When dma_alloc_coherent() fails in hns_roce_alloc_hem(), just call
kfree() to release hem instead of hns_roce_free_hem().
Fixes: c00743cbf2 ("RDMA/hns: Simplify 'struct hns_roce_hem' allocation")
Signed-off-by: wenglianfa <wenglianfa@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240412091616.370789-7-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The refcount of CQ is not protected by locks. When CQ asynchronous
events and CQ destruction are concurrent, CQ may have been released,
which will cause UAF.
Use the xa_lock() to protect the CQ refcount.
Fixes: 9a4435375c ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Junxian Huang <huangjunxian6@hisilicon.com>
Link: https://lore.kernel.org/r/20240412091616.370789-6-huangjunxian6@hisilicon.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Many architectures' switch_mm() (e.g. arm64) do not have an smp_mb()
which the core scheduler code has depended upon since commit:
commit 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
If switch_mm() doesn't call smp_mb(), sched_mm_cid_remote_clear() can
unset the actively used cid when it fails to observe active task after it
sets lazy_put.
There *is* a memory barrier between storing to rq->curr and _return to
userspace_ (as required by membarrier), but the rseq mm_cid has stricter
requirements: the barrier needs to be issued between store to rq->curr
and switch_mm_cid(), which happens earlier than:
- spin_unlock(),
- switch_to().
So it's fine when the architecture switch_mm() happens to have that
barrier already, but less so when the architecture only provides the
full barrier in switch_to() or spin_unlock().
It is a bug in the rseq switch_mm_cid() implementation. All architectures
that don't have memory barriers in switch_mm(), but rather have the full
barrier either in finish_lock_switch() or switch_to() have them too late
for the needs of switch_mm_cid().
Introduce a new smp_mb__after_switch_mm(), defined as smp_mb() in the
generic barrier.h header, and use it in switch_mm_cid() for scheduler
transitions where switch_mm() is expected to provide a memory barrier.
Architectures can override smp_mb__after_switch_mm() if their
switch_mm() implementation provides an implicit memory barrier.
Override it with a no-op on x86 which implicitly provide this memory
barrier by writing to CR3.
Fixes: 223baf9d17 ("sched: Fix performance regression introduced by mm_cid")
Reported-by: levi.yun <yeoreum.yun@arm.com>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> # for arm64
Acked-by: Dave Hansen <dave.hansen@linux.intel.com> # for x86
Cc: <stable@vger.kernel.org> # 6.4.x
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240415152114.59122-2-mathieu.desnoyers@efficios.com
As described in the ib_map_mr_sg function comment, it returns the number
of sg elements that were mapped to the memory region. However,
hns_roce_map_mr_sg returns the number of pages required for mapping the
DMA area. Fix it.
Fixes: 9b2cf76c9f ("RDMA/hns: Optimize PBL buffer allocation process")
Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com>
Link: https://lore.kernel.org/r/20240411033851.2884771-1-shaozhengchao@huawei.com
Reviewed-by: Junxian Huang <huangjunxian6@hisilicon.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Commit dcf70df204 ("af_unix: Fix up unix_edge.successor for embryo
socket.") added spin_lock(&unix_gc_lock) in accept() path, and it
caused regression in a stress test as reported by kernel test robot.
If the embryo socket is not part of the inflight graph, we need not
hold the lock.
To decide that in O(1) time and avoid the regression in the normal
use case,
1. add a new stat unix_sk(sk)->scm_stat.nr_unix_fds
2. count the number of inflight AF_UNIX sockets in the receive
queue under unix_state_lock()
3. move unix_update_edges() call under unix_state_lock()
4. avoid locking if nr_unix_fds is 0 in unix_update_edges()
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202404101427.92a08551-oliver.sang@intel.com
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240413021928.20946-1-kuniyu@amazon.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Dmitry Safonov via says:
====================
selftests/net/tcp_ao: A bunch of fixes for TCP-AO selftests
Started as addressing the flakiness issues in rst_ipv*, that affect
netdev dashboard.
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
====================
Link: https://lore.kernel.org/r/20240413-tcp-ao-selftests-fixes-v1-0-f9c41c96949d@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On my new laptop with packages from nixos-unstable, gcc 12.3.0 produces
> lib/setup.c: In function ‘__test_msg’:
> lib/setup.c:20:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 20 | ksft_print_msg(buf);
> | ^~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_ok’:
> lib/setup.c:26:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 26 | ksft_test_result_pass(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_fail’:
> lib/setup.c:32:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 32 | ksft_test_result_fail(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_xfail’:
> lib/setup.c:38:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 38 | ksft_test_result_xfail(buf);
> | ^~~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_error’:
> lib/setup.c:44:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 44 | ksft_test_result_error(buf);
> | ^~~~~~~~~~~~~~~~~~~~~~
> lib/setup.c: In function ‘__test_skip’:
> lib/setup.c:50:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 50 | ksft_test_result_skip(buf);
> | ^~~~~~~~~~~~~~~~~~~~~
> cc1: some warnings being treated as errors
As the buffer was already pre-printed into, print it as a string
rather than a format-string.
Fixes: cfbab37b3d ("selftests/net: Add TCP-AO library")
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On my new laptop with packages from nixos-unstable, gcc 12.3.0 produces:
> lib/proc.c: In function ‘netstat_read_type’:
> lib/proc.c:89:9: error: format not a string literal and no format arguments [-Werror=format-security]
> 89 | if (fscanf(fnetstat, type->header_name) == EOF)
> | ^~
> cc1: some warnings being treated as errors
Here the selftests lib parses header name, while expectes non-space word
ending with a column.
Fixes: cfbab37b3d ("selftests/net: Add TCP-AO library")
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The structure is on the stack and has to be zero-initialized as
the kernel checks for:
> if (in.reserved != 0 || in.reserved2 != 0)
> return -EINVAL;
Fixes: b26660531c ("selftests/net: Add test for TCP-AO add setsockopt() command")
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, "active reset" cases are flaky, because select() is called
for 3 sockets, while only 2 are expected to receive RST.
The idea of the third socket was to get into request_sock_queue,
but the test mistakenly attempted to connect() after the listener
socket was shut down.
Repair this test, it's important to check the different kernel
code-paths for signing RST TCP-AO segments.
Fixes: c6df7b2361 ("selftests/net: Add TCP-AO RST test")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_weight_and() to avoid the need for a temporary cpumask on
the stack.
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Set netdev and RoCEv2 flag to enable GID population on port 1.
Use GIDs of the master netdev. As mc->ports[] stores slave devices,
use a helper to get the master netdev.
Signed-off-by: Konstantin Taranov <kotaranov@microsoft.com>
Link: https://lore.kernel.org/r/1712738551-22075-5-git-send-email-kotaranov@linux.microsoft.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Tony Nguyen says:
====================
This series contains updates to ice driver only.
Lukasz removes unnecessary argument from ice_fdir_comp_rules().
Jakub adds support for ethtool 'ether' flow-type rules.
Jake moves setting of VF MSI-X value to initialization function and adds
tracking of VF relative MSI-X index.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
ice: store VF relative MSI-X index in q_vector->vf_reg_idx
ice: set vf->num_msix in ice_initialize_vf_entry()
ice: Implement 'flow-type ether' rules
ice: Remove unnecessary argument from ice_fdir_comp_rules()
====================
Link: https://lore.kernel.org/r/20240412210534.916756-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Merge series from Andy Shevchenko <andriy.shevchenko@linux.intel.com>:
A couple of additional refactorings on top of the multi-CS support.
One is to make sure that the comment and the code are not disrupted
if additional changes come in the future and second one is f or the
sake of deduplication. In both cases it also makes indentation level
smaller in the affected pieces of the code.
No functional changes intended.
On some cs42l43 systems a couple of cs35l56 amplifiers are attached
to the cs42l43's SPI and I2S. On Windows the cs42l43 is controlled
by a SDCA class driver and these two amplifiers are controlled by
firmware running on the cs42l43. However, under Linux the decision
was made to interact with the cs42l43 directly, affording the user
greater control over the audio system. However, this has resulted
in an issue where these two bridged cs35l56 amplifiers are not
populated in ACPI and must be added manually.
Check for the presence of the "01fa-cirrus-sidecar-instances" property
in the SDCA extension unit's ACPI properties to confirm the presence
of these two amplifiers and if they exist add them manually onto the
SPI bus.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Maciej Strozek <mstrozek@opensource.cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240416100904.3738093-5-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Update the name for software node based SPI devices to use the fwnode
name as the device name. This is helpful since swnode devices are
usually added within the kernel, and the kernel often then requires a
predictable name such that it can refer back to the device.
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240416100904.3738093-4-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use is_acpi_device_node() rather than checking ACPI_COMPANION(), such
that when checking for other types of firmware node, the code can
consistently do checks against the fwnode.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240416100904.3738093-3-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
SPI devices can specify a cs-gpios property to enumerate their
chip selects. Under device tree, a zero entry in this property can
be used to specify that a particular chip select is using the SPI
controllers native chip select, for example:
cs-gpios = <&gpio1 0 0>, <0>;
Here, the second chip select is native. However, when using swnodes
there is currently no way to specify a native chip select. The
proposal here is to register a swnode_gpio_undefined software node,
that can be specified to allow the indication of a native chip
select. For example:
static const struct software_node_ref_args device_cs_refs[] = {
{
.node = &device_gpiochip_swnode,
.nargs = 2,
.args = { 0, GPIO_ACTIVE_LOW },
},
{
.node = &swnode_gpio_undefined,
.nargs = 0,
},
};
Register the swnode as the gpiolib is initialised and check in
swnode_get_gpio_device() if the returned node matches
swnode_gpio_undefined and return -ENOENT, which matches the
behaviour of the device tree system when it encounters a 0 phandle.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20240416100904.3738093-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The string SND_SOC_DAPM_DIR_OUT is printed in the snd_soc_dapm_path trace
event instead of its value:
(((REC->path_dir) == SND_SOC_DAPM_DIR_OUT) ? "->" : "<-")
User space cannot parse this, as it has no idea what SND_SOC_DAPM_DIR_OUT
is. Use TRACE_DEFINE_ENUM() to convert it to its value:
(((REC->path_dir) == 1) ? "->" : "<-")
So that user space tools, such as perf and trace-cmd, can parse it
correctly.
Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Fixes: 6e588a0d83 ("ASoC: dapm: Consolidate path trace events")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20240416000303.04670cdf@rorschach.local.home
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the dai-link subnodes and the audio-routing property, allowing
to describe machine specific audio hardware and links in device tree.
While at it, also deprecate the old properties which were previously
used with the driver's partially hardcoded configuration.
Also, since describing machine specific audio hardware and links replaces
the now deprecated old logic doing the same in a driver hardcoded fashion,
it is not allowed to have both the old and new properties together.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-17-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the dai-link subnodes and the audio-routing property, allowing
to describe machine specific audio hardware and links in device tree.
While at it, also deprecate the old properties which were previously
used with the driver's partially hardcoded configuration.
Also, since describing machine specific audio hardware and links replaces
the now deprecated old logic doing the same in a driver hardcoded fashion,
it is not allowed to have both the old and new properties together.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-16-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Document the dai-link subnodes and the audio-routing property, allowing
to describe machine specific audio hardware and links in device tree.
While at it, also deprecate the old properties which were previously
used with driver hardcoded configuration.
Also, since describing machine specific audio hardware and links replaces
the now deprecated old logic doing the same in a driver hardcoded fashion,
it is not allowed to have both the old and new properties together.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-15-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Copy the few differences from mt8186-mt6166-da7219-max98357 in the
mt8186-mt6366-rt1019-rt5682s driver to greatly reduce code duplication;
since now the driver is meant to support MT8186 with the MT6366 PMIC
codec and various combinations of I2S codecs, rename the driver to
mt8186-mt6366 for consistency with MT8195 and MT8188, and rename
the configuration option to SND_SOC_MT8186_MT6366.
Since right now there is no machine using the da7219-max98357 yet, the
snd_soc_dapm_route array was omitted as it's now possible to specify
the audio routing in device trees instead.
While at it, also add the missing sentinel comment to the last entry
of the of_device_id array.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-14-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since the mtk-afe-platform-driver generic mtk_afe_pcm_platform now has
a common .probe() callback, there is no reason to keep duplicating this
function over and over in the SoC specific AFE-PCM drivers: switch over
to register with the common bits instead.
Note that MT8186 was left out of this because it is registering some
extra sinegen controls in the AFE-PCM probe callback and needs extra
cleanups to be able to use the common bits.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-13-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Multiple MediaTek AFE PCM component drivers are using their own .probe()
callback, but most of those are simply duplicated functions as they are
doing exactly the same thing over and over.
Add a common probe callback for this component to reduce duplication.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-12-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a const mtk_pcm_constraints_data struct array with all of the
(again, constant) constraints for all of the supported usecases,
remove the duplicated functions and call mtk_soundcard_startup()
instead in all of the .startup() callbacks.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-11-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a const mtk_pcm_constraints_data struct array with all of the
(again, constant) constraints for all of the supported usecases,
remove the duplicated functions and call mtk_soundcard_startup()
instead in all of the .startup() callbacks.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-10-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a const mtk_pcm_constraints_data struct array with all of the
(again, constant) constraints for all of the supported usecases,
remove the duplicated functions and call mtk_soundcard_startup()
instead in all of the .startup() callbacks.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-9-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MediaTek platforms are typically setting PCM rate and channels
constraints for playback, capture and HDMI/DisplayPort playback:
commonize the startup callback by adding the PCM constraints data
to the mtk_platform_card_data structure and by reusing the common
mtk_soundcard_startup() function for all of them by getting back
the parameters from the aforementioned struct.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-8-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.
This is also adding the possibility of specifying the links and routing
with the audio-routing property and (x)-dai-link nodes in device trees
to stop hardcoding machine specific links in the card driver assupported
by the common probe function, but support for legacy device trees is
retained with a legacy_probe function, which is used only in case the
new properties are not found.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-7-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.
This is also adding the possibility of specifying the links and routing
with the audio-routing property and (x)-dai-link nodes in device trees
to stop hardcoding machine specific links in the card driver assupported
by the common probe function, but support for legacy device trees is
retained with a legacy_probe function, which is used only in case the
new properties are not found.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-6-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.
This is also adding the possibility of specifying the links and routing
with the audio-routing property and (x)-dai-link nodes in device trees
to stop hardcoding machine specific links in the card driver assupported
by the common probe function, but support for legacy device trees is
retained with a legacy_probe function, which is used only in case the
new properties are not found.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-5-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add mtk_soundcard_pdata platform data for the MediaTek common sound card
probe mechanism, including a driver/soc-specific probe extension (used
for bits that cannot be commonized hence specific to this driver), and
change the probe function to mtk_soundcard_common_probe.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-4-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Apart from a dai_link_list variable, the mtk_sof_priv currently holds
data that never gets modified during runtime.
Constify the mtk_sof_priv structure and move the SOF dai_link_list as
sof_dai_link_list in struct mtk_soc_card_data, which is a structure
that already holds the card's machine specific, runtime modified data.
This allows to safely pass the mtk_sof_priv structure as platform data
for the commonized card probe mechanism.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a common machine soundcard driver probe function that supports both
DSP and AFE-direct usecases and also provides a hook for legacy machine
soundcard driver probe mechanisms.
Note that the hook is there because, even for legacy probe, a lot of the
actual code can still be commonized, hence still reducing duplication
for the legacy devicetree retrocompatibility cases.
This common probe function deprecates all of the inconsistent previous
probe mechanisms and aims to settle all of the MediaTek card drivers on
consistent and common devicetree properties describing wanted DAIs,
device specific DAI configuration and DAI links to codecs found on
each device/board.
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240416071410.75620-2-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Due to the reading of FIFO during the dump of data registers in
debugfs, if SPI transmission is in progress, it will be affected
and may result in transmission failure. Therefore, the dump
interface of data registers in debugfs is removed.
Fixes: 2b2142f247 ("spi: hisi-kunpeng: Add debugfs support")
Signed-off-by: Devyn Liu <liudingyuan@huawei.com>
Reviewed-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/20240416015839.3323398-1-liudingyuan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To run correctly, each Virtual Function must be provisioned with
some chunk of shared hardware or firmware resources (like GGTT,
device memory, GuC doorbell IDs, GuC context IDs) and scheduling
parameters (execution quantum or preemption timeout).
All resources assigned to VFs must be excluded from the PF driver
use and may require some additional preparation steps (like setup
of the LMTT or update of the GGTT PTE). Those provisioning details
must be then sent to the GuC firmware as most of those details
will be shared later with the VF drivers during their boot.
Add basic functions to provision VFs with all hardware resources
or scheduling parameters. We will use them shortly in upcoming
patches either in manual provisioning over debugfs, exposed to the
advanced users, or automatic provisioning done by PF driver during
VFs enabling.
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-7-michal.wajdeczko@intel.com
The PF driver must maintain additional GT level data per each VF.
This additional per-VF data will be added in upcoming patches and
will include: provisioning configuration (like GGTT space or LMEM
allocation sizes or scheduling parameters), monitoring thresholds
and counters, and more.
As number of supported VFs varies across platforms use flexible
array where first entry will contain metadata for the PF itself
(if such configuration parameter is applicable for the PF) and
all remaining entries will contain data for potential VFs.
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-6-michal.wajdeczko@intel.com
In upcoming patches the PF driver will add support to change VFs
configuration and will need to use PF2GUC_UPDATE_VF_CFG messages.
Add necessary definitions to our GuC firmware ABI header.
Definitions of the GuC VF Configuration KLVs used by this action
are already present in abi/guc_klvs_abi.h
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-5-michal.wajdeczko@intel.com
The PF driver will need to know size of the remaining available
VRAM to estimate fair VRAM allocations that could be used across
all VFs in automatic VFs provisioning mode. Add helper function
for that. We will use it in upcoming patch.
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415173937.1287-4-michal.wajdeczko@intel.com
