As pointed out by Krzysztof "Board should not bring new CPU nodes.
Override by label instead."
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Use "audio-codec" as the codec dt node name, and "sound" as the simple
audio card dt name.
Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add device tree bindings for the Milkv Mars board which is
equipped with StarFive JH7110 SoC.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Add the 'cpus' label so that we can reference it in board dts files.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
plus the accompanying reproducer.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmYxL8UUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNZWAf/TgdtQnrMRhiu/0z8S8gGx0CZwl0q
bgEqqCLwtX7s9969nd4VH7JNldj1hA4stIZPJdJICpnAaShfJ0Mn9p39YxJsRHmQ
mzCpLLHoe5vD7EmLNohFxkPk0SffgidudbLjjNxI7s9gqpU+yuu02odYqHxLZKJR
Zu8LfciaW0lC1HgJBFMaFs00xEWgAar97eQL6VFGI3a8hAjDFaqHExJvzMZknXUO
+66u12/xDVUFjNRfTHY45Jl1IS6zcsEe9gC4SanNZTl5FIBpJIQKyqdkhAzC1r4T
/S3CeHZfZ/ZGI3oQV/8Sbu/aLgUMubAChhSHjpJVyHQOURT08emk+jY5tA==
=I/xT
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fix from Paolo Bonzini:
"A pretty straightforward fix for a NULL pointer dereference, plus the
accompanying reproducer"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Add test for uaccesses to non-existent vgic-v2 CPUIF
KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()
The return value of _STA with the "present" bit unset and the "enabled"
bit set is clearly invalid as per the ACPI specification, Section 6.3.7
"_STA (Device Status)", so make the ACPI device enumeration code
disregard devices with such _STA return values.
Also, because this implies that status.enabled will only be set if
status.present is set too, acpi_device_is_enabled() can be modified
to simply return the value of the former.
Link: https://uefi.org/specs/ACPI/6.5/06_Device_Configuration.html#sta-device-status
Link: https://lore.kernel.org/linux-acpi/88179311a503493099028c12ca37d430@huawei.com/
Suggested-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
The function acpi_blacklisted() is defined only when CONFIG_X86 is
enabled and is only used by X86 arch code. To align with its usage and
definition conditions, move its declaration to asm/acpi.h
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
[ rjw: Added empty code line in a header file ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
User space may need to know which region, if any, maps the DPAs
(device physical addresses) reported in a cxl_general_media or
cxl_dram event. Since the mapping can change, the kernel provides
this information at the time the event occurs. This informs user
space that at event <timestamp> this <region> mapped this <DPA>
to this <HPA>.
Add the same region info that is included in the cxl_poison trace
event: the DPA->HPA translation, region name, and region uuid.
The new fields are inserted in the trace event and no existing
fields are modified. If the DPA is not mapped, user will see:
hpa=ULLONG_MAX, region="", and uuid=0
This work must be protected by dpa_rwsem & region_rwsem since
it is looking up region mappings.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/dd8d708b7a7ebfb64a27020a5eb338091336b34d.1714496730.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
This work belongs in the region driver as it is only useful with
CONFIG_CXL_REGION. Add a stub in core.h for when the region driver
is not built.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/183222631f11a43c5e6debc42ec22fe1bd4b818a.1714496730.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
This helper belongs in the region driver as it is only useful
with CONFIG_CXL_REGION. Add a stub in core.h for when the region
driver is not built.
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/05e30f788d62b3dd398aff2d2ea50a6aaa7c3313.1714496730.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The length of Physical Address in General Media and DRAM event
records is 64-bit, so the field mask for extracting the DPA should
be 64-bit also, otherwise the trace event reports DPA's with the
upper 32 bits of a DPA address masked off. If users do DPA-to-HPA
translations this could lead to incorrect page retirement decisions.
Use GENMASK_ULL() for CXL_DPA_MASK to get all the DPA address bits.
Tidy up CXL_DPA_FLAGS_MASK by using GENMASK() to only mask the exact
flag bits.
These bits are defined as part of the event record physical address
descriptions of General Media and DRAM events in CXL Spec 3.1
Section 8.2.9.2 Events.
Fixes: d54a531a43 ("cxl/mem: Trace General Media Event Record")
Co-developed-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Signed-off-by: Shiyang Ruan <ruansy.fnst@fujitsu.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/2867fc43c57720a4a15a3179431829b8dbd2dc16.1714496730.git.alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Like various other Asus Vivobook and Expertbook laptops, the Asus
Vivobook Pro N6506MV has a DSDT table that describes IRQ 1 as ActiveLow
while the kernel is overriding it to Edge_High. This prevents the internal
keyboard from working. This patch prevents this issue by adding this laptop
to the override table that prevents the kernel from overriding this IRQ
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218745
Tested-by: Gianni <gianni.casagrande.mail@gmail.com>
Signed-off-by: Tamim Khan <tamim@fusetak.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit ebb49799c78891cbe370f1264844664a3d8b6f35
AEST V2 was published[1], add V2 support based on AEST V1.
[1]: https://developer.arm.com/documentation/den0085/latest/
Link: ebb4979
Signed-off-by: Ruidong Tian <tianruidong@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Passive polling is enabled by setting the 'passive' field in
struct thermal_zone_device to a positive value so long as the
'passive_delay_jiffies' field is greater than zero. It causes
the thermal core to actively check the thermal zone temperature
periodically which in theory should be done after crossing a
passive trip point on the way up in order to allow governors to
react more rapidly to temperature changes and adjust mitigation
more precisely.
However, the 'passive' field in struct thermal_zone_device is currently
managed by governors which is quite problematic. First of all, only
two governors, Step-Wise and Power Allocator, update that field at
all, so the other governors do not benefit from passive polling,
although in principle they should. Moreover, if the zone governor is
changed from, say, Step-Wise to Fair-Share after 'passive' has been
incremented by the former, it is not going to be reset back to zero by
the latter even if the zone temperature falls down below all passive
trip points.
For this reason, make handle_thermal_trip() increment 'passive'
to enable passive polling for the given thermal zone whenever a
passive trip point is crossed on the way up and decrement it
whenever a passive trip point is crossed on the way down. Also
remove the 'passive' field updates from governors and additionally
clear it in thermal_zone_device_init() to prevent passive polling
from being enabled after a system resume just beacuse it was enabled
before suspending the system.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Make __thermal_zone_device_update() bail out if update_temperature()
fails to update the zone temperature because __thermal_zone_get_temp()
has returned an error and the current zone temperature is
THERMAL_TEMP_INVALID (user space receiving netlink thermal messages,
thermal debug code and thermal governors may get confused otherwise).
Fixes: 9ad18043fb ("thermal: core: Send trip crossing notifications at init time if needed")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Enable RAPL PMU support for TPMI RAPL driver.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce two new APIs rapl_package_add_pmu()/rapl_package_remove_pmu().
RAPL driver can invoke these APIs to expose its supported energy
counters via perf PMU. The new RAPL PMU is fully compatible with current
MSR RAPL PMU, including using the same PMU name and events
name/id/unit/scale, etc.
For example, use below command
perf stat -e power/energy-pkg/ -e power/energy-ram/ FOO
to get the energy consumption if power/energy-pkg/ and power/energy-ram/
events are available in the "perf list" output.
This does not introduce any conflict because TPMI RAPL is the only user
of these APIs currently, and it never co-exists with MSR RAPL.
Note that RAPL Packages can be probed/removed dynamically, and the
events supported by each TPMI RAPL device can be different. Thus the
RAPL PMU support is done on demand, which means
1. PMU is registered only if it is needed by a RAPL Package. PMU events
for unsupported counters are not exposed.
2. PMU is unregistered and registered when a new RAPL Package is probed
and supports new counters that are not supported by current PMU.
For example, on a dual-package system using TPMI RAPL, it is possible
that Package 1 behaves as TPMI domain root and supports Psys domain.
In this case, register PMU without Psys event when probing Package 0,
and re-register the PMU with Psys event when probing Package 1.
3. PMU is unregistered when all registered RAPL Packages don't need PMU.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Notifications may now be linked and thus a single tw can post multiple
CQEs, it's not safe to use LAZY_WAKE with them. Disable LAZY_WAKE for
now, if that'd prove to be a problem we can count them and pass the
expected number of CQEs into __io_req_task_work_add().
Fixes: 6fe4220912 ("io_uring/notif: implement notification stacking")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/0a5accdb7d2d0d27ebec14f8106e14e0192fae17.1714488419.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
SEND[MSG]_ZC produces multiple CQEs via notifications, LAZY_WAKE doesn't
handle it and so disable LAZY_WAKE for sendzc polling. It should be
fine, sends are not likely to be polled in the first place.
Fixes: 6ce4a93dbb ("io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/5b360fb352d91e3aec751d75c87dfb4753a084ee.1714488419.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 12fb28ea6b ("EINJ: Add CXL error type support") adds the header
file include/linux/einj-cxl.h, but then adds a file entry with cxl-einj.h
(note the swapping of words) to the COMPUTE EXPRESS LINK (CXL) section.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.
get_maintainer.pl can only return commit_signer history for file
include/linux/einj-cxl.h because the entry in MAINTAINERS is wrong.
Correct the entry so that the full MAINTAINER list is returned.
Repair the file entry in COMPUTE EXPRESS LINK (CXL).
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@redhat.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Link: https://lore.kernel.org/r/20240411062443.47372-1-lukas.bulwahn@redhat.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
As described in the added code comment, a reference to .exit.text is ok
for drivers registered via module_platform_driver_probe(). Make this
explicit to prevent the following section mismatch warning
WARNING: modpost: drivers/input/mouse/amimouse: section mismatch in reference: amimouse_driver+0x8 (section: .data) -> amimouse_remove (section: .exit.text)
that triggers on an allmodconfig W=1 build.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/2e3783106bf6bd9a7bdeb12b706378fb16316471.1711748999.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Enable ufs & ufs phy nodes for Oriole. Also define the ufs regulator node.
ufs regulator is a stub until full s2mpg11 slave pmic support is added.
The gpio defined is for the BOOTLD0 (gs101) signal connected to
UFS_EN(s2mpg11) gpio enabled voltage rail for UFS.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20240430141445.2688499-4-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Add the ufs controller node and phy node for gs101.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20240430141445.2688499-3-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This has some configuration bits such as sharability that
are required by UFS.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: André Draszik <andre.draszik@linaro.org>
Link: https://lore.kernel.org/r/20240430141445.2688499-2-peter.griffin@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Use REG_BIT() & co. for the vlv/chv DPIO PHY registers.
Note that DPIO_BIAS_CURRENT_CTL_SHIFT was incorrectly defined
to be 21 wheres 20 is the correct value. It is not used in the
code though so didn't bother splitting to a separate patch.
v2: drop stray tabs (Jani)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-14-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Drop the leading underscore from the CHV PHY common lane
register definitions. We use these directly from actual
code so the underscore here is misleading as usually it indicates
an intermediate define that shouldn't be used directly.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-12-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
In the encoder hooks we are dealing primarily with the encoder,
so derive the DPIO PHY from the encoder rather than the pipe.
Technically this doesn't matter as we can't cross connect
pipes<->port across PHY boundaries, but it does conveny the
intention more accurately.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-10-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Stop using 'pipe' directly as the DPIO PHY channel. This
does happen to work on VLV since it just has the one PHY
with CH0==pipe A and CH1==pipe B. But explicitly converting
the thing to the right enum makes the whole thing less
confusing.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
The spreadsheet defines the PLL register block as having
the dwords in the following order:
block dwords offsets
PLL1 0x0-0x7 0x00-0x1f
PLL2 0x0-0x7 0x20-0x3f
PLL1ext 0x10-0x1f 0x40-0x5f
PLL2ext 0x10-0x1f 0x60-0x7f
So dword indexes 0x8-0xf don't even exist. Renumber
our register defines to match.
Note that the spreadsheet used hex numbering whereas our
defiens are in decimal. Perhaps we should change that?
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
VLV_PLL_DW9_BCAST is actually VLV_PCS_DW17_BCAST. The address
does kinda look like it goes to the PLL block on a first glance,
but broadcast is special and doesn't even exist for the PLL
(only PCS and TX have it).
The fact that we use a broadcast write here is a bit sketchy
IMO since we're now blasting the register to all PCS splines
across the whole PHY. So the PCS registers in the other channel
(ie. other pipe/port) will also be written. But I guess the
fact that we always write the same value should make this a nop
even if the other channel is already enabled (assuming the VBIOS/GOP
didn't screw up and use some other value...).
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422083457.23815-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
- Fix + test for a NULL dereference resulting from unsanitised user
input in the vgic-v2 device attribute accessors
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZilbBhccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFoIDAQDd28yg55iX18Ad/3zfAMdWgdNz
NPeicTshy6xeADWTuAEAvRF7KBaC5YQQI8NeWSVd0AYJ63DkF9pzXR9dgY0iQgE=
=VHCP
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.9, part #2
- Fix + test for a NULL dereference resulting from unsanitised user
input in the vgic-v2 device attribute accessors
Stanislav Fomichev says:
====================
Syzkaller found a case where it's possible to attach cgroup_skb program
to the sockopt hooks. Apparently it's currently possible to do that,
but only when using BPF_LINK_CREATE API. The first patch in the series
has more info on why that happens.
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
typec_register_partner() does not guarantee partner registration
to always succeed. In the event of failure, port->partner is set
to the error value or NULL. Given that port->partner validity is
not checked, this results in the following crash:
Unable to handle kernel NULL pointer dereference at virtual address xx
pc : run_state_machine+0x1bc8/0x1c08
lr : run_state_machine+0x1b90/0x1c08
..
Call trace:
run_state_machine+0x1bc8/0x1c08
tcpm_state_machine_work+0x94/0xe4
kthread_worker_fn+0x118/0x328
kthread+0x1d0/0x23c
ret_from_fork+0x10/0x20
To prevent the crash, check for port->partner validity before
derefencing it in all the call sites.
Cc: stable@vger.kernel.org
Fixes: c97cd0b4b5 ("usb: typec: tcpm: set initial svdm version based on pd revision")
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240427202812.3435268-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The linux/cxl-event.h header file uses the u8, u16, and uuid_t types,
but it doesn't include the necessary header files,
<linux/types.h> and <linux/uuid.h>.
Currently, cxl-event.h is only used by drivers/cxl/cxlmem.h,
and it doesn't cause any errors because cxlmem.h indirectly
includes the required types.
However, cxl-event.h may be used by other CXL-related code in the future,
so it's important to fix this issue by including the missing header files
directly in cxl-event.h.
Signed-off-by: Sangyun Kim <sangyun.kim@snu.ac.kr>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://lore.kernel.org/r/20240417035043.2791431-1-sangyun.kim@snu.ac.kr
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Before sending Enter Mode for an Alt Mode, there is a gap between Discover
Modes and the Alt Mode driver queueing the Enter Mode VDM for the port
partner to send a message to the port.
If this message results in unregistering Alt Modes such as in a DR_SWAP,
then the following deadlock can occur with respect to the DisplayPort Alt
Mode driver:
1. The DR_SWAP state holds port->lock. Unregistering the Alt Mode driver
results in a cancel_work_sync() that waits for the current dp_altmode_work
to finish.
2. dp_altmode_work makes a call to tcpm_altmode_enter. The deadlock occurs
because tcpm_queue_vdm_unlock attempts to hold port->lock.
Before attempting to grab the lock, ensure that the port is in a state
vdm_run_state_machine can run in. Alt Mode unregistration will not occur
in these states.
Fixes: 03eafcfb60 ("usb: typec: tcpm: Add tcpm_queue_vdm_unlocked() helper")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240423202356.3372314-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When a Fast Role Swap control message attempt results in a transition
to ERROR_RECOVERY, the TCPC can still queue a TCPM_SOURCING_VBUS event.
If the event is queued but processed after the tcpm_reset_port() call
in the PORT_RESET state, then the following occurs:
1. tcpm_reset_port() calls tcpm_init_vbus() to reset the vbus sourcing and
sinking state
2. tcpm_pd_event_handler() turns VBUS on before the port is in the default
state.
3. The port resolves as a sink. In the SNK_DISCOVERY state,
tcpm_set_charge() cannot set vbus to charge.
Clear pd events within PORT_RESET to get rid of non-applicable events.
Fixes: b17dd57118 ("staging: typec: tcpm: Improve role swap with non PD capable partners")
Cc: stable@vger.kernel.org
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240423202715.3375827-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The decoder enum has a name conversion function defined now.
Use that instead of open coding.
Suggested-by: Navneet Singh <navneet.singh@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230604-dcd-type2-upstream-v2-1-f740c47e7916@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The CXL driver uses both functions phys_to_target_node() and
memory_add_physaddr_to_nid(). The x86 architecture relies on the
NUMA_KEEP_MEMINFO kernel option enabled for both functions to work
correct. Update Kconfig to make sure the option is always enabled for
the driver.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Link: http://lore.kernel.org/r/65f8b191c0422_aa222941b@dwillia2-mobl3.amr.corp.intel.com.notmuch
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Link: https://lore.kernel.org/r/20240424154756.2152614-1-rrichter@amd.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
A mixed mode decoder is programmed with device physical addresses
that span both ram and pmem partitions of a memdev.
Linux does not support mixed mode decoders. The driver rejects
sysfs writes that try to set decoder mode to mixed, and if a
resource bieng allocated is not wholly contained in either the
pmem or ram partition of a memdev, it is also rejected. Basically,
the CXL region driver is not going to create regions with mixed
mode decoders, but the BIOS could.
If the kernel driver sees the mixed mode decoder, it will fail to
enable the region, and emit a dev_dbg() message.
A dev_dbg() is not noisy enough in this case. Change the message
to be a dev_warn() that explicitly says mixed mode is not supported.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20230218013834.31237-1-alison.schofield@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
