Some 'kernel-doc' function comments do not fully comply with the specified
format due to:
- missing () after the function name;
- "RETURNS:"/"Returns:" instead of "Return:" when documenting the function's
result.
- empty line before describing the function's arguments.
Signed-off-by: Sergey Shtylyov <s.shtylyov@omprussia.ru>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
When adding device to white list the device is added to resolving list
also. It has to be added only when HCI_ENABLE_LL_PRIVACY flag is set.
HCI_ENABLE_LL_PRIVACY flag has to be tested before adding/deleting devices
to resolving list. use_ll_privacy macro is used only to check if controller
supports LL_Privacy.
https://bugzilla.kernel.org/show_bug.cgi?id=209745
Fixes: 0eee35bdfa ("Bluetooth: Update resolving list when updating whitelist")
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Some platforms keep USB power even when they are powered off and in S5,
this makes Realtek 8821C keep its firmware even after a cold boot, and
make 8821C never load new firmware.
So use vendor specific HCI command to ask 8821C drop its firmware after
system shutdown.
Newer firmware doesn't have this issue so we only use this trick for old
8821C firmware version.
Suggested-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Enhance the ic_id_table that it's able to maintain regularly.
To judge which chip should be initialized by LMP subversion, HCI revision,
HCI version and HCI bus which were given in the ic_id_table.
Also, refine the incorrect LMP subversion of ROM for RTL8723D and
RTL8723A.
Suggested-by: Alex Lu <alex_lu@realsil.com.cn>
Signed-off-by: Max Chou <max.chou@realtek.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
When an LE connection request is made, advertising is disabled and never
resumed. When a client has an active advertisement, this is disruptive.
This change adds resume logic for client-configured (non-directed)
advertisements after the connection attempt.
The patch was tested by registering an advertisement, initiating an LE
connection from a remote peer, and verifying that the advertisement is
re-activated after the connection is established. This is performed on
Hatch and Kukui Chromebooks.
Signed-off-by: Daniel Winkler <danielwinkler@google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
The SG capability is inherently present with Multichannel DMA operation.
The register used to check for this capability with other DMA driver types
is not defined for MCDMA.
Fixes: 6ccd692bfb ("dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support")
Signed-off-by: Matthew Murrian <matthew.murrian@goctsi.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1604473206-32573-4-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Several code sections incorrectly use struct xilinx_axidma_tx_segment
instead of struct xilinx_aximcdma_tx_segment when operating as
Multichannel DMA. As their structures are similar, this just works.
Fixes: 6ccd692bfb ("dmaengine: xilinx_dma: Add Xilinx AXI MCDMA Engine driver support")
Signed-off-by: Matthew Murrian <matthew.murrian@goctsi.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1604473206-32573-3-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The xilinx_dma_poll_timeout macro is sometimes called while holding a
spinlock (see xilinx_dma_issue_pending() for an example) this means we
shouldn't sleep when polling the dma channel registers. To address it
in xilinx poll timeout macro use readl_poll_timeout_atomic instead of
readl_poll_timeout variant.
Signed-off-by: Marc Ferland <ferlandm@amotus.ca>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Link: https://lore.kernel.org/r/1604473206-32573-2-git-send-email-radhey.shyam.pandey@xilinx.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
AMP_MGR is getting derefernced in hci_phy_link_complete_evt(), when called
from hci_event_packet() and there is a possibility, that hcon->amp_mgr may
not be found when accessing after initialization of hcon.
- net/bluetooth/hci_event.c:4945
The bug seems to get triggered in this line:
bredr_hcon = hcon->amp_mgr->l2cap_conn->hcon;
Fix it by adding a NULL check for the hcon->amp_mgr before checking the ev-status.
Fixes: d5e911928b ("Bluetooth: AMP: Process Physical Link Complete evt")
Reported-and-tested-by: syzbot+0bef568258653cff272f@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=0bef568258653cff272f
Signed-off-by: Anmol Karn <anmol.karan123@gmail.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
WCN3991 supports connectable advertisements so we need to add the valid
le states quirk so the 'central-peripheral' role is exposed in
userspace.
Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
This commit adds driver for the FPGA-based LiteUART serial controller
from LiteX SoC builder.
The current implementation supports LiteUART configured
for 32 bit data width and 8 bit CSR bus width.
It does not support IRQ.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>
Instead of printing out the internal engine mask, which can change between
kernel versions making it difficult to map to actual engines, present a
bitmask of hanging engines ABI classes. For example:
[drm] GPU HANG: ecode 9:8:24dffffd, in gem_exec_schedu [1334]
Engine ABI class is useful to quickly categorize render vs media etc hangs
in bug reports. Considering virtual engine even more so than the current
scheme.
v2:
* Do not re-order fields. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105113842.1395391-1-tvrtko.ursulin@linux.intel.com
Between events which trigger engine and GPU resets and capturing the error
state we lose information on which engine triggered the reset. Improve
this by passing in the hung engine mask down to error capture.
Result is that the list of engines in user visible "GPU HANG: ecode
<gen>:<engines>:<ecode>, <process>" is now a list of hanging and not just
active engines. Most importantly the displayed process is now the one
which was actually hung.
v2:
* Stub prototype. (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104134743.916027-1-tvrtko.ursulin@linux.intel.com
Running in hardIRQ, disabling IRQ is redundant since hardIRQ has disabled
IRQ. This patch removes the irqsave and irqstore to save some instruction
cycles.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Cc: Daniel Mack <daniel@zonque.org>
Cc: Haojian Zhuang <haojian.zhuang@gmail.com>
Link: https://lore.kernel.org/r/20201027215252.25820-11-song.bao.hua@hisilicon.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Running in hardIRQ, disabling IRQ is redundant since hardIRQ has disabled
IRQ. This patch removes the irqsave and irqstore to save some instruction
cycles.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20201027215252.25820-10-song.bao.hua@hisilicon.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Running in hardIRQ, disabling IRQ is redundant since hardIRQ has disabled
IRQ. This patch removes the irqsave and irqstore to save some instruction
cycles.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Link: https://lore.kernel.org/r/20201027215252.25820-9-song.bao.hua@hisilicon.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Running in hardIRQ, disabling IRQ is redundant since hardIRQ has disabled
IRQ. This patch removes the irqsave and irqstore to save some instruction
cycles.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Acked-by: Zhou Wang <wangzhou1@hisilicon.com>
Link: https://lore.kernel.org/r/20201027215252.25820-8-song.bao.hua@hisilicon.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Running in hardIRQ, disabling IRQ is redundant since hardIRQ has disabled
IRQ. This patch removes the irqsave and irqstore to save some instruction
cycles.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Link: https://lore.kernel.org/r/20201027215252.25820-7-song.bao.hua@hisilicon.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Running in hardIRQ, disabling IRQ is redundant since hardIRQ has disabled
IRQ. This patch removes the irqsave and irqstore to save some instruction
cycles.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Link: https://lore.kernel.org/r/20201027215252.25820-6-song.bao.hua@hisilicon.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Running in hardIRQ, disabling IRQ is redundant since hardIRQ has disabled
IRQ. This patch removes the irqsave and irqstore to save some instruction
cycles.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Acked-by: Jon Hunter <jonathanh@nvidia.com>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: https://lore.kernel.org/r/20201027215252.25820-5-song.bao.hua@hisilicon.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Running in hardIRQ, disabling IRQ is redundant since hardIRQ has disabled
IRQ. This patch removes the irqsave and irqstore to save some instruction
cycles.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Cc: Green Wan <green.wan@sifive.com>
Link: https://lore.kernel.org/r/20201027215252.25820-4-song.bao.hua@hisilicon.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Running in hardIRQ, disabling IRQ is redundant since hardIRQ has disabled
IRQ. This patch removes the irqsave and irqstore to save some instruction
cycles.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201027215252.25820-3-song.bao.hua@hisilicon.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Running in hardIRQ, disabling IRQ is redundant since hardIRQ has disabled
IRQ. This patch removes the irqsave and irqstore to save some instruction
cycles.
Signed-off-by: Barry Song <song.bao.hua@hisilicon.com>
Link: https://lore.kernel.org/r/20201027215252.25820-2-song.bao.hua@hisilicon.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Kernel 5.4 introduces HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE, devices need to
be set explicitly with this flag.
Signed-off-by: Chris Ye <lzye@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Calling release_attributes_data() while holding the "wmi_priv.mutex"
will lead to a dead lock. The other problem is that if kzalloc() fails
then this should return -ENOMEM but currently it returns success.
Fixes: e8a60aa740 ("platform/x86: Introduce support for Systems Management Driver over WMI for Dell Systems")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20201103101735.GB1127762@mwanda
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The NAVSS UDMA will stuck if target IP module is disabled by PM while PSI-L
threads are paired UDMA<->IP and no further transfers is possible. This
could be the case for IPs J721E Main CPSW (cpsw9g).
Hence, to avoid such situation do PSI-L threads pairing only when UDMA
channel is going to be enabled as at this time DMA consumer module expected
to be active already.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20201030203000.4281-1-grygorii.strashko@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
When consumer requests channel power on the DMA controller device
and otherwise on the freeing channel resources.
Note, in some cases consumer acquires channel at the ->probe() stage and
releases it at the ->remove() stage. It will mean that DMA controller device
will be powered during all this time if there is no assist from hardware
to idle it. The above mentioned cases should be investigated separately
and individually.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20201103183938.64752-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Conventionally, wake-up events for a specific device, in our case the
lid device, are managed via the ACPI _PRW field. While this does not
seem strictly necessary based on ACPI spec, the kernel disables GPE
wakeups to avoid non-wakeup interrupts preventing suspend by default and
only enables GPEs associated via the _PRW field with a wake-up capable
device. This behavior has been introduced in commit f941d3e41d ("ACPI:
EC / PM: Disable non-wakeup GPEs for suspend-to-idle") and is described
in more detail in its commit message.
Unfortunately, on MS Surface devices, there is no _PRW field present on
the lid device, thus no GPE is associated with it, and therefore the GPE
responsible for sending the status-change notification to the lid gets
disabled during suspend, making it impossible to wake the device via the
lid.
This patch introduces a pseudo-device and respective driver which, based
on some DMI matching, marks the corresponding GPE of the lid device for
wake and enables it during suspend. The behavior of this driver models
the behavior of the ACPI/PM core for normal wakeup GPEs, properly
declared via the _PRW field.
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Link: https://lore.kernel.org/r/20201028105427.1593764-1-luzmaximilian@gmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-----BEGIN PGP SIGNATURE-----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=l+RW
-----END PGP SIGNATURE-----
Merge tag 'ib-mfd-x86-v5.11' into review-hans
Immutable branch between MFD and x86 due for the v5.11 merge window
The zcrypt api provides a new function to wait until the zcrypt
api is operational:
int zcrypt_wait_api_operational(void);
The AP bus scan and the binding of ap devices to device drivers is
an asynchronous job. This function waits until these initial jobs
are done and so the zcrypt api should be ready to serve crypto
requests - if there are resources available. The function uses an
internal timeout of 60s. The very first caller will either wait for
ap bus bindings complete or the timeout happens. This state will be
remembered for further callers which will only be blocked until a
decision is made (timeout or bindings complete).
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
This patch adds notifications to userspace for two important
conditions of the ap bus:
I) Initial ap bus scan done. This indicates that the initial
scan of all the ap devices (cards, queues) is complete and
ap devices have been build up for all the hardware found.
This condition is signaled with
1) An ap bus change uevent send to userspace with an environment
key/value pair "INITSCAN=done":
# udevadm monitor -k -p
...
KERNEL[97.830919] change /devices/ap (ap)
ACTION=change
DEVPATH=/devices/ap
SUBSYSTEM=ap
INITSCAN=done
SEQNUM=10421
2) A sysfs attribute /sys/bus/ap/scans which shows the
number of completed ap bus scans done since bus init.
So a value of 1 or greater signals that the initial
ap bus scan is complete.
Note: The initial ap bus scan complete condition is fulfilled
and will be signaled even if there was no ap resource found.
II) APQN driver bindings complete. This indicates that all
APQNs have been bound to an zcrypt or alternate device
driver. Only with the help of an device driver an APQN
can be used for crypto load. So the binding complete
condition is the starting point for user space to be
sure all crypto resources on the ap bus are available
for use.
This condition is signaled with
1) An ap bus change uevent send to userspace with an environment
key/value pair "BINDINGS=complete":
# udevadm monitor -k -p
...
KERNEL[97.830975] change /devices/ap (ap)
ACTION=change
DEVPATH=/devices/ap
SUBSYSTEM=ap
BINDINGS=complete
SEQNUM=10422
2) A sysfs attribute /sys/bus/ap/bindings showing
"<nr of bound apqns>/<total nr of apqns> (complete)"
when all available apqns have been bound to device drivers, or
"<nr of bound apqns>/<total nr of apqns>"
when there are some apqns not bound to an device driver.
Note: The binding complete condition is also fulfilled, when
there are no apqns available to bind any device driver. In
this case the binding complete will be signaled AFTER init
scan is done.
Note: This condition may arise multiple times when after
initial scan modifications on the bindings take place. For
example a manual unbind of an APQN switches the binding
complete condition off. When at a later time the unbound APQNs
are bound with an device driver the binding is (again) complete
resulting in another uevent and marking the bindings sysfs
attribute with '(complete)'.
There is also a new function to be used within the kernel:
int ap_wait_init_apqn_bindings_complete(unsigned long timeout)
Interface to wait for the AP bus to have done one initial ap bus
scan and all detected APQNs have been bound to device drivers.
If these both conditions are not fulfilled, this function blocks
on a condition with wait_for_completion_interruptible_timeout().
If these both conditions are fulfilled (before the timeout hits)
the return value is 0. If the timeout (in jiffies) hits instead
-ETIME is returned. On failures negative return values are
returned to the caller. Please note that further unbind/bind
actions after initial binding complete is through do not cause this
function to block again.
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The s390-trng does provide 100% entropy. The quality value is supported
to be between 1 and 1024 and not 1..1000. Use 1024 to make this driver
the preferred one. If we ever have a better driver that has the same
quality but is faster we can change this again when merging the new
driver. No need to be conservative.
This makes sure that the hw variant is preferred over things like
virtio-rng, where the hypervisor has a potential to be misconfigured
and thus should have a slightly lower confidence.
Cc: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
And move it earlier in the decompressor.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
It is relying on _REGION1_SHIFT / _REGION2_SHIFT values which come from
asm/pgtable.h, so include it.
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Kasan early code is only working on init_mm, remove unneeded pgd
parameter from kasan_copy_shadow and rename it to
kasan_copy_shadow_mapping.
Reviewed-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
