Added a test for bound computation in MUL when non constant
values are used and both registers have bounded ranges.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Link: https://lore.kernel.org/r/20240506141849.185293-7-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
MUL instruction required that src_reg would be a known value (i.e.
src_reg would be a const value). The condition in this case can be
relaxed, since the range computation algorithm used in current code
already supports a proper range computation for any valid range value on
its operands.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Link: https://lore.kernel.org/r/20240506141849.185293-6-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Added a test for bound computation in XOR and OR when non constant
values are used and both registers have bounded ranges.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Link: https://lore.kernel.org/r/20240506141849.185293-5-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Range for XOR and OR operators would not be attempted unless src_reg
would resolve to a single value, i.e. a known constant value.
This condition is unnecessary, and the following XOR/OR operator
handling could compute a possible better range.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Link: https://lore.kernel.org/r/20240506141849.185293-4-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Split range computation checks in its own function, isolating pessimitic
range set for dst_reg and failing return to a single point.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
bpf/verifier: improve code after range computation recent changes.
Link: https://lore.kernel.org/r/20240506141849.185293-3-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In order to further simplify the code in adjust_scalar_min_max_vals all
the calls to mark_reg_unknown are replaced by __mark_reg_unknown.
static void mark_reg_unknown(struct bpf_verifier_env *env,
struct bpf_reg_state *regs, u32 regno)
{
if (WARN_ON(regno >= MAX_BPF_REG)) {
... mark all regs not init ...
return;
}
__mark_reg_unknown(env, regs + regno);
}
The 'regno >= MAX_BPF_REG' does not apply to
adjust_scalar_min_max_vals(), because it is only called from the
following stack:
- check_alu_op
- adjust_reg_min_max_vals
- adjust_scalar_min_max_vals
The check_alu_op() does check_reg_arg() which verifies that both src and
dst register numbers are within bounds.
Signed-off-by: Cupertino Miranda <cupertino.miranda@oracle.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Cc: Yonghong Song <yonghong.song@linux.dev>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: David Faust <david.faust@oracle.com>
Cc: Jose Marchesi <jose.marchesi@oracle.com>
Cc: Elena Zannoni <elena.zannoni@oracle.com>
Cc: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Link: https://lore.kernel.org/r/20240506141849.185293-2-cupertino.miranda@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
and removal of an unused field.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCAAuFiEE7v+35S2Q1vLNA3Lx86Z5yZzRHYEFAmY35dkQHGhlaWtvQHNu
dGVjaC5kZQAKCRDzpnnJnNEdgR33B/4q1lD4gyPSFHGI1pox23JXHjaBDCz/1/8S
CpIY7H7KY3QQkfJVqoO5mmI5gG9XkurHSEdITVoGEo+M3rqM9yhuuoraxvDKHX4n
NOuPpir0Y6bFl5IMr3tgtl/kbXCG/JIFCGmZfG218Qlsy/jm+xHWVAg+2CI5GRZ/
qKH705SPSTSuQnyATzydG/QiCIBiJmFsK0W61wzT4T/luR5iUN2ZvrrRmSy4WABi
k/A/wMeeqHE7qnnbmjprvJJbaaHPCfImPreSPXY0NZ48Fmq8pDlm/M7JhBV92NVI
Z7VJ516aJ+RrVm3bSTBij/21eeMrCdKid+jTJZ73NshrHBrfTaLl
=hTlC
-----END PGP SIGNATURE-----
Merge tag 'v6.10-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-rockchip
Pull some small Rockchip clk driver updates from Heiko Stuebner:
- A new PLL rate and missing mux on rk3568
- A missing reset line on rk3588
- Removal of an unused field in struct rockchip_mmc_clock
* tag 'v6.10-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: rk3568: Add PLL rate for 724 MHz
clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
clk: rockchip: rk3588: Add reset line for HDMI Receiver
clk: rockchip: rk3568: Add missing USB480M_PHY mux
dt-bindings: reset: Define reset id used for HDMI Receiver
dt-bindings: clock: rockchip: add USB480M_PHY mux
This allows to define a GTP tunnel for dual stack MS/UE with both IPv4
and IPv6 addresses while using the same TEID via two PDP context
objects.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add new protocol field to PDP context that determines the transmit path
IP protocol to encapsulate the original packets, either IPv4 or IPv6.
Relax existing netlink attribute checks to allow to specify different
family in MS and peer attributes from the control plane.
Use build helpers to tx path to encapsulate IPv4-in-IPv6-GTP and
IPv6-in-IPv4-GTP according to the user-specified configuration.
From rx path, snoop for the inner protocol header since outer
skb->protocol might differ and use this to validate for valid PDP
context and to restore skb->protocol after decapsulation.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add routine to attach an IPv6 route for the encapsulated packet, deal
with Path MTU and push GTP header.
This helper function will be used to deal with IPv4-in-IPv6-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add routine to attach an IPv4 route for the encapsulated packet, deal
with Path MTU and push GTP header.
This helper function will be used to deal with IPv6-in-IPv4-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Based on the idea that ip_tunnel_get_dsfield() provides the tos field
regardless the IP version, use either iph->tos or ipv6_get_dsfield().
This comes in preparation to support for IPv4-in-IPv6-GTP and
IPv6-in-IPv4-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Move debugging to the routine to build GTP packets in preparation
for supporting IPv4-in-IPv6-GTP and IPv6-in-IPv4-GTP.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
According to TS 29.061, it is possible to see IPv6 link-local traffic in
the GTP tunnel, see 11.2.1.3.2 IPv6 Stateless Address Autoconfiguration
(IPv6 SLAAC).
Pass up these packets to the userspace daemon to handle them as control
GTP traffic.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Harald Welte reports that according to 3GPP TS 29.060:
PDN Connection: the association between a MS represented by one IPv4
address and/or one IPv6 prefix and a PDN represented by an APN.
this clearly states that IPv4 is a single address while IPv6 is a single prefix.
Then, 3GPP TS 29.061, Section 11.2.1.3:
For APNs that are configured for IPv6 address allocation, the GGSN/P-GW
shall only use the Prefix part of the IPv6 address for forwarding of mobile
terminated IP packets. The size of the prefix shall be according to the maximum
prefix length for a global IPv6 address as specified in the IPv6 Addressing
Architecture, see RFC 4291 [82].
RFC 4291 section 2.5.4 states
All Global Unicast addresses other than those that start with binary 000
have a 64-bit interface ID field (i.e., n + m = 64) ...
3GPP TS 29.61 Section 11.2.1.3.2a:
In the procedure in the cases of using GTP-based S5/S8, P-GW acts as an
access router, and allocates to a UE a globally unique /64 IPv6 prefix if the
PLMN allocates the prefix.
Therefore, compare IPv6 address /64 prefix only since MS/UE is not a single
address like in the IPv4 case.
Reject IPv6 address with EADDRNOTAVAIL if it lower 64 bits of the IPv6 address
from the control plane are set.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add new iflink attributes to configure in-kernel UDP listener socket
address: IFLA_GTP_LOCAL and IFLA_GTP_LOCAL6. If none of these attributes
are specified, default is still to IPv4 INADDR_ANY for backward
compatibility.
Add new attributes to set up family and IPv6 address of GTP tunnels:
GTPA_FAMILY, GTPA_PEER_ADDR6 and GTPA_MS_ADDR6. If no GTPA_FAMILY is
specified, AF_INET is assumed for backward compatibility.
setsockopt IPV6_ADDRFORM allows to downgrade socket from IPv6 to IPv4
after socket is bound. Assumption is that socket listener that is
attached to the gtp device needs to be either IPv4 or IPv6. Therefore,
GTP socket listener does not allow for IPv4-mapped-IPv6 listener.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Currently GTP packets are dropped if the next extension field is set to
non-zero value, but this are valid GTP packets.
TS 29.281 provides a longer header format, which is defined as struct
gtp1_header_long. Such long header format is used if any of the S, PN, E
flags is set.
This long header is 4 bytes longer than struct gtp1_header, plus
variable length (optional) extension headers. The next extension header
field is zero is no extension header is provided.
The extension header is composed of a length field which includes total
number of 4 byte words including the extension header itself (1 byte),
payload (variable length) and next type (1 byte). The extension header
size and its payload is aligned to 4 bytes.
A GTP packet might come with a chain extensions headers, which makes it
slightly cumbersome to parse because the extension next header field
comes at the end of the extension header, and there is a need to check
if this field becomes zero to stop the extension header parser.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Update b20dc3c684 ("gtp: Allow to create GTP device without FDs") to
remove useless initialization to NULL, sockets are initialized to
non-NULL just a few lines of code after this.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
We should not use any CONFIG switches in uapi headers since
these only work during kernel compilation. They are not defined
for userspace. Let's use the __mcoldfire__ switch from the
compiler here instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
In "struct lpc32xx_kscan_drv", the 'irq' field is unused.
Remove it.
Found with cppcheck, unusedStructMember.
While at it, move the 'row_shift' field in order to fill a hole in the
structure (at least on 64 bits arch).
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e006dfb77e35762c6e4f8ba6ba792b0c52fde375.1714545542.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Commit defc9cd826 ("pata_legacy: resychronize with upstream changes and
resubmit") missed to update legacy_exit(), so that it now fails to do any
cleanup -- the loop body there can never be entered. Fix that and finally
remove now useless nr_legacy_host variable...
Found by Linux Verification Center (linuxtesting.org) with the Svace static
analysis tool.
Fixes: defc9cd826 ("pata_legacy: resychronize with upstream changes and resubmit")
Cc: stable@vger.kernel.org
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Add a check for the return value of pci_alloc_irq_vectors() and return
error if it fails.
[jkosina@suse.com: reworded changelog based on Srinivas' suggestion]
Fixes: 74fbc7d371 ("HID: intel-ish-hid: add MSI interrupt support")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
When building either tools/bpf/bpftool, or tools/testing/selftests/hid,
(the same Makefile is used for these), clang generates many instances of
the following:
"clang: warning: -lLLVM-17: 'linker' input unused"
Quentin points out that the LLVM version is only required in $(LIBS),
not in $(CFLAGS), so the fix is to remove it from CFLAGS.
Suggested-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240505230054.13813-1-jhubbard@nvidia.com
This patch enhances the firmware reset handler in the Intel Integrated
Sensor Hub (ISH) driver. Previously, the ISH firmware would send a
MNG_RESET_NOTIFY message in response to an empty IPC message from the
ish_wakeup function. With the introduction of the feature to load ISH
firmware from the host on the LunarLake platform, the ISH bootloader
now involves the IPC function. This results in an additional
MNG_RESET_NOTIFY message being sent by ISH bootloader after power on.
Consequently, the driver receives two MNG_RESET_NOTIFY messages during
system boot up. This can disrupt the dev->dev_state during the first
reset flow due to the subsequent reset notify message.
To address this, the patch modifies the fw_reset_work_fn function to skip
the execution of ishtp_reset_compl_handler during the first reset flow if
a reset is pending. The ishtp_reset_compl_handler will then be executed
during the second reset flow, ensuring the dev->dev_state is not disrupted.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Starting from the Lunar Lake generation, the ISH firmware has been
divided into two components for better space optimization and increased
flexibility. These components include a bootloader that is integrated
into the BIOS, and a main firmware that is stored within the operating
system's file system.
Introduce support for loading ISH main firmware from host. This feature is
applicable for Lunar Lake and later generation.
Current intel-ishtp-loader, is designed for Chrome OS based systems which
uses core boot and has different firmware loading method. For non chrome
systems the ISH firmware loading uses different method.
Key differences include:
1. The new method utilizes ISHTP capability/fixed client to enumerate the
firmware loader function. It does not require a connection or flow control,
unlike the method used in Chrome OS, which is enumerated as an ISHTP
dynamic client driver, necessitating connect/disconnect operations and flow
control.
2. The new method employs a table to describe firmware fragments, which are
sent to ISH in a single operation. Conversely, the Chrome OS method sends
firmware fragments in multiple operations within a loop, sending only one
fragment at a time.
Additionally, address potential error scenarios to ensure graceful failure
handling.
- Firmware Not Found: Triggers if request_firmware() fails, leaving ISH in
a waiting state.
Recovery: Re-insmod the ISH drivers to retry.
- DMA Buffer Allocation Failure: Occurs during prepare_dma_bufs(), leading
to ISH waiting state. Allocated resources are released.
Recovery: Re-insmod the ISH drivers to retry.
- Incorrect Firmware Image: Causes ISH to refuse loading after three failed
attempts.
Recovery: A platform reset is required.
Please refer to the [Documentation](Documentation/hid/intel-ish-hid.rst)
for the details on flows.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Introduces a new structure, ishtp_driver_data, to hold driver-specific
data, including the firmware filename for different hardware variants of
the Intel Integrated Sensor Hub (ISH).
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add a section to describe the ISH firmware loading process for Lunar Lake
and later generations.
Signed-off-by: Qianru Huang <qianru.huang@intel.com>
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Remove section numbering from the Intel Integrated Sensor Hub (ISH)
documentation to simplify the structure, making it easier to maintain
and update in the future.
Suggested-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Qianru Huang <qianru.huang@intel.com>
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The logic in dualshock4_get_calibration_data() used uninitialised data
in case of a failed kzalloc() for the transfer buffer.
The solution is to group all business logic and all sanity checks
together, and jump only to the latter in case of an error.
While we're at it, factor out the axes' labelling, since it must happen
either way for input_report_abs() to succeed later on.
Thanks to Dan Carpenter for the Smatch static checker warning.
Fixes: a48a7cd85f ("HID: playstation: DS4: Don't fail on calibration data request")
Signed-off-by: Max Staudt <max@enpas.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
The four litmus tests in Documentation/litmus-tests/atomic do not
declare all of their local variables. Although this is just fine for LKMM
analysis by herd7, it causes build failures when run in-kernel by klitmus.
This commit therefore adjusts these tests to declare all local variables.
Reported-by: Andrea Parri <parri.andrea@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
The ORDERING section of Documentation/atomic_t.txt can easily be read as
saying that conditional atomic RMW operations that fail are ordered when
those operations have the _acquire() or _release() suffixes. This is
not the case, therefore update this section to make it clear that failed
conditional atomic RMW operations provide no ordering.
Reported-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: <linux-arch@vger.kernel.org>
Cc: <linux-doc@vger.kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
This commit adds four litmus tests showing that a failing cmpxchg()
operation is unordered unless followed by an smp_mb__after_atomic()
operation.
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: <linux-arch@vger.kernel.org>
Cc: <linux-doc@vger.kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
This commit documents the litmus tests in the "locking" directory.
[ paulmck: Apply formatting feedback from Andrea Parri. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Jade Alglave <j.alglave@ucl.ac.uk>
Cc: Luc Maranget <luc.maranget@inria.fr>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Akira Yokosawa <akiyks@gmail.com>
Cc: Daniel Lustig <dlustig@nvidia.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: <linux-arch@vger.kernel.org>
Cc: <linux-doc@vger.kernel.org>
Acked-by: Andrea Parri <parri.andrea@gmail.com>
Certain devices, both from STM and Weida Tech, need to be woken up after
having entered a deeper sleep state. The relevant places to wake up such
device is during our initial HID probe, and after resuming.
A retry for power commands was previously added to i2c_hid_set_power to
wake up Weida Tech devices, but lacked sufficient sleep for STM devices.
Replace the power command retry with the same address probe we using
during our initial HID probe.
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some STM microcontrollers need 400µs after rising clock edge in order to
come out of their deep sleep state. This in turn means that our address
probe will fail as the device is not ready to service it.
Retry the probe once after a delay to see if the device came alive,
otherwise treat the device as missing.
Link: https://lore.kernel.org/all/20240405102436.3479210-1-lma@chromium.org/#t
Co-developed-by: Radoslaw Biernacki <rad@chromium.org>
Co-developed-by: Lukasz Majczak <lma@chromium.org>
Signed-off-by: Kenny Levinsen <kl@kl.wtf>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Add init of the lightbar which is a small panel on the back of the ASUS
ROG Z13 and uses the same MCU as keyboards.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
A handful of buttons on the ROG Ally are not actually part of the xpad
device and are instead keyboard keys (a typical use of the MCU that asus
uses). We attach a group of F<num> key codes which aren't used much and
which the handheld community has already accepted as defaults here.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Some of the n-key stuff is old and outdated, so
make asus_kbd_init() generic to use with other
report ID and remove rog_nkey_led_init().
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Adjusts the report descriptor for N-Key devices to
make the output count 0x01 which completely avoids
the need for a block of filtering.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Adds a few recognized Logitech HID++ capable mice over USB and Bluetooth
Signed-off-by: Allan Sandfeld Jensen <kde@carewolf.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Currently hid-debug only output question marks for all force
feedback related input mapping making debugging gamepads
with force feedback a challenge.
This adds the necessary mapping information to output
EV_FF and FF_STATUS related information.
Signed-off-by: Thomas Kuehne <thomas.kuehne@gmx.li>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Currently hid-debug's hid_resolv_event prints questions marks for
all entries without explicit mapping information. This makes
debugging unnecessarily complicated as multiple different
keys may simply result in the same uninformative output.
Some common event codes are deliberately not defined in
input-event-codes.h. For example the 16th gamepad key.
Instead, print the hexadecimal codes for all events without symbolic
names.
Signed-off-by: Thomas Kuehne <thomas.kuehne@gmx.li>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This adds the letter "e" to fix hid_usage_table' HorizontalMoir and
VerticalMoir entries.
Signed-off-by: ThomasKuehne <2562574+ThomasKuehne@users.noreply.github.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This device sometimes doesn't send touch release signals when moving
from >=4 fingers to <4 fingers. Using MT_QUIRK_NOT_SEEN_MEANS_UP instead
of MT_QUIRK_ALWAYS_VALID makes sure that no touches become stuck.
MT_QUIRK_FORCE_MULTI_INPUT is not necessary for this device, but does no
harm.
Signed-off-by: Sean O'Brien <seobrien@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
