The hsr_get_node_list() is to send node addresses to the userspace.
If there are so many nodes, it could fail because of buffer size.
In order to avoid this failure, the restart routine is added.
Fixes: f421436a59 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
hsr_get_node_{list/status}() are not under rtnl_lock() because
they are callback functions of generic netlink.
But they use __dev_get_by_index() without rtnl_lock().
So, it would use unsafe data.
In order to fix it, rcu_read_lock() and dev_get_by_index_rcu()
are used instead of __dev_get_by_index().
Fixes: f421436a59 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netlink support of extended packet number cipher suites,
allows adding and updating XPN macsec interfaces.
Added support in:
* Creating interfaces with GCM-AES-XPN-128 and GCM-AES-XPN-256 suites.
* Setting and getting 64bit packet numbers with of SAs.
* Setting (only on SA creation) and getting ssci of SAs.
* Setting salt when installing a SAK.
Added 2 cipher suite identifiers according to 802.1AE-2018 table 14-1:
* MACSEC_CIPHER_ID_GCM_AES_XPN_128
* MACSEC_CIPHER_ID_GCM_AES_XPN_256
In addition, added 2 new netlink attribute types:
* MACSEC_SA_ATTR_SSCI
* MACSEC_SA_ATTR_SALT
Depends on: macsec: Support XPN frame handling - IEEE 802.1AEbw.
Signed-off-by: Era Mayflower <mayflowerera@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Support extended packet number cipher suites (802.1AEbw) frames handling.
This does not include the needed netlink patches.
* Added xpn boolean field to `struct macsec_secy`.
* Added ssci field to `struct_macsec_tx_sa` (802.1AE figure 10-5).
* Added ssci field to `struct_macsec_rx_sa` (802.1AE figure 10-5).
* Added salt field to `struct macsec_key` (802.1AE 10.7 NOTE 1).
* Created pn_t type for easy access to lower and upper halves.
* Created salt_t type for easy access to the "ssci" and "pn" parts.
* Created `macsec_fill_iv_xpn` function to create IV in XPN mode.
* Support in PN recovery and preliminary replay check in XPN mode.
In addition, according to IEEE 802.1AEbw figure 10-5, the PN of incoming
frame can be 0 when XPN cipher suite is used, so fixed the function
`macsec_validate_skb` to fail on PN=0 only if XPN is off.
Signed-off-by: Era Mayflower <mayflowerera@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Disable the felix switch by default and enable it per board which are
actually using it.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that there is support for the Felix switch this variant can also be
added. It features two external ports ethernet ports which are connected
to the internal switch core. No direct connection to any of the enetc's
is supported.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The KBox A-230-LS supports four external ports which are connected to
the internal switch of the LS1028A via QSGMII. Now that the Felix switch
is supported, add these ports in the device tree.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The module itself has another EEPROM at 50h on I2C4. The EEPROM on the
carriers is located at 57h on I2C3. Fix that in the device trees.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is a SPI flash on this carrier connected to the third DSPI
controller. Add it.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per binding doc fsl,aips-bus.yaml, compatible and reg is
required. And for reg, the AIPS configuration space should be
used, not all the AIPS bus space.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To determine the build version of Bluetooth firmware to ensure reported
issue related to a particular release. This is very helpful for every fw
downloaded to BT controller and issue reported from field test.
Signed-off-by: Amit K Bag <amit.k.bag@intel.com>
Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Shift cases one level left. This makes the code more readable and some
lines need not wrap anymore.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200316065911.11024-3-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We have a helper called rounddown for these modulo computations. So use
it.
No functional change intended and "objdump -d" proves that.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200316065911.11024-2-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Instead of awkward ternary operator with comparison, use simple min()
for blankinterval and vesa_off_interval.
No functional change intended and "objdump -d" proves that.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20200316065911.11024-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As Joe suggests, dynamic debug can print module name and line number
along with message. So remove __FILE__ and __LINE__ from all those
pr_debug calls.
Out of curiosity, I measured the savings, 200 bytes of code are gone.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Suggested-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/20200316064910.4941-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The merge commit cb05c6c82f (Merge 5.6-rc5 into tty-next) introduced a
double lock to set_selection_kernel. vc_sel.lock is locked both in
set_selection_kernel and its callee __set_selection_kernel now.
Remove the latter.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20200316064544.4799-1-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/usb/gadget/legacy/Kconfig creates a 'choice' inside another
'choice'.
The outer choice: line 17 "USB Gadget precomposed configurations"
The inner choice: line 484 "EHCI Debug Device mode"
I wondered why the whole legacy gadget drivers reside in such a big
choice block.
This dates back to 2003, "[PATCH] USB: fix for multiple definition of
`usb_gadget_get_string'". [1]
At that time, the global function, usb_gadget_get_string(), was linked
into multiple drivers. That was why only one driver was able to become
built-in at the same time.
Later, commit a84d9e5361 ("usb: gadget: start with libcomposite")
moved usb_gadget_get_string() to a separate module, libcomposite.ko
instead of including usbstring.c from multiple modules.
More and more refactoring was done, and after commit 1bcce93947
("usb: gadget: multi: convert to new interface of f_mass_storage"),
you can link multiple gadget drivers into vmlinux without causing
multiple definition error.
This is the only user of the nested choice structure ever. Removing
this mess will make some Kconfig cleanups possible.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=fee4cf49a81381e072c063571d1aadbb29207408
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/20200315154948.26569-1-masahiroy@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
After merging the usb-gadget tree, today's linux-next build (arm
multi_v7_defconfig) failed like this:
drivers/usb/dwc3/drd.c: In function 'dwc3_setup_role_switch':
drivers/usb/dwc3/drd.c:551:23: error: assignment to 'usb_role_switch_set_t' {aka 'int (*)(struct usb_role_switch *, enum usb_role)'} from incompatible pointer type 'int (*)(struct device *, enum usb_role)' [-Werror=incompatible-pointer-types]
551 | dwc3_role_switch.set = dwc3_usb_role_switch_set;
| ^
drivers/usb/dwc3/drd.c:552:23: error: assignment to 'usb_role_switch_get_t' {aka 'enum usb_role (*)(struct usb_role_switch *)'} from incompatible pointer type 'enum usb_role (*)(struct device *)' [-Werror=incompatible-pointer-types]
552 | dwc3_role_switch.get = dwc3_usb_role_switch_get;
| ^
Caused by commit
8a0a137997 ("usb: dwc3: Registering a role switch in the DRD code.")
interacting with commit
bce3052f0c ("usb: roles: Provide the switch drivers handle to the switch in the API")
from the usb tree.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/20200316143752.473f1073@canb.auug.org.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lots of changes on dwc3 this time, most of them from Thinh fixing a
bunch of really old mishaps on the driver.
DWC2 got support for STM32MP15 and a couple RockChip SoCs while DWC3
learned about Amlogic A1 family.
Apart from these, we have a few spelling fixes and other minor
non-critical fixes all over the place.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
-----BEGIN PGP SIGNATURE-----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=L9gx
-----END PGP SIGNATURE-----
Merge tag 'usb-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
USB: changes for v5.7 merge window
Lots of changes on dwc3 this time, most of them from Thinh fixing a
bunch of really old mishaps on the driver.
DWC2 got support for STM32MP15 and a couple RockChip SoCs while DWC3
learned about Amlogic A1 family.
Apart from these, we have a few spelling fixes and other minor
non-critical fixes all over the place.
Signed-off-by: Felipe Balbi <balbi@kernel.org>
* tag 'usb-for-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (41 commits)
dt-bindings: usb: add documentation for aspeed usb-vhub
ARM: dts: aspeed-g4: add vhub port and endpoint properties
ARM: dts: aspeed-g5: add vhub port and endpoint properties
ARM: dts: aspeed-g6: add usb functions
usb: gadget: aspeed: add ast2600 vhub support
usb: gadget: aspeed: read vhub properties from device tree
usb: gadget: aspeed: support per-vhub usb descriptors
usb: gadget: f_phonet: Replace zero-length array with flexible-array member
usb: gadget: composite: Inform controller driver of self-powered
usb: gadget: amd5536udc: fix spelling mistake "reserverd" -> "reserved"
udc: s3c-hsudc: Silence warning about supplies during deferred probe
usb: dwc2: Silence warning about supplies during deferred probe
dt-bindings: usb: dwc2: add compatible property for rk3368 usb
dt-bindings: usb: dwc2: add compatible property for rk3328 usb
usb: gadget: add raw-gadget interface
usb: dwc2: Implement set_selfpowered()
usb: dwc3: qcom: Replace <linux/clk-provider.h> by <linux/of_clk.h>
usb: dwc3: core: don't do suspend for device mode if already suspended
usb: dwc3: Rework resets initialization to be more flexible
usb: dwc3: Rework clock initialization to be more flexible
...
This makes it possible to take advantage of the function in
the device drivers.
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20200302135353.56659-8-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ath.git patches for v5.7. Major changes:
ath10k
* support for getting btcoex settings from Device Tree
* support QCA9377 SDIO device
ath11k
* add HE rate accounting
* add thermal sensor and cooling devices
Enable soundwire, slimbus frameworks, the machine driver and the codec
drivers for WCD934x and WSA881x used on varios SDM845 based designs.
Tested-by: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20200315050827.1575421-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
With COMPILE_TEST, there will be build error, because IMX_SCU
might be set to n, so drop COMPILE_TEST.
Suggested-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add COMPILE_TEST support to IMX_SCU driver for better compile
testing coverage. Any driver depending on IMX_SCU shouldn't have
COMPILE_TEST though.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently we wait only until the PGC inverts the isolation setting
before disabling the peripheral clocks. This doesn't ensure that the
reset is properly propagated through the peripheral devices in the
power domain.
Wait until the PGC signals that the power up request is done and
wait a bit for resets to propagate before disabling the clocks.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The soc-imx8.c driver is actually for i.MX8M family, so rename it
to soc-imx8m.c.
Use CONFIG_SOC_IMX8M as build gate, not CONFIG_ARCH_MXC, to control
whether build this driver, also make it possible for compile test.
Default set it to y for ARCH_MXC && ARM64
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
During system suspend, the role switch may occur, eg, from gadget->host.
In this case, the vbus disconnect event is lost, we add this handling
in role switch routine in this commit.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
At current code, it doesn't maintain ci->gadget.dev's runtime PM
status well, eg, during the PM operation, the PM counter for
ci->gadget.dev doesn't be changed accordingly.
In this commit, we use ci_hdrc device instead of ci->gadget.dev
for runtime PM APIs at udc driver, in the way, we handle runtime
PM APIs using unify device structure between core and udc driver.
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Peter Chen <peter.chen@nxp.com>
The Atheros AR8035 PHY can be autodetected but can't use interrupt
support provided on this board. Define MDIO bus and the PHY node to make
it work properly.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Atheros AR8035 PHY can be autodetected but can't use interrupt
support provided on this board. Define MDIO bus and the PHY node to make
it work properly.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Set a sound name prefix for the HPA, as otherwise the sound controls
naming will clash with the controls of the DAC.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Currently we don't ensure that the LDB is clocked from the video PLL
and relied on the bootloader to do the correct setup. This isn't always
true, in which case we would run with a vastly different video clock
than the desired one. Fix this by assigning the proper parent to the
LDB.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
1. Replace boiler plate licenses texts with the SPDX license
identifiers in Toradex Vybrid-based SoM device trees.
2. As X11 is identical to the MIT License, but with an extra sentence
that prohibits using the copyright holders' names for advertising or
promotional purposes without written permission, use MIT license instead
of X11 ('s/X11/MIT/g').
3. Replace "Toradex AG" with "Toradex" in the Copyright notice.
4. Use GPL2.0+ instead of GPL2.0, as it's used now by default for all
new DTS files.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
1. Replace boiler plate licenses texts with the SPDX license
identifiers in Toradex i.MX7-based SoM device trees.
2. As X11 is identical to the MIT License, but with an extra sentence
that prohibits using the copyright holders' names for advertising or
promotional purposes without written permission, use MIT license instead
of X11 ('s/X11/MIT/g').
3. Replace "Toradex AG" with "Toradex" in the Copyright notice.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
1. Replace boiler plate licenses texts with the SPDX license
identifiers in Toradex iMX6-based SoM device trees.
2. As X11 is identical to the MIT License, but with an extra sentence
that prohibits using the copyright holders' names for advertising or
promotional purposes without written permission, use MIT license instead
of X11 ('s/X11/MIT/g').
3. Replace "Toradex AG" with "Toradex" in the Copyright notice.
4. Use GPL2.0+ instead of GPL2.0, as it's used now by default for all
new DTS files from Toradex.
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add IPU CSI ports and capture-subsystem device so the capture subsystem
part of the IPUv3EX can be used with the staging imx-media driver.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The device needs to be passed on to the clk_hw_register.
Fixes: 1f9aec9662 ("clk: imx: clk-gate2: Switch to clk_hw based API")
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables e1000 Ethernet device as it is used as a low-cost failover
Ethernet port on various QorIQ reference boards. Enabled as built-in
for booting from network without initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables various PHY device drivers and PHY MUX drivers used on QorIQ
reference boards supported in mainline kernel.
Enabled as built-in to boot from network without an initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables the RTC devices used on QorIQ reference boards supported in
mainline kernel.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enable the flash devices used on NXP/FSL QorIQ reference boards
supported in mainline kernel. Drivers are enabled as built-in for RFS
access without initramfs.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Enables the Mali display driver for the display port on NXP LS1028a SoC.
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
