Compatibles are ordered by date of addition.
Switch to (deterministic) alphabetical ordering.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://msgid.link/r/20240410-cdns-qspi-mbly-v3-1-7b7053449cf7@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://msgid.link/r/20240410172615.255424-2-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so the module could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://msgid.link/r/20240410172615.255424-1-krzk@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
deinit() callback was solely introduced for the pcie-rcar-gen4 driver where
it is used to do platform specific resource deallocation. And this callback
is called right at the end of the dw_pcie_ep_exit() API. So it doesn't
matter whether it is called within or outside of dw_pcie_ep_exit() API.
So let's remove this callback and directly call rcar_gen4_pcie_ep_deinit()
in pcie-rcar-gen4 driver to do resource deallocation after the completion
of dw_pcie_ep_exit() API in rcar_gen4_remove_dw_pcie_ep().
This simplifies the DWC layer.
Link: https://lore.kernel.org/linux-pci/20240327-pci-dbi-rework-v12-3-082625472414@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
All of the APIs are missing the Kernel-doc comments. Hence, add them.
Link: https://lore.kernel.org/linux-pci/20240327-pci-dbi-rework-v12-2-082625472414@linaro.org
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
The DWC glue drivers requiring an active reference clock from the PCIe host
for initializing their PCIe EP core, set a flag called 'core_init_notifier'
to let DWC driver know that these drivers need a special attention during
initialization. In these drivers, access to the hw registers (like DBI)
before receiving the active refclk from host will result in access failure
and also could cause a whole system hang.
But the current DWC EP driver doesn't honor the requirements of the drivers
setting 'core_init_notifier' flag and tries to access the DBI registers
during dw_pcie_ep_init(). This causes the system hang for glue drivers such
as Tegra194 and Qcom EP as they depend on refclk from host and have set the
above mentioned flag.
To workaround this issue, users of the affected platforms have to maintain
the dependency with the PCIe host by booting the PCIe EP after host boot.
But this won't provide a good user experience, since PCIe EP is _one_ of
the features of those platforms and it doesn't make sense to delay the
whole platform booting due to PCIe requiring active refclk.
So to fix this issue, let's move all the DBI access from
dw_pcie_ep_init() in the DWC EP driver to the dw_pcie_ep_init_complete()
API. This API will only be called by the drivers setting
'core_init_notifier' flag once refclk is received from host. For the rest
of the drivers that gets the refclk locally, this API will be called
within dw_pcie_ep_init().
Link: https://lore.kernel.org/linux-pci/20240327-pci-dbi-rework-v12-1-082625472414@linaro.org
Fixes: e966f7390d ("PCI: dwc: Refactor core initialization code for EP mode")
Co-developed-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Ever since commit f25b5fae29 ("PCI: endpoint: Setting a BAR size > 4 GB
is invalid if 64-bit flag is not set") it has been impossible to get the
.set_bar() callback with a BAR size > 2 GB (yes, 2GB!), if the BAR was
also not requested to be configured as a 64-bit BAR.
It is however possible that an EPF driver configures a BAR as 64-bit,
even if the requested size is < 4 GB.
Respect the requested BAR configuration, just like how it is already
respected with regards to the prefetchable bit.
Link: https://lore.kernel.org/linux-pci/20240320113157.322695-8-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Ever since commit f25b5fae29 ("PCI: endpoint: Setting a BAR size > 4 GB
is invalid if 64-bit flag is not set") it has been impossible to get the
.set_bar() callback with a BAR size > 2 GB (yes, 2GB!), if the BAR was
also not requested to be configured as a 64-bit BAR.
Thus, forcing setting the 64-bit flag for BARs larger than 2 GB in the
lower level driver is dead code and can be removed.
It is however possible that an EPF driver configures a BAR as 64-bit,
even if the requested size is < 4 GB.
Respect the requested BAR configuration, just like how it is already
respected with regards to the prefetchable bit.
Link: https://lore.kernel.org/linux-pci/20240320113157.322695-7-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
KVM/arm64 relies on TLBI RANGE feature to flush TLBs when the dirty
pages are collected by VMM and the page table entries become write
protected during live migration. Unfortunately, the operand passed
to the TLBI RANGE instruction isn't correctly sorted out due to the
commit 117940aa6e ("KVM: arm64: Define kvm_tlb_flush_vmid_range()").
It leads to crash on the destination VM after live migration because
TLBs aren't flushed completely and some of the dirty pages are missed.
For example, I have a VM where 8GB memory is assigned, starting from
0x40000000 (1GB). Note that the host has 4KB as the base page size.
In the middile of migration, kvm_tlb_flush_vmid_range() is executed
to flush TLBs. It passes MAX_TLBI_RANGE_PAGES as the argument to
__kvm_tlb_flush_vmid_range() and __flush_s2_tlb_range_op(). SCALE#3
and NUM#31, corresponding to MAX_TLBI_RANGE_PAGES, isn't supported
by __TLBI_RANGE_NUM(). In this specific case, -1 has been returned
from __TLBI_RANGE_NUM() for SCALE#3/2/1/0 and rejected by the loop
in the __flush_tlb_range_op() until the variable @scale underflows
and becomes -9, 0xffff708000040000 is set as the operand. The operand
is wrong since it's sorted out by __TLBI_VADDR_RANGE() according to
invalid @scale and @num.
Fix it by extending __TLBI_RANGE_NUM() to support the combination of
SCALE#3 and NUM#31. With the changes, [-1 31] instead of [-1 30] can
be returned from the macro, meaning the TLBs for 0x200000 pages in the
above example can be flushed in one shoot with SCALE#3 and NUM#31. The
macro TLBI_RANGE_MASK is dropped since no one uses it any more. The
comments are also adjusted accordingly.
Fixes: 117940aa6e ("KVM: arm64: Define kvm_tlb_flush_vmid_range()")
Cc: stable@kernel.org # v6.6+
Reported-by: Yihuang Yu <yihyu@redhat.com>
Suggested-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Reviewed-by: Shaoqin Huang <shahuang@redhat.com>
Link: https://lore.kernel.org/r/20240405035852.1532010-2-gshan@redhat.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Hewlett-Packard HP Pavilion 17 Notebook PC/1972 is an Intel Ivy Bridge
system with a muxless AMD Radeon dGPU. Attempting to use the dGPU fails
with the following sequence:
ACPI Error: Aborting method \AMD3._ON due to previous error (AE_AML_LOOP_TIMEOUT) (20230628/psparse-529)
radeon 0000:01:00.0: not ready 1023ms after resume; waiting
radeon 0000:01:00.0: not ready 2047ms after resume; waiting
radeon 0000:01:00.0: not ready 4095ms after resume; waiting
radeon 0000:01:00.0: not ready 8191ms after resume; waiting
radeon 0000:01:00.0: not ready 16383ms after resume; waiting
radeon 0000:01:00.0: not ready 32767ms after resume; waiting
radeon 0000:01:00.0: not ready 65535ms after resume; giving up
radeon 0000:01:00.0: Unable to change power state from D3cold to D0, device inaccessible
The issue is that the Root Port the dGPU is connected to can't handle the
transition from D3cold to D0 so the dGPU can't properly exit runtime PM.
The existing logic in pci_bridge_d3_possible() checks for systems that are
newer than 2015 to decide that D3 is safe. This would nominally work for
an Ivy Bridge system (which was discontinued in 2015), but this system
appears to have continued to receive BIOS updates until 2017 and so this
existing logic doesn't appropriately capture it.
Add the system to bridge_d3_blacklist to prevent D3cold from being used.
Link: https://lore.kernel.org/r/20240307163709.323-1-mario.limonciello@amd.com
Reported-by: Eric Heintzmann <heintzmann.eric@free.fr>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3229
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Eric Heintzmann <heintzmann.eric@free.fr>
Lmem init check should be done only after pcode initialization
status is complete. Move lmem init check after pcode status
check. Also wait for a short while after pcode status check
to allow completion of the task.
Failing to do so, can lead to aborting the module load
leaving the system unusable. Wait until the lmem initialization
is complete within a timeout (60s) or till the user aborts.
v2: use bool as return type
re-order the code comment (Rodrigo)
add comment for deferring probe (Himal)
v3: rebase
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410085005.1126343-3-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The root tile indicates the pcode initialization is complete
when all tiles have completed their initialization.
So the mailbox can be polled only on the root tile.
Check pcode init status only on root tile and move it to
device probe early as root tile is initialized there.
Also make similar changes in resume paths.
v2: add lock/unlocked version of pcode_mailbox_rw
to allow pcode init to be called in device
early probe (Rodrigo)
v3: add code description about using root tile
change function names to xe_pcode_probe_early
and xe_pcode_init (Rodrigo)
Signed-off-by: Riana Tauro <riana.tauro@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410085005.1126343-2-riana.tauro@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Add a workaround to fix BS (blank start) to BS jitter fixes on non-UHBR
MST/FEC and UHBR links. Bspec doesn't provide an actual WA ID for this.
Bspec: 65448, 50054
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-7-imre.deak@intel.com
Disable the workaround inserting an SF symbol between the last DSC EOC
symbol and the subsequent BS symbol. The WA is enabled by default -
based on the register's reset value - and Bspec requires disabling it
explicitly. Bspec doesn't provide an actual WA ID for this.
Bspec: 50054, 65448, 68849
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-6-imre.deak@intel.com
Add a workaround to fix timing issues on links with DSC enabled -
presumedly related to the audio functionality.
Bspec requires enabling this workaround if audio is enabled on ADLP,
however Windows enables it whenever DSC is enabled ADLP onwards; follow
Windows.
Bspec: 50490, 55424
v2: Fix WA code comment formatting. (Ankit)
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-5-imre.deak@intel.com
Since commit 20af807d80 ("arm64: Avoid cpus_have_const_cap() for
ARM64_HAS_GIC_PRIO_MASKING"), the alternative.h include is not used,
so remove it.
Fixes: 20af807d80 ("arm64: Avoid cpus_have_const_cap() for ARM64_HAS_GIC_PRIO_MASKING")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20240314063819.2636445-1-ruanjinjie@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
Add a workaround to fix BS jitter issues on MST links if the HBLANK
period is less than 1 MTP. The WA applies only to UHBR rates while on
non-UHBR the specification requires disabling it explicitly - presumedly
because the register's reset value has the WA enabled.
Bspec: 50050, 55424
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-3-imre.deak@intel.com
Add a workaround to fix BS (blank start) to BS jitter issues on MST
links when FEC is enabled. Neither Bspec requires this nor Windows
clears the WA when disabling the output - presumedly because
CHICKEN_MISC_3 gets reset after disabling the pipe/transcoder - so
follow suit.
Bspec: 50050, 55424
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240129175533.904590-2-imre.deak@intel.com
Now that perf supports giving the PMU device a parent, we can use our
platform device to make the relationship between CMN instances and PMU
IDs trivially discoverable, from either nominal direction:
root@crazy-taxi:~# ls /sys/devices/platform/ARMHC600:00 | grep cmn
arm_cmn_0
root@crazy-taxi:~# realpath /sys/bus/event_source/devices/arm_cmn_0/..
/sys/devices/platform/ARMHC600:00
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/25d4428df1ddad966c74a3ed60171cd3ca6c8b66.1712682917.git.robin.murphy@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
Export the sleepable kfuncs we have on HID-BPF in tracing bpf programs,
but with the condition of being used in a sleepable context.
This allows to use the bpf_timer when used in a sleepable context
through bpf_timer_set_sleepable_cb() and initiate work from a device event.
Link: https://lore.kernel.org/r/20240315-b4-hid-bpf-new-funcs-v4-7-079c282469d3@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
It can be interesting to inject events from BPF as if the event were
to come from the device.
For example, some multitouch devices do not all the time send a proximity
out event, and we might want to send it for the physical device.
Compared to uhid, we can now inject events on any physical device, not
just uhid virtual ones.
Link: https://lore.kernel.org/r/20240315-b4-hid-bpf-new-funcs-v4-5-079c282469d3@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
We currently only export hid_hw_raw_request() as a BPF kfunc.
However, some devices require an explicit write on the Output Report
instead of the use of the control channel.
So also export hid_hw_output_report to BPF
Link: https://lore.kernel.org/r/20240315-b4-hid-bpf-new-funcs-v4-2-079c282469d3@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
When unloading a module, its state is changing MODULE_STATE_LIVE ->
MODULE_STATE_GOING -> MODULE_STATE_UNFORMED. Each change will take
a time. `is_module_text_address()` and `__module_text_address()`
works with MODULE_STATE_LIVE and MODULE_STATE_GOING.
If we use `is_module_text_address()` and `__module_text_address()`
separately, there is a chance that the first one is succeeded but the
next one is failed because module->state becomes MODULE_STATE_UNFORMED
between those operations.
In `check_kprobe_address_safe()`, if the second `__module_text_address()`
is failed, that is ignored because it expected a kernel_text address.
But it may have failed simply because module->state has been changed
to MODULE_STATE_UNFORMED. In this case, arm_kprobe() will try to modify
non-exist module text address (use-after-free).
To fix this problem, we should not use separated `is_module_text_address()`
and `__module_text_address()`, but use only `__module_text_address()`
once and do `try_module_get(module)` which is only available with
MODULE_STATE_LIVE.
Link: https://lore.kernel.org/all/20240410015802.265220-1-zhengyejian1@huawei.com/
Fixes: 28f6c37a29 ("kprobes: Forbid probing on trampoline and BPF code areas")
Cc: stable@vger.kernel.org
Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Initialize cpu_mitigations to CPU_MITIGATIONS_OFF if the kernel is built
with CONFIG_SPECULATION_MITIGATIONS=n, as the help text quite clearly
states that disabling SPECULATION_MITIGATIONS is supposed to turn off all
mitigations by default.
│ If you say N, all mitigations will be disabled. You really
│ should know what you are doing to say so.
As is, the kernel still defaults to CPU_MITIGATIONS_AUTO, which results in
some mitigations being enabled in spite of SPECULATION_MITIGATIONS=n.
Fixes: f43b9876e8 ("x86/retbleed: Add fine grained Kconfig knobs")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Daniel Sneddon <daniel.sneddon@linux.intel.com>
Cc: stable@vger.kernel.org
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240409175108.1512861-2-seanjc@google.com
The radio for which the survey info needs to be collected
depends on the channel idx which could be based on the band.
Use the idx to identify the appropriate sband since multiple
bands could be combined for single wiphy case.
Also use the channel idx and sband to identify the corresponding
radio on which the survey results needs to be populated.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240405194519.1337906-13-quic_ramess@quicinc.com
Since multiple radios are abstracted under a single wiphy,
apply the rts threshold value to all the vdevs of the radios
combined under single wiphy.
This also implies that vif specific rts threshold support
needs to be added in future from cfg80211/mac80211.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240405194519.1337906-12-quic_ramess@quicinc.com
As multiple radios are combined into a single wiphy, and
the current infrastructure supports only set/get antenna
for the wiphy, the max Tx/Rx antenna capability is advertised
during wiphy register.
Hence, When antenna set/get is received we adjust the set/get
based on max radio capability and set/get antenna accordingly.
Multi radio capability needs to introduced with interface
combination changes to support single wiphy model in cfg80211
which would help extend the wiphy specific get/set configs similar
to this to per hw level.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240405194519.1337906-11-quic_ramess@quicinc.com
With all the radios being combined and registered as a single
mac80211 hw/wiphy, separate regd built from firmware rules need
not be updated to cfg80211. Rather we can pick one of the regd
built from the rules to update to cfg80211 for the whole
registered device. We prefer 6 GHz pdev based rules since it has
the rules for all bands. If the hw doesn't support 6 GHz, then update
rules from one of the pdevs.
Also, when regulatory notification is received, update to all the
underlying radios/ar so that it becomes aware of the change and as
well us it updates its local regd with the new country rules. Later
pick the appropriate pdev's regd(6 GHz if available) and apply to
cfg80211.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240405194519.1337906-10-quic_ramess@quicinc.com
Since vif and sta objects of different radios are added to same
local hw list in mac80211, additional checks need to be done
in driver to ensure we are processing the intended vif
and sta corresponding to the radio when the vif and sta mac80211
iterator utils are used from driver.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240405194519.1337906-9-quic_ramess@quicinc.com
Since the vdev create for a corresponding vif is deferred
until a channel is assigned, cache the information which
are received through mac80211 ops between add_interface()
and assign_vif_chanctx() and set them once the vdev is
created on one of the ath12k radios as the channel gets
assigned via assign_vif_chanctx().
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240405194519.1337906-8-quic_ramess@quicinc.com
For ops which passes the vif info, fetch the radio(ar)
to be used for corresponding functions based on the
the vdev creation status. If the vdev is not created yet,
which could happen when the ops are called before channel
is assigned for the vif, the data needs to be cached and this
is done in followup changes.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240405194519.1337906-7-quic_ramess@quicinc.com
When multiple radios are advertised as a single wiphy which
supports various bands, a default scan request to mac80211
from cfg80211 will split the driver request based on band,
so each request will have channels belonging to the same band.
With this supported by default, the ath12k driver on receiving
this request checks for one of the channels in the request and
selects the corresponding radio(ar) on which the scan is going
to be performed and creates a vdev on that radio.
Note that on scan completion this vdev is not deleted. If a new
scan request is seen on that same vif for a different band the
vdev will be deleted and created on the new radio supporting the
request. The vdev delete logic is refactored to have this done
dynamically.
The reason for not deleting the vdev on scan stop is to avoid
repeated delete-create sequence if the scan is on the same band.
Also, during channel assign, new vdev creation can be optimized
as well.
Also if the scan is requested when the vdev is in started state,
no switching to new radio is allowed and scan on channels only
within same radio is allowed.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Co-developed-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240405194519.1337906-6-quic_ramess@quicinc.com
With single wiphy, multiple radios are combined into a single wiphy.
Since any channel can be assigned to a vif being brought up,
the vdev cannot be created during add_interface(). Hence defer the
vdev creation till channel assignment.
If only one radio is part of the wiphy, then the existing logic
is maintained, i.e vdevs are created during add interface and
started during channel assignment. This ensures no functional changes
to single pdev devices which has only one radio in the SoC.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240405194519.1337906-5-quic_ramess@quicinc.com
When mac80211 does drv start/stop, apply the state change
for all the radios within the wiphy in ath12k.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240405194519.1337906-4-quic_ramess@quicinc.com
Modify add and remove chanctx mac80211 ops to fetch the correct
radio(ar) based on channel context.
This change also introduces new helper function to fetch the
radio/ar based on channel context and ieee80211_chan which internally
uses the radio's low/high freq range.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240405194519.1337906-3-quic_ramess@quicinc.com
Currently MAC HW un/register helper function support the single radio.
To enable single/multi link operation in the future, the following helper
functions need to be refactored to accommodate multiple radios under a
single MAC HW un/register:
* ath12k_ah_to_ar()
* ath12k_mac_hw_allocate()
* ath12k_mac_hw_register()
* ath12k_mac_hw_unregister()
This refactoring will make it easier to scale these functionalities and
support Multi link operation.
Current Multi wiphy Model
+---------------+ +---------------+ +---------------+
| Mac80211 hw | | Mac80211 hw | | Mac80211 hw |
| private data | | private data | | private data |
| | | | | |
|ath12k_hw (ah) | |ath12k_hw (ah) | |ath12k_hw (ah) |
| | | | | |
| +-----------+ | | +-----------+ | | +-----------+ |
| | ar (2GHz) | | | | ar (5GHz) | | | | ar (6GHz) | |
| +-----------+ | | +-----------+ | | +-----------+ |
| | | | | |
+---------------+ +---------------+ +---------------+
Single wiphy Model
+--------------+
| Mac80211 hw |
| private data |
| |
|ath12k hw (ah)|
| +----------+ |
| |ar (2GHz) | |
| +----------+ |
| |ar (5GHz) | |
| +----------+ |
| |ar (6GHz) | |
| +----------+ |
+--------------+
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
Signed-off-by: Rameshkumar Sundaram <quic_ramess@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240405194519.1337906-2-quic_ramess@quicinc.com
Avoid this Yocto build warning to make build reproducible:
WARNING: linux-foo-6.8-r0 do_package_qa: QA Issue:
File /usr/src/debug/linux-foo/6.8-r0/drivers/video/logo/logo_linux_clut224.c
in package linux-foo-src contains reference to TMPDIR
Helge modified the patch to drop the whole line.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Helge Deller <deller@gmx.de>
Refactor code for "is the node's child available?" check by using the
corresponding macro instead, which reads more clearly.
While at it, use scope-based cleanup instead of manual of_node_put()
calls when getting platform data through cdns_xspi_of_get_plat_data().
This removes the unnecessary "node_child" declaration out of the loop's
scope and auto cleans up "node_child" when it goes out of scope, even
when we return early due to error.
Signed-off-by: Kousik Sanagavarapu <five231003@gmail.com>
Link: https://msgid.link/r/20240410130205.179069-1-five231003@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240304091005.717012-2-u.kleine-koenig@pengutronix.de
topo_set_cpuids() updates cpu_present_map and cpu_possible map. It is
invoked during enumeration and "physical hotplug" operations. In the
latter case this results in a kernel crash because cpu_possible_map is
marked read only after init completes.
There is no reason to update cpu_possible_map in that function. During
enumeration cpu_possible_map is not relevant and gets fully initialized
after enumeration completed. On "physical hotplug" the bit is already set
because the kernel allows only CPUs to be plugged which have been
enumerated and associated to a CPU number during early boot.
Remove the bogus update of cpu_possible_map.
Fixes: 0e53e7b656 ("x86/cpu/topology: Sanitize the APIC admission logic")
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/87ttkc6kwx.ffs@tglx
