The PMU registers are at least 0x18 bytes wide. Meson8b already uses a
size of 0x18. The structure of the PMU registers on Meson8 and Meson8b
is similar but not identical.
Meson8 and Meson8b have the following registers in common (starting at
AOBUS + 0xe0):
#define AO_RTI_PWR_A9_CNTL0 0xe0 (0x38 << 2)
#define AO_RTI_PWR_A9_CNTL1 0xe4 (0x39 << 2)
#define AO_RTI_GEN_PWR_SLEEP0 0xe8 (0x3a << 2)
#define AO_RTI_GEN_PWR_ISO0 0x4c (0x3b << 2)
Meson8b additionally has these three registers:
#define AO_RTI_GEN_PWR_ACK0 0xf0 (0x3c << 2)
#define AO_RTI_PWR_A9_MEM_PD0 0xf4 (0x3d << 2)
#define AO_RTI_PWR_A9_MEM_PD1 0xf8 (0x3e << 2)
Thus we can assume that the register size of the PMU IP blocks is
identical on both SoCs (and Meson8 just contains some reserved registers
in that area) because the CEC registers start right after the PMU
(AO_RTI_*) registers at AOBUS + 0x100 (0x40 << 2).
The upcoming power domain driver will need to read and write the
AO_RTI_GEN_PWR_SLEEP0 and AO_RTI_GEN_PWR_ISO0 registers, so the updated
size is needed for that driver to work.
Fixes: 4a5a27116b ("ARM: dts: meson8: add support for booting the secondary CPU cores")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Switch the GPIO buttons/switches to use interrupts instead of polling.
While at it, add the mic mute switch and the power button.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Translating a context struct to string can be quite slow, especially if
the context has a lot of category bits set. This can cause quite
noticeable performance impact in situations where the translation needs
to be done repeatedly. A common example is a UNIX datagram socket with
the SO_PASSSEC option enabled, which is used e.g. by systemd-journald
when receiving log messages via datagram socket. This scenario can be
reproduced with:
cat /dev/urandom | base64 | logger &
timeout 30s perf record -p $(pidof systemd-journald) -a -g
kill %1
perf report -g none --pretty raw | grep security_secid_to_secctx
Before the caching introduced by this patch, computing the context
string (security_secid_to_secctx() function) takes up ~65% of
systemd-journald's CPU time (assuming a context with 1024 categories
set and Fedora x86_64 release kernel configs). After this patch
(assuming near-perfect cache hit ratio) this overhead is reduced to just
~2%.
This patch addresses the issue by caching a certain number (compile-time
configurable) of recently used context strings to speed up repeated
translations of the same context, while using only a small amount of
memory.
The cache is integrated into the existing sidtab table by adding a field
to each entry, which when not NULL contains an RCU-protected pointer to
a cache entry containing the cached string. The cache entries are kept
in a linked list sorted according to how recently they were used. On a
cache miss when the cache is full, the least recently used entry is
removed to make space for the new entry.
The patch migrates security_sid_to_context_core() to use the cache (also
a few other functions where it was possible without too much fuss, but
these mostly use the translation for logging in case of error, which is
rare).
Link: https://bugzilla.redhat.com/show_bug.cgi?id=1733259
Cc: Michal Sekletar <msekleta@redhat.com>
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
Tested-by: Stephen Smalley <sds@tycho.nsa.gov>
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
[PM: lots of merge fixups due to collisions with other sidtab patches]
Signed-off-by: Paul Moore <paul@paul-moore.com>
This replaces the reverse table lookup and reverse cache with a
hashtable which improves cache-miss reverse-lookup times from
O(n) to O(1)* and maintains the same performance as a reverse
cache hit.
This reduces the time needed to add a new sidtab entry from ~500us
to 5us on a Pixel 3 when there are ~10,000 sidtab entries.
The implementation uses the kernel's generic hashtable API,
It uses the context's string represtation as the hash source,
and the kernels generic string hashing algorithm full_name_hash()
to reduce the string to a 32 bit value.
This change also maintains the improvement introduced in
commit ee1a84fdfe ("selinux: overhaul sidtab to fix bug and improve
performance") which removed the need to keep the current sidtab
locked during policy reload. It does however introduce periodic
locking of the target sidtab while converting the hashtable. Sidtab
entries are never modified or removed, so the context struct stored
in the sid_to_context tree can also be used for the context_to_sid
hashtable to reduce memory usage.
This bug was reported by:
- On the selinux bug tracker.
BUG: kernel softlockup due to too many SIDs/contexts #37https://github.com/SELinuxProject/selinux-kernel/issues/37
- Jovana Knezevic on Android's bugtracker.
Bug: 140252993
"During multi-user performance testing, we create and remove users
many times. selinux_android_restorecon_pkgdir goes from 1ms to over
20ms after about 200 user creations and removals. Accumulated over
~280 packages, that adds a significant time to user creation,
making perf benchmarks unreliable."
* Hashtable lookup is only O(1) when n < the number of buckets.
Signed-off-by: Jeff Vander Stoep <jeffv@google.com>
Reported-by: Stephen Smalley <sds@tycho.nsa.gov>
Reported-by: Jovana Knezevic <jovanak@google.com>
Reviewed-by: Stephen Smalley <sds@tycho.nsa.gov>
Tested-by: Stephen Smalley <sds@tycho.nsa.gov>
[PM: subj tweak, removed changelog from patch description]
Signed-off-by: Paul Moore <paul@paul-moore.com>
On some kernels, concurrent calls to the lscpu command result in severe
slowdowns. For example, on v4.16, a single lscpu invocation takes about
two milliseconds, four concurrent invocations more than two seconds,
and 16 concurrent invocations more than 20 seconds. Given that the only
goal is to learn the number of CPUs, invoking lscpu but once suffices.
This commit therefore invokes lscpu early in kvm.sh execution, setting
the initial value of the TORTURE_ALLOTED_CPUS environment variable.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On a large system, it can be convenient to tell rcutorture to run
several instances of the default scenarios. Currently, this requires
explicitly listing them, for example, "--configs '2*SRCU-N 2*SRCU-P...'".
Although this works, it is rather inconvenient.
This commit therefore allows "CFLIST" to be specified to indicate the
default list of scenarios called out in the relevant CFLIST file, for
example, for RCU, tools/testing/selftests/rcutorture/configs/rcu/CFLIST.
In addition, multipliers may be used to run multiple instances of all
the scenarios. For example, on a 256-CPU system, "--configs '3*CFLIST'"
would run three instances of each scenario concurrently with one CPU
left over. Thus "--configs '3*CFLIST TINY01'" would exactly consume all
256 CPUs, which makes rcutorture's jitter feature more effective.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit switches from static structure to dynamic allocation
for rcu_fwds as another step towards providing multiple call_rcu()
forward-progress kthreads.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit threads pointers to rcu_fwd structures through the remaining
functions using rcu_fwds directly, namely rcu_torture_fwd_prog_cbfree(),
rcutorture_oom_notify() and rcu_torture_fwd_prog_init().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In order to add multiple call_rcu() forward-progress kthreads, it will
be necessary to dynamically allocate and initialize. This commit
therefore moves the initialization from compile time to instead
immediately precede thread-creation time.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In order to add multiple kthreads, it will be necessary to allow
the various functions to operate on a pointer to their kthread's
rcu_fwd structure. This commit therefore starts the process of
adding the needed "struct rcu_fwd" parameters and arguments to the
various callback forward-progress functions.
Note that rcutorture_oom_notify() and rcu_torture_fwd_cb_hist() will
eventually need to iterate over all kthreads' rcu_fwd structures.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that RCU behaves reasonably well with the current single-kthread
call_rcu() forward-progress testing, it is time to add more kthreads.
This commit takes a first step towards that goal by wrapping what
will be the per-kthread data into a new rcu_fwd structure.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This commit adds the worst-case results from any call_rcu()
forward-progress tests to the rcutorture test-summary output.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcutorture scripting uses the mpstat command to determine how much
the system is being used, and adjusts make's -j argument accordingly.
However, mpstat isn't installed by default, so it would be good if the
scripting does something useful when mpstat isn't present.
This commit therefore makes the scripts assumes that if mpstat is not
present, they are free to use all the CPUs.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently, jitter.sh assumes that the underlying hypervisor will be
configured with all CPUs hotpluggable, with the possible exception
of CPU 0. However, there are installations where the hypervisor
prohibits offlining, which breaks jitter.sh. This commit therefore
lists the CPUs that cannot be offlined up front, and checks for the
case where no CPU can be offlined in the loop.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The dracut scripting does not work on all platforms, and there are no
known failures from the init binary based on the statically linked C
program. This commit therefore removes the dracut scripting so that the
statically linked C program is always used to create the init "script".
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In many environments, gawk provides systime(), but awk doesn't.
This commit therefore changes awk scripts using systime() to instead be
gawk scripts.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The config option `CONFIG_PREEMPT' is used for the preemption model
"Low-Latency Desktop". The config option `CONFIG_PREEMPTION' is enabled
when kernel preemption is enabled which is true for the preemption model
`CONFIG_PREEMPT' and `CONFIG_PREEMPT_RT'.
Use `CONFIG_PREEMPTION' if it applies to both preemption models and not
just to `CONFIG_PREEMPT'.
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: rcu@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Currently PREEMPT_RCU and TREE_RCU are mutually exclusive Kconfig
options. But PREEMPT_RCU actually specifies a kind of TREE_RCU,
namely a preemptible TREE_RCU. This commit therefore makes PREEMPT_RCU
be a modifer to the TREE_RCU Kconfig option. This has the benefit of
simplifying several of the #if expressions that formerly needed to
check both, but now need only check one or the other.
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Lai Jiangshan <jiangshanlai@gmail.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_preempt_check_blocked_tasks() function has a comment
that states that the rcu_node structure's ->lock must be held,
which might be informative, but which carries little weight if
not read. This commit therefore removes this comment in favor of
raw_lockdep_assert_held_rcu_node(), which will complain quite
visibly if the required lock is not held.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The rcu_gp_fqs_check_wake() function uses rcu_preempt_blocked_readers_cgp()
to read ->gp_tasks while other cpus might overwrite this field.
We need READ_ONCE()/WRITE_ONCE() pairs to avoid compiler
tricks and KCSAN splats like the following :
BUG: KCSAN: data-race in rcu_gp_fqs_check_wake / rcu_preempt_deferred_qs_irqrestore
write to 0xffffffff85a7f190 of 8 bytes by task 7317 on cpu 0:
rcu_preempt_deferred_qs_irqrestore+0x43d/0x580 kernel/rcu/tree_plugin.h:507
rcu_read_unlock_special+0xec/0x370 kernel/rcu/tree_plugin.h:659
__rcu_read_unlock+0xcf/0xe0 kernel/rcu/tree_plugin.h:394
rcu_read_unlock include/linux/rcupdate.h:645 [inline]
__ip_queue_xmit+0x3b0/0xa40 net/ipv4/ip_output.c:533
ip_queue_xmit+0x45/0x60 include/net/ip.h:236
__tcp_transmit_skb+0xdeb/0x1cd0 net/ipv4/tcp_output.c:1158
__tcp_send_ack+0x246/0x300 net/ipv4/tcp_output.c:3685
tcp_send_ack+0x34/0x40 net/ipv4/tcp_output.c:3691
tcp_cleanup_rbuf+0x130/0x360 net/ipv4/tcp.c:1575
tcp_recvmsg+0x633/0x1a30 net/ipv4/tcp.c:2179
inet_recvmsg+0xbb/0x250 net/ipv4/af_inet.c:838
sock_recvmsg_nosec net/socket.c:871 [inline]
sock_recvmsg net/socket.c:889 [inline]
sock_recvmsg+0x92/0xb0 net/socket.c:885
sock_read_iter+0x15f/0x1e0 net/socket.c:967
call_read_iter include/linux/fs.h:1864 [inline]
new_sync_read+0x389/0x4f0 fs/read_write.c:414
read to 0xffffffff85a7f190 of 8 bytes by task 10 on cpu 1:
rcu_gp_fqs_check_wake kernel/rcu/tree.c:1556 [inline]
rcu_gp_fqs_check_wake+0x93/0xd0 kernel/rcu/tree.c:1546
rcu_gp_fqs_loop+0x36c/0x580 kernel/rcu/tree.c:1611
rcu_gp_kthread+0x143/0x220 kernel/rcu/tree.c:1768
kthread+0x1d4/0x200 drivers/block/aoe/aoecmd.c:1253
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:352
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 10 Comm: rcu_preempt Not tainted 5.3.0+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
[ paulmck: Added another READ_ONCE() for RCU CPU stall warnings. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Commit 18cd8c93e6 ("rcu/nocb: Print gp/cb kthread hierarchy if
dump_tree") added print statements to rcu_organize_nocb_kthreads for
debugging, but incorrectly guarded them, causing the function to always
spew out its message.
This patch fixes it by guarding both pr_alert statements with dump_tree,
while also changing the second pr_alert to a pr_cont, to print the
hierarchy in a single line (assuming that's how it was supposed to
work).
Fixes: 18cd8c93e6 ("rcu/nocb: Print gp/cb kthread hierarchy if dump_tree")
Signed-off-by: Stefan Reiter <stefan@pimaker.at>
[ paulmck: Make single-nocbs-CPU GP kthreads look less erroneous. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
We would like to use hlist_unhashed() from timer_pending(),
which runs without protection of a lock.
Note that other callers might also want to use this variant.
Instead of forcing a READ_ONCE() for all hlist_unhashed()
callers, add a new helper with an explicit _lockless suffix
in the name to better document what is going on.
Also add various WRITE_ONCE() in __hlist_del(), hlist_add_head()
and hlist_add_before()/hlist_add_behind() to pair with
the READ_ONCE().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
[ paulmck: Also add WRITE_ONCE() to rculist.h. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Without this patch, Sphinx shows "variable arguments" as the description
of the cond argument, rather than the intended description, and prints
the following warnings:
./include/linux/rculist.h:374: warning: Excess function parameter 'cond' description in 'list_for_each_entry_rcu'
./include/linux/rculist.h:651: warning: Excess function parameter 'cond' description in 'hlist_for_each_entry_rcu'
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
An expedited grace period can be stalled by a nohz_full CPU looping
in kernel context. This possibility is currently handled by some
carefully crafted checks in rcu_read_unlock_special() that enlist help
from ksoftirqd when permitted by the scheduler. However, it is exactly
these checks that require the scheduler avoid holding any of its rq or
pi locks across rcu_read_unlock() without also having held them across
the entire RCU read-side critical section.
It would therefore be very nice if expedited grace periods could
handle nohz_full CPUs looping in kernel context without such checks.
This commit therefore adds code to the expedited grace period's wait
and cleanup code that forces the scheduler-clock interrupt on for CPUs
that fail to quickly supply a quiescent state. "Quickly" is currently
a hard-coded single-jiffy delay.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
After RCU flavor consolidation, synchronize_sched_expedited_wait() does
both RCU-preempt and RCU-sched, whichever happens to have been built into
the running kernel. This commit therefore changes this function's name
to synchronize_rcu_expedited_wait() to reflect its new generic nature.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The function-header comments in kernel/rcu/tree_exp.h have gotten a bit
out of date, so this commit updates a number of them.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Now that the RCU flavors have been consolidated, there is one common
function for checking to see if an expedited RCU grace period has
completed, namely sync_rcu_preempt_exp_done(). Because this function is
no longer specific to RCU-preempt, this commit removes the "_preempt" from
its name. This commit also changes sync_rcu_preempt_exp_done_unlocked()
to sync_rcu_exp_done_unlocked() for the same reason.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The current expedited RCU grace-period code expects that a task
requesting an expedited grace period cannot awaken until that grace
period has reached the wakeup phase. However, it is possible for a long
preemption to result in the waiting task never sleeping. For example,
consider the following sequence of events:
1. Task A starts an expedited grace period by invoking
synchronize_rcu_expedited(). It proceeds normally up to the
wait_event() near the end of that function, and is then preempted
(or interrupted or whatever).
2. The expedited grace period completes, and a kworker task starts
the awaken phase, having incremented the counter and acquired
the rcu_state structure's .exp_wake_mutex. This kworker task
is then preempted or interrupted or whatever.
3. Task A resumes and enters wait_event(), which notes that the
expedited grace period has completed, and thus doesn't sleep.
4. Task B starts an expedited grace period exactly as did Task A,
complete with the preemption (or whatever delay) just before
the call to wait_event().
5. The expedited grace period completes, and another kworker
task starts the awaken phase, having incremented the counter.
However, it blocks when attempting to acquire the rcu_state
structure's .exp_wake_mutex because step 2's kworker task has
not yet released it.
6. Steps 4 and 5 repeat, resulting in overflow of the rcu_node
structure's ->exp_wq[] array.
In theory, this is harmless. Tasks waiting on the various ->exp_wq[]
array will just be spuriously awakened, but they will just sleep again
on noting that the rcu_state structure's ->expedited_sequence value has
not advanced far enough.
In practice, this wastes CPU time and is an accident waiting to happen.
This commit therefore moves the rcu_exp_gp_seq_end() call that officially
ends the expedited grace period (along with associate tracing) until
after the ->exp_wake_mutex has been acquired. This prevents Task A from
awakening prematurely, thus preventing more than one expedited grace
period from being in flight during a previous expedited grace period's
wakeup phase.
Fixes: 3b5f668e71 ("rcu: Overlap wakeups with next expedited grace period")
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
[ paulmck: Added updated comment. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tasks waiting within exp_funnel_lock() for an expedited grace period to
elapse can be starved due to the following sequence of events:
1. Tasks A and B both attempt to start an expedited grace
period at about the same time. This grace period will have
completed when the lower four bits of the rcu_state structure's
->expedited_sequence field are 0b'0100', for example, when the
initial value of this counter is zero. Task A wins, and thus
does the actual work of starting the grace period, including
acquiring the rcu_state structure's .exp_mutex and sets the
counter to 0b'0001'.
2. Because task B lost the race to start the grace period, it
waits on ->expedited_sequence to reach 0b'0100' inside of
exp_funnel_lock(). This task therefore blocks on the rcu_node
structure's ->exp_wq[1] field, keeping in mind that the
end-of-grace-period value of ->expedited_sequence (0b'0100')
is shifted down two bits before indexing the ->exp_wq[] field.
3. Task C attempts to start another expedited grace period,
but blocks on ->exp_mutex, which is still held by Task A.
4. The aforementioned expedited grace period completes, so that
->expedited_sequence now has the value 0b'0100'. A kworker task
therefore acquires the rcu_state structure's ->exp_wake_mutex
and starts awakening any tasks waiting for this grace period.
5. One of the first tasks awakened happens to be Task A. Task A
therefore releases the rcu_state structure's ->exp_mutex,
which allows Task C to start the next expedited grace period,
which causes the lower four bits of the rcu_state structure's
->expedited_sequence field to become 0b'0101'.
6. Task C's expedited grace period completes, so that the lower four
bits of the rcu_state structure's ->expedited_sequence field now
become 0b'1000'.
7. The kworker task from step 4 above continues its wakeups.
Unfortunately, the wake_up_all() refetches the rcu_state
structure's .expedited_sequence field:
wake_up_all(&rnp->exp_wq[rcu_seq_ctr(rcu_state.expedited_sequence) & 0x3]);
This results in the wakeup being applied to the rcu_node
structure's ->exp_wq[2] field, which is unfortunate given that
Task B is instead waiting on ->exp_wq[1].
On a busy system, no harm is done (or at least no permanent harm is done).
Some later expedited grace period will redo the wakeup. But on a quiet
system, such as many embedded systems, it might be a good long time before
there was another expedited grace period. On such embedded systems,
this situation could therefore result in a system hang.
This issue manifested as DPM device timeout during suspend (which
usually qualifies as a quiet time) due to a SCSI device being stuck in
_synchronize_rcu_expedited(), with the following stack trace:
schedule()
synchronize_rcu_expedited()
synchronize_rcu()
scsi_device_quiesce()
scsi_bus_suspend()
dpm_run_callback()
__device_suspend()
This commit therefore prevents such delays, timeouts, and hangs by
making rcu_exp_wait_wake() use its "s" argument consistently instead of
refetching from rcu_state.expedited_sequence.
Fixes: 3b5f668e71 ("rcu: Overlap wakeups with next expedited grace period")
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The code in sync_rcu_exp_select_node_cpus() calculates the current
CPU's mask within its rcu_node structure's bitmasks, but this has
already been computed in the ->grpmask field of that CPU's rcu_data
structure. This commit therefore just uses this ->grpmask field.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
This fixes a data-race where `atomic_t dynticks` is copied by value. The
copy is performed non-atomically, resulting in a data-race if `dynticks`
is updated concurrently.
This data-race was found with KCSAN:
==================================================================
BUG: KCSAN: data-race in dyntick_save_progress_counter / rcu_irq_enter
write to 0xffff989dbdbe98e0 of 4 bytes by task 10 on cpu 3:
atomic_add_return include/asm-generic/atomic-instrumented.h:78 [inline]
rcu_dynticks_snap kernel/rcu/tree.c:310 [inline]
dyntick_save_progress_counter+0x43/0x1b0 kernel/rcu/tree.c:984
force_qs_rnp+0x183/0x200 kernel/rcu/tree.c:2286
rcu_gp_fqs kernel/rcu/tree.c:1601 [inline]
rcu_gp_fqs_loop+0x71/0x880 kernel/rcu/tree.c:1653
rcu_gp_kthread+0x22c/0x3b0 kernel/rcu/tree.c:1799
kthread+0x1b5/0x200 kernel/kthread.c:255
<snip>
read to 0xffff989dbdbe98e0 of 4 bytes by task 154 on cpu 7:
rcu_nmi_enter_common kernel/rcu/tree.c:828 [inline]
rcu_irq_enter+0xda/0x240 kernel/rcu/tree.c:870
irq_enter+0x5/0x50 kernel/softirq.c:347
<snip>
Reported by Kernel Concurrency Sanitizer on:
CPU: 7 PID: 154 Comm: kworker/7:1H Not tainted 5.3.0+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
Workqueue: kblockd blk_mq_run_work_fn
==================================================================
Signed-off-by: Marco Elver <elver@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: rcu@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The "mask_ofl_ipi" is used to track which CPUs get IPIed, however
in the IPI sending loop, "mask_ofl_ipi" along with another variable
"mask_ofl_test" might also get modified to record which CPUs' quiesent
states must be reported by the sync_rcu_exp_select_node_cpus() at
the end of sync_rcu_exp_select_node_cpus(). This overlap of roles
can be confusing, so this patch cleans things a little by using
"mask_ofl_ipi" solely for determining which CPUs must be IPIed and
"mask_ofl_test" for solely determining on behalf of which CPUs
sync_rcu_exp_select_node_cpus() must report a quiscent state.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Acked-by: Marco Elver <elver@google.com>
The rcu_node structure's ->expmask field is accessed locklessly when
starting a new expedited grace period and when reporting an expedited
RCU CPU stall warning. This commit therefore handles the former by
taking a snapshot of ->expmask while the lock is held and the latter
by applying READ_ONCE() to lockless reads and WRITE_ONCE() to the
corresponding updates.
Link: https://lore.kernel.org/lkml/CANpmjNNmSOagbTpffHr4=Yedckx9Rm2NuGqC9UqE+AOz5f1-ZQ@mail.gmail.com
Reported-by: syzbot+134336b86f728d6e55a0@syzkaller.appspotmail.com
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Marco Elver <elver@google.com>
Add __rcu annotation to RCU-protected global pointer auditd_conn.
auditd_conn is an RCU-protected global pointer,i.e., accessed
via RCU methods rcu_dereference() and rcu_assign_pointer(),
hence it must be annotated with __rcu for sparse to report
warnings/errors correctly.
Fix multiple instances of the sparse error:
error: incompatible types in comparison expression
(different address spaces)
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Amol Grover <frextrite@gmail.com>
[PM: tweak subject line]
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----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=BpUT
-----END PGP SIGNATURE-----
Merge tag 'for-5.5-rc1-kconfig-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs Kconfig fix from David Sterba:
"This adds the config dependency integrating the crypto code and btrfs
support for blake2b (added in this dev cycle, via different trees).
Without it the option had to be selected manually"
* tag 'for-5.5-rc1-kconfig-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add Kconfig dependency for BLAKE2B
There are also PPC64, ARM and ARM64 based SOCs with a QUICC Engine,
and the core QE code as well as net/wan/fsl_ucc_hdlc and
tty/serial/ucc_uart has now been modified to not rely on ppcisms.
So extend the architectures that can select QUICC_ENGINE, and add the
rather modest requirements of OF && HAS_IOMEM.
The core code as well as the ucc_uart driver has been tested on an
LS1021A (arm), and it has also been tested that the QE code still
works on an mpc8309 (ppc). Qiang Zhao has tested that the QE-HDLC code
that gets enabled with this works on ARM64.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
When allowing this driver to be built for ARM, the build fails (for
CONFIG_SMP=y) since ARM's asm/irq.h header is not self-contained:
In file included from drivers/soc/fsl/qe/ucc.c:18:0:
>> arch/arm/include/asm/irq.h:34:50: error: unknown type name 'cpumask_t'
extern void arch_trigger_cpumask_backtrace(const cpumask_t *mask,
But nothing in this file actually uses anything from asm/irq.h -
removing this #include generates identical object code, both on PPC32
and on ARM (the latter with a patch added to asm/irq.h to make the
build work in the first place).
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Currently, QUICC_ENGINE depends on PPC32, so this in itself does not
change anything. In order to allow removing the PPC32 dependency from
QUICC_ENGINE and avoid allmodconfig build failures, add this explicit
dependency.
Also, the QE Ethernet has never been integrated on any non-PowerPC SoC
and most likely will not be in the future.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Qiang Zhao points out that these offsets get written to 16-bit
registers, and there are some QE platforms with more than 64K
muram. So it is possible that qe_muram_alloc() gives us an allocation
that can't actually be used by the hardware, so detect and reject
that.
Reported-by: Qiang Zhao <qiang.zhao@nxp.com>
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
When releasing the allocated muram resource, we rely on reading back
the offsets from the riptr/tiptr registers. But those registers are
__be16 (and we indeed write them using iowrite16be), so we can't just
read them back with a normal C dereference.
This is not currently a real problem, since for now the driver is
PPC32-only. But it will soon be allowed to be used on arm and arm64 as
well.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
When building this on a 64-bit platform gcc rightly warns that the
error checking is broken (-ENOMEM stored in an u32 does not compare
greater than (unsigned long)-MAX_ERRNO). Instead, now that
qe_muram_alloc() returns s32, use that type to store the return value
and use standard kernel style "ret < 0".
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Show the laggy state.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
__ceph_is_any_caps is a duplicate helper.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The nr in ceph_reclaim_caps_nr() is very possibly larger than 1,
so we may miss it and the reclaim work couldn't triggered as expected.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Add some visibility of tasks that are waiting for caps to the "caps"
debugfs file. Display the tgid of the waiting task, inode number, and
the caps the task needs and wants.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Most of these values should never be negative, so convert them to
unsigned values. Add some sanity checking to the parsed values, and
clean up some unneeded casts.
Note that while caps_max should never be negative, this patch leaves
it signed, since this value ends up later being compared to a signed
counter. Just ensure that userland never passes in a negative value
for caps_max.
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When building this on a 64-bit platform gcc rightly warns that the
error checking is broken (-ENOMEM stored in an u32 does not compare
greater than (unsigned long)-MAX_ERRNO). Instead, change the
ucc_fast_[tr]x_virtual_fifo_base_offset members to s32 and use an
ordinary check-for-negative. Also, this avoids treating 0 as "this
cannot have been returned from qe_muram_alloc() so don't free it".
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
The sdma member of struct qe_immap is not at offset zero, so even if
qe_immr wasn't initialized yet (i.e. NULL), &qe_immr->sdma would not
be NULL.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
Now that qe_muram_alloc() returns s32, adapt qe_sdma_init() and avoid
another few IS_ERR_VALUE() uses.
Reviewed-by: Timur Tabi <timur@kernel.org>
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
