[ Upstream commit b58eaa4761 ]
The devs_lock spinlock introduced when adding support for ibi:s was
never initialized.
Fixes: e389b1d72a ("i3c: dw: Add support for in-band interrupts")
Suggested-by: Jani Nurminen <jani.nurminen@windriver.com>
Signed-off-by: Fredrik Markstrom <fredrik.markstrom@est.tech>
Reviewed-by: Ivar Holmqvist <ivar.holmqvist@est.tech>
Link: https://patch.msgid.link/20260116-i3c_dw_initialize_spinlock-v3-1-cf707b6ed75f@est.tech
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faddeb8483 ]
The inline data buffer head (dibh) is being released prematurely in
gfs2_iomap_begin() via release_metapath() while iomap->inline_data
still points to dibh->b_data. This causes a use-after-free when
iomap_write_end_inline() later attempts to write to the inline data
area.
The bug sequence:
1. gfs2_iomap_begin() calls gfs2_meta_inode_buffer() to read inode
metadata into dibh
2. Sets iomap->inline_data = dibh->b_data + sizeof(struct gfs2_dinode)
3. Calls release_metapath() which calls brelse(dibh), dropping refcount
to 0
4. kswapd reclaims the page (~39ms later in the syzbot report)
5. iomap_write_end_inline() tries to memcpy() to iomap->inline_data
6. KASAN detects use-after-free write to freed memory
Fix by storing dibh in iomap->private and incrementing its refcount
with get_bh() in gfs2_iomap_begin(). The buffer is then properly
released in gfs2_iomap_end() after the inline write completes,
ensuring the page stays alive for the entire iomap operation.
Note: A C reproducer is not available for this issue. The fix is based
on analysis of the KASAN report and code review showing the buffer head
is freed before use.
[agruenba: Take buffer head reference in gfs2_iomap_begin() to avoid
leaks in gfs2_iomap_get() and gfs2_iomap_alloc().]
Reported-by: syzbot+ea1cd4aa4d1e98458a55@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ea1cd4aa4d1e98458a55
Fixes: d0a22a4b03 ("gfs2: Fix iomap write page reclaim deadlock")
Signed-off-by: Deepanshu Kartikey <kartikey406@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22150a7d40 ]
Commit a475c5dd16 ("gfs2: Free quota data objects synchronously")
started freeing quota data objects during filesystem shutdown instead of
putting them back onto the LRU list, but it failed to remove these
objects from the LRU list, causing LRU list corruption. This caused
use-after-free when the shrinker (gfs2_qd_shrink_scan) tried to access
already-freed objects on the LRU list.
Fix this by removing qd objects from the LRU list before freeing them in
qd_put().
Initial fix from Deepanshu Kartikey <kartikey406@gmail.com>.
Fixes: a475c5dd16 ("gfs2: Free quota data objects synchronously")
Reported-by: syzbot+046b605f01802054bff0@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=046b605f01802054bff0
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11d763f0b0 ]
Fix a bug in gfs2's asynchronous glock handling for rename and exchange
operations. The original async implementation from commit ad26967b9a
("gfs2: Use async glocks for rename") mentioned that retries were needed
but never implemented them, causing operations to fail with -ESTALE
instead of retrying on timeout.
Also makes the waiting interruptible.
In addition, the timeouts used were too high for situations in which
timing out is a rare but expected scenario. Switch to shorter timeouts
with randomization and exponentional backoff.
Fixes: ad26967b9a ("gfs2: Use async glocks for rename")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0775157b9 ]
To prevent inconsistent state when an error occurs, ensure the hot-join
flag is updated only when enabling or disabling hot-join succeeds.
Fixes: 317bacf960 ("i3c: master: add enable(disable) hot join in sys entry")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113072702.16268-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 589cff4975 ]
The init_fs symbol is defined in <linux/init_task.h> but was
not included in fs/fs_struct.c so fix by adding the include.
Fixes the following sparse warning:
fs/fs_struct.c:150:18: warning: symbol 'init_fs' was not declared. Should it be static?
Fixes: 3e93cd6718 ("Take fs_struct handling to new file")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Link: https://patch.msgid.link/20260108115856.238027-1-ben.dooks@codethink.co.uk
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1219e0feae ]
The comment above file_ref_init() says:
"We're SLAB_TYPESAFE_BY_RCU so initialize f_ref last."
but file_set_fsnotify_mode() was added after file_ref_init().
Move it right after setting f_mode, where it makes more sense.
Fixes: 711f9b8fbe ("fsnotify: disable pre-content and permission events by default")
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Link: https://patch.msgid.link/20260109211536.3565697-1-amir73il@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6784f27472 ]
commit 4ef4ac3601 ("device_cgroup: avoid access to ->i_rdev in the
common case in devcgroup_inode_permission()") reordered the checks in
devcgroup_inode_permission() to check the inode mode before checking
i_rdev, for better cache behavior.
However, the likely() annotation on the i_rdev check was not updated
to reflect the new code flow. Originally, when i_rdev was checked
first, likely(!inode->i_rdev) made sense because most inodes were(?)
regular files/directories, thus i_rdev == 0.
After the reorder, by the time we reach the i_rdev check, we have
already confirmed the inode IS a block or character device. Block and
character special files are precisely defined by having a device number
(i_rdev), so !inode->i_rdev is now the rare edge case, not the common
case.
Branch profiling confirmed this is 100% mispredicted:
correct incorrect % Function File Line
------- --------- - -------- ---- ----
0 2631904 100 devcgroup_inode_permission device_cgroup.h 24
Remove likely() to avoid giving the wrong hint to the CPU.
Fixes: 4ef4ac3601 ("device_cgroup: avoid access to ->i_rdev in the common case in devcgroup_inode_permission()")
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260107-likely_device-v1-1-0c55f83a7e47@debian.org
Reviewed-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3502cea99c ]
Move device name initialization to occur after i3c_bus_init()
so that i3cbus->id is guaranteed to be assigned before it is used.
Fixes: 9d4f219807 ("i3c: fix refcount inconsistency in i3c_master_register")
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260112-upstream_i3c_fix-v1-1-cbbf2cb71809@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 671ef08d94 ]
Change to adjust effective L3 cache size with SNC enabled change
introduced the snc_nodes_per_l3_cache() function to detect the Intel
Sub-NUMA Clustering (SNC) feature by comparing #CPUs in node0 with #CPUs
sharing LLC with CPU0. The function was designed to return:
(1) >1: SNC mode is enabled.
(2) 1: SNC mode is not enabled or not supported.
However, on certain Hygon CPUs, #CPUs sharing LLC with CPU0 is actually
less than #CPUs in node0. This results in snc_nodes_per_l3_cache()
returning 0 (calculated as cache_cpus / node_cpus).
This leads to a division by zero error in get_cache_size():
*cache_size /= snc_nodes_per_l3_cache();
Causing the resctrl selftest to fail with:
"Floating point exception (core dumped)"
Fix the issue by ensuring snc_nodes_per_l3_cache() returns 1 when SNC
mode is not supported on the platform.
Updated commit log to fix commit has issues:
Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20251217030456.3834956-2-shenxiaochen@open-hieco.net
Fixes: a1cd99e700 ("selftests/resctrl: Adjust effective L3 cache size with SNC enabled")
Signed-off-by: Xiaochen Shen <shenxiaochen@open-hieco.net>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Fenghua Yu <fenghuay@nvidia.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76489955c6 ]
The comapt_xxx_class symbols aren't declared in anything that
lib/comapt_audit.c is including (arm64 build) which is causing
the following sparse warnings:
lib/compat_audit.c:7:10: warning: symbol 'compat_dir_class'
was not declared. Should it be static?
lib/compat_audit.c:12:10: warning: symbol 'compat_read_class'
was not declared. Should it be static?
lib/compat_audit.c:17:10: warning: symbol 'compat_write_class'
was not declared. Should it be static?
lib/compat_audit.c:22:10: warning: symbol 'compat_chattr_class'
was not declared. Should it be static?
lib/compat_audit.c:27:10: warning: symbol 'compat_signal_class'
was not declared. Should it be static?
Trying to fix this by chaning compat_audit.c to inclde <linux/audit.h>
does not work on arm64 due to compile errors with the extra includes
that changing this header makes. The simpler thing would be just to
move the definitons of these symbols out of <linux/audit.h> into
<linux/audit_arch.h> which is included.
Fixes: 4b58841149 ("audit: Add generic compat syscall support")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[PM: rewrite subject line, fixed line length in description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8a73cc46c ]
When hfs_bnode_create() finds that a node is already hashed (which should
not happen in normal operation), it currently returns the existing node
without incrementing its reference count. This causes a reference count
inconsistency that leads to a kernel panic when the node is later freed
in hfs_bnode_put():
kernel BUG at fs/hfsplus/bnode.c:676!
BUG_ON(!atomic_read(&node->refcnt))
This scenario can occur when hfs_bmap_alloc() attempts to allocate a node
that is already in use (e.g., when node 0's bitmap bit is incorrectly
unset), or due to filesystem corruption.
Returning an existing node from a create path is not normal operation.
Fix this by returning ERR_PTR(-EEXIST) instead of the node when it's
already hashed. This properly signals the error condition to callers,
which already check for IS_ERR() return values.
Reported-by: syzbot+1c8ff72d0cd8a50dfeaa@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=1c8ff72d0cd8a50dfeaa
Link: https://lore.kernel.org/all/784415834694f39902088fa8946850fc1779a318.camel@ibm.com/
Fixes: 634725a929 ("[PATCH] hfs: cleanup HFS+ prints")
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20251229204938.1907089-1-shardul.b@mpiricsoftware.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5c23a4d29 ]
It seems like, after the request_mem_region(), the corresponding
release_mem_region() must take the same size. This was done
in (now removed due to previous refactoring) charlcd_remove()
but not in the error path in charlcd_probe().
Fixes: ce8962455e ("ARM: 6214/2: driver for the character LCD found in ARM refdesigns")
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5551b02fdb upstream.
ib_umad_write computes data_len from user-controlled count and the
MAD header sizes. With a mismatched user MAD header size and RMPP
header length, data_len can become negative and reach ib_create_send_mad().
This can make the padding calculation exceed the segment size and trigger
an out-of-bounds memset in alloc_send_rmpp_list().
Add an explicit check to reject negative data_len before creating the
send buffer.
KASAN splat:
[ 211.363464] BUG: KASAN: slab-out-of-bounds in ib_create_send_mad+0xa01/0x11b0
[ 211.364077] Write of size 220 at addr ffff88800c3fa1f8 by task spray_thread/102
[ 211.365867] ib_create_send_mad+0xa01/0x11b0
[ 211.365887] ib_umad_write+0x853/0x1c80
Fixes: 2be8e3ee8e ("IB/umad: Add P_Key index support")
Signed-off-by: YunJe Shin <ioerts@kookmin.ac.kr>
Link: https://patch.msgid.link/20260203100628.1215408-1-ioerts@kookmin.ac.kr
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14ab3da122 upstream.
If siw_get_hdr() returns -EINVAL before set_rx_fpdu_context(),
qp->rx_fpdu can be NULL. The error path in siw_tcp_rx_data()
dereferences qp->rx_fpdu->more_ddp_segs without checking, which
may lead to a NULL pointer deref. Only check more_ddp_segs when
rx_fpdu is present.
KASAN splat:
[ 101.384271] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7]
[ 101.385869] RIP: 0010:siw_tcp_rx_data+0x13ad/0x1e50
Fixes: 8b6a361b8c ("rdma/siw: receive path")
Signed-off-by: YunJe Shin <ioerts@kookmin.ac.kr>
Link: https://patch.msgid.link/20260204092546.489842-1-ioerts@kookmin.ac.kr
Acked-by: Bernard Metzler <bernard.metzler@linux.dev>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20260217200006.470920131@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Luna Jernberg <droidbittin@gmail.com>
Tested-by: Jeffrin Jose T <jeffrin@rajagiritech.edu.in>
Tested-by: Mark Brown <broonie@kernel.org>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91b76f1059 upstream.
In a previous commit, a bug was introduced where compact SSA summaries
failed to utilize the entire block space in non-4KB block size
configurations, leading to inefficient space management.
This patch fixes the calculation logic to ensure that compact SSA
summaries can fully occupy the block regardless of the block size.
Reported-by: Chris Mason <clm@meta.com>
Fixes: e48e16f3e3 ("f2fs: support non-4KB block size without packed_ssa feature")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Cc: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 50ac3ecd8e ]
-----------[ cut here ]------------
kernel BUG at fs/f2fs/data.c:358!
Call Trace:
<IRQ>
blk_update_request+0x5eb/0xe70 block/blk-mq.c:987
blk_mq_end_request+0x3e/0x70 block/blk-mq.c:1149
blk_complete_reqs block/blk-mq.c:1224 [inline]
blk_done_softirq+0x107/0x160 block/blk-mq.c:1229
handle_softirqs+0x283/0x870 kernel/softirq.c:579
__do_softirq kernel/softirq.c:613 [inline]
invoke_softirq kernel/softirq.c:453 [inline]
__irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:680
irq_exit_rcu+0x9/0x30 kernel/softirq.c:696
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1050 [inline]
sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1050
</IRQ>
In f2fs_write_end_io(), it detects there is inconsistency in between
node page index (nid) and footer.nid of node page.
If footer of node page is corrupted in fuzzed image, then we load corrupted
node page w/ async method, e.g. f2fs_ra_node_pages() or f2fs_ra_node_page(),
in where we won't do sanity check on node footer, once node page becomes
dirty, we will encounter this bug after node page writeback.
Cc: stable@kernel.org
Reported-by: syzbot+803dd716c4310d16ff3a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=803dd716c4310d16ff3a
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
[ Context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed1ac3c977 upstream.
Commit 0b4eeee287 ("iommu/arm-smmu-qcom: Register the TBU driver in
qcom_smmu_impl_init") intended to also probe the TBU driver when
CONFIG_ARM_SMMU_QCOM_DEBUG is disabled, but also moved the corresponding
platform_driver_register() call into qcom_smmu_impl_init() which is
called from arm_smmu_device_probe().
However, it neither makes sense to register drivers from probe()
callbacks of other drivers, nor does the driver core allow registering
drivers with a device lock already being held.
The latter was revealed by commit dc23806a7c ("driver core: enforce
device_lock for driver_match_device()") leading to a deadlock condition
described in [1].
Additionally, it was noted by Robin that the current approach is
potentially racy with async probe [2].
Hence, fix this by registering the qcom_smmu_tbu_driver from
module_init(). Unfortunately, due to the vendoring of the driver, this
requires an indirection through arm-smmu-impl.c.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/lkml/7ae38e31-ef31-43ad-9106-7c76ea0e8596@sirena.org.uk/
Link: https://lore.kernel.org/lkml/DFU7CEPUSG9A.1KKGVW4HIPMSH@kernel.org/ [1]
Link: https://lore.kernel.org/lkml/0c0d3707-9ea5-44f9-88a1-a65c62e3df8d@arm.com/ [2]
Fixes: dc23806a7c ("driver core: enforce device_lock for driver_match_device()")
Fixes: 0b4eeee287 ("iommu/arm-smmu-qcom: Register the TBU driver in qcom_smmu_impl_init")
Acked-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Acked-by: Konrad Dybcio <konradybcio@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com> #LX2160ARDB
Tested-by: Wang Jiayue <akaieurus@gmail.com>
Reviewed-by: Wang Jiayue <akaieurus@gmail.com>
Tested-by: Mark Brown <broonie@kernel.org>
Acked-by: Joerg Roedel <joerg.roedel@amd.com>
Link: https://patch.msgid.link/20260121141215.29658-1-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d860974a7e upstream.
When overwriting already allocated blocks, f2fs_iomap_begin() calls
f2fs_overwrite_io() to check block mappings. However,
f2fs_overwrite_io() iterates through all mapped blocks in the range,
which can be inefficient for fragmented files with large I/O requests.
This patch optimizes f2fs_overwrite_io() by adding a 'check_first'
parameter and introducing __f2fs_overwrite_io() helper. When called from
f2fs_iomap_begin(), we only check the first mapping to determine if the
range is already allocated, which is sufficient for setting
map.m_may_create.
This optimization significantly reduces the number of f2fs_map_blocks()
calls in f2fs_overwrite_io() when called from f2fs_iomap_begin(),
especially for fragmented files with large I/O requests.
Cc: stable@kernel.org
Fixes: 351bc76133 ("f2fs: optimize f2fs DIO overwrites")
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Reviewed-by: Sunmin Jeong <s_min.jeong@samsung.com>
Signed-off-by: Yeongjin Gil <youngjin.gil@samsung.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c145c0318 upstream.
Xiaolong Guo reported a f2fs bug in bugzilla [1]
[1] https://bugzilla.kernel.org/show_bug.cgi?id=220951
Quoted:
"When using stress-ng's swap stress test on F2FS filesystem with kernel 6.6+,
the system experiences data corruption leading to either:
1 dm-verity corruption errors and device reboot
2 F2FS node corruption errors and boot hangs
The issue occurs specifically when:
1 Using F2FS filesystem (ext4 is unaffected)
2 Swapfile size is less than F2FS section size (2MB)
3 Swapfile has fragmented physical layout (multiple non-contiguous extents)
4 Kernel version is 6.6+ (6.1 is unaffected)
The root cause is in check_swap_activate() function in fs/f2fs/data.c. When the
first extent of a small swapfile (< 2MB) is not aligned to section boundaries,
the function incorrectly treats it as the last extent, failing to map
subsequent extents. This results in incorrect swap_extent creation where only
the first extent is mapped, causing subsequent swap writes to overwrite wrong
physical locations (other files' data).
Steps to Reproduce
1 Setup a device with F2FS-formatted userdata partition
2 Compile stress-ng from https://github.com/ColinIanKing/stress-ng
3 Run swap stress test: (Android devices)
adb shell "cd /data/stressng; ./stress-ng-64 --metrics-brief --timeout 60
--swap 0"
Log:
1 Ftrace shows in kernel 6.6, only first extent is mapped during second
f2fs_map_blocks call in check_swap_activate():
stress-ng-swap-8990: f2fs_map_blocks: ino=11002, file offset=0, start
blkaddr=0x43143, len=0x1
(Only 4KB mapped, not the full swapfile)
2 in kernel 6.1, both extents are correctly mapped:
stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=0, start
blkaddr=0x13cd4, len=0x1
stress-ng-swap-5966: f2fs_map_blocks: ino=28011, file offset=1, start
blkaddr=0x60c84b, len=0xff
The problematic code is in check_swap_activate():
if ((pblock - SM_I(sbi)->main_blkaddr) % blks_per_sec ||
nr_pblocks % blks_per_sec ||
!f2fs_valid_pinned_area(sbi, pblock)) {
bool last_extent = false;
not_aligned++;
nr_pblocks = roundup(nr_pblocks, blks_per_sec);
if (cur_lblock + nr_pblocks > sis->max)
nr_pblocks -= blks_per_sec;
/* this extent is last one */
if (!nr_pblocks) {
nr_pblocks = last_lblock - cur_lblock;
last_extent = true;
}
ret = f2fs_migrate_blocks(inode, cur_lblock, nr_pblocks);
if (ret) {
if (ret == -ENOENT)
ret = -EINVAL;
goto out;
}
if (!last_extent)
goto retry;
}
When the first extent is unaligned and roundup(nr_pblocks, blks_per_sec)
exceeds sis->max, we subtract blks_per_sec resulting in nr_pblocks = 0. The
code then incorrectly assumes this is the last extent, sets nr_pblocks =
last_lblock - cur_lblock (entire swapfile), and performs migration. After
migration, it doesn't retry mapping, so subsequent extents are never processed.
"
In order to fix this issue, we need to lookup block mapping info after
we migrate all blocks in the tail of swapfile.
Cc: stable@kernel.org
Fixes: 9703d69d9d ("f2fs: support file pinning for zoned devices")
Cc: Daeho Jeong <daehojeong@google.com>
Reported-and-tested-by: Xiaolong Guo <guoxiaolong2008@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220951
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e48e16f3e3 upstream.
Currently, F2FS requires the packed_ssa feature to be enabled when
utilizing non-4KB block sizes (e.g., 16KB). This restriction limits
the flexibility of filesystem formatting options.
This patch allows F2FS to support non-4KB block sizes even when the
packed_ssa feature is disabled. It adjusts the SSA calculation logic to
correctly handle summary entries in larger blocks without the packed
layout.
Cc: stable@kernel.org
Fixes: 7ee8bc3942 ("f2fs: revert summary entry count from 2048 to 512 in 16kb block support")
Signed-off-by: Daeho Jeong <daehojeong@google.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ce2739e482 upstream.
As syzbot reported an use-after-free issue in f2fs_write_end_io().
It is caused by below race condition:
loop device umount
- worker_thread
- loop_process_work
- do_req_filebacked
- lo_rw_aio
- lo_rw_aio_complete
- blk_mq_end_request
- blk_update_request
- f2fs_write_end_io
- dec_page_count
- folio_end_writeback
- kill_f2fs_super
- kill_block_super
- f2fs_put_super
: free(sbi)
: get_pages(, F2FS_WB_CP_DATA)
accessed sbi which is freed
In kill_f2fs_super(), we will drop all page caches of f2fs inodes before
call free(sbi), it guarantee that all folios should end its writeback, so
it should be safe to access sbi before last folio_end_writeback().
Let's relocate ckpt thread wakeup flow before folio_end_writeback() to
resolve this issue.
Cc: stable@kernel.org
Fixes: e234088758 ("f2fs: avoid wait if IO end up when do_checkpoint for better performance")
Reported-by: syzbot+b4444e3c972a7a124187@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=b4444e3c972a7a124187
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 98ea0039db upstream.
Some f2fs sysfs attributes suffer from out-of-bounds memory access and
incorrect handling of integer values whose size is not 4 bytes.
For example:
vm:~# echo 65537 > /sys/fs/f2fs/vde/carve_out
vm:~# cat /sys/fs/f2fs/vde/carve_out
65537
vm:~# echo 4294967297 > /sys/fs/f2fs/vde/atgc_age_threshold
vm:~# cat /sys/fs/f2fs/vde/atgc_age_threshold
1
carve_out maps to {struct f2fs_sb_info}->carve_out, which is a 8-bit
integer. However, the sysfs interface allows setting it to a value
larger than 255, resulting in an out-of-range update.
atgc_age_threshold maps to {struct atgc_management}->age_threshold,
which is a 64-bit integer, but its sysfs interface cannot correctly set
values larger than UINT_MAX.
The root causes are:
1. __sbi_store() treats all default values as unsigned int, which
prevents updating integers larger than 4 bytes and causes out-of-bounds
writes for integers smaller than 4 bytes.
2. f2fs_sbi_show() also assumes all default values are unsigned int,
leading to out-of-bounds reads and incorrect access to integers larger
than 4 bytes.
This patch introduces {struct f2fs_attr}->size to record the actual size
of the integer associated with each sysfs attribute. With this
information, sysfs read and write operations can correctly access and
update values according to their real data size, avoiding memory
corruption and truncation.
Fixes: b59d0bae6c ("f2fs: add sysfs support for controlling the gc_thread")
Cc: stable@kernel.org
Signed-off-by: Jinbao Liu <liujinbao1@xiaomi.com>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7633a7387e upstream.
During SPO tests, when mounting F2FS, an -EINVAL error was returned from
f2fs_recover_inode_page. The issue occurred under the following scenario
Thread A Thread B
f2fs_ioc_commit_atomic_write
- f2fs_do_sync_file // atomic = true
- f2fs_fsync_node_pages
: last_folio = inode folio
: schedule before folio_lock(last_folio) f2fs_write_checkpoint
- block_operations// writeback last_folio
- schedule before f2fs_flush_nat_entries
: set_fsync_mark(last_folio, 1)
: set_dentry_mark(last_folio, 1)
: folio_mark_dirty(last_folio)
- __write_node_folio(last_folio)
: f2fs_down_read(&sbi->node_write)//block
- f2fs_flush_nat_entries
: {struct nat_entry}->flag |= BIT(IS_CHECKPOINTED)
- unblock_operations
: f2fs_up_write(&sbi->node_write)
f2fs_write_checkpoint//return
: f2fs_do_write_node_page()
f2fs_ioc_commit_atomic_write//return
SPO
Thread A calls f2fs_need_dentry_mark(sbi, ino), and the last_folio has
already been written once. However, the {struct nat_entry}->flag did not
have the IS_CHECKPOINTED set, causing set_dentry_mark(last_folio, 1) and
write last_folio again after Thread B finishes f2fs_write_checkpoint.
After SPO and reboot, it was detected that {struct node_info}->blk_addr
was not NULL_ADDR because Thread B successfully write the checkpoint.
This issue only occurs in atomic write scenarios. For regular file
fsync operations, the folio must be dirty. If
block_operations->f2fs_sync_node_pages successfully submit the folio
write, this path will not be executed. Otherwise, the
f2fs_write_checkpoint will need to wait for the folio write submission
to complete, as sbi->nr_pages[F2FS_DIRTY_NODES] > 0. Therefore, the
situation where f2fs_need_dentry_mark checks that the {struct
nat_entry}->flag /wo the IS_CHECKPOINTED flag, but the folio write has
already been submitted, will not occur.
Therefore, for atomic file fsync, sbi->node_write should be acquired
through __write_node_folio to ensure that the IS_CHECKPOINTED flag
correctly indicates that the checkpoint write has been completed.
Fixes: 608514deba ("f2fs: set fsync mark only for the last dnode")
Cc: stable@kernel.org
Signed-off-by: Sheng Yong <shengyong1@xiaomi.com>
Signed-off-by: Jinbao Liu <liujinbao1@xiaomi.com>
Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 120adae7b4 upstream.
The UFX_IOCTL_REPORT_DAMAGE ioctl does not properly copy data from
userspace to kernelspace, and instead directly references the memory,
which can cause problems if invalid data is passed from userspace. Fix
this all up by correctly copying the memory before accessing it within
the kernel.
Reported-by: Tianchu Chen <flynnnchen@tencent.com>
Cc: stable <stable@kernel.org>
Cc: Steve Glendinning <steve.glendinning@shawell.net>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0209e21e3c upstream.
A userspace program can trigger the RIVA NV3 arbitration code by calling
the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver
recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz
(derived from the PRAMDAC MCLK PLL) as a divisor without validating it
first.
In a normal setup, state->mclk_khz is provided by the real hardware and is
non-zero. However, an attacker can construct a malicious or misconfigured
device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL
configuration, causing state->mclk_khz to become zero. Once
nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns
calculation causes a divide error and crashes the kernel.
Fix this by checking whether state->mclk_khz is zero and bailing out before
doing the division.
The following log reveals it:
rivafb: setting virtual Y resolution to 2184
divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline]
RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546
Call Trace:
nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603
nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline]
CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246
riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779
rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196
fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188
__x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit b1bcaed1e3 ("cpuset: Treat cpusets in attaching as populated")
was backported to the long‑term support (LTS) branches. However, because
commit d5cf4d34a3 ("cgroup/cpuset: Don't track # of local child
partitions") was not backported, a corresponding adaptation to the
backported code is still required.
To ensure correct behavior, replace cgroup_is_populated with
cpuset_is_populated in the partition_is_populated function.
Cc: stable@vger.kernel.org # 6.1+
Fixes: b1bcaed1e3 ("cpuset: Treat cpusets in attaching as populated")
Cc: Waiman Long <longman@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ec5ac4ca2 upstream.
kasan_init_generic() indicates that kasan is fully initialized, so it
should be put at end of kasan_init().
Otherwise bringing up the primary CPU failed when CONFIG_KASAN is set
on PTW-enabled systems, here are the call chains:
kernel_entry()
start_kernel()
setup_arch()
kasan_init()
kasan_init_generic()
The reason is PTW-enabled systems have speculative accesses which means
memory accesses to the shadow memory after kasan_init() may be executed
by hardware before. However, accessing shadow memory is safe only after
kasan fully initialized because kasan_init() uses a temporary PGD table
until we have populated all levels of shadow page tables and writen the
PGD register. Moving kasan_init_generic() later can defer the occasion
of kasan_enabled(), so as to avoid speculative accesses on shadow pages.
After moving kasan_init_generic() to the end, kasan_init() can no longer
call kasan_mem_to_shadow() for shadow address conversion because it will
always return kasan_early_shadow_page. On the other hand, we should keep
the current logic of kasan_mem_to_shadow() for both the early and final
stage because there may be instrumentation before kasan_init().
To solve this, we factor out a new mem_to_shadow() function from current
kasan_mem_to_shadow() for the shadow address conversion in kasan_init().
Cc: stable@vger.kernel.org
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ce720d5bd upstream.
As reported, ever since commit 1013af4f58 ("mm/hugetlb: fix
huge_pmd_unshare() vs GUP-fast race") we can end up in some situations
where we perform so many IPI broadcasts when unsharing hugetlb PMD page
tables that it severely regresses some workloads.
In particular, when we fork()+exit(), or when we munmap() a large
area backed by many shared PMD tables, we perform one IPI broadcast per
unshared PMD table.
There are two optimizations to be had:
(1) When we process (unshare) multiple such PMD tables, such as during
exit(), it is sufficient to send a single IPI broadcast (as long as
we respect locking rules) instead of one per PMD table.
Locking prevents that any of these PMD tables could get reused before
we drop the lock.
(2) When we are not the last sharer (> 2 users including us), there is
no need to send the IPI broadcast. The shared PMD tables cannot
become exclusive (fully unshared) before an IPI will be broadcasted
by the last sharer.
Concurrent GUP-fast could walk into a PMD table just before we
unshared it. It could then succeed in grabbing a page from the
shared page table even after munmap() etc succeeded (and supressed
an IPI). But there is not difference compared to GUP-fast just
sleeping for a while after grabbing the page and re-enabling IRQs.
Most importantly, GUP-fast will never walk into page tables that are
no-longer shared, because the last sharer will issue an IPI
broadcast.
(if ever required, checking whether the PUD changed in GUP-fast
after grabbing the page like we do in the PTE case could handle
this)
So let's rework PMD sharing TLB flushing + IPI sync to use the mmu_gather
infrastructure so we can implement these optimizations and demystify the
code at least a bit. Extend the mmu_gather infrastructure to be able to
deal with our special hugetlb PMD table sharing implementation.
To make initialization of the mmu_gather easier when working on a single
VMA (in particular, when dealing with hugetlb), provide
tlb_gather_mmu_vma().
We'll consolidate the handling for (full) unsharing of PMD tables in
tlb_unshare_pmd_ptdesc() and tlb_flush_unshared_tables(), and track
in "struct mmu_gather" whether we had (full) unsharing of PMD tables.
Because locking is very special (concurrent unsharing+reuse must be
prevented), we disallow deferring flushing to tlb_finish_mmu() and instead
require an explicit earlier call to tlb_flush_unshared_tables().
From hugetlb code, we call huge_pmd_unshare_flush() where we make sure
that the expected lock protecting us from concurrent unsharing+reuse is
still held.
Check with a VM_WARN_ON_ONCE() in tlb_finish_mmu() that
tlb_flush_unshared_tables() was properly called earlier.
Document it all properly.
Notes about tlb_remove_table_sync_one() interaction with unsharing:
There are two fairly tricky things:
(1) tlb_remove_table_sync_one() is a NOP on architectures without
CONFIG_MMU_GATHER_RCU_TABLE_FREE.
Here, the assumption is that the previous TLB flush would send an
IPI to all relevant CPUs. Careful: some architectures like x86 only
send IPIs to all relevant CPUs when tlb->freed_tables is set.
The relevant architectures should be selecting
MMU_GATHER_RCU_TABLE_FREE, but x86 might not do that in stable
kernels and it might have been problematic before this patch.
Also, the arch flushing behavior (independent of IPIs) is different
when tlb->freed_tables is set. Do we have to enlighten them to also
take care of tlb->unshared_tables? So far we didn't care, so
hopefully we are fine. Of course, we could be setting
tlb->freed_tables as well, but that might then unnecessarily flush
too much, because the semantics of tlb->freed_tables are a bit
fuzzy.
This patch changes nothing in this regard.
(2) tlb_remove_table_sync_one() is not a NOP on architectures with
CONFIG_MMU_GATHER_RCU_TABLE_FREE that actually don't need a sync.
Take x86 as an example: in the common case (!pv, !X86_FEATURE_INVLPGB)
we still issue IPIs during TLB flushes and don't actually need the
second tlb_remove_table_sync_one().
This optimized can be implemented on top of this, by checking e.g., in
tlb_remove_table_sync_one() whether we really need IPIs. But as
described in (1), it really must honor tlb->freed_tables then to
send IPIs to all relevant CPUs.
Notes on TLB flushing changes:
(1) Flushing for non-shared PMD tables
We're converting from flush_hugetlb_tlb_range() to
tlb_remove_huge_tlb_entry(). Given that we properly initialize the
MMU gather in tlb_gather_mmu_vma() to be hugetlb aware, similar to
__unmap_hugepage_range(), that should be fine.
(2) Flushing for shared PMD tables
We're converting from various things (flush_hugetlb_tlb_range(),
tlb_flush_pmd_range(), flush_tlb_range()) to tlb_flush_pmd_range().
tlb_flush_pmd_range() achieves the same that
tlb_remove_huge_tlb_entry() would achieve in these scenarios.
Note that tlb_remove_huge_tlb_entry() also calls
__tlb_remove_tlb_entry(), however that is only implemented on
powerpc, which does not support PMD table sharing.
Similar to (1), tlb_gather_mmu_vma() should make sure that TLB
flushing keeps on working as expected.
Further, note that the ptdesc_pmd_pts_dec() in huge_pmd_share() is not a
concern, as we are holding the i_mmap_lock the whole time, preventing
concurrent unsharing. That ptdesc_pmd_pts_dec() usage will be removed
separately as a cleanup later.
There are plenty more cleanups to be had, but they have to wait until
this is fixed.
[david@kernel.org: fix kerneldoc]
Link: https://lkml.kernel.org/r/f223dd74-331c-412d-93fc-69e360a5006c@kernel.org
Link: https://lkml.kernel.org/r/20251223214037.580860-5-david@kernel.org
Fixes: 1013af4f58 ("mm/hugetlb: fix huge_pmd_unshare() vs GUP-fast race")
Signed-off-by: David Hildenbrand (Red Hat) <david@kernel.org>
Reported-by: "Uschakow, Stanislav" <suschako@amazon.de>
Closes: https://lore.kernel.org/all/4d3878531c76479d9f8ca9789dc6485d@amazon.de/
Tested-by: Laurence Oberman <loberman@redhat.com>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Liu Shixin <liushixin2@huawei.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rik van Riel <riel@surriel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David Hildenbrand (Arm) <david@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be0b304eeb upstream.
The endpoint IDs in the display graph are expected to match the
associated display path number, i.e. all endpoints connected to
mmsys_ep_main must have reg = <0> and all endpoints connected to
mmsys_ep_ext must have reg = <1>.
Add the missing ID to all endpoints in the display graph, based on
mt8365.dtsi as an existing example that does this correctly.
Fixes: e72d63fa05 ("arm64: dts: mediatek: mt8183: Migrate to display controller OF graph")
Reported-by: Evans Jahja <evansjahja13@gmail.com>
Closes: https://lore.kernel.org/linux-mediatek/CAAq5pW9o3itC0G16LnJO7KMAQ_XoqXUpB=cuJ_7e3-H11zKd5Q@mail.gmail.com/
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Otto Pflüger <otto.pflueger@abscue.de>
[Angelo: Fixed dtbs_check issues]
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit c62e0658d4 ]
Since commit 9880702d12 ("ACPI: property: Support using strings in
reference properties") it is possible to use strings instead of local
references. This work fine with single GPIO but not with arrays as
acpi_gpio_package_count() didn't handle this case. Update it to handle
strings like local references to cover this case as well.
Signed-off-by: Alban Bedel <alban.bedel@lht.dlh.de>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://patch.msgid.link/20260129145944.3372777-1-alban.bedel@lht.dlh.de
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 38cfdd9dd2 ]
Add cond_resched() in those dump loops, just in case a lot of entries
are being dumped. And detect invalid CQ ring head/tail entries, to avoid
iterating more than what is necessary. Generally not an issue, but can be
if things like KASAN or other debugging metrics are enabled.
Reported-by: 是参差 <shicenci@gmail.com>
Link: https://lore.kernel.org/all/PS1PPF7E1D7501FE5631002D242DD89403FAB9BA@PS1PPF7E1D7501F.apcprd02.prod.outlook.com/
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f514248727 ]
fsl_xcvr_activate_ctl() has
lockdep_assert_held(&card->snd_card->controls_rwsem),
but fsl_xcvr_mode_put() calls it without acquiring this lock.
Other callers of fsl_xcvr_activate_ctl() in fsl_xcvr_startup() and
fsl_xcvr_shutdown() properly acquire the lock with down_read()/up_read().
Add the missing down_read()/up_read() calls around fsl_xcvr_activate_ctl()
in fsl_xcvr_mode_put() to fix the lockdep assertion and prevent potential
race conditions when multiple userspace threads access the control.
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260202174112.2018402-1-n7l8m4@u.northwestern.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84962445cd ]
There is nothing wrong if in_shaper_func type is DISTRIBUTED POINTS.
Remove the assert placed for a TODO to avoid misinterpretations.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1714dcc4c2)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d25b32aa82 ]
Commit 27fc10d109 ("drm/amd/display: Fix the delta clamping for shaper
LUT") fixed banding when using plane shaper LUT in DCN10 CM helper. The
problem is also present in DCN30 CM helper, fix banding by extending the
same bug delta clamping fix to CM3.
Signed-off-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0274a54897)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daafcc0ef0 ]
The dma_map_sg tracepoint can trigger a perf buffer overflow when
tracing large scatter-gather lists. With devices like virtio-gpu
creating large DRM buffers, nents can exceed 1000 entries, resulting
in:
phys_addrs: 1000 * 8 bytes = 8,000 bytes
dma_addrs: 1000 * 8 bytes = 8,000 bytes
lengths: 1000 * 4 bytes = 4,000 bytes
Total: ~20,000 bytes
This exceeds PERF_MAX_TRACE_SIZE (8192 bytes), causing:
WARNING: CPU: 0 PID: 5497 at kernel/trace/trace_event_perf.c:405
perf buffer not large enough, wanted 24620, have 8192
Cap all three dynamic arrays at 128 entries using min() in the array
size calculation. This ensures arrays are only as large as needed
(up to the cap), avoiding unnecessary memory allocation for small
operations while preventing overflow for large ones.
The tracepoint now records the full nents/ents counts and a truncated
flag so users can see when data has been capped.
Changes in v2:
- Use min(nents, DMA_TRACE_MAX_ENTRIES) for dynamic array sizing
instead of fixed DMA_TRACE_MAX_ENTRIES allocation (feedback from
Steven Rostedt)
- This allocates only what's needed up to the cap, avoiding waste
for small operations
Reported-by: syzbot+28cea38c382fd15e751a@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=28cea38c382fd15e751a
Tested-by: syzbot+28cea38c382fd15e751a@syzkaller.appspotmail.com
Signed-off-by: Deepanshu Kartikey <Kartikey406@gmail.com>
Reviwed-by: Sean Anderson <sean.anderson@linux.dev>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260130155215.69737-1-kartikey406@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e77a4081d7 ]
The load detection process for 3-pole jacks requires slightly
updated reference values to ensure an accurate result. Update
the code to apply different tunings for the 3-pole and 4-pole
cases. This also updates the thresholds overall so update the
relevant comments to match.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260130150927.2964664-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43b0b7eff4 ]
The acpi_pcc_hotkey_add() error path leaks sysfs group pcc_attr_group
if platform_device_register_simple() fails for the "panasonic" platform
device.
Address this by making it call sysfs_remove_group() in that case for
the group in question.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3398370.44csPzL39Z@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1425900231 ]
Add a quirk for a Lenovo laptop (SSID: 0x17aa3821) to allow using sidecar
CS35L57 amps with CS42L43 codec.
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://patch.msgid.link/20260128092410.1540583-1-mstrozek@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b4e00d8e7 ]
The MECHREVO Wujie 15X Pro suffers from spurious IRQ issues related to
the AMD PMC. Add it to the quirk list to use the spurious_8042 fix.
Signed-off-by: gongqi <550230171hxy@gmail.com>
Link: https://patch.msgid.link/20260122155501.376199-4-550230171hxy@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 611c7d2262 ]
Fix the missing mic on HP 200 G2a 16 by adding quirk with the
board ID 8EE4
Signed-off-by: Dirk Su <dirk.su@canonical.com>
Link: https://patch.msgid.link/20260129065038.39349-1-dirk.su@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b641122d3 ]
Add DMI entry for Huawei Matebook D (BOD-WXX9) with HEADPHONE_GPIO
and DMIC quirks.
This device has ES8336 codec with:
- GPIO 16 (headphone-enable) for headphone amplifier control
- GPIO 17 (speakers-enable) for speaker amplifier control
- GPIO 269 for jack detection IRQ
- 2-channel DMIC
Hardware investigation shows that both GPIO 16 and 17 are required
for proper audio routing, as headphones and speakers share the same
physical output (HPOL/HPOR) and are separated only via amplifier
enable signals.
RFC: Seeking advice on GPIO control issue:
GPIO values change in driver (gpiod_get_value() shows logical value
changes) but not physically (debugfs gpio shows no change). The same
gpiod_set_value_cansleep() calls work correctly in probe context with
msleep(), but fail when called from DAPM event callbacks.
Context information from diagnostics:
- in_atomic=0, in_interrupt=0, irqs_disabled=0
- Process context: pipewire
- GPIO 17 (speakers): changes in driver, no physical change
- GPIO 16 (headphone): changes in driver, no physical change
In Windows, audio switching works without visible GPIO changes,
suggesting possible ACPI/firmware involvement.
Any suggestions on how to properly control these GPIOs from DAPM
events would be appreciated.
Signed-off-by: Tagir Garaev <tgaraev653@gmail.com>
Link: https://patch.msgid.link/20260201121728.16597-1-tgaraev653@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fe747d7112 ]
In a few places in the Classmate laptop driver, code using the accel
object may run before that object's address is stored in the driver
data of the input device using it.
For example, cmpc_accel_sensitivity_store_v4() is the "show" method
of cmpc_accel_sensitivity_attr_v4 which is added in cmpc_accel_add_v4(),
before calling dev_set_drvdata() for inputdev->dev. If the sysfs
attribute is accessed prematurely, the dev_get_drvdata(&inputdev->dev)
call in in cmpc_accel_sensitivity_store_v4() returns NULL which
leads to a NULL pointer dereference going forward.
Moreover, sysfs attributes using the input device are added before
initializing that device by cmpc_add_acpi_notify_device() and if one
of them is accessed before running that function, a NULL pointer
dereference will occur.
For example, cmpc_accel_sensitivity_attr_v4 is added before calling
cmpc_add_acpi_notify_device() and if it is read prematurely, the
dev_get_drvdata(&acpi->dev) call in cmpc_accel_sensitivity_show_v4()
returns NULL which leads to a NULL pointer dereference going forward.
Fix this by adding NULL pointer checks in all of the relevant places.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/12825381.O9o76ZdvQC@rafael.j.wysocki
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
