PSC controller has a limitation that it can only power-up the second core
when the first core is in ON state. Power-state for core0 should be equal
to or higher than core1, else the kernel is seen hanging during rproc
loading.
Make the powering up of cores sequential, by waiting for the current core
to power-up before proceeding to the next core, with a timeout of 2sec.
Add a wait queue event in k3_r5_cluster_rproc_init call, that will wait
for the current core to be released from reset before proceeding with the
next core.
Fixes: 6dedbd1d54 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Apurva Nandan <a-nandan@ti.com>
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240430105307.1190615-2-b-padhi@ti.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Adding kprobe session attach type name to attach_type_name,
so libbpf_bpf_attach_type_str returns proper string name for
BPF_TRACE_KPROBE_SESSION attach type.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-6-jolsa@kernel.org
Adding support to attach program in kprobe session mode
with bpf_program__attach_kprobe_multi_opts function.
Adding session bool to bpf_kprobe_multi_opts struct that allows
to load and attach the bpf program via kprobe session.
the attachment to create kprobe multi session.
Also adding new program loader section that allows:
SEC("kprobe.session/bpf_fentry_test*")
and loads/attaches kprobe program as kprobe session.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-5-jolsa@kernel.org
Adding support for cookie within the session of kprobe multi
entry and return program.
The session cookie is u64 value and can be retrieved be new
kfunc bpf_session_cookie, which returns pointer to the cookie
value. The bpf program can use the pointer to store (on entry)
and load (on return) the value.
The cookie value is implemented via fprobe feature that allows
to share values between entry and return ftrace fprobe callbacks.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-4-jolsa@kernel.org
Adding struct bpf_session_run_ctx object to hold session related
data, which is atm is_return bool and data pointer coming in
following changes.
Placing bpf_session_run_ctx layer in between bpf_run_ctx and
bpf_kprobe_multi_run_ctx so the session data can be retrieved
regardless of if it's kprobe_multi or uprobe_multi link, which
support is coming in future. This way both kprobe_multi and
uprobe_multi can use same kfuncs to access the session data.
Adding bpf_session_is_return kfunc that returns true if the
bpf program is executed from the exit probe of the kprobe multi
link attached in wrapper mode. It returns false otherwise.
Adding new kprobe hook for kprobe program type.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-3-jolsa@kernel.org
Adding support to attach bpf program for entry and return probe
of the same function. This is common use case which at the moment
requires to create two kprobe multi links.
Adding new BPF_TRACE_KPROBE_SESSION attach type that instructs
kernel to attach single link program to both entry and exit probe.
It's possible to control execution of the bpf program on return
probe simply by returning zero or non zero from the entry bpf
program execution to execute or not the bpf program on return
probe respectively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240430112830.1184228-2-jolsa@kernel.org
Currently we allocate all 3 levels of radix3 page tables using
nvkm_gsp_mem_ctor(), which uses dma_alloc_coherent() for allocating all of
the relevant memory. This can end up failing in scenarios where the system
has very high memory fragmentation, and we can't find enough contiguous
memory to allocate level 2 of the page table.
Currently, this can result in runtime PM issues on systems where memory
fragmentation is high - as we'll fail to allocate the page table for our
suspend/resume buffer:
kworker/10:2: page allocation failure: order:7, mode:0xcc0(GFP_KERNEL),
nodemask=(null),cpuset=/,mems_allowed=0
CPU: 10 PID: 479809 Comm: kworker/10:2 Not tainted
6.8.6-201.ChopperV6.fc39.x86_64 #1
Hardware name: SLIMBOOK Executive/Executive, BIOS N.1.10GRU06 02/02/2024
Workqueue: pm pm_runtime_work
Call Trace:
<TASK>
dump_stack_lvl+0x64/0x80
warn_alloc+0x165/0x1e0
? __alloc_pages_direct_compact+0xb3/0x2b0
__alloc_pages_slowpath.constprop.0+0xd7d/0xde0
__alloc_pages+0x32d/0x350
__dma_direct_alloc_pages.isra.0+0x16a/0x2b0
dma_direct_alloc+0x70/0x270
nvkm_gsp_radix3_sg+0x5e/0x130 [nouveau]
r535_gsp_fini+0x1d4/0x350 [nouveau]
nvkm_subdev_fini+0x67/0x150 [nouveau]
nvkm_device_fini+0x95/0x1e0 [nouveau]
nvkm_udevice_fini+0x53/0x70 [nouveau]
nvkm_object_fini+0xb9/0x240 [nouveau]
nvkm_object_fini+0x75/0x240 [nouveau]
nouveau_do_suspend+0xf5/0x280 [nouveau]
nouveau_pmops_runtime_suspend+0x3e/0xb0 [nouveau]
pci_pm_runtime_suspend+0x67/0x1e0
? __pfx_pci_pm_runtime_suspend+0x10/0x10
__rpm_callback+0x41/0x170
? __pfx_pci_pm_runtime_suspend+0x10/0x10
rpm_callback+0x5d/0x70
? __pfx_pci_pm_runtime_suspend+0x10/0x10
rpm_suspend+0x120/0x6a0
pm_runtime_work+0x98/0xb0
process_one_work+0x171/0x340
worker_thread+0x27b/0x3a0
? __pfx_worker_thread+0x10/0x10
kthread+0xe5/0x120
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
Luckily, we don't actually need to allocate coherent memory for the page
table thanks to being able to pass the GPU a radix3 page table for
suspend/resume data. So, let's rewrite nvkm_gsp_radix3_sg() to use the sg
allocator for level 2. We continue using coherent allocations for lvl0 and
1, since they only take a single page.
V2:
* Don't forget to actually jump to the next scatterlist when we reach the
end of the scatterlist we're currently on when writing out the page table
for level 2
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Ben Skeggs <bskeggs@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240429182318.189668-2-lyude@redhat.com
Add an IPI command definition for communication with IMGSYS through
SCP mailbox.
Signed-off-by: Olivia Wen <olivia.wen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240430011534.9587-5-olivia.wen@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
The SCP on different chips will require different DRAM sizes and IPI
shared buffer sizes based on varying requirements.
Signed-off-by: Olivia Wen <olivia.wen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240430011534.9587-4-olivia.wen@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
MT8188 SCP has two RISC-V cores which is similar to MT8195 but without
L1TCM. We've added MT8188-specific functions to configure L1TCM in
multicore setups.
Signed-off-by: Olivia Wen <olivia.wen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240430011534.9587-3-olivia.wen@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Under different applications, the MT8188 SCP can be used as single-core
or dual-core.
Signed-off-by: Olivia Wen <olivia.wen@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240430011534.9587-2-olivia.wen@mediatek.com
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Unfortunately both Lenovo Legion Pro 7 16ARX8H and Legion 7i 16IAX7
got the very same PCI SSID while the hardware implementations are
completely different (the former is with TI TAS2781 codec while the
latter is with Cirrus CS35L41 codec). The former model got broken by
the recent fix for the latter model.
For addressing the regression, check the codec SSID and apply the
proper quirk for each model now.
Fixes: 24b6332c2d ("ALSA: hda: Add Lenovo Legion 7i gen7 sound quirk")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.suse.com/show_bug.cgi?id=1223462
Message-ID: <20240430163206.5200-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There is a chance of damaging the IC when S4 resume.
Add safe mode for no stream to disable GPIO3.
Thinkpad with ALC1318 platform need to add this workaround.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Link: https://lore.kernel.org/r/a853dc4f0a4e412381d5f60565181247@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a helper to access main VEB:
i40e_pf_get_main_veb(pf) replaces 'pf->veb[pf->lan_veb]'
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In the driver code there are 3 types of checks whether given
VSI is main or not:
1. vsi->type ==/!= I40E_VSI_MAIN
2. vsi ==/!= pf->vsi[pf->lan_vsi]
3. vsi->seid ==/!= pf->vsi[pf->lan_vsi]->seid
All of them are equivalent and can be consolidated. Convert cases
2 and 3 to case 1.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add simple helper i40e_pf_get_main_vsi(pf) to access main VSI
that replaces pattern 'pf->vsi[pf->lan_vsi]'
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 07d44190a3 ("i40e/i40evf: Detect and recover hung queue
scenario") changes i40e_detect_recover_hung() argument type from
i40e_pf* to i40e_vsi* to be shareable by both i40e and i40evf.
Because the i40evf does not exist anymore and the function is
exclusively used by i40e we can revert this change.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit 0ef2d5afb1 ("i40e: KISS the client interface") simplified
the client interface so in practice it supports only one client
per i40e netdev. But we have still 2 notification functions that
uses as parameter a pointer to VSI of netdevice associated with
the client. After the mentioned commit only possible and used
VSI is the main (LAN) VSI.
So refactor these functions so they are called with PF pointer argument
and the associated VSI (LAN) is taken inside them.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The field is initialized always to zero and it is never read.
Remove it.
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
If a DMI table entry is shorter than 4 bytes, it is invalid. Due to
how DMI table parsing works, it is impossible to safely recover from
such an error, so we have to stop decoding the table.
Signed-off-by: Jean Delvare <jdelvare@suse.de>
Link: https://lore.kernel.org/linux-kernel/Zh2K3-HLXOesT_vZ@liuwe-devbox-debian-v2/T/
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
interacting with "usb: misc: onboard_usb_hub: Disable the USB hub clock
on failure"
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20240424161202.7e45e19e@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following is an automated shortlog grouped by driver:
ISST:
- Add Grand Ridge to HPM CPU list
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCZjDU5gAKCRBZrE9hU+XO
MZ2AAQDnIbtjpXextnK0deQIBPRuaxs5DKCpfM1AaCcoL3eAjAD/aprHeZL+CXwV
FRMPAbEcgHzhYinOpEmzA9s+vpA9ZQY=
=inMy
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Ilpo Järvinen:
- Add Grand Ridge to HPM CPU list
* tag 'platform-drivers-x86-v6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ISST: Add Grand Ridge to HPM CPU list
Testing ohci functionality with qemu's pci-ohci emulation often results
in ohci interface stalls, resulting in hung task timeouts.
The problem is caused by lost interrupts between the emulation and the
Linux kernel code. Additional interrupts raised while the ohci interrupt
handler in Linux is running and before the handler clears the interrupt
status are not handled. The fix for a similar problem in ehci suggests
that the problem is likely caused by edge-triggered MSI interrupts. See
commit 0b60557230 ("usb: ehci: Prevent missed ehci interrupts with
edge-triggered MSI") for details.
Ensure that the ohci interrupt code handles all pending interrupts before
returning to solve the problem.
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: David Laight <David.Laight@aculab.com>
Cc: stable@vger.kernel.org
Fixes: 306c54d0ed ("usb: hcd: Try MSI interrupts on PCI devices")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Link: https://lore.kernel.org/r/20240429154010.1507366-1-linux@roeck-us.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Fix a double-free in the pinctrl_enable() errorpath.
- Fix a refcount leak in pinctrl_dt_to_map().
- Fix selecting the GPIO pin control state and the UART3
pin config group in the Intel Baytrail driver.
- Fix readback of schmitt trigger status in the Mediatek
Paris driver, along with some semantic pin config issues
in this driver.
- Fix a pin suffix typo in the Meson A1 driver.
- Fix an erroneous register offset in he Aspeed G6 driver.
- Fix an inconsistent lock state and the interrupt type on
resume in the Renesas RZG2L driver.
- Fix some minor confusion in the Renesas DT bindings.
-----BEGIN PGP SIGNATURE-----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=BG4d
-----END PGP SIGNATURE-----
Merge tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix a double-free in the pinctrl_enable() errorpath
- Fix a refcount leak in pinctrl_dt_to_map()
- Fix selecting the GPIO pin control state and the UART3 pin config
group in the Intel Baytrail driver
- Fix readback of schmitt trigger status in the Mediatek Paris driver,
along with some semantic pin config issues in this driver
- Fix a pin suffix typo in the Meson A1 driver
- Fix an erroneous register offset in he Aspeed G6 driver
- Fix an inconsistent lock state and the interrupt type on resume in
the Renesas RZG2L driver
- Fix some minor confusion in the Renesas DT bindings
* tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: renesas: rzg2l: Configure the interrupt type on resume
pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map()
pinctrl: baytrail: Add pinconf group for uart3
pinctrl: baytrail: Fix selecting gpio pinctrl state
pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE
pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback
pinctrl: core: delete incorrect free in pinctrl_enable()
pinctrl/meson: fix typo in PDM's pin name
pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T
pinctrl: renesas: rzg2l: Execute atomically the interrupt configuration
dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input' and 'output-enable' properties
Adding UAPI support for CXL r3.1 8.2.9.5.4
Clear Log command.
This proposed patch will be useful for clearing and populating
the Vendor debug log in certain scenarios, allowing for the
aggregation of results over time.
Signed-off-by: Srinivasulu Thanneeru <sthanneeru.opensrc@micron.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240313071218.729-3-sthanneeru.opensrc@micron.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Jakub Kicinski says:
====================
selftests: net: page_poll allocation error injection
Add a test for exercising driver memory allocation failure paths.
page pool is a bit tricky to inject errors into at the page allocator
level because of the bulk alloc and recycling, so add explicit error
injection support "in front" of the caches.
Add a test to exercise that using only the standard APIs.
This is the first useful test for the new tests with an endpoint.
There's no point testing netdevsim here, so this is also the first
HW-only test in Python.
I'm not super happy with the traffic generation using iperf3,
my initial approach was to use mausezahn. But it turned out to be
5x slower in terms of PPS. Hopefully this is good enough for now.
v1: https://lore.kernel.org/all/20240426232400.624864-1-kuba@kernel.org/
====================
Link: https://lore.kernel.org/r/20240429144426.743476-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Bugs in memory allocation failure paths are quite common.
Add a test exercising those paths based on qstat and page pool
failure hook.
Running on bnxt:
# ./drivers/net/hw/pp_alloc_fail.py
KTAP version 1
1..1
# ethtool -G change retval: success
ok 1 pp_alloc_fail.test_pp_alloc
# Totals: pass:1 fail:0 xfail:0 xpass:0 skip:0 error:0
I initially wrote this test to validate commit be43b7489a ("net/mlx5e:
RX, Fix page_pool allocation failure recovery for striding rq") but mlx5
still doesn't have qstat. So I run it on bnxt, and while bnxt survives
I found the problem fixed in commit 7301177307 ("eth: bnxt: fix counting
packets discarded due to OOM and netpoll").
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240429144426.743476-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While we are not very interested in testing performance
it's useful to be able to generate a lot of traffic.
iperf is the simplest way of getting relatively high PPS.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240429144426.743476-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When picking TCP ports to use, avoid all below 10k.
This should lower the chance of collision or running
afoul whatever random policies may be on the host.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240429144426.743476-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The main use of the ip() wrapper over cmd() is that it can parse JSON.
cmd("ip -j link show") will return stdout as a string, and test has
to call json.loads(). With ip("link show", json=True) the return value
will be already parsed.
More tools (ethtool, bpftool etc.) support the --json switch.
To avoid having to wrap all of them individually create a tool()
helper.
Switch from -j to --json (for ethtool).
While at it consume the netns attribute at the ip() level.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240429144426.743476-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We created a separate directory for HW-only tests, recently.
Glue in the Python test library there, Python is a bit annoying
when it comes to using library code located "lower"
in the directory structure.
Reuse the Env class, but let tests require non-nsim setup.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240429144426.743476-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Because of caching / recycling using the general page allocation
failures to induce errors in page pool allocation is very hard.
Add direct error injection support to page_pool_alloc_pages().
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240429144426.743476-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub reports that some tests fail on netdev CI when executed in a debug
kernel.
Increase test timeout to 30m, this should hopefully be enough.
Also reduce test duration where possible for "slow" machines.
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240429105736.22677-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'unsigned long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430114142.28551-9-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'unsigned long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240430114142.28551-8-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'unsigned long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20240430114142.28551-7-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430114142.28551-6-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430114142.28551-5-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240430114142.28551-4-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430114142.28551-3-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a confusing pattern in the kernel to use a variable named 'timeout' to
store the result of wait_for_completion_timeout() causing patterns like:
timeout = wait_for_completion_timeout(...)
if (!timeout) return -ETIMEDOUT;
with all kinds of permutations. Use 'time_left' as a variable to make the code
self explaining.
Fix to the proper variable type 'unsigned long' while here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20240430114142.28551-2-wsa+renesas@sang-engineering.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The FLT pin was incorrected documented as an output. The MAX8903 uses it to
signal to the processor that a charging fault has occurred.
Signed-off-by: Herman van Hazendonk <github.com@herrie.org>
Link: https://lore.kernel.org/r/20240415151645.1986014-1-github.com@herrie.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Introduce support for SPI-NAND driver of the Airoha NAND Flash Interface
found on Airoha ARM SoCs.
Tested-by: Rajeev Kumar <Rajeev.Kumar@airoha.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/6c9db20505b01a66807995374f2af475a23ce5b2.1714377864.git.lorenzo@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
