Dynamic attributes are not passed from any caller of
edac_device_alloc_ctl_info(). Drop this unused/untested functionality
completely.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240213112051.27715-5-jirislaby@kernel.org
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Commit
cfe40fdb4a ("amd64_edac: add driver header")
added amd64_pvt struct with ext_nbcfg in it. But no one used that member
since then.
Therefore, remove it.
Found by https://github.com/jirislaby/clang-struct.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20240213112051.27715-2-jirislaby@kernel.org
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
There are one or two cases where CREATE_SESSION returns
NFS4ERR_DELAY in order to force the client to wait a bit and try
CREATE_SESSION again. However, after commit e4469c6cc6 ("NFSD: Fix
the NFSv4.1 CREATE_SESSION operation"), NFSD caches that response in
the CREATE_SESSION slot. Thus, when the client resends the
CREATE_SESSION, the server always returns the cached NFS4ERR_DELAY
response rather than actually executing the request and properly
recording its outcome. This blocks the client from making further
progress.
RFC 8881 Section 15.1.1.3 says:
> If NFS4ERR_DELAY is returned on an operation other than SEQUENCE
> that validly appears as the first operation of a request ... [t]he
> request can be retried in full without modification. In this case
> as well, the replier MUST avoid returning a response containing
> NFS4ERR_DELAY as the response to an initial operation of a request
> solely on the basis of its presence in the reply cache.
Neither the original NFSD code nor the discussion in section 18.36.4
refer explicitly to this important requirement, so I missed it.
Note also that not only must the server not cache NFS4ERR_DELAY, but
it has to not advance the CREATE_SESSION slot sequence number so
that it can properly recognize and accept the client's retry.
Reported-by: Dai Ngo <dai.ngo@oracle.com>
Fixes: e4469c6cc6 ("NFSD: Fix the NFSv4.1 CREATE_SESSION operation")
Tested-by: Dai Ngo <dai.ngo@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
fscache emits a lot of duplicate cookie warnings with cifs because the
index key for the fscache cookies does not include everything that the
cifs_find_inode() function does. The latter is used with iget5_locked() to
distinguish between inodes in the local inode cache.
Fix this by adding the creation time and file type to the fscache cookie
key.
Additionally, add a couple of comments to note that if one is changed the
other must be also.
Signed-off-by: David Howells <dhowells@redhat.com>
Fixes: 70431bfd82 ("cifs: Support fscache indexing rewrite")
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Rohith Surabattula <rohiths.msft@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
- tracing/probes: initialize a 'val' local variable with zero. This variable
is read by FETCH_OP_ST_EDATA in a loop, and is expected to be initialized
by FETCH_OP_ARG in the same loop. Since this expectation is not obvious,
thus smatch warns it. Initializing 'val' with zero fixes this warning.
-----BEGIN PGP SIGNATURE-----
iQFPBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmYEKw4bHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bZmkH/2TNnrQivrNEyihXaZNC
i4kyOGiNpIKi1BvE2nBFItqMlKbry+bR74tgk9+9BZiwjnTSz+pVDsWuOrSvrLNy
j9yOjqZMdEnx7YdSZX+HUxpXzklSyAd1PQ0kEOYHRgqcXgcUEYSaHPpZZJqBtIah
X/4rmLyMTFE2CdbdJ+dfPn9GLn0C9TP+jGz0DC/efEXdXJ3bVY2d3DJXHNiVpW58
4Yy0UWwUu/QAk2JGUf1r3GEwoklKNNjvGLaCMm4mAoY3haDzfbGecstAB4cc/gD/
FzN2q+7Z7RgJloICJo1Bh91AWi06+EeFFk6MZ5oHzjsp7EH/aGCy5umEsIPGjHr4
Y0Q=
=b4J5
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fixlet from Masami Hiramatsu:
- tracing/probes: initialize a 'val' local variable with zero.
This variable is read by FETCH_OP_ST_EDATA in a loop, and is
initialized by FETCH_OP_ARG in the same loop. Since this
initialization is not obvious, smatch warns about it.
Explicitly initializing 'val' with zero fixes this warning.
* tag 'probes-fixes-v6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: probes: Fix to zero initialize a local variable
- Fix selftests to conform to the TAP output format (Muhammad Usama Anjum)
- Fix NOMMU linux_binprm::exec pointer in auxv (Max Filippov)
- Replace deprecated strncpy usage (Justin Stitt)
- Replace another /bin/sh instance in selftests
-----BEGIN PGP SIGNATURE-----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=Siss
-----END PGP SIGNATURE-----
Merge tag 'execve-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve fixes from Kees Cook:
- Fix selftests to conform to the TAP output format (Muhammad Usama
Anjum)
- Fix NOMMU linux_binprm::exec pointer in auxv (Max Filippov)
- Replace deprecated strncpy usage (Justin Stitt)
- Replace another /bin/sh instance in selftests
* tag 'execve-v6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
binfmt: replace deprecated strncpy
exec: Fix NOMMU linux_binprm::exec in transfer_args_to_stack()
selftests/exec: Convert remaining /bin/sh to /bin/bash
selftests/exec: execveat: Improve debug reporting
selftests/exec: recursion-depth: conform test to TAP format output
selftests/exec: load_address: conform test to TAP format output
selftests/exec: binfmt_script: Add the overall result line according to TAP
This patch re-introduces protection against the size of access to stack
memory being negative; the access size can appear negative as a result
of overflowing its signed int representation. This should not actually
happen, as there are other protections along the way, but we should
protect against it anyway. One code path was missing such protections
(fixed in the previous patch in the series), causing out-of-bounds array
accesses in check_stack_range_initialized(). This patch causes the
verification of a program with such a non-sensical access size to fail.
This check used to exist in a more indirect way, but was inadvertendly
removed in a833a17aea.
Fixes: a833a17aea ("bpf: Fix verification of indirect var-off stack access")
Reported-by: syzbot+33f4297b5f927648741a@syzkaller.appspotmail.com
Reported-by: syzbot+aafd0513053a1cbf52ef@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/bpf/CAADnVQLORV5PT0iTAhRER+iLBTkByCYNBYyvBSgjN1T31K+gOw@mail.gmail.com/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Link: https://lore.kernel.org/r/20240327024245.318299-3-andreimatei1@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch adds a missing check to bloom filter creating, rejecting
values above KMALLOC_MAX_SIZE. This brings the bloom map in line with
many other map types.
The lack of this protection can cause kernel crashes for value sizes
that overflow int's. Such a crash was caught by syzkaller. The next
patch adds more guard-rails at a lower level.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240327024245.318299-2-andreimatei1@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Commit 576882ef5e ("uio: introduce UIO_MEM_DMA_COHERENT type")
introduced a new use-case for 'struct uio_mem' where the 'mem' field now
contains a kernel virtual address when 'memtype' is set to
UIO_MEM_DMA_COHERENT.
That in turn causes build errors, because 'mem' is of type
'phys_addr_t', and a virtual address is a pointer type. When the code
just blindly uses cast to mix the two, it caused problems when
phys_addr_t isn't the same size as a pointer - notably on 32-bit
architectures with PHYS_ADDR_T_64BIT.
The proper thing to do would probably be to use a union member, and not
have any casts, and make the 'mem' member be a union of 'mem.physaddr'
and 'mem.vaddr', based on 'memtype'.
This is not that proper thing. This is just fixing the ugly casts to be
even uglier, but at least not cause build errors on 32-bit platforms
with 64-bit physical addresses.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 576882ef5e ("uio: introduce UIO_MEM_DMA_COHERENT type")
Fixes: 7722151e46 ("uio_pruss: UIO_MEM_DMA_COHERENT conversion")
Fixes: 019947805a ("uio_dmem_genirq: UIO_MEM_DMA_COHERENT conversion")
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Chris Leech <cleech@redhat.com>
Cc: Nilesh Javali <njavali@marvell.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linuxfoundation.org>
If the clk ops.open() function returns an error, we don't release the
pccontext we allocated for this clock.
Re-organize the code slightly to make it all more obvious.
Reported-by: Rohit Keshri <rkeshri@redhat.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Fixes: 60c6946675 ("posix-clock: introduce posix_clock_context concept")
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linuxfoundation.org>
With [1], crash dump specific code is moved out of CONFIG_KEXEC_CORE
and placed under CONFIG_CRASH_DUMP, where it is more appropriate.
And since CONFIG_KEXEC & !CONFIG_CRASH_DUMP build option is supported
with that, it led to the below warning:
"WARN: resolve_btfids: unresolved symbol crash_kexec"
Fix it by using the appropriate #ifdef.
[1] https://lore.kernel.org/all/20240124051254.67105-1-bhe@redhat.com/
Acked-by: Baoquan He <bhe@redhat.com>
Fixes: 02aff84805 ("crash: split crash dumping code out from kexec_core.c")
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Link: https://lore.kernel.org/r/20240319080152.36987-1-hbathini@linux.ibm.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The ACPI IRQ mapping code supports parsing of ResourceSource,
but this is not reported thru _OSC.
Fix this by setting bit 13 ("Interrupt ResourceSource support")
when evaluating _OSC.
Fixes: d44fa3d460 ("ACPI: Add support for ResourceSource/IRQ domain mapping")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI spec says bit 17 should be used to indicate support
for Generic Initiator Affinity Structure in SRAT, but we currently
set bit 13 ("Interrupt ResourceSource support").
Fix this by actually setting bit 17 when evaluating _OSC.
Fixes: 01aabca2fd ("ACPI: Let ACPI know we support Generic Initiator Affinity Structures")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A device driver for the Generic Event Device (ACPI0013) already
exists for quite some time, but support for it was never reported
thru _OSC.
Fix this by setting bit 11 ("Generic Event Device support") when
evaluating _OSC.
Fixes: 3db80c230d ("ACPI: implement Generic Event Device")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The code responsible for parsing the available p-states should
have no problems handling more than 16 p-states.
Indicate this by setting bit 10 ("Greater Than 16 p-state support")
when evaluating _OSC.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The ACPI thermal driver already uses the _TPF ACPI method to retrieve
precise sampling time values, but this is not reported thru _OSC.
Fix this by setting bit 9 ("Fast Thermal Sampling support") when
evaluating _OSC.
Fixes: a2ee7581af ("ACPI: thermal: Add Thermal fast Sampling Period (_TFP) support")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Few recently introduced structs are named 'nhlt2' instead of 'nhlt' to
avoid naming conflicts. With duplicate types gone, the conflicts are no
more.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 0c7379eae2a0342bfc36d6b7db0bb90ad13a5a3e
There are no users for the duplicated NHLT table components.
Link: https://github.com/acpica/acpica/pull/890
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The table is composed of a range of endpoints with each describing
audio formats they support. Most of the operations involve iterating
over elements of the table and filtering them. Simplify the process by
implementing range of getters.
While the acpi_nhlt_endpoint_mic_count() stands out a bit, it is a
critical component for any AudioDSP driver to know how many digital
microphones it is dealing with.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 32260f5ce519e854546ce907fc0cc449e1fe51fe
Non HDAudio Link Table (NHLT) is designed to separate hardware-related
description (registers) from AudioDSP firmware-related one i.e.:
pipelines and modules that together make up the audio stream on Intel
DSPs. This task is important as same set of hardware registers can be
used with different topologies and vice versa, same topology could be
utilized with different set of hardware. As the hardware registers
description is directly tied to specific platform, intention is to have
such description part of low-level firmware e.g.: BIOS.
The initial design has been provided in early Sky Lake (SKL) days. The
audio architecture goes by the name cAVS. SKL is a representative of
cAVS 1.5. The table helps describe endpoint capabilities ever since.
While Raptor Lake (RPL) is the last of cAVS architecture - cAVS 2.5 to
be precise - its successor, the ACE architecture which begun with
Meteor Lake (MTL) inherited the design for all I2S and PDM
configurations. These two configurations are the primary targets for
NHLT table.
Due to naming conflicts with existing code, several structs are named
'nhlt2' rather than 'nhlt'. Follow up changes clean this up once
existing code has no users and is removed.
Link: https://github.com/acpica/acpica/pull/912
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The issue occurs when the devfreq cooling device uses the EM power model
and the get_real_power() callback is provided by the driver.
The EM power table is sorted ascending，can't index the table by cooling
device state，so convert cooling state to performance state by
dfc->max_state - dfc->capped_state.
Fixes: 615510fe13 ("thermal: devfreq_cooling: remove old power model and use EM")
Cc: 5.11+ <stable@vger.kernel.org> # 5.11+
Signed-off-by: Ye Zhang <ye.zhang@rock-chips.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
platform_pci_wakeup_init() was removed by d2e5f0c16a ("ACPI / PCI: Rework
the setup and cleanup of device wakeup") but was still mentioned in the
documentation.
Update the doc to refer to pci_acpi_setup(), which does the equivalent
work.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When driver use the cpufreq_frequency_table_verify() as the
cpufreq_driver->verify's callback. It may cause the policy->max
bigger than the freq_qos's max freq.
Just as follow:
unisoc:/sys/devices/system/cpu/cpufreq/policy0 # cat scaling_available_frequencies
614400 768000 988000 1228800 1469000 1586000 1690000 1833000 2002000 2093000
unisoc:/sys/devices/system/cpu/cpufreq/policy0 # echo 1900000 > scaling_max_freq
unisoc:/sys/devices/system/cpu/cpufreq/policy0 # echo 1900000 > scaling_min_freq
unisoc:/sys/devices/system/cpu/cpufreq/policy0 # cat scaling_max_freq
2002000
unisoc:/sys/devices/system/cpu/cpufreq/policy0 # cat scaling_min_freq
2002000
When user set the qos_min and qos_max as the same value, and the value
is not in the freq-table, the above scenario will occur.
This is because in cpufreq_frequency_table_verify() func, when it can not
find the freq in table, it will change the policy->max to be a bigger freq,
as above, because there is no 1.9G in the freq-table, the policy->max would
be set to 2.002G. As a result, the cpufreq_policy->max is bigger than the
user's qos_max. This is unreasonable.
So use a smaller freq when can not find the freq in fre-table, to prevent
the policy->max exceed the qos's max freq.
Signed-off-by: Xuewen Yan <xuewen.yan@unisoc.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Due to a hardware defect in GL975x, config accesses when ASPM is enabled
frequently cause Replay Timer Timeouts in the Port leading to the device.
These are Correctable Errors, so the Downstream Port logs it in its AER
Correctable Error Status register and, when the error is not masked, sends
an ERR_COR message upstream. The message terminates at a Root Port, which
may generate an AER interrupt so the OS can log it.
The Correctable Error logging is an annoyance but not a major issue itself.
But when the AER interrupt happens during suspend, it can prevent the
system from suspending.
015c9cbcf0 ("mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of
AER") masked these errors in the GL975x itself.
Mask these errors in the Port leading to GL975x as well. Note that Replay
Timer Timeouts will still be logged in the AER Correctable Error Status
register, but they will not cause AER interrupts.
Link: https://lore.kernel.org/r/20240327024509.1071189-1-kai.heng.feng@canonical.com
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
[bhelgaas: commit log, update dmesg note]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Victor Shih <victor.shih@genesyslogic.com.tw>
Cc: Ben Chuang <benchuanggli@gmail.com>
When keeping the upper end of a cache block entry, the entry[] array
must be indexed by the offset from the base register of the block,
i.e. max - mas.index.
The code was indexing entry[] by only the register address, leading
to an out-of-bounds access that copied some part of the kernel
memory over the cache contents.
This bug was not detected by the regmap KUnit test because it only
tests with a block of registers starting at 0, so mas.index == 0.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f033c26de5 ("regmap: Add maple tree based register cache")
Link: https://msgid.link/r/20240327114406.976986-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP PDM configuration has to be verified for all combinations.
Remove FLAG_AMD_LEGACY_ONLY_DMIC check.
Fixes: 3a94c8ad0a ("ASoC: amd: acp: add code for scanning acp pdm controller")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240327104657.3537664-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTFp0I1jqZrAX+hPRXbK58LschIgwUCZgHylwAKCRDbK58LschI
gzmaAPwKhDFFSU/DU08k22muJxLIXVR7Xx04baJ9mPiFrqZyyAEA8RFNamC7wZIB
AnfwwoDjfDTP60rlXFaEf8UT5PpA7Ao=
=/KF6
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:
====================
pull-request: bpf-next 2024-03-25
We've added 38 non-merge commits during the last 13 day(s) which contain
a total of 50 files changed, 867 insertions(+), 274 deletions(-).
The main changes are:
1) Add the ability to specify and retrieve BPF cookie also for raw
tracepoint programs in order to ease migration from classic to raw
tracepoints, from Andrii Nakryiko.
2) Allow the use of bpf_get_{ns_,}current_pid_tgid() helper for all
program types and add additional BPF selftests, from Yonghong Song.
3) Several improvements to bpftool and its build, for example, enabling
libbpf logs when loading pid_iter in debug mode, from Quentin Monnet.
4) Check the return code of all BPF-related set_memory_*() functions during
load and bail out in case they fail, from Christophe Leroy.
5) Avoid a goto in regs_refine_cond_op() such that the verifier can
be better integrated into Agni tool which doesn't support backedges
yet, from Harishankar Vishwanathan.
6) Add a small BPF trie perf improvement by always inlining
longest_prefix_match, from Jesper Dangaard Brouer.
7) Small BPF selftest refactor in bpf_tcp_ca.c to utilize start_server()
helper instead of open-coding it, from Geliang Tang.
8) Improve test_tc_tunnel.sh BPF selftest to prevent client connect
before the server bind, from Alessandro Carminati.
9) Fix BPF selftest benchmark for older glibc and use syscall(SYS_gettid)
instead of gettid(), from Alan Maguire.
10) Implement a backward-compatible method for struct_ops types with
additional fields which are not present in older kernels,
from Kui-Feng Lee.
11) Add a small helper to check if an instruction is addr_space_cast
from as(0) to as(1) and utilize it in x86-64 JIT, from Puranjay Mohan.
12) Small cleanup to remove unnecessary error check in
bpf_struct_ops_map_update_elem, from Martin KaFai Lau.
13) Improvements to libbpf fd validity checks for BPF map/programs,
from Mykyta Yatsenko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (38 commits)
selftests/bpf: Fix flaky test btf_map_in_map/lookup_update
bpf: implement insn_is_cast_user() helper for JITs
bpf: Avoid get_kernel_nofault() to fetch kprobe entry IP
selftests/bpf: Use start_server in bpf_tcp_ca
bpf: Sync uapi bpf.h to tools directory
libbpf: Add new sec_def "sk_skb/verdict"
selftests/bpf: Mark uprobe trigger functions with nocf_check attribute
selftests/bpf: Use syscall(SYS_gettid) instead of gettid() wrapper in bench
bpf-next: Avoid goto in regs_refine_cond_op()
bpftool: Clean up HOST_CFLAGS, HOST_LDFLAGS for bootstrap bpftool
selftests/bpf: scale benchmark counting by using per-CPU counters
bpftool: Remove unnecessary source files from bootstrap version
bpftool: Enable libbpf logs when loading pid_iter in debug mode
selftests/bpf: add raw_tp/tp_btf BPF cookie subtests
libbpf: add support for BPF cookie for raw_tp/tp_btf programs
bpf: support BPF cookie in raw tracepoint (raw_tp, tp_btf) programs
bpf: pass whole link instead of prog when triggering raw tracepoint
bpf: flatten bpf_probe_register call chain
selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh
selftests/bpf: Add a sk_msg prog bpf_get_ns_current_pid_tgid() test
...
====================
Link: https://lore.kernel.org/r/20240325233940.7154-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Document already upstreamed and used Qualcomm SM6125 UFS host controller to fix
dtbs_check warnings like:
sm6125-xiaomi-laurel-sprout.dtb: ufs@4804000: compatible:0: 'qcom,sm6125-ufshc' is not one of ['qcom,msm8994-ufshc', ...
sm6125-xiaomi-laurel-sprout.dtb: ufs@4804000: Unevaluated properties are not allowed ('compatible' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Martin Botka <martin.botka@somainline.org>
Link: https://lore.kernel.org/r/20240326174632.209745-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Document already upstreamed and used Qualcomm SC7180 UFS host controller
to fix dtbs_check warnings like:
sc7180-idp.dtb: ufshc@1d84000: compatible:0: 'qcom,sc7180-ufshc' is not one of ...
sc7180-idp.dtb: ufshc@1d84000: clocks: [[39, 99], [39, 7], [39, 98], [39, 107], [36, 0], [39, 106], [39, 105]] is too short
sc7180-idp.dtb: ufshc@1d84000: clock-names: ['core_clk', 'bus_aggr_clk', 'iface_clk', 'core_clk_unipro', ...] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240326174632.209745-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Document already upstreamed and used Qualcomm SC8180x UFS host
controller to fix dtbs_check warnings like:
sc8180x-primus.dtb: ufshc@1d84000: compatible:0: 'qcom,sc8180x-ufshc' is not one of ['qcom,msm8994-ufshc', ... ]
sc8180x-primus.dtb: ufshc@1d84000: Unevaluated properties are not allowed ('compatible' was unexpected)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240326174632.209745-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
As I-Cache flush on current RISC-V needs to send IPIs to every CPU cores
in the system is very costly, limiting flush_icache_mm to be called only
when vma->vm_flags has VM_EXEC can help minimize the frequency of these
operations. It improves performance and reduces disturbances when
copy_from_user_page is needed such as profiling with perf.
For I-D coherence concerns, it will not fail if such a page adds VM_EXEC
flags in the future since we have checked it in the __set_pte_at function.
Signed-off-by: Yangyu Chen <cyy@cyyself.name>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/tencent_6D851035F6F2FD0B5A69FB391AE39AC6300A@qq.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
arch/riscv/kernel/sys_riscv.c builds without using anything
from asm-generic/mman-common.h. There seems to be no reason
to include this file.
Signed-off-by: Tanzir Hasan <tanzirh@google.com>
Fixes: 9e2e6042a7 ("riscv: Allow PROT_WRITE-only mmap()")
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20231212-removeasmgeneric-v2-1-a0e6d7df34a7@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Commit 3a6dd5f614 ("riscv: remove unneeded #include
<asm-generic/export.h>") removed the last use of
include/asm-generic/export.h.
This deprecated header can go away.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20240323090615.1244904-1-masahiroy@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
In arch/riscv/Makefile, KBUILD_IMAGE is assigned in two separate
if-blocks.
When CONFIG_XIP_KERNEL is disabled, the decision made by the first
if-block is overwritten by the second one, which is redundant and
unreadable.
Merge the two if-blocks.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20240323113500.1249272-1-masahiroy@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
commit cca98e9f8b ("mm: enforce that vmap can't map pages
executable") enforces the W^X protection by not allowing remapping
existing pages as executable. Add riscv bits so that riscv can benefit
the same protection.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231121160637.3856-1-jszhang@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
psvt->limit.string can only be 8 bytes so let's use the appropriate size
macro ACPI_LIMIT_STR_MAX_LEN.
Neither psvt->limit.string or psvt_user[i].limit.string requires the
NUL-padding behavior that strncpy() provides as they have both been
filled with NUL-bytes prior to the string operation.
| memset(&psvt->limit, 0, sizeof(u64));
and
| psvt_user = kzalloc(psvt_len, GFP_KERNEL);
Let's use `strscpy` [2] due to the fact that it guarantees
NUL-termination on the destination buffer without unnecessarily
NUL-padding.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings # [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Signed-off-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Enable and disable hardware feedback interface (HFI) when user space
handler is present. For example, enable HFI, when intel-speed-select or
Intel Low Power daemon is running and subscribing to thermal netlink
events. When user space handlers exit or remove subscription for
thermal netlink events, disable HFI.
Summary of changes:
- Register a thermal genetlink notifier
- In the notifier, process THERMAL_NOTIFY_BIND and THERMAL_NOTIFY_UNBIND
reason codes to count number of thermal event group netlink multicast
clients. If thermal netlink group has any listener enable HFI on all
packages. If there are no listener disable HFI on all packages.
- When CPU is online, instead of blindly enabling HFI, check if
the thermal netlink group has any listener. This will make sure that
HFI is not enabled by default during boot time.
- Actual processing to enable/disable matches what is done in
suspend/resume callbacks. Create two functions hfi_enable_instance()
and hfi_disable_instance(), which can be called from the netlink
notifier callback and suspend/resume callbacks.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Almost all thermal netlink structures use thermal_genl prefix.
Change thermal_gnl_family name accordingly for consistency.
No functional impact.
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Introduce a new feature to the thermal netlink framework, enabling the
registration of sub drivers to receive events via a notifier mechanism.
Specifically, implement genetlink family bind and unbind callbacks to send
BIND and UNBIND events.
The primary purpose of this enhancement is to facilitate the tracking of
user-space consumers by the Intel HFI driver. By leveraging these
notifications, the driver can determine when consumers are present
or absent.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Anna-Maria and Frederic are working in this area for years. Volunteer them
into co-maintainer roles.
While at it bring the file lists up to date.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240325172048.548199937@linutronix.de
Share same codes with 4.0.5 and enable collaborate mode for VPE.
Signed-off-by: Lang Yu <Lang.Yu@amd.com>
Reviewed-by: Veerabadhran Gopalakrishnan <Veerabadhran.Gopalakrishnan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
