detection
  x86, sched: Add new topology for multi-NUMA-node CPUs
  sched/rt: Use resched_curr() in task_tick_rt()
  sched: Use rq->rd in sched_setaffinity() under RCU read lock
  sched: cleanup: Rename 'out_unlock' to 'out_free_new_mask'
  sched: Use dl_bw_of() under RCU read lock
  sched/fair: Remove duplicate code from can_migrate_task()
  sched, mips, ia64: Remove __ARCH_WANT_UNLOCKED_CTXSW
  sched: print_rq(): Don't use tasklist_lock
  sched: normalize_rt_tasks(): Don't use _irqsave for tasklist_lock, use task_rq_lock()
  sched: Fix the task-group check in tg_has_rt_tasks()
  sched/fair: Leverage the idle state info when choosing the "idlest" cpu
  sched: Let the scheduler see CPU idle states
  sched/deadline: Fix inter- exclusive cpusets migrations
  sched/deadline: Clear dl_entity params when setscheduling to different class
  sched/numa: Kill the wrong/dead TASK_DEAD check in task_numa_fault()
  ...
2014-10-13 16:23:15 +02:00
Linus Torvalds
6d5f0ebfc0 Merge branch 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core locking updates from Ingo Molnar:
 "The main updates in this cycle were:

   - mutex MCS refactoring finishing touches: improve comments, refactor
     and clean up code, reduce debug data structure footprint, etc.

   - qrwlock finishing touches: remove old code, self-test updates.

   - small rwsem optimization

   - various smaller fixes/cleanups"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Revert qrwlock recusive stuff
  locking/rwsem: Avoid double checking before try acquiring write lock
  locking/rwsem: Move EXPORT_SYMBOL() lines to follow function definition
  locking/rwlock, x86: Delete unused asm/rwlock.h and rwlock.S
  locking/rwlock, x86: Clean up asm/spinlock*.h to remove old rwlock code
  locking/semaphore: Resolve some shadow warnings
  locking/selftest: Support queued rwlock
  locking/lockdep: Restrict the use of recursive read_lock() with qrwlock
  locking/spinlocks: Always evaluate the second argument of spin_lock_nested()
  locking/Documentation: Update locking/mutex-design.txt disadvantages
  locking/Documentation: Move locking related docs into Documentation/locking/
  locking/mutexes: Use MUTEX_SPIN_ON_OWNER when appropriate
  locking/mutexes: Refactor optimistic spinning code
  locking/mcs: Remove obsolete comment
  locking/mutexes: Document quick lock release when unlocking
  locking/mutexes: Standardize arguments in lock/unlock slowpaths
  locking: Remove deprecated smp_mb__() barriers
2014-10-13 15:51:40 +02:00
Linus Torvalds
77c688ac87 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs updates from Al Viro:
 "The big thing in this pile is Eric's unmount-on-rmdir series; we
  finally have everything we need for that.  The final piece of prereqs
  is delayed mntput() - now filesystem shutdown always happens on
  shallow stack.

  Other than that, we have several new primitives for iov_iter (Matt
  Wilcox, culled from his XIP-related series) pushing the conversion to
  ->read_iter()/ ->write_iter() a bit more, a bunch of fs/dcache.c
  cleanups and fixes (including the external name refcounting, which
  gives consistent behaviour of d_move() wrt procfs symlinks for long
  and short names alike) and assorted cleanups and fixes all over the
  place.

  This is just the first pile; there's a lot of stuff from various
  people that ought to go in this window.  Starting with
  unionmount/overlayfs mess...  ;-/"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (60 commits)
  fs/file_table.c: Update alloc_file() comment
  vfs: Deduplicate code shared by xattr system calls operating on paths
  reiserfs: remove pointless forward declaration of struct nameidata
  don't need that forward declaration of struct nameidata in dcache.h anymore
  take dname_external() into fs/dcache.c
  let path_init() failures treated the same way as subsequent link_path_walk()
  fix misuses of f_count() in ppp and netlink
  ncpfs: use list_for_each_entry() for d_subdirs walk
  vfs: move getname() from callers to do_mount()
  gfs2_atomic_open(): skip lookups on hashed dentry
  [infiniband] remove pointless assignments
  gadgetfs: saner API for gadgetfs_create_file()
  f_fs: saner API for ffs_sb_create_file()
  jfs: don't hash direct inode
  [s390] remove pointless assignment of ->f_op in vmlogrdr ->open()
  ecryptfs: ->f_op is never NULL
  android: ->f_op is never NULL
  nouveau: __iomem misannotations
  missing annotation in fs/file.c
  fs: namespace: suppress 'may be used uninitialized' warnings
  ...
2014-10-13 11:28:42 +02:00