Extend the first paragraph to mention the {,num_}dapm_routes fields just
like the widget conterparts. Mention the route fields also in the code
example. Fix "at build time", this really means "at probe time".
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-9-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The small paragraph describing how to register widgets is incomplete (does
not mention routes) and mentions snd_soc_dapm_new_control() which is not
really used. Moreover it appears as a part of the "Virtual Widgets"
subsection.
Replace it with a detailed and current description of how widgets and
routes are registered, mentioning both static declaration and runtime
registration. Also make this a section on its own.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-8-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Extend the initial description providing clearer definitions of "widget"
and "route", and to stop using the word "component" to mean "widget". Give
more details and clarify wording and add a picture representing a real DAPM
graph.
Group all the introductory paragraphs before the "DAPM power domains", and
split the latter to a specific section.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-7-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DAPM is actually based on a graph, so use this specific term instead of the
more generic "map".
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-6-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is no need for a dash after colons. Also fix an incorrect ":-::"
sequence.
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://lore.kernel.org/r/20240426-dapm-docs-v2-4-87b07547eb5b@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For rt5682s codec, we could use bclk as PLL source when the frequency
is 3.072MHz but no 2.4MHz. Update the code to select correct pll_id
and clk_id for 3.072MHz bclk.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-24-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A different bclk frequency 3.072MHz was introduced to tgl platform and
is used in mtl topologies. Use SOF API to get frequency from topology
instead of hardcoding.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-23-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The variable 'pll_id' is needed only when we use snd_soc_dai_set_pll()
to setup PLL. Move the code segment to improve some readability.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-22-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move default BYT/CHT quirk to driver_data of sof_rt5682 board. This
fixes a problem that DMI quirk of Minnowboard board got overwritten in
probe function since it's a BYT board.
Fixes: c68e07970e ("ASoC: intel: sof_rt5682: Add quirk for number of HDMI DAI's")
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-21-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config icl_rt5682_def to rt5682 machine driver for all
icl boards using default SSP port allocation (headphone codec on SSP0).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-20-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't need this quirk flag since 'is_legacy_cpu' will be true if
this is a BYT/CHT board.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a variable mclk_en to sof_rt5682_private structure to reduce
global variable access. No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Delete this driver and use sof_rt5682 machine driver instead.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For glk boards, MAX98357A speaker amplifier is supported by machine
driver glk_rt5682_mx98357a with sound card name glkrt5682max. Use same
name for backward compatibility with existing devices on market.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config glk_rt5682_def to rt5682 machine driver for all
glk boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove glk platform support and use sof_da7219 machine driver instead
for existing glk boards with MAX98357A speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For glk boards, MAX98357A speaker amplifier is supported by machine
driver bxt_da7219_max98357a with sound card name glkda7219max. Use
same name for backward compatibility with existing devices on market.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config glk_da7219_def to da7219 machine driver for all
glk boards using default SSP port allocation (headphone codec on SSP2,
speaker amplifiers on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove cml platform support and use sof_da7219 machine driver instead
for existing cml boards with MAX98357A speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For cml boards, MAX98357A speaker amplifier is supported by machine
driver bxt_da7219_max98357a with sound card name cmlda7219max. Use
same name for backward compatibility with existing devices on market.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to Maxim MAX98357A speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Remove MAX98390 support and use sof_da7219 machine driver instead for
existing cml boards with MAX98390 speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For cml boards, MAX98390 speaker amplifier is supported by machine
driver bxt_da7219_max98357a with sound card name cml_max98390_da7219.
Use same name for backward compatibility with existing devices on
market.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the board config cml_da7219_def to da7219 machine driver for all
cml boards using default SSP port allocation (headphone codec on SSP0,
speaker amplifiers on SSP1).
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support to Maxim MAX98390 speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for 2xMAX98390 speaker amplifier running in I2S mode for
existing cml boards.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Two machine drivers sof_rt5682 and sof_nau8825 always register two
speaker widgets 'Left Spk' and 'Right Spk' regardless the actual
number of speakers. Move the widget registration to speaker common
modules to avoid useless speaker widgets for 1 or 4 speaker boards.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152529.38345-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid leaked references.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426152939.38471-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The documentation for device_get_named_child_node() mentions this
important point:
"
The caller is responsible for calling fwnode_handle_put() on the
returned fwnode pointer.
"
Add fwnode_handle_put() to avoid a leaked reference.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240426153033.38500-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Amlogic sound cards do create a lot of pcm interfaces, possibly more than
8. Some pcm interfaces are internal (like DPCM backends and c2c) and not
exposed to userspace.
Those interfaces still increase the number passed to snd_find_free_minor(),
which eventually exceeds 8 causing -EBUSY error on card registration if
CONFIG_SND_DYNAMIC_MINORS=n and the interface is exposed to userspace.
select CONFIG_SND_DYNAMIC_MINORS for Amlogic cards to avoid the problem.
Fixes: 7864a79f37 ("ASoC: meson: add axg sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426134150.3053741-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
So far, the formatters have been reset/enabled using the .prepare()
callback. This was done in this callback because walking the formatters use
a mutex. A mutex is used because formatter handling require dealing
possibly slow clock operation.
With the support of non-atomic, .trigger() callback may be used which also
allows to properly enable and disable formatters on start but also
pause/resume.
This solve a random shift on TDMIN as well repeated samples on for TDMOUT.
Fixes: d60e4f1e4b ("ASoC: meson: add tdm interface driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-4-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Non atomic operations need to be performed in the trigger callback
of the TDM interfaces. Those are BEs but what matters is the nonatomic
flag of the FE in the DPCM context. Just set nonatomic for everything so,
at least, what is done is clear.
Fixes: 7864a79f37 ("ASoC: meson: add axg sound card support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-3-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the AXG audio subsystem, there is a possible random channel shift on
TDM capture, when the slot number per lane is more than 2, and there is
more than one lane used.
The problem has been there since the introduction of the axg audio support
but such scenario is pretty uncommon. This is why there is no loud
complains about the problem.
Solving the problem require to make the links non-atomic and use the
trigger() callback to start FEs and BEs in the appropriate order.
This was tried in the past and reverted because it caused the block irq to
sleep while atomic. However, instead of reverting, the solution is to call
snd_pcm_period_elapsed() in a non atomic context.
Use the bottom half of a threaded IRQ to do so.
Fixes: 6dc4fa179f ("ASoC: meson: add axg fifo base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20240426152946.3078805-2-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The via-macii ADB driver calls request_irq() after disabling hard
interrupts. But disabling interrupts isn't necessary here because the
VIA shift register interrupt was masked during VIA1 initialization.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/419fcc09d0e563b425c419053d02236b044d86b0.1710298421.git.fthain@linux-m68k.org
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
We can use the DEFINE_RES_MEM_NAMED() macro and resource_contains()
helper instead of reimplementing them in the code. No functional change
intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20230831121623.36293-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Support for Sony Xperia 1V, on the SM8550 platform, is added.
On IPQ8074, UART6 is described and unused gpios from QPIC are removed.
Backlight and touchscreen are described on Samsung Grand Prime devices.
RGB LED is added to Sony Xperia "Yoshino" devices, on which the
volume-up key definition is corrected as well.
Light Pulse Generator node is added to PM6150L PMIC, and blocks related
to USB Type-C on PM6150 are added.
On QCS6490 Rb3Gen2 UFS storage, USB Type-C management, a couple of
remoteprocs and both USB Type-C and native DisplayPort are enabled.
For the related IDP display is enabled, and the PMIC volume and power
buttons are described.
The inline crypto engine is added for SC7280, and an additional turbo
frequency is added to the MDP.
USB Type-C port management is introduce for the QRB2210 RB1. WiFi
firmware-name qualifier is added to both RB1 and RB2 boards.
The LMH node is added for the QCM2290, to configure the thresholds as
well as provide thermal pressure input.
The regulator range is adjusted for SD-card IO on SA8155P ADP, to allow
UHS modes.
The unused DCC is disabled on SC7180, and unused PMIC gpio block is
disabled on Trogdor.
For Lenovo Flex 5G, on SC8180X, the GPU firmware path is aligned with
agreed upon firmware structure. The frequency of the I2C bus for
touchpad is brought up to mitigate missing events. A number of
additional cleanups are introduced.
For SC8280XP GICv3 ITS is wired up for PCIe. EAS properties ad
introduced. A PS_HOLD-based restart node is introduced and acts as a
fallback if other mechanisms are unavailable to restart the board.
QFPROM is described, missing LMH interrupts for thermal pressure are
added. The TCSR download mode register is added, to allow configuring
if download mode should be entered on a crash.
USB Type-C handling is introduce for Fairphone FP3 as well.
On SM6350 crypto engine and DisplayPort controllers are introduced.
WiFi is enabled on the SM8150 Hardware Development Kit (HDK)
USB PD properties are added on Xiaomi Mi Pad 5 Pro devices.
Interconnect paths are added for UFS on SM8350, to ensure the bus is
voted for when the controller is operating.
On SM8550 the DMA coherency properties are corrected for SMMU and a few
consumers. Missing DWC3 quirks are added and the SNPS PHY parameters are
adjusted. Fastrpc banks are marked non-secure as needed.
The GPU description is introduced on SM8650, and enabled on the QRD. A
missing reserved-memory node is added, as is a few missing fastrpc
compute banks, and the non-secure-domain flag for other banks.
On X1 Elite SPMI support is added, together with PMIC definitons. The
link properties for DP3 are corrected, and audio-related resets are
introduced. SoundWire properties are corrected.
Nodes describing the PCIe bridge under the host controller is added
for a bunch of platforms.
The GPIO carrying orientation information for USB Type-C is added across
Fairphone 5, Lenovo Flex 5G, Lenovo Thinkpad X13s, SM8350 and SM845
HDKs.
A few dtbTool-specific compatibles for msm8916 is dropped from the
bindings.
A number of DeviceTree binding validation issues are corrected.
-----BEGIN PGP SIGNATURE-----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=j685
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=f9Mf
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.10
Support for Sony Xperia 1V, on the SM8550 platform, is added.
On IPQ8074, UART6 is described and unused gpios from QPIC are removed.
Backlight and touchscreen are described on Samsung Grand Prime devices.
RGB LED is added to Sony Xperia "Yoshino" devices, on which the
volume-up key definition is corrected as well.
Light Pulse Generator node is added to PM6150L PMIC, and blocks related
to USB Type-C on PM6150 are added.
On QCS6490 Rb3Gen2 UFS storage, USB Type-C management, a couple of
remoteprocs and both USB Type-C and native DisplayPort are enabled.
For the related IDP display is enabled, and the PMIC volume and power
buttons are described.
The inline crypto engine is added for SC7280, and an additional turbo
frequency is added to the MDP.
USB Type-C port management is introduce for the QRB2210 RB1. WiFi
firmware-name qualifier is added to both RB1 and RB2 boards.
The LMH node is added for the QCM2290, to configure the thresholds as
well as provide thermal pressure input.
The regulator range is adjusted for SD-card IO on SA8155P ADP, to allow
UHS modes.
The unused DCC is disabled on SC7180, and unused PMIC gpio block is
disabled on Trogdor.
For Lenovo Flex 5G, on SC8180X, the GPU firmware path is aligned with
agreed upon firmware structure. The frequency of the I2C bus for
touchpad is brought up to mitigate missing events. A number of
additional cleanups are introduced.
For SC8280XP GICv3 ITS is wired up for PCIe. EAS properties ad
introduced. A PS_HOLD-based restart node is introduced and acts as a
fallback if other mechanisms are unavailable to restart the board.
QFPROM is described, missing LMH interrupts for thermal pressure are
added. The TCSR download mode register is added, to allow configuring
if download mode should be entered on a crash.
USB Type-C handling is introduce for Fairphone FP3 as well.
On SM6350 crypto engine and DisplayPort controllers are introduced.
WiFi is enabled on the SM8150 Hardware Development Kit (HDK)
USB PD properties are added on Xiaomi Mi Pad 5 Pro devices.
Interconnect paths are added for UFS on SM8350, to ensure the bus is
voted for when the controller is operating.
On SM8550 the DMA coherency properties are corrected for SMMU and a few
consumers. Missing DWC3 quirks are added and the SNPS PHY parameters are
adjusted. Fastrpc banks are marked non-secure as needed.
The GPU description is introduced on SM8650, and enabled on the QRD. A
missing reserved-memory node is added, as is a few missing fastrpc
compute banks, and the non-secure-domain flag for other banks.
On X1 Elite SPMI support is added, together with PMIC definitons. The
link properties for DP3 are corrected, and audio-related resets are
introduced. SoundWire properties are corrected.
Nodes describing the PCIe bridge under the host controller is added
for a bunch of platforms.
The GPIO carrying orientation information for USB Type-C is added across
Fairphone 5, Lenovo Flex 5G, Lenovo Thinkpad X13s, SM8350 and SM845
HDKs.
A few dtbTool-specific compatibles for msm8916 is dropped from the
bindings.
A number of DeviceTree binding validation issues are corrected.
* tag 'qcom-arm64-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (110 commits)
dt-bindings: arm: qcom: Add Samsung Galaxy S5 China (kltechn)
arm64: dts: qcom: qrb4210-rb1: add firmware-name qualifier to WiFi node
arm64: dts: qcom: qrb2210-rb1: add firmware-name qualifier to WiFi node
arm64: dts: qcom: ipq6018: Add PCIe bridge node
arm64: dts: qcom: ipq8074: Add PCIe bridge node
arm64: dts: qcom: msm8996: Add PCIe bridge node
arm64: dts: qcom: sc8180x: Add PCIe bridge node
arm64: dts: qcom: qcs404: Add PCIe bridge node
arm64: dts: qcom: sc7280: Add PCIe bridge node
arm64: dts: qcom: msm8998: Add PCIe bridge node
arm64: dts: qcom: sc8280xp: Add PCIe bridge node
arm64: dts: qcom: sa8775p: Add PCIe bridge node
arm64: dts: qcom: sm8650: Add PCIe bridge node
arm64: dts: qcom: sm8550: Add PCIe bridge node
arm64: dts: qcom: sm8450: Add PCIe bridge node
arm64: dts: qcom: sm8350: Add PCIe bridge node
arm64: dts: qcom: sm8150: Add PCIe bridge node
arm64: dts: qcom: sdm845: Add PCIe bridge node
arm64: dts: qcom: sm8250: Add PCIe bridge node
arm64: dts: qcom: sdm845-db845c: make pcie0_3p3v_dual always-on
...
Link: https://lore.kernel.org/r/20240427175951.1439887-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The QCA8074 PHY package found in IPQ4019 is properly described.
The Sony Xperia Z2 Tablet is cleaned up and improved, vibrator support
is added, upon support for Sony Xperia Z3 is added.
Also based on MSM8974, support for Samsung Galaxy S5 China is introduced.
The WiFi board type is added for these "klte" Samsung devices, to select
appropriate NVRAM firmware file.
Based on MSM8226, support for Motorola Moto G (2013) is added.
Nodes representing the PCIe bridges under existing controllers are added
for APQ8064, IPQ4019, IPQ8064, and SDX55.
A number of fixes throughout to improve compliance with DeviceTree
bindings.
-----BEGIN PGP SIGNATURE-----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=qXDI
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=ejIZ
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm32-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm32 DeviceTree updates for v6.10
The QCA8074 PHY package found in IPQ4019 is properly described.
The Sony Xperia Z2 Tablet is cleaned up and improved, vibrator support
is added, upon support for Sony Xperia Z3 is added.
Also based on MSM8974, support for Samsung Galaxy S5 China is introduced.
The WiFi board type is added for these "klte" Samsung devices, to select
appropriate NVRAM firmware file.
Based on MSM8226, support for Motorola Moto G (2013) is added.
Nodes representing the PCIe bridges under existing controllers are added
for APQ8064, IPQ4019, IPQ8064, and SDX55.
A number of fixes throughout to improve compliance with DeviceTree
bindings.
* tag 'qcom-arm32-for-6.10' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (22 commits)
ARM: dts: qcom: msm8974: Add DTS for Samsung Galaxy S5 China (kltechn)
ARM: dts: qcom: msm8974-klte-common: Pin WiFi board type
ARM: dts: qcom: msm8974: Split out common part of samsung-klte
ARM: dts: qcom: sdx55: Add PCIe bridge node
ARM: dts: qcom: apq8064: Add PCIe bridge node
ARM: dts: qcom: ipq4019: Add PCIe bridge node
ARM: dts: qcom: ipq8064: Add PCIe bridge node
ARM: dts: qcom: msm8974-sony-shinano: Enable vibrator
ARM: dts: qcom: ipq4019: add QCA8075 PHY Package nodes
ARM: dts: qcom: Add support for Motorola Moto G (2013)
dt-bindings: arm: qcom: Add Motorola Moto G (2013)
ARM: dts: qcom: msm8974: Add empty chosen node
ARM: dts: qcom: msm8974: Add @0 to memory node name
ARM: dts: qcom: Add Sony Xperia Z3 smartphone
ARM: dts: qcom: msm8974-sony-castor: Split into shinano-common
ARM: dts: qcom: msm8916: idle-state compatible require the generic idle-state
ARM: dts: qcom: include cpu in idle-state node names
ARM: dts: qcom: msm8974pro-castor: Rename wifi node name
ARM: dts: qcom: msm8974pro-castor: Add debounce-interval for keys
ARM: dts: qcom: msm8974pro-castor: Remove camera button definitions
...
Link: https://lore.kernel.org/r/20240427163625.1432458-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Adds the Security Engine devices found on Tegra234 and fixes RTC aliases
by referencing them by label rather than path so that errors can be
detected more easily.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAmYr510ACgkQ3SOs138+
s6GTCxAArVX27tDZoDRKuz4RYD2PYsZGynlRLOMuqgEASUEO6Caoy9S4U255Z1CC
Z/jFGB9EKmCzOnwxbnYFRO3aNO0ITlnYTddr3GIjpsSQ65pJsvzm4MWnJO50IZIw
QW5+jMvWHhRWGASwK/vdFm+Ii2COZgSowZl6QFZr3smebroDJHm4+GYZk5gmk76d
QrK1MhtRLF05gRD+eVWt0p3JWPVMQ0d25hvCcWcCHrPVqaH+edUmpfh4qpIrKCvn
bZGPYjuTPlW1YZq5FPc8ifINY/DpObz+yIvN4QtfDmmCwNtZp6HFtB7i1DVa+07q
Ji3nd0+AhJnCWklTy5vgts4YHeyQWz8k/1U1rx+4bHxIXSwiXPZmFRxN86lkZ2dF
aebAL/yWRse2KeRQZxaA2rkzZu4Ym7U5mvb0AOrrwV0Yhrnzswt3gWk5i2V3kZdm
oZZEO5Kq9jgT8TJ5W7D8ZhK5HhRTkGpFIAdzN3euQuZzU39S73XSLIMRFWAXdMzc
Jn9m14tw87KPNXrHBLugmFr0ed4DnvAGbdOezORNgQhceyD2YTrHkfmXw54KmWjk
h8PPvulVEILsgx+RyNjub/vxUnI8lIfkas3XazWY/GCLwgj9QlexAPi8XC00RsbI
tV31jWk59A3jpwZYcXfxr9iMAWJH0uprPkJQ8RdHFkIHj0HltLc=
=Lfbf
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=BoMz
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Changes for v6.10-rc1
Adds the Security Engine devices found on Tegra234 and fixes RTC aliases
by referencing them by label rather than path so that errors can be
detected more easily.
* tag 'tegra-for-6.10-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add Tegra Security Engine DT nodes
arm64: tegra: Correct Tegra132 I2C alias
Link: https://lore.kernel.org/r/20240426180519.3972626-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Included is one change that adds the dma-coherent flag to the device
tree json-schema for host1x on Tegra194 and Tegra234.
-----BEGIN PGP SIGNATURE-----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=jXQu
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=lDsr
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-6.10-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
dt-bindings: Changes for v6.10-rc1
Included is one change that adds the dma-coherent flag to the device
tree json-schema for host1x on Tegra194 and Tegra234.
* tag 'tegra-for-6.10-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: display: tegra: Allow dma-coherent on Tegra194 and later
Link: https://lore.kernel.org/r/20240426180519.3972626-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Use the subreq_counter in netfs_io_request to allocate subrequest
debug_index values in read ops as well as write ops.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Make the netfs_io_request::subreq_counter, used to generate values for
netfs_io_subrequest::debug_index, into an atomic_t so that it can be called
from the retry thread at the same time as the app thread issuing writes.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Remove the deprecated use of PG_private_2 in netfslib.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Matthew Wilcox (Oracle) <willy@infradead.org>
cc: linux-cachefs@redhat.com
cc: linux-fsdevel@vger.kernel.org
cc: linux-mm@kvack.org
