EFI structures are not packed, they follow natural alignment.
The packed attribute doesn't have any effect on the structure layout due
to the types and order of the members, and we only ever get these
structures as output from the EFI firmware so alignment issues have not
come up.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: James Morse <james.morse@arm.com>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224151025.32482-2-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The EFI mixed mode entry code goes through the ordinary startup_32()
routine before jumping into the kernel's EFI boot code in 64-bit
mode. The 32-bit startup code must be entered with paging disabled,
but this is not documented as a requirement for the EFI handover
protocol, and so we should disable paging explicitly when entering
the kernel from 32-bit EFI firmware.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: https://lkml.kernel.org/r/20191224132909.102540-4-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
0d95981438 ("x86: efi/random: Invoke EFI_RNG_PROTOCOL to seed the UEFI RNG table")
causes the drivers/efi/libstub/random.c code to get used on x86 for the first time.
But this code was not written with EFI mixed mode in mind (running a 64
bit kernel on 32 bit EFI firmware), this causes the kernel to crash during
early boot when running in mixed mode.
The problem is that in mixed mode pointers are 64 bit, but when running on
a 32 bit firmware, EFI calls which return a pointer value by reference only
fill the lower 32 bits of the passed pointer, leaving the upper 32 bits
uninitialized which leads to crashes.
This commit fixes this by initializing pointers which are passed by
reference to EFI calls to NULL before passing them, so that the upper 32
bits are initialized to 0.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 0d95981438 ("x86: efi/random: Invoke EFI_RNG_PROTOCOL to seed the UEFI RNG table")
Link: https://lkml.kernel.org/r/20191224132909.102540-3-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
On x86, until PAT is initialized, WC translates into UC-. Since we
calculate and store pgprot_writecombine(PAGE_KERNEL) when earlycon is
initialized, this means we actually use UC- mappings instead of WC
mappings, which makes scrolling very slow.
Instead store a boolean flag to indicate whether we want to use
writeback or write-combine mappings, and recalculate the actual pgprot_t
we need on every mapping. Once PAT is initialized, we will start using
write-combine mappings, which speeds up the scrolling considerably.
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Fixes: 69c1f396f2 ("efi/x86: Convert x86 EFI earlyprintk into generic earlycon implementation")
Link: https://lkml.kernel.org/r/20191224132909.102540-2-ardb@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit:
285a54efe3 ("x86/alternatives: Sync bp_patching update for avoiding NULL pointer exception")
added an additional text_poke_sync() IPI to text_poke_bp_batch() to
handle the rare case where another CPU is still inside an INT3 handler
while we clear the global state.
Instead of spraying IPIs around, count the active INT3 handlers and
wait for them to go away before proceeding to clear/reuse the data.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
If the lockdep code is really running out of the stack_trace entries,
it is likely that buffer overrun can happen and the data immediately
after stack_trace[] will be corrupted.
If there is less than LOCK_TRACE_SIZE_IN_LONGS entries left before
the call to save_trace(), the max_entries computation will leave it
with a very large positive number because of its unsigned nature. The
subsequent call to stack_trace_save() will then corrupt the data after
stack_trace[]. Fix that by changing max_entries to a signed integer
and check for negative value before calling stack_trace_save().
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 12593b7467 ("locking/lockdep: Reduce space occupied by stack traces")
Link: https://lkml.kernel.org/r/20191220135128.14876-1-longman@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Capacity Awareness refers to the fact that on heterogeneous systems
(like Arm big.LITTLE), the capacity of the CPUs is not uniform, hence
when placing tasks we need to be aware of this difference of CPU
capacities.
In such scenarios we want to ensure that the selected CPU has enough
capacity to meet the requirement of the running task. Enough capacity
means here that capacity_orig_of(cpu) >= task.requirement.
The definition of task.requirement is dependent on the scheduling class.
For CFS, utilization is used to select a CPU that has >= capacity value
than the cfs_task.util.
capacity_orig_of(cpu) >= cfs_task.util
DL isn't capacity aware at the moment but can make use of the bandwidth
reservation to implement that in a similar manner CFS uses utilization.
The following patchset implements that:
https://lore.kernel.org/lkml/20190506044836.2914-1-luca.abeni@santannapisa.it/
capacity_orig_of(cpu)/SCHED_CAPACITY >= dl_deadline/dl_runtime
For RT we don't have a per task utilization signal and we lack any
information in general about what performance requirement the RT task
needs. But with the introduction of uclamp, RT tasks can now control
that by setting uclamp_min to guarantee a minimum performance point.
ATM the uclamp value are only used for frequency selection; but on
heterogeneous systems this is not enough and we need to ensure that the
capacity of the CPU is >= uclamp_min. Which is what implemented here.
capacity_orig_of(cpu) >= rt_task.uclamp_min
Note that by default uclamp.min is 1024, which means that RT tasks will
always be biased towards the big CPUs, which make for a better more
predictable behavior for the default case.
Must stress that the bias acts as a hint rather than a definite
placement strategy. For example, if all big cores are busy executing
other RT tasks we can't guarantee that a new RT task will be placed
there.
On non-heterogeneous systems the original behavior of RT should be
retained. Similarly if uclamp is not selected in the config.
[ mingo: Minor edits to comments. ]
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191009104611.15363-1-qais.yousef@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
task_fits_capacity() has just been made uclamp-aware, and
find_energy_efficient_cpu() needs to go through the same treatment.
Things are somewhat different here however - using the task max clamp isn't
sufficient. Consider the following setup:
The target runqueue, rq:
rq.cpu_capacity_orig = 512
rq.cfs.avg.util_avg = 200
rq.uclamp.max = 768 // the max p.uclamp.max of all enqueued p's is 768
The waking task, p (not yet enqueued on rq):
p.util_est = 600
p.uclamp.max = 100
Now, consider the following code which doesn't use the rq clamps:
util = uclamp_task_util(p);
// Does the task fit in the spare CPU capacity?
cpu = cpu_of(rq);
fits_capacity(util, cpu_capacity(cpu) - cpu_util(cpu))
This would lead to:
util = 100;
fits_capacity(100, 512 - 200)
fits_capacity() would return true. However, enqueuing p on that CPU *will*
cause it to become overutilized since rq clamp values are max-aggregated,
so we'd remain with
rq.uclamp.max = 768
which comes from the other tasks already enqueued on rq. Thus, we could
select a high enough frequency to reach beyond 0.8 * 512 utilization
(== overutilized) after enqueuing p on rq. What find_energy_efficient_cpu()
needs here is uclamp_rq_util_with() which lets us peek at the future
utilization landscape, including rq-wide uclamp values.
Make find_energy_efficient_cpu() use uclamp_rq_util_with() for its
fits_capacity() check. This is in line with what compute_energy() ends up
using for estimating utilization.
Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com>
Suggested-by: Quentin Perret <qperret@google.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211113851.24241-6-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
task_fits_capacity() drives CPU selection at wakeup time, and is also used
to detect misfit tasks. Right now it does so by comparing task_util_est()
with a CPU's capacity, but doesn't take into account uclamp restrictions.
There's a few interesting uses that can come out of doing this. For
instance, a low uclamp.max value could prevent certain tasks from being
flagged as misfit tasks, so they could merrily remain on low-capacity CPUs.
Similarly, a high uclamp.min value would steer tasks towards high capacity
CPUs at wakeup (and, should that fail, later steered via misfit balancing),
so such "boosted" tasks would favor CPUs of higher capacity.
Introduce uclamp_task_util() and make task_fits_capacity() use it.
Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211113851.24241-5-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The current helper returns (CPU) rq utilization with uclamp restrictions
taken into account. A uclamp task utilization helper would be quite
helpful, but this requires some renaming.
Prepare the code for the introduction of a uclamp_task_util() by renaming
the existing uclamp_util_with() to uclamp_rq_util_with().
Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211113851.24241-4-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Vincent pointed out recently that the canonical type for utilization
values is 'unsigned long'. Internally uclamp uses 'unsigned int' values for
cache optimization, but this doesn't have to be exported to its users.
Make the uclamp helpers that deal with utilization use and return unsigned
long values.
Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Quentin Perret <qperret@google.com>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211113851.24241-3-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The sole user of uclamp_util(), schedutil_cpu_util(), was made to use
uclamp_util_with() instead in commit:
af24bde8df ("sched/uclamp: Add uclamp support to energy_compute()")
From then on, uclamp_util() has remained unused. Being a simple wrapper
around uclamp_util_with(), we can get rid of it and win back a few lines.
Tested-By: Dietmar Eggemann <dietmar.eggemann@arm.com>
Suggested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211113851.24241-2-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
There are instances where we keep searching for an idle CPU despite
already having a sched-idle CPU (in find_idlest_group_cpu(),
select_idle_smt() and select_idle_cpu() and then there are places where
we don't necessarily do that and return a sched-idle CPU as soon as we
find one (in select_idle_sibling()). This looks a bit inconsistent and
it may be worth having the same policy everywhere.
On the other hand, choosing a sched-idle CPU over a idle one shall be
beneficial from performance and power point of view as well, as we don't
need to get the CPU online from a deep idle state which wastes quite a
lot of time and energy and delays the scheduling of the newly woken up
task.
This patch tries to simplify code around sched-idle CPU selection and
make it consistent throughout.
Testing is done with the help of rt-app on hikey board (ARM64 octa-core,
2 clusters, 0-3 and 4-7). The cpufreq governor was set to performance to
avoid any side affects from CPU frequency. Following are the tests
performed:
Test 1: 1-cfs-task:
A single SCHED_NORMAL task is pinned to CPU5 which runs for 2333 us
out of 7777 us (so gives time for the cluster to go in deep idle
state).
Test 2: 1-cfs-1-idle-task:
A single SCHED_NORMAL task is pinned on CPU5 and single SCHED_IDLE
task is pinned on CPU6 (to make sure cluster 1 doesn't go in deep idle
state).
Test 3: 1-cfs-8-idle-task:
A single SCHED_NORMAL task is pinned on CPU5 and eight SCHED_IDLE
tasks are created which run forever (not pinned anywhere, so they run
on all CPUs). Checked with kernelshark that as soon as NORMAL task
sleeps, the SCHED_IDLE task starts running on CPU5.
And here are the results on mean latency (in us), using the "st" tool.
$ st 1-cfs-task/rt-app-cfs_thread-0.log
N min max sum mean stddev
642 90 592 197180 307.134 109.906
$ st 1-cfs-1-idle-task/rt-app-cfs_thread-0.log
N min max sum mean stddev
642 67 311 113850 177.336 41.4251
$ st 1-cfs-8-idle-task/rt-app-cfs_thread-0.log
N min max sum mean stddev
643 29 173 41364 64.3297 13.2344
The mean latency when we need to:
- wakeup from deep idle state is 307 us.
- wakeup from shallow idle state is 177 us.
- preempt a SCHED_IDLE task is 64 us.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/b90cbcce608cef4e02a7bbfe178335f76d201bab.1573728344.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This commit left behind an unused variable:
5443a0be61 ("sched: Use fair:prio_changed() instead of ad-hoc implementation") left behind an unused variable.
kernel/sched/core.c: In function 'set_user_nice':
kernel/sched/core.c:4507:16: warning: variable 'delta' set but not used
int old_prio, delta;
^~~~~
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 5443a0be61 ("sched: Use fair:prio_changed() instead of ad-hoc implementation")
Link: https://lkml.kernel.org/r/20191219140314.1252-1-cai@lca.pw
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It has been reported by Google that rseq is not behaving properly
with respect to clone when CLONE_VM is used without CLONE_THREAD.
It keeps the prior thread's rseq TLS registered when the TLS of the
thread has moved, so the kernel can corrupt the TLS of the parent.
The approach of clearing the per task-struct rseq registration
on clone with CLONE_THREAD flag is incomplete. It does not cover
the use-case of clone with CLONE_VM set, but without CLONE_THREAD.
Here is the rationale for unregistering rseq on clone with CLONE_VM
flag set:
1) CLONE_THREAD requires CLONE_SIGHAND, which requires CLONE_VM to be
set. Therefore, just checking for CLONE_VM covers all CLONE_THREAD
uses. There is no point in checking for both CLONE_THREAD and
CLONE_VM,
2) There is the possibility of an unlikely scenario where CLONE_SETTLS
is used without CLONE_VM. In order to be an issue, it would require
that the rseq TLS is in a shared memory area.
I do not plan on adding CLONE_SETTLS to the set of clone flags which
unregister RSEQ, because it would require that we also unregister RSEQ
on set_thread_area(2) and arch_prctl(2) ARCH_SET_FS for completeness.
So rather than doing a partial solution, it appears better to let
user-space explicitly perform rseq unregistration across clone if
needed in scenarios where CLONE_VM is not set.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211161713.4490-3-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It is preferrable to reject unknown flags within rseq unregistration
rather than to ignore them. It is an oversight caused by the fact that
the check for unknown flags is after the rseq unregister flag check.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191211161713.4490-2-mathieu.desnoyers@efficios.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Julian Wiedmann says:
====================
s390/qeth: fixes 2019-12-23
please apply the following patch series for qeth to your net tree.
This brings two fixes for errors during device initialization, deals with
several issues in the vnicc control code, and adds a missing lock.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
I stumbled over an old OSA model that claims to support DIAG_ASSIST,
but then rejects the cmd to query its DIAG capabilities.
In the old code this was ok, as the returned raw error code was > 0.
Now that we translate the raw codes to errnos, the "rc < 0" causes us
to fail the initialization of the device.
The fix is trivial: don't bail out when the DIAG query fails. Such an
error is not critical, we can still use the device (with a slightly
reduced set of features).
Fixes: 742d4d4083 ("s390/qeth: convert remaining legacy cmd callbacks")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
During vnicc_init wanted_char should be compared to cur_char and not
to QETH_VNICC_DEFAULT. Without this patch there is no way to enforce
the default values as desired values.
Note, that it is expected, that a card comes online with default values.
This patch was tested with private card firmware.
Fixes: caa1f0b10d ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Symptom: After vnicc/rx_bcast has been manually set to 0,
bridge_* sysfs parameters can still be set or written.
Only occurs on HiperSockets, as OSA doesn't support changing rx_bcast.
Vnic characteristics and bridgeport settings are mutually exclusive.
rx_bcast defaults to 1, so manually setting it to 0 should disable
bridge_* parameters.
Instead it makes sense here to check the supported mask. If the card
does not support vnicc at all, bridge commands are always allowed.
Fixes: caa1f0b10d ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Symptom: Error message "Configuring the VNIC characteristics failed"
in dmesg whenever an OSA interface on z15 is set online.
The VNIC characteristics get re-programmed when setting a L2 device
online. This follows the selected 'wanted' characteristics - with the
exception that the INVISIBLE characteristic unconditionally gets
switched off.
For devices that don't support INVISIBLE (ie. OSA), the resulting
IO failure raises a noisy error message
("Configuring the VNIC characteristics failed").
For IQD, INVISIBLE is off by default anyways.
So don't unnecessarily special-case the INVISIBLE characteristic, and
thereby suppress the misleading error message on OSA devices.
Fixes: caa1f0b10d ("s390/qeth: add VNICC enable/disable support")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_l3_dev_hsuid_store() initially checks the card state, but doesn't
take the conf_mutex to ensure that the card stays in this state while
being reconfigured.
Rework the code to take this lock, and drop a redundant state check in a
helper function.
Fixes: b333293058 ("qeth: add support for af_iucv HiperSockets transport")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
qeth_l?_set_online() goes through a number of initialization steps, and
on any error uses qeth_l?_stop_card() to tear down the residual state.
The first initialization step is qeth_core_hardsetup_card(). When this
fails after having established a QDIO context on the device
(ie. somewhere after qeth_mpc_initialize()), qeth_l?_stop_card() doesn't
shut down this QDIO context again (since the card state hasn't
progressed from DOWN at this stage).
Even worse, we then call qdio_free() as final teardown step to free the
QDIO data structures - while some of them are still hooked into wider
QDIO infrastructure such as the IRQ list. This is inevitably followed by
use-after-frees and other nastyness.
Fix this by unconditionally calling qeth_qdio_clear_card() to shut down
the QDIO context, and also to halt/clear any pending activity on the
various IO channels.
Remove the naive attempt at handling the teardown in
qeth_mpc_initialize(), it clearly doesn't suffice and we're handling it
properly now in the wider teardown code.
Fixes: 4a71df5004 ("qeth: new qeth device driver")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Ido Schimmel says:
====================
Simplify IPv6 route offload API
Motivation
==========
This is the IPv6 counterpart of "Simplify IPv4 route offload API" [1].
The aim of this patch set is to simplify the IPv6 route offload API by
making the stack a bit smarter about the notifications it is generating.
This allows driver authors to focus on programming the underlying device
instead of having to duplicate the IPv6 route insertion logic in their
driver, which is error-prone.
Details
=======
Today, whenever an IPv6 route is added or deleted a notification is sent
in the FIB notification chain and it is up to offload drivers to decide
if the route should be programmed to the hardware or not. This is not an
easy task as in hardware routes are keyed by {prefix, prefix length,
table id}, whereas the kernel can store multiple such routes that only
differ in metric / nexthop info.
This series makes sure that only routes that are actually used in the
data path are notified to offload drivers. This greatly simplifies the
work these drivers need to do, as they are now only concerned with
programming the hardware and do not need to replicate the IPv6 route
insertion logic and store multiple identical routes.
The route that is notified is the first route in the IPv6 FIB node,
which represents a single prefix and length in a given table. In case
the route is deleted and there is another route with the same key, a
replace notification is emitted. Otherwise, a delete notification is
emitted.
Unlike IPv4, in IPv6 it is possible to append individual nexthops to an
existing multipath route. Therefore, in addition to the replace and
delete notifications present in IPv4, an append notification is also
used.
Testing
=======
To ensure there is no degradation in route insertion rates, I averaged
the insertion rate of 512k routes (/64 and /128) over 50 runs. Did not
observe any degradation.
Functional tests are available here [2]. They rely on route trap
indication, which is added in a subsequent patch set.
In addition, I have been running syzkaller for the past couple of weeks
with debug options enabled. Did not observe any problems.
Patch set overview
==================
Patches #1-#7 gradually introduce the new FIB notifications
Patch #8 converts mlxsw to use the new notifications
Patch #9 remove the old notifications
[1] https://patchwork.ozlabs.org/cover/1209738/
[2] https://github.com/idosch/linux/tree/fib-notifier
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Now that mlxsw is converted to use the new FIB notifications it is
possible to delete the old ones and use the new replace / append /
delete notifications.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With the new notifications mlxsw does not need to handle identical
routes itself, as this is taken care of by the core IPv6 code.
Instead, mlxsw only needs to take care of inserting and removing routes
from the device.
Convert mlxsw to use the new IPv6 route notifications and simplify the
code.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When an entire multipath route is deleted, only emit a notification if
it is the first route in the node. Emit a replace notification in case
the last sibling is followed by another route. Otherwise, emit a delete
notification.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the purpose of route offload, when a single route is deleted, it is
only of interest if it is the first route in the node or if it is
sibling to such a route.
In the first case, distinguish between several possibilities:
1. Route is the last route in the node. Emit a delete notification
2. Route is followed by a non-multipath route. Emit a replace
notification for the non-multipath route.
3. Route is followed by a multipath route. Emit a replace notification
for the multipath route.
In the second case, only emit a delete notification to ensure the route
is no longer used as a valid nexthop.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When a new listener is registered to the FIB notification chain it
receives a dump of all the available routes in the system. Instead, make
sure to only replay the IPv6 routes that are actually used in the data
path and are of any interest to the new listener.
This is done by iterating over all the routing tables in the given
namespace, but from each traversed node only the first route ('leaf') is
notified. Multipath routes are notified in a single notification instead
of one for each nexthop.
Add fib6_rt_dump_tmp() to do that. Later on in the patch set it will be
renamed to fib6_rt_dump() instead of the existing one.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a similar fashion to previous patches, only notify the new multipath
route if it is the first route in the node or if it was appended to such
route.
The type of the notification (replace vs. append) is determined based on
the number of routes added ('nhn') and the number of sibling routes. If
the two do not match, then an append notification should be sent.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the corresponding IPv4 patch, only notify the new route if it
is replacing the currently offloaded one. Meaning, the one pointed to by
'fn->leaf'.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fib6_add_rt2node() takes care of adding a single route ('struct
fib6_info') to a FIB node. The route in question should only be notified
in case it is added as the first route in the node (lowest metric) or if
it is added as a sibling route to the first route in the node.
The first criterion can be tested by checking if the route is pointed to
by 'fn->leaf'. The second criterion can be tested by checking the new
'notify_sibling_rt' variable that is set when the route is added as a
sibling to the first route in the node.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subsequent patches are going to simplify the IPv6 route offload API,
which will only use three events - replace, delete and append.
Introduce a temporary version of replace and delete in order to make the
conversion easier to review. Note that append does not need a temporary
version, as it is currently not used.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Hangbin Liu says:
====================
disable neigh update for tunnels during pmtu update
When we setup a pair of gretap, ping each other and create neighbour cache.
Then delete and recreate one side. We will never be able to ping6 to the new
created gretap.
The reason is when we ping6 remote via gretap, we will call like
gre_tap_xmit()
- ip_tunnel_xmit()
- tnl_update_pmtu()
- skb_dst_update_pmtu()
- ip6_rt_update_pmtu()
- __ip6_rt_update_pmtu()
- dst_confirm_neigh()
- ip6_confirm_neigh()
- __ipv6_confirm_neigh()
- n->confirmed = now
As the confirmed time updated, in neigh_timer_handler() the check for
NUD_DELAY confirm time will pass and the neigh state will back to
NUD_REACHABLE. So the old/wrong mac address will be used again.
If we do not update the confirmed time, the neigh state will go to
neigh->nud_state = NUD_PROBE; then go to NUD_FAILED and re-create the
neigh later, which is what IPv4 does.
We couldn't remove the ip6_confirm_neigh() directly as we still need it
for TCP flows. To fix it, we have to pass a bool parameter to
dst_ops.update_pmtu() and only disable neighbor update for tunnels.
v5: No code change, upate some commits description
v4: No code change, upate some commits description
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.
So disable the neigh confirm for vxlan and geneve pmtu update.
v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Fixes: a93bf0ff44 ("vxlan: update skb dst pmtu on tx path")
Fixes: 52a589d51f ("geneve: update skb dst pmtu on tx path")
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Tested-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.
v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.
Although vti and vti6 are immune to this problem because they are IFF_NOARP
interfaces, as Guillaume pointed. There is still no sense to confirm neighbour
here.
v5: Update commit description.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When do tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.
v5: No Change.
v4: Update commit description
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Fixes: 0dec879f63 ("net: use dst_confirm_neigh for UDP, RAW, ICMP, L2TP")
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Tested-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new function skb_dst_update_pmtu_no_confirm() for callers who need
update pmtu but should not do neighbor confirm.
v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end,
we should not call dst_confirm_neigh() as there is no two-way communication.
Although GTP only support ipv4 right now, and __ip_rt_update_pmtu() does not
call dst_confirm_neigh(), we still set it to false to keep consistency with
IPv6 code.
v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When we do ipv6 gre pmtu update, we will also do neigh confirm currently.
This will cause the neigh cache be refreshed and set to REACHABLE before
xmit.
But if the remote mac address changed, e.g. device is deleted and recreated,
we will not able to notice this and still use the old mac address as the neigh
cache is REACHABLE.
Fix this by disable neigh confirm when do pmtu update
v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Reported-by: Jianlin Shi <jishi@redhat.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The MTU update code is supposed to be invoked in response to real
networking events that update the PMTU. In IPv6 PMTU update function
__ip6_rt_update_pmtu() we called dst_confirm_neigh() to update neighbor
confirmed time.
But for tunnel code, it will call pmtu before xmit, like:
- tnl_update_pmtu()
- skb_dst_update_pmtu()
- ip6_rt_update_pmtu()
- __ip6_rt_update_pmtu()
- dst_confirm_neigh()
If the tunnel remote dst mac address changed and we still do the neigh
confirm, we will not be able to update neigh cache and ping6 remote
will failed.
So for this ip_tunnel_xmit() case, _EVEN_ if the MTU is changed, we
should not be invoking dst_confirm_neigh() as we have no evidence
of successful two-way communication at this point.
On the other hand it is also important to keep the neigh reachability fresh
for TCP flows, so we cannot remove this dst_confirm_neigh() call.
To fix the issue, we have to add a new bool parameter for dst_ops.update_pmtu
to choose whether we should do neigh update or not. I will add the parameter
in this patch and set all the callers to true to comply with the previous
way, and fix the tunnel code one by one on later patches.
v5: No change.
v4: No change.
v3: Do not remove dst_confirm_neigh, but add a new bool parameter in
dst_ops.update_pmtu to control whether we should do neighbor confirm.
Also split the big patch to small ones for each area.
v2: Remove dst_confirm_neigh in __ip6_rt_update_pmtu.
Suggested-by: David Miller <davem@davemloft.net>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify the code by moving the call to rtl_enable_eee() from the
individual PHY configs to rtl8169_init_phy().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to recent changes we don't need the call to rtl_rar_exgmac_set()
and longer at this place. It's called from rtl_rar_set() which is
called in rtl_init_mac_address() and rtl8169_resume().
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify and factor out this magic from rtl8168h_2_hw_phy_config()
and name it based on the vendor driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Martin Varghese says:
====================
New openvswitch MPLS actions for layer 2 tunnelling
The existing PUSH MPLS action inserts MPLS header between ethernet header
and the IP header. Though this behaviour is fine for L3 VPN where an IP
packet is encapsulated inside a MPLS tunnel, it does not suffice the L2
VPN (l2 tunnelling) requirements. In L2 VPN the MPLS header should
encapsulate the ethernet packet.
The new mpls action ADD_MPLS inserts MPLS header at the start of the
packet or at the start of the l3 header depending on the value of l3 tunnel
flag in the ADD_MPLS arguments.
POP_MPLS action is extended to support ethertype 0x6558
OVS userspace changes -
---------------------
Encap & Decap ovs actions are extended to support MPLS packet type. The encap & decap
adds and removes MPLS header at the start of packet as depicted below.
Actions - encap(mpls(ether_type=0x8847)),encap(ethernet)
Incoming packet -> | ETH | IP | Payload |
1 Actions - encap(mpls(ether_type=0x8847)) [Kernel action - add_mpls:0x8847]
Outgoing packet -> | MPLS | ETH | Payload|
2 Actions - encap(ethernet) [ Kernel action - push_eth ]
Outgoing packet -> | ETH | MPLS | ETH | Payload|
Decapsulation:
Incoming packet -> | ETH | MPLS | ETH | IP | Payload |
Actions - decap(),decap(packet_type(ns=0,type=0)
1 Actions - decap() [Kernel action - pop_eth)
Outgoing packet -> | MPLS | ETH | IP | Payload|
2 Actions - decap(packet_type(ns=0,type=0) [Kernel action - pop_mpls:0x6558]
Outgoing packet -> | ETH | IP | Payload
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The existing PUSH MPLS action inserts MPLS header between ethernet header
and the IP header. Though this behaviour is fine for L3 VPN where an IP
packet is encapsulated inside a MPLS tunnel, it does not suffice the L2
VPN (l2 tunnelling) requirements. In L2 VPN the MPLS header should
encapsulate the ethernet packet.
The new mpls action ADD_MPLS inserts MPLS header at the start of the
packet or at the start of the l3 header depending on the value of l3 tunnel
flag in the ADD_MPLS arguments.
POP_MPLS action is extended to support ethertype 0x6558.
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Rephrased comments section of skb_mpls_pop() to align it with
comments section of skb_mpls_push().
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
