In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Helge Deller <deller@gmx.de>
There is no reason to prohibit sh7760fb from being built as a
loadable module as suggested by Geert, so change the config symbol
from bool to tristate to allow that and change the FB dependency as
needed.
Fixes: f75f71b2c4 ("fbdev/sh7760fb: Depend on FB=y")
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Helge Deller <deller@gmx.de>
When support for streams was added to the V4L2 subdev API, the
v4l2_subdev_crop structure was extended with a stream field, but the
field was not handled in the core code that translates the
VIDIOC_SUBDEV_[GS]_CROP ioctls to the selection API. Fix it.
Fixes: 2f91e10ee6 ("media: subdev: add stream based configuration")
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The graph walk tries to follow all links, even if they are not between
pads. This causes a crash with, e.g. a MEDIA_LNK_FL_ANCILLARY_LINK link.
Fix this by allowing the walk to proceed only for MEDIA_LNK_FL_DATA_LINK
links.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Cc: stable@vger.kernel.org # for 6.1 and later
Fixes: ae21987283 ("media: mc: entity: Rewrite media_pipeline_start()")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Remove e-mail addresses no longer in use.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Remove e-mail addresses that are no longer valid.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Using __exit for the remove function results in the remove callback
being discarded with CONFIG_VIDEO_ET8EK8=y. When such a device gets
unbound (e.g. using sysfs or hotplug), the driver is just removed
without the cleanup being performed. This results in resource leaks. Fix
it by compiling in the remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: drivers/media/i2c/et8ek8/et8ek8: section mismatch in reference: et8ek8_i2c_driver+0x10 (section: .data) -> et8ek8_remove (section: .exit.text)
Fixes: c5254e72b8 ("[media] media: Driver for Toshiba et8ek8 5MP sensor")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
ipu-cio2 uses generic power management, and pci_pm_runtime_suspend() and
pci_pm_runtime_resume() already take care of setting the PCI device power
state, so the driver doesn't need to do it explicitly.
Remove explicit setting to D3hot or D0 during runtime suspend and resume.
Remove #defines that are no longer used.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Hyungwoo Yang <hyungwoo.yang@intel.com>
Cc: Rajmohan Mani <rajmohan.mani@intel.com>
Cc: Vijaykumar Ramya <ramya.vijaykumar@intel.com>
Cc: Samu Onkalo <samu.onkalo@intel.com>
Cc: Jouni Högander <jouni.hogander@intel.com>
Cc: Jouni Ukkonen <jouni.ukkonen@intel.com>
Cc: Antti Laakso <antti.laakso@intel.com>
[Sakari Ailus: Remove now-redundant local variables.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The kernel configuration VIDEO_DEV is defined twice in Kconfig.
Thus, the duplicate Kconfig dependency is removed.
Signed-off-by: Rajeshwar R Shinde <coolrrsh@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Pointer css_pipe is being assigned a value that is never read afterwards.
The assignment is redundant and can be removed.
Cleans up clang scan build warning:
drivers/staging/media/ipu3/ipu3-css.c:2058:3: warning: Value stored
to 'css_pipe' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Document the link-frequencies property as recommended by the following
document:
https://www.kernel.org/doc/html/v6.9-rc1/driver-api/media/camera-sensor.html#handling-clocks
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The original .txt bindings had the OV2680 power supply names correct,
but the transition from .txt to yaml spelled them incorrectly.
Fix the OV2680 power supply names as the original .txt bindings
as these are the names used by the OV2680 driver and in devicetree.
Fixes: 57226cd8c8 ("media: dt-bindings: ov2680: convert bindings to yaml")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Since commit 63b0cd30b7 ("media: ov2680: Add bus-cfg / endpoint
property verification") the ov2680 no longer probes on a imx7s-warp7:
ov2680 1-0036: error -EINVAL: supported link freq 330000000 not found
ov2680 1-0036: probe with driver ov2680 failed with error -22
As the 'link-frequencies' property is not mandatory, allow the probe
to succeed by skipping the link-frequency verification when the
property is absent.
Cc: stable@vger.kernel.org
Fixes: 63b0cd30b7 ("media: ov2680: Add bus-cfg / endpoint property verification")
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Since commit 63b0cd30b7 ("media: ov2680: Add bus-cfg / endpoint
property verification") even when the correct 'link-frequencies'
property is passed in the devicetree, the driver fails to probe:
ov2680 1-0036: probe with driver ov2680 failed with error -22
The reason is that the variable 'ret' may contain the -EINVAL value
from a previous assignment:
ret = fwnode_property_read_u32(dev_fwnode(dev), "clock-frequency",
&rate);
Fix the problem by clearing 'ret' on the successful path.
Tested on imx7s-warp board with the following devicetree:
port {
ov2680_to_mipi: endpoint {
remote-endpoint = <&mipi_from_sensor>;
clock-lanes = <0>;
data-lanes = <1>;
link-frequencies = /bits/ 64 <330000000>;
};
};
Cc: stable@vger.kernel.org
Fixes: 63b0cd30b7 ("media: ov2680: Add bus-cfg / endpoint property verification")
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The driver dug the supported link frequency up from the V4L2 fwnode
endpoint and used it internally, but failed to report this in the
LINK_FREQ and PIXEL_RATE controls. Fix this.
Fixes: 0677a2d9b7 ("media: ov2740: Add support for 180 MHz link frequency")
Cc: stable@vger.kernel.org # for v6.8 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The notifier_entry of a notifier is not re-initialised after unregistering
the notifier. This leads to dangling pointers being left there so use
list_del_init() to return the notifier_entry an empty list.
Fixes: b8ec754ae4 ("media: v4l: async: Set v4l2_device and subdev in async notifier init")
Cc: <stable@vger.kernel.org> # for 6.6 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The V4L2 device used to be set when the notifier was registered but this
has been moved to the notifier initialisation. Don't touch the V4L2 device
if registration fails.
Fixes: b8ec754ae4 ("media: v4l: async: Set v4l2_device and subdev in async notifier init")
Cc: <stable@vger.kernel.org> # for 6.6 and later
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
struct v4l2_async_notifier has several list_head members, but only
waiting_list and done_list are initialized. notifier_entry was kept
'zeroed' leading to an uninitialized list_head.
This results in a NULL-pointer dereference if csi2_async_register() fails,
e.g. node for remote endpoint is disabled, and returns -ENOTCONN.
The following calls to v4l2_async_nf_unregister() results in a NULL
pointer dereference.
Add the missing list head initializer.
Fixes: b8ec754ae4 ("media: v4l: async: Set v4l2_device and subdev in async notifier init")
Cc: <stable@vger.kernel.org> # for 6.6 and later
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
To support compilation with Media controller disabled, drivers were
required to conditionally call media_device_init and media_device_cleanup.
Add nop implementations of both so drivers don't need to care (or at least
care less).
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Call devm_request_irq() before registering the async notifier, as otherwise
it would be possible to use the device before the interrupts could be
delivered to the driver.
Fixes: c2a6a07afe ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
LoongArch's include/asm/addrspace.h uses SZ_32M and SZ_16K, so add
<linux/sizes.h> to provide those macros to prevent build errors:
In file included from ../arch/loongarch/include/asm/io.h:11,
from ../include/linux/io.h:13,
from ../include/linux/io-64-nonatomic-lo-hi.h:5,
from ../drivers/cxl/pci.c:4:
../include/asm-generic/io.h: In function 'ioport_map':
../arch/loongarch/include/asm/addrspace.h:124:25: error: 'SZ_32M' undeclared (first use in this function); did you mean 'PS_32M'?
124 | #define PCI_IOSIZE SZ_32M
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Current dts file for Loongson-2K2000's GMAC/GNET is incomplete, both irq
and phy descriptions are missing. Add them to make GMAC/GNET work.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Current dts file for Loongson-2K2000 misses the interrupt-controller &
interrupt-cells descriptions in the msi-controller node, and misses the
msi-parent link in the pci root node. Add them to support PCI-MSI.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Some Loongson-2K2000 platforms have ISA/LPC devices such as Super-IO,
define an ISA node in the dts file to avoid access error. Also adjust
the PCI io resource range to avoid confliction.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Some Loongson-2K1000 platforms have ISA/LPC devices such as Super-IO,
define an ISA node in the dts file to avoid access error.
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
When enabling both CONFIG_KFENCE and CONFIG_DEBUG_SG, I get the
following backtraces when running LongArch kernels.
[ 2.496257] kernel BUG at include/linux/scatterlist.h:187!
...
[ 2.501925] Call Trace:
[ 2.501950] [<9000000004ad59c4>] sg_init_one+0xac/0xc0
[ 2.502204] [<9000000004a438f8>] do_test_kpp+0x278/0x6e4
[ 2.502353] [<9000000004a43dd4>] alg_test_kpp+0x70/0xf4
[ 2.502494] [<9000000004a41b48>] alg_test+0x128/0x690
[ 2.502631] [<9000000004a3d898>] cryptomgr_test+0x20/0x40
[ 2.502775] [<90000000041b4508>] kthread+0x138/0x158
[ 2.502912] [<9000000004161c48>] ret_from_kernel_thread+0xc/0xa4
The backtrace is always similar but not exactly the same. It is always
triggered from cryptomgr_test, but not always from the same test.
Analysis shows that with CONFIG_KFENCE active, the address returned from
kmalloc() and friends is not always below vm_map_base. It is allocated
by kfence_alloc() which at least sometimes seems to get its memory from
an address space above vm_map_base. This causes __virt_addr_valid() to
return false for the affected objects.
Let __virt_addr_valid() return 1 for kfence pool addresses, this make
virt_addr_valid()/__virt_addr_valid() work with KFENCE.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
KFENCE changes virt_to_page() to be able to translate tlb mapped virtual
addresses, but forget to change virt_to_phys()/phys_to_virt() and other
translation functions as well. This patch fix it, otherwise some drivers
(such as nvme and virtio-blk) cannot work with KFENCE.
All {virt, phys, page, pfn} translation functions are updated:
1, virt_to_pfn()/pfn_to_virt();
2, virt_to_page()/page_to_virt();
3, virt_to_phys()/phys_to_virt().
DMW/TLB mapped addresses are distinguished by comparing the vaddress
with vm_map_base in virt_to_xyz(), and we define WANT_PAGE_VIRTUAL in
the KFENCE case for the reverse translations, xyz_to_virt().
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
LoongArch will override page_to_virt() which use page_address() in the
KFENCE case (by defining WANT_PAGE_VIRTUAL/HASHED_PAGE_VIRTUAL). So move
lowmem_page_address() a little later to avoid such build errors:
error: implicit declaration of function 'page_address'.
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Much of turbostat can now run with perf, rather than using the MSR driver
Some of turbostat can now run as a regular non-root user.
Add some new output columns for some new GFX hardware.
[This patch updates the version, but otherwise changes no function;
it touches up some checkpatch issues from previous patches]
Signed-off-by: Len Brown <len.brown@intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Robert Foss <rfoss@kernel.org>
Signed-off-by: Robert Foss <rfoss@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240304090555.716327-2-u.kleine-koenig@pengutronix.de
There is no need to implement arch_atomic_sub() family of inline
functions, corresponding macros can be directly implemented using
arch_atomic_add() inlines with negated argument.
No functional changes intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240410062957.322614-4-ubizjak@gmail.com
Introduce arch_atomic64_read_nonatomic() for 32-bit targets to load
the value from atomic64_t location in a non-atomic way. This
function is intended to be used in cases where a subsequent atomic
operation will handle the torn value, and can be used to prime the
first iteration of unconditional try_cmpxchg() loops.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240410062957.322614-2-ubizjak@gmail.com
Xe graphics driver uses different graphics sysfs knobs including
/sys/class/drm/card0/device/tile0/gt0/gtidle/idle_residency_ms
/sys/class/drm/card0/device/tile0/gt0/freq0/cur_freq
/sys/class/drm/card0/device/tile0/gt0/freq0/act_freq
/sys/class/drm/card0/device/tile0/gt1/gtidle/idle_residency_ms
/sys/class/drm/card0/device/tile0/gt1/freq0/cur_freq
/sys/class/drm/card0/device/tile0/gt1/freq0/act_freq
Plus that,
/sys/class/drm/card0/device/tile0/gt<n>/gtidle/name
returns either gt<n>-rc or gt<n>-mc. rc is for GFX and mc is SA Media.
Enhance turbostat to prefer the Xe sysfs knobs when they are available.
Export gt<n>-rc via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt<n>-mc via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
On Meteorlake platform, i915 driver supports the traditional graphics
sysfs knobs including
/sys/class/drm/card0/power/rc6_residency_ms
/sys/class/drm/card0/gt_cur_freq_mhz
/sys/class/drm/card0/gt_act_freq_mhz
At the same time, it also supports
/sys/class/drm/card0/gt/gt0/rc6_residency_ms
/sys/class/drm/card0/gt/gt0/rps_cur_freq_mhz
/sys/class/drm/card0/gt/gt0/rps_act_freq_mhz
/sys/class/drm/card0/gt/gt1/rc6_residency_ms
/sys/class/drm/card0/gt/gt1/rps_cur_freq_mhz
/sys/class/drm/card0/gt/gt1/rps_act_freq_mhz
gt0 is for GFX and gt1 is for SA Media.
Enhance turbostat to prefer the i915 new sysfs knobs.
Export gt0 via BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz.
Export gt1 via BIC_SMA_mc6/BIC_SMAMHz/BIC_SMAACTMHz.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Graphics driver (i915/Xe) on mordern platforms splits GFX and SA Media
information via different sysfs knobs.
Existing BIC_GFX_rc6/BIC_GFXMHz/BIC_GFXACTMHz columns can be reused for
GFX.
Introduce BIC_SAM_mc6/BIC_SAMMHz/BIC_SAMACTMHz columns for SA Media.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/63c9d1e6b07296916e4218c63f59a2dd6c6b6b16.1712732665.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/c7d669d8b0c994c77fb4c3bc7bec78aeb8659c74.1712732665.git.u.kleine-koenig@pengutronix.de
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/adb9b0aca77d7aa8e54d0a664a4ee290834a60a1.1712732665.git.u.kleine-koenig@pengutronix.de
Core in platform_driver_register() already sets the .owner, so driver
does not need to. Whatever is set here will be anyway overwritten by
main driver calling platform_driver_register().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240330202804.83936-1-krzysztof.kozlowski@linaro.org
An overflow can occur in a situation where src.centiseconds
takes the value of 255. This situation is unlikely, but there
is no validation check anywere in the code.
Found by Linux Verification Center (linuxtesting.org) with Svace.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240327132755.13945-1-r.smirnov@omp.ru>
Since K230 has been supported, allow ARCH_CANAAN to be selected to build dt
and drivers for it in defconfig.
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
