* s4/a1: add regmap maximum register for proper debugfs dump
* s4: add MODULE_DEVICE_TABLE() on pll and periph controllers
* pll driver: print clock name on lock error to help debug
* vclk: finish dsi clock path support
* license: fix occurence "GPL v2" as reported by checkpatch
-----BEGIN PGP SIGNATURE-----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=1oOQ
-----END PGP SIGNATURE-----
Merge tag 'clk-meson-v6.10-1' of https://github.com/BayLibre/clk-meson into clk-amlogic
Pull Amlogic clk driver updates from Jerome Brunet:
- s4/a1: add regmap maximum register for proper debugfs dump
- s4: add MODULE_DEVICE_TABLE() on pll and periph controllers
- pll driver: print clock name on lock error to help debug
- vclk: finish dsi clock path support
- license: fix occurence "GPL v2" as reported by checkpatch
* tag 'clk-meson-v6.10-1' of https://github.com/BayLibre/clk-meson:
clk: meson: s4: fix module autoloading
clk: meson: fix module license to GPL only
clk: meson: g12a: make VCLK2 and ENCL clock path configurable by CCF
clk: meson: add vclk driver
clk: meson: pll: print out pll name when unable to lock it
clk: meson: s4: pll: determine maximum register in regmap config
clk: meson: s4: peripherals: determine maximum register in regmap config
clk: meson: a1: pll: determine maximum register in regmap config
clk: meson: a1: peripherals: determine maximum register in regmap config
Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally.
So, remove unused structs and fix the following
-Wflex-array-member-not-at-end warnings:
drivers/net/wireless/realtek/rtlwifi/btcoexist/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8188ee/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8192c/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8192ce/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8192cu/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8192de/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8192ee/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8192se/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8723ae/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8723be/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8723com/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/../wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/net/wireless/realtek/rtlwifi/wifi.h:1063:30: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/ZjLFIa31BGPVCGh1@neat
Add H2C command and offload template packet to allow firmware send ARP
response in WoWLAN mode. Then, firmware in WoWLAN mode can interactive
with peer that issue ARP request to query MAC address.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-13-pkshih@realtek.com
When using the WEP cipher, we need to add the address cam type as all
unicast mode to let firmware to work. Although WEP only set GTK in
mac80211, but we need to set both PTK and GTK information to firmware.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-12-pkshih@realtek.com
Once we connect to AP with 802.11w enabled, IGTK rekey happen during GTK
happen. We get IGTK IPN from mac80211 and set to firmware, and get latest
IGTK IPN from AOAC report then update to mac80211 after resume. When rekey
happen, also update new IGTK key info to mac80211. Furthermore, We
construct SA query reply packet to firmware. If firmware received SA query
request from AP can transmit reply back when suspend.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-11-pkshih@realtek.com
When resume we parse AOAC report from firmware using H2C and C2H
registers before enable interrupt, then update PTK RX PN and GTK RX PN.
After enable interrupt, we parse AOAC report using H2C and C2H commands,
then update PTK TX PN and update new GTK key info if GTK rekey during
suspend. Furthermore, We update pattern match index if wakeup by pattern.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-10-pkshih@realtek.com
We construct EAPoL packet with various encryption method, and download
to firmware. Also we add Key Encryption Key (KEK) and Key Confirmation Key
(KCK) to H2C command. Once firmware received EAPoL group rekey packet(1/2)
can TX EAPoL group rekey packet(2/2) when suspend.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-8-pkshih@realtek.com
This H2C command is used to set WoWLAN global config, and we correct
the H2C format by enlarging the H2C size to fill GTK and PTK info.
This fix is compatible with old firmware.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-7-pkshih@realtek.com
This H2C command set key information into security CAM including key
index, entry index and valid map. No logic is changed.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-6-pkshih@realtek.com
Get the PTK and PTK TRX PN value and transfer to IV value, these
values will used by firmware to generate packets with correct IV value.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-5-pkshih@realtek.com
Need Auth Key Management(AKM) to let firmware to generate appropriate
EAPoL packet for GTK rekey. The AKM is present in the association request
RSN IE to indicate which cipher that station selected.
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-4-pkshih@realtek.com
After enabling packet offload, the TX will be stuck after resume from
WoWLAN mode. And the 8852c gets error messages like
rtw89_8852ce 0000:04:00.0: No busy txwd pages available
rtw89_8852ce 0000:04:00.0: queue 0 txwd 100 is not idle
rtw89_8852ce 0000:04:00.0: queue 0 txwd 101 is not idle
rtw89_8852ce 0000:04:00.0: queue 0 txwd 102 is not idle
rtw89_8852ce 0000:04:00.0: queue 0 txwd 103 is not idle
If suspend/resume many times that firmware will download failed and
disconnection.
To fix these issues, We removed the rtw89_hci_disable_intr() and
rtw89_hci_enable_intr() during rtw89_wow_swap_fw() to prevent add packet
offload can't receive c2h back due to interrupt disable. Only 8852C and
8922A needs to disable interrupt before downloading fw.
Furthermore, we avoid using low power HCI mode on WoWLAN mode, to prevent
interrupt enabled, then get interrupt and calculate RXBD mismatched due to
software RXBD index already reset but hardware RXBD index not yet.
Fixes: 5c12bb66b7 ("wifi: rtw89: refine packet offload flow")
Signed-off-by: Chih-Kang Chang <gary.chang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-3-pkshih@realtek.com
802.11be WiFi chips need a RFK (RF calibration) notify H2C command after
downloading WoWLAN firmware to make sure RF TX/RX work fine when leaving
power save mode, so add it to correct RF TX/RX in WoWLAN mode.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240502022505.28966-2-pkshih@realtek.com
- Add missing RCH support for endpoint access_coordinate calculation
-----BEGIN PGP SIGNATURE-----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=CqsW
-----END PGP SIGNATURE-----
Merge tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fix from Dave Jiang:
"Add missing RCH support for endpoint access_coordinate calculation.
A late bug was reported by Robert Richter that the Restricted CXL Host
(RCH) support was missing in the CXL endpoint access_coordinate
calculation.
The missing support causes the topology iterator to stumble over a
NULL pointer and triggers a kernel OOPS on a platform with CXL 1.1
support.
The fix bypasses RCH topology as the access_coordinate calculation is
not necessary since RCH does not support hotplug and the memory region
exported should be covered by the HMAT table already.
A unit test is also added to cxl_test to check against future
regressions on the topology iterator"
* tag 'cxl-fixes-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Fix cxl_endpoint_get_perf_coordinate() support for RCH
This reverts commit a580ea994f.
This revert is to resolve Dragos's report of page_pool leak here:
https://lore.kernel.org/lkml/20240424165646.1625690-2-dtatulea@nvidia.com/
The reverted patch interacts very badly with commit 2cc3aeb5ec ("skbuff:
Fix a potential race while recycling page_pool packets"). The reverted
commit hopes that the pp_recycle + is_pp_page variables do not change
between the skb_frag_ref and skb_frag_unref operation. If such a change
occurs, the skb_frag_ref/unref will not operate on the same reference type.
In the case of Dragos's report, the grabbed ref was a pp ref, but the unref
was a page ref, because the pp_recycle setting on the skb was changed.
Attempting to fix this issue on the fly is risky. Lets revert and I hope
to reland this with better understanding and testing to ensure we don't
regress some edge case while streamlining skb reffing.
Fixes: a580ea994f ("net: mirror skb frag ref/unref helpers")
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Mina Almasry <almasrymina@google.com>
Link: https://lore.kernel.org/r/20240502175423.2456544-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current net-next/main does not boot for older chipsets e.g. Stratus.
Sample dmesg:
[ 11.368315] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): Able to reserve only 0 out of 9 requested RX rings
[ 11.390181] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): Unable to reserve tx rings
[ 11.438780] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): 2nd rings reservation failed.
[ 11.487559] bnxt_en 0000:02:00.0 (unnamed net_device) (uninitialized): Not enough rings available.
[ 11.506012] bnxt_en 0000:02:00.0: probe with driver bnxt_en failed with error -12
This is caused by bnxt_get_avail_msix() returning a negative value for
these chipsets not using the new resource manager i.e. !BNXT_NEW_RM.
This in turn causes hwr.cp in __bnxt_reserve_rings() to be set to 0.
In the current call stack, __bnxt_reserve_rings() is called from
bnxt_set_dflt_rings() before bnxt_init_int_mode(). Therefore,
bp->total_irqs is always 0 and for !BNXT_NEW_RM bnxt_get_avail_msix()
always returns a negative number.
Historically, MSIX vectors were requested by the RoCE driver during
run-time and bnxt_get_avail_msix() was used for this purpose. Today,
RoCE MSIX vectors are statically allocated. bnxt_get_avail_msix() should
only be called for the BNXT_NEW_RM() case to reserve the MSIX ahead of
time for RoCE use.
bnxt_get_avail_msix() is also be simplified to handle the BNXT_NEW_RM()
case only.
Fixes: d630624ebd ("bnxt_en: Utilize ulp client resources if RoCE is not registered")
Signed-off-by: David Wei <dw@davidwei.uk>
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://lore.kernel.org/r/20240502203757.3761827-1-dw@davidwei.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each attribute inside a nested IFLA_VF_VLAN_LIST is assumed to be a
struct ifla_vf_vlan_info so the size of such attribute needs to be at least
of sizeof(struct ifla_vf_vlan_info) which is 14 bytes.
The current size validation in do_setvfinfo is against NLA_HDRLEN (4 bytes)
which is less than sizeof(struct ifla_vf_vlan_info) so this validation
is not enough and a too small attribute might be cast to a
struct ifla_vf_vlan_info, this might result in an out of bands
read access when accessing the saved (casted) entry in ivvl.
Fixes: 79aab093a0 ("net: Update API for VF vlan protocol 802.1ad support")
Signed-off-by: Roded Zats <rzats@paloaltonetworks.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240502155751.75705-1-rzats@paloaltonetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=aeD1
-----END PGP SIGNATURE-----
Merge tag 'ipsec-2024-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2024-05-02
1) Fix an error pointer dereference in xfrm_in_fwd_icmp.
From Antony Antony.
2) Preserve vlan tags for ESP transport mode software GRO.
From Paul Davey.
3) Fix a spelling mistake in an uapi xfrm.h comment.
From Anotny Antony.
* tag 'ipsec-2024-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Correct spelling mistake in xfrm.h comment
xfrm: Preserve vlan tags for transport mode software GRO
xfrm: fix possible derferencing in error path
====================
Link: https://lore.kernel.org/r/20240502084838.2269355-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the driver uses local_bh_disable()/local_bh_enable() in its
IRQ handler to avoid triggering net_rx_action() softirq on exit from
netif_rx(). The net_rx_action() could trigger this driver .start_xmit
callback, which is protected by the same lock as the IRQ handler, so
calling the .start_xmit from netif_rx() from the IRQ handler critical
section protected by the lock could lead to an attempt to claim the
already claimed lock, and a hang.
The local_bh_disable()/local_bh_enable() approach works only in case
the IRQ handler is protected by a spinlock, but does not work if the
IRQ handler is protected by mutex, i.e. this works for KS8851 with
Parallel bus interface, but not for KS8851 with SPI bus interface.
Remove the BH manipulation and instead of calling netif_rx() inside
the IRQ handler code protected by the lock, queue all the received
SKBs in the IRQ handler into a queue first, and once the IRQ handler
exits the critical section protected by the lock, dequeue all the
queued SKBs and push them all into netif_rx(). At this point, it is
safe to trigger the net_rx_action() softirq, since the netif_rx()
call is outside of the lock that protects the IRQ handler.
Fixes: be0384bf59 ("net: ks8851: Handle softirqs at the end of IRQ thread to fix hang")
Tested-by: Ronald Wahl <ronald.wahl@raritan.com> # KS8851 SPI
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240502183436.117117-1-marex@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I often forget the exact naming of ops and have to look at
the spec to find it. Add support for listing the operations:
$ ./cli.py --spec .../netdev.yaml --list-ops
dev-get [ do, dump ]
page-pool-get [ do, dump ]
page-pool-stats-get [ do, dump ]
queue-get [ do, dump ]
napi-get [ do, dump ]
qstats-get [ dump ]
For completeness also support listing all ops (including
notifications:
# ./cli.py --spec .../netdev.yaml --list-msgs
dev-get [ dump, do ]
dev-add-ntf [ notify ]
dev-del-ntf [ notify ]
dev-change-ntf [ notify ]
page-pool-get [ dump, do ]
page-pool-add-ntf [ notify ]
page-pool-del-ntf [ notify ]
page-pool-change-ntf [ notify ]
page-pool-stats-get [ dump, do ]
queue-get [ dump, do ]
napi-get [ dump, do ]
qstats-get [ dump ]
Use double space after the name for slightly easier to read
output.
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240502164043.2130184-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The KVM_CREATE_GUEST_MEMFD ioctl returns a file descriptor, and is
documented as such in the description. However, the "Returns" field
in the documentation states that the ioctl returns 0 on success.
Update this to match the description.
Signed-off-by: Carlos López <clopez@suse.de>
Fixes: a7800aa80e ("KVM: Add KVM_CREATE_GUEST_MEMFD ioctl() for guest-specific backing memory")
Link: https://lore.kernel.org/r/20240424103317.28522-1-clopez@suse.de
Signed-off-by: Sean Christopherson <seanjc@google.com>
3ef0e1f8ca ("x86: olpc: add One Laptop Per Child architecture support")
added a commented-out EHCI config section that has never been used.
Remove this dead code.
Link: https://lore.kernel.org/r/20240125030623.513902-1-chentao@kylinos.cn
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Eric Dumazet says:
====================
rtnetlink: rtnl_stats_dump() changes
Getting rid of RTNL in rtnl_stats_dump() looks challenging.
In the meantime, we can:
1) Avoid RTNL acquisition for the final NLMSG_DONE marker.
2) Use for_each_netdev_dump() instead of the net->dev_index_head[]
hash table.
====================
Link: https://lore.kernel.org/r/20240502113748.1622637-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Switch rtnl_stats_dump() to use for_each_netdev_dump()
instead of net->dev_index_head[] hash table.
This makes the code much easier to read, and fixes
scalability issues.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240502113748.1622637-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By returning 0 (or an error) instead of skb->len,
we allow NLMSG_DONE to be appended to the current
skb at the end of a dump, saving a couple of recvmsg()
system calls.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240502113748.1622637-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first part of the compatible of USB VBUS node misses ending quote,
thus we have one long compatible consisting of two compatible strings
leading to dtbs_check warnings:
sc7180-idp.dtb: usb-vbus-regulator@1100: compatible:0: 'qcom,pm6150-vbus-reg,\n qcom,pm8150b-vbus-reg' does not match '^[a-zA-Z0-9][a-zA-Z0-9,+\\-._/]+$'
sc7180-idp.dtb: /soc@0/spmi@c440000/pmic@0/usb-vbus-regulator@1100: failed to match any schema with compatible: ['qcom,pm6150-vbus-reg,\n qcom,pm8150b-vbus-reg']
Reported-by: Rob Herring <robh@kernel.org>
Fixes: f81c2f01ca ("arm64: dts: qcom: pm6150: define USB-C related blocks")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240330091311.6224-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The sys_cabriolet.c file includes support for multiple evaluation
boards. pc164 and lx164 are for ev56 CPUs, while the eb164 is
now the last supported machine that only supports ev5 but not
ev56.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
APECS is the DECchip 21071x chipset for the EV4 and EV45 generation, while
LCA is the integrated I/O support on the corresponding low-cost alpha
machines of that generation.
All of these CPUs lack the BWX extension for byte and word access, so
drop the chipset support and all associated machines.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The sable family (Alphaserver 2000 and 2100) comes in variants for
EV4, EV45, EV5 and EV56. Drop support for the earlier ones that
lack support for the BWX extension but keep the later 'gamma'
variant around since that works with EV56 CPUs.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This is one of the hackiest Alpha machines, and the only one without
PCI support. Removing this allows cleaning up code in eise and tty
drivers in addition to the architecture code.
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Out of 21 constants, only 6 are used...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We want io.h primitives (readb(), etc.) to be extern inline.
However, that requires the backing out-of-line implementation
somewhere, preferably kept in sync with the inline ones.
The way it's done is __EXTERN_INLINE macro that defaults to
extern inline, but can be overridden in compilation unit where
the out-of-line instance will be.
That works, but it's brittle - we *must* make sure that asm/io.h
is the very first include in such compilation units. There'd
been a bunch of bugs of that sort in the past.
Another issue is the choice of overriding definition for
__EXTERN_INLINE; it must be either 'inline' or empty. Either
will do for compilation purposes - inline void foo(...) {...}
(without extern or static) is going to generate out-of-line
instance. The difference is that 'definition without a
prototype' heuristics trigger on
void foo(void)
{
...
}
but not on
inline void foo(void)
{
...
}
Most of the overrides go for 'inline'; in two cases (sys_jensen
and core_t2) __EXTERN_INLINE is defined as empty. Without
-Wmissing-prototypes it didn't matter, but now that we have
that thing always on...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
the only user had been drivers/char/h8.c, and that got taken out
and shot back in 2004...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
... and missing externs in proto.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
definitions of avanti_mv and noname_mv (and associated ALIAS_MV)
are conditional upon the wrong thing - it should be
CONFIG_ALPHA_{AVANTI,NONAME}_CH, not CONFIG_ALPHA_{AVANTI,NONAME}.
The former is a system type; the latter is for the bits shared
by AVANTI with XL and NONAME with ALPHA_BOOK1 resp.
We want all those machine vectors defined (but not aliased - see
ALIAS_MV() definition for details) for GENERIC build; for
system-specfic builds we want only one mv, so avanti_mv should *not*
be there for XL; it certainly should not be have alpha_mv aliased to
it on such config - xl_mv will be there and alpha_mv can't be aliased
to both of those.
The same goes for Noname vs. Alphabook1.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
if it's really used only inside the same source file, make it
static...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Since clone3() needs the full register state saved for copying into
the child, it needs the same kind of wrapper as fork(), vfork() and
clone(). Exact same wrapper works, actually...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On alpha str{n,}{cpy,cat}() implementations are playing
fun games with shared chunks of code. The problem is, they are
using direct branches and need to be next to each other.
Currently it's done by building them in separate object
files, then using ld -r to link those together. Unfortunately,
genksyms machinery has no idea what to do with that - we have
generated in arch/alpha/lib/.strcat.S.cmd, but there's nothing
to propagate that into .stycpy.S.cmd, so modpost doesn't find
anything for those symbols, resulting in
WARNING: modpost: EXPORT symbol "strcpy" [vmlinux] version generation failed, symbol will not be versioned.
Is "strcpy" prototyped in <asm/asm-prototypes.h>?
WARNING: modpost: EXPORT symbol "strcat" [vmlinux] version generation failed, symbol will not be versioned.
Is "strcat" prototyped in <asm/asm-prototypes.h>?
WARNING: modpost: EXPORT symbol "strncpy" [vmlinux] version generation failed, symbol will not be versioned.
Is "strncpy" prototyped in <asm/asm-prototypes.h>?
WARNING: modpost: EXPORT symbol "strncat" [vmlinux] version generation failed, symbol will not be versioned.
Is "strncat" prototyped in <asm/asm-prototypes.h>?
spew on modversion-enabled builds (all 4 functions in question
are in fact prototyped in asm-prototypes.h)
Fixing doesn't require messing with kbuild, thankfully -
just build one object (i.e. have sty{n,}cpy.S with includes of relevant
*.S instead of playing with ld -r) and that's it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Take scr_memmove() out of line, make both it and scr_memcpyw()
conditional upon VGA_CONSOLE or MDA_CONSOLE (if neither is
selected, we are certain to be working with the kernel-allocated
buffer rather than VRAM and defaults will work just fine).
That allows to clean vt_buffer.h, but that's a separate story
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Perf event names aren't case sensitive. For sysfs events the entire
directory of events is read then iterated comparing names in a case
insensitive way, most often to see if an event is present.
Consider:
$ perf stat -e inst_retired.any true
The event inst_retired.any may be present in any PMU, so every PMU's
sysfs events are loaded and then searched with strcasecmp to see if
any match. This event is only present on the cpu PMU as a JSON event
so a lot of events were loaded from sysfs unnecessarily just to prove
an event didn't exist there.
This change avoids loading all the events by assuming sysfs event
names are always either lower or uppercase. It uses file exists and
only loads the events when the desired event is present.
For the example above, the number of openat calls measured by 'perf
trace' on a tigerlake laptop goes from 325 down to 255. The reduction
will be larger for machines with many PMUs, particularly replicated
uncore PMUs.
Ensure pmu_aliases_parse() is called before all uses of the aliases
list, but remove some "pmu->sysfs_aliases_loaded" tests as they are now
part of the function.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-7-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Being either lower or upper case means event name probes can avoid
scanning the directory doing case insensitive comparisons, just the
lower or upper case version of the name can be checked for
existence.
For the majority of PMUs event names are all lower case, upper case
names are present on S390.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-6-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Allow events/aliases to be eagerly loaded for a PMU. Factor out the
pmu_aliases_parse to allow this.
Parse a test event and check it configures the attribute as expected.
There is overlap with the parse-events tests, but this test is done with
a PMU created in a temp directory and doesn't rely on PMUs in sysfs.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-5-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In tests/pmu.c, make a common utility that creates a PMU in a mkdtemp
directory and uses regular PMU parsing logic to load that PMU. Formats
must still be eagerly loaded as by default the PMU code assumes devices
are going to be in sysfs.
In util/pmu.[ch], hide perf_pmu__format_parse but add the eager argument
to perf_pmu__lookup called by perf_pmus__add_test_pmu. Later patches
will eagerly load other non-sysfs files when eager loading is enabled.
In tests/pmu.c, rather than manually constructing a list of term
arguments, just use the term parsing code from a string.
Add more comments and debug logging.
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jing Zhang <renyu.zj@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: https://lore.kernel.org/r/20240502213507.2339733-4-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
