syzkaller started using corpuses where a BPF tracing program deletes
elements from a sockmap/sockhash map. Because BPF tracing programs can be
invoked from any interrupt context, locks taken during a map_delete_elem
operation must be hardirq-safe. Otherwise a deadlock due to lock inversion
is possible, as reported by lockdep:
CPU0 CPU1
---- ----
lock(&htab->buckets[i].lock);
local_irq_disable();
lock(&host->lock);
lock(&htab->buckets[i].lock);
<Interrupt>
lock(&host->lock);
Locks in sockmap are hardirq-unsafe by design. We expects elements to be
deleted from sockmap/sockhash only in task (normal) context with interrupts
enabled, or in softirq context.
Detect when map_delete_elem operation is invoked from a context which is
_not_ hardirq-unsafe, that is interrupts are disabled, and bail out with an
error.
Note that map updates are not affected by this issue. BPF verifier does not
allow updating sockmap/sockhash from a BPF tracing program today.
Fixes: 604326b41a ("bpf, sockmap: convert to generic sk_msg interface")
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Reported-by: syzbot+bc922f476bd65abbd466@syzkaller.appspotmail.com
Reported-by: syzbot+d4066896495db380182e@syzkaller.appspotmail.com
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: syzbot+d4066896495db380182e@syzkaller.appspotmail.com
Acked-by: John Fastabend <john.fastabend@gmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=d4066896495db380182e
Closes: https://syzkaller.appspot.com/bug?extid=bc922f476bd65abbd466
Link: https://lore.kernel.org/bpf/20240402104621.1050319-1-jakub@cloudflare.com
When we're engaged in local caching of a cifs filesystem, we cannot perform
caching of a partially written cache granule unless we can read the rest of
the granule. This can result in unexpected access errors being reported to
the user.
Fix this by the following: if a file is opened O_WRONLY locally, but the
mount was given the "-o fsc" flag, try first opening the remote file with
GENERIC_READ|GENERIC_WRITE and if that returns -EACCES, try dropping the
GENERIC_READ and doing the open again. If that last succeeds, invalidate
the cache for that file as for O_DIRECT.
Fixes: 70431bfd82 ("cifs: Support fscache indexing rewrite")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
When testing send_signal and stacktrace_build_id_nmi using the riscv sbi
pmu driver without the sscofpmf extension or the riscv legacy pmu driver,
then failures as follows are encountered:
test_send_signal_common:FAIL:perf_event_open unexpected perf_event_open: actual -1 < expected 0
#272/3 send_signal/send_signal_nmi:FAIL
test_stacktrace_build_id_nmi:FAIL:perf_event_open err -1 errno 95
#304 stacktrace_build_id_nmi:FAIL
The reason is that the above pmu driver or hardware does not support
sampling events, that is, PERF_PMU_CAP_NO_INTERRUPT is set to pmu
capabilities, and then perf_event_open returns EOPNOTSUPP. Since
PERF_PMU_CAP_NO_INTERRUPT is not only set in the riscv-related pmu driver,
it is better to skip testing when this capability is set.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240402073029.1299085-1-pulehui@huaweicloud.com
UHBR13.5 is not supported in MTL and also the DP2.1 spec says UHBR13.5
is optional. Hence removing UHBR135 from the supported link rates.
v2: Reframed the commit message and added link to the issue.
Signed-off-by: Arun R Murthy <arun.r.murthy@intel.com>
Fixes: 62618c7f11 ("drm/i915/mtl: C20 PLL programming")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240228144350.3184930-1-arun.r.murthy@intel.com
(cherry picked from commit ddf8a8bbb5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
SMB2_GLOBAL_CAP_ENCRYPTION flag should be used only for 3.0 and
3.0.2 dialects. This flags set cause compatibility problems with
other SMB clients.
Reported-by: James Christopher Adduono <jc@adduono.com>
Tested-by: James Christopher Adduono <jc@adduono.com>
Cc: stable@vger.kernel.org
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
If installing malicious ksmbd-tools, ksmbd.mountd can return invalid ipc
response to ksmbd kernel server. ksmbd should validate payload size of
ipc response from ksmbd.mountd to avoid memory overrun or
slab-out-of-bounds. This patch validate 3 ipc response that has payload.
Cc: stable@vger.kernel.org
Reported-by: Chao Ma <machao2019@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When generated BPF skeleton header is included in C++ code base, some
compiler setups will emit warning about using language extensions due to
typeof() usage, resulting in something like:
error: extension used [-Werror,-Wlanguage-extension-token]
obj->struct_ops.empty_tcp_ca = (typeof(obj->struct_ops.empty_tcp_ca))
^
It looks like __typeof__() is a preferred way to do typeof() with better
C++ compatibility behavior, so switch to that. With __typeof__() we get
no such warning.
Fixes: c2a0257c1e ("bpftool: Cast pointers for shadow types explicitly.")
Fixes: 00389c58ff ("bpftool: Add support for subskeletons")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kui-Feng Lee <thinker.li@gmail.com>
Acked-by: Quentin Monnet <qmo@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240401170713.2081368-1-andrii@kernel.org
Currently, cond_break macro uses bytes to encode the may_goto insn.
Patch [1] in llvm implemented may_goto insn in BPF backend.
Replace byte-level encoding with llvm inline asm for better usability.
Using llvm may_goto insn is controlled by macro __BPF_FEATURE_MAY_GOTO.
[1] 0e0bfacff7
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240402025446.3215182-1-yonghong.song@linux.dev
When more than 64 maps are used by a program and its subprograms the
verifier returns -E2BIG. Add a verbose message which highlights the
source of the error and also print the actual limit.
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240402073347.195920-1-aspsk@isovalent.com
In a few places in the bpf uapi headers, EOPNOTSUPP is missing a "P" in
the doc comments. This adds the missing "P".
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240329152900.398260-2-dlechner@baylibre.com
Improve the formatting of the attach flags for cgroup programs in the
relevant man page, and fix typos ("can be on of", "an userspace inet
socket") when introducing that list. Also fix a couple of other trivial
issues in docs.
[ Quentin: Fixed trival issues in bpftool-gen.rst and bpftool-iter.rst ]
Signed-off-by: Rameez Rehman <rameezrehman408@hotmail.com>
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240331200346.29118-4-qmo@kernel.org
As it turns out, the terms in definition lists in the rST file are
already rendered with bold-ish formatting when generating the man pages;
all double-star sequences we have in the commands for the command
description are unnecessary, and can be removed to make the
documentation easier to read.
The rST files were automatically processed with:
sed -i '/DESCRIPTION/,/OPTIONS/ { /^\*/ s/\*\*//g }' b*.rst
Signed-off-by: Rameez Rehman <rameezrehman408@hotmail.com>
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240331200346.29118-3-qmo@kernel.org
The rST manual pages for bpftool would use a mix of tabs and spaces for
indentation. While this is the norm in C code, this is rather unusual
for rST documents, and over time we've seen many contributors use a
wrong level of indentation for documentation update.
Let's fix bpftool's indentation in docs once and for all:
- Let's use spaces, that are more common in rST files.
- Remove one level of indentation for the synopsis, the command
description, and the "see also" section. As a result, all sections
start with the same indentation level in the generated man page.
- Rewrap the paragraphs after the changes.
There is no content change in this patch, only indentation and
rewrapping changes. The wrapping in the generated source files for the
manual pages is changed, but the pages displayed with "man" remain the
same, apart from the adjusted indentation level on relevant sections.
[ Quentin: rebased on bpf-next, removed indent level for command
description and options, updated synopsis, command summary, and "see
also" sections. ]
Signed-off-by: Rameez Rehman <rameezrehman408@hotmail.com>
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240331200346.29118-2-qmo@kernel.org
There is no check for overflow of 'start + len' in blk_ioctl_discard().
Hung task occurs if submit an discard ioctl with the following param:
start = 0x80000000000ff000, len = 0x8000000000fff000;
Add the overflow validation now.
Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240329012319.2034550-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
In null_add_dev(), if an error happen after initializing the resources
for a zoned null block device, we must free these resources before
exiting the function. To ensure this, move the out_cleanup_zone label
after out_cleanup_disk as we jump to this latter label if an error
happens after calling null_init_zoned_dev().
Fixes: e440626b1c ("null_blk: pass queue_limits to blk_mq_alloc_disk")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240330005300.1503252-1-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rather than use the system unbound event workqueue, use an io_uring
specific one. This avoids dependencies with the tty, which also uses
the system_unbound_wq, and issues flushes of said workqueue from inside
its poll handling.
Cc: stable@vger.kernel.org
Reported-by: Rasmus Karlsson <rasmus.karlsson@pajlada.com>
Tested-by: Rasmus Karlsson <rasmus.karlsson@pajlada.com>
Tested-by: Iskren Chernev <me@iskren.info>
Link: https://github.com/axboe/liburing/issues/1113
Signed-off-by: Jens Axboe <axboe@kernel.dk>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces. Also replace an instance of strcpy() which is also
deprecated.
s_volume_ident is a NUL-terminated string which is evident from its
usage in udf_debug:
| udf_debug("volIdent[] = '%s'\n", UDF_SB(sb)->s_volume_ident);
s_volume_ident should also be NUL-padded as it is copied out to
userspace:
| if (copy_to_user((char __user *)arg,
| UDF_SB(inode->i_sb)->s_volume_ident, 32))
| return -EFAULT;
Considering the above, a suitable replacement is `strscpy_pad` [2] due
to the fact that it guarantees both NUL-termination and NUL-padding on
the destination buffer.
To simplify the code, let's use the new 2-argument version of
strscpy_pad() introduced in Commit e6584c3964 ("string: Allow
2-argument strscpy()"). Also zero-allocate @outstr so we can safely use
a non-@ret length argument. This is just in case udf_dstrCS0toChar()
doesn't include the NUL-byte in its return length, we won't truncate
@outstr or write garbage bytes either.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Justin Stitt <justinstitt@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Message-Id: <20240401-strncpy-fs-udf-super-c-v1-1-80cddab7a281@google.com>
Since
32974ad490 ("[IA64] Remove COMPAT_IA32 support")
IA32_STACK_TOP and ia32_setup_arg_pages() are not used anymore.
And
675a081360 ("x86: unify mmap_{32|64}.c")
left behind ia32_pick_mmap_layout() extern declaration.
Remove them all.
[ bp: Massage commit message. ]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230625125411.25840-1-yuehaibing@huawei.com
Devices are enabled by default.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Top-level nodes, not being on MMIO bus, do not have "reg" properties and
should not have unit addresses. Correct their name as well to match
"Generic node names" recommendation from Devicetree specification.
This also fixes dtc W=1 warnings:
cn9130-crb.dtsi:29.35-37.4: Warning (unit_address_vs_reg): /ap0_mmc_vccq@0: node has a unit name, but no reg or ranges property
cn9130-crb.dtsi:39.38-46.4: Warning (unit_address_vs_reg): /cp0_usb3_vbus@1: node has a unit name, but no reg or ranges property
cn9130-crb.dtsi:57.33-65.4: Warning (unit_address_vs_reg): /cp0_sd_vccq@0: node has a unit name, but no reg or ranges property
cn9130-crb.dtsi:67.31-75.4: Warning (unit_address_vs_reg): /cp0_sd_vcc@0: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Top-level nodes, not being on MMIO bus, do not have "reg" properties and
should not have unit addresses. Correct their name as well to match
"Generic node names" recommendation from Devicetree specification.
This also fixes dtc W=1 warnings:
cn9130-db.dtsi:28.11-31.4: Warning (unique_unit_address_if_enabled): /memory@0: duplicate unit-address (also used in node /ap0_sd_vccq@0)
cn9130-db.dtsi:28.11-31.4: Warning (unique_unit_address_if_enabled): /memory@0: duplicate unit-address (also used in node /cp0_usb3_vbus@0)
cn9130-db.dtsi:33.33-40.4: Warning (unique_unit_address_if_enabled): /ap0_sd_vccq@0: duplicate unit-address (also used in node /cp0_usb3_vbus@0)
cn9130-db.dtsi:28.11-31.4: Warning (unique_unit_address_if_enabled): /memory@0: duplicate unit-address (also used in node /cp0_usb3_phy@0)
cn9130-db.dtsi:33.33-40.4: Warning (unit_address_vs_reg): /ap0_sd_vccq@0: node has a unit name, but no reg or ranges property
cn9130-db.dtsi:42.38-49.4: Warning (unit_address_vs_reg): /cp0_usb3_vbus@0: node has a unit name, but no reg or ranges property
cn9130-db.dtsi:51.34-54.4: Warning (unit_address_vs_reg): /cp0_usb3_phy@0: node has a unit name, but no reg or ranges property
cn9130-db.dtsi:56.38-63.4: Warning (unit_address_vs_reg): /cp0_usb3_vbus@1: node has a unit name, but no reg or ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Flash node uses single "partition" node to describe partitions, so
remove deprecated address/size-cells properties to also fix dtc W=1
warnings:
cn9131-db.dtsi:140.10-163.4: Warning (avoid_unnecessary_addr_size): /cp1/config-space@f4000000/spi@700680/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Flash node uses single "partition" node to describe partitions, so
remove deprecated address/size-cells properties to also fix dtc W=1
warnings:
cn9130-db.dtsi:313.10-336.4: Warning (avoid_unnecessary_addr_size): /cp0/config-space@f2000000/spi@700680/flash@0: unnecessary #address-cells/#size-cells without "ranges" or child "reg" property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Correct the IOMMU device node unit address to match "reg" and fix dtc
W=1 warnings:
armada-ap80x.dtsi:64.24-80.6: Warning (simple_bus_reg): /ap807/config-space@f0000000/iommu@5000000: simple-bus unit address format error, expected "100000"
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
This variable has never been used and can be removed to avoid a W=1 warning:
drivers/pinctrl/mvebu/pinctrl-armada-37xx.c:837:6: error: variable 'i' set but not used [-Werror,-Wunused-but-set-variable]
837 | int i = 0;
Fixes: 87466ccd94 ("pinctrl: armada-37xx: Add pin controller support for Armada 37xx")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Message-ID: <20240322132205.906729-1-arnd@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There are 3 places at which the maximum CPU frequency may change,
store_no_turbo(), intel_pstate_update_limits() (when called by the
cpufreq core) and intel_pstate_notify_work() (when handling a HWP
change notification). Currently, cpuinfo.max_freq is only updated by
store_no_turbo() and intel_pstate_notify_work(), although it principle
it may be necessary to update it in intel_pstate_update_limits() either.
Make all of them mutually consistent.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Replace the global.turbo_disabled in __intel_pstate_update_max_freq() with
a global.no_turbo one to make store_no_turbo() actually update the maximum
CPU frequency on the trubo preference changes, which needs to be consistent
with arch_set_max_freq_ratio() called from there.
For more consistency, replace the global.turbo_disabled checks in
__intel_pstate_cpu_init() and intel_cpufreq_adjust_perf() with
global.no_turbo checks either.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Because global.no_turbo is generally not read under intel_pstate_driver_lock
make store_no_turbo() use WRITE_ONCE() for updating it (this is the only
place at which it is updated except for the initialization) and make the
majority of places reading it use READ_ONCE().
Also remove redundant global.turbo_disabled checks from places that
depend on the 'true' value of global.no_turbo because it can only be
'true' if global.turbo_disabled is also 'true'.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Now that global.turbo_disabled can only change at the cpufreq driver
registration time, initialize global.no_turbo at that time too so they
are in sync to start with (if the former is set, the latter cannot be
updated later anyway).
That allows show_no_turbo() to be simlified because it does not need
to check global.turbo_disabled and store_no_turbo() can be rearranged
to avoid doing anything if the new value of global.no_turbo is equal
to the current one and only return an error on attempts to clear
global.no_turbo when global.turbo_disabled.
While at it, eliminate the redundant ret variable from store_no_turbo().
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
The global.turbo_disabled is updated quite often, especially in the
passive mode in which case it is updated every time the scheduler calls
into the driver. However, this is generally not necessary and it adds
MSR read overhead to scheduler code paths (and that particular MSR is
slow to read).
For this reason, make the driver read MSR_IA32_MISC_ENABLE_TURBO_DISABLE
just once at the cpufreq driver registration time and remove all of the
in-flight updates of global.turbo_disabled.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fold intel_pstate_max_within_limits() into its only caller.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
There are at least 3 variables in intel_pstate that do not get updated
after they have been initialized, so annotate them with __ro_after_init.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Drop two redundant checks involving READ_ONCE() from notify_hwp_interrupt()
and make it check hwp_active without READ_ONCE() which is not necessary,
because that variable is only set once during the early initialization of
the driver.
In order to make that clear, annotate hwp_active with __ro_after_init.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Make intel_pstate_disable_hwp_interrupt() wait for canceled delayed work
to complete to avoid leftover work items running when it returns which
may be during driver unregistration and may confuse things going forward.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Because intel_pstate_enable/disable_hwp_interrupt() are only called from
thread context, they need not save the IRQ flags when using a spinlock
as interrupts are guaranteed to be enabled when they run, so make them
use spin_lock/unlock_irq().
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Remove the spinlock locking from intel_pstate_driver_cleanup() as it is
not necessary because no other code accessing all_cpu_data[] can run in
parallel with that function.
Had the locking been necessary, though, it would have been incorrect
because the lock in question is acquired from a hardirq handler and
it cannot be acquired from thread context without disabling interrupts.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Merge the mmc fixes for v6.9-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.10.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Modules registering driver with sdio_register_driver() might
forget to set .owner field. The field is used by some of other kernel
parts for reference counting (try_module_get()), so it is expected that
drivers will set it.
Solve the problem by moving this task away from the drivers to the core
code, just like we did for platform_driver in
commit 9447057eaf ("platform_device: use a macro instead of
platform_driver_register").
Since many drivers forget to set the .owner, this effectively will fix
them. Examples of fixed drivers are: ath6kl, b43, btsdio.c, ks7010,
libertas, MediaTek WiFi drivers, Realtek WiFi drivers, rsi, siano,
wilc1000, wl1251 and more.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240329-module-owner-sdio-v1-1-e4010b11ccaa@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
d7133797e9 ("mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter
ASPM L1.2") and 36ed2fd32b ("mmc: sdhci-pci-gli: A workaround to allow
GL9755 to enter ASPM L1.2") added writes to the Control register in the
Power Management Capability to put the device in D3hot and back to D0.
Use the pci_set_power_state() interface instead because these are generic
operations that don't need to be driver-specific. Also, the PCI spec
requires some delays after these power transitions, and
pci_set_power_state() takes care of those, while d7133797e9 and
36ed2fd32b did not.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Link: https://lore.kernel.org/r/20240327214831.1544595-3-helgaas@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
015c9cbcf0 ("mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of
AER") added PCI_GLI_9750_CORRERR_MASK, the offset of the AER Capability in
config space, and PCI_GLI_9750_CORRERR_MASK_REPLAY_TIMER_TIMEOUT, the
Replay Timer Timeout bit in the AER Correctable Error Status register.
Use pci_find_ext_capability() to locate the AER Capability and use the
existing PCI_ERR_COR_REP_TIMER definition to mask the bit.
This removes a little bit of unnecessarily device-specific code and makes
AER-related things more greppable.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20240327214831.1544595-2-helgaas@kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Convert the existing symbolic permissions to the octal presentation as
this is the preferred representation for debugfs permissions.
Signed-off-by: Rouven Czerwinski <r.czerwinski@pengutronix.de>
Link: https://lore.kernel.org/r/20240326094215.212930-1-r.czerwinski@pengutronix.de
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
