0/1 for booleans is perfectly valid C.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Wire up TIF_NOTIFY_SIGNAL handling for nios32.
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
* 'x86/entry' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86: Wire up TIF_NOTIFY_SIGNAL
x86: Reclaim TIF_IA32 and TIF_X32
x86/mm: Convert mmu context ia32_compat into a proper flags field
x86/elf: Use e_machine to check for x32/ia32 in setup_additional_pages()
elf: Expose ELF header on arch_setup_additional_pages()
x86/elf: Use e_machine to select start_thread for x32
elf: Expose ELF header in compat_start_thread()
x86/elf: Use e_machine to choose DLINFO in compat
x86/oprofile: Avoid TIF_IA32 when checking 64bit mode
x86/compat: Simplify compat syscall userspace allocation
perf/x86: Avoid TIF_IA32 when checking 64bit mode
A break is not needed if it is preceded by a return
Acked-by: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20201019193227.12738-1-trix@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Even though one iteration is not enough for the dirty log performance
test (due to the cost of building page tables, zeroing memory etc.)
two is okay and it is the default. Without this patch,
"./dirty_log_perf_test" without any further arguments fails.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This prevents the other headings like "Options" and "Specification" from
leaking out and being listed separately in the table of contents.
Link: https://lore.kernel.org/r/20201108004045.1378676-1-j.neuschaefer@gmx.net
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Jan Kara <jack@suse.cz>
-----BEGIN PGP SIGNATURE-----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=SPWC
-----END PGP SIGNATURE-----
Merge tag 'core-entry-notify-signal' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into tif-task_work.arch
Core changes to support TASK_NOTIFY_SIGNAL
* tag 'core-entry-notify-signal' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
task_work: Use TIF_NOTIFY_SIGNAL if available
entry: Add support for TIF_NOTIFY_SIGNAL
signal: Add task_sigpending() helper
According to the ACPI spec 9.1.1 _DSM (Device Specific Method),
intel_hid_dsm_fn_mask, acquired from function index 0, is "a buffer
containing one bit for each function index". When validitaing fn_index,
it should be compared with corresponding bit.
This buffer is usually longer than a byte. Depending on whether
INTEL_HID_DSM_HEBC_V2_FN exist, it could be either
"Buffer (0x02) { 0xFF, 0x01 }" or "Buffer (0x02) { 0xFF, 0x03 }".
Probably it won't grow larger according to the description. On older
platforms, available functions could be fewer or not supported at all,
i.e., "Buffer (One) { 0x00 }".
Signed-off-by: Zhen Gong <zhengong@usc.edu>
Link: https://lore.kernel.org/r/CAJCLVRCyp0ASdWTx-PxsrDC9zFBPw0U2AtPip+_Hpj2r5gUPwA@mail.gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The gma500 driver expects 3 pipelines in several it's IRQ functions.
Accessing struct drm_device.vblank[], this fails with devices that only
have 2 pipelines. An example KASAN report is shown below.
[ 62.267688] ==================================================================
[ 62.268856] BUG: KASAN: slab-out-of-bounds in psb_irq_postinstall+0x250/0x3c0 [gma500_gfx]
[ 62.269450] Read of size 1 at addr ffff8880012bc6d0 by task systemd-udevd/285
[ 62.269949]
[ 62.270192] CPU: 0 PID: 285 Comm: systemd-udevd Tainted: G E 5.10.0-rc1-1-default+ #572
[ 62.270807] Hardware name: /DN2800MT, BIOS MTCDT10N.86A.0164.2012.1213.1024 12/13/2012
[ 62.271366] Call Trace:
[ 62.271705] dump_stack+0xae/0xe5
[ 62.272180] print_address_description.constprop.0+0x17/0xf0
[ 62.272987] ? psb_irq_postinstall+0x250/0x3c0 [gma500_gfx]
[ 62.273474] __kasan_report.cold+0x20/0x38
[ 62.273989] ? psb_irq_postinstall+0x250/0x3c0 [gma500_gfx]
[ 62.274460] kasan_report+0x3a/0x50
[ 62.274891] psb_irq_postinstall+0x250/0x3c0 [gma500_gfx]
[ 62.275380] drm_irq_install+0x131/0x1f0
<...>
[ 62.300751] Allocated by task 285:
[ 62.301223] kasan_save_stack+0x1b/0x40
[ 62.301731] __kasan_kmalloc.constprop.0+0xbf/0xd0
[ 62.302293] drmm_kmalloc+0x55/0x100
[ 62.302773] drm_vblank_init+0x77/0x210
Resolve the issue by only handling vblank entries up to the number of
CRTCs.
I'm adding a Fixes tag for reference, although the bug has been present
since the driver's initial commit.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 5c49fd3aa0 ("gma500: Add the core DRM files and headers")
Cc: Alan Cox <alan@linux.intel.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org#v3.3+
Link: https://patchwork.freedesktop.org/patch/msgid/20201105190256.3893-1-tzimmermann@suse.de
The default value of inotify.max_user_watches sysctl parameter was set
to 8192 since the introduction of the inotify feature in 2005 by
commit 0eeca28300 ("[PATCH] inotify"). Today this value is just too
small for many modern usage. As a result, users have to explicitly set
it to a larger value to make it work.
After some searching around the web, these are the
inotify.max_user_watches values used by some projects:
- vscode: 524288
- dropbox support: 100000
- users on stackexchange: 12228
- lsyncd user: 2000000
- code42 support: 1048576
- monodevelop: 16384
- tectonic: 524288
- openshift origin: 65536
Each watch point adds an inotify_inode_mark structure to an inode to
be watched. It also pins the watched inode.
Modeled after the epoll.max_user_watches behavior to adjust the default
value according to the amount of addressable memory available, make
inotify.max_user_watches behave in a similar way to make it use no more
than 1% of addressable memory within the range [8192, 1048576].
We estimate the amount of memory used by inotify mark to size of
inotify_inode_mark plus two times the size of struct inode (we double
the inode size to cover the additional filesystem private inode part).
That means that a 64-bit system with 128GB or more memory will likely
have the maximum value of 1048576 for inotify.max_user_watches. This
default should be big enough for most use cases.
Link: https://lore.kernel.org/r/20201109035931.4740-1-longman@redhat.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
The victim inode's parent and name info is required when an event
needs to be delivered to a group interested in filename info OR
when the inode's parent is interested in an event on its children.
Let us call the first condition 'parent_needed' and the second
condition 'parent_interested'.
In fsnotify_parent(), the condition where the inode's parent is
interested in some events on its children, but not necessarily
interested the specific event is called 'parent_watched'.
fsnotify_parent() tests the condition (!parent_watched && !parent_needed)
for sending the event without parent and name info, which is correct.
It then wrongly assumes that parent_watched implies !parent_needed
and tests the condition (parent_watched && !parent_interested)
for sending the event without parent and name info, which is wrong,
because parent may still be needed by some group.
For example, after initializing a group with FAN_REPORT_DFID_NAME and
adding a FAN_MARK_MOUNT with FAN_OPEN mask, open events on non-directory
children of "testdir" are delivered with file name info.
After adding another mark to the same group on the parent "testdir"
with FAN_CLOSE|FAN_EVENT_ON_CHILD mask, open events on non-directory
children of "testdir" are no longer delivered with file name info.
Fix the logic and use auxiliary variables to clarify the conditions.
Fixes: 9b93f33105 ("fsnotify: send event with parent/name info to sb/mount/non-dir marks")
Cc: stable@vger.kernel.org#v5.9
Link: https://lore.kernel.org/r/20201108105906.8493-1-amir73il@gmail.com
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Fix the following coccinelle warnings:
./drivers/platform/x86/intel_pmc_core.c:932:1-16: WARNING: Assignment of 0/1 to bool variable
Signed-off-by: Kaixu Xia <kaixuxia@tencent.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/1604753621-7387-1-git-send-email-kaixuxia@tencent.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When booting a hyperthreaded system with the kernel parameter
'mitigations=auto,nosmt', the following warning occurs:
WARNING: CPU: 0 PID: 1 at drivers/xen/events/events_base.c:1112 unbind_from_irqhandler+0x4e/0x60
...
Hardware name: Xen HVM domU, BIOS 4.2.amazon 08/24/2006
...
Call Trace:
xen_uninit_lock_cpu+0x28/0x62
xen_hvm_cpu_die+0x21/0x30
takedown_cpu+0x9c/0xe0
? trace_suspend_resume+0x60/0x60
cpuhp_invoke_callback+0x9a/0x530
_cpu_up+0x11a/0x130
cpu_up+0x7e/0xc0
bringup_nonboot_cpus+0x48/0x50
smp_init+0x26/0x79
kernel_init_freeable+0xea/0x229
? rest_init+0xaa/0xaa
kernel_init+0xa/0x106
ret_from_fork+0x35/0x40
The secondary CPUs are not activated with the nosmt mitigations and only
the primary thread on each CPU core is used. In this situation,
xen_hvm_smp_prepare_cpus(), and more importantly xen_init_lock_cpu(), is
not called, so the lock_kicker_irq is not initialized for the secondary
CPUs. Let's fix this by exiting early in xen_uninit_lock_cpu() if the
irq is not set to avoid the warning from above for each secondary CPU.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Link: https://lore.kernel.org/r/20201107011119.631442-1-bmasney@redhat.com
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
AMD Power Management Controller driver a.k.a. amd-pmc driver is the
controller which is meant for the final S2Idle transaction that goes to
the PMFW running on the AMD SMU (System Management Unit) responsible for
tuning of the VDD.
Once all the monitored list or the idle constraints are met, this driver
would go and set the OS_HINT (meaning all the devices have reached to
their lowest state possible) via the SMU mailboxes.
This driver would also provide some debug capabilities via debugfs.
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20201105140531.2955555-1-Shyam-sundar.S-k@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When performing an allocation we try split it down into the largest
possible power-of-two blocks/pages-sizes, and for the common case we
expect to allocate the blocks in descending order. This also naturally
fits with our GTT alignment tricks(including the hugepages selftest),
where we sometimes try to align to the largest possible GTT page-size
for the allocation, in the hope that translates to bigger GTT
page-sizes. Currently, we seem to incorrectly add the blocks in the
opposite order, which is definitely not the intended behaviour.
Reported-by: CQ Tang <cq.tang@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201109111249.109365-1-matthew.auld@intel.com
The VDDA LDO1 PMIC output supplies the analog VDDA input of the
STM32MP1 on DHCOM, keep it always on, otherwise there could be
leakage through the SoC.
Fixes: 34e0c7847d ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
The Thinkpad Yoga 11e 4th gen with the N3450 / Celeron CPU only has
one battery which is named BAT1 instead of the expected BAT0, add a
quirk for this. This fixes not being able to set the charging tresholds
on this model; and this alsoe fixes the following errors in dmesg:
ACPI: \_SB_.PCI0.LPCB.EC__.HKEY: BCTG evaluated but flagged as error
thinkpad_acpi: Error probing battery 2
battery: extension failed to load: ThinkPad Battery Extension
battery: extension unregistered: ThinkPad Battery Extension
Note that the added quirk is for the "R0K" BIOS versions which are
used on the Thinkpad Yoga 11e 4th gen's with a Celeron CPU, there
is a separate "R0L" BIOS for the i3/i5 based versions. This may also
need the same quirk, but if that really is necessary is unknown.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201109103550.16265-1-hdegoede@redhat.com
The Yoga 11e series has 2 accelerometers described by a BOSC0200 ACPI node.
This setup relies on a Windows service which reads both accelerometers and
then calculates the angle between the 2 halves to determine laptop / tent /
tablet mode and then reports the calculated mode back to the EC by calling
special ACPI methods on the BOSC0200 node.
The bmc150 iio driver does not support this (it involves double
calculations requiring sqrt and arccos so this really needs to be done
in userspace), as a result of this on the Yoga 11e the thinkpad_acpi
code always reports SW_TABLET_MODE=0, starting with GNOME 3.38 reporting
SW_TABLET_MODE=0 causes GNOME to:
1. Not show the onscreen keyboard when a text-input field is focussed
with the touchscreen.
2. Disable accelerometer based auto display-rotation.
This makes sense when in laptop-mode but not when in tablet-mode. But
since for the Yoga 11e the thinkpad_acpi code always reports
SW_TABLET_MODE=0, GNOME does not know when the device is in tablet-mode.
Stop reporting the broken (always 0) SW_TABLET_MODE on Yoga 11e models
to fix this.
Note there are plans for userspace to support 360 degree hinges style
2-in-1s with 2 accelerometers and figure out the mode by itself, see:
https://gitlab.freedesktop.org/hadess/iio-sensor-proxy/-/issues/216
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201106140130.46820-1-hdegoede@redhat.com
Tested on my P1 gen3, works fine with `thinkfan`. Since thinkpad_acpi fan
control is off by default, it is safe to add 2nd fan control for brave
overclockers
Signed-off-by: Iakov 'Jake' Kirilenko <jake.kirilenko@gmail.com>
Link: https://lore.kernel.org/r/20201105152556.34073-1-jake.kirilenko@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Deferred probe is an expected return value for tegra_output_probe().
Given that the driver deals with it properly, there's no need to output
a warning that may potentially confuse users.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The exit_pi_state_list() function calls put_pi_state() with IRQs disabled
and is not expecting that IRQs will be enabled inside the function.
Use the _irqsave() variant so that IRQs are restored to the original state
instead of being enabled unconditionally.
Fixes: 153fbd1226 ("futex: Fix more put_pi_state() vs. exit_pi_state_list() races")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20201106085205.GA1159983@mwanda
Since this flash doesn't have a Profile 1.0 table, the Octal DTR
capabilities are enabled in the post SFDP fixup, along with the 8D-8D-8D
fast read settings.
Enable Octal DTR mode with 20 dummy cycles to allow running at the
maximum supported frequency of 200Mhz.
The flash supports the soft reset sequence. So, add the flag in the
flash's info.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20201005153138.6437-16-p.yadav@ti.com
The Cypress Semper flash is an xSPI compliant octal DTR flash. Add
support for using it in octal DTR mode.
The flash by default boots in a hybrid sector mode. But the sector map
table on the part I had was programmed incorrectly and the SMPT values
on the flash don't match the public datasheet. Specifically, in some
places erase type 3 was used instead of 4. In addition, the region sizes
were incorrect in some places. So, for testing I set CFR3N[3] to enable
uniform sector sizes. Since the uniform sector mode bit is a
non-volatile bit, this series does not change it to avoid making any
permanent changes to the flash configuration. The correct data to
implement a fixup is not available right now and will be done in a
follow-up patch if needed.
Signed-off-by: Pratyush Yadav <p.yadav@ti.com>
[vigneshr@ti.com: Drop unnecessary sleep in Octal DTR switch sequence]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20201005153138.6437-15-p.yadav@ti.com
Many comments in this module do not comply with the preferred multi-line
comment style as reported by 'scripts/checkpatch.pl':
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
Fix those comments, along with (unreported for some reason?) the starts
of the multi-line comments not being /* on their own line...
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
The kfree() needs to be moved down a line to prevent a use after free.
Fixes: 8c9108d014 ("auxdisplay: add a driver for lcd2s character display")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When building the hd44780_common driver without a driver that actually
uses it like panel or hd44780 you get a build error, because
hd44780_common uses charlcd, but did not select it. Its users did
select it.
This is fixed now. hd4478_common now selects charlcd in Kconfig and
panel and hd44780 do not. They only select hd44780_common.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The VIO regulator is supplied by PMIC Buck3, describe this in the DT.
Fixes: 34e0c7847d ("ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
On the prototype DHCOM, the LED5 was connected to pin PG2 of the
STM32MP15xx, however on the production SoM this was changed to pin
PC6. Update the connection in the DT.
Fixes: 81d5fc7197 ("ARM: dts: stm32: Add GPIO LEDs for STM32MP1 DHCOM PDK2")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
When h5_close() is called, h5 is directly freed when !hu->serdev.
However, h5->rx_skb is not freed, which causes a memory leak.
Freeing h5->rx_skb and setting it to NULL, fixes this memory leak.
Fixes: ce945552fd ("Bluetooth: hci_h5: Add support for serdev enumerated devices")
Reported-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com
Tested-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com
Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
A different wait queue was used when removing ctrl_wait than when adding
it. This effectively made the remove operation without locking compared
to other operations on the wait queue ctrl_wait was part of. This caused
issues like below where dead000000000100 is LIST_POISON1 and
dead000000000200 is LIST_POISON2.
list_add corruption. next->prev should be prev (ffffffc1b0a33a08), \
but was dead000000000200. (next=ffffffc03ac77de0).
------------[ cut here ]------------
CPU: 3 PID: 2138 Comm: bluetoothd Tainted: G O 4.4.238+ #9
...
---[ end trace 0adc2158f0646eac ]---
Call trace:
[<ffffffc000443f78>] __list_add+0x38/0xb0
[<ffffffc0000f0d04>] add_wait_queue+0x4c/0x68
[<ffffffc00020eecc>] __pollwait+0xec/0x100
[<ffffffc000d1556c>] bt_sock_poll+0x74/0x200
[<ffffffc000bdb8a8>] sock_poll+0x110/0x128
[<ffffffc000210378>] do_sys_poll+0x220/0x480
[<ffffffc0002106f0>] SyS_poll+0x80/0x138
[<ffffffc00008510c>] __sys_trace_return+0x0/0x4
Unable to handle kernel paging request at virtual address dead000000000100
...
CPU: 4 PID: 5387 Comm: kworker/u15:3 Tainted: G W O 4.4.238+ #9
...
Call trace:
[<ffffffc0000f079c>] __wake_up_common+0x7c/0xa8
[<ffffffc0000f0818>] __wake_up+0x50/0x70
[<ffffffc000be11b0>] sock_def_wakeup+0x58/0x60
[<ffffffc000de5e10>] l2cap_sock_teardown_cb+0x200/0x224
[<ffffffc000d3f2ac>] l2cap_chan_del+0xa4/0x298
[<ffffffc000d45ea0>] l2cap_conn_del+0x118/0x198
[<ffffffc000d45f8c>] l2cap_disconn_cfm+0x6c/0x78
[<ffffffc000d29934>] hci_event_packet+0x564/0x2e30
[<ffffffc000d19b0c>] hci_rx_work+0x10c/0x360
[<ffffffc0000c2218>] process_one_work+0x268/0x460
[<ffffffc0000c2678>] worker_thread+0x268/0x480
[<ffffffc0000c94e0>] kthread+0x118/0x128
[<ffffffc000085070>] ret_from_fork+0x10/0x20
---[ end trace 0adc2158f0646ead ]---
Signed-off-by: Ole Bjørn Midtbø <omidtbo@cisco.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Avoid multiple attempts to create the debugfs entry, force_bredr_smp,
by moving it from the SMP registration to the BR/EDR controller init
section. hci_debugfs_create_bredr is only called when HCI_SETUP and
HCI_CONFIG is not set.
Signed-off-by: Claire Chang <tientzu@chromium.org>
Reviewed-by: Alain Michaud <alainm@chromium.org>
Reviewed-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
On the prototype DHCOM, the TA3-GPIO-C button was connected to pin PI11 of
the STM32MP15xx, however on the production SoM this was changed to pin PG0
to free up the IRQ line 11 for LAN8710i PHY IRQ. Update the connection in
the DT. Since the IRQ line 0 is used for PMIC as well and cannot be shared
with the button, make the button polled.
Fixes: 87cabf9405 ("ARM: dts: stm32: Add GPIO keys for STM32MP1 DHCOM PDK2")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Patrick Delaunay <patrick.delaunay@st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Some functions have the proper 'kernel-doc' comments but these don't start
with proper /** -- fix that, along with adding () to the function name on
the following lines to fully comply with the 'kernel-doc' format.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
