Add a flag to signal to the RPC layer that the credential is already
pinned for the duration of the RPC call.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we're creating a nfs_open_context() for a specific file pointer,
we must use the cred assigned to that file.
Fixes: a52458b48a ("NFS/NFSD/SUNRPC: replace generic creds with 'struct cred'.")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We can't allow delegreturn to hold up nfs4_evict_inode() forever,
since that can cause the memory shrinkers to block. This patch
therefore ensures that we eventually time out, and complete the
reclaim of the inode.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the cred assigned to the layout that we're updating differs from
the one used to retrieve the new layout segment, then we need to
update the layout plh_lc_cred field.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the cred assigned to the delegation that we're updating differs
from the one we're updating too, then we need to update that field
too.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When we're running as a 64-bit architecture and are not running in
32-bit compatibility mode, it is better to use the 64-bit readdir
cookies that supplied by the server. Doing so improves the accuracy
of telldir()/seekdir(), particularly when the directory is changing,
for instance, when doing 'rm -rf'.
We still fall back to using the 32-bit offsets on 32-bit architectures
and when in compatibility mode.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
dm timer ops set_load() api allows to configure the load value and to
set the auto reload feature. But auto reload feature is independent of
load value and should be part of configuring pwm. This way pwm can be
disabled by disabling auto reload feature using set_pwm() so that the
current pwm cycle will be completed. Else pwm disabling causes the
cycle to be stopped abruptly.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200305082715.15861-7-lokeshvutla@ti.com
omap_dm_timer_ops provide support to configure the pwm but there is no
support to get the current status. For configuring pwm it is advised to
check the current hw status instead of relying on pwm framework. So
implement a new timer ops to get the current status of pwm.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Tony Lindgen <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200305082715.15861-6-lokeshvutla@ti.com
Write to trigger register(OMAP_TIMER_TRIGGER_REG) will load the value
in Load register(OMAP_TIMER_LOAD_REG) into Counter register
(OMAP_TIMER_COUNTER_REG).
omap_dm_timer_set_load() writes into trigger register every time load
register is updated. When timer is configured in pwm mode, this causes
disruption in current pwm cycle, which is not expected especially when
pwm is used as PPS signal for synchronized PTP clocks. So do not write
into trigger register on updating the period.
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200305082715.15861-5-lokeshvutla@ti.com
omap_dm_timer_enable() restores the entire context(including counter)
based on 2 conditions:
- If get_context_loss_count is populated and context is lost.
- If get_context_loss_count is not populated update unconditionally.
Case2 has a side effect of updating the counter register even though
context is not lost. When timer is configured in pwm mode, this is
causing undesired behaviour in the pwm period.
Instead of using get_context_loss_count call back, implement cpu_pm
notifier with context save and restore support. And delete the
get_context_loss_count callback all together.
Suggested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[tony@atomide.com: removed pm_runtime calls from cpuidle calls]
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200316111453.15441-1-lokeshvutla@ti.com
Let's add runtime_suspend and resume functions and atomic enabled
flag. This way we can use these when converting to use cpuidle
for saving and restoring device context.
And we need to maintain the driver state in the driver as documented
in "9. Autosuspend, or automatically-delayed suspends" in the
Documentation/power/runtime_pm.rst document related to using driver
private lock and races with runtime_suspend().
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200305082715.15861-3-lokeshvutla@ti.com
Use SPDX-License-Identifier instead of a verbose license text.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200305082715.15861-2-lokeshvutla@ti.com
The RTC IRQ is requested before the struct rtc_device is allocated,
this may lead to a NULL pointer dereference in the IRQ handler.
To fix this issue, allocating the rtc_device struct before requesting
the RTC IRQ using devm_rtc_allocate_device, and use rtc_register_device
to register the RTC device.
Also remove the unnecessary error message as the core already prints the
info.
Link: https://lore.kernel.org/r/20200311223956.51352-1-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Generic clock rate needs to be set in case it was selected as timer clock
source in mchp_pit64b_init_mode(). Otherwise it will be enabled with wrong
rate.
Fixes: 625022a5f1 ("clocksource/drivers/timer-microchip-pit64b: Add Microchip PIT64B support")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1584352376-32585-1-git-send-email-claudiu.beznea@microchip.com
The bspec documents multiple MCR ranges; make sure they're all captured
by the driver.
Bspec: 13991, 52079
Fixes: 592a7c5e08 ("drm/i915: Extend non readable mcr range")
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311162300.1838847-2-matthew.d.roper@intel.com
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
(cherry picked from commit 415d126997)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
This reverts commit 36a6b5d964.
The commit takes care Wa_1604544889 which was fixed on a0 stepping based on
a0 replan. So no SW workaround is required on any stepping now.
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Caz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Fixes: 36a6b5d964 ("drm/i915/tgl: Add extra hdc flush workaround")
Link: https://patchwork.freedesktop.org/patch/msgid/1c751032ce79c80c5485cae315f1a9904ce07cac.1583359940.git.caz.yokoyama@intel.com
(cherry picked from commit 175c4d9b3b)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Record the initial active element we use when building the next ELSP
submission, so that we can compare against it latter to see if there's
no change.
Fixes: 44d0a9c05b ("drm/i915/execlists: Skip redundant resubmission")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200311092624.10012-2-chris@chris-wilson.co.uk
(cherry picked from commit 60ef5b7ac6)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The vti6_rcv function performs some tests on the retrieved tunnel
including checking the IP protocol, the XFRM input policy, the
source and destination address.
In all but one places the skb is released in the error case. When
the input policy check fails the network packet is leaked.
Using the same goto-label discard in this case to fix this problem.
Fixes: ed1efb2aef ("ipv6: Add support for IPsec virtual tunnel interfaces")
Signed-off-by: Torsten Hilbrich <torsten.hilbrich@secunet.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Document the binding for MT2712 RTC implemented by rtc-mt2712.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Ran Bi <ran.bi@mediatek.com>
Link: https://lore.kernel.org/r/20200226051303.22560-2-ran.bi@mediatek.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Some boards, like OrangePi PC2 (H5), OrangePi Plus 2E (H3) and Tanix TX6
(H6) don't have external 32kHz oscillator. Till H6, it didn't really
matter if external oscillator was enabled because HW detected error and
fall back to internal one. H6 has same functionality but it's the first
SoC which have "auto switch bypass" bit documented and always enabled in
driver. This prevents RTC to work correctly if external crystal is not
present on board. There are other side effects - all peripherals which
depends on this clock also don't work (HDMI CEC for example).
Make clocks property optional. If it is present, select external
oscillator. If not, stay on internal.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/r/20200308135849.106333-2-jernej.skrabec@siol.net
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Call the 64bit versions of rtc_tm time conversion to allow extending
support after 2106 and properly supporting the STv2 range.
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200306005809.38530-3-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The PL031 and ST v1 RTC are 32bit seconds counters. STv2 is a BCD RTC
apparently going from 0000 to 9999, hopefully handling the leap days
properly until then.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200306005809.38530-2-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The datasheet states that 4052 is the maximum value for year. However, the
mpc5121 read_time and set_time function abuse the target time register
instead of using the broken down time so it is limited to 2106.
Link: https://lore.kernel.org/r/20200306074404.58909-3-alexandre.belloni@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
