Create subvolume, create snapshot and delete subvolume all use
btrfs_subvolume_reserve_metadata() to reserve metadata for the changes
done to the parent subvolume's fs tree, which cannot be mediated in the
normal way via start_transaction. When quota groups (squota or qgroups)
are enabled, this reserves qgroup metadata of type PREALLOC. Once the
operation is associated to a transaction, we convert PREALLOC to
PERTRANS, which gets cleared in bulk at the end of the transaction.
However, the error paths of these three operations were not implementing
this lifecycle correctly. They unconditionally converted the PREALLOC to
PERTRANS in a generic cleanup step regardless of errors or whether the
operation was fully associated to a transaction or not. This resulted in
error paths occasionally converting this rsv to PERTRANS without calling
record_root_in_trans successfully, which meant that unless that root got
recorded in the transaction by some other thread, the end of the
transaction would not free that root's PERTRANS, leaking it. Ultimately,
this resulted in hitting a WARN in CONFIG_BTRFS_DEBUG builds at unmount
for the leaked reservation.
The fix is to ensure that every qgroup PREALLOC reservation observes the
following properties:
1. any failure before record_root_in_trans is called successfully
results in freeing the PREALLOC reservation.
2. after record_root_in_trans, we convert to PERTRANS, and now the
transaction owns freeing the reservation.
This patch enforces those properties on the three operations. Without
it, generic/269 with squotas enabled at mkfs time would fail in ~5-10
runs on my system. With this patch, it ran successfully 1000 times in a
row.
Fixes: e85fde5162 ("btrfs: qgroup: fix qgroup meta rsv leak for subvolume operations")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
We use add_root_meta_rsv and sub_root_meta_rsv to track prealloc and
pertrans reservations for subvolumes when quotas are enabled. The
convert function does not properly increment pertrans after decrementing
prealloc, so the count is not accurate.
Note: we check that the fs is not read-only to mirror the logic in
qgroup_convert_meta, which checks that before adding to the pertrans rsv.
Fixes: 8287475a20 ("btrfs: qgroup: Use root::qgroup_meta_rsv_* to record qgroup meta reserved space")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
Reduce boilerplate by leveraging the COUNTER_COMP_FREQUENCY() macro to
define the "frequency" extension.
Link: https://lore.kernel.org/r/ZfxhEKdSi1amfcJC@ishi
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: David Lechner <david@lechnology.com>
Link: https://lore.kernel.org/r/bf78595f6a49be0b6bb403b466c13177d72c02b7.1710057753.git.u.kleine-koenig@pengutronix.de
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/f70902b2aabecaa9295c28629cd7a8a0e6eb06d0.1710057753.git.u.kleine-koenig@pengutronix.de
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Using a kernel.org address is more consistent for kernel work and should
prevent the need to update again if the underlying email address
changes.
Signed-off-by: William Breathitt Gray <wbg@kernel.org>
Add support for capture events. Captured counter value for each channel
can be retrieved through CCRx register.
STM32 timers can have up to 4 capture channels (on input channel 1 to
channel 4), hence need to check the number of channels before reading
the capture data.
The capture configuration is hard-coded to capture signals on both edges
(non-inverted). Interrupts are used to report events independently for
each channel.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-11-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Add support overflow events. Also add the related validation and
configuration routine. Register and enable interrupts to push events.
STM32 Timers can have either 1 global interrupt, or 4 dedicated interrupt
lines. Request only the necessary interrupt, e.g. either global interrupt
that can report all event types, or update interrupt only for overflow
event.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-10-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Probe the number of capture compare channels, by writing CCER register bits
and read them back. Take care to restore the register original value.
This is a precursor patch to support capture channels.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-9-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Simply add channels 3 and 4 that can be used for capture. Statically
add them, despite some timers doesn't have them. Rather rely on
stm32_action_read that will report "none" action for these currently.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-8-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
This is a precursor patch to support capture channels on all possible
channels and stm32 timer types. Original driver was intended to be used
only as quadrature encoder and simple counter on internal clock.
So, add a check on encoder capability, so the driver may be probed for
timer instances without encoder feature. This way, all timers may be used
as simple counter on internal clock, starting from here.
Encoder capability is retrieved by using the timer index (originally in
stm32-timer-trigger driver and dt-bindings). The need to keep backward
compatibility with existing device tree lead to parse aside trigger node.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-7-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
There's a prescaler in between the selected input signal used for
counting (CK_PSC), and the counter input (CK_CNT).
So add the "prescaler" extension to the counter.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-6-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Introduce the internal clock signal, used to count when in simple rising
function. Also add the "frequency" extension to the clock signal.
With this patch, signal action reports a consistent state when "increase"
function is used, and the counting frequency:
$ echo increase > function
$ grep -H "" signal*_action
signal0_action:none
signal1_action:none
signal2_action:rising edge
$ echo 1 > enable
$ cat count
25425
$ cat count
44439
$ cat ../signal2/frequency
208877930
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-5-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Adopt signals definitions to ease later signals additions.
There are no intended functional changes here.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-4-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
The STM32 timer may count on various sources or channels. The counter
isn't specifically counting on channe1 1. So rename it to avoid a
confusion.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-3-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Drop the Quadrature convention in the signal name. On stm32-timer:
- Quadrature A signal corresponds to timer input ch1, hence "Channel 1"
- Quadrature B signal corresponds to timer input ch2, hence "Channel 2".
So name these signals after their channel. I suspect it referred to the
(unique) quadrature counter support earlier, but the physical input
really is CH1/CH2. This will be easier to support other counter modes.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-2-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Now that there are two users for the "frequency" extension, introduce a
new COUNTER_COMP_FREQUENCY() macro.
This extension is intended to be a read-only signal attribute.
Suggested-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240306153631.4051115-1-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
counter_device_type variable to be a constant structure as well, placing it
into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240219-device_cleanup-counter-v1-1-24d0316ae815@marliere.net
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Now that the driver core can properly handle constant struct bus_type,
move the counter_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240204-bus_cleanup-counter-v1-1-cef9dd719bdc@marliere.net
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Remove the @priv: line to prevent the kernel-doc warning:
include/linux/counter.h:400: warning: Excess struct member 'priv' description in 'counter_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: f2ee4759fb ("counter: remove old and now unused registration API")
Link: https://lore.kernel.org/r/20231223050511.13849-1-rdunlap@infradead.org
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
In order to prevent mptcpify prog from affecting the running results
of other BPF tests, a pid limit was added to restrict it from only
modifying its own program.
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/8987e2938e15e8ec390b85b5dcbee704751359dc.1712054986.git.tanggeliang@kylinos.cn
If user request --no-msr or is not able to access the MSRs,
turbostat should clear all the counters added with --add.
Because MSR access permission checks are done after the cmdline is
parsed, the decision has to be defered up until the transition into
no-msr mode happen.
Signed-off-by: Len Brown <len.brown@intel.com>
Checking early if the permissions are even needed gets rid of the
warnings about some of them missing. Earlier we issued a warning in case
of missing MSR and/or perf permissions, even when user never asked for
counters that require those.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
To allow unprivileged user to run turbostat seamlessly.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
By using the perf API we spend less time in between the reads of the
counters, resulting in more accurate calculations of the dependent
metrics.
Using perf API is also usually faster overall, although cache miss, if
we get one, is more costly when using perf vs MSR driver.
We would fallback to the msr reads if the sysfs isn't there or when in
--no-perf mode.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add the --no-perf option to allow users to run turbostat without
accessing perf.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Add --no-msr option to allow users to run turbostat without
accessing MSRs via the MSR driver.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Reviewed-by: Len Brown <len.brown@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Eliminate redundant debug output for core and package scope counters.
Include name and path for all "ADDED" counters.
Signed-off-by: Len Brown <len.brown@intel.com>
Previously a failed read of /dev/cpu_dma_latency erroneously complained
turbostat: capget(CAP_SYS_ADMIN) failed, try "# setcap cap_sys_admin=ep ./turbostat
This went unnoticed because this file is typically visible to root,
and turbostat was typically run as root.
Going forward, when a non-root user can run turbostat...
Complain about failed read access to this file only if --debug is used.
Signed-off-by: Len Brown <len.brown@intel.com>
If MSRs cannot be read, values can be obtained from cpuid.
Signed-off-by: Patryk Wlazlyn <patryk.wlazlyn@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
There are lots of maintainers "pings" during the merge window, even
for trivial patches.
Clarify that contributors should not expect progress on *any*
non-urgent patches during the merge window. This applies to all
contributions, not just large ones.
Clarify the language around -rc1. Trees really are closed during the
merge window.
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20240322183403.67BAEEFE%40davehans-spike.ostc.intel.com
Commit 20d59ee551 ("libbpf: add bpf_core_cast() macro") added a
bpf_helpers include in bpf_core_read.h as a system include. Usually, the
includes are local, though, like in bpf_tracing.h. This commit adjusts
the include to be local as well.
Signed-off-by: Tobias Böhm <tobias@aibor.de>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/q5d5bgc6vty2fmaazd5e73efd6f5bhiru2le6fxn43vkw45bls@fhlw2s5ootdb
- Ensure perf events programmed to count during guest execution
are actually enabled before entering the guest in the nVHE
configuration.
- Restore out-of-range handler for stage-2 translation faults.
- Several fixes to stage-2 TLB invalidations to avoid stale
translations, possibly including partial walk caches.
- Fix early handling of architectural VHE-only systems to ensure E2H is
appropriately set.
- Correct a format specifier warning in the arch_timer selftest.
- Make the KVM banner message correctly handle all of the possible
configurations.
-----BEGIN PGP SIGNATURE-----
iI0EABYIADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCZgtpWBccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFoilAQCQk6kLIeuih5QOe50fK4XkNsyg
PGcxw0a0BP8cfjtJsgEArwLlfHQOTE4tRWtXyEHvapJfe/bE1hjLmzUJx7BwLQ4=
=6hNq
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.9, part #1
- Ensure perf events programmed to count during guest execution
are actually enabled before entering the guest in the nVHE
configuration.
- Restore out-of-range handler for stage-2 translation faults.
- Several fixes to stage-2 TLB invalidations to avoid stale
translations, possibly including partial walk caches.
- Fix early handling of architectural VHE-only systems to ensure E2H is
appropriately set.
- Correct a format specifier warning in the arch_timer selftest.
- Make the KVM banner message correctly handle all of the possible
configurations.
The node_id for multi-gateway ALH DAI's get overwritten with the
group_id during the DAI copier's ipc_prepare op. So, save the ALH
dai_index during the BE DAI hw_params in the dai_index field of struct
ipc4_copier and use that to set the device ID in the configuration blob.
This will avoid errors during copier init after an xrun.
Note that the dai_index is typically set in topology for DMIC/SSP, but
it's not used for ALH. Reclaiming this dai_index field to store the
node_id does not generate a conflict with topology-defined values.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
With the delayed stops, the xrun handling is problematic: the
applications expects everything to be reset but the firmware and DMA
are still in a PAUSED state.
This patch makes sure the prepare while pending_stop is set is
special-cased.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a state variable to keep track of delayed stops, in case
pcm_ops->platform_stop_during_hw_free is set.
This patch should be iso-functionality, possibly removing no-op
cases. The main purpose of this new state variable is to prepare a
follow-up patch to reset all PCM and DMAs in case of stop/prepare xrun
sequences.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The same sequence is used twice, use common helper.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For some reason the existing code stops on the first error, which
potentially leaves the DMA and widgets in a weird state.
Change to free-up all resources even in case of errors.
Also add a more consistent error handling and logs, with the first
error code returned to the caller.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When an xrun happens, the BE DAI hw_params doesn't get invoked before
the stream restarts with a prepare. In this case, clearing the node ID
when the DAI widget is freed and unprepared will result in an error when
it is re-initialized. In order to avoid this, move the code to clear the
node ID to the BE DAI hw_free op to keep it balanced with the BE DAI
hw_params.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To allow using widget_to_sdev() in other files, move it as static inline
in shared header file.
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The node_id value needs to be handled specifically for ALH.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add intel_alh_id to set the expected gateway node_id in a follow-up
patch.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We've already defined the value for dai_index, let's use it instead of
open-coding the same thing. No functionality change.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We need to be able to set the dai config differently for SoundWire.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_ipc4_dma_config_tlv{} is required for ACE2.x. The patch follow the
convention to set the dma_stream_channel_map.mapping device as
"link_id << 8 | pdi_id".
And the mapping in sof_ipc4_alh_configuration_blob{} should be the same
as dma_stream_channel_map.mapping in sof_ipc4_dma_config{}.
The purposes of device id is to map DMA tlv.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We always use the lowest N channels of stream. So, set ch_mask to
GENMASK(params_channels(params) - 1, 0).
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Each stream needs a dma_config_tlv. We will handle multi dma_config_tlv
in the follow up commits.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This reverts commit f8ba62ac86.
The SoundWire aggregated solution was to use one DMA on multiple links.
But, the solution changed to use one DMA for each link. It means that
we should assign HDaudio stream_tag for each cpu_dai.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240402151828.175002-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
