If the USB driver passes a pointer into the TRB buffer for creq, this
buffer can be overwritten with the status response as soon as the event
is queued. This can make the final check return USB_GADGET_DELAYED_STATUS
when it shouldn't. Instead use the stored wLength.
Fixes: 4d644abf25 ("usb: gadget: f_fs: Only return delayed status when len is 0")
Cc: stable <stable@kernel.org>
Signed-off-by: Chris Wulff <chris.wulff@biamp.com>
Link: https://lore.kernel.org/r/CO1PR17MB5419BD664264A558B2395E28E1112@CO1PR17MB5419.namprd17.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Testing with KASAN and syzkaller revealed a bug in port.c:disable_store():
usb_hub_to_struct_hub() can return NULL if the hub that the port belongs to
is concurrently removed, but the function does not check for this
possibility before dereferencing the returned value.
It turns out that the first dereference is unnecessary, since hub->intfdev
is the parent of the port device, so it can be changed easily. Adding a
check for hub == NULL prevents further problems.
The same bug exists in the disable_show() routine, and it can be fixed the
same way.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Yue Sun <samsun1006219@gmail.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Link: https://lore.kernel.org/linux-usb/CAEkJfYON+ry7xPx=AiLR9jzUNT+i_Va68ACajOC3HoacOfL1ig@mail.gmail.com/
Fixes: f061f43d74 ("usb: hub: port: add sysfs entry to switch port power")
CC: Michael Grzeschik <m.grzeschik@pengutronix.de>
CC: stable@vger.kernel.org
Link: https://lore.kernel.org/r/393aa580-15a5-44ca-ad3b-6462461cd313@rowland.harvard.edu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GUSB3PIPECTL.SUSPENDENABLE and GUSB2PHYCFG.SUSPHY should be cleared
during initialization. Suspend during initialization can result in
undefined behavior due to clock synchronization failure, which often
seen as core soft reset timeout.
The programming guide recommended these bits to be cleared during
initialization for DWC_usb3.0 version 1.94 and above (along with
DWC_usb31 and DWC_usb32). The current check in the driver does not
account if it's set by default setting from coreConsultant.
This is especially the case for DRD when switching mode to ensure the
phy clocks are available to change mode. Depending on the
platforms/design, some may be affected more than others. This is noted
in the DWC_usb3x programming guide under the above registers.
Let's just disable them during driver load and mode switching. Restore
them when the controller initialization completes.
Note that some platforms workaround this issue by disabling phy suspend
through "snps,dis_u3_susphy_quirk" and "snps,dis_u2_susphy_quirk" when
they should not need to.
Cc: stable@vger.kernel.org
Fixes: 9ba3aca8fe ("usb: dwc3: Disable phy suspend after power-on reset")
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20da4e5a0c4678c9587d3da23f83bdd6d77353e9.1713394973.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit fixes uvc gadget support on 32-bit platforms.
Commit 0df28607c5 ("usb: gadget: uvc: Generalise helper functions for
reuse") introduced a helper function __uvcg_iter_item_entries() to aid
with parsing lists of items on configfs attributes stores. This function
is a generalization of another very similar function, which used a
stack-allocated temporary buffer of fixed size for each item in the list
and used the sizeof() operator to check for potential buffer overruns.
The new function was changed to allocate the now variably sized temp
buffer on heap, but wasn't properly updated to also check for max buffer
size using the computed size instead of sizeof() operator.
As a result, the maximum item size was 7 (plus null terminator) on
64-bit platforms, and 3 on 32-bit ones. While 7 is accidentally just
barely enough, 3 is definitely too small for some of UVC configfs
attributes. For example, dwFrameInteval, specified in 100ns units,
usually has 6-digit item values, e.g. 166666 for 60fps.
Cc: stable@vger.kernel.org
Fixes: 0df28607c5 ("usb: gadget: uvc: Generalise helper functions for reuse")
Signed-off-by: Ivan Avdeev <me@provod.works>
Link: https://lore.kernel.org/r/20240413150124.1062026-1-me@provod.works
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Convert USB UHCI bindings to DT schema. Documenting aspeed compatibles
and missing properties. Adding aspeed/generic-uhci example and fixing
nodename for the original example.
Signed-off-by: Mohammad Shehar Yaar Tausif <sheharyaar48@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240423150550.91055-1-sheharyaar48@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Update Qualcomm PMIC Type-C examples to follow the USB-C connector
schema. The USB-C connector should have three ports (USB HS @0,
SSTX/RX @1 and SBU @2 lanes). Reorder ports accordingly and add SBU port
connected to the SBU mux (e.g. FSA4480).
Reported-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240418-typec-fix-example-v3-1-08f649b6f368@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The OS descriptors logic had the high/low byte of w_value inverted, causing
the extended properties to not be accessible for interface != 0.
>From the Microsoft documentation:
https://learn.microsoft.com/en-us/windows-hardware/drivers/usbcon/microsoft-os-1-0-descriptors-specification
OS_Desc_CompatID.doc (w_index = 0x4):
- wValue:
High Byte = InterfaceNumber. InterfaceNumber is set to the number of the
interface or function that is associated with the descriptor, typically
0x00. Because a device can have only one extended compat ID descriptor,
it should ignore InterfaceNumber, regardless of the value, and simply
return the descriptor.
Low Byte = 0. PageNumber is used to retrieve descriptors that are larger
than 64 KB. The header section is 16 bytes, so PageNumber is set to 0 for
this request.
We currently do not support >64KB compat ID descriptors, so verify that the
low byte is 0.
OS_Desc_Ext_Prop.doc (w_index = 0x5):
- wValue:
High byte = InterfaceNumber. The high byte of wValue is set to the number
of the interface or function that is associated with the descriptor.
Low byte = PageNumber. The low byte of wValue is used to retrieve
descriptors that are larger than 64 KB. The header section is 10 bytes, so
PageNumber is set to 0 for this request.
We also don't support >64KB extended properties, so verify that the low byte
is 0 and use the high byte for the interface number.
Fixes: 37a3a53342 ("usb: gadget: OS Feature Descriptors support")
Cc: stable <stable@kernel.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Link: https://lore.kernel.org/r/20240404100635.3215340-1-peter@korsgaard.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
FFS based applications can utilize the aio_cancel() callback to dequeue
pending USB requests submitted to the UDC. There is a scenario where the
FFS application issues an AIO cancel call, while the UDC is handling a
soft disconnect. For a DWC3 based implementation, the callstack looks
like the following:
DWC3 Gadget FFS Application
dwc3_gadget_soft_disconnect() ...
--> dwc3_stop_active_transfers()
--> dwc3_gadget_giveback(-ESHUTDOWN)
--> ffs_epfile_async_io_complete() ffs_aio_cancel()
--> usb_ep_free_request() --> usb_ep_dequeue()
There is currently no locking implemented between the AIO completion
handler and AIO cancel, so the issue occurs if the completion routine is
running in parallel to an AIO cancel call coming from the FFS application.
As the completion call frees the USB request (io_data->req) the FFS
application is also referencing it for the usb_ep_dequeue() call. This can
lead to accessing a stale/hanging pointer.
commit b566d38857 ("usb: gadget: f_fs: use io_data->status consistently")
relocated the usb_ep_free_request() into ffs_epfile_async_io_complete().
However, in order to properly implement locking to mitigate this issue, the
spinlock can't be added to ffs_epfile_async_io_complete(), as
usb_ep_dequeue() (if successfully dequeuing a USB request) will call the
function driver's completion handler in the same context. Hence, leading
into a deadlock.
Fix this issue by moving the usb_ep_free_request() back to
ffs_user_copy_worker(), and ensuring that it explicitly sets io_data->req
to NULL after freeing it within the ffs->eps_lock. This resolves the race
condition above, as the ffs_aio_cancel() routine will not continue
attempting to dequeue a request that has already been freed, or the
ffs_user_copy_work() not freeing the USB request until the AIO cancel is
done referencing it.
This fix depends on
commit b566d38857 ("usb: gadget: f_fs: use io_data->status
consistently")
Fixes: 2e4c7553cd ("usb: gadget: f_fs: add aio support")
Cc: stable <stable@kernel.org> # b566d38857 ("usb: gadget: f_fs: use io_data->status consistently")
Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com>
Link: https://lore.kernel.org/r/20240409014059.6740-1-quic_wcheng@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In V3D, the conclusion of a job is indicated by a IRQ. When a job
finishes, then we update the local and the global GPU stats of that
queue. But, while the GPU stats are being updated, a user might be
reading the stats from sysfs or fdinfo.
For example, on `gpu_stats_show()`, we could think about a scenario where
`v3d->queue[queue].start_ns != 0`, then an interrupt happens, we update
the value of `v3d->queue[queue].start_ns` to 0, we come back to
`gpu_stats_show()` to calculate `active_runtime` and now,
`active_runtime = timestamp`.
In this simple example, the user would see a spike in the queue usage,
that didn't match reality.
In order to address this issue properly, use a seqcount to protect read
and write sections of the code.
Fixes: 09a93cc4f7 ("drm/v3d: Implement show_fdinfo() callback for GPU usage stats")
Reported-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240420213632.339941-7-mcanal@igalia.com
Create a function to decouple the stats calculation from the printing.
This will be useful in the next step when we add a seqcount to protect
the stats.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240420213632.339941-6-mcanal@igalia.com
Given a set of GPU stats, that is, a `struct v3d_stats` related to a
queue in a given context, create a function that can update this set
of GPU stats.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240420213632.339941-5-mcanal@igalia.com
This will make it easier to instantiate the GPU stats variables and it
will create a structure where we can store all the variables that refer
to GPU stats.
Note that, when we created the struct `v3d_stats`, we renamed
`jobs_sent` to `jobs_completed`. This better express the semantics of
the variable, as we are only accounting jobs that have been completed.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240420213632.339941-4-mcanal@igalia.com
Currently, we manually perform all operations to update the GPU stats
variables. Apart from the code repetition, this is very prone to errors,
as we can see on commit 35f4f8c9fc ("drm/v3d: Don't increment
`enabled_ns` twice").
Therefore, create two functions to manage updating all GPU stats
variables. Now, the jobs only need to call for `v3d_job_update_stats()`
when the job is done and `v3d_job_start_stats()` when starting the job.
Co-developed-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Tvrtko Ursulin <tursulin@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240420213632.339941-3-mcanal@igalia.com
Nobody checks the error flag on isofs folios, so stop setting and
clearing it.
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240420025029.2166544-14-willy@infradead.org>
Nobody checks this flag on ext2 folios, stop setting it.
Cc: Jan Kara <jack@suse.com>
Cc: linux-ext4@vger.kernel.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240420025029.2166544-10-willy@infradead.org>
This patch fixes to return -ENOMEM in case of an allocation failure that
was forgotten to change in commit 6c648035cb ("dlm: switch to use
rhashtable for rsbs").
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202404200536.jGi6052v-lkp@intel.com/
Fixes: 6c648035cb ("dlm: switch to use rhashtable for rsbs")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
We enumerate devices by attempting config reads to the Vendor ID of each
possible device. On conventional PCI, if no device responds, the read
terminates with a Master Abort (PCI r3.0, sec 6.1). On PCIe, the config
read is terminated as an Unsupported Request (PCIe r6.0, sec 2.3.2,
7.5.1.3.7). In either case, if the read addressed a device below a bridge,
it is logged by setting "Received Master Abort" in the bridge Secondary
Status register.
Clear any errors logged in the Secondary Status register after enumeration.
Link: https://lore.kernel.org/r/20240116143258.483235-1-vidyas@nvidia.com
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
[bhelgaas: simplify commit log]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Support the following ioctls for CDX devices:
- VFIO_DEVICE_GET_IRQ_INFO
- VFIO_DEVICE_SET_IRQS
This allows user to set an eventfd for cdx device interrupts and
trigger this interrupt eventfd from userspace.
All CDX device interrupts are MSIs. The MSIs are allocated from the
CDX-MSI domain.
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Link: https://lore.kernel.org/r/20240423111021.1686144-2-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
MSI functions for allocation and free can be directly used by
the device drivers without any wrapper provided by bus drivers.
So export these MSI functions.
Also, add a wrapper API to allocate MSIs providing only the
number of interrupts rather than range for simpler driver usage.
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240423111021.1686144-1-nipun.gupta@amd.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Commit 073237281a ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT
UUID for non-AMD systems") attempted to avoid evaluating the same Low-
Power S0 Idle _DSM functions for different UUIDs, but that turns out to
be a mistake, because some systems in the field are adversely affected
by it.
Address this by allowing all Low-Power S0 Idle _DSM functions to be
evaluated, but still print the message regarding duplication of Low-
Power S0 Idle _DSM function sets for different UUIDs.
Fixes: 073237281a ("ACPI: PM: s2idle: Enable Low-Power S0 Idle MSFT UUID for non-AMD systems")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218750
Reported-and-tested-by: Mark Pearson <mpearson@lenovo.com>
Suggested-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
It doesn't appear that the configuration is for the HFPLL is generic, so
add a qcs404-specific compatible and rename the existing struct to
qcs404.
Keep qcom,hfpll in the driver for compatibility with old dtbs.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20240218-hfpll-yaml-v2-2-31543e0d6261@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Convert the .txt documentation to .yaml with some adjustments.
* APQ8064/IPQ8064/MSM8960 compatibles are dropped since their HFPLLs are
a part of GCC so there is no need for a separate compat entry.
* Change the MSM8974 compatible to follow the updated naming schema.
Theis compatible is not used upstream yet.
* Add qcs404-hfpll. QCS404 currently uses qcom,hfpll. Mark that as
deprecated since every SoC appears to need different driver data so
"qcom,hfpll" makes no sense to keep
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240218-hfpll-yaml-v2-1-31543e0d6261@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the VBUS regulator used on Qualcomm platforms (RB1, RB2, RB5) to
supply VBUS voltage to the USB-C connector.
Reported-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240325-arm64-config-usb-vbus-v1-1-d14601f81d08@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Notice that the passive field in struct thermal_zone_device is not
used by the Power Allocator governor itself and so the ordering of
its updates with respect to allow_maximum_power() or allocate_power()
does not matter.
Accordingly, make power_allocator_manage() update that field right
before returning, which allows the current value of it to be passed
directly to allow_maximum_power() without using the additional update
variable that can be dropped.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
The Power Allocator governor really only wants to be called once per
thermal zone update and it does a special check to skip the extra,
from its perspective, invocations of the .throttle() callback.
Make it use .manage() instead of .throttle().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Introduce a new thermal governor callback called .manage() that will be
invoked once per thermal zone update after processing all of the trip
points in the core.
This will allow governors that look at multiple trip points together
to check all of them in a consistent configuration, so they don't need
to play tricks with skipping .throttle() invocations that they are not
interested in and they can avoid carrying out the same computations for
multiple times in one cycle.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Fold thermal_zone_trip_update() into bang_bang_control() which is the
only caller of it to reduce code size and make it easier to follow.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Do the following cleanups in thermal_zone_trip_update():
* Drop the useless "zero hysteresis" message.
* Eliminate the trip_index local variable that is redundant.
* Drop 2 comments that are not useful.
* Downgrade a diagnostic message from pr_warn() to pr_debug().
* Use consistent field formatting in diagnostic messages.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The Bang-Bang governor really is only concerned about trip point
crossing, so it can use the new .trip_crossed() callback instead of
.throttle() that is not particularly suitable for it.
Modify it to do so which also takes trip hysteresis into account, so the
governor does not need to use it directly any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
We still support GCC 8.x, and it appears that this toolchain
usually comes with an assembler that does not understand "pauth"
as a valid architectural extension.
This results in the NV ERETAx code breaking the build, as it relies
on this extention to make use of the PACGA instruction (required
by assemblers such as LLVM's).
Work around it by hand-assembling the instruction, which removes the
requirement for any assembler directive.
Fixes: 6ccc971ee2 ("KVM: arm64: nv: Add emulation for ERETAx instructions")
Reported-by: Linaro Kernel Functional Testing <lkft@linaro.org>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
More complex tests often have to spawn a background process,
like a server which will respond to requests or tcpdump.
Add support for creating such processes using the with keyword:
with bkg("my-daemon", ..):
# my-daemon is alive in this block
My initial thought was to add this support to cmd() directly
but it runs the command in the constructor, so by the time
we __enter__ it's too late to make sure we used "background=True".
Second useful helper transplanted from net_helper.sh is
wait_port_listen().
The test itself uses socat, which insists on v6 addresses
being wrapped in [], it's not the only command which requires
this format, so add the wrapped address to env. The hope
is to save test code from checking if address is v6.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While writing tests with a lot more cases I got tired of having
to jump back and forth to add the name of the test to the ksft_run()
list. Most unittest frameworks do some name matching, e.g. assume
that functions with names starting with test_ are test cases.
Support similar flow in ksft_run(). Let the author list the desired
prefixes. globals() need to be passed explicitly, IDK how to work
around that.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a very simple test for testing with a remote system.
Both IPv4 and IPv6 connectivity is optional, later change
will add checks to skip tests based on available addresses.
Using netdevsim:
$ ./run_kselftest.sh -t drivers/net:ping.py
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net: ping.py
# KTAP version 1
# 1..2
# ok 1 ping.test_v4
# ok 2 ping.test_v6
# # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
ok 1 selftests: drivers/net: ping.py
Command line SSH:
$ NETIF=virbr0 REMOTE_TYPE=ssh REMOTE_ARGS=root@192.168.122.123 \
LOCAL_V4=192.168.122.1 REMOTE_V4=192.168.122.123 \
./tools/testing/selftests/drivers/net/ping.py
KTAP version 1
1..2
ok 1 ping.test_v4
ok 2 ping.test_v6 # SKIP Test requires IPv6 connectivity
# Totals: pass:1 fail:0 xfail:1 xpass:0 skip:0 error:0
Existing devices placed in netns (and using net.config):
$ cat drivers/net/net.config
NETIF=veth0
REMOTE_TYPE=netns
REMOTE_ARGS=red
LOCAL_V4="192.168.1.1"
REMOTE_V4="192.168.1.2"
$ ./run_kselftest.sh -t drivers/net:ping.py
TAP version 13
1..1
# timeout set to 45
# selftests: drivers/net: ping.py
# KTAP version 1
# 1..2
# ok 1 ping.test_v4
# ok 2 ping.test_v6 # SKIP Test requires IPv6 connectivity
# # Totals: pass:1 fail:0 xfail:1 xpass:0 skip:0 error:0
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Nothing surprising here, hopefully. Wrap the variables from
the environment into a class or spawn a netdevsim based env
and pass it to the tests.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The tests with a remote end will use a different class,
for clarity, but will also need to parse the env.
So factor parsing the env out to a function.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Define the remote endpoint "model". To execute most meaningful device
driver tests we need to be able to communicate with a remote system,
and have it send traffic to the device under test.
Various test environments will have different requirements.
0) "Local" netdevsim-based testing can simply use net namespaces.
netdevsim supports connecting two devices now, to form a veth-like
construct.
1) Similarly on hosts with multiple NICs, the NICs may be connected
together with a loopback cable or internal device loopback.
One interface may be placed into separate netns, and tests
would proceed much like in the netdevsim case. Note that
the loopback config or the moving of one interface
into a netns is not expected to be part of selftest code.
2) Some systems may need to communicate with the remote endpoint
via SSH.
3) Last but not least environment may have its own custom communication
method.
Fundamentally we only need two operations:
- run a command remotely
- deploy a binary (if some tool we need is built as part of kselftests)
Wrap these two in a class. Use dynamic loading to load the Remote
class. This will allow very easy definition of other communication
methods without bothering upstream code base.
Stick to the "simple" / "no unnecessary abstractions" model for
referring to the remote endpoints. The host / remote object are
passed as an argument to the usual cmd() or ip() invocation.
For example:
ip("link show", json=True, host=remote)
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240420025237.3309296-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
netdev: support dumping a single netdev in qstats
I was writing a test for page pool which depended on qstats,
and got tired of having to filter dumps in user space.
Add support for dumping stats for a single netdev.
To get there we first need to add full support for extack
in dumps (and fix a dump error handling bug in YNL, sent
separately to the net tree).
====================
Link: https://lore.kernel.org/r/20240420023543.3300306-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a test for dumping qstats device by device.
ksft framework grows a ksft_raises() helper, to be used
under with, which should be familiar to unittest users.
Link: https://lore.kernel.org/r/20240420023543.3300306-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Note that when this commit message refers to netlink dump
it only means the actual dumping part, the parsing / dump
start is handled by the same code as "doit".
Commit 4a19edb60d ("netlink: Pass extack to dump handlers")
added support for returning extack messages from dump handlers,
but left out other extack info, e.g. bad attribute.
This used to be fine because until YNL we had little practical
use for the machine readable attributes, and only messages were
used in practice.
YNL flips the preference 180 degrees, it's now much more useful
to point to a bad attr with NL_SET_BAD_ATTR() than type
an English message saying "attribute XYZ is $reason-why-bad".
Support all of extack. The fact that extack only gets added if
it fits remains unaddressed.
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240420023543.3300306-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Having to filter the right ifindex in the tests is a bit tedious.
Add support for dumping qstats for a single ifindex.
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240420023543.3300306-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=PaAG
-----END PGP SIGNATURE-----
Merge tag '6.9-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- fscache fix
- fix for case where we could use uninitialized lease
- add tracepoint for debugging refcounting of tcon
- fix mount option regression (e.g. forceuid vs. noforceuid when uid=
specified) caused by conversion to the new mount API
* tag '6.9-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: reinstate original behavior again for forceuid/forcegid
smb: client: fix rename(2) regression against samba
cifs: Add tracing for the cifs_tcon struct refcounting
cifs: Fix reacquisition of volume cookie on still-live connection
Add support for parsing power-supplies binding so that fw_devlink can
enforce the dependency.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Cc: Sebastian Reichel <sre@kernel.org>
Link: https://lore.kernel.org/r/20240417200738.1370896-1-saravanak@google.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Squash warnings such as:
```
arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/apb@1e600000/watchdog@1e785000: failed to match any schema with compatible: ['aspeed,ast2400-wdt']
```
The schema binding additionally defines the clocks property over the
prose binding to align with use of the node in the DTS files.
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240403020439.418788-1-andrew@codeconstruct.com.au
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
