Heiner Kallweit says:
====================
r8169: improve PHY configuration
This series adds helpers to improve and simplify the PHY
configuration on various network chip versions.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
rtl8168c_4_hw_phy_config() duplicates rtl8168c_3_hw_phy_config(),
so we can remove the function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Certain integrated PHY's from RTL8168d support extended pages. On page
0x0007 the number of the extended page is written to register 0x1e,
then the registers on the extended page can be accessed. Add a helper
for this to improve readability and simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the phylib MDIO access functions in more places to simplify
the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Integrated PHY's from RTL8168d support an indirect access method for
PHY parameters. On page 0x0005 parameter number is written to register
0x05, then the parameter can be accessed via register 0x06.
Add a helper for this to improve readability and simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Integrated PHY's from RTL8168g support an indirect access method for
PHY parameters. On page 0x0a43 parameter number is written to register
0x13, then the parameter can be accessed via register 0x14.
Add a helper for this to improve readability and simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This removes '\n' from trace event class tcp_event_sk_skb to avoid
redundant new blank line and make output compact.
Fixes: af4325ecc2 ("tcp: expose sk_state in tcp_retransmit_skb tracepoint")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a race between driver code that does setup/cleanup of device
and devlink reload operation that in some drivers works with the same
code. Use after free could we easily obtained by running:
while true; do
echo "0000:00:10.0" >/sys/bus/pci/drivers/mlxsw_spectrum2/bind
devlink dev reload pci/0000:00:10.0 &
echo "0000:00:10.0" >/sys/bus/pci/drivers/mlxsw_spectrum2/unbind
done
Fix this by enabling reload only after setup of device is complete and
disabling it at the beginning of the cleanup process.
Reported-by: Ido Schimmel <idosch@mellanox.com>
Fixes: 2d8dc5bbf4 ("devlink: Add support for reload")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current upstream interface is an all-or-nothing, which is
sub-optimal for future changes, as it doesn't allow the upstream driver
to prepare for the SFP module becoming available, as it is at boot.
Switch to a find-sfp-bus, add-upstream, del-upstream, put-sfp-bus
interface structure instead, which allows the upstream driver to
prepare for a module being available as soon as add-upstream is called.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Disabling the display using MCDE currently results in a warning
together with a delay caused by some timeouts:
mcde a0350000.mcde: MCDE display is disabled
------------[ cut here ]------------
WARNING: CPU: 0 PID: 20 at drivers/gpu/drm/drm_atomic_helper.c:2258 drm_atomic_helper_commit_hw_done+0xe0/0xe4
Hardware name: ST-Ericsson Ux5x0 platform (Device Tree Support)
Workqueue: events drm_mode_rmfb_work_fn
[<c010f468>] (unwind_backtrace) from [<c010b54c>] (show_stack+0x10/0x14)
[<c010b54c>] (show_stack) from [<c079dd90>] (dump_stack+0x84/0x98)
[<c079dd90>] (dump_stack) from [<c011d1b0>] (__warn+0xb8/0xd4)
[<c011d1b0>] (__warn) from [<c011d230>] (warn_slowpath_fmt+0x64/0xc4)
[<c011d230>] (warn_slowpath_fmt) from [<c0413048>] (drm_atomic_helper_commit_hw_done+0xe0/0xe4)
[<c0413048>] (drm_atomic_helper_commit_hw_done) from [<c04159cc>] (drm_atomic_helper_commit_tail_rpm+0x44/0x6c)
[<c04159cc>] (drm_atomic_helper_commit_tail_rpm) from [<c0415f5c>] (commit_tail+0x50/0x10c)
[<c0415f5c>] (commit_tail) from [<c04160dc>] (drm_atomic_helper_commit+0xbc/0x128)
[<c04160dc>] (drm_atomic_helper_commit) from [<c0430790>] (drm_framebuffer_remove+0x390/0x428)
[<c0430790>] (drm_framebuffer_remove) from [<c0430860>] (drm_mode_rmfb_work_fn+0x38/0x48)
[<c0430860>] (drm_mode_rmfb_work_fn) from [<c01368a8>] (process_one_work+0x1f0/0x43c)
[<c01368a8>] (process_one_work) from [<c0136d48>] (worker_thread+0x254/0x55c)
[<c0136d48>] (worker_thread) from [<c013c014>] (kthread+0x124/0x150)
[<c013c014>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
Exception stack(0xeb14dfb0 to 0xeb14dff8)
dfa0: 00000000 00000000 00000000 00000000
dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
dfe0: 00000000 00000000 00000000 00000000 00000013 00000000
---[ end trace 314909bcd4c7d50c ]---
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CRTC:32:crtc-0] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [CONNECTOR:34:DSI-1] flip_done timed out
[drm:drm_atomic_helper_wait_for_dependencies] *ERROR* [PLANE:31:plane-0] flip_done timed out
The reason for this is that there is a vblank event pending, but we
never handle it after disabling the vblank interrupts.
Check if there is an vblank event pending when disabling the display,
and clear it by sending a fake vblank event in that case.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-8-stephan@gerhold.net
The DSI initialization sequence incorrectly assumes that the mode_set()
function of the DRM bridge is always called when (re-)enabling the display.
This is not necessarily the case.
Keeping the device idle in the framebuffer console for a while results
in the display being turned off using the disable() function. However,
as soon as any key is pressed only (pre_)enable() are called.
mode_set() is skipped because the mode has not been changed.
In this case, the DSI HS/LP clocks are never turned back on,
preventing the display from working.
Fix this by moving a part of the initialization sequence from
mode_set() to pre_enable(). Keep most of the video mode setup in
mode_set() since most of the registers are only dependent on the mode
that is set for the panel - there is no need to write them again each
time we re-enable the display.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-7-stephan@gerhold.net
Using a (single) DSI display with MCDE currently results in
two "connected" connectors:
Connector: DSI-1
id : 34
encoder id : 0
conn : connected
size : 0x0 (mm)
count_modes : 0
count_props : 5
props : 1 2 5 6 4
count_encoders : 1
encoders : 33
Connector: DSI-2
id : 35
encoder id : 33
conn : connected
size : 53x89 (mm)
count_modes : 1
count_props : 5
props : 1 2 5 6 4
count_encoders : 1
encoders : 33
Mode: "480x800" 480x800 60
Although both show up as connected, the first one does not have
any size and no available modes. This confuses userspace tools
(e.g. kmscube) who look for available modes for the first connector.
The reason for the duplicated connector is that mcde_dsi.c and the
DRM panel bridge helper both set up a DSI connector, with more or less
the same code. The connector set up by the DRM panel bridge is the
one that is correctly set up in the example above.
Therefore we can just remove the connector setup from mcde_dsi.c
and let the DRM core handle all the hard work.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-6-stephan@gerhold.net
The initialization order for DSI video mode is important - if we
enable the video stream generator (VSG) before the MCDE DSI formatter
starts sending pixel data, it will immediately run into an error and
disable itself again.
Avoid this problem by delaying the activation of the VSG
until the MCDE DSI formatter is properly set up and running
(i.e. when mcde_dsi_bridge_enable() is called).
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-5-stephan@gerhold.net
Triggering an error conditions in DSI video mode only results in
a very generic "some video mode error status" error message
at the moment.
Make this more clear by adding separate error messages for each bit.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-4-stephan@gerhold.net
The MCDE driver differentiates only between "te_sync"
(for hardware TE0 sync) and software sync
(i.e. manually triggered updates) at the moment.
However, none of these options work correctly for video mode panels.
Therefore, we need to make some changes to make them work correctly:
- Select hardware sync coming from the (DSI) formatter.
- Keep the FIFO permanently enabled (otherwise MCDE will stop
feeding data to the panel).
- Skip manual software sync (this is not necessary in video mode).
Automatically detect if the connected panel is using video mode
and enable the necessary changes in that case.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-3-stephan@gerhold.net
At the moment, vblank handling is only enabled together with
TE synchronization. However, the vblank IRQ is also working with
on displays without TE synchronization (e.g. DSI video mode panels).
It seems like the vblank IRQ is actually generated by the
MCDE hardware for the channel.
Therefore, the vblank handling should be working correctly in
all the cases and we can enable it unconditionally.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-2-stephan@gerhold.net
One conflict in the BPF samples Makefile, some fixes in 'net' whilst
we were converting over to Makefile.target rules in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
A check of the return value from get_cur_mix_raw() is missing at the
resolution test code in get_min_max_with_quirks(), which may leave the
variable untouched, leading to a random uninitialized value, as
detected by syzkaller fuzzer.
Add the missing return error check for fixing that.
Reported-and-tested-by: syzbot+abe1ab7afc62c6bb6377@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20191109181658.30368-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling. This patch
coverts to the common code.
(*) 1fe7f397cf: ALSA: memalloc: Add vmalloc buffer allocation
support
7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20191108164528.998-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change (commit 08422d2c55: "ALSA: memalloc: Allow NULL
device for SNDRV_DMA_TYPE_CONTINUOUS type") made the PCM preallocation
helper accepting NULL as the device pointer for the default usage.
Drop the snd_dma_continuous_data() usage that became superfluous from
the callers.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20191108164214.611-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The helper is no longer referred after the recent code refactoring.
Drop the export for saving some bits and future misuse.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling. This patch
coverts to the common code.
(*) 1fe7f397cf: ALSA: memalloc: Add vmalloc buffer allocation
support
7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-8-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling. This patch
coverts to the common code.
(*) 1fe7f397cf: ALSA: memalloc: Add vmalloc buffer allocation
support
7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Curtis Malainey <cujomalainey@chromium.org>
Link: https://lore.kernel.org/r/20191108094641.20086-7-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_sgbuf_ops_page is no longer needed to be set explicitly to PCM
page ops since the recent change in the PCM core (*). Leaving it NULL
should work as long as the preallocation has been done properly.
This patch drops the redundant lines.
(*) 7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pass the device pointer from the PCI pointer directly, instead of a
non-standard macro. The macro didn't give any better readability.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-5-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_pcm_sgbuf_ops_page is no longer needed to be set explicitly to PCM
page ops since the recent change in the PCM core (*). Leaving it NULL
should work as long as the preallocation has been done properly.
This patch drops the redundant lines.
(*) 7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change (*) in the ALSA memalloc core allows us to drop the
special vmalloc-specific allocation and page handling. This patch
coverts to the common code.
(*) 1fe7f397cf: ALSA: memalloc: Add vmalloc buffer allocation
support
7e8edae39f: ALSA: pcm: Handle special page mapping in the
default mmap handler
Since it requires the specific buffer type (SNDRV_DMA_TYPE_VMALLOC),
it's set in the pcm_new ops now.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent change (commit 08422d2c55: "ALSA: memalloc: Allow NULL
device for SNDRV_DMA_TYPE_CONTINOUS type") made the PCM preallocation
helper accepting NULL as the device pointer for the default usage.
Drop the snd_dma_continuous_data() usage that became superfluous from
the callers.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
For non-x86 architectures, SNDRV_DMA_TYPE_DEV_UC should be treated
equivalent with SNDRV_DMA_TYPE_DEV, where the default mmap handler
still checks only about SNDRV_DMA_TYPE_DEV. Make the check more
proper.
Note that all existing users of *_UC buffer types are x86-only, so
this doesn't fix any bug, but just for consistency.
Fixes: 42e748a0b3 ("ALSA: memalloc: Add non-cached buffer type")
Link: https://lore.kernel.org/r/20191108165626.5947-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
-----BEGIN PGP SIGNATURE-----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=CZxY
-----END PGP SIGNATURE-----
Merge tag 'for-5.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few regressions and fixes for stable.
Regressions:
- fix a race leading to metadata space leak after task received a
signal
- un-deprecate 2 ioctls, marked as deprecated by mistake
Fixes:
- fix limit check for number of devices during chunk allocation
- fix a race due to double evaluation of i_size_read inside max()
macro, can cause a crash
- remove wrong device id check in tree-checker"
* tag 'for-5.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: un-deprecate ioctls START_SYNC and WAIT_SYNC
btrfs: save i_size to avoid double evaluation of i_size_read in compress_file_range
Btrfs: fix race leading to metadata space leak after task received signal
btrfs: tree-checker: Fix wrong check on max devid
btrfs: Consider system chunk array size for new SYSTEM chunks
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAl3GikoACgkQ+iyteGJfRsoJrwCeKcV3lXSF4pnmHPK9yjP3bL5Y
leMAnjgQrVHljuShcBCzgNgb1I/Ln/BB
=ziku
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-5.4-rc7' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog fixes from Wim Van Sebroeck:
- cpwd: fix build regression
- pm8916_wdt: fix pretimeout registration flow
- meson: Fix the wrong value of left time
- imx_sc_wdt: Pretimeout should follow SCU firmware format
- bd70528: Add MODULE_ALIAS to allow module auto loading
* tag 'linux-watchdog-5.4-rc7' of git://www.linux-watchdog.org/linux-watchdog:
watchdog: bd70528: Add MODULE_ALIAS to allow module auto loading
watchdog: imx_sc_wdt: Pretimeout should follow SCU firmware format
watchdog: meson: Fix the wrong value of left time
watchdog: pm8916_wdt: fix pretimeout registration flow
watchdog: cpwd: fix build regression
Express available frequencies in mHZ in order to support even
rational ODRs. This patch is need to fix an Android CTS failure
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since st_lsm6dsx i2c master controller relies on accel device as trigger
and slave devices can run at different ODRs we must select an accel_odr >=
slave_odr. Report real accel ODR in st_lsm6dsx_check_odr() in order to
properly set sensor frequency in st_lsm6dsx_write_raw and avoid to
report unsupported frequency
Fixes: 6ffb55e500 ("iio: imu: st_lsm6dsx: introduce ST_LSM6DSX_ID_EXT sensor ids")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Introduce odr_len in st_lsm6dsx_odr_table_entry data structure in order
to explicitly define odr table size and support devices with different
odr table map
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add new optional dt property to tune analog clock prescaler.
Driver looks for optional "st,max-clk-rate-hz", then computes
best approximation below that rate, using ADC internal prescaler.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add optional dt property to tune maximum desired analog clock rate.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reduce local boilerplate.
Suggested by coccinelle
CHECK drivers/iio/dac/vf610_dac.c
drivers/iio/dac/vf610_dac.c:189:1-11: WARNING: Use devm_platform_ioremap_resource for info -> regs
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Sanchayan Maity <maitysanchayan@gmail.com>
Reduce boilerplate.
Suggested by coccinelle
CHECK drivers/iio/dac/lpc18xx_dac.c
drivers/iio/dac/lpc18xx_dac.c:121:1-10: WARNING: Use devm_platform_ioremap_resource for dac -> base
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
CC: Joachim Eastwood <manabian@gmail.com>
Reduces boilerplate.
Suggested by coccinelle
CHECK drivers/iio/adc/vf610_adc.c
drivers/iio/adc/vf610_adc.c:819:1-11: WARNING: Use devm_platform_ioremap_resource for info -> regs
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Fugang Duan <b38611@freescale.com>
Avoids local boilerplate doing the same thing.
Suggested by coccinelle
CHECK drivers/iio/adc/spear_adc.c
drivers/iio/adc/spear_adc.c:283:1-22: WARNING: Use devm_platform_ioremap_resource for st -> adc_base_spear6xx
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Avoids some local boilerplate.
Suggested by coccinelle.
CHECK drivers/iio/adc/rcar-gyroadc.c
drivers/iio/adc/rcar-gyroadc.c:495:1-11: WARNING: Use devm_platform_ioremap_resource for priv -> regs
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
Reduces local boilerplate code.
Suggested by coccinelle via coccicheck.
CHECK drivers/iio/adc/npcm_adc.c
drivers/iio/adc/npcm_adc.c:200:1-11: WARNING: Use devm_platform_ioremap_resource for info -> regs
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Tomer Maimon <tmaimon77@gmail.com>
Avoid local boilerplate.
Identified by coccinelle
CHECK drivers/iio/adc/lpc18xx_adc.c
drivers/iio/adc/lpc18xx_adc.c:137:1-10: WARNING: Use devm_platform_ioremap_resource for adc -> base
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Joachim Eastwood <manabian@gmail.com>
Replaces local boilerplate. Identified by coccinelle.
CHECK drivers/iio/adc/ingenic-adc.c
drivers/iio/adc/ingenic-adc.c:449:1-10: WARNING: Use devm_platform_ioremap_resource for adc -> base
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Artur Rojek <contact@artur-rojek.eu>
This round we have bunch of core and Intel driver updates spearheaded
by Pierre
Details
- Update unique id checks in core and ACPI helpers
- Improvements to to Intel driver and cadence lib
-----BEGIN PGP SIGNATURE-----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=pxir
-----END PGP SIGNATURE-----
Merge tag 'soundwire-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for v5.5-rc1
This round we have bunch of core and Intel driver updates spearheaded
by Pierre
Details
- Update unique id checks in core and ACPI helpers
- Improvements to to Intel driver and cadence lib
* tag 'soundwire-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: ignore uniqueID when irrelevant
soundwire: slave: add helper to extract slave ID
soundwire: remove bitfield for unique_id, use u8
soundwire: intel: fix PDI/stream mapping for Bulk
soundwire: cadence_master: make clock stop exit configurable on init
soundwire: intel/cadence: add flag for interrupt enable
soundwire: intel: add helper for initialization
soundwire: cadence_master: add hw_reset capability in debugfs
soundwire: intel/cadence: fix startup sequence
soundwire: intel: use correct header for io calls
soundwire: cadence_master: improve PDI allocation
soundwire: intel: don't filter out PDI0/1
soundwire: cadence/intel: simplify PDI/port mapping
soundwire: intel: remove playback/capture stream_name
soundwire: remove DAI_ID_RANGE definitions
soundwire: intel: remove X86 dependency
soundwire: intel: add missing headers for cross-compilation
Reduces local boilerplate.
Found by coccinelle:
drivers/iio/adc/cc10001_adc.c:344:1-18: WARNING: Use devm_platform_ioremap_resource for adc_dev -> reg_base
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Cc: Naidu Tellapati <naidu.tellapati@imgtec.com>
Reduces boilerplate. Identified by coccinelle
CHECK drivers/iio/adc/mt6577_auxadc.c
drivers/iio/adc/mt6577_auxadc.c:257:1-18: WARNING: Use devm_platform_ioremap_resource for adc_dev -> reg_base
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Zhiyong Tao <zhiyong.tao@mediatek.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Reduces boilerplate.
Identified by: Coccinelle / coccicheck
CHECK drivers/iio/adc/aspeed_adc.c
drivers/iio/adc/aspeed_adc.c:189:1-11: WARNING: Use devm_platform_ioremap_resource for data -> base
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Rick Altherr <raltherr@google.com>
Reviewed-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
