With zone write plugging enabled at the block layer level, any zone
device can only ever see at most a single write operation per zone.
There is thus no need to request a block scheduler with strick per-zone
sequential write ordering control through the ELEVATOR_F_ZBD_SEQ_WRITE
feature. Removing this allows using a zoned ublk device with any
scheduler, including "none".
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-15-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Set the request queue of a TYPE_ZBC device as needing zone append
emulation by setting the device queue max_zone_append_sectors limit to
0. This enables the block layer generic implementation provided by zone
write plugging. With this, the sd driver will never see a
REQ_OP_ZONE_APPEND request and the zone append emulation code
implemented in sd_zbc.c can be removed.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-14-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For targets requiring zone append operation emulation with regular
writes (e.g. dm-crypt), we can use the block layer emulation provided by
zone write plugging. Remove DM implemented zone append emulation and
enable the block layer one.
This is done by setting the max_zone_append_sectors limit of the
mapped device queue to 0 for mapped devices that have a target table
that cannot support native zone append operations (e.g. dm-crypt).
Such mapped devices are flagged with the DMF_EMULATE_ZONE_APPEND flag.
dm_split_and_process_bio() is modified to execute
blk_zone_write_plug_bio() for such device to let the block layer
transform zone append operations into regular writes. This is done
after ensuring that the submitted BIO is split if it straddles zone
boundaries. Both changes are implemented unsing the inline helpers
dm_zone_write_plug_bio() and dm_zone_bio_needs_split() respectively.
dm_revalidate_zones() is also modified to use the block layer provided
function blk_revalidate_disk_zones() so that all zone resources needed
for zone append emulation are initialized by the block layer without DM
core needing to do anything. Since the device table is not yet live when
dm_revalidate_zones() is executed, enabling the use of
blk_revalidate_disk_zones() requires adding a pointer to the device
table in struct mapped_device. This avoids errors in
dm_blk_report_zones() trying to get the table with dm_get_live_table().
The mapped device table pointer is set to the table passed as argument
to dm_revalidate_zones() before calling blk_revalidate_disk_zones() and
reset to NULL after this function returns to restore the live table
handling for user call of report zones.
All the code related to zone append emulation is removed from
dm-zone.c. This leads to simplifications of the functions __map_bio()
and dm_zone_endio(). This later function now only needs to deal with
completions of real zone append operations for targets that support it.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Mike Snitzer <snitzer@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-13-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for allowing BIO based device drivers to use zone write
plugging and its zone append emulation, allow these drivers to call
blk_revalidate_disk_zones() so that all zone resources necessary to zone
write plugging can be initialized.
To do so, remove the check in blk_revalidate_disk_zones() restricting
the use of this function to mq request-based drivers to allow also
BIO-based drivers to use it. This is safe to do as long as the
BIO-based block device queue is already setup and usable, as it should,
and can be safely frozen.
The helper function disk_need_zone_resources() is added to control the
allocation and initialization of the zone write plug hash table and
of the conventional zone bitmap only for mq devices and for BIO-based
devices that require zone append emulation.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-12-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Given that zone write plugging manages all writes to zones of a zoned
block device and tracks the write pointer position of all zones that are
not full nor empty, emulating zone append operations using regular
writes can be implemented generically, without relying on the underlying
device driver to implement such emulation. This is needed for devices
that do not natively support the zone append command (e.g. SMR
hard-disks).
A device may request zone append emulation by setting its
max_zone_append_sectors queue limit to 0. For such device, the function
blk_zone_wplug_prepare_bio() changes zone append BIOs into
non-mergeable regular write BIOs. Modified zone append BIOs are flagged
with the new BIO flag BIO_EMULATES_ZONE_APPEND. This flag is checked
on completion of the BIO in blk_zone_write_plug_bio_endio() to restore
the original REQ_OP_ZONE_APPEND operation code of the BIO.
The block layer internal inline helper function bio_is_zone_append() is
added to test if a BIO is either a native zone append operation
(REQ_OP_ZONE_APPEND operation code) or if it is flagged with
BIO_EMULATES_ZONE_APPEND. Given that both native and emulated zone
append BIO completion handling should be similar, The functions
blk_update_request() and blk_zone_complete_request_bio() are modified to
use bio_is_zone_append() to execute blk_zone_update_request_bio() for
both native and emulated zone append operations.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-11-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for adding a generic zone append emulation using zone
write plugging, allow device drivers supporting zoned block device to
set a the max_zone_append_sectors queue limit of a device to 0 to
indicate the lack of native support for zone append operations and that
the block layer should emulate these operations using regular write
operations.
blk_queue_max_zone_append_sectors() is modified to allow passing 0 as
the max_zone_append_sectors argument. The function
queue_max_zone_append_sectors() is also modified to ensure that the
minimum of the max_hw_sectors and chunk_sectors limit is used whenever
the max_zone_append_sectors limit is 0. This minimum is consistent with
the value set for the max_zone_append_sectors limit by the function
blk_validate_zoned_limits() when limits for a queue are validated.
The helper functions queue_emulates_zone_append() and
bdev_emulates_zone_append() are added to test if a queue (or block
device) emulates zone append operations.
In order for blk_revalidate_disk_zones() to accept zoned block devices
relying on zone append emulation, the direct check to the
max_zone_append_sectors queue limit of the disk is replaced by a check
using the value returned by queue_max_zone_append_sectors(). Similarly,
queue_zone_append_max_show() is modified to use the same accessor so
that the sysfs attribute advertizes the non-zero limit that will be
used, regardless if it is for native or emulated commands.
For stacking drivers, a top device should not need to care if the
underlying devices have native or emulated zone append operations.
blk_stack_limits() is thus modified to set the top device
max_zone_append_sectors limit using the new accessor
queue_limits_max_zone_append_sectors(). queue_max_zone_append_sectors()
is modified to use this function as well. Stacking drivers that require
zone append emulation, e.g. dm-crypt, can still request this feature by
calling blk_queue_max_zone_append_sectors() with a 0 limit.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-10-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For a zoned block device that has no limit on the number of open zones
and no limit on the number of active zones, the zone write plug mempool
is created with a size of 128 zone write plugs. For such case, set the
device max_open_zones queue limit to this value to indicate to the user
the potential performance penalty that may happen when writing
simultaneously to more zones than the mempool size.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240408014128.205141-9-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Zone write plugging implements a per-zone "plug" for write operations
to control the submission and execution order of write operations to
sequential write required zones of a zoned block device. Per-zone
plugging guarantees that at any time there is at most only one write
request per zone being executed. This mechanism is intended to replace
zone write locking which implements a similar per-zone write throttling
at the scheduler level, but is implemented only by mq-deadline.
Unlike zone write locking which operates on requests, zone write
plugging operates on BIOs. A zone write plug is simply a BIO list that
is atomically manipulated using a spinlock and a kblockd submission
work. A write BIO to a zone is "plugged" to delay its execution if a
write BIO for the same zone was already issued, that is, if a write
request for the same zone is being executed. The next plugged BIO is
unplugged and issued once the write request completes.
This mechanism allows to:
- Untangle zone write ordering from block IO schedulers. This allows
removing the restriction on using mq-deadline for writing to zoned
block devices. Any block IO scheduler, including "none" can be used.
- Zone write plugging operates on BIOs instead of requests. Plugged
BIOs waiting for execution thus do not hold scheduling tags and thus
are not preventing other BIOs from executing (reads or writes to
other zones). Depending on the workload, this can significantly
improve the device use (higher queue depth operation) and
performance.
- Both blk-mq (request based) zoned devices and BIO-based zoned devices
(e.g. device mapper) can use zone write plugging. It is mandatory
for the former but optional for the latter. BIO-based drivers can
use zone write plugging to implement write ordering guarantees, or
the drivers can implement their own if needed.
- The code is less invasive in the block layer and is mostly limited to
blk-zoned.c with some small changes in blk-mq.c, blk-merge.c and
bio.c.
Zone write plugging is implemented using struct blk_zone_wplug. This
structure includes a spinlock, a BIO list and a work structure to
handle the submission of plugged BIOs. Zone write plugs structures are
managed using a per-disk hash table.
Plugging of zone write BIOs is done using the function
blk_zone_write_plug_bio() which returns false if a BIO execution does
not need to be delayed and true otherwise. This function is called
from blk_mq_submit_bio() after a BIO is split to avoid large BIOs
spanning multiple zones which would cause mishandling of zone write
plugs. This ichange enables by default zone write plugging for any mq
request-based block device. BIO-based device drivers can also use zone
write plugging by expliclty calling blk_zone_write_plug_bio() in their
->submit_bio method. For such devices, the driver must ensure that a
BIO passed to blk_zone_write_plug_bio() is already split and not
straddling zone boundaries.
Only write and write zeroes BIOs are plugged. Zone write plugging does
not introduce any significant overhead for other operations. A BIO that
is being handled through zone write plugging is flagged using the new
BIO flag BIO_ZONE_WRITE_PLUGGING. A request handling a BIO flagged with
this new flag is flagged with the new RQF_ZONE_WRITE_PLUGGING flag.
The completion of BIOs and requests flagged trigger respectively calls
to the functions blk_zone_write_bio_endio() and
blk_zone_write_complete_request(). The latter function is used to
trigger submission of the next plugged BIO using the zone plug work.
blk_zone_write_bio_endio() does the same for BIO-based devices.
This ensures that at any time, at most one request (blk-mq devices) or
one BIO (BIO-based devices) is being executed for any zone. The
handling of zone write plugs using a per-zone plug spinlock maximizes
parallelism and device usage by allowing multiple zones to be writen
simultaneously without lock contention.
Zone write plugging ignores flush BIOs without data. Hovever, any flush
BIO that has data is always plugged so that the write part of the flush
sequence is serialized with other regular writes.
Given that any BIO handled through zone write plugging will be the only
BIO in flight for the target zone when it is executed, the unplugging
and submission of a BIO will have no chance of successfully merging with
plugged requests or requests in the scheduler. To overcome this
potential performance degradation, blk_mq_submit_bio() calls the
function blk_zone_write_plug_attempt_merge() to try to merge other
plugged BIOs with the one just unplugged and submitted. Successful
merging is signaled using blk_zone_write_plug_bio_merged(), called from
bio_attempt_back_merge(). Furthermore, to avoid recalculating the number
of segments of plugged BIOs to attempt merging, the number of segments
of a plugged BIO is saved using the new struct bio field
__bi_nr_segments. To avoid growing the size of struct bio, this field is
added as a union with the bio_cookie field. This is safe to do as
polling is always disabled for plugged BIOs.
When BIOs are plugged in a zone write plug, the device request queue
usage counter is always incremented. This reference is kept and reused
for blk-mq devices when the plugged BIO is unplugged and submitted
again using submit_bio_noacct_nocheck(). For this case, the unplugged
BIO is already flagged with BIO_ZONE_WRITE_PLUGGING and
blk_mq_submit_bio() proceeds directly to allocating a new request for
the BIO, re-using the usage reference count taken when the BIO was
plugged. This extra reference count is dropped in
blk_zone_write_plug_attempt_merge() for any plugged BIO that is
successfully merged. Given that BIO-based devices will not take this
path, the extra reference is dropped after a plugged BIO is unplugged
and submitted.
Zone write plugs are dynamically allocated and managed using a hash
table (an array of struct hlist_head) with RCU protection.
A zone write plug is allocated when a write BIO is received for the
zone and not freed until the zone is fully written, reset or finished.
To detect when a zone write plug can be freed, the write state of each
zone is tracked using a write pointer offset which corresponds to the
offset of a zone write pointer relative to the zone start. Write
operations always increment this write pointer offset. Zone reset
operations set it to 0 and zone finish operations set it to the zone
size.
If a write error happens, the wp_offset value of a zone write plug may
become incorrect and out of sync with the device managed write pointer.
This is handled using the zone write plug flag BLK_ZONE_WPLUG_ERROR.
The function blk_zone_wplug_handle_error() is called from the new disk
zone write plug work when this flag is set. This function executes a
report zone to update the zone write pointer offset to the current
value as indicated by the device. The disk zone write plug work is
scheduled whenever a BIO flagged with BIO_ZONE_WRITE_PLUGGING completes
with an error or when bio_zone_wplug_prepare_bio() detects an unaligned
write. Once scheduled, the disk zone write plugs work keeps running
until all zone errors are handled.
To match the new data structures used for zoned disks, the function
disk_free_zone_bitmaps() is renamed to the more generic
disk_free_zone_resources(). The function disk_init_zone_resources() is
also introduced to initialize zone write plugs resources when a gendisk
is allocated.
In order to guarantee that the user can simultaneously write up to a
number of zones equal to a device max active zone limit or max open zone
limit, zone write plugs are allocated using a mempool sized to the
maximum of these 2 device limits. For a device that does not have
active and open zone limits, 128 is used as the default mempool size.
If a change to the device active and open zone limits is detected, the
disk mempool is resized when blk_revalidate_disk_zones() is executed.
This commit contains contributions from Christoph Hellwig <hch@lst.de>.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20240408014128.205141-8-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In preparation for adding zone write plugging, modify
blk_revalidate_disk_zones() to get the capacity of zones of a zoned
block device. This capacity value as a number of 512B sectors is stored
in the gendisk zone_capacity field.
Given that host-managed SMR disks (including zoned UFS drives) and all
known NVMe ZNS devices have the same zone capacity for all zones
blk_revalidate_disk_zones() returns an error if different capacities are
detected for different zones.
This also adds check to verify that the values reported by the device
for zone capacities are correct, that is, that the zone capacity is
never 0, does not exceed the zone size and is equal to the zone size for
conventional zones.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240408014128.205141-7-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove "static" from the definition of bio_attempt_back_merge() and
declare this function in block/blk.h to allow using it internally from
other block layer files. The definition of enum bio_merge_status is
also moved to block/blk.h.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240408014128.205141-6-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Implement the inline helper functions bio_straddles_zones() and
bio_offset_from_zone_start() to respectively test if a BIO crosses a
zone boundary (the start sector and last sector belong to different
zones) and to obtain the offset of a BIO from the start sector of its
target zone.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240408014128.205141-5-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On completion of a zone append request, the request sector indicates the
location of the written data. This value must be returned to the user
through the BIO iter sector. This is done in 2 places: in
blk_complete_request() and in blk_update_request(). Introduce the inline
helper function blk_zone_update_request_bio() to avoid duplicating
this BIO update for zone append requests, and to compile out this
helper call when CONFIG_BLK_DEV_ZONED is not enabled.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240408014128.205141-4-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Moving req_bio_endio() code into its only caller, blk_update_request(),
allows reducing accesses to and tests of bio and request fields. Also,
given that partial completions of zone append operations is not
possible and that zone append operations cannot be merged, the update
of the BIO sector using the request sector for these operations can be
moved directly before the call to bio_endio().
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240408014128.205141-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On completion of a flush sequence, blk_flush_restore_request() restores
the bio of a request to the original submitted BIO. However, the last
use of the request in the flush sequence may have been for a POSTFLUSH
which does not have a sector. So make sure to restore the request sector
using the iter sector of the original BIO. This BIO has not changed yet
since the completions of the flush sequence intermediate steps use
requeueing of the request until all steps are completed.
Restoring the request sector ensures that blk_mq_end_request() will see
a valid sector as originally set when the flush BIO was submitted.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Tested-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20240408014128.205141-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The newly added driver causes a warning about missing dependencies
by selecting CONFIG_TYPEC unconditionally:
WARNING: unmet direct dependencies detected for TYPEC
Depends on [n]: USB_SUPPORT [=n]
Selected by [y]:
- PHY_ROCKCHIP_USBDP [=y] && ARCH_ROCKCHIP [=y] && OF [=y]
WARNING: unmet direct dependencies detected for USB_COMMON
Depends on [n]: USB_SUPPORT [=n]
Selected by [y]:
- EXTCON_RTK_TYPE_C [=y] && EXTCON [=y] && (ARCH_REALTEK [=y] || COMPILE_TEST [=y]) && TYPEC [=y]
Since that is a user-visible option, it should not really be selected
in the first place. Replace the 'select' with a 'depends on' as
we have for similar drivers.
Fixes: 2f70bbddeb ("phy: rockchip: add usbdp combo phy driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240415174241.77982-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The ret variable may not be initialized in rk_udphy_usb3_phy_init(), if
the PHY is not using USB3 mode.
Since the DisplayPort part is handled separately and the PHY does not
support USB2 (which is routed to another PHY on Rockchip RK3588), the
right exit code for this case is 0. Thus let's initialize the variable
accordingly.
Fixes: 2f70bbddeb ("phy: rockchip: add usbdp combo phy driver")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202404141048.qFAYDctQ-lkp@intel.com/
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240416145233.94687-1-sebastian.reichel@collabora.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
next_work is only used to make the work visible for
cancellation. Instead, we can just directly write to cur_work before
dropping the acct_lock and avoid the extra hop.
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20240416021054.3940-3-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Commit 361aee450c ("io-wq: add intermediate work step between pending
list and active work") closed a race between a cancellation and the work
being removed from the wq for execution. To ensure the request is
always reachable by the cancellation, we need to move it within the wq
lock, which also synchronizes the cancellation. But commit
42abc95f05 ("io-wq: decouple work_list protection from the big
wqe->lock") replaced the wq lock here and accidentally reintroduced the
race by releasing the acct_lock too early.
In other words:
worker | cancellation
work = io_get_next_work() |
raw_spin_unlock(&acct->lock); |
|
| io_acct_cancel_pending_work
| io_wq_worker_cancel()
worker->next_work = work
Using acct_lock is still enough since we synchronize on it on
io_acct_cancel_pending_work.
Fixes: 42abc95f05 ("io-wq: decouple work_list protection from the big wqe->lock")
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Link: https://lore.kernel.org/r/20240416021054.3940-2-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
For some reason the snps/cx0 PLL states were added into
a union alongside dpll_hw_state. Just suck them into
dpll_hw_state so that we don't have so many levels of
unions/etc.
TODO: Get rid of 'clock' from the snps/cx0 PLL states
as it is not a register values and thus doesn't
belong there
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-19-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
BIOS 03.05 still hasn't fixed the spurious IRQ1 issue. As it's still
being worked on there is still a possibility that it won't need to
apply to future BIOS releases.
Add a quirk for BIOS 03.05 as well.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240410141046.433-1-mario.limonciello@amd.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
intel_dpll_hw_state contains space for all possible PLL
register values across all platforms. That is rather wasteful
as each machine only needs to store the registers values
that are appropriate for the platform.
Turn intel_dpll_hw_state into a union so that we don't
waste memory for the register values of other platforms.
And let's use an anonymous union so that we don't have
to do tons of s/struct/union/ all over the place.
pahole:
struct intel_dpll_hw_state {
- struct i9xx_dpll_hw_state i9xx; /* 0 16 */
- struct hsw_dpll_hw_state hsw; /* 16 8 */
- struct skl_dpll_hw_state skl; /* 24 12 */
- struct bxt_dpll_hw_state bxt; /* 36 44 */
- /* --- cacheline 1 boundary (64 bytes) was 16 bytes ago --- */
- struct icl_dpll_hw_state icl; /* 80 60 */
+ union {
+ struct i9xx_dpll_hw_state i9xx; /* 0 16 */
+ struct hsw_dpll_hw_state hsw; /* 0 8 */
+ struct skl_dpll_hw_state skl; /* 0 12 */
+ struct bxt_dpll_hw_state bxt; /* 0 44 */
+ struct icl_dpll_hw_state icl; /* 0 60 */
+ }; /* 0 60 */
- /* size: 140, cachelines: 3, members: 5 */
- /* last cacheline: 12 bytes */
+ /* size: 60, cachelines: 1, members: 1 */
+ /* last cacheline: 60 bytes */
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-18-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
struct intel_dpll_hw_state has a spot for all possible
PLL registers across all platforms (well, apart from
cx0/snps). This makes it rather confusing when trying to
figure out which members belong to which platform(s).
Split the struct up into five different platform specific
sub-structures. For now this will actually increase the size
a little bit as we have to duplicate a few members from
skl to icl, but that will be remedied soon when we turn
the thing into a union.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-17-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Use devm_add_action_or_reset() rather than manually cleaning up on the
error path.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240417093026.79396-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The patch which fixed the missing remove_late() calls missed a case
when sof_select_ipc_and_paths() could return with error and in this
case sof_init_environment() would just return with 0.
Do not ignore the error code returned by sof_select_ipc_and_paths().
Fixes: 90f8917e7a ("ASoC: SOF: Core: Add remove_late() to sof_init_environment failure path")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240417075804.10829-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The *_compute_dpll() functions generally contain
two things:
- huge pile of inline code to calculate the DPLL
register value
- a few calls to helpers to calculate the
DPLL_MD and FP register values
Pull the DPLL register value calculations into a helpers
as well, so that *_compute_dpll() can focus on higher
level tasks.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-11-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Stop rummaging around inside pll->state directly in the low
level pll->enable() functions, and instead let the higher level
code figure out where the correct state is stored and pass it in.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-9-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Spinkle local PLL hw_state variables into various low
level PLL functions. Will make subsequent changes cleaner
when we don't have to touch so many places when renaming
struct members and whatnot.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-5-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
We have zero consistency in out PLL state naming scheme. Try
to unify things a bit by using 'dpll_hw_state' for high level
stuff and just 'hw_state' for low level stuff. Currently both
are the same, but I want to unionize intel_dpll_hw_state at
which point using different names can make it more clear whether
we're talking about the whole union or just the embedded platform
specific struct.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240412182703.19916-4-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
When dumping a character array, libbpf will watch for a '\0' and set
is_array_terminated=true if found. This prevents libbpf from printing
the remaining characters of the array, treating it as a nul-terminated
string.
However, once this flag is set, it's never reset, leading to subsequent
characters array not being printed properly:
.str_multi = (__u8[2][16])[
[
'H',
'e',
'l',
],
],
This patch saves the is_array_terminated flag and restores its
default (false) value before looping over the elements of an array,
then restores it afterward. This way, libbpf's behavior is unchanged
when dumping the characters of an array, but subsequent arrays are
printed properly:
.str_multi = (__u8[2][16])[
[
'H',
'e',
'l',
],
[
'l',
'o',
],
],
Signed-off-by: Quentin Deslandes <qde@naccy.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240413211258.134421-3-qde@naccy.de
In btf_dump_array_data(), libbpf will call btf_dump_dump_type_data() for
each element. For an array of characters, each element will be
processed the following way:
- btf_dump_dump_type_data() is called to print the character
- btf_dump_data_pfx() prefixes the current line with the proper number
of indentations
- btf_dump_int_data() is called to print the character
- After the last character is printed, btf_dump_dump_type_data() calls
btf_dump_data_pfx() before writing the closing bracket
However, for an array containing characters, btf_dump_int_data() won't
print any '\0' and subsequent characters. This leads to situations where
the line prefix is written, no character is added, then the prefix is
written again before adding the closing bracket:
(struct sk_metadata){
.str_array = (__u8[14])[
'H',
'e',
'l',
'l',
'o',
],
This change solves this issue by printing the '\0' character, which
has two benefits:
- The bracket closing the array is properly aligned
- It's clear from a user point of view that libbpf uses '\0' as a
terminator for arrays of characters.
Signed-off-by: Quentin Deslandes <qde@naccy.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240413211258.134421-2-qde@naccy.de
