Currently, ffs_ep0_read() holds ffs->mutex when it prepares to go to
sleep waiting for an event. When no setup events are pending, it calls
wait_event_interruptible_exclusive_locked_irq() with the mutex still
held. The wait macro deliberately drops the waitqueue spinlock before
sleeping but does not drop the mutex.
If a userspace daemon is polling ep0 via read() and the gadget is
asynchronously torn down via configfs (e.g., echo "" > UDC), a
deadlock can occur:
1. The configfs teardown calls functionfs_unbind(), which queues a
FUNCTIONFS_UNBIND event.
2. The daemon wakes up, consumes the event, and drops the mutex.
3. However, if the daemon loops and immediately issues another read()
before exiting, it reacquires ffs->mutex and again goes into an
interruptible sleep.
4. Meanwhile, functionfs_unbind() continues execution and attempts to
acquire ffs->mutex to tear down ep0req.
5. The kernel deadlocks because the configfs thread is stuck in an
uninterruptible sleep waiting for the mutex, while the userspace
daemon is in an interruptible sleep holding the mutex forever
because no more events will arrive.
To fix this, we drop both the waitqueue spinlock and ffs->mutex before
going to sleep, and use wait_event_interruptible_exclusive() instead.
Upon waking up, we jump back to the `retry` label to safely reacquire
the mutex and re-evaluate the state machine. By not sleeping with
ffs->mutex held, we natively decouple gadget teardowns (which require
the mutex) from userspace polling.
Fixes: ddf8abd259 ("USB: f_fs: the FunctionFS driver")
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.1-pro
Signed-off-by: Neill Kapron <nkapron@google.com>
Link: https://patch.msgid.link/20260724204117.4036015-1-nkapron@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In polled-VBUS mode (board.vbus_pin && board.vbus_polled), probe arms a
self-restarting cycle: at91_vbus_timer() schedules vbus_timer_work, and
at91_vbus_timer_work() calls at91_vbus_update() and re-arms the timer via
mod_timer(). Both recover the same udc through container_of and dereference
it on every iteration.
Neither teardown path cancels this cycle. udc is devm-allocated, so it is
freed after at91udc_remove() returns, and is likewise freed when probe
fails and devres runs. A timer callback or work item that is pending or
running at either point dereferences the freed udc.
Add at91_udc_shutdown_vbus_timer() and call it from at91udc_remove() and
from the usb_add_gadget_udc() failure path in probe; the remaining probe
error paths fail before the timer is armed. timer_shutdown_sync() waits
for a running callback and clears timer->function, which makes the work
handler's mod_timer() a permanent no-op; cancel_work_sync() then drains
any pending or running work whose re-arm attempt now does nothing. The
timer must be shut down first, since cancelling the work alone would let
the timer re-queue it. The guard mirrors probe: in IRQ mode the timer and
work_struct are never initialized.
This does not require a fault; a normal driver unbind can interleave with
an already queued work item.
This issue was found by an in-house static analysis tool.
Fixes: 4037242c4f ("ARM: 6209/3: at91_udc: Add vbus polarity and polling mode")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Link: https://patch.msgid.link/20260719042839.3167094-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tbt_altmode_remove() drops the plug and cable references without
draining tbt->work. The work function dereferences those references,
and can also requeue itself in its error path. The VDM callbacks can
queue the same work item.
Disable and drain tbt->work before dropping the references. This waits
for an existing invocation and prevents subsequent schedule_work()
calls from queueing it during teardown.
This issue was found by an in-house static analysis tool and confirmed
by manual code review.
Fixes: 100e257386 ("usb: typec: Add driver for Thunderbolt 3 Alternate Mode")
Cc: stable@vger.kernel.org
Assisted-by: Codex:gpt-5.6
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260802014959.416687-1-fanwu01@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xHCI 1.0 allowed these pointers to be zero. Some Intel chipsets from the
era usually set it to zero, but sometimes (apparently) to the next TRB
after the one referenced by the previous transfer event on the endpoint.
Usually that's indeed the missed TD, but it may also be the last TRB of
a two-TRB TD already completed with Short Packet on its first TRB. Then
the driver skips all pending TDs, failing to find a match.
When handling Missed Service Error, scan TD list twice and only really
skip TDs in the second pass if the first pass found a match. This won't
catch bogus pointers to wrong TDs, but such a bug would be practically
impossible to detect automatically and isn't known to exist.
Reported-by: Bart Nagel <bart@tremby.net>
Closes: https://lore.kernel.org/linux-usb/al_hchyOdPoPWKEo@spiral/
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Fixes: d0b619599e ("usb: xhci: Expedite skipping missed isoch TDs on modern HCs")
Cc: stable@vger.kernel.org
Signed-off-by: Michal Pecio <michal.pecio@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-18-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
handle_port_status() drops every USB3 port event when xhci->shared_hcd is
NULL. The check dates from a time when xhci-plat always created a shared
hcd, so a NULL one could only mean the hcd had been removed.
Since commit 4736ebd7fc ("usb: host: xhci-plat: omit shared hcd if
either root hub has no ports") that is no longer true. A controller whose
USB2 root hub has no ports gets a single roothub, the USB3 rhub is served
by the main hcd, and shared_hcd stays NULL for the lifetime of the device.
Every SuperSpeed port event is then thrown away as bogus behind a debug
message, so devices never enumerate even though the port sees the device
and its change bits stay set:
0x006a1203 Powered Connected Enabled Link:U0 PortSpeed:4
Change: CSC WRC PRC PLC
Broadcom Northstar is such a controller. USB3 works there up to 5.15 and
stops working from 5.19 onwards.
Ask xhci_get_usb3_hcd() instead. It returns the shared hcd when there is
one, the main hcd when the USB2 root hub has no ports, and NULL once the
shared hcd is gone, which keeps the original meaning of the check.
Tested on an Asus RT-N18U (BCM47081), which has a single roothub. Before
the change nothing enumerates on the USB3 port; after it SuperSpeed
devices enumerate normally over repeated connect and disconnect cycles,
the change bits shown above clear, and USB2 is unaffected on both ports.
Fixes: 4736ebd7fc ("usb: host: xhci-plat: omit shared hcd if either root hub has no ports")
Cc: stable@vger.kernel.org
Signed-off-by: Semih Baskan <strst.gs@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-17-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Non-ASCII characters trigger git send-email to prompt for encoding on each
modification near them, which is unnecessary and annoying.
Using plain ASCII avoids these prompts and does not change its meaning.
This change only affects comments and has no functional impact.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-16-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 'xhci_virt_ep' struct currently contains a pointer to its parent
'xhci_hcd' struct. Since all endpoint-related structs are contained
within 'xhci_hcd', this pointer is redundant.
Remove the 'xhci' pointer from 'xhci_virt_ep' and instead pass it
explicitly to functions that require it, as some already do it.
This change reduces unnecessary complexity and aligns the code with
the rest of the xhci driver.
Memory impact:
For each device connected a struct 'xhci_virt_device' is allocated,
this struct conatains a 31 slot array of struct 'xhci_virt_ep'.
A USB hub consumes 1 slot, but every downstream device consumes
another slot.
This means that the total memory saved buy this patch is:
Devices * 31 * 8 bytes
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-15-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The function ring_doorbell_for_active_rings() rings the doorbell
for any rings with pending URBs. It has a trivial wrapper,
xhci_ring_doorbell_for_active_rings(), which takes the same
arguments and simply calls the former.
Since the wrapper adds no functionality, remove it and rename
ring_doorbell_for_active_rings() to xhci_ring_doorbell_for_active_rings().
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-14-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch aims to unify the format of register macros and masks within
the xHCI driver. Currently, register macros have inconsistent bit-field
masks, get macros, and set macros, with varying naming conventions and
functionalities.
==================== Proposal ====================
* Introduce a standardized approach by using only mask macros for each bit
field, leveraging GENMASK() for enhanced clarity.
#define HCC_MAX_PSA GENMASK(15, 12)
* Utilize FIELD_GET() and FIELD_PREP() macros directly in the C code for
getting and setting values, ensuring consistency and readability.
u32 psa = FIELD_GET(HCC_MAX_PSA, reg);
* Maintain exceptions for macros that perform custom operations.
#define CTX_SIZE(_hcc) (_hcc & HCC_64BYTE_CONTEXT ? 64 : 32)
* Note, while FIELD_*() macros are beneficial, I am not suggesting that
they should always be used. Instead, use them where they simplify the
code and eliminate the necessity for custom get/set macros.
In the example below, additional FIELD_PREP() or FIELD_MODIFY() is not
beneficial.
#define HCS_MAX_SCRATCHPAD(p) (FIELD_GET(HCS_MAX_SP_HI, (p)) << 5 | \
FIELD_GET(HCS_MAX_SP_LO, (p)))
==================== Improvements ====================
Simplified Macros:
By reducing custom macros, the code becomes more straightforward.
Macros FIELD_GET() and FIELD_PREP() are commonly used, which contributes
to the code readability and consistency.
$ git grep -n 'FIELD_GET' | wc -l
9027
$ git grep -n 'FIELD_PREP' | wc -l
15407
Consistent Return Type:
All bit macros will return unsigned 64-bit values, mitigating potential
cross-architecture issues.
Unified Bit Range Definition:
The mask macro will define bit ranges, eliminating separate definitions
for get/set macros. Because, FIELD_GET() & FIELD_PREP() use mask macro.
Cleaner header file with less macros:
Fewer macros result in a cleaner and more manageable header file.
Signed-off-by: Niklas Neronin <niklas.neronin@linux.intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-12-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
xhci_gen_setup() locates the operational registers using the capability
length read from the very first register:
xhci->op_regs = hcd->regs +
HC_LENGTH(readl(&xhci->cap_regs->hc_capbase));
If the controller is dead or has dropped off the bus, that read returns
~0, HC_LENGTH() truncates it to 0xff, and op_regs ends up 0xff bytes
past the page-aligned MMIO base, i.e. unaligned. The first access
through it, xhci_halt() -> xhci_handshake() reading op_regs->status, is
then an unaligned readl() on device memory. arm64 faults on unaligned
device accesses, so instead of xhci_handshake() catching the all-ones
value and returning -ENODEV, setup oopses:
xhci-pci-renesas 0005:08:00.0: Unable to change power state from D3cold to D0, device inaccessible
xhci-pci-renesas 0005:08:00.0: xHCI Host Controller
xhci-pci-renesas 0005:08:00.0: new USB bus registered, assigned bus number 1
Unable to handle kernel paging request at virtual address ffff80030a770103
ESR = 0x0000000096000021
FSC = 0x21: alignment fault
Internal error: Oops: 0000000096000021 [#1] SMP
pc : xhci_halt [xhci_hcd]
Call trace:
xhci_halt
xhci_gen_setup
xhci_pci_setup
usb_add_hcd
usb_hcd_pci_probe
xhci_pci_common_probe
xhci_pci_renesas_probe
This was hit with a Renesas uPD720201 that failed to power up ("Unable
to change power state from D3cold to D0, device inaccessible") yet still
reached the HCD probe path.
Read the capability register once, and if it reads back the all-ones
value (as xhci_handshake() and xhci_reset() already test for), abort
setup with -ENODEV before op_regs is derived from it. Reading it once
also avoids re-reading a register that may change under a concurrent
hot-removal.
Fixes: 66d4eadd8d ("USB: xhci: BIOS handoff and HW initialization.")
Cc: stable@vger.kernel.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-11-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
idr_destroy() is already called on error paths in dbc_tty_init(). Do not
call it again on exit. For symmetry with the init side, also use
IS_ERR_OR_NULL() to gate the exit steps.
Signed-off-by: Lucas De Marchi <ldemarchi@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-10-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure to set dbc_tty_driver to NULL to match the check in
dbc_tty_exit(). For that, make detached error handling path common to the
other branch in the same function.
Fixes: 4521f16139 ("xhci: dbctty: split dbc tty driver registration and unregistration functions.")
Cc: stable@vger.kernel.org # v5.10
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lucas De Marchi <ldemarchi@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If tty_register_driver() fails, it drops the reference, but fails to set
the global dbc_tty_driver to NULL, causing the unregister to be called
again when module exits.
On module unload dbc_tty_exit() only gates its cleanup on the driver
pointer being non-NULL, so it operates on the already-freed driver:
module_init(xhci_hcd_init)
xhci_hcd_init()
xhci_dbc_init() [return value ignored]
dbc_tty_init()
tty_register_driver() fails
tty_driver_kref_put() -> driver freed
(dbc_tty_driver left dangling)
...
module_exit(xhci_hcd_fini)
xhci_hcd_fini()
xhci_dbc_exit()
dbc_tty_exit()
if (dbc_tty_driver) -> true (dangling)
tty_unregister_driver() -> use-after-free
Fixes: 4521f16139 ("xhci: dbctty: split dbc tty driver registration and unregistration functions.")
Cc: stable@vger.kernel.org # v5.10
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Lucas De Marchi <ldemarchi@nvidia.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-8-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If a ring stops on a TD that is about to be cancelled then the xHC ring
hardware dequeue pointer needs to move past the TD to flush TRBs from
xHC cache.
The TRB after the cancelled TD might be a no-op TRB, or a link TRB.
Moving the dequeue to a link TRB has caused isses on some hosts, and
moving it to a no-op TRB can be an issue for control endpoints as
xhci specification 4.8.3 'Endpoint Context State" states that
The Default Control Endpoint shall return to the Running state when the
Doorbell is rung for the next Setup Stage TD sent to the endpoint.
Solve this by always moving the dequeue pointer to the next valid
TD. If ring is empty and there are no queued TDs then move the dequeue
pointer to the enqueue pointer.
If enqueue points to a link TRB on a empty ring then propagate enqueue
to next segment before pointing dequeue to it.
Note that this patch ended up almost identical to a simplifiaction patch
done earlier by Michal Pecio, see link. That patch was not added due to a
potential, somewhat theoretical issue of moving dequeue backwards.
Turns out improving cancelled control transfers end up with the same code,
and is now worth taking.
Code is very likely subconsciously based the patch by Michal Pecio.
Link: https://lore.kernel.org/linux-usb/20250225125939.7a248e38@foxbook/
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Avoid all extra endpoint state changes after the roothub link
is lost due to disconnect or link error, and endpoint is known
to be in a non-running state.
Rapid endpoint state changes involving endpoint reset, restart, and
stopping the endpoint have caused xHC failures to complete stop
endpoint command. xhci driver sees this as a fatal flaw and tears
down xhci.
These endpoint state changes are normally part of recovery from
transaction errors or URB cancel.
In this case recovery is not needed.
Add an endpoint state called EP_DROP_PENDING.
Set ep->ep_state |= EP_DROP_PENDING when an endpoint is found in a
halted or stopped non-running state, and the roothub link is
lost. Prevent endpoint from restarting.
URB cancel doesn't need to stop the endpoint if EP_DROP_PENDONG is set.
URBs can be given back directly.
Endpoint is, and will remain stopped until it's dropped.
Tested-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-6-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Prevent transfer retry and endpoint recovery if the device or its parent
disconnected from the roothub. Just like link error case.
There is a suspicion some xHC controllers may stop processing endpoint
related commands after the last USB device disconnects from the host.
Disconnect often causes transaction errors, xhci driver tries to (soft)
reset and restart the endpoint to recover it.
Hub driver again will cancel all pending URBs once disconnect is detected,
stopping the endpoint right after (soft) reset restarted it.
xHC controller sometimes fail to complete the stop endpoint command,
leading to driver timing out, and tearing down xhci
Prevent extra endpoint (soft) reset after xhci driver is aware of the
parent roothub port disconnect.
Tested-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver already prevents useless transfer retry and endpoint recovery
for devices directly connected to a root port with link errors.
These devices are either disconnecting or will be reset. Link is gone.
Move the flag indicating link error from the xhci device structure to
the root port strucure, allowing all child devices behind hubs to easily
check for root port link errors, avoiding useless transfer retries and
endpoint recovery.
This extends the previous endpoint recovery prevention in
commit b8c3b71808 ("usb: xhci: Don't try to recover an endpoint if port
is in error state.")
Only root port link errors can be detected early by xhci driver,
not link errors between external hubs and their children.
Tested-by: Xu Rao <raoxu@uniontech.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-4-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The frame id field can be set for the first TD of the first isoc
URB to schedule the start of an isoc stream even in host doesn't
support CFC (Contiguous Frame ID Capability)
Set the frame ID TRB field of the first isoc TD unless URB has the
schedule immediately 'URB_ISO_ASAP' transfer flag set.
cc: Dylan Robinson <dylan_robinson@motu.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Check if the expected frame IDs for a isochronous URB submitted
mid stream is within the valid frame time window that xHC controller
is capable of queuing TDs.
The range only needs to be checked once per URB as the isoc TDs of an
URB are queued in one go with spinlock held and interrupts disabled.
Calculate the valid frame window start and end frame id in frames
instead of microframes to better match how xhci specification
section 4.11.2.5 does it.
Don't add frame id gaps or change scheduling to SIA mid stream if
the start frame is outside the valid frame winow.
Only print a debug message.
Some devices can't handle gaps in isochronous transfers.
Calculate a valid start frame for the first URB of a stream, and
align it to a full frame, or to interval start if interval is longer
than a frame
Set urb->start_frame value for every URB
cc: Dylan Robinson <dylan_robinson@motu.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260806142113.2436238-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Here are the USB serial updates for 7.3-rc1, including:
- fix digi_acceleport port registration order
- stop digi_acceleport I/O when ports are closed
- fix digi_acceleport OOB port dev_printk()
- fix metro-usb unthrottle race
- fix option slab OOB read with malicious devices
- add support for a new class of Prolific PL256X devices
Included are also various clean ups.
All have been in linux-next with no reported issues.
-----BEGIN PGP SIGNATURE-----
iJEEABYKADkWIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCanx8jhsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIACgkQC8XNwux9ZQgLawD/c6N+U30HtX8XToVPvdur
+QJeRlxiRjJR34ObmZMmDOgBAIm03twNNY3lGj1oagSGYkJ7HaB00lU4AEn+RlAU
3WEK
=CRDf
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial updates for 7.3-rc1
Here are the USB serial updates for 7.3-rc1, including:
- fix digi_acceleport port registration order
- stop digi_acceleport I/O when ports are closed
- fix digi_acceleport OOB port dev_printk()
- fix metro-usb unthrottle race
- fix option slab OOB read with malicious devices
- add support for a new class of Prolific PL256X devices
Included are also various clean ups.
All have been in linux-next with no reported issues.
* tag 'usb-serial-7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: pl2303: add support for PL256X multi-port devices
USB: serial: option: fix slab OOB read in interrupt URB callback
USB: serial: keyspan_pda: drop unused driver data usb-serial pointer
USB: serial: metro-usb: drop redundant initialisations
USB: serial: metro-usb: fix unthrottle race
USB: serial: metro-usb: replace unnecessary atomic allocation
USB: serial: digi_acceleport: fix oob port dev_printk()
USB: serial: digi_acceleport: clean up inb command submission
USB: serial: digi_acceleport: clean up write completion
USB: serial: digi_acceleport: clean up xfer buf length expression
USB: serial: digi_acceleport: drop unused in-buf define
USB: serial: digi_acceleport: stop OOB I/O when not in use
USB: serial: digi_acceleport: drop redundant driver data sanity checks
USB: serial: digi_acceleport: clean up declarations and whitespace
USB: serial: digi_acceleport: add oob port helper
USB: serial: digi_acceleport: always stop write urb on close
USB: serial: digi_acceleport: drop unused wait queue
USB: serial: digi_acceleport: fix port registration order
USB: serial: digi_acceleport: do not log stopping of urbs as errors
Here is a fix for a long-standing issue in the spcp8x5 driver which
syzbot just started hitting and a change adding lockdep annotation to
digi_acceleport to suppress a false positive deadlock warning.
Note that only the digi_acceleport commit has been in linux-next (and
with no reported issues).
-----BEGIN PGP SIGNATURE-----
iJEEABYKADkWIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCanXwpBsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMiwyLDIACgkQC8XNwux9ZQhhtgD8Cup01TId2ScE+750zDMX
0rTVhmBkTQIVzX1FjVdG1zsA/jdPLkV9cXUQhkJDS5mIqLcCLU606omTWzdiBnsl
zI0P
=naXW
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-7.2-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next
Johan writes:
USB serial fixes for 7.2-rc7
Here is a fix for a long-standing issue in the spcp8x5 driver which
syzbot just started hitting and a change adding lockdep annotation to
digi_acceleport to suppress a false positive deadlock warning.
Note that only the digi_acceleport commit has been in linux-next (and
with no reported issues).
* tag 'usb-serial-7.2-rc7' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: spcp8x5: drop broken carrier detect support
USB: serial: digi_acceleport: add port lock nesting annotation
- Fix use-after-free in eventfs_remove_rec()
The freeing of the eventfs_inode children used list_for_each_entry() where
the child is freed via srcu, but there's still a chance that it gets freed.
It should be using list_for_each_entry_safe().
- Fix eventfs_inode SRCU use of list in freeing
The iterator uses an SRCU protected list walk on the eventfs inodes. The
eventfs inode uses its "list" field in a union with the RCU list head.
When the inode gets added to the SRCU list it immediately corrupts the
list pointer and can cause an issue with the iterator. Move the RCU list
head to be shared with the children list head which allows the iterator to
check the parent inode if is freed before referencing the child. Have the
iterator check the parent "is_freed" field and break out if it is set.
Also add memory barriers to make sure the ordering is correct.
- Fix various RCU synchronization issues with direct_functions
Updates to direct_functions have some missing RCU protection and
synchronization. Restructure the code a bit to make sure updates to the
direct_functions are protected.
- Remove an unneeded comma from a scope_guard()
There's a spurious comma in a scope_guard(). Remove it.
- Fix race in per CPU buffer swap in the ring buffer
When a per CPU buffer swap happens, it must make sure that it doesn't
occur while a writer is active. Instead it returns an -EBUSY. But there's
a small race window when a writer moves from one sub-buffer to the next
that it resets the "committing" counter. If a swap happens at that moment,
the buffer used for the commit of an event will not match the buffer the
event is actually on. Instead of using the "committing" counter, use the
recursive detection counter that does not get reset when the writer
crosses sub-buffers.
- Fix off-by-one in ftrace_free_mem()
The function ftrace_free_mem() gets an "end_ptr" as a parameter that is
exclusive to the rang to be freed. But its value is used to search for the
records that expects an inclusive value. Subtract one from the parameter
to convert it to an inclusive range.
- Disable resizing of the ring buffer for persistent buffers
Resizing the persistent buffer has undefined behavior. Prevent it from
being resized.
- Disable changing ring buffer subbuf order when resizing is disabled
The ring buffer subbuffer order can not be changed during resizing. Use
that instead of just checking if the buffer is mapped as mapped buffers
also have resizing disabled.
- Initialize subbuf_order of reader pages when they are created
In rb_allocate_cpu_buffer() the bpage->order is not updated to the current
subbuf_order leaving it as zero. This value is used when the page is freed.
- Fix test_ringbuffer() to test for ERR_PTR before calling kthread_stop()
The rb_threads[] array is assigned the output of kthread_run_on_cpu()
which could return an ERR_PTR. At the end of the test, all threads in the
array are cleaned up by kthread_stop() passing in the value in the array
if it isn't zero. But if the array contains an ERR_PTR, kthread_stop()
will not be able to handle it properly.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCanicmBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6quonAP9HgM214Bt43edhuJb3oFy9fdS+sqYZ
RIJ9q90iMDUH0AEAk3650lu7u80YniD4INKNrz5QMM2EbIMaNqtqwkS8uwQ=
=tZwi
-----END PGP SIGNATURE-----
Merge tag 'trace-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix use-after-free in eventfs_remove_rec()
The freeing of the eventfs_inode children used list_for_each_entry()
where the child is freed via srcu, but there's still a chance that it
gets freed. It should be using list_for_each_entry_safe().
- Fix eventfs_inode SRCU use of list in freeing
The iterator uses an SRCU protected list walk on the eventfs inodes.
The eventfs inode uses its "list" field in a union with the RCU list
head. When the inode gets added to the SRCU list it immediately
corrupts the list pointer and can cause an issue with the iterator.
Move the RCU list head to be shared with the children list head which
allows the iterator to check the parent inode if is freed before
referencing the child. Have the iterator check the parent "is_freed"
field and break out if it is set. Also add memory barriers to make
sure the ordering is correct.
- Fix various RCU synchronization issues with direct_functions
Updates to direct_functions have some missing RCU protection and
synchronization. Restructure the code a bit to make sure updates to
the direct_functions are protected.
- Remove an unneeded comma from a scope_guard()
There's a spurious comma in a scope_guard(). Remove it.
- Fix race in per CPU buffer swap in the ring buffer
When a per CPU buffer swap happens, it must make sure that it doesn't
occur while a writer is active. Instead it returns an -EBUSY. But
there's a small race window when a writer moves from one sub-buffer
to the next that it resets the "committing" counter. If a swap
happens at that moment, the buffer used for the commit of an event
will not match the buffer the event is actually on. Instead of using
the "committing" counter, use the recursive detection counter that
does not get reset when the writer crosses sub-buffers.
- Fix off-by-one in ftrace_free_mem()
The function ftrace_free_mem() gets an "end_ptr" as a parameter that
is exclusive to the rang to be freed. But its value is used to search
for the records that expects an inclusive value. Subtract one from
the parameter to convert it to an inclusive range.
- Disable resizing of the ring buffer for persistent buffers
Resizing the persistent buffer has undefined behavior. Prevent it
from being resized.
- Disable changing ring buffer subbuf order when resizing is disabled
The ring buffer subbuffer order can not be changed during resizing.
Use that instead of just checking if the buffer is mapped as mapped
buffers also have resizing disabled.
- Initialize subbuf_order of reader pages when they are created
In rb_allocate_cpu_buffer() the bpage->order is not updated to the
current subbuf_order leaving it as zero. This value is used when the
page is freed.
- Fix test_ringbuffer() to test for ERR_PTR before calling
kthread_stop()
The rb_threads[] array is assigned the output of kthread_run_on_cpu()
which could return an ERR_PTR. At the end of the test, all threads in
the array are cleaned up by kthread_stop() passing in the value in
the array if it isn't zero. But if the array contains an ERR_PTR,
kthread_stop() will not be able to handle it properly.
* tag 'trace-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Fix crash passing ERR_PTR to kthread_stop()
ring-buffer: Initialise reader page order in rb_allocate_cpu_buffer()
ring-buffer: Prevent subbuf order change when resizing is disabled
ring-buffer: Prevent resizing of persistent ring buffer
ftrace: Fix off-by-one fentry site disable in ftrace_free_mem()
ring-buffer: Use current_context for safe per-CPU buffer swap
ftrace: Drop extra comma in trace_buffered_event_enable
ftrace: Protect direct_functions in update_ftrace_direct_mod
ftrace: Protect direct_functions in update_ftrace_direct_del
ftrace: Protect direct_functions in ftrace_find_rec_direct
eventfs: Use children field for rcu head and add memory barriers
eventfs: Fix use-after-free in eventfs_remove_rec()
- Fix potential uninitialized memory reads and buffer overflows from
malformed zcrypt CCA and EP11 requests by properly validating lengths
and payloads
- Fix possible out of bounds accesses in zcrypt EP11 domain handling by
replacing fixed payload layout assumptions with parsing ASN.1 fields
with bounds checks
- Fix zcrypt CCA and EP11 request and reply buffer allocations missing
required 4-byte padding, and scrub the full allocation on release
- Fix zcrypt CCA and EP11 messages leaking up to 3 uninitialized bytes
of memory by zeroing trailing alignment padding
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmp4YYUACgkQjYWKoQLX
FBh1tgf/ZZMzYxWDawMfYg2SoE16aLEG6M+I8qa1EmpxCXwu2Evl17LdMtkZFL1C
ClDux15JGBhbpYyHyXhlsnUMRSHKLatLF2LU4KR6g3q5JgFcNRUVzSH8uuE40en5
UspMeEG09NENUJGveyZ8tEbGmkbI1hxAzicD4nRMTuin8VpXWKvHaNeQYXhkuDtr
5nuCiRmJUgMrwAVgtTXkdWzMaR0QwLWwkkLXLhnQk6NWyz1EhYmXWT+YG2axu7/y
KUWU5jEs1AutO7YUxgTzrvxjS4M5IbokSXNyTUlLUqmPzdbXVWrpuF0nFEorBCA3
TzA7NCaJAChYWFfg54zQYdd4ijnf2Q==
=iulo
-----END PGP SIGNATURE-----
Merge tag 's390-7.2-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Vasily Gorbik:
- Fix potential uninitialized memory reads and buffer overflows from
malformed zcrypt CCA and EP11 requests by properly validating lengths
and payloads
- Fix possible out of bounds accesses in zcrypt EP11 domain handling by
replacing fixed payload layout assumptions with parsing ASN.1 fields
with bounds checks
- Fix zcrypt CCA and EP11 request and reply buffer allocations missing
required 4-byte padding, and scrub the full allocation on release
- Fix zcrypt CCA and EP11 messages leaking up to 3 uninitialized bytes
of memory by zeroing trailing alignment padding
* tag 's390-7.2-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Pad trailing CCA or EP11 message with zeros
s390/zcrypt: Improve EP11 CPRB domain handling with ASN.1 parsing
s390/zcrypt: Improve EP11 CPRB length and overflow checks
s390/zcrypt: Improve CCA CPRB length and overflow checks
s390/zcrypt: Fix CPRB memory allocation in zcrypt misc code
In test_ringbuffer()'s out_free cleanup loop, the check
`!rb_threads[cpu]` only catches NULL entries and misses entries that
hold an ERR_PTR.
rb_threads[] is static, so unassigned slots are NULL. But when
kthread_run_on_cpu() fails for a cpu, it stores ERR_PTR(-ENOMEM) (or
-EINTR) in rb_threads[cpu] before the creation loop jumps to out_free.
That entry is non-NULL, so the old `!ptr` check does not break, and the
cleanup proceeds to call kthread_stop() on the ERR_PTR. kthread_stop()
then dereferences the bogus pointer, crashing the kernel during the
late_initcall self-test.
crash logs:
BUG: kernel NULL pointer dereference, address: 000000000000001c
Oops: 0002 [#1] SMP NOPTI
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 7.2.0-rc6-dirty #7 PREEMPT(lazy)
RIP: 0010:kthread_stop+0x2e/0x220
RBX: fffffffffffffff4
CR2: 000000000000001c
Call Trace:
<TASK>
test_ringbuffer+0x1ec/0x650
do_one_initcall+0x6c/0x2c0
kernel_init_freeable+0x21d/0x420
kernel_init+0x15/0x1c0
ret_from_fork+0x21b/0x320
</TASK>
Kernel panic - not syncing: Fatal exception
Cc: stable@vger.kernel.org
Fixes: 64ed3a049e ("ring-buffer: make use of the helper function kthread_run_on_cpu()")
Link: https://patch.msgid.link/20260807154145.2846521-2-sh_def@163.com
Signed-off-by: Hui Su <sh_def@163.com>
Reviewed-by: Vincent Donnefort <vdonnefort@google.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
In rb_allocate_cpu_buffer(), bpage->order was omitted, leaving it as 0.
This is an issue for a ring-buffer with subbufs bigger than PAGE_SIZE if
when freed: free_buffer_page() relies on this value. Align the value
with the actual allocation size (buffer::subbuf_order).
Cc: stable@vger.kernel.org
Fixes: f9b94daa54 ("ring-buffer: Set new size of the ring buffer sub page")
Link: https://patch.msgid.link/20260806211306.3704194-4-vdonnefort@google.com
Signed-off-by: Vincent Donnefort <vdonnefort@google.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a module's init text is freed, do_init_module() calls
ftrace_free_mem() with a half-open [start, end) range. However the
ftrace_cmp_recs() comparator treats the upper bound as inclusive, as all
its other users do, passing 'ip + size - 1'. So ftrace_free_mem() can
delete a record sitting exactly at 'end', which is outside the freed
range.
For a kernel without CFI or IBT, the first record of a function is at
the function start, which for the first function in a module is also the
base of its text allocation. As the module allocator packs its regions,
that address is often the 'end' passed by a neighboring module's
do_init_module(), causing the first function's ftrace location to get
disabled, preventing an attempt to livepatch it:
livepatch: failed to find location for function 'pcspkr_probe'
Convert the exclusive end to the inclusive 'end - 1' the comparator
expects, and return early for an empty range to avoid the subtraction
from underflowing when the init text size is zero.
Cc: stable@vger.kernel.org
Fixes: 42c269c88d ("ftrace: Allow for function tracing to record init functions on boot up")
Link: https://patch.msgid.link/1b5ccfa8095bdb1277f84af1c2c2e2205aca03ae.1785992188.git.jpoimboe@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The ring_buffer_swap_cpu() function currently checks the per-CPU
committing counter to determine if a buffer is actively being written to
before performing the swap. However, there exists a race window where
this check can be bypassed:
ring_buffer_lock_reserve
cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_a
rb_reserve_next_event
rb_start_commit // inc committing
if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) {...}
__rb_reserve_next
rb_move_tail
rb_end_commit(cpu_buffer); // dec committing => 0
/* interrupt hits here, successfully swaps! */
local_inc(&cpu_buffer->committing);
ring_buffer_unlock_commit
cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_b
rb_commit
rb_end_commit
RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing))
// triggers warning
The committing counter can temporarily drop to 0 during a single write
operation (within rb_move_tail), creating a window where swap can
succeed even though the write is still in progress. This leads to
inconsistent buffer state and triggers the RB_WARN_ON in rb_commit().
Replace the committing counter check with current_context checks, which
are set at the entry of ring_buffer_lock_reserve() and remain valid
throughout the entire write operation, providing a reliable indicator of
buffer busy state during swap.
Cc: stable@vger.kernel.org
Fixes: 4239c38fe0 ("ring-buffer: Process commits whenever moving to a new page.")
Link: https://patch.msgid.link/20260803005640.2445666-2-wutengda@huaweicloud.com
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
that can cause stuck tasks (Yao Kai)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=3w7m
-----END PGP SIGNATURE-----
Merge tag 'locking-urgent-2026-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex fix from Ingo Molnar:
- Fix race in futex_pivot_pending() during private hash resize
that can cause stuck tasks (Yao Kai)
* tag 'locking-urgent-2026-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Fix race in futex_pivot_pending() during private hash resize
Here are some small USB and Thunderbolt driver fixes for 7.2-rc7 that
resolve some reported issues. Included in here are:
- new quirk for some broken USB devices
- thunderbolt device fixes for reported issues
- usb gadget driver fix
- usb atm driver fix
- xhci driver fixes.
- other minor USB driver fixes
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iGwEABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCandKCg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymavgCgzIiJ6KRqYmikyHsPpfL6GNYtOLAAmOwaDTWL
Zzvkgp8bIdQvqsPg6B0=
=lR2e
-----END PGP SIGNATURE-----
Merge tag 'usb-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 7.2-rc7 that
resolve some reported issues. Included in here are:
- new quirk for some broken USB devices
- thunderbolt device fixes for reported issues
- usb gadget driver fix
- usb atm driver fix
- xhci driver fixes.
- other minor USB driver fixes
All of these have been in linux-next this week with no reported
issues"
* tag 'usb-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci: use BIT_ULL for CRCR bits to fix incorrect 64bit mask
usb: quirks: Add ShanWan gamepad to quirk list
usb: hub: Split announce_device() to log device identity before enumeration
usb: core: Add quirk for 255-bytes initial config read
usb: atm: cxacru: properly kill rcv_urb on error in cxacru_cm()
usb: misc: usbio: check ibuf_len against rxbuf_len in bulk msg
usb: gadget: f_ncm: Use unsigned int for ndp_index
usb: cdnsp: fix incorrect endian conversions for APB timeout register
thunderbolt: Initialize ->domain_released completion before it is being used
thunderbolt: icm: Preserve USB4 proxy data-valid bit
thunderbolt: Bound the DROM dual link port number before indexing sw->ports
thunderbolt: Fix bandwidth group reservation indexing
thunderbolt: stream: Unmap buffers with mapped size
Here are some small serial and vt tty driver fixes for 7.2-rc7 that
resolve some reported problems. Included in here are:
- 2 vt core fixes
- amba-pl011 serial driver fixes
- 8250_of and 8250_dma driver fixes
- qcom-geni serial driver fix
- sc16is7xx serial driver fix
All of these have been in linux-next this week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCandKkg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylnjQCeND+mnhXzo7wmT4E2vHER2FG8UEEAmwXRTNe6
QzKAPXT2BgHPFW7Gy8dk
=UY5p
-----END PGP SIGNATURE-----
Merge tag 'tty-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial / vt driver fixes from Greg KH:
"Here are some small serial and vt tty driver fixes for 7.2-rc7 that
resolve some reported problems. Included in here are:
- two vt core fixes
- amba-pl011 serial driver fixes
- 8250_of and 8250_dma driver fixes
- qcom-geni serial driver fix
- sc16is7xx serial driver fix
All of these have been in linux-next this week with no reported
issues"
* tag 'tty-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: amba-pl011: synchronize DMA teardown
serial: amba-pl011: cancel RS485 hrtimers after freeing IRQ
serial: amba-pl011: fix indefinite RS485 post-send delay
vt: add permission check for KDSKBMETA ioctl
vt: stabilize tty reference in kbd_keycode with tty_port_tty_get
serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx
serial: qcom-geni: fix TX DMA buffer flush
serial: 8250_dma: Clear stale RX state on shutdown
serial: sc16is7xx: enable THRI before filling TX FIFO
Here are some more small staging driver fixes, just for the rtl8723bs
driver, for some reported problems found with it now that people are
starting to actually test the thing with "bad" networks.
Nothing major, but good to have in the -final release. All of these
have been in linux-next for over a week with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCandJYA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykIxACfTuHhJxAk0r/QsXGjmp/u8s733lYAnjVl7Kdm
v7Q+WL8+jJnxPW8jpWcy
=l2iZ
-----END PGP SIGNATURE-----
Merge tag 'staging-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are some more small staging driver fixes, just for the rtl8723bs
driver, for some reported problems found with it now that people are
starting to actually test the thing with "bad" networks.
Nothing major, but good to have in the -final release. All of these
have been in linux-next for over a week with no reported problems"
* tag 'staging-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8723bs: validate monitor transmit frame lengths
staging: rtl8723bs: fix missing shared-key auth challenge length check
staging: rtl8723bs: fix OOB read in WMM_param_handler()
staging: rtl8723bs: fix OOB read in rtw_get_wpa_ie()
Here are some small char/misc and nvmem and documentation fixes for
7.2-rc7 to resolve some reported issues. Included in here are:
- updates to the documentation for the kernel threat model and
security bugs to get the LLMs to actually follow what we have been
asking them to do (i.e. not claim security issues for things we do
not consider security issues.)
- nvmem driver fixes which required a tiny "layout" driver to be
added.
- fastrpc driver fixes
- mei driver fix
- counter driver fix
- binder driver fix
All of these have been in linux-next this week with no reported
problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCandLdw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yldzACZAVaM2/I0hIeTnoBqRFIZBcroUQYAoNk5zQSW
qYG0DWUf4LJwj9WPQWIS
=e+LJ
-----END PGP SIGNATURE-----
Merge tag 'char-misc-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc and documentation fixes from Greg KH:
"Here are some small char/misc and nvmem and documentation fixes for
7.2-rc7 to resolve some reported issues. Included in here are:
- updates to the documentation for the kernel threat model and
security bugs to get the LLMs to actually follow what we have been
asking them to do (i.e. not claim security issues for things we do
not consider security issues.)
- nvmem driver fixes which required a tiny "layout" driver to be
added.
- fastrpc driver fixes
- mei driver fix
- counter driver fix
- binder driver fix
All of these have been in linux-next this week with no reported
problems"
* tag 'char-misc-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
docs: security-bugs: clarify some mandatory steps for AI reports
docs: coding-assistant: explain important steps when looking for bugs
docs: security-bugs: clarify what counts as a valid version
docs: threat-model: move fake devices out of "non production use"
docs: threat-model: clarify "security bug" vs "vulnerability"
counter: microchip-tcb-capture: Fix DT channel validation
mei: pull kvfree out of spinlock
rust_binder: do not query current thread for all ioctls
nvmem: layouts: Add fixed-layout driver
nvmem: apple-spmi-nvmem: wrap regmap calls to satisfy CFI
misc: fastrpc: fix memory leak in fastrpc_channel_ctx_free
misc: fastrpc: fix channel ctx ref leak when session alloc fails
misc: fastrpc: take fl->lock when moving mmaps on interrupted invoke
misc: fastrpc: Remove buffer from list prior to unmap operation
misc: fastrpc: Fix initial memory allocation for Audio PD memory pool
Drop the extra comma in "scoped_guard()" to cleanup the code.
Link: https://patch.msgid.link/20260730150411.88667-5-leon.hwang@linux.dev
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Fix accessing the __rcu pointer direct_functions with RCU protection.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260730150411.88667-2-leon.hwang@linux.dev
Fixes: d05cb47066 ("ftrace: Fix modification of direct_function hash while in use")
Acked-by: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
A few patches for the core fbdev layer which stabilize or fix potential
issues with text font rendering after screen rotation or after user
initiated font changes and locking fixes for sysfb during modifications
of the graphics mode database.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCanbPzgAKCRD3ErUQojoP
XyrEAPwJgK7J9UvN1Ii0V9p175Z/3Mzwo6DF1Z4KW5ctYVTAsQD/TC91d1vqKtJ7
SHgY6jCLegC/DpLk4dqshBPrdO2pAgM=
=Y1ZB
-----END PGP SIGNATURE-----
Merge tag 'fbdev-for-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
"A few patches for the core fbdev layer which stabilize or fix
potential issues with text font rendering after screen rotation or
after user initiated font changes and locking fixes for sysfb during
modifications of the graphics mode database"
* tag 'fbdev-for-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: bitblit: bound-check glyph index in bit_cursor()
fbdev: Fix out-of-bounds access when rotating console after font resize
fbdev: core: Fix pointer desynchronization in fb_io_read()
fbdev: serialize mode sysfs access with lock_fb_info()
fbdev: clear fb_info->mode before deleting a videomode
fbdev: bound mode sysfs output to the sysfs buffer
When an eventfs inode is freed, it sets ei->is_freed and then uses its
ei->list to add it to the srcu link list as the list field is a union with
the rcu list head. As the ei->list is used to iterate over an SRCU
protected list without taking the eventfs_mutex, there's nothing stopping
the iteration over that list to see the ei->rcu instead of the ei->list
and it will read a corrupt target.
To fix this, change the union of the rcu list head with the children list.
On freeing the eventfs inode, set the is_free and execute a smp_wmb()
before adding the eventfs inode to the SRCU list.
On iteration of the ei->children list, at the start, execute a smp_rmb()
and then read the is_freed of the ei to see if the children list is still
valid. If is_freed is set, then the ei_child read is not valid and the
loop should exit immediately.
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260808094215.4252430d@robin
Fixes: 704f960dbe ("eventfs: Read ei->entries before ei->children in eventfs_iterate()")
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260806022719.375354-1-shuangpeng.kernel%40gmail.com
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
eventfs_remove_rec() recursively removes the child at the current loop
position. After the recursive call returns, list_for_each_entry() advances
by reading list.next from the removed child.
If free_ei() drops the final reference, release_ei() reuses the list/rcu
union to queue an SRCU callback. The child may be freed before that read.
The eventfs_mutex serializes list updates, but it does not keep the removed
child alive or prevent the SRCU callback from running.
Use list_for_each_entry_safe() to save the next sibling before recursively
removing the current child.
Cc: stable@vger.kernel.org
Fixes: 43aa6f97c2 ("eventfs: Get rid of dentry pointers without refcounts")
Link: https://patch.msgid.link/20260806022719.375354-1-shuangpeng.kernel@gmail.com
Signed-off-by: Shuangpeng Bai <shuangpeng.kernel@gmail.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
- Fix Rust build failure on s390 by gating ioremap() / iounmap() helpers
and the io::mem module on CONFIG_HAS_IOMEM; gate affected doctests as
well.
- Add missing kernel-doc for show_const / store_const union members in
struct device_attribute.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCancYdAAKCRBFlHeO1qrK
LneZAQD9bhMwOb9C8t+fLXEYd6WR+1n932bmKTBSscZ1evnojwD+M4MqTWDBDgal
Mc8wasHQsQc7pqVFFHtFEUIAZjRlpAc=
=KHk2
-----END PGP SIGNATURE-----
Merge tag 'driver-core-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Fix Rust build failure on s390 by gating ioremap() / iounmap()
helpers and the io::mem module on CONFIG_HAS_IOMEM; gate affected
doctests as well.
- Add missing kernel-doc for show_const / store_const union members in
struct device_attribute.
* tag 'driver-core-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
rust: io: gate ioremap doctests on CONFIG_HAS_IOMEM
rust: io: gate ioremap/iounmap on CONFIG_HAS_IOMEM
driver core: add missing kernel-doc for union members
- Fixes for information leaks and OOB accesses across several drivers,
including evdev, focaltech, edt-ft5x06, iforce, and cs40l50-vibra
- Improvements to the synaptics-rmi4 driver to properly handle F54
worker errors and prevent buffer overflows
- Input validation fixes in the hynitron_cstxxx touchscreen driver to
prevent issues with invalid finger IDs and touch counts
- Fixes for use-after-free and initialization bugs in the byd mouse
and psxpad-spi drivers
- New quirks for the atkbd driver to make keyboard work on HONOR and
Xiaomi laptops
- Support for the ZENAIM LEVERLESS controller in the xpad driver.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCana8zQAKCRBAj56VGEWX
nAIMAQCFKhBk3M4Q+625XmMMcb9AV+Bl0TTCxXBbdrA8bYJ+IQEA0C9AQXCmIGzC
lwr7jlgTET8vN/NrEVD+WN9jNzFmZgA=
=jcbm
-----END PGP SIGNATURE-----
Merge tag 'input-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- Fixes for information leaks and OOB accesses across several drivers,
including evdev, focaltech, edt-ft5x06, iforce, and cs40l50-vibra
- Improvements to the synaptics-rmi4 driver to properly handle F54
worker errors and prevent buffer overflows
- Input validation fixes in the hynitron_cstxxx touchscreen driver to
prevent issues with invalid finger IDs and touch counts
- Fixes for use-after-free and initialization bugs in the byd mouse and
psxpad-spi drivers
- New quirks for the atkbd driver to make keyboard work on HONOR and
Xiaomi laptops
- Support for the ZENAIM LEVERLESS controller in the xpad driver.
* tag 'input-for-v7.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: evdev - sanitize event type index when fetching event masks
Input: synaptics-rmi4 - propagate F54 worker errors to V4L2 queue
Input: synaptics-rmi4 - block s_input when F54 queue is busy
Input: synaptics-rmi4 - bound the F54 report size to the allocated buffer
Input: synaptics-rmi4 - zero report size on F54 work error
Input: synaptics-rmi4 - fix F55 transmitter electrode count typo
Input: hynitron_cstxxx - validate touch count and finger IDs
Input: evdev - fix information leak in evdev_pass_values()
fixp-arith: convert comments to kernel-doc format
Input: focaltech - fix array out-of-bounds in focaltech_process_rel_packet
Input: atkbd - skip deactivate for HONOR ZQC-P
Input: atkbd - skip deactivate for Xiaomi Book Pro 14's internal keyboard
Input: iforce - validate input packet lengths
Input: psxpad-spi - set driver data before use
Input: cs40l50-vibra - validate custom data from user space
Input: xpad - add support for ZENAIM LEVERLESS
Input: edt-ft5x06 - ignore contacts with an out-of-range slot id
Input: byd - synchronize timer deletion before freeing private data
- Couple of fixes for mem leak and underflow case
Thanks to: George Wilson, R Nageswara Sastry
-----BEGIN PGP SIGNATURE-----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=HV3X
-----END PGP SIGNATURE-----
Merge tag 'powerpc-7.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Madhavan Srinivasan:
- A couple of fixes for a memory leak and a underflow case
Thanks to George Wilson and R Nageswara Sastry
* tag 'powerpc-7.2-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/pseries: lparcfg - fix kbuf[] underflow
powerpc/pseries: pci - logic bug
powerpc/pseries: papr-phy-attest - validate cmd.length, plug mem leak
