This version brings along following fixes:
* Expand dmub_cmd operations.
* Update DVI configuration.
* Modify power sequence.
* Enable Z10 flag for IPS.
* Multiple code cleanups.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add some missing registers expansion in the dcn201_link_encoder file.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fill ring buffer before offload.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit remove some unused code and also rename one of the define.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why] Update FMT_CONTROL settings based on HW spec
[How] Update FMT settings for 4:2:0
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES internally has a timeout allowance of 2 seconds.
Increase driver timeout to 3 seconds to be safe.
Signed-off-by: Jonathan Kim <Jonathan.Kim@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In commit 18ff0bcda6 ("ethtool: add interface to interact with Ethernet
Power Equipment"), the 'pse_control_config' structure was introduced,
housing a single member labeled 'admin_cotrol' responsible for maintaining
the operational state of the PoDL PSE functions.
A noticeable typographical error exists in the naming of this field
('cotrol' should be corrected to 'control'), which this commit aims to
rectify.
Furthermore, with upcoming extensions of this structure to encompass PoE
functionalities, the field is being renamed to 'podl_admin_state' to
distinctly indicate that this state is tailored specifically for PoDL."
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240414-feature_poe-v8-3-e4bf1e860da5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This allows fw_devlink to create device links between consumers of
a PSE and the supplier of the PSE.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://lore.kernel.org/r/20240414-feature_poe-v8-2-e4bf1e860da5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Oleksij was the first to add support for pse-pd net subsystem.
Add himself to the maintainers seems logical.
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240414-feature_poe-v8-1-e4bf1e860da5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Real driver testing will obviously require enabling more
options, but will require more manual setup in the first
place. For CIs running purely software tests we need
to enable netdevsim.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240416004556.1618804-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ping prints all the info to stdout. To make debug easier capture
stdout in the Exception raised when command unexpectedly fails.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20240416004556.1618804-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This commit groups many parts of the code that are redundant or not used
and drops all of them.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit updates some comments to be more precise and adds another
small comment to some other parts to improve the code readability.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This include is not used and can lead to circular dependencies.
Signed-off-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240312-fencei-v13-1-4b6bdc2bbf32@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
For now, we use stop_machine() to patch the text and when we use IPIs for
remote icache flushes (which is emitted in patch_text_nosync()), the system
hangs.
So instead, make sure every CPU executes the stop_machine() patching
function and emit a local icache flush there.
Co-developed-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240229121056.203419-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
This memory barrier is not needed and not documented so simply remove
it.
Suggested-by: Andrea Parri <andrea@rivosinc.com>
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Link: https://lore.kernel.org/r/20240229121056.203419-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the scl_data.format to be close to other similar parts.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Driver was passing a wrong command version which to DMCUB which caused
the DMCUB to treat it as 0, so it wouldn't support dual eDP and would
override the panel index to 0 instead of choosing between 0/1.
[how]
Use DMUB_CMD_PSR_CONTROL_VERSION_1 instead of PSR_VERSION_1.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The previous assumption that there will be an optimize_bandwidth call
following every prepare_bandwidth call was incorrect and caused small
inaccuracies in logging, as some info was only updated in later prepare
calls.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Ethan Bitnun <Ethan.Bitnun@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update headers by removing two unecessary headers and include a new one.
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The chip ID DEVICE_ID_NV_13FE is not meaningful and represents a legacy
way of dealing with chip ID. This commit uses dc_version instead of
chip_id and also DCN_VERSION_2_01 instead of DEVICE_ID_NV_13FE.
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit b5abd7f983.
This change breaks DSC on 4k monitors at 144Hz over USB-C.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3254
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Muhammad Ahmed <ahmed.ahmed@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Charlene Liu <charlene.liu@amd.com>
Cc: Hamza Mahfooz <hamza.mahfooz@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Update dmub_cmd to manipulate SDP control in replay FSM, add command
for panel_cntl, expand link rate enum, and increase the reserve byte.
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Anthony Koo <anthony.koo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add vbios version in the devcoredump along with formatting
the information with proper alignment.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Need to take the srbm_mutex and while we are here, use the
helper function soc21_grbm_select();
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rework part of the modifications made to the power sequence and resource
allocation logic.
Reviewed-by: Xi (Alex) Liu <xi.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
IPS FSM requires Z10 flag to be enabled to do save and restore the
registers properly.
[how]
Enable Z10 and use the correct function to determine Z10 capability
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Pointer initialization and assignment for dml2_options is not done
correctly. While this works for some compilers, others give an error.
[How]
Modify dc_state_create code to correctly initialize the dml2_opt pointer
and pass it to dml2_create. Also update the code with correct derefrence
operations.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
IPS ono sequence ordering differs based on the ASIC.
[How]
Detect the ASIC ID revision and set the boot option accordingly. Feed
it through the DCN35 DMUB functions.
Reviewed-by: Sung joon Kim <sungjoon.kim@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Adding support for chroma subsampling offset (cositing) in scaler
calculations to adjust reference point where we determine post-scaling
chroma value in YUV420 surfaces.
[How]
Add support for cositing options: NONE, LEFT and TOPLEFT Add debug
option force_cositing and set default to TOPLEFT to maintain same
behaviour as without offset support.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Limit the code change for ips enable to reduce the impact for now. Also
exit_ips first before dc_power_down to avoid 0x9f.
Reviewed-by: Chris Park <chris.park@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
To reduce the complexity of pipe resource allocation for different
use-cases, now we search for any free pipe sequentially rather than from
bottom up.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Rodrigo Siqueira <rodrigo.siqueira@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add ref: dai-common.yaml to fix below warning.
arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dtb: esai@2024000: Unevaluated properties are not allowed ('#sound-dai-cells' was unexpected)
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240416-esai_arm_dts_warning-v2-2-879e59c0c3b8@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fsl,fifo-depth have default value 64 in driver(sound/soc/fsl/fsl_esai.c).
fsl,esai-synchronous is flag(bool) type. It doesn't make sense to put flag
type into 'required'.
Fix warning:
arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dtb: esai@2024000: 'fsl,fifo-depth' is a required property
arch/arm/boot/dts/nxp/imx/imx6q-sabreauto.dtb: esai@2024000: 'fsl,esai-synchronous' is a required property
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240416-esai_arm_dts_warning-v2-1-879e59c0c3b8@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Allow nvmem-cells and nvmem-cell-names to get mac_address from onchip
fuse.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240415103621.1644735-1-peng.fan@oss.nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The print function dev_err() is redundant because
platform_get_irq_byname() already prints an error.
./drivers/net/ipa/ipa_interrupt.c:300:2-9: line 300 is redundant because platform_get_irq() already prints an error.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8756
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240415031456.10805-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The variable is being assigned an value and then is being re-assigned
a new value in the next statement. The assignment is redundant and can
be removed.
Cleans up clang scan build warning:
net/handshake/tlshd.c:216:2: warning: Value stored to 'ret' is never
read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20240415100713.483399-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vhost_worker will call tun call backs to receive packets. If too many
illegal packets arrives, tun_do_read will keep dumping packet contents.
When console is enabled, it will costs much more cpu time to dump
packet and soft lockup will be detected.
net_ratelimit mechanism can be used to limit the dumping rate.
PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980"
#0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253
#1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3
#2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e
#3 [fffffe00003fced0] do_nmi at ffffffff8922660d
#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663
[exception RIP: io_serial_in+20]
RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002
RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000
RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0
RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f
R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020
R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#5 [ffffa655314979e8] io_serial_in at ffffffff89792594
#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470
#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6
#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605
#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558
#10 [ffffa65531497ac8] console_unlock at ffffffff89316124
#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07
#12 [ffffa65531497b68] printk at ffffffff89318306
#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765
#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun]
#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun]
#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net]
#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost]
#18 [ffffa65531497f10] kthread at ffffffff892d2e72
#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f
Fixes: ef3db4a595 ("tun: avoid BUG, dump packet on GSO errors")
Signed-off-by: Lei Chen <lei.chen@smartx.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for SPI driver. Having another MODULE_ALIAS causes
the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154929.127045-1-krzk@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
In some cs42l43 systems a couple of cs35l56 amplifiers are attached
to the cs42l43's SPI and I2S. On Windows the cs42l43 is controlled
by a SDCA class driver and these two amplifiers are controlled by
firmware running on the cs42l43. However, under Linux the decision
was made to interact with the cs42l43 directly, affording the user
greater control over the audio system. However, this has resulted
in an issue where these two bridged cs35l56 amplifiers are not
populated in ACPI and must be added manually. There is at least an
SDCA extension unit DT entry we can key off.
The process of adding this is handled using a software node, firstly the
ability to add native chip selects to software nodes must be added.
Secondly, an additional flag for naming the SPI devices is added this
allows the machine driver to key to the correct amplifier. Then finally,
the cs42l43 SPI driver adds the two amplifiers directly onto its SPI
bus.
An additional series will follow soon to add the audio machine driver
parts (in the sof-sdw driver), however that is fairly orthogonal to
this part of the process, getting the actual amplifiers registered.
Merge series from AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>:
Changes in v5:
- Cleaned up MT8186 soundcard migration commit which erroneously
had leftovers from development
- Changed the mtk_pcm_constraints_data structure to hold pointers
to snd_pcm_hw_constraint_list, as to really reuse the const data
- Tested again on all of the listed MTK platforms.
Changes in v4:
- Rebased over next-20240409
- Dropped the first 4 patches from v3 as were already picked by Mark
- Fixed W=1 build issue
Changes in v3:
- Added audio-routing names in enum in all yaml files
- Added mention of disallowing old and new properties together in
commit message of bindings patches
- Fixed validation errors with sound-card-common.yaml inclusion
due to missing model property in examples
- Removed `else` enforcing headset-codec/speaker-codecs requirement
if xxx-dai-link not present to avoid future commit noise as the
deprecated statement will disallow deprecated properties as required
Changes in v2:
- Bindings: Changed link-name/codec/clk-provider to remove `items`
and leave just the enum
- Moved .*-dai-link pattern additionalProperties after `type: object`
- Added ref to sound-card-common.yaml
- Fixed dai-link-xxx -> xxx-dai-link typo in example comment
This series performs a cleanup of most of the MediaTek AFE drivers and
soundcard machine drivers, reducing code duplication and setting a base
to be consistent with their devicetree bindings, as many of those are
using different properties and nodes for no good reason.
Summarizing:
- Commonizes functions and ops where possible
- Adds a common probe mechanism, increasing maintainability of
soundcard drivers for older MediaTek SoCs
- Migrates all drivers to support the new bindings
- Obviously retains compatibility with old device trees
- Reduces machine-specific parameters hardcoding in drivers
- Can now set machine-specific params in device tree
- Uses the `audio-routing` and `dai-link` nodes like some
other non-MediaTek SoC sound drivers
- Imposes consistency between MediaTek ASoC machine soundcard
drivers bindings
- Reduces code size and greatly reduces the amount of code that
will be required for newer drivers (retaining compatibility with
the old bindings was costly in terms of code size, otherwise
this series would've removed ~1000 more lines, or something
along that line).
This series was (manually) tested on MT8173, MT8192, MT8195 and MT8186
Chromebooks.
AngeloGioacchino Del Regno (18):
ASoC: mediatek: Add common machine soundcard driver probe mechanism
ASoC: mediatek: common: Constify struct mtk_sof_priv
ASoC: mediatek: mt8188: Migrate to mtk_soundcard_common_probe
ASoC: mediatek: mt8195: Migrate to mtk_soundcard_common_probe
ASoC: mediatek: mt8192: Migrate to mtk_soundcard_common_probe
ASoC: mediatek: mt8186: Migrate to mtk_soundcard_common_probe
ASoC: mediatek: Add common snd_soc_ops .startup() callback
ASoC: mediatek: mt8195: Migrate to the common mtk_soundcard_startup
ASoC: mediatek: mt8192: Migrate to the common mtk_soundcard_startup
ASoC: mediatek: mt8186-rt1019: Migrate to the common
mtk_soundcard_startup
ASoC: mediatek: Add common mtk_afe_component_probe callback
ASoC: mediatek: Use common mtk_afe_pcm_platform with common probe cb
ASoC: mediatek: mt8186: Unify mt8186-mt6366 machine drivers
ASoC: dt-bindings: mt8195: Document audio-routing and dai-link subnode
ASoC: dt-bindings: mt8192: Document audio-routing and dai-link subnode
ASoC: dt-bindings: mt8186: Document audio-routing and dai-link subnode
arm64: dts: mediatek: mt8195-cherry: Specify sound DAI links and
routing
arm64: dts: mediatek: mt8186-corsola: Specify sound DAI links and
routing
.../sound/mt8186-mt6366-da7219-max98357.yaml | 131 +-
.../sound/mt8186-mt6366-rt1019-rt5682s.yaml | 120 +-
.../sound/mt8192-mt6359-rt1015-rt5682.yaml | 139 +-
.../bindings/sound/mt8195-mt6359.yaml | 134 ++
.../boot/dts/mediatek/mt8186-corsola.dtsi | 42 +-
.../boot/dts/mediatek/mt8195-cherry.dtsi | 45 +
sound/soc/mediatek/Kconfig | 24 +-
.../mediatek/common/mtk-afe-platform-driver.c | 18 +
.../soc/mediatek/common/mtk-dsp-sof-common.c | 15 +-
.../soc/mediatek/common/mtk-dsp-sof-common.h | 1 -
sound/soc/mediatek/common/mtk-soc-card.h | 7 +-
.../mediatek/common/mtk-soundcard-driver.c | 199 +++
.../mediatek/common/mtk-soundcard-driver.h | 42 +
sound/soc/mediatek/mt6797/mt6797-afe-pcm.c | 14 +-
sound/soc/mediatek/mt7986/mt7986-afe-pcm.c | 14 +-
sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 14 +-
sound/soc/mediatek/mt8186/Makefile | 3 +-
.../mt8186/mt8186-mt6366-da7219-max98357.c | 1189 -----------------
...t6366-rt1019-rt5682s.c => mt8186-mt6366.c} | 578 ++++----
sound/soc/mediatek/mt8188/mt8188-afe-pcm.c | 21 +-
sound/soc/mediatek/mt8188/mt8188-mt6359.c | 203 +--
sound/soc/mediatek/mt8192/mt8192-afe-pcm.c | 25 +-
.../mt8192/mt8192-mt6359-rt1015-rt5682.c | 301 ++---
sound/soc/mediatek/mt8195/mt8195-afe-pcm.c | 21 +-
sound/soc/mediatek/mt8195/mt8195-mt6359.c | 487 +++----
25 files changed, 1597 insertions(+), 2190 deletions(-)
delete mode 100644 sound/soc/mediatek/mt8186/mt8186-mt6366-da7219-max98357.c
rename sound/soc/mediatek/mt8186/{mt8186-mt6366-rt1019-rt5682s.c => mt8186-mt6366.c} (72%)
--
2.44.0
The ID table already has respective entry and MODULE_DEVICE_TABLE and
creates proper alias for SPI driver. Having another MODULE_ALIAS causes
the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20240414154910.126991-1-krzk@kernel.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
This fixes a deadlock when journal replay has many keys to insert that
were from fsck, not the journal.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
