[ Upstream commit c235a71322 ]
There are a few prechecks made before HDP flush like a flush is not
required on APU bare metal. Using hdp callback directly bypasses those
checks. Use amdgpu_device_flush_hdp which takes care of prechecks.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1d9bff4cf8)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 447fab3095 ]
Otherwise triggering sysfs multiple times without other submissions in
between only runs the shader once.
v2: add some comment
v3: re-add missing cast
v4: squash in semicolon fix
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8b2ae7d492)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7c178d9e5 ]
During recovery/check operations, the process_checks function loops
through available disks to find a 'primary' source with successfully
read data.
If no suitable source disk is found after checking all possibilities,
the 'primary' index will reach conf->raid_disks * 2. Add an explicit
check for this condition after the loop. If no source disk was found,
print an error message and return early to prevent further processing
without a valid primary source.
Link: https://lore.kernel.org/linux-raid/20250408143808.1026534-1-meir.elisha@volumez.com
Signed-off-by: Meir Elisha <meir.elisha@volumez.com>
Suggested-and-reviewed-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d466304c43 ]
Bartlett Lake has a P-core only product with Raptor Cove.
[ mingo: Switch around the define as pointed out by Christian Ludloff:
Ratpr Cove is the core, Bartlett Lake is the product.
Signed-off-by: Pi Xiange <xiange.pi@intel.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Christian Ludloff <ludloff@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: "Ahmed S. Darwish" <darwi@linutronix.de>
Cc: x86-cpuid@lists.linux.dev
Link: https://lore.kernel.org/r/20250414032839.5368-1-xiange.pi@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b044614be ]
Running lib_ubsan.ko on arm64 (without CONFIG_UBSAN_TRAP) panics the
kernel:
[ 31.616546] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: test_ubsan_out_of_bounds+0x158/0x158 [test_ubsan]
[ 31.646817] CPU: 3 UID: 0 PID: 179 Comm: insmod Not tainted 6.15.0-rc2 #1 PREEMPT
[ 31.648153] Hardware name: linux,dummy-virt (DT)
[ 31.648970] Call trace:
[ 31.649345] show_stack+0x18/0x24 (C)
[ 31.650960] dump_stack_lvl+0x40/0x84
[ 31.651559] dump_stack+0x18/0x24
[ 31.652264] panic+0x138/0x3b4
[ 31.652812] __ktime_get_real_seconds+0x0/0x10
[ 31.653540] test_ubsan_load_invalid_value+0x0/0xa8 [test_ubsan]
[ 31.654388] init_module+0x24/0xff4 [test_ubsan]
[ 31.655077] do_one_initcall+0xd4/0x280
[ 31.655680] do_init_module+0x58/0x2b4
That happens because the test corrupts other data in the stack:
400: d5384108 mrs x8, sp_el0
404: f9426d08 ldr x8, [x8, #1240]
408: f85f83a9 ldur x9, [x29, #-8]
40c: eb09011f cmp x8, x9
410: 54000301 b.ne 470 <test_ubsan_out_of_bounds+0x154> // b.any
As there is no guarantee the compiler will order the local variables
as declared in the module:
volatile char above[4] = { }; /* Protect surrounding memory. */
volatile int arr[4];
volatile char below[4] = { }; /* Protect surrounding memory. */
There is another problem where the out-of-bound index is 5 which is larger
than the extra surrounding memory for protection.
So, use a struct to enforce the ordering, and fix the index to be 4.
Also, remove some of the volatiles and rely on OPTIMIZER_HIDE_VAR()
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20250415203354.4109415-1-smostafa@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21f4314e66 ]
On malfunctioning hardware, timeout error messages can appear thousands
of times, creating unnecessary system pressure and log bloat. This patch
makes two improvements:
1. Replace dev_err() with dev_err_ratelimited() to prevent log flooding
when hardware errors persist
2. Remove the redundant timeout value parameter from the error message,
as 'ret' is always zero in this error path
These changes reduce logging overhead while maintaining necessary error
reporting for debugging purposes.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250401-tegra-v2-2-126c293ec047@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41c721fc09 ]
Some machines with tegra_qspi_combined_seq_xfer hardware issues generate
excessive kernel warnings, severely polluting the logs:
dmesg | grep -i "WARNING:.*tegra_qspi_transfer_one_message" | wc -l
94451
This patch replaces WARN_ON with WARN_ON_ONCE for timeout conditions to
reduce log spam. The subsequent error message still prints on each
occurrence, providing sufficient information about the failure, while
the stack trace is only needed once for debugging purposes.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250401-tegra-v2-1-126c293ec047@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1df0d4c616 ]
wait_event_timeout() will set the state of the current
task to TASK_UNINTERRUPTIBLE, before doing the condition check. This
means that ksmbd_durable_scavenger_alive() will try to acquire the mutex
while already in a sleeping state. The scheduler warns us by giving
the following warning:
do not call blocking ops when !TASK_RUNNING; state=2 set at
[<0000000061515a6f>] prepare_to_wait_event+0x9f/0x6c0
WARNING: CPU: 2 PID: 4147 at kernel/sched/core.c:10099 __might_sleep+0x12f/0x160
mutex lock is not needed in ksmbd_durable_scavenger_alive().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb53a9aa5f ]
We need to provide all six forms of the alternative macros
(ALTERNATIVE, ALTERNATIVE_2, _ALTERNATIVE_CFG, _ALTERNATIVE_CFG_2,
__ALTERNATIVE_CFG, __ALTERNATIVE_CFG_2) for all four cases derived
from the two ifdefs (RISCV_ALTERNATIVE, __ASSEMBLY__) in order to
ensure all configs can compile. Define this missing ones and ensure
all are defined to consume all parameters passed.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504130710.3IKz6Ibs-lkp@intel.com/
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20250414120947.135173-2-ajones@ventanamicro.com
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e3c15ee0d ]
In iomap_adjust_read_range, i is either the first !uptodate block, or it
is past last for the second loop looking for trailing uptodate blocks.
Assuming there's no overflow (there's no combination of huge folios and
tiny blksize) then yeah, there is no point in retesting that the same
block pointed to by i is uptodate since we hold the folio lock so nobody
else could have set it uptodate.
Signed-off-by: Gou Hao <gouhao@uniontech.com>
Link: https://lore.kernel.org/20250410071236.16017-1-gouhao@uniontech.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3940f5349b ]
There's a lockdep false positive warning related to i8253_lock:
WARNING: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected
...
systemd-sleep/3324 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
ffffffffb2c23398 (i8253_lock){+.+.}-{2:2}, at: pcspkr_event+0x3f/0xe0 [pcspkr]
...
... which became HARDIRQ-irq-unsafe at:
...
lock_acquire+0xd0/0x2f0
_raw_spin_lock+0x30/0x40
clockevent_i8253_disable+0x1c/0x60
pit_timer_init+0x25/0x50
hpet_time_init+0x46/0x50
x86_late_time_init+0x1b/0x40
start_kernel+0x962/0xa00
x86_64_start_reservations+0x24/0x30
x86_64_start_kernel+0xed/0xf0
common_startup_64+0x13e/0x141
...
Lockdep complains due pit_timer_init() using the lock in an IRQ-unsafe
fashion, but it's a false positive, because there is no deadlock
possible at that point due to init ordering: at the point where
pit_timer_init() is called there is no other possible usage of
i8253_lock because the system is still in the very early boot stage
with no interrupts.
But in any case, pit_timer_init() should disable interrupts before
calling clockevent_i8253_disable() out of general principle, and to
keep lockdep working even in this scenario.
Use scoped_guard() for that, as suggested by Thomas Gleixner.
[ mingo: Cleaned up the changelog. ]
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/Z-uwd4Bnn7FcCShX@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef5c23ae9a ]
With audio graph card, original cpu dai is changed to codec device in
backend, so if cpu dai is dummy device in backend, get the codec dai
device, which is the real hardware device connected.
The specific case is ASRC->SAI->AMIX->CODEC.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/20250319033504.2898605-1-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7b705c238 ]
When a fatal error occurs, a phy down event may not be received to set
phy->phy_attached to zero.
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Salomon Dushimirimana <salomondush@google.com>
Link: https://lore.kernel.org/r/20250319230305.3172920-1-salomondush@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd4c002506 ]
GPIO_OUT[0] is connected to the reset pin of embedded UFS device.
Before powering off the phy assert the reset signal.
This is added as a gs101 specific suspend hook so as not to have any
unintended consequences for other SoCs supported by this driver.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-7-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67e4085015 ]
ufshcd_pltfrm_remove() calls ufshcd_remove(hba) which in turn calls
ufshcd_hba_exit().
By moving the phy_power_off() and phy_exit() calls to the newly created
.exit callback they get called by ufshcd_variant_hba_exit() before
ufshcd_hba_exit() turns off the regulators. This is also similar flow to
the ufs-qcom driver.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-6-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit deac9ad496 ]
PRDT_PREFETCH_ENABLE[31] bit should be set when desctype field of
fmpsecurity0 register is type2 (double file encryption) or type3
(support for file and disk encryption). Setting this bit enables PRDT
pre-fetching on both TXPRDT and RXPRDT.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-5-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d101165e7 ]
Ensure clocks are enabled before configuring unipro. Additionally move
the pre_link() hook before the exynos_ufs_phy_init() calls. This means
the register write sequence more closely resembles the ordering of the
downstream driver.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Link: https://lore.kernel.org/r/20250319-exynos-ufs-stability-fixes-v2-1-96722cc2ba1b@linaro.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit daff37f00c ]
The hw port ID of phy may change when inserting disks in batches, causing
the port ID in hisi_sas_port and itct to be inconsistent with the hardware,
resulting in I/O errors. The solution is to set the device state to gone to
intercept I/O sent to the device, and then execute linkreset to discard and
find the disk to re-update its information.
Signed-off-by: Xingui Yang <yangxingui@huawei.com>
Link: https://lore.kernel.org/r/20250312095135.3048379-3-yangxingui@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccad447a3d ]
Block validity checks need to be skipped in case they are called
for journal blocks since they are part of system's protected
zone.
Currently, this is done by checking inode->ino against
sbi->s_es->s_journal_inum, which is a direct read from the ext4 sb
buffer head. If someone modifies this underneath us then the
s_journal_inum field might get corrupted. To prevent against this,
change the check to directly compare the inode with journal->j_inode.
**Slight change in behavior**: During journal init path,
check_block_validity etc might be called for journal inode when
sbi->s_journal is not set yet. In this case we now proceed with
ext4_inode_block_valid() instead of returning early. Since systems zones
have not been set yet, it is okay to proceed so we can perform basic
checks on the blocks.
Suggested-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/0c06bc9ebfcd6ccfed84a36e79147bf45ff5adc1.1743142920.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 280e5a3010 ]
If iommu_device_register() encounters an error, it can end up tearing
down already-configured groups and default domains, however this
currently still leaves devices hooked up to iommu-dma (and even
historically the behaviour in this area was at best inconsistent across
architectures/drivers...) Although in the case that an IOMMU is present
whose driver has failed to probe, users cannot necessarily expect DMA to
work anyway, it's still arguable that we should do our best to put
things back as if the IOMMU driver was never there at all, and certainly
the potential for crashing in iommu-dma itself is undesirable. Make sure
we clean up the dev->dma_iommu flag along with everything else.
Reported-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Closes: https://lore.kernel.org/all/CAGXv+5HJpTYmQ2h-GD7GjyeYT7bL9EBCvu0mz5LgpzJZtzfW0w@mail.gmail.com/
Tested-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/e788aa927f6d827dd4ea1ed608fada79f2bab030.1744284228.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef86ab131d ]
When reparse point in SMB1 query_path_info() callback was detected then
query also for EA $LXDEV. In this EA are stored device major and minor
numbers used by WSL CHR and BLK reparse points. Without major and minor
numbers, stat() syscall does not work for char and block devices.
Similar code is already in SMB2+ query_path_info() callback function.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 16cb6b0509 ]
Like in UNICODE mode, SMB1 Session Setup Kerberos Request contains oslm and
domain strings.
Extract common code into ascii_oslm_strings() and ascii_domain_string()
functions (similar to unicode variants) and use these functions in
non-UNICODE code path in sess_auth_kerberos().
Decision if non-UNICODE or UNICODE mode is used is based on the
SMBFLG2_UNICODE flag in Flags2 packed field, and not based on the
capabilities of server. Fix this check too.
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 70289ae5ca ]
Do not leak the tgtport reference when the work is already scheduled.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b0b26ad0e1 ]
The reference counting code can be simplified. Instead taking a tgtport
refrerence at the beginning of nvmet_fc_alloc_hostport and put it back
if not a new hostport object is allocated, only take it when a new
hostport object is allocated.
Signed-off-by: Daniel Wagner <wagi@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27ce8299bc ]
User->user Spectre v2 attacks (including RSB) across context switches
are already mitigated by IBPB in cond_mitigation(), if enabled globally
or if either the prev or the next task has opted in to protection. RSB
filling without IBPB serves no purpose for protecting user space, as
indirect branches are still vulnerable.
User->kernel RSB attacks are mitigated by eIBRS. In which case the RSB
filling on context switch isn't needed, so remove it.
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Amit Shah <amit.shah@amd.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Link: https://lore.kernel.org/r/98cdefe42180358efebf78e3b80752850c7a3e1b.1744148254.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18bae0dfec ]
eIBRS protects against guest->host RSB underflow/poisoning attacks.
Adding retpoline to the mix doesn't change that. Retpoline has a
balanced CALL/RET anyway.
So the current full RSB filling on VMEXIT with eIBRS+retpoline is
overkill. Disable it or do the VMEXIT_LITE mitigation if needed.
Suggested-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Reviewed-by: Amit Shah <amit.shah@amd.com>
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Link: https://lore.kernel.org/r/84a1226e5c9e2698eae1b5ade861f1b8bf3677dc.1744148254.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc9fd3f984 ]
write_ibpb() does IBPB, which (among other things) flushes branch type
predictions on AMD. If the CPU has SRSO_NO, or if the SRSO mitigation
has been disabled, branch type flushing isn't needed, in which case the
lighter-weight SBPB can be used.
The 'x86_pred_cmd' variable already keeps track of whether IBPB or SBPB
should be used. Use that instead of hardcoding IBPB.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/17c5dcd14b29199b75199d67ff7758de9d9a4928.1744148254.git.jpoimboe@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 197c1eaa7b ]
When running the mincore_selftest on a system with an XFS file system, it
failed the "check_file_mmap" test case due to the read-ahead pages reaching
the end of the file. The failure log is as below:
RUN global.check_file_mmap ...
mincore_selftest.c:264:check_file_mmap:Expected i (1024) < vec_size (1024)
mincore_selftest.c:265:check_file_mmap:Read-ahead pages reached the end of the file
check_file_mmap: Test failed
FAIL global.check_file_mmap
This is because the read-ahead window size of the XFS file system on this
machine is 4 MB, which is larger than the size from the #PF address to the
end of the file. As a result, all the pages for this file are populated.
blockdev --getra /dev/nvme0n1p5
8192
blockdev --getbsz /dev/nvme0n1p5
512
This issue can be fixed by extending the current FILE_SIZE 4MB to a larger
number, but it will still fail if the read-ahead window size of the file
system is larger enough. Additionally, in the real world, read-ahead pages
reaching the end of the file can happen and is an expected behavior.
Therefore, allowing read-ahead pages to reach the end of the file is a
better choice for the "check_file_mmap" test case.
Link: https://lore.kernel.org/r/20250311080940.21413-1-qiuxu.zhuo@intel.com
Reported-by: Yi Lai <yi1.lai@intel.com>
Signed-off-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64a66e2c3b ]
When running as a PVH dom0 the ACPI tables exposed to Linux are (mostly)
the native ones, thus exposing the C and P states, that can lead to
attachment of CPU idle and frequency drivers. However the entity in
control of the CPU C and P states is Xen, as dom0 doesn't have a full view
of the system load, neither has all CPUs assigned and identity pinned.
Like it's done for classic PV guests, prevent Linux from using idle or
frequency state drivers when running as a PVH dom0.
On an AMD EPYC 7543P system without this fix a Linux PVH dom0 will keep the
host CPUs spinning at 100% even when dom0 is completely idle, as it's
attempting to use the acpi_idle driver.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250407101842.67228-1-roger.pau@citrix.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8c7a1ac88 ]
The regulator comment in of_gpio_set_polarity_by_property()
made on top of a couple of the cases, while Atmel HSMCI quirk
is not related to that. Make it clear by moving Atmel HSMCI
quirk up out of the scope of the regulator comment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250402122058.1517393-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3105f54a5 ]
The function returns bool so we should return false, not NULL. No
functional changes are expected.
Signed-off-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 62baf70c32 ]
When scanning for new namespaces we might have missed an ANA AEN.
The NVMe base spec (NVMe Base Specification v2.1, Figure 151 'Asynchonous
Event Information - Notice': Asymmetric Namespace Access Change) states:
A controller shall not send this even if an Attached Namespace
Attribute Changed asynchronous event [...] is sent for the same event.
so we need to re-read the ANA log page after we rescanned the namespace
list to update the ANA states of the new namespaces.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3666ed8218 ]
KIQ invalidate_tlbs request has been seen to marginally exceed the
configured 100 ms timeout on systems under load.
All other KIQ requests in the driver use a 10 second timeout. Use a
similar timeout implementation on the invalidate_tlbs path.
v2: Poll once before msleep
v3: Fix return value
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Cc: Kent Russell <kent.russell@amd.com>
Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7ab4f0e37a ]
The end of table checks should be done with the structure size,
but 2 of the 3 similar calls use the pointer size.
Signed-off-by: Jean-Marc Eurin <jmeurin@google.com>
Link: https://patch.msgid.link/20250402001542.2600671-1-jmeurin@google.com
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b988685388 ]
When AC adapter is unplugged or plugged in EC wakes from HW sleep but
APU doesn't enter back into HW sleep.
The reason this happens is that, when the APU exits HW sleep, the power
rails controlled by the EC will power up the TCON. The TCON has a GPIO
that will be toggled at this time. The GPIO is not marked as a wakeup
source, but the GPIO controller still has an unserviced interrupt.
Unserviced interrupts will block entering HW sleep again. Clearing the
GPIO doesn't help as the TCON continues to assert it until it's been
initialized by i2c-hid.
Fixing this would require TCON F/W changes and it's already broken in
the wild on production hardware.
To avoid triggering this issue add a quirk to avoid letting EC wake
up system at all. The power button still works properly on this system.
Reported-by: Antheas Kapenekakis <lkml@antheas.dev>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3929
Link: 95b93b2852
Co-developed-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Antheas Kapenekakis <lkml@antheas.dev>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20250401133858.1892077-1-superm1@kernel.org
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9546ad1a9b ]
Scanning for namespaces can take some time, so if the target is
reconfigured while the scan is running we may miss a Attached Namespace
Attribute Changed AEN.
Check if the NVME_AER_NOTICE_NS_CHANGED bit is set once the scan has
finished, and requeue scanning to pick up any missed change.
Signed-off-by: Hannes Reinecke <hare@kernel.org>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f2946bb17 ]
xen-acpi-processor functions under a PVH dom0 with only a
xen_initial_domain() runtime check. Change the Kconfig dependency from
PV dom0 to generic dom0 to reflect that.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Tested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <20250331172913.51240-1-jason.andryuk@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ba3a4ab76 ]
Move the get_ctx(child_ctx) call and the child_event->ctx assignment to
occur immediately after the child event is allocated. Ensure that
child_event->ctx is non-NULL before any subsequent error path within
inherit_event calls free_event(), satisfying the assumptions of the
cleanup code.
Details:
There's no clear Fixes tag, because this bug is a side-effect of
multiple interacting commits over time (up to 15 years old), not
a single regression.
The code initially incremented refcount then assigned context
immediately after the child_event was created. Later, an early
validity check for child_event was added before the
refcount/assignment. Even later, a WARN_ON_ONCE() cleanup check was
added, assuming event->ctx is valid if the pmu_ctx is valid.
The problem is that the WARN_ON_ONCE() could trigger after the initial
check passed but before child_event->ctx was assigned, violating its
precondition. The solution is to assign child_event->ctx right after
its initial validation. This ensures the context exists for any
subsequent checks or cleanup routines, resolving the WARN_ON_ONCE().
To resolve it, defer the refcount update and child_event->ctx assignment
directly after child_event->pmu_ctx is set but before checking if the
parent event is orphaned. The cleanup routine depends on
event->pmu_ctx being non-NULL before it verifies event->ctx is
non-NULL. This also maintains the author's original intent of passing
in child_ctx to find_get_pmu_context before its refcount/assignment.
[ mingo: Expanded the changelog from another email by Gabriel Shahrouzi. ]
Reported-by: syzbot+ff3aa851d46ab82953a3@syzkaller.appspotmail.com
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Link: https://lore.kernel.org/r/20250405203036.582721-1-gshahrouzi@gmail.com
Closes: https://syzkaller.appspot.com/bug?extid=ff3aa851d46ab82953a3
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 72070e57b0 ]
Commit 57ed58c132 ("selftests: ublk: enable zero copy for stripe target")
added test entry of test_stripe_04, but forgot to add the test script.
So fix the test by adding the script file.
Reported-by: Uday Shankar <ushankar@purestorage.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Uday Shankar <ushankar@purestorage.com>
Link: https://lore.kernel.org/r/20250404001849.1443064-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6da580ec65 ]
Currently, we don't allow the creation of a remote partition underneath
another local or remote partition. However, it is currently possible to
create a new local partition with an existing remote partition underneath
it if top_cpuset is the parent. However, the current cpuset code does
not set the effective exclusive CPUs correctly to account for those
that are taken by the remote partition.
Changing the code to properly account for those remote partition CPUs
under all possible circumstances can be complex. It is much easier to
not allow such a configuration which is not that useful. So forbid
that by making sure that exclusive_cpus mask doesn't overlap with
subpartitions_cpus and invalidate the partition if that happens.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c7fbae5bc ]
Restricted pointers ("%pK") are only meant to be used when directly
printing to a file from task context.
Otherwise it can unintentionally expose security sensitive,
raw pointer values.
Use regular pointer formatting instead.
Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Michael Mueller <mimu@linux.ibm.com>
Tested-by: Michael Mueller <mimu@linux.ibm.com>
Link: https://lore.kernel.org/r/20250217-restricted-pointers-s390-v1-2-0e4ace75d8aa@linutronix.de
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Message-ID: <20250217-restricted-pointers-s390-v1-2-0e4ace75d8aa@linutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 975776841e ]
kernel/sched/isolation.c obviously makes no sense without CONFIG_SMP, but
the Kconfig entry we have right now:
config CPU_ISOLATION
bool "CPU isolation"
depends on SMP || COMPILE_TEST
allows the creation of pointless .config's which cause
build failures.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250330134955.GA7910@redhat.com
Closes: https://lore.kernel.org/oe-kbuild-all/202503260646.lrUqD3j5-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82c09de2d4 ]
Without this dependency it's really puzzling when we bisect for a "bad"
commit in a series of sorttable change: when "git bisect" switches to
another commit, "make" just does nothing to vmlinux.
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 390513642e ]
io_uring always switches requests to atomic refcounting for iowq
execution before there is any parallilism by setting REQ_F_REFCOUNT,
and the flag is not cleared until the request completes. That should be
fine as long as the compiler doesn't make up a non existing value for
the flags, however KCSAN still complains when the request owner changes
oter flag bits:
BUG: KCSAN: data-race in io_req_task_cancel / io_wq_free_work
...
read to 0xffff888117207448 of 8 bytes by task 3871 on cpu 0:
req_ref_put_and_test io_uring/refs.h:22 [inline]
Skip REQ_F_REFCOUNT checks for iowq, we know it's set.
Reported-by: syzbot+903a2ad71fb3f1e47cf5@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d880bc27fb8c3209b54641be4ff6ac02b0e5789a.1743679736.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b7cbd9849 ]
Power-on Reset has a documented issue in PCF85063, refer to its datasheet,
section "Software reset":
"There is a low probability that some devices will have corruption of the
registers after the automatic power-on reset if the device is powered up
with a residual VDD level. It is required that the VDD starts at zero volts
at power up or upon power cycling to ensure that there is no corruption of
the registers. If this is not possible, a reset must be initiated after
power-up (i.e. when power is stable) with the software reset command"
Trigger SW reset if there is an indication that POR has failed.
Link: https://www.nxp.com/docs/en/data-sheet/PCF85063A.pdf
Signed-off-by: Lukas Stockmann <lukas.stockmann@siemens.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Link: https://lore.kernel.org/r/20250120093451.30778-1-alexander.sverdlin@siemens.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
