This patch implements support for DSP D0i3 when the system
is in S0. The basic idea is to schedule a delayed work after
every successful IPC TX that checks if there are only
D0I3-compatible streams active and if so transition
the DSP to D0I3.
With the introduction of DSP D0I3 in S0, we need to
ensure that the DSP is in D0I0 before sending any new
IPCs. The exception for this would be the
compact IPCs that are used to set the DSP in
D0I3/D0I0 states.
Signed-off-by: Keyon Jie <yang.jie@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Amend the DSP state transition diagram in preparation
for introducing the feature to support opportunistic
DSP D0I3 state when the system is in S0.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function to check if only D0i3-compatible streams
are active.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The DSP device substates such as D0I0/D0I3
are platform-specific. Therefore, the d0_substate
field of struct snd_sof_dev is replaced
with the dsp_power_state field which represents the current
state of the DSP. This field holds both the device state
and the platform-specific substate values.
With the DSP device substates being platform-specific,
the DSP power state transitions need to be performed in
the platform-specific suspend/resume ops as well.
In order to achieve this, the ops signature has to be
modified to pass the target device state as an
argument. The target substate will be determined by
the platform-specific ops before performing the transition.
For example, in the case of the system suspending to S0IX,
the top-level SOF device suspend callback needs to
only determine if the DSP will be entering
D3 or remain in D0. The target substate in case the device
needs to remain in D0 (D0I0 or D0I3) will be determined
by the platform-specific suspend op.
With the addition of the extended set of power states for the DSP,
the set_power_state op for HDA platforms has to be extended
to handle only the appropriate state transitions. So, the
implementation for the Intel HDA platforms is also modified.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a new enum sof_dsp_power_states for all the possible
the DSP device states. The SOF driver currently handles
only the D0 and D3 states and support for other states
will be added later as needed.
Also, add a helper to determine the target DSP power state
based on the system suspend target.
The snd_sof_dsp_d0i3_on_suspend() function is renamed to
snd_sof_stream_suspend_ignored() to be more indicative
of what it does and it used to determine the target
DSP state during system suspend.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the system_suspend_target field to struct snd_sof_dev
to track the intended system suspend power target. This will
be used as one of the criteria for determining the
final DSP power state.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Unify the suspend/resume routines for both the D0I3/D3
DSP targets in sof_suspend()/sof_resume().
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Setting the prepared flag to false marks the streams for the
hw_params to be reset upon resuming. In the case of
the D0i3-compatible streams that ignored suspend to
keep the pipeline active in the DSP during suspend,
this should not be done.
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129220726.31792-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
1.
Provides a callback (i.e. mtk_hdmi_audio_hook_plugged_cb) to hdmi-codec.
When ASoC machine driver calls hdmi_codec_set_jack_detect(), the
callback will be invoked to save plugged_cb and codec_dev parameters.
+---------+ set_jack_ +------------+ plugged_cb +----------+
| machine | ----------> | hdmi-codec | ----------> | mtk-hdmi |
+---------+ detect() +------------+ codec_dev +----------+
2.
When there is any jack status changes, mtk-hdmi will call the
plugged_cb() to notify hdmi-codec. And then hdmi-codec will call
snd_soc_jack_report().
+----------+ plugged_cb +------------+
| mtk-hdmi | ----------> | hdmi-codec | -> snd_soc_jack_report()
+----------+ codec_dev +------------+
connector_status
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20200206102509.2.I230fd59de28e73934a91cb01424e25b9e84727f4@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
The assignment to ret is redundant as it is not used in the error
return path and hence can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20200210092423.327499-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sound/soc/codecs/wcd934x.c: In function wcd934x_codec_hphdelay_lutbypass:
sound/soc/codecs/wcd934x.c:3395:6: warning: variable hph_comp_ctrl7 set but not used [-Wunused-but-set-variable]
commit da3e83f8bb ("ASoC: wcd934x: add audio routings")
involved this unused variable.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20200210150421.34680-1-yuehaibing@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds driver for SPI controller found in Qualcomm Atheros
AR934x/QCA95xx SoCs.
This controller is a superset of the already supported qca,ar7100-spi.
Besides the bit-bang mode in spi-ath79.c, this new controller added
a new "shift register" mode, allowing faster spi operations.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Link: https://lore.kernel.org/r/20200210034152.49063-2-gch981213@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This driver doesn't call any DT functions like of_get_property(). Remove
the of.h include as it isn't used.
Cc: Girish Mahadevan <girishm@codeaurora.org>
Cc: Dilip Kota <dkota@codeaurora.org>
Cc: Alok Chauhan <alokc@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200204191206.97036-4-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Changes stm32 QSPI driver to defer its probe operation when a reset
controller device have not yet probed but is registered in the
system.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Link: https://lore.kernel.org/r/20200203135048.1299-2-patrice.chotard@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some lines are long here. Use a struct dev pointer to shorten lines and
simplify code. The clk_get() call can fail because of EPROBE_DEFER
problems too, so just remove the error print message because it isn't
useful.
Cc: Girish Mahadevan <girishm@codeaurora.org>
Cc: Dilip Kota <dkota@codeaurora.org>
Cc: Alok Chauhan <alokc@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200204191206.97036-3-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't need to force IRQF_TRIGGER_HIGH here as the DT or ACPI tables
should take care of this for us. Just use 0 instead so that we use the
flags from the firmware.
Cc: Girish Mahadevan <girishm@codeaurora.org>
Cc: Dilip Kota <dkota@codeaurora.org>
Cc: Alok Chauhan <alokc@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200204191206.97036-2-swboyd@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Adding regulator driver for the device mp5416.
The MP5416 PMIC device contains four DC-DC buck converters and
five regulators, accessed over I2C.
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Link: https://lore.kernel.org/r/20200204110419.25933-3-sravanhome@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add device tree binding information for mp5416 regulator driver.
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200204110419.25933-2-sravanhome@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The devm_request_threaded_irq() already returns 0 on success
and negative error code on failure. So return from this itself
can be used while preserving error log in case of failure.
Signed-off-by: Rishi Gupta <gupt21@gmail.com>
Link: https://lore.kernel.org/r/1580996996-28798-1-git-send-email-gupt21@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This commit fixes following errors & warnings in this driver
as reported by checkpatch.pl:
- WARNING: Prefer 'unsigned int' to bare use of 'unsigned'
- WARNING: line over 80 characters
- ERROR: space prohibited before that ',' (ctx:WxW)
- ERROR: code indent should use tabs where possible
- WARNING: Block comments use * on subsequent lines
Signed-off-by: Rishi Gupta <gupt21@gmail.com>
Link: https://lore.kernel.org/r/1580996917-28494-1-git-send-email-gupt21@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add vin_supply to the regulator description to support a nice
regulator tree.
Signed-off-by: Markus Reichl <m.reichl@fivetechno.de>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20200203110034.1448-1-m.reichl@fivetechno.de
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently SND_SOC_ALL_CODECS selects the config symbols for all codec
drivers. As "select" bypasses dependencies, lots of "select" statements
need explicit dependencies, which are hard to get right, and hard to
maintain[*].
Fix this by using "imply" instead, which is a weak version of "select",
and which obeys dependencies of target symbols.
Add dependencies to invisible symbols that are currently selected only
if their dependencies are fulfilled.
[*] See e.g. commit 13426feaf4 ("ASoC: wcd934x: Add missing
COMMON_CLK dependency to SND_SOC_ALL_CODECS").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20200207091351.18133-1-geert@linux-m68k.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Add SOF device and DT descriptors for i.MX8QM platform.
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200210095817.13226-4-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX8QM and i.MX8QXP are mostly identical platforms with minor hardware
differences. One of these differences affects the firmware boot process,
requiring the run operation to differ. All other ops are reused.
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200210095817.13226-3-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX8 and i.MX8X platforms are very similar and were treated the same.
Anyhow, we need to account for the differences somehow.
Current supported platform is i.MX8QXP which is from i.MX8X family.
Rename i.MX8 platform to i.MX8X to prepare for future i.MX8 platforms.
Signed-off-by: Paul Olaru <paul.olaru@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200210095817.13226-2-daniel.baluta@oss.nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Variable idx is being assigned with a value that is never idx, it is
assigned a new value a couple of statements later. The assignment is
redundant and can be removed.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200208221529.37105-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently function sst_platform_get_resources always returns zero and
error return codes set by the function are never returned. Fix this
by returning the error return code in variable ret rather than the
hard coded zero.
Addresses-Coverity: ("Unused value")
Fixes: f533a035e4 ("ASoC: Intel: mrfld - create separate module for pci part")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200208220720.36657-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not print an error trace when deferring probe for I2S driver.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-7-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not print an error trace when deferring probe for SPDIFRX driver.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-6-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Do not print an error trace when deferring probe for SAI driver.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-5-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return an error when the i2s driver fails to get a reset controller.
Also add an error trace, except on probe defer status.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-4-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return an error when the SPDIFRX driver fails to get a reset controller.
Also add an error trace, except on probe defer status.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-3-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return an error when the SAI driver fails to get a reset controller.
Also add an error trace, except on probe defer status.
Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Link: https://lore.kernel.org/r/20200203100814.22944-2-olivier.moysan@st.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The field "is_sdw" is used for distinguishing the driver whether is run
in soundwire mode or not. That will run the separated setting in runtime
to make sure the driver can be run with the same build between i2s mode
and soundwire mode.
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Link: https://lore.kernel.org/r/980b97e1ab9c4fab8bd345ec2158f1fd@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clang warns:
../sound/soc/codecs/wcd934x.c:1886:11: warning: address of array
'wcd->rx_chs' will always evaluate to 'true' [-Wpointer-bool-conversion]
if (wcd->rx_chs) {
~~ ~~~~~^~~~~~
../sound/soc/codecs/wcd934x.c:1894:11: warning: address of array
'wcd->tx_chs' will always evaluate to 'true' [-Wpointer-bool-conversion]
if (wcd->tx_chs) {
~~ ~~~~~^~~~~~
2 warnings generated.
Arrays that are in the middle of a struct are never NULL so they don't
need a check like this.
Fixes: a61f3b4f47 ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Link: https://github.com/ClangBuiltLinux/linux/issues/854
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Link: https://lore.kernel.org/r/20200204060143.23393-1-natechancellor@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for Cherrytrail boards, using the pcm512x audio codec
using the new sof_pcm512x machine driver.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129223603.2569-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Switch over Broxton platforms with the pcm512x codec from the legacy
bxt-pcm512x to the new sof_pcm512x machine driver.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Link: https://lore.kernel.org/r/20200129223603.2569-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add support for multiple platforms, e.g. Apollolake based, using the
pcm512x audio codec.
The SOF developers and CI rely on the Up^2 and Hifiberry DAC+ boards
based on this codec for tests.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200129223603.2569-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Jabra Evolve 65 headset appears as if supporting lower rates than
48kHz, but it actually doesn't work but with 48kHz for playback.
This patch applies a workaround to enforce the 48kHz like LINE6
devices already did. The workaround is put in a unified helper
function, set_fixed_rate(), to be called from both places now.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206149
Link: https://lore.kernel.org/r/20200211111419.5895-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
