Historically, checking the tree-ness of the directory tree structure has
not been complete. Cycles of subdirectories break the tree properties,
as do subdirectories with multiple parents. It's easy enough for DFS to
detect problems as long as one of the participants is reachable from the
root, but this technique cannot find unconnected cycles.
Directory parent pointers change that, because we can discover all of
these problems from a simple walk from a subdirectory towards the root.
For each child we start with, if the walk terminates without reaching
the root, we know the path is disconnected and ought to be attached to
the lost and found. If we find ourselves, we know this is a cycle and
can delete an incoming edge. If we find multiple paths to the root, we
know to delete an incoming edge.
Even better, once we've finished walking paths, we've identified the
good ones and know which other path(s) to remove.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZih1NwAKCRBKO3ySh0YR
pg8TAQD/usg8IEtpiHxiewnJPWrxnM5X3e4fmuHRz41pvCntnwD+Oa28Oa9Fmogf
Y5AwmdLpy3qugvnHdxhQx4nGKiz8FAA=
=wJgH
-----END PGP SIGNATURE-----
Merge tag 'scrub-directory-tree-6.10_2024-04-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeC
xfs: detect and correct directory tree problems
Historically, checking the tree-ness of the directory tree structure has
not been complete. Cycles of subdirectories break the tree properties,
as do subdirectories with multiple parents. It's easy enough for DFS to
detect problems as long as one of the participants is reachable from the
root, but this technique cannot find unconnected cycles.
Directory parent pointers change that, because we can discover all of
these problems from a simple walk from a subdirectory towards the root.
For each child we start with, if the walk terminates without reaching
the root, we know the path is disconnected and ought to be attached to
the lost and found. If we find ourselves, we know this is a cycle and
can delete an incoming edge. If we find multiple paths to the root, we
know to delete an incoming edge.
Even better, once we've finished walking paths, we've identified the
good ones and know which other path(s) to remove.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'scrub-directory-tree-6.10_2024-04-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: fix corruptions in the directory tree
xfs: report directory tree corruption in the health information
xfs: invalidate dirloop scrub path data when concurrent updates happen
xfs: teach online scrub to find directory tree structure problems
This series implements online repair for directory parent pointer
metadata. The checking half is fairly straightforward -- for each
outgoing directory link (forward or backwards), grab the inode at the
other end, and confirm that there's a corresponding link. If we can't
grab an inode or lock it, we'll save that link for a slower loop that
cycles all the locks, confirms the continued existence of the link, and
rechecks the link if it's actually still there.
Repairs are a bit more involved -- for directories, we walk the entire
filesystem to rebuild the dirents from parent pointer information.
Parent pointer repairs do the same walk but rebuild the pptrs from the
dirent information, but with the added twist that it duplicates all the
xattrs so that it can use the atomic extent swapping code to commit the
repairs atomically.
This introduces an added twist to the xattr repair code -- we use dirent
hooks to detect a colliding update to the pptr data while we're not
holding the ILOCKs; if one is detected, we restart the xattr salvaging
process but this time hold all the ILOCKs until the end of the scan.
For offline repair, the phase6 directory connectivity scan generates an
index of all the expected parent pointers in the filesystem. Then it
walks each file and compares the parent pointers attached to that file
against the index generated, and resyncs the results as necessary.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZih1NgAKCRBKO3ySh0YR
pi/tAQCAMBb+xkfs+RR/qmCwCcoyw2rQwEPKOPqhLxfYdlqc5AEAsa64aKliv5vf
Z6ShYoEpK4SuwclOqf9qFafN4D6zKg4=
=SurM
-----END PGP SIGNATURE-----
Merge tag 'repair-pptrs-6.10_2024-04-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeC
xfs: online repair for parent pointers
This series implements online repair for directory parent pointer
metadata. The checking half is fairly straightforward -- for each
outgoing directory link (forward or backwards), grab the inode at the
other end, and confirm that there's a corresponding link. If we can't
grab an inode or lock it, we'll save that link for a slower loop that
cycles all the locks, confirms the continued existence of the link, and
rechecks the link if it's actually still there.
Repairs are a bit more involved -- for directories, we walk the entire
filesystem to rebuild the dirents from parent pointer information.
Parent pointer repairs do the same walk but rebuild the pptrs from the
dirent information, but with the added twist that it duplicates all the
xattrs so that it can use the atomic extent swapping code to commit the
repairs atomically.
This introduces an added twist to the xattr repair code -- we use dirent
hooks to detect a colliding update to the pptr data while we're not
holding the ILOCKs; if one is detected, we restart the xattr salvaging
process but this time hold all the ILOCKs until the end of the scan.
For offline repair, the phase6 directory connectivity scan generates an
index of all the expected parent pointers in the filesystem. Then it
walks each file and compares the parent pointers attached to that file
against the index generated, and resyncs the results as necessary.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-pptrs-6.10_2024-04-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: inode repair should ensure there's an attr fork to store parent pointers
xfs: repair link count of nondirectories after rebuilding parent pointers
xfs: adapt the orphanage code to handle parent pointers
xfs: actually rebuild the parent pointer xattrs
xfs: add a per-leaf block callback to xchk_xattr_walk
xfs: split xfs_bmap_add_attrfork into two pieces
xfs: remove pointless unlocked assertion
xfs: implement live updates for parent pointer repairs
xfs: repair directory parent pointers by scanning for dirents
xfs: replay unlocked parent pointer updates that accrue during xattr repair
xfs: implement live updates for directory repairs
xfs: repair directories by scanning directory parent pointers
xfs: add raw parent pointer apis to support repair
xfs: salvage parent pointers when rebuilding xattr structures
xfs: make the reserved block permission flag explicit in xfs_attr_set
xfs: remove some boilerplate from xfs_attr_set
Teach online fsck to use parent pointers to assist in checking
directories, parent pointers, extended attributes, and link counts.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZih1NgAKCRBKO3ySh0YR
pkk7AQDd/xKCVQDq14c1A9MjzhpTUn9dWeHoU6KUV1xWvtDaygD6A1KBzirREi9O
ieKg3OGPcg41sl4bnz7lsvRGxgp/mgY=
=XU5l
-----END PGP SIGNATURE-----
Merge tag 'scrub-pptrs-6.10_2024-04-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeC
xfs: scrubbing for parent pointers
Teach online fsck to use parent pointers to assist in checking
directories, parent pointers, extended attributes, and link counts.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'scrub-pptrs-6.10_2024-04-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: check parent pointer xattrs when scrubbing
xfs: walk directory parent pointers to determine backref count
xfs: deferred scrub of parent pointers
xfs: scrub parent pointers
xfs: deferred scrub of dirents
xfs: check dirents have parent pointers
xfs: revert commit 44af6c7e59
This is the latest parent pointer attributes for xfs. The goal of this
patch set is to add a parent pointer attribute to each inode. The
attribute name containing the parent inode, generation, and directory
offset, while the attribute value contains the file name. This feature
will enable future optimizations for online scrub, shrink, nfs handles,
verity, or any other feature that could make use of quickly deriving an
inodes path from the mount point.
Directory parent pointers are stored as namespaced extended attributes
of a file. Because parent pointers are an indivisible tuple of
(dirent_name, parent_ino, parent_gen) we cannot use the usual attr name
lookup functions to find a parent pointer. This is solvable by
introducing a new lookup mode that checks both the name and the value of
the xattr.
Therefore, introduce this new name-value lookup mode that's gated on the
XFS_ATTR_PARENT namespace. This requires the introduction of new
opcodes for the extended attribute update log intent items, which
actually means that parent pointers (itself an INCOMPAT feature) does
not depend on the LOGGED_XATTRS log incompat feature bit.
To reduce collisions on the dirent names of parent pointers, introduce a
new attr hash mode that is the dir2 namehash of the dirent name xor'd
with the parent inode number.
At this point, Allison has moved on to other things, so I've merged her
patchset into djwong-dev for merging.
Updates since v12 [djwong]:
Rebase on 6.9-rc and update the online fsck design document.
Redesign the ondisk format to use the name-value lookups to get us back
to the point where the attr is (dirent_name -> parent_ino/gen).
Updates since v11 [djwong]:
Rebase on 6.4-rc and make some tweaks and bugfixes to enable the repair
prototypes. Merge with djwong-dev and make online repair actually work.
Updates since v10 [djwong]:
Merge in the ondisk format changes to get rid of the diroffset conflicts
with the parent pointer repair code, rebase the entire series with the
attr vlookup changes first, and merge all the other random fixes.
Updates since v9:
Reordered patches 2 and 3 to be 6 and 7
xfs: Add xfs_verify_pptr
moved parent pointer validators to xfs_parent
xfs: Add parent pointer ioctl
Extra validation checks for fs id
added missing release for the inode
use GFP_KERNEL flags for malloc/realloc
reworked ioctl to use pptr listenty and flex array
NEW
xfs: don't remove the attr fork when parent pointers are enabled
NEW
directory lookups should return diroffsets too
NEW
xfs: move/add parent pointer validators to xfs_parent
Updates since v8:
xfs: parent pointer attribute creation
Fix xfs_parent_init to release log assist on alloc fail
Add slab cache for xfs_parent_defer
Fix xfs_create to release after unlock
Add xfs_parent_start and xfs_parent_finish wrappers
removed unused xfs_parent_name_irec and xfs_init_parent_name_irec
xfs: add parent attributes to link
Start/finish wrapper updates
Fix xfs_link to disallow reservationless quotas
xfs: add parent attributes to symlink
Fix xfs_symlink to release after unlock
Start/finish wrapper updates
xfs: remove parent pointers in unlink
Start/finish wrapper updates
Add missing parent free
xfs: Add parent pointers to rename
Start/finish wrapper updates
Fix rename to only grab logged xattr once
Fix xfs_rename to disallow reservationless quotas
Fix double unlock on dqattach fail
Move parent frees to out_release_wip
xfs: Add parent pointers to xfs_cross_rename
Hoist parent pointers into rename
Questions comments and feedback appreciated!
Thanks all!
Allison
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZih1NgAKCRBKO3ySh0YR
pj2UAQDJwGaKslDfXmMY0JMS/GTrEwD7IFNQ/cE2fIkfoUNDeAEAs1tPS0lST4MM
YUC+1DVSkIl+07sV9Xf0q4zMvgJtOQc=
=oOSQ
-----END PGP SIGNATURE-----
Merge tag 'pptrs-6.10_2024-04-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeC
xfs: Parent Pointers
This is the latest parent pointer attributes for xfs. The goal of this
patch set is to add a parent pointer attribute to each inode. The
attribute name containing the parent inode, generation, and directory
offset, while the attribute value contains the file name. This feature
will enable future optimizations for online scrub, shrink, nfs handles,
verity, or any other feature that could make use of quickly deriving an
inodes path from the mount point.
Directory parent pointers are stored as namespaced extended attributes
of a file. Because parent pointers are an indivisible tuple of
(dirent_name, parent_ino, parent_gen) we cannot use the usual attr name
lookup functions to find a parent pointer. This is solvable by
introducing a new lookup mode that checks both the name and the value of
the xattr.
Therefore, introduce this new name-value lookup mode that's gated on the
XFS_ATTR_PARENT namespace. This requires the introduction of new
opcodes for the extended attribute update log intent items, which
actually means that parent pointers (itself an INCOMPAT feature) does
not depend on the LOGGED_XATTRS log incompat feature bit.
To reduce collisions on the dirent names of parent pointers, introduce a
new attr hash mode that is the dir2 namehash of the dirent name xor'd
with the parent inode number.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'pptrs-6.10_2024-04-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: enable parent pointers
xfs: drop compatibility minimum log size computations for reflink
xfs: fix unit conversion error in xfs_log_calc_max_attrsetm_res
xfs: add a incompat feature bit for parent pointers
xfs: don't remove the attr fork when parent pointers are enabled
xfs: add parent pointer ioctls
xfs: split out handle management helpers a bit
xfs: move handle ioctl code to xfs_handle.c
xfs: pass the attr value to put_listent when possible
xfs: don't return XFS_ATTR_PARENT attributes via listxattr
xfs: Add parent pointers to xfs_cross_rename
xfs: Add parent pointers to rename
xfs: remove parent pointers in unlink
xfs: add parent attributes to symlink
xfs: add parent attributes to link
xfs: parent pointer attribute creation
xfs: create a hashname function for parent pointers
xfs: extend transaction reservations for parent attributes
xfs: add parent pointer validator functions
xfs: Expose init_xattrs in xfs_create_tmpfile
xfs: record inode generation in xattr update log intent items
xfs: create attr log item opcodes and formats for parent pointers
xfs: refactor xfs_is_using_logged_xattrs checks in attr item recovery
xfs: allow xattr matching on name and value for parent pointers
xfs: define parent pointer ondisk extended attribute format
xfs: add parent pointer support to attribute code
xfs: create a separate hashname function for extended attributes
xfs: move xfs_attr_defer_add to xfs_attr_item.c
xfs: check the flags earlier in xfs_attr_match
xfs: rearrange xfs_attr_match parameters
Prior to introducing parent pointer extended attributes, let's spend
some time cleaning up the attr code and strengthening the validation
that it performs on attrs coming in from the disk.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZih1NgAKCRBKO3ySh0YR
pojvAQD4AF7OO0MFZ8XcLqOAC8IJv/O690+cg7xEtnk5U8NviwD/Yakjfvqo4lLD
N0py4DXg/OIY08gF2BZpLUOiZdSTAAg=
=l8aH
-----END PGP SIGNATURE-----
Merge tag 'improve-attr-validation-6.10_2024-04-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeC
xfs: improve extended attribute validation
Prior to introducing parent pointer extended attributes, let's spend
some time cleaning up the attr code and strengthening the validation
that it performs on attrs coming in from the disk.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'improve-attr-validation-6.10_2024-04-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: enforce one namespace per attribute
xfs: refactor name/value iovec validation in xlog_recover_attri_commit_pass2
xfs: refactor name/length checks in xfs_attri_validate
xfs: use local variables for name and value length in _attri_commit_pass2
xfs: always set args->value in xfs_attri_item_recover
xfs: validate recovered name buffers when recovering xattr items
xfs: use helpers to extract xattr op from opflags
xfs: restructure xfs_attr_complete_op a bit
xfs: check shortform attr entry flags specifically
xfs: fix missing check for invalid attr flags
xfs: check opcode and iovec count match in xlog_recover_attri_commit_pass2
xfs: use an XFS_OPSTATE_ flag for detecting if logged xattrs are available
xfs: require XFS_SB_FEAT_INCOMPAT_LOG_XATTRS for attr log intent item recovery
xfs: attr fork iext must be loaded before calling xfs_attr_is_leaf
Let's clean out some unused flags and fields from struct xfs_da_args.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZih1NgAKCRBKO3ySh0YR
pr16AQDIj2NMtagLvPz/rSFcJPZ4VsGVor0zGQDK08WI79l3dAD/boFN5VpMLGnE
zYE0nXT25OAxo5i97kyQ1WvKyq9uFQM=
=A3+W
-----END PGP SIGNATURE-----
Merge tag 'shrink-dirattr-args-6.10_2024-04-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeC
xfs: shrink struct xfs_da_args
Let's clean out some unused flags and fields from struct xfs_da_args.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'shrink-dirattr-args-6.10_2024-04-23' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: rearrange xfs_da_args a bit to use less space
xfs: make attr removal an explicit operation
xfs: remove xfs_da_args.attr_flags
xfs: remove XFS_DA_OP_NOTIME
xfs: remove XFS_DA_OP_REMOVE
The ATS-M class is PCI_CLASS_DISPLAY_OTHER instead of
PCI_CLASS_DISPLAY_VGA, so we need to match against that class as well.
The matching is still restricted to Intel devices only.
Fixes: ceeedd951f ("mei: pxp: match without driver name")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240421090701.216028-1-tomas.winkler@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As with most architectures, allow handling of read faults in VMAs that
have VM_WRITE but without VM_READ (WRITE implies READ).
Otherwise, reading before writing a write-only memory will error while
reading after writing everything is fine.
BTW, move the VM_EXEC judgement before VM_READ/VM_WRITE to make logic a
little clearer.
Cc: stable@vger.kernel.org
Fixes: 09cfefb7fa ("LoongArch: Add memory management")
Signed-off-by: Jiantao Shan <shanjiantao@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
With LLVM=1 and W=1 we get:
./include/asm-generic/tlb.h:629:10: error: parameter 'ptep' set
but not used [-Werror,-Wunused-but-set-parameter]
We fixed a similar issue via Arnd in the introducing commit, missed the
LoongArch variant. Turns out, there is no need for LoongArch to have a
custom variant, so let's just drop it and rely on the asm-generic one.
Fixes: 4d5bf0b618 ("mm/mmu_gather: add tlb_remove_tlb_entries()")
Closes: https://lkml.kernel.org/r/CANiq72mQh3O9S4umbvrKBgMMorty48UMwS01U22FR0mRyd3cyQ@mail.gmail.com
Reported-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
In commit 85fcde402d ("kexec: split crashkernel reservation code
out from crash_core.c"), crashkernel reservation code is split out from
crash_core.c, and add CRASH_RESERVE to control it. And also rename each
ARCH's <asm/crash_core.h> to <asm/crash_reserve.h> accordingly.
But the relevant part in LoongArch is missed. Do it now.
Fixes: 85fcde402d ("kexec: split crashkernel reservation code out from crash_core.c")
Signed-off-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Now that the driver core can properly handle constant struct bus_type,
move the mei_cl_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Acked-by: Tomas Winkler <tomas.winkler@intel.com>
Link: https://lore.kernel.org/r/20240423024133.1890455-1-chentao@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
adi,asdis16475
- Write the correct field in the register when setting the sync mode.
bosch,bmp280
- Wrong chip specific data being used for the bme280 in the SPI driver.
- Fix that we can't use chip IDs because Bosch reuses them for incompatible
devices (some require a padding byte, others don't).
maxim,max30102 (dt binding)
- Fix incorrect property check to actually match on a device from the
binding rather than a completely different one due to a typo.
memsic,mxc4005
- Fix wrong masking of interrupt register accidentally disabling temperature
compensation. Also hammer initial state to 0 as it's not documented
if interrupts are masked after reset.
- Explicit reset on probe() and resume() as some devices do not power up
correctly without a reset.
-----BEGIN PGP SIGNATURE-----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=e50P
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-for-6.9a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-linus
Jonathan writes:
IIO: 1st set of fixes for the 6.9 cycle.
adi,asdis16475
- Write the correct field in the register when setting the sync mode.
bosch,bmp280
- Wrong chip specific data being used for the bme280 in the SPI driver.
- Fix that we can't use chip IDs because Bosch reuses them for incompatible
devices (some require a padding byte, others don't).
maxim,max30102 (dt binding)
- Fix incorrect property check to actually match on a device from the
binding rather than a completely different one due to a typo.
memsic,mxc4005
- Fix wrong masking of interrupt register accidentally disabling temperature
compensation. Also hammer initial state to 0 as it's not documented
if interrupts are masked after reset.
- Explicit reset on probe() and resume() as some devices do not power up
correctly without a reset.
* tag 'iio-fixes-for-6.9a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio:imu: adis16475: Fix sync mode setting
iio: accel: mxc4005: Reset chip on probe() and resume()
iio: accel: mxc4005: Interrupt handling fixes
dt-bindings: iio: health: maxim,max30102: fix compatible check
iio: pressure: Fixes SPI support for BMP3xx devices
iio: pressure: Fixes BME280 SPI driver data
The default nna (node_nr_active) is used when the pool isn't tied to a
specific NUMA node. This can happen in the following cases:
1. On NUMA, if per-node pwq init failure and the fallback pwq is used.
2. On NUMA, if a pool is configured to span multiple nodes.
3. On single node setups.
5797b1c189 ("workqueue: Implement system-wide nr_active enforcement for
unbound workqueues") set the default nna->max to min_active because only #1
was being considered. For #2 and #3, using min_active means that the max
concurrency in normal operation is pushed down to min_active which is
currently 8, which can obviously lead to performance issues.
exact value nna->max is set to doesn't really matter. #2 can only happen if
the workqueue is intentionally configured to ignore NUMA boundaries and
there's no good way to distribute max_active in this case. #3 is the default
behavior on single node machines.
Let's set it the default nna->max to max_active. This fixes the artificially
lowered concurrency problem on single node machines and shouldn't hurt
anything for other cases.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 5797b1c189 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Link: https://lore.kernel.org/dm-devel/20240410084531.2134621-1-shinichiro.kawasaki@wdc.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit 8996f93fc3 ("cgroup/cpuset: Statically initialize more
members of top_cpuset") uses an incorrect "<" relational operator for
the CS_SCHED_LOAD_BALANCE bit when initializing the top_cpuset. This
results in load_balancing turned off by default in the top cpuset which
is bad for performance.
Fix this by using the BIT() helper macro to set the desired top_cpuset
flags and avoid similar mistake from being made in the future.
Fixes: 8996f93fc3 ("cgroup/cpuset: Statically initialize more members of top_cpuset")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Delete fence fallback timer to fix the ramdom
use-after-free issue.
v2: move to amdgpu_mes.c
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This avoids a potential conflict with firmwares with the newer
HDP flush mechanism.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Here are the corrections needed for the queue ring buffer size
calculation for the following cases:
- Remove the KIQ VM flush ring usage.
- Add the invalidate TLBs packet for gfx10 and gfx11 queue.
- There's no VM flush and PFP sync, so remove the gfx9 real
ring and compute ring buffer usage.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do VRAM accounting when doing migrations to vram to make sure
there is enough available VRAM and migrating to VRAM doesn't evict
other possible non-unified memory BOs. If migrating to VRAM fails,
driver can fall back to using system memory seamlessly.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
During mode-2 reset, pci config space registers are affected at device
side. However, certain platforms have switches which assign virtual BAR
addresses and returns the same even after device is reset. This
affects pci_restore_state() as it doesn't issue another config write, if
the value read is same as the saved value.
Add a workaround to write saved config space values from driver side.
Presently, these switches are in platforms with SMU v13.0.6 SOCs, hence
restrict the workaround only to those.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
umsch test needs full GPU functionality(e.g., VM update, TLB flush,
possibly buffer moving under memory pressure) which may be not ready
under these states. Just skip it to avoid potential issues.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Handle the case that the restore worker was already scheduled by another
eviction while the restore was in progress.
Fixes: 9a1c1339ab ("drm/amdkfd: Run restore_workers on freezable WQs")
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Yunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Make SVM BOs more likely to get evicted than other BOs. These BOs
opportunistically use available VRAM, but can fall back relatively
seamlessly to system memory. It also avoids SVM migrations evicting
other, more important BOs as they will evict other SVM allocations
first.
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Acked-by: Mukul Joshi <mukul.joshi@amd.com>
Tested-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vpe dpm settings should be done before firmware is loaded.
Otherwise, the frequency cannot be successfully raised.
Signed-off-by: Peyton Lee <peytolee@amd.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
HDP Flush request bit can be kept unique per AID, and doesn't need to be
unique SOC-wide. Assign only bits 10-13 for SDMA v4.4.2.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
gpu_od should be removed if it's an empty directory
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Reported-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Suggested-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
When page table BOs were evicted but not validated before
updating page tables, VM is still in evicting state,
amdgpu_vm_update_range returns -EBUSY and
restore_process_worker runs into a dead loop.
v2: Split the BO validation and page table update into two
separate loops in amdgpu_amdkfd_restore_process_bos. (Felix)
1.Validate BOs
2.Validate VM (and DMABuf attachments)
3.Update page tables for the BOs validated above
Fixes: 50661eb1a2 ("drm/amdgpu: Auto-validate DMABuf imports in compute VMs")
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The Analog Device team (Paul Cercueil and Nuno Sa) have been working on
improving high speed device handling. They have had some support in their
own tree for many years, so it is great to see them bring it to upstream.
Some of that is seen here, with the first output device using the
IIO dmaengine infrastructure and a new DAC backend FPGA IP driver.
This makes use of a new set of interfaces to allow backend and
front end driver communication in a fashion that in theory at least
allows for a single driver for a given ADC / DAC independent of
the IP to which is being used to deal with the data bus and DMA aspects
of working with these devices. It is early days for this new
generic way of handling split devices, but as it's kernel internals only
we can merrily change anything about it as a wider diversity of devices
show up and we get a better feel for what works.
Alongside the usual set of new drivers and features we have
the automatic cleanup of fwnode_handle_put() which didn't quite make
it in last cycle. The equivalent DT version was merged by Rob Herring
via the DT binding tree and one patch using that in IIO can also be
found in this pull request. Rob has been making extensive use of that
infrastructure in the DT core which is good to see and provides more
evidence this basic approach is useful.
In some cases, the IIO driver was converted over from DT only to
using the generic firmware description handling of property.h
including using the new macros. The general preference for IIO
is to use this more generic handling where possible - a bunch of other
drivers have been converted this cycle as well.
New device support
==================
adi,ad7173
- New driver supporting AD7172-2, AD7172-4 AD7173-9, AD7175-2, AD7175-8,
AD7176-2 and AD7177-2 ADCs.
- Follow up fix for an accidental use of logic not instead of bitwise.
adi,ad7944
- New driver supporting AD7944, AD7985 and AD7986 pin compatible ADCs.
- Later patch added use of new spi_optimize_message() to reduce overheads
of setting up a reused message.
- Additional changes later in series reduced code duplication.
adi,ad9739a RF DAC
- New driver for this 14-bit 2.5 GSPS DAC via an LVDS interface.
adi,axi-dac
- Support for this FPGA IP used to send data to high performance DACs over
an interface such as JESD204B/C or parallel interfaces. Used in
conjunction with a DAC driver. The initial user is the ad9739a.
The dmaengine-buffer needed various changes to make it bidirectional.
avago,apds9306
- New driver for this ambient light sensor.
- Fix much later in this pull for an off by 1 error.
New device IDs
==============
For these at most an ID and a instance of chip specific data was needed.
Always nice to see manufacturers sticking to an existing software interface
for new parts.
allwinner,sun20i
- Add support for h616.
invensense,mpu6050
- Add support for ICM42688
maxim,max30102
- Add compatible for MAX30101
ti,dac5571
- Add compatible for DAC081C081
General
=======
fwnode_handle
- Support for cleanup.h based __free(fwnode_handle)
- Loop macro using this for looping over child nodes without needing to
call fwnode_handle_put() in ever early exit from the loop.
- Used in:
* adi,ad3552r
* adi,ad4130
* adi,ad5770r
* adi,ad74413r
* adi,ad7173
* adi,adfm2000
* linear,ltc2688
* linear,ltc2983
* maxim,max11410
* microchip,pac1934
* qcom,spmi-adc
* renesas,rz2gl
* st,ab8500
* st,stm32 (Fix for failure to set return value precedes this patch,
providing an example of why enabling direct returns makes bugs
less likely)
- Conversions to fwnode also using the cleanup logic
* adi,ad7124
* adi,ad7292
* freescale,fsl-imx25-gcq
- Other conversions to fwnode where the new cleanup handling isn't useful
* adi,ad7192
* avia,hx711
* freescale,mma8452
* nxp,fxls8962af
* st,spear
* ti,twl4030
Features
========
adi,adxl345
- Support SPI_3WIRE mode.
adi,ad9944
- Support 3-wire mode, note this isn't normal 3-wire SPI (unlike the
adxl345 change above), but rather a wiring scheme where the SPI
chip select is used to trigger conversions rather than using a
separate pin.
- Add some device specific documentation, mostly around the various wiring
schemes.
invensense,mpu6050
- Add Wake on Motion support as an IIO event and as a wake-up source.
linear,ltc2983
- Add vdd-supply.
ti,hdc3020
- Add power management using trigger on demand mode and adding suspend and
resume handling.
- Use reset GPIO if available.
Cleanup and fixes
================
iio core
- Use the various autocleanup and lock guards from cleanup.h to simplify
the IIO core.
- Don't set the pointer used for iio_priv() if it is zero sized as that
points beyond the end of the allocation. No driver actually uses it
in that case but good to clean this up.
various drivers
- Drop unnecessary casts of other pointer types to void *
docs
- Add missing ABI entry for in_temp_input.
adi,adx345
- General cleanup prior to adding spi-3wire mode.
adi,axi-adc
- Be more flexible and allow minor version changes as these are expected
to be backwards compatible.
avago,apds9300/9600
- Merge near identical bindings. The drivers are quite different, but
the bindings can be shared. The apds9306 binding introduced in this
series uses this shared binding doc as well.
- Add missing vdd-supply
- Update binding to use IRQ_TYPE_LEVEL_LOW instead of 8.
bosch,bmp280
- Organize headers
freescale,fxl-imx25-gcq
- Use devm_ for remaining probe() time setup allowing dropping
of specific error handling and remove() functions.
infineon,dps310
- Fix handling of negative temperatures
- Bring style of other similar calls inline with the form needed
for temperatures
- Ensure error handling of regmap calls is consistent within the driver.
- Simplify scale reading logic.
invensense,mpu6050
- Flip logic in binding to exclude devices without i2c-gate instead
of opting in. The list is expected to be much shorter as all recent
devices support this feature.
honeywell,hsc030pa
- Use spi_read() instead of opening coding.
renesas,rcar
- Use device_for_each_child_of_node_scoped() to remove need to manually
release. Left over from series the rest of which went in during 6.9.
st,ab8500
- Fix naming of function parameters in kernel-doc
-----BEGIN PGP SIGNATURE-----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=dr8B
-----END PGP SIGNATURE-----
Merge tag 'iio-for-6.10a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 1st set of new device support, features and cleanup for 6.10
The Analog Device team (Paul Cercueil and Nuno Sa) have been working on
improving high speed device handling. They have had some support in their
own tree for many years, so it is great to see them bring it to upstream.
Some of that is seen here, with the first output device using the
IIO dmaengine infrastructure and a new DAC backend FPGA IP driver.
This makes use of a new set of interfaces to allow backend and
front end driver communication in a fashion that in theory at least
allows for a single driver for a given ADC / DAC independent of
the IP to which is being used to deal with the data bus and DMA aspects
of working with these devices. It is early days for this new
generic way of handling split devices, but as it's kernel internals only
we can merrily change anything about it as a wider diversity of devices
show up and we get a better feel for what works.
Alongside the usual set of new drivers and features we have
the automatic cleanup of fwnode_handle_put() which didn't quite make
it in last cycle. The equivalent DT version was merged by Rob Herring
via the DT binding tree and one patch using that in IIO can also be
found in this pull request. Rob has been making extensive use of that
infrastructure in the DT core which is good to see and provides more
evidence this basic approach is useful.
In some cases, the IIO driver was converted over from DT only to
using the generic firmware description handling of property.h
including using the new macros. The general preference for IIO
is to use this more generic handling where possible - a bunch of other
drivers have been converted this cycle as well.
New device support
==================
adi,ad7173
- New driver supporting AD7172-2, AD7172-4 AD7173-9, AD7175-2, AD7175-8,
AD7176-2 and AD7177-2 ADCs.
- Follow up fix for an accidental use of logic not instead of bitwise.
adi,ad7944
- New driver supporting AD7944, AD7985 and AD7986 pin compatible ADCs.
- Later patch added use of new spi_optimize_message() to reduce overheads
of setting up a reused message.
- Additional changes later in series reduced code duplication.
adi,ad9739a RF DAC
- New driver for this 14-bit 2.5 GSPS DAC via an LVDS interface.
adi,axi-dac
- Support for this FPGA IP used to send data to high performance DACs over
an interface such as JESD204B/C or parallel interfaces. Used in
conjunction with a DAC driver. The initial user is the ad9739a.
The dmaengine-buffer needed various changes to make it bidirectional.
avago,apds9306
- New driver for this ambient light sensor.
- Fix much later in this pull for an off by 1 error.
New device IDs
==============
For these at most an ID and a instance of chip specific data was needed.
Always nice to see manufacturers sticking to an existing software interface
for new parts.
allwinner,sun20i
- Add support for h616.
invensense,mpu6050
- Add support for ICM42688
maxim,max30102
- Add compatible for MAX30101
ti,dac5571
- Add compatible for DAC081C081
General
=======
fwnode_handle
- Support for cleanup.h based __free(fwnode_handle)
- Loop macro using this for looping over child nodes without needing to
call fwnode_handle_put() in ever early exit from the loop.
- Used in:
* adi,ad3552r
* adi,ad4130
* adi,ad5770r
* adi,ad74413r
* adi,ad7173
* adi,adfm2000
* linear,ltc2688
* linear,ltc2983
* maxim,max11410
* microchip,pac1934
* qcom,spmi-adc
* renesas,rz2gl
* st,ab8500
* st,stm32 (Fix for failure to set return value precedes this patch,
providing an example of why enabling direct returns makes bugs
less likely)
- Conversions to fwnode also using the cleanup logic
* adi,ad7124
* adi,ad7292
* freescale,fsl-imx25-gcq
- Other conversions to fwnode where the new cleanup handling isn't useful
* adi,ad7192
* avia,hx711
* freescale,mma8452
* nxp,fxls8962af
* st,spear
* ti,twl4030
Features
========
adi,adxl345
- Support SPI_3WIRE mode.
adi,ad9944
- Support 3-wire mode, note this isn't normal 3-wire SPI (unlike the
adxl345 change above), but rather a wiring scheme where the SPI
chip select is used to trigger conversions rather than using a
separate pin.
- Add some device specific documentation, mostly around the various wiring
schemes.
invensense,mpu6050
- Add Wake on Motion support as an IIO event and as a wake-up source.
linear,ltc2983
- Add vdd-supply.
ti,hdc3020
- Add power management using trigger on demand mode and adding suspend and
resume handling.
- Use reset GPIO if available.
Cleanup and fixes
================
iio core
- Use the various autocleanup and lock guards from cleanup.h to simplify
the IIO core.
- Don't set the pointer used for iio_priv() if it is zero sized as that
points beyond the end of the allocation. No driver actually uses it
in that case but good to clean this up.
various drivers
- Drop unnecessary casts of other pointer types to void *
docs
- Add missing ABI entry for in_temp_input.
adi,adx345
- General cleanup prior to adding spi-3wire mode.
adi,axi-adc
- Be more flexible and allow minor version changes as these are expected
to be backwards compatible.
avago,apds9300/9600
- Merge near identical bindings. The drivers are quite different, but
the bindings can be shared. The apds9306 binding introduced in this
series uses this shared binding doc as well.
- Add missing vdd-supply
- Update binding to use IRQ_TYPE_LEVEL_LOW instead of 8.
bosch,bmp280
- Organize headers
freescale,fxl-imx25-gcq
- Use devm_ for remaining probe() time setup allowing dropping
of specific error handling and remove() functions.
infineon,dps310
- Fix handling of negative temperatures
- Bring style of other similar calls inline with the form needed
for temperatures
- Ensure error handling of regmap calls is consistent within the driver.
- Simplify scale reading logic.
invensense,mpu6050
- Flip logic in binding to exclude devices without i2c-gate instead
of opting in. The list is expected to be much shorter as all recent
devices support this feature.
honeywell,hsc030pa
- Use spi_read() instead of opening coding.
renesas,rcar
- Use device_for_each_child_of_node_scoped() to remove need to manually
release. Left over from series the rest of which went in during 6.9.
st,ab8500
- Fix naming of function parameters in kernel-doc
* tag 'iio-for-6.10a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (108 commits)
iio: adc: ti-ads131e08: Use device_for_each_child_node_scoped() to simplify error paths.
iio: adc: adi-axi-adc: only error out in major version mismatch
iio: dac: support the ad9739a RF DAC
iio: dac: add support for AXI DAC IP core
iio: backend: add new functionality
dt-bindings: iio: dac: add docs for AD9739A
dt-bindings: iio: dac: add docs for AXI DAC IP
iio: buffer-dmaengine: Enable write support
iio: buffer-dmaengine: Support specifying buffer direction
iio: buffer-dma: Enable buffer write support
iio: buffer-dma: Rename iio_dma_buffer_data_available()
iio: buffer-dma: add iio_dmaengine_buffer_setup()
iio: pressure: dps310: simplify scale factor reading
iio: pressure: dps310: consistently check return value of `regmap_read`
iio: pressure: dps310: introduce consistent error handling
iio: pressure: dps310: support negative temperature values
dt-bindings: iio: adc: Add GPADC for Allwinner H616
iio: dac: ad5755: make use of of_device_id table
iio: imu: inv_icm42600: add support of ICM-42688-P
dt-bindings: iio: imu: add icm42688 inside inv_icm42600
...
Free the sync object if the memory allocation fails for any
reason.
Signed-off-by: Mukul Joshi <mukul.joshi@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Handle case that dma_fence_get_rcu_safe returns NULL.
If restore work is already scheduled, only update its timer. The same
work item cannot be queued twice, so undo the extra queue eviction.
Fixes: 9a1c1339ab ("drm/amdkfd: Run restore_workers on freezable WQs")
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Tested-by: Gang BA <Gang.Ba@amd.com>
Reviewed-by: Gang BA <Gang.Ba@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Otherwise we can end up with a frame on unsuspend where color management
is not applied when userspace has not committed themselves.
Fixes re-applying color management on Steam Deck/Gamescope on S3 resume.
Signed-off-by: Joshua Ashton <joshua@froggi.es>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Power event IRQ is used for wakeup either when the controller is
SuperSpeed capable but is missing an SuperSpeed PHY interrupt, or when
the GIC is not capable of detecting DP/DM High-Speed PHY interrupts.
The Power event IRQ stat register indicates whether the High-Speed
phy entered and exited L2 successfully during suspend and resume.
Indicate the same for all ports of a multiport controller.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240420044901.884098-10-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
DWC3 Qcom wrapper currently supports only wakeup configuration
for single port controllers. Read speed of each port connected
to the controller and enable wakeup for each of them accordingly.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240420044901.884098-9-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On multiport supported controllers, each port has its own DP/DM and
SuperSpeed (if super speed capable) interrupts. As per the bindings,
their interrupt names differ from single-port ones by having a "_x"
added as suffix (x being the port number). Identify from the interrupt
names whether the controller is a multiport controller or not.
Refactor dwc3_qcom_setup_irq() call to parse multiportinterrupts along
with non-multiport ones accordingly.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240420044901.884098-8-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The logic for requesting interrupts is duplicated for each interrupt. In
the upcoming patches that introduces support for multiport, it would be
better to clean up the duplication before reading mulitport related
interrupts.
Refactor interrupt setup call by adding a new helper function for
requesting the wakeup interrupts. To simplify implementation, make
the display name same as the interrupt name expected in Device tree.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240420044901.884098-7-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add the compatible string for SC8280 Multiport USB controller from
Qualcomm.
There are 4 power event interrupts supported by this controller
(one for each port of multiport controller). Add all the 4 as
non-optional interrupts for SC8280XP-MP
Also each port of multiport has one DP and one DM IRQ. Add all DP/DM
IRQs related to 4 ports of SC8280XP Teritiary controller.
Also added SuperSpeed PHY interrupt for both Superspeed ports.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240420044901.884098-6-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the DWC3 driver supports only single port controller
which requires at least one HS PHY and at most one SS PHY.
But the DWC3 USB controller can be connected to multiple ports and
each port can have their own PHYs. Each port of the multiport
controller can either be HS+SS capable or HS only capable
Proper quantification of them is required to modify GUSB2PHYCFG
and GUSB3PIPECTL registers appropriately.
DWC3 multiport controllers are capable to service at most 15 High Speed
PHYs and 4 Supser Speed PHYs. Add support for detecting, obtaining and
configuring PHYs supported by a multiport controller.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240420044901.884098-5-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On some SoC's like SA8295P where the tertiary controller is host-only
capable, GEVTADDRHI/LO, GEVTSIZ, GEVTCOUNT registers are not accessible.
Trying to access them leads to a crash.
For DRD/Peripheral supported controllers, event buffer setup is done
again in gadget_pullup. Skip setup or cleanup of event buffers if
controller is host-only capable.
Suggested-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240420044901.884098-4-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All DWC3 Multi Port controllers that exist today only support host mode.
Temporarily map XHCI address space for host-only controllers and parse
XHCI Extended Capabilities registers to read number of usb2 ports and
usb3 ports present on multiport controller. Each USB Port is at least HS
capable.
The port info for usb2 and usb3 phy are identified as num_usb2_ports
and num_usb3_ports and these are used as iterators for phy operations
and for modifying GUSB2PHYCFG/ GUSB3PIPECTL registers accordingly.
Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
Reviewed-by: Bjorn Andersson <quic_bjorande@quicinc.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20240420044901.884098-3-quic_kriskura@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Tissoires says:
====================
Introduce bpf_wq
This is a followup of sleepable bpf_timer[0].
When discussing sleepable bpf_timer, it was thought that we should give
a try to bpf_wq, as the 2 APIs are similar but distinct enough to
justify a new one.
So here it is.
I tried to keep as much as possible common code in kernel/bpf/helpers.c
but I couldn't get away with code duplication in kernel/bpf/verifier.c.
This series introduces a basic bpf_wq support:
- creation is supported
- assignment is supported
- running a simple bpf_wq is also supported.
We will probably need to extend the API further with:
- a full delayed_work API (can be piggy backed on top with a correct
flag)
- bpf_wq_cancel() <- apparently not, this is shooting ourself in the
foot
- bpf_wq_cancel_sync() (for sleepable programs)
- documentation
---
For reference, the use cases I have in mind:
---
Basically, I need to be able to defer a HID-BPF program for the
following reasons (from the aforementioned patch):
1. defer an event:
Sometimes we receive an out of proximity event, but the device can not
be trusted enough, and we need to ensure that we won't receive another
one in the following n milliseconds. So we need to wait those n
milliseconds, and eventually re-inject that event in the stack.
2. inject new events in reaction to one given event:
We might want to transform one given event into several. This is the
case for macro keys where a single key press is supposed to send
a sequence of key presses. But this could also be used to patch a
faulty behavior, if a device forgets to send a release event.
3. communicate with the device in reaction to one event:
We might want to communicate back to the device after a given event.
For example a device might send us an event saying that it came back
from sleeping state and needs to be re-initialized.
Currently we can achieve that by keeping a userspace program around,
raise a bpf event, and let that userspace program inject the events and
commands.
However, we are just keeping that program alive as a daemon for just
scheduling commands. There is no logic in it, so it doesn't really justify
an actual userspace wakeup. So a kernel workqueue seems simpler to handle.
bpf_timers are currently running in a soft IRQ context, this patch
series implements a sleppable context for them.
Cheers,
Benjamin
[0] https://lore.kernel.org/all/20240408-hid-bpf-sleepable-v6-0-0499ddd91b94@kernel.org/
Changes in v2:
- took previous review into account
- mainly dropped BPF_F_WQ_SLEEPABLE
- Link to v1: https://lore.kernel.org/r/20240416-bpf_wq-v1-0-c9e66092f842@kernel.org
====================
Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-0-6c986a5a741f@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We assign the callback and set everything up.
The actual tests of these callbacks will be done when bpf_wq_start() is
available.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-14-6c986a5a741f@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
To support sleepable async callbacks, we need to tell push_async_cb()
whether the cb is sleepable or not.
The verifier now detects that we are in bpf_wq_set_callback_impl and
can allow a sleepable callback to happen.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-13-6c986a5a741f@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We need to teach the verifier about the second argument which is declared
as void * but which is of type KF_ARG_PTR_TO_MAP. We could have dropped
this extra case if we declared the second argument as struct bpf_map *,
but that means users will have to do extra casting to have their program
compile.
We also need to duplicate the timer code for the checking if the map
argument is matching the provided workqueue.
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Link: https://lore.kernel.org/r/20240420-bpf_wq-v2-11-6c986a5a741f@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
