Commit graph

982,081 commits

Author SHA1 Message Date
Aneesh Kumar K.V
77e080e768 mm/memunmap: don't access uninitialized memmap in memunmap_pages()
Patch series "mm/memory_hotplug: Shrink zones before removing memory",
v6.

This series fixes the access of uninitialized memmaps when shrinking
zones/nodes and when removing memory.  Also, it contains all fixes for
crashes that can be triggered when removing certain namespace using
memunmap_pages() - ZONE_DEVICE, reported by Aneesh.

We stop trying to shrink ZONE_DEVICE, as it's buggy, fixing it would be
more involved (we don't have SECTION_IS_ONLINE as an indicator), and
shrinking is only of limited use (set_zone_contiguous() cannot detect
the ZONE_DEVICE as contiguous).

We continue shrinking !ZONE_DEVICE zones, however, I reduced the amount
of code to a minimum.  Shrinking is especially necessary to keep
zone->contiguous set where possible, especially, on memory unplug of
DIMMs at zone boundaries.

--------------------------------------------------------------------------

Zones are now properly shrunk when offlining memory blocks or when
onlining failed.  This allows to properly shrink zones on memory unplug
even if the separate memory blocks of a DIMM were onlined to different
zones or re-onlined to a different zone after offlining.

Example:

  :/# cat /proc/zoneinfo
  Node 1, zone  Movable
          spanned  0
          present  0
          managed  0
  :/# echo "online_movable" > /sys/devices/system/memory/memory41/state
  :/# echo "online_movable" > /sys/devices/system/memory/memory43/state
  :/# cat /proc/zoneinfo
  Node 1, zone  Movable
          spanned  98304
          present  65536
          managed  65536
  :/# echo 0 > /sys/devices/system/memory/memory43/online
  :/# cat /proc/zoneinfo
  Node 1, zone  Movable
          spanned  32768
          present  32768
          managed  32768
  :/# echo 0 > /sys/devices/system/memory/memory41/online
  :/# cat /proc/zoneinfo
  Node 1, zone  Movable
          spanned  0
          present  0
          managed  0

This patch (of 10):

With an altmap, the memmap falling into the reserved altmap space are not
initialized and, therefore, contain a garbage NID and a garbage zone.
Make sure to read the NID/zone from a memmap that was initialized.

This fixes a kernel crash that is observed when destroying a namespace:

  kernel BUG at include/linux/mm.h:1107!
  cpu 0x1: Vector: 700 (Program Check) at [c000000274087890]
      pc: c0000000004b9728: memunmap_pages+0x238/0x340
      lr: c0000000004b9724: memunmap_pages+0x234/0x340
  ...
      pid   = 3669, comm = ndctl
  kernel BUG at include/linux/mm.h:1107!
    devm_action_release+0x30/0x50
    release_nodes+0x268/0x2d0
    device_release_driver_internal+0x174/0x240
    unbind_store+0x13c/0x190
    drv_attr_store+0x44/0x60
    sysfs_kf_write+0x70/0xa0
    kernfs_fop_write+0x1ac/0x290
    __vfs_write+0x3c/0x70
    vfs_write+0xe4/0x200
    ksys_write+0x7c/0x140
    system_call+0x5c/0x68

The "page_zone(pfn_to_page(pfn)" was introduced by 69324b8f48 ("mm,
devm_memremap_pages: add MEMORY_DEVICE_PRIVATE support"), however, I
think we will never have driver reserved memory with
MEMORY_DEVICE_PRIVATE (no altmap AFAIKS).

[david@redhat.com: minimze code changes, rephrase description]
Link: http://lkml.kernel.org/r/20191006085646.5768-2-david@redhat.com
Fixes: 2c2a5af6fe ("mm, memory_hotplug: add nid parameter to arch_remove_memory")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Damian Tometzki <damian.tometzki@gmail.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jun Yao <yaojun8558363@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Rich Felker <dalias@libc.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>	[5.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 06:32:32 -04:00
David Hildenbrand
00d6c019b5 mm/memory_hotplug: don't access uninitialized memmaps in shrink_pgdat_span()
We might use the nid of memmaps that were never initialized.  For
example, if the memmap was poisoned, we will crash the kernel in
pfn_to_nid() right now.  Let's use the calculated boundaries of the
separate zones instead.  This now also avoids having to iterate over a
whole bunch of subsections again, after shrinking one zone.

Before commit d0dc12e86b ("mm/memory_hotplug: optimize memory
hotplug"), the memmap was initialized to 0 and the node was set to the
right value.  After that commit, the node might be garbage.

We'll have to fix shrink_zone_span() next.

Link: http://lkml.kernel.org/r/20191006085646.5768-4-david@redhat.com
Fixes: f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded memory to zones until online")	[d0dc12e86b]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Wei Yang <richardw.yang@linux.intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Cc: Damian Tometzki <damian.tometzki@gmail.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Halil Pasic <pasic@linux.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jun Yao <yaojun8558363@gmail.com>
Cc: Logan Gunthorpe <logang@deltatee.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Pankaj Gupta <pagupta@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Pavel Tatashin <pavel.tatashin@microsoft.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Rich Felker <dalias@libc.org>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Steve Capper <steve.capper@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Yu Zhao <yuzhao@google.com>
Cc: <stable@vger.kernel.org>	[4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 06:32:31 -04:00
Qian Cai
a26ee565b6 mm/page_owner: don't access uninitialized memmaps when reading /proc/pagetypeinfo
Uninitialized memmaps contain garbage and in the worst case trigger
kernel BUGs, especially with CONFIG_PAGE_POISONING.  They should not get
touched.

For example, when not onlining a memory block that is spanned by a zone
and reading /proc/pagetypeinfo with CONFIG_DEBUG_VM_PGFLAGS and
CONFIG_PAGE_POISONING, we can trigger a kernel BUG:

  :/# echo 1 > /sys/devices/system/memory/memory40/online
  :/# echo 1 > /sys/devices/system/memory/memory42/online
  :/# cat /proc/pagetypeinfo > test.file
   page:fffff2c585200000 is uninitialized and poisoned
   raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
   raw: ffffffffffffffff ffffffffffffffff ffffffffffffffff ffffffffffffffff
   page dumped because: VM_BUG_ON_PAGE(PagePoisoned(p))
   There is not page extension available.
   ------------[ cut here ]------------
   kernel BUG at include/linux/mm.h:1107!
   invalid opcode: 0000 [#1] SMP NOPTI

Please note that this change does not affect ZONE_DEVICE, because
pagetypeinfo_showmixedcount_print() is called from
mm/vmstat.c:pagetypeinfo_showmixedcount() only for populated zones, and
ZONE_DEVICE is never populated (zone->present_pages always 0).

[david@redhat.com: move check to outer loop, add comment, rephrase description]
Link: http://lkml.kernel.org/r/20191011140638.8160-1-david@redhat.com
Fixes: f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visible after d0dc12e86b
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: Miles Chen <miles.chen@mediatek.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Qian Cai <cai@lca.pw>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org>	[4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 06:32:31 -04:00
Joel Colledge
ca210ba32e scripts/gdb: fix lx-dmesg when CONFIG_PRINTK_CALLER is set
When CONFIG_PRINTK_CALLER is set, struct printk_log contains an
additional member caller_id.  This affects the offset of the log text.
Account for this by using the type information from gdb to determine all
the offsets instead of using hardcoded values.

This fixes following error:

  (gdb) lx-dmesg
  Python Exception <class 'ValueError'> embedded null character:
  Error occurred in Python command: embedded null character

The read_u* utility functions now take an offset argument to make them
easier to use.

Link: http://lkml.kernel.org/r/20191011142500.2339-1-joel.colledge@linbit.com
Signed-off-by: Joel Colledge <joel.colledge@linbit.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 06:32:31 -04:00
David Hildenbrand
96c804a6ae mm/memory-failure.c: don't access uninitialized memmaps in memory_failure()
We should check for pfn_to_online_page() to not access uninitialized
memmaps.  Reshuffle the code so we don't have to duplicate the error
message.

Link: http://lkml.kernel.org/r/20191009142435.3975-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Fixes: f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded memory to zones until online")	[visible after d0dc12e86b]
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>	[4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 06:32:31 -04:00
David Hildenbrand
aad5f69bc1 fs/proc/page.c: don't access uninitialized memmaps in fs/proc/page.c
There are three places where we access uninitialized memmaps, namely:
- /proc/kpagecount
- /proc/kpageflags
- /proc/kpagecgroup

We have initialized memmaps either when the section is online or when the
page was initialized to the ZONE_DEVICE.  Uninitialized memmaps contain
garbage and in the worst case trigger kernel BUGs, especially with
CONFIG_PAGE_POISONING.

For example, not onlining a DIMM during boot and calling /proc/kpagecount
with CONFIG_PAGE_POISONING:

  :/# cat /proc/kpagecount > tmp.test
  BUG: unable to handle page fault for address: fffffffffffffffe
  #PF: supervisor read access in kernel mode
  #PF: error_code(0x0000) - not-present page
  PGD 114616067 P4D 114616067 PUD 114618067 PMD 0
  Oops: 0000 [#1] SMP NOPTI
  CPU: 0 PID: 469 Comm: cat Not tainted 5.4.0-rc1-next-20191004+ #11
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.4
  RIP: 0010:kpagecount_read+0xce/0x1e0
  Code: e8 09 83 e0 3f 48 0f a3 02 73 2d 4c 89 e7 48 c1 e7 06 48 03 3d ab 51 01 01 74 1d 48 8b 57 08 480
  RSP: 0018:ffffa14e409b7e78 EFLAGS: 00010202
  RAX: fffffffffffffffe RBX: 0000000000020000 RCX: 0000000000000000
  RDX: 0000000000000001 RSI: 00007f76b5595000 RDI: fffff35645000000
  RBP: 00007f76b5595000 R08: 0000000000000001 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000140000
  R13: 0000000000020000 R14: 00007f76b5595000 R15: ffffa14e409b7f08
  FS:  00007f76b577d580(0000) GS:ffff8f41bd400000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: fffffffffffffffe CR3: 0000000078960000 CR4: 00000000000006f0
  Call Trace:
   proc_reg_read+0x3c/0x60
   vfs_read+0xc5/0x180
   ksys_read+0x68/0xe0
   do_syscall_64+0x5c/0xa0
   entry_SYSCALL_64_after_hwframe+0x49/0xbe

For now, let's drop support for ZONE_DEVICE from the three pseudo files
in order to fix this.  To distinguish offline memory (with garbage
memmap) from ZONE_DEVICE memory with properly initialized memmaps, we
would have to check get_dev_pagemap() and pfn_zone_device_reserved()
right now.  The usage of both (especially, special casing devmem) is
frowned upon and needs to be reworked.

The fundamental issue we have is:

	if (pfn_to_online_page(pfn)) {
		/* memmap initialized */
	} else if (pfn_valid(pfn)) {
		/*
		 * ???
		 * a) offline memory. memmap garbage.
		 * b) devmem: memmap initialized to ZONE_DEVICE.
		 * c) devmem: reserved for driver. memmap garbage.
		 * (d) devmem: memmap currently initializing - garbage)
		 */
	}

We'll leave the pfn_zone_device_reserved() check in stable_page_flags()
in place as that function is also used from memory failure.  We now no
longer dump information about pages that are not in use anymore -
offline.

Link: http://lkml.kernel.org/r/20191009142435.3975-2-david@redhat.com
Fixes: f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded memory to zones until online")	[visible after d0dc12e86b]
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: Qian Cai <cai@lca.pw>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Toshiki Fukasawa <t-fukasawa@vx.jp.nec.com>
Cc: Pankaj gupta <pagupta@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Anthony Yznaga <anthony.yznaga@oracle.com>
Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com>
Cc: <stable@vger.kernel.org>	[4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 06:32:31 -04:00
David Hildenbrand
641fe2e938 drivers/base/memory.c: don't access uninitialized memmaps in soft_offline_page_store()
Uninitialized memmaps contain garbage and in the worst case trigger kernel
BUGs, especially with CONFIG_PAGE_POISONING.  They should not get touched.

Right now, when trying to soft-offline a PFN that resides on a memory
block that was never onlined, one gets a misleading error with
CONFIG_PAGE_POISONING:

  :/# echo 5637144576 > /sys/devices/system/memory/soft_offline_page
  [   23.097167] soft offline: 0x150000 page already poisoned

But the actual result depends on the garbage in the memmap.

soft_offline_page() can only work with online pages, it returns -EIO in
case of ZONE_DEVICE.  Make sure to only forward pages that are online
(iow, managed by the buddy) and, therefore, have an initialized memmap.

Add a check against pfn_to_online_page() and similarly return -EIO.

Link: http://lkml.kernel.org/r/20191010141200.8985-1-david@redhat.com
Fixes: f1dd2cd13c ("mm, memory_hotplug: do not associate hotadded memory to zones until online")	[visible after d0dc12e86b]
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: <stable@vger.kernel.org>	[4.13+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-19 06:32:31 -04:00
Nathan Chancellor
fae7548f25 Bluetooth: btusb: Remove return statement in btintel_reset_to_bootloader
When building with Clang and CONFIG_BT_INTEL unset, the following error
occurs:

In file included from drivers/bluetooth/hci_ldisc.c:34:
drivers/bluetooth/btintel.h:188:2: error: void function
'btintel_reset_to_bootloader' should not return a value [-Wreturn-type]
        return -EOPNOTSUPP;
        ^      ~~~~~~~~~~~
1 error generated.

Remove the unneeded return statement to fix this.

Fixes: b9a2562f49 ("Bluetooth: btusb: Trigger Intel FW download error recovery")
Link: https://github.com/ClangBuiltLinux/linux/issues/743
Reported-by: <ci_notify@linaro.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2019-10-19 09:56:20 +02:00
Takashi Sakamoto
acfedcbe1c ALSA: firewire-lib: postpone to start IR context
Some devices have a quirk to postpone transmission of isoc packet for
several dozen or hundred isoc cycles since configured to transmit.
Furthermore, some devices have a quirk to transmit isoc packet with
discontinued data of its header.

In 1394 OHCI specification, software allows to start isoc context with
certain isoc cycle. Linux firewire subsystem has kernel API to use it
as well.

This commit uses the functionality of 1394 OHCI controller to handle
the quirks. At present, this feature is convenient to ALSA bebob and
fireface driver. As a result, some devices can be safely handled, as
long as I know:
 - MAudio FireWire solo
 - MAudio ProFire Lightbridge
 - MAudio FireWire 410
 - Roland FA-66

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191018061911.24909-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-19 09:18:27 +02:00
Takashi Sakamoto
60dd49298e ALSA: firewire-lib: handle several AMDTP streams in callback handler of IRQ target
This commit changes AMDTP domain to run on an IT context of 1394 OHCI as
IRQ target. No hardware interrupt is scheduled for the other isoc
contexts. All of the isoc context are processed in a callback for an isoc
context of IRQ target.

The IRQ target is automatically selected from a list of AMDTP streams,
thus users of AMDTP domain should add an AMDTP stream for IT context
at least.

The reason to select IT context as IRQ target is that the IT context
runs on local 1394 OHCI controller and it can be used as reliable,
constant IRQ generator. On the other hand, IR context can include skip
cycle according to isoc packet transferred by device.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191018061911.24909-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-19 09:18:26 +02:00
Takashi Sakamoto
813dfbd684 ALSA: firewire-lib: cancel flushing isoc context in the laste step to process context callback
The aim of AMDTP domain is to process several isoc context in the same
time. However, current implementation is against this idea because it
flushes each isoc context in the end of processing context callback.

This commit cancels it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191018061911.24909-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-19 09:18:25 +02:00
Takashi Sakamoto
e6dcc92fce ALSA: firewire-lib: replace ack callback to flush isoc contexts in AMDTP domain
An isoc context for AMDTP stream is flushed to queue packet
by a call of pcm.ack. This commit extends this for AMDTP
domain.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191018061911.24909-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-19 09:18:22 +02:00
Takashi Sakamoto
f890f9a04b ALSA: firewire-lib: replace pointer callback to flush isoc contexts in AMDTP domain
An isoc context for AMDTP stream is flushed to queue packet
by a call of pcm.pointer. This commit extends this for AMDTP
domain.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191018061911.24909-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-19 09:18:20 +02:00
Takashi Sakamoto
03b4816dcb ALSA: firewire-lib: add irq_target member into amdtp_domain struct
This commit is a preparation to handle several IR/IT contexts in the same
domain by tasklet context for one of the IT context. Such IT context is
stored to AMDTP domain structure as 'irq_target'.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20191018061911.24909-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-10-19 09:18:19 +02:00
Ingo Molnar
ae79d5588a perf/core: Fix !CONFIG_PERF_EVENTS build warnings and failures
sparc64 runs into this warning:

  include/linux/security.h:1913:52: warning: 'struct perf_event' declared inside parameter list will not be visible outside of this definition or declaration

which is escalated to a build error in some of the .c files due to -Werror.

Fix it via a forward declaration, like we do for perf_event_attr, the stub inlines
don't actually need to know the structure of this struct.

Fixes: da97e18458: ("perf_event: Add support for LSM and SELinux checks")
Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org>
Cc: linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-10-19 09:15:27 +02:00
Linus Torvalds
d418d07005 for-linus-2019-10-18
-----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCAAuFiEEwPw5LcreJtl1+l5K99NY+ylx4KYFAl2qbF0QHGF4Ym9lQGtl
 cm5lbC5kawAKCRD301j7KXHgptsuEADEKL8pta74uy50pl0t8l9fZ++U+wdIeEIW
 9uumpOEPnI2GpkG1sOyKWK6tl8InQLw6pAquP9MoT2BHXqFHk7NIgtvk67lwQeoc
 dRwklVfvOLAdnKzyfODqE9Fh9BgczZIuOLzgdtNqrPKqgJfFRCwN94Kj/r2tYuy7
 v+riK3A49u12dOLtjU6ciNgZ0m1iUX9s0+PFYVUXtJHU/1OYToQaKP+sgWiue0Ca
 VJP/L4MLYD0a7tfd92WAK7xWLsYWTDw1Gg20hXH/tV+IIDQ5+OXhu2s6PuqI7c0y
 cZqWHQHBDkZMQvT8+V+YqZtEa+xwVCom51prJEPasmdq3fGx+2sDC1HQiySao1ML
 wfFxZvFvY9fm6M7p2xsSNEcOmamrx1aLLyNSbjIvAqLUDYJWWS56BHsKyTU5Z+Jp
 RA9dpq8iR6ISaIAcFf0IB0pJSv1HEeHyo/ixlALqezBFJaMdhWy/M+dEbWKtix9M
 s19ozcpe+omN9+O0anlLtzKNgj2Xnjiwuu8mhVcqn6uG/p6GUOup+lNvTW/fig3I
 JBH8kObjYXL181V9rYVqFutnuqcf2HYqMvV2vzAmg4LYnPVUmU7HMj8zEpxc4N+f
 Evd77j0wXmY9S+4JERxaqQZuvKBEIkvM1rkk3N4NbNghfa7QL4aW+I9cWtuelPC2
 E+DK7if0Gg==
 =rvkw
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-2019-10-18' of git://git.kernel.dk/linux-block

Pull block fixes from Jens Axboe:

 - NVMe pull request from Keith that address deadlocks, double resets,
   memory leaks, and other regression.

 - Fixup elv_support_iosched() for bio based devices (Damien)

 - Fixup for the ahci PCS quirk (Dan)

 - Socket O_NONBLOCK handling fix for io_uring (me)

 - Timeout sequence io_uring fixes (yangerkun)

 - MD warning fix for parameter default_layout (Song)

 - blkcg activation fixes (Tejun)

 - blk-rq-qos node deletion fix (Tejun)

* tag 'for-linus-2019-10-18' of git://git.kernel.dk/linux-block:
  nvme-pci: Set the prp2 correctly when using more than 4k page
  io_uring: fix logic error in io_timeout
  io_uring: fix up O_NONBLOCK handling for sockets
  md/raid0: fix warning message for parameter default_layout
  libata/ahci: Fix PCS quirk application
  blk-rq-qos: fix first node deletion of rq_qos_del()
  blkcg: Fix multiple bugs in blkcg_activate_policy()
  io_uring: consider the overflow of sequence for timeout req
  nvme-tcp: fix possible leakage during error flow
  nvmet-loop: fix possible leakage during error flow
  block: Fix elv_support_iosched()
  nvme-tcp: Initialize sk->sk_ll_usec only with NET_RX_BUSY_POLL
  nvme: Wait for reset state when required
  nvme: Prevent resets during paused controller state
  nvme: Restart request timers in resetting state
  nvme: Remove ADMIN_ONLY state
  nvme-pci: Free tagset if no IO queues
  nvme: retain split access workaround for capability reads
  nvme: fix possible deadlock when nvme_update_formats fails
2019-10-18 22:29:36 -04:00
Linus Torvalds
dfdcff3215 RISC-V updates for v5.4-rc4
Some RISC-V fixes for v5.4-rc4:
 
 - Fix the virtual memory layout so the fixaddr region doesn't overlap
   with other regions.  (This was originally intended to go in as part
   of an earlier patch, but I inadvertently dropped it during a
   rebase.)
 
 - Add the DT chosen/stdout-path property to the HiFive Unleashed DT
   file.  This is so "earlycon" can be specified with no arguments on
   the kernel command line, and the correct UART will be automatically
   selected.
 
 And two cleanup patches:
 
 - Simplify the code in our breakpoint trap handler.
 
 - Drop a comment in our TLB flush code that has caused some confusion.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEElRDoIDdEz9/svf2Kx4+xDQu9KksFAl2qS2MACgkQx4+xDQu9
 KksbNg/9FkWN0OvkFNWvj79IYYSc5wvdntTnDdaij9a5/RQ/mTQKjB411ZnL99Yt
 7ac+NxzJAJ2i3h+D0ijudwY27vAbvVBEA4rT4SDjo5ENa7ceomt5tdCGmRKaJVpN
 Qz5Tvhx+KYJ3iROp8+MLkYzIgHFpB4vcSVwruxi5r5Dtnr+doclzgD6bAuzEz3It
 AQ00upeuB02cbTsu5OclFQ+6BuJ+V2ERQ3CQzNs9+p69ax/1etCYY+n+ZDwhlZ0U
 XoXSVs8hn9zjFviU0CySCVwReoZUAermU+q7r06BxWrLHixAmIQEgNZGKc3E+KRt
 nvMKlgjGFMpSo28OrJS7ron2jjC9bGLpI177SgelnH5lZCAyx/xWT9snk51AUyv0
 aCVwEZVVSsohfNB5d7zkZq3uWHnoxOlGcISkBe0bVER4o8jBKNYJcF1rjQKt2dYR
 +4zZVpQNS9aOyrvpa4zIKIyuy4sxuOgE1gNmgVU/rEOpzgysqM+zqzW2JJ9UKJdd
 9IXFGpUYSJMAQxIEslSfEQ2Ep+L/n1AMGn4fFEDdNiDGYwC6miLxrLc1zw6MR3DA
 ds470VAZL6uvt0TvSWxRLVI/2LA80S2TrfzEcHp/Stzc8U/wPppO4ZCw7npgTYfa
 qMedZQm58+t99/Uh1RXRWq8ciC/3aC490WtrN6ZgMofZRyLU4XI=
 =aGYX
 -----END PGP SIGNATURE-----

Merge tag 'riscv/for-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Paul Walmsley:
 "Some RISC-V fixes:

   - Fix the virtual memory layout so the fixaddr region doesn't overlap
     with other regions. (This was originally intended to go in as part
     of an earlier patch, but I inadvertently dropped it during a
     rebase)

   - Add the DT chosen/stdout-path property to the HiFive Unleashed DT
     file. This is so "earlycon" can be specified with no arguments on
     the kernel command line, and the correct UART will be automatically
     selected.

  And two cleanup patches:

   - Simplify the code in our breakpoint trap handler.

   - Drop a comment in our TLB flush code that has caused some
     confusion"

* tag 'riscv/for-v5.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: fix virtual address overlapped in FIXADDR_START and VMEMMAP_START
  riscv: tlbflush: remove confusing comment on local_flush_tlb_all()
  riscv: dts: HiFive Unleashed: add default chosen/stdout-path
  riscv: remove the switch statement in do_trap_break()
2019-10-18 22:26:18 -04:00
Lucas De Marchi
7acf6c9495 drm/i915: prettify MST debug message
s/?/:/ so it gets correctly colored by dmesg.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011010907.103309-7-lucas.demarchi@intel.com
2019-10-18 17:28:24 -07:00
Lucas De Marchi
73cefd903d drm/i915: add pipe id/name to pipe mismatch logs
This way it's easier to figure out what didn't match when we have
multiple pipes enabled.

v2: pass drm_crtc and use the more common [CRTC:%d:%s] format
    (Ville)
v3: use struct intel_crtc type to pass crtc around (Ville)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015164029.18431-5-lucas.demarchi@intel.com
2019-10-18 17:28:20 -07:00
Lucas De Marchi
cbd9b9f2e7 drm/i915: remove extra new line on pipe_config mismatch
The new line is already added by pipe_config_mismatch(), so the callers
shouldn't add it.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011010907.103309-5-lucas.demarchi@intel.com
2019-10-18 17:28:16 -07:00
Lucas De Marchi
10d987fd1b drm/i915: fix port checks for MST support on gen >= 11
Both Ice Lake and Elkhart Lake (gen 11) support MST on all external
connections except DDI A. Tiger Lake (gen 12) supports on all external
connections.

Move the check to happen inside intel_dp_mst_encoder_init() and add
specific platform checks.

v2: Replace != with == checks for ports on gen < 11 (Ville)

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191015164029.18431-3-lucas.demarchi@intel.com
2019-10-18 17:28:12 -07:00
Lucas De Marchi
327f8d8c33 drm/i915: simplify setting of ddi_io_power_domain
Instead of the ever growing switch, just compute the ddi io power domain
based on the port number.

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191011010907.103309-2-lucas.demarchi@intel.com
2019-10-18 17:28:08 -07:00
Balsundar P
c695793b52 scsi: aacraid: bump version
Bump version to 50877.

Link: https://lore.kernel.org/r/1571120524-6037-8-git-send-email-balsundar.p@microsemi.com
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-18 19:34:18 -04:00
Balsundar P
26c54d0ec2 scsi: aacraid: send AIF request post IOP RESET
After IOP reset completion, AIF request command is not issued to the
controller. Driver schedules a worker thread to issue a AIF request command
after IOP reset completion.

[mkp: fix zeroday warning]

Link: https://lore.kernel.org/r/1571120524-6037-7-git-send-email-balsundar.p@microsemi.com
Acked-by: Balsundar P < Balsundar.P@microchip.com>
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-18 19:34:18 -04:00
Balsundar P
572ee53a9b scsi: aacraid: check adapter health
Currently driver waits for the command IOCTL from the firmware and if the
firmware enters nonresponsive state, the driver doesn't respond till the
firmware is responsive again.

Check that firmware is alive, otherwise return -EBUSY.

[mkp: clarified commit desc]

Link: https://lore.kernel.org/r/1571120524-6037-6-git-send-email-balsundar.p@microsemi.com
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-18 19:34:18 -04:00
Balsundar P
e2fd90dd2e scsi: aacraid: setting different timeout for src and thor
Set 180 second timeout for thor and 60 seconds for src controllers.

Link: https://lore.kernel.org/r/1571120524-6037-5-git-send-email-balsundar.p@microsemi.com
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-18 19:34:18 -04:00
Balsundar P
c02a3342ba scsi: aacraid: fixed firmware assert issue
Before issuing IOP reset, INTX mode is selected. This is triggering MSGU
lockup and ended in basecode assert. Use DROP_IO command when IOP reset is
sent in preparation for interrupt mode switch.

Link: https://lore.kernel.org/r/1571120524-6037-4-git-send-email-balsundar.p@microsemi.com
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-18 19:34:17 -04:00
Balsundar P
f2244c1b35 scsi: aacraid: fixed IO reporting error
The problem is the driver detects FastResponse bit set and saves it to
Fib's flags to not check IO response status, but it never clears it for
next IO. Hence the next IO will pick up FastResponse bit to not check
the IO response status and fail to report any type IO error to kernel

Link: https://lore.kernel.org/r/1571120524-6037-3-git-send-email-balsundar.p@microsemi.com
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-18 19:34:17 -04:00
Balsundar P
c86fbe484c scsi: aacraid: fix illegal IO beyond last LBA
The driver fails to handle data when read or written beyond device reported
LBA, which triggers kernel panic

Link: https://lore.kernel.org/r/1571120524-6037-2-git-send-email-balsundar.p@microsemi.com
Signed-off-by: Balsundar P <balsundar.p@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-18 19:34:17 -04:00
Toke Høiland-Jørgensen
05679ca6fe xdp: Prevent overflow in devmap_hash cost calculation for 32-bit builds
Tetsuo pointed out that without an explicit cast, the cost calculation for
devmap_hash type maps could overflow on 32-bit builds. This adds the
missing cast.

Fixes: 6f9d451ab1 ("xdp: Add devmap_hash map type for looking up devices by hashed index")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20191017105702.2807093-1-toke@redhat.com
2019-10-18 16:18:42 -07:00
Manasi Navare
a6c948f982 drm/i915/display/icl: In port sync mode disable slaves first then master
In the transcoder port sync mode, the slave transcoders mask their vblanks
until master transcoder's vblank so while disabling them, make
sure slaves are disabled first and then the masters.

v5:
* Dont pass dev priv to get_slave_crtc (Ville)
v4:
* Obtain slave state from master (Maarten)
v3:
* Rebase
v2:
* Use the intel_old_crtc_state_disables() helper

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-6-manasi.d.navare@intel.com
2019-10-18 15:56:13 -07:00
Manasi Navare
51528afe7c drm/i915/display/icl: Disable transcoder port sync as part of crtc_disable() sequence
This clears the transcoder port sync bits of the TRANS_DDI_FUNC_CTL2
register during crtc_disable().

v3:
* Rebase on maarten's patches
v2:
* Directly write the trans_port_sync reg value (Maarten)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-5-manasi.d.navare@intel.com
2019-10-18 15:55:32 -07:00
Manasi Navare
eadf6f9170 drm/i915/display/icl: Enable master-slaves in trans port sync
As per the display enable sequence, we need to follow the enable sequence
for slaves first with DP_TP_CTL set to Idle and configure the transcoder
port sync register to select the corersponding master, then follow the
enable sequence for master leaving DP_TP_CTL to idle.
At this point the transcoder port sync mode is configured and enabled
and the Vblanks of both ports are synchronized so then set DP_TP_CTL
for the slave and master to Normal and do post crtc enable updates.

v11:
* Rebase (Manasi)
v10:
* in trans sync mode, dont stop link train for tgl (Manasi)
v9:
Remove update_scanline_offset to rebase on Maarten's patch (Manasi)
v8:
* Rebase on Maarten's patches (Manasi)
v7:
* Use ffs(slaves) to get slave crtc (Ville)
v6:
* Modeset implies active_changed, remove one condition (Maarten)
v5:
* Fix checkpatch warning (Manasi)
v4:
* Reuse skl_commit_modeset_enables() hook (Maarten)
* Obtain slave crtc and states from master (Maarten)
v3:
* Rebase on drm-tip (Manasi)
v2:
* Create a icl_update_crtcs hook (Maarten, Danvet)
* This sequence only for CRTCs in trans port sync mode (Maarten)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-4-manasi.d.navare@intel.com
2019-10-18 15:53:52 -07:00
Manasi Navare
ba5f1ae95d drm/i915/display/icl: HW state readout for transcoder port sync config
After the state is committed, we readout the HW registers and compare
the HW state with the SW state that we just committed.
For Transcdoer port sync, we add master_transcoder and the
salves bitmask to the crtc_state, hence we need to read those during
the HW state readout to avoid pipe state mismatch.

v11:
* Move master trans init to get pipe_Config hooks (Ville)
v10:
* Initialize master_tarnscoder readout for all platforms (Ville)
v9:
* Initialize master_transcoder = INVALID at get config (Ville)
v8:
* Use master_select -1, address TRANS_EDP case (Ville)
* Rename master_transcoder to _readout (Lucas)
v7:
* NDont read HW state for DSI
v6:
* Go through both parts of HW readout (Maarten)
* Add a WARN if the same trans configured as
master and slave (Ville, Maarten)
v5:
* Add return INVALID in defaut case (Maarten)
v4:
* Get power domains in master loop for get_config (Ville)
v3:
* Add TRANSCODER_D (Maarten)
* v3 Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
v2:
* Add Transcoder_D and MISSING_CASE (Maarten)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-3-manasi.d.navare@intel.com
2019-10-18 15:52:50 -07:00
Manasi Navare
705135bd73 drm/i915/display/icl: Enable TRANSCODER PORT SYNC for tiled displays across separate ports
In case of tiled displays where different tiles are displayed across
different ports, we need to synchronize the transcoders involved.
This patch implements the transcoder port sync feature for
synchronizing one master transcoder with one or more slave
transcoders. This is only enbaled in slave transcoder
and the master transcoder is unaware that it is operating
in this mode.
This has been tested with tiled display connected to ICL.

v7:
* Rebase on Maarten's patches
v6:
* Use master_trans +1 and address missing trans_edp case (Ville)
v5:
* Add TRANSCODER_D case and MISSING_CASE (Maarten)
v4:
Rebase
v3:
* Check of DP_MST moved to atomic_check (Maarten)
v2:
* Do not use RMW, just write to the register in commit (Jani N)

Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-2-manasi.d.navare@intel.com
2019-10-18 15:52:13 -07:00
Manasi Navare
bfb926e323 drm/i915/display/icl: Save Master transcoder in slave's crtc_state for Transcoder Port Sync
In case of tiled displays when the two tiles are sent across two CRTCs
over two separate DP SST connectors, we need a mechanism to synchronize
the two CRTCs and their corresponding transcoders.
So use the master-slave mode where there is one master corresponding
to last horizontal and vertical tile that needs to be genlocked with
all other slave tiles.
This patch identifies saves the master transcoder in all the slave
CRTC states. This is needed to select the master CRTC/transcoder
while configuring transcoder port sync for the corresponding slaves.

v6:
Rebase (manasi)
v5:
* Address Ville's comments
* Just pass crtc_state, no need to check GEN (Ville)
v4:
* Rebase
v3:
* Use master_tramscoder instead of master_crtc for valid
HW state readouts (Ville)
v2:
* Move this to intel_mode_set_pipe_config(Jani N, Ville)
* Use slave_bitmask to save associated slaves in master crtc state (Ville)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191018172725.1338-1-manasi.d.navare@intel.com
2019-10-18 15:51:37 -07:00
Linus Torvalds
b9959c7a34 filldir[64]: remove WARN_ON_ONCE() for bad directory entries
This was always meant to be a temporary thing, just for testing and to
see if it actually ever triggered.

The only thing that reported it was syzbot doing disk image fuzzing, and
then that warning is expected.  So let's just remove it before -rc4,
because the extra sanity testing should probably go to -stable, but we
don't want the warning to do so.

Reported-by: syzbot+3031f712c7ad5dd4d926@syzkaller.appspotmail.com
Fixes: 8a23eb804c ("Make filldir[64]() verify the directory entry filename is valid")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-18 18:41:16 -04:00
Linus Torvalds
6b95cf9b8b A future-proofing decoding fix from Jeff intended for stable and
a patch for a mostly benign race from Dongsheng.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl2qAEkTHGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzi4mZB/9HMfEfZ8JC9keyVaJpAyvV8ufTR4qs
 4b8NNc0MDM01z1Z23G0o89b5M0WEDcGslh25plCifxyNIMa+L/lYKl8CTr7CLVQS
 qCEtNgJ7ibfM26v7rfHOlk6Nnd07/OmjcioaHu/R3bqEQmXpcWQg+aX9C6mPh/2f
 yzZTKZdKhTZfUyQQctuhNo9G+wD8K86DYT1XRbubPNQ3VtXKPuNH9rLhvLCZzbVA
 6FHW05A4mwSv80MsLgN6qLSKxv/+LjV/voHepH4HygqUKw2+1lwi9BC/4k7sprQs
 1jFONZ0p1sv/LdWwJYUyCpwj6d3NliXM0uvYxfyzKveWWCxb3l3gaWUS
 =7scd
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-5.4-rc4' of git://github.com/ceph/ceph-client

Pull ceph fixes from Ilya Dryomov:
 "A future-proofing decoding fix from Jeff intended for stable and a
  patch for a mostly benign race from Dongsheng"

* tag 'ceph-for-5.4-rc4' of git://github.com/ceph/ceph-client:
  rbd: cancel lock_dwork if the wait is interrupted
  ceph: just skip unrecognized info in ceph_reply_info_extra
2019-10-18 18:30:09 -04:00
Tony Luck
e80634a75a EDAC, skx: Retrieve and print retry_rd_err_log registers
Skylake logs some additional useful information in per-channel
registers in addition the the architectural status/addr/misc
logged in the machine check bank.

Pick up this information and add it to the EDAC log:

	retry_rd_err_[five 32-bit register values]

Sorry, no definitions for these registers. OEMs and DIMM vendors
will be able to use them to isolate which cells in the DIMM are
causing problems.

	correrrcnt[per rank corrected error counts]

Note that if additional errors are logged while these registers are
being read, you may see a jumble of values some from earlier errors,
others from later errors (since the registers report the most recent
logged error). The correrrcnt registers provide error counts per possible
rank. If these counts only change by one since the previous error logged
for this channel, then it is safe to assume that the registers logged
provide a coherent view of one error.

With this change EDAC logs look like this:

EDAC MC4: 1 CE memory read error on CPU_SrcID#2_MC#0_Chan#1_DIMM#0 (channel:1 slot:0 page:0x8f26018 offset:0x0 grain:32 syndrome:0x0 -  err_code:0x0101:0x0091 socket:2 imc:0 rank:0 bg:0 ba:0 row:0x1f880 col:0x200 retry_rd_err_log[0001a209 00000000 00000001 04800001 0001f880] correrrcnt[0001 0000 0000 0000 0000 0000 0000 0000])

Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-10-18 15:27:58 -07:00
Tony Luck
29b8e84fbc EDAC, skx_common: Refactor so that we initialize "dev" in result of adxl decode.
Simplifies the code a little.

Acked-by: Aristeu Rozanski <aris@redhat.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
2019-10-18 15:27:48 -07:00
Linus Torvalds
fb8527e5c1 - Fix DM snapshot deadlock that can occur due to COW throttling
preventing locks from being released.
 
 - Fix DM cache's GFP_NOWAIT allocation failure error paths by switching
   to GFP_NOIO.
 
 - Make __hash_find() static in the DM clone target.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEJfWUX4UqZ4x1O2wixSPxCi2dA1oFAl2pyB0THHNuaXR6ZXJA
 cmVkaGF0LmNvbQAKCRDFI/EKLZ0DWgevB/9+YCl73OAJfvT2d74ZO+2qNU8LiWVF
 /kGlClB7Z7lIyoe7ikwR5wQzmflxqOjBss6/ISOQ7lgizpzNL3xj4LCJnmaoDfDg
 pjzBevFI7U/Dknx+J6+RHGDRfIFMBHF119+QY1ayjsYpaqVPZQcZI74ZbPJzJoky
 lrlBbXuW1jClIvsvzN1wfYX3jua7kpGGYlWiEqezWLuv8tfz/6A28chCkjx9/SlN
 VaIXb2dZuODXpT/0m9HRjAnk04ceqV6fXRhpQp217WR/foK8/EUWznKmWP9d1nLN
 hkuqIOVQA0AfUvJFMVf9PrZz4TdIICV9fz6+tOogRqYMBEe3sU1chmIB
 =93dq
 -----END PGP SIGNATURE-----

Merge tag 'for-5.4/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM snapshot deadlock that can occur due to COW throttling
   preventing locks from being released.

 - Fix DM cache's GFP_NOWAIT allocation failure error paths by switching
   to GFP_NOIO.

 - Make __hash_find() static in the DM clone target.

* tag 'for-5.4/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache: fix bugs when a GFP_NOWAIT allocation fails
  dm snapshot: rework COW throttling to fix deadlock
  dm snapshot: introduce account_start_copy() and account_end_copy()
  dm clone: Make __hash_find static
2019-10-18 18:26:07 -04:00
Linus Torvalds
90105ae1ee IOMMU Fixes for Linux v5.4-rc3:
Including:
 
 	- Fixes for page-table issues on Mali GPUs
 
 	- Missing free in an error path for ARM-SMMU
 
 	- PASID decoding in the AMD IOMMU Event log code
 
 	- Another update for the locking fixes in the AMD IOMMU driver
 
 	- Reduce the calls to platform_get_irq() in the IPMMU-VMSA and
 	  Rockchip IOMMUs to get rid of the warning message added to this
 	  function recently
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEr9jSbILcajRFYWYyK/BELZcBGuMFAl2p08MACgkQK/BELZcB
 GuMlzA/7Bs9TTOr6Cn0idE3FY9T998ZezYi1vLInlyfe+5dD0NZThn1QCDUguTjA
 KLaWkNkQUPsPr36EWEgrh85mCeUMjf/WB/ua7zUHKdox4om5bQwtb4o8dnDfsrzr
 V2geah7mwuzTtksTsNhC8oHqHHT2bMw/Uw0ykMOHyOOrwFQ/fwe2Aj+LTqlOASex
 eUbqeDbE8XkHcflKGjA8r+2fpyaZPUIGj6fSEkxLcgj5S2uDFQJ1Og82TogkQb57
 ox4pex+ZcdJbMJd4kP4iv/AQosuYX83S+nOrICZkdfbXN/YQOqDfhesy3uhHw/du
 +MoFn/lxUA6DX0/hNewuXXH/+uO6JwMOPOZqa+rkxDEDSUQ1NsNALoqUIW3l+CJe
 GWkjObEllWEDb1ddSa6C/x3qKKzleN5XOkZuKFHRuN0gtkgZnceqtHKU3ZGXIBWg
 RP+UjCE6DBujoiWIi2ywE88ccEz0lh/3Aad4TiBlE4zkfphXyF2wfzW9oQntqThQ
 tRPZlJqdc5d1Vx2D743t3Ueq/vvLspbREa8kIDW9MTJESKenK4O+PVca6Q/zy1lI
 d8dJ7uFqO+PyUW19IXoRqFHh2MRDGugcWPkzgagWuyeWqFeCuOMhRQDiwImBCpJo
 BepX1ksmhjACASIq6M7yjV7K/6InXvkakNXTo77hugQIrClvAs8=
 =Pawk
 -----END PGP SIGNATURE-----

Merge tag 'iommu-fixes-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu

Pull iommu fixes from Joerg Roedel:

 - Fixes for page-table issues on Mali GPUs

 - Missing free in an error path for ARM-SMMU

 - PASID decoding in the AMD IOMMU Event log code

 - Another update for the locking fixes in the AMD IOMMU driver

 - Reduce the calls to platform_get_irq() in the IPMMU-VMSA and Rockchip
   IOMMUs to get rid of the warning message added to this function
   recently

* tag 'iommu-fixes-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/amd: Check PM_LEVEL_SIZE() condition in locked section
  iommu/amd: Fix incorrect PASID decoding from event log
  iommu/ipmmu-vmsa: Only call platform_get_irq() when interrupt is mandatory
  iommu/rockchip: Don't use platform_get_irq to implicitly count irqs
  iommu/io-pgtable-arm: Support all Mali configurations
  iommu/io-pgtable-arm: Correct Mali attributes
  iommu/arm-smmu: Free context bitmap in the err path of arm_smmu_init_domain_context
2019-10-18 18:23:16 -04:00
Linus Torvalds
8eb4b3b0dd copy-struct-from-user-v5.4-rc4
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXacV8gAKCRCRxhvAZXjc
 oqaZAQDG+ziyN6umUemQPEX1Ar+FOJPIwDrEJdMRmoz3ozTFQAEA0RxquU3LkVnR
 Rx9wX07ObZB5nMi/V4yANpuH7Vbzrg4=
 =7JJk
 -----END PGP SIGNATURE-----

Merge tag 'copy-struct-from-user-v5.4-rc4' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux

Pull usercopy test fixlets from Christian Brauner:
 "This contains two improvements for the copy_struct_from_user() tests:

   - a coding style change to get rid of the ugly "if ((ret |= test()))"
     pointed out when pulling the original patchset.

   - avoid a soft lockups when running the usercopy tests on machines
     with large page sizes by scanning only a 1024 byte region"

* tag 'copy-struct-from-user-v5.4-rc4' of gitolite.kernel.org:pub/scm/linux/kernel/git/brauner/linux:
  usercopy: Avoid soft lockups in test_check_nonzero_user()
  lib: test_user_copy: style cleanup
2019-10-18 18:19:04 -04:00
Tony Lindgren
c145649bf2 ARM: OMAP2+: Configure voltage controller for cpcap to low-speed
Looks like the i2c timings in high-speed mode do not work properly to
allow us to clear I2C_DISABLE bits for PRM_VOLTCTRL register and the
device reboots if I2C_DISABLE bits are cleared.

Let's configure the voltage controller i2c for low-speed mode as done in
the Motorola Mapphone Android Linux kernel. This saves us about 7mW of
power during retention compared to the high-speed values.

Let's also change the low-speed warning to pr_info about relying on the
bootloader configured low-speed values like we currently do.

Cc: Merlijn Wajer <merlijn@wizzup.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2019-10-18 15:09:54 -07:00
Andy Shevchenko
161eea1b25 PCI/AER: Fix kernel-doc warnings
Kernel-doc validator complains:

  aer.c:207: warning: Function parameter or member 'str' not described in 'pcie_ecrc_get_policy'
  aer.c:1209: warning: Function parameter or member 'irq' not described in 'aer_isr'
  aer.c:1209: warning: Function parameter or member 'context' not described in 'aer_isr'
  aer.c:1209: warning: Excess function parameter 'work' description in 'aer_isr'

Fix the above accordingly.

Link: https://lore.kernel.org/r/20190827151823.75312-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-10-18 17:05:43 -05:00
Andy Shevchenko
6a8c97345a PCI/AER: Use for_each_set_bit() to simplify code
Simplify error counting code by using for_each_set_bit() library function.

Link: https://lore.kernel.org/r/20190827151823.75312-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2019-10-18 17:05:43 -05:00
Rajat Jain
6458b438eb PCI/AER: Add PoisonTLPBlocked to Uncorrectable error counters
The elements in the aer_uncorrectable_error_string[] refer to the bit names
in Uncorrectable Error Status Register.  Add PoisonTLPBlocked, which was
added in PCIe r3.1, sec 7.10.2.

Link: https://lore.kernel.org/r/20190827222145.32642-1-rajatja@google.com
Signed-off-by: Rajat Jain <rajatja@google.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2019-10-18 17:05:42 -05:00
Patel, Mayurkumar
af65d1ad41 PCI/AER: Save AER Capability for suspend/resume
Previously we did not save and restore the AER configuration on
suspend/resume, so the configuration may be lost after resume.

Save the AER configuration during suspend and restore it during resume.

[bhelgaas: commit log]
Link: https://lore.kernel.org/r/92EBB4272BF81E4089A7126EC1E7B28492C3B007@IRSMSX101.ger.corp.intel.com
Signed-off-by: Mayurkumar Patel <mayurkumar.patel@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-10-18 17:05:42 -05:00
Avri Altman
74e5e468b6 scsi: ufs-bsg: Wake the device before sending raw upiu commands
The scsi async probe process is calling blk_pm_runtime_init for each lun,
and then those request queues are monitored by the block layer pm
engine (blk-pm.c).  This is however, not the case for scsi-passthrough
queues, created by bsg_setup_queue().

So the ufs-bsg driver might send various commands, disregarding the pm
status of the device. This is wrong, regardless if its request queue is
pm-aware or not.

Fixes: df032bf27a (scsi: ufs: Add a bsg endpoint that supports UPIUs)
Link: https://lore.kernel.org/r/1570696267-8487-1-git-send-email-avri.altman@wdc.com
Reported-by: Yuliy Izrailov <yuliy.izrailov@wdc.com>
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-18 18:02:16 -04:00
Daniel Wagner
535fb49e73 scsi: lpfc: Check queue pointer before use
The queue pointer might not be valid. The rest of the code checks the
pointer before accessing it. lpfc_sli4_process_missed_mbox_completions is
the only place where the check is missing.

Fixes: 657add4e5e ("scsi: lpfc: Fix poor use of hardware queues if fewer irq vectors")
Cc: James Smart <jsmart2021@gmail.com>
Link: https://lore.kernel.org/r/20191018162111.8798-1-dwagner@suse.de
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-10-18 17:59:27 -04:00