Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Previously submitted code was taken from an incorrect branch and
was non-functional.
Cc: Oak Zeng <oak.zeng@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-By: Oak Zeng <oak.zeng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If the trap is entered due to MODE.DEBUG_EN=1 and SAVECTX is raised
concurrently the handler cannot identify the source of the exception.
This causes the debugger to lose single step exception notification
when a context save request arrives at the same time.
When MODE.DEBUG_EN=1 and STATUS.HALT=0 (exception not already handled)
jump to the second-level trap handler upon entering the trap. The
second-level trap will set STATUS.HALT=1 and return to the shader.
If SAVECTX was raised then control flow will return to the trap, which
will then handle the context save request.
Cc: Tony Tye <tony.tye@amd.com>
Cc: Laurent Morichetti <laurent.morichetti@amd.com>
Cc: Qingchuan Shi <qingchuan.shi@amd.com>
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Laurent Morichetti <laurent.morichetti@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When a wavefront raises TRAPSTS.XNACK_ERROR with STATUS.ALLOW_REPLAY=0
subsequent memory instructions have undefined behavior. In practice
SQC stores continue to work but TCP stores do not.
Context save is permitted to fail after XNACK error because the
wavefront will be halted and subsequently terminated. However the
debugger has an interest in retrieving the wavefront VGPR/LDS state.
Detect the out-of-spec case and use SQC stores during context save
in place of TCP stores.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
navi14 share same PTE format with navi10.
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: tiancyin <tianci.yin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since we are using the signed FW now, and also using PSP firmware loading,
but it's still potential to break driver when loading FW directly
instead of PSP, so we should add offset.
Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
in this patch,
drm/amd/powerplay: add callback function of get_thermal_temperature_range
the driver missed temperature granularity change on other temperature.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Drop redundant check, duplicate check, duplicate setting
and fix the return value.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Honor the 'dpm' module parameter setting on SW SMU routine as what
we did on previous ASICs. SMU FW loading is still proceeded even
with "dpm=0".
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently the allocation of config may fail and a null pointer
dereference on config can occur. Fix this by added a null
check on a failed allocation of config.
Addresses-Coverity: ("Dereference null return")
Fixes: c2cd9d04ec ("drm/amd/display: Hook up calls to do stereo mux and dig programming to stereo control interface")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.
Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
arch/x86/Makefile disables SSE and SSE2 for the whole kernel. The
AMDGPU drivers modified in this patch re-enable SSE but not SSE2. Turn
on SSE2 to support emitting double precision floating point instructions
rather than calls to non-existent (usually available from gcc_s or
compiler_rt) floating point helper routines for Clang.
This was originally landed in:
commit 1011745073 ("drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines")
but reverted in:
commit 193392ed9f ("Revert "drm/amd/display: add -msse2 to prevent Clang from emitting libcalls to undefined SW FP routines"")
due to bugreports from GCC builds. Add guards to only do so for Clang.
Link: https://bugs.freedesktop.org/show_bug.cgi?id=109487
Link: https://github.com/ClangBuiltLinux/linux/issues/327
Suggested-by: Sedat Dilek <sedat.dilek@gmail.com>
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This was missed during the addition of VegaM support
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
1. the thermal temperature is asic related data, move the code logic to
xxx_ppt.c.
2. replace data structure PP_TemperatureRange with
smu_temperature_range.
3. change temperature uint from temp*1000 to temp (temperature uint).
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Takshak said in the original submission:
With different bpf attach_flags available to attach bpf programs specially
with BPF_F_ALLOW_OVERRIDE and BPF_F_ALLOW_MULTI, the list of effective
bpf-programs available to any sub-cgroups really needs to be available for
easy debugging.
Using BPF_F_QUERY_EFFECTIVE flag, one can get the list of not only attached
bpf-programs to a cgroup but also the inherited ones from parent cgroup.
So a new option is introduced to use BPF_F_QUERY_EFFECTIVE query flag here
to list all the effective bpf-programs available for execution at a specified
cgroup.
Reused modified test program test_cgroup_attach from tools/testing/selftests/bpf:
# ./test_cgroup_attach
With old bpftool:
# bpftool cgroup show /sys/fs/cgroup/cgroup-test-work-dir/cg1/
ID AttachType AttachFlags Name
271 egress multi pkt_cntr_1
272 egress multi pkt_cntr_2
Attached new program pkt_cntr_4 in cg2 gives following:
# bpftool cgroup show /sys/fs/cgroup/cgroup-test-work-dir/cg1/cg2
ID AttachType AttachFlags Name
273 egress override pkt_cntr_4
And with new "effective" option it shows all effective programs for cg2:
# bpftool cgroup show /sys/fs/cgroup/cgroup-test-work-dir/cg1/cg2 effective
ID AttachType AttachFlags Name
273 egress override pkt_cntr_4
271 egress override pkt_cntr_1
272 egress override pkt_cntr_2
Compared to original submission use a local flag instead of global
option.
We need to clear query_flags on every command, in case batch mode
wants to use varying settings.
v2: (Takshak)
- forbid duplicated flags;
- fix cgroup path freeing.
Signed-off-by: Takshak Chahande <ctakshak@fb.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Takshak Chahande <ctakshak@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Clear buffered output once test or subtests finishes even if test was
successful. Not doing this leads to accumulation of output from previous
tests and on first failed tests lots of irrelevant output will be
dumped, greatly confusing things.
v1->v2: fix Fixes tag, add more context to patch
Fixes: 3a516a0a3a ("selftests/bpf: add sub-tests support for test_progs")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Petar Penkov says:
====================
This patch series introduces a BPF helper function that allows generating SYN
cookies from BPF. Currently, this helper is enabled at both the TC hook and the
XDP hook.
The first two patches in the series add/modify several TCP helper functions to
allow for SKB-less operation, as is the case at the XDP hook.
The third patch introduces the bpf_tcp_gen_syncookie helper function which
generates a SYN cookie for either XDP or TC programs. The return value of
this function contains both the MSS value, encoded in the cookie, and the
cookie itself.
The last three patches sync tools/ and add a test.
Performance evaluation:
I sent 10Mpps to a fixed port on a host with 2 10G bonded Mellanox 4 NICs from
random IPv6 source addresses. Without XDP I observed 7.2Mpps (syn-acks) being
sent out if the IPv6 packets carry 20 bytes of TCP options or 7.6Mpps if they
carry no options. If I attached a simple program that checks if a packet is
IPv6/TCP/SYN, looks up the socket, issues a cookie, and sends it back out after
swapping src/dest, recomputing the checksum, and setting the ACK flag, I
observed 10Mpps being sent back out.
Changes since v1:
1/ Added performance numbers to the cover letter
2/ Patch 2: Refactored a bit to fix compilation issues
3/ Patch 3: Changed ENOTSUPP to EOPNOTSUPP at Toke's suggestion
Changes since RFC:
1/ Cookie is returned in host order at Alexei's suggestion
2/ If cookies are not enabled via a sysctl, the helper function returns
-ENOENT instead of -EINVAL at Lorenz's suggestion
3/ Fixed documentation to properly reflect that MSS is 16 bits at
Lorenz's suggestion
4/ BPF helper requires TCP length to match ->doff field, rather than to simply
be no more than 20 bytes at Eric and Alexei's suggestion
5/ Packet type is looked up from the packet version field, rather than from the
socket. v4 packets are rejected on v6-only sockets but should work with
dual stack listeners at Eric's suggestion
6/ Removed unnecessary `net` argument from helper function in patch 2 at
Lorenz's suggestion
7/ Changed test to only pass MSS option so we can convince the verifier that the
memory access is not out of bounds
Note that 7/ below illustrates the verifier might need to be extended to allow
passing a variable tcph->doff to the helper function like below:
__u32 thlen = tcph->doff * 4;
if (thlen < sizeof(*tcph))
return;
__s64 cookie = bpf_tcp_gen_syncookie(sk, ipv4h, 20, tcph, thlen);
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Modify the existing bpf_tcp_check_syncookie test to also generate a
SYN cookie, pass the packet to the kernel, and verify that the two
cookies are the same (and both valid). Since cloned SKBs are skipped
during generic XDP, this test does not issue a SYN cookie when run in
XDP mode. We therefore only check that a valid SYN cookie was issued at
the TC hook.
Additionally, verify that the MSS for that SYN cookie is within
expected range.
Signed-off-by: Petar Penkov <ppenkov@google.com>
Reviewed-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Sync updated documentation for bpf_redirect_map.
Sync the bpf_tcp_gen_syncookie helper function definition with the one
in tools/uapi.
Signed-off-by: Petar Penkov <ppenkov@google.com>
Reviewed-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This helper function allows BPF programs to try to generate SYN
cookies, given a reference to a listener socket. The function works
from XDP and with an skb context since bpf_skc_lookup_tcp can lookup a
socket in both cases.
Signed-off-by: Petar Penkov <ppenkov@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch allows generation of a SYN cookie before an SKB has been
allocated, as is the case at XDP.
Signed-off-by: Petar Penkov <ppenkov@google.com>
Reviewed-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This allows us to call this function before an SKB has been
allocated.
Signed-off-by: Petar Penkov <ppenkov@google.com>
Reviewed-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This bug is from commit: 2b070ccdf8 (fixup abiv2 mmap(... O_SYNC)
failed). In that patch we remove the _PAGE_SO for memory noncache
mapping and this will cause problem when drivers use dma descriptors
to control the transcations without dma_w/rmb().
After referencing other archs' implementation, pgprot_writecombine is
introduced for mmap(... O_SYNC).
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
The mb() is the superset of dma and smp. Using bar.xxx to implement
mb() will cause problem when sync data with dma device, becasue
bar.xxx couldn't guarantee bus transactions finished at outside bus
level.
We must use sync.s instead of bar.xxx for dma data synchronization
and it will guarantee retirement after getting the bus bresponse.
Changes for V2:
- Use sync.s for all mb, rmb, wmb, dma_wmb, dma_rmb.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Change the FSI clock and data GPIOs to match what the hardware turned
out to use.
Fixes: 8e8fd0cbd7 ("ARM: dts: aspeed: Add Swift BMC machine")
Signed-off-by: Matt Spinler <spinler@us.ibm.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Adriana Kobylak <anoo@us.ibm.com>
Signed-off-by: Joel Stanley <joel@jms.id.au>
We already have tested it before. The second one should be removed.
With this change, the performance should have little improvement.
Link: http://lkml.kernel.org/r/20190730140850.7927-1-changbin.du@gmail.com
Cc: stable@vger.kernel.org
Fixes: 9cd2992f2d ("fgraph: Have set_graph_notrace only affect function_graph tracer")
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
These include guards are broken.
Match the #if !define() and #define lines so that they work correctly.
Link: http://lkml.kernel.org/r/20190720103943.16982-1-yamada.masahiro@socionext.com
Fixes: f54d186700 ("dma-buf: Rename struct fence to dma_fence")
Fixes: 2e26ca7150 ("tracing: Fix tracepoint.h DECLARE_TRACE() to allow more than one header")
Fixes: e543002f77 ("qdisc: add tracepoint qdisc:qdisc_dequeue for dequeued SKBs")
Fixes: 95f295f9fe ("dmaengine: tegra: add tracepoints to driver")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
[cw00.choi: Edit patch title and description for readability]
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Pull dax fix from Dan Williams:
"Fix a botched manual patch update that got dropped between testing and
application"
* 'dax-fix-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
dax: Fix missed wakeup in put_unlocked_entry()
The API, which belongs to GPIO library, is foreign to ACPI headers. Earlier
we moved out I²C out of the latter, and now it's time for
acpi_dev_add_driver_gpios() et al.
For time being the acpi_gpio_get_irq_resource() and acpi_dev_gpio_irq_get()
are left untouched as they need more thought about.
Note, it requires uninline acpi_dev_remove_driver_gpios() to keep purity of
consumer.h.
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Cc: Jie Yang <yang.jie@linux.intel.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org (moderated list:INTEL ASoC DRIVERS)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190730104337.21235-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If a device doesn't support DAX its 'dax_dev' is NULL. Fix
device_synchronous() to first check if dax_dev is NULL before
dereferencing it.
Fixes: 2e9ee0955d ("dm: enable synchronous dax")
Reported-by: jencce.kernel@gmail.com
Signed-off-by: Pankaj Gupta <pagupta@redhat.com>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This is a follow up to the commit
f626d6dfb7 ("gpio: of: Break out OF-only code")
which broke down OF parts of GPIO library. Here we do the similar to ACPI.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190730104337.21235-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Kernel build bot reported a compilation error after the commit
f626d6dfb7 ("gpio: of: Break out OF-only code"):
drivers/gpio/gpiolib-devres.o: In function `devm_gpiod_get_from_of_node':
gpiolib-devres.c:(.text+0x19a): undefined reference to `gpiod_get_from_of_node'
This happens due to move the latter under umbrella of CONFIG_OF_GPIO while
customer.h contains staled data.
Fix it by reshuffling contents of consumer.h to satisfy build dependencies.
Reported-by: kbuild test robot <lkp@intel.com>
Fixes: f626d6dfb7 ("gpio: of: Break out OF-only code"):
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190730104337.21235-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Move the code that negotiates with the host to a new function
balloon_connect_vsp() and improve the error handling.
This makes the code more readable and paves the way for the
support of hibernation in future.
Makes no real logic change here.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
It's unnecessary to dynamically allocate the buffer.
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Marek Vasut says:
====================
net: dsa: ksz: Add Microchip KSZ87xx support
This series adds support for Microchip KSZ87xx switches, which are
slightly simpler compared to KSZ9xxx .
====================
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add Microchip KSZ8795 DSA driver.
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add DSA tag code for Microchip KSZ8795 switch. The switch is simpler
and the tag is only 1 byte, instead of 2 as is the case with KSZ9477.
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Document Microchip KSZ87xx family switches. These include
KSZ8765 - 5 port switch
KSZ8794 - 4 port switch
KSZ8795 - 5 port switch
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Woojung Huh <woojung.huh@microchip.com>
Cc: devicetree@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
The generic VDSO implementation uses the Y2038 safe clock_gettime64() and
clock_getres_time64() syscalls as fallback for 32bit VDSO. This breaks
seccomp setups because these syscalls might be not (yet) allowed.
Implement the 32bit variants which use the legacy syscalls and select the
variant in the core library.
The 64bit time variants are not removed because they are required for the
time64 based vdso accessors.
Fixes: 00b26474c2 ("lib/vdso: Provide generic VDSO implementation")
Reported-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lkml.kernel.org/r/20190728131648.971361611@linutronix.de
The generic VDSO implementation uses the Y2038 safe clock_gettime64() and
clock_getres_time64() syscalls as fallback for 32bit VDSO. This breaks
seccomp setups because these syscalls might be not (yet) allowed.
Implement the 32bit variants which use the legacy syscalls and select the
variant in the core library.
The 64bit time variants are not removed because they are required for the
time64 based vdso accessors.
Fixes: 7ac8707479 ("x86/vdso: Switch to generic vDSO implementation")
Reported-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20190728131648.879156507@linutronix.de
To address the regression which causes seccomp to deny applications the
access to clock_gettime64() and clock_getres64() syscalls because they
are not enabled in the existing filters.
That trips over the fact that 32bit VDSOs use the new clock_gettime64() and
clock_getres64() syscalls in the fallback path.
Add a conditional to invoke the 32bit legacy fallback syscalls instead of
the new 64bit variants. The conditional can go away once all architectures
are converted.
Fixes: 00b26474c2 ("lib/vdso: Provide generic VDSO implementation")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sean Christopherson <sean.j.christopherson@intel.com>
Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907301134470.1738@nanos.tec.linutronix.de
To allow syscall fallbacks using the legacy 32bit syscall for 32bit VDSO
builds, move the fallback invocation out into the callers.
Split the common code out of __cvdso_clock_gettime/getres() and invoke the
syscall fallback in the 64bit and 32bit variants.
Preparatory work for using legacy syscalls in 32bit VDSO. No functional
change.
Fixes: 00b26474c2 ("lib/vdso: Provide generic VDSO implementation")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lkml.kernel.org/r/20190728131648.695579736@linutronix.de
The 32bit variants of vdso_clock_gettime()/getres() have a NULL pointer
check for the timespec pointer. That's inconsistent vs. 64bit.
But the vdso implementation will never be consistent versus the syscall
because the only case which it can handle is NULL. Any other invalid
pointer will cause a segfault. So special casing NULL is not really useful.
Remove it along with the superflouos syscall fallback invocation as that
will return -EFAULT anyway. That also gets rid of the dubious typecast
which only works because the pointer is NULL.
Fixes: 00b26474c2 ("lib/vdso: Provide generic VDSO implementation")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20190728131648.587523358@linutronix.de
Set phy device advertising to enable MAC flow control.
Signed-off-by: Xiaofei Shen <xiaofeis@codeaurora.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefano Garzarella says:
====================
vsock/virtio: optimizations to increase the throughput
This series tries to increase the throughput of virtio-vsock with slight
changes.
While I was testing the v2 of this series I discovered an huge use of memory,
so I added patch 1 to mitigate this issue. I put it in this series in order
to better track the performance trends.
v5:
- rebased all patches on net-next
- added Stefan's R-b and Michael's A-b
v4: https://patchwork.kernel.org/cover/11047717
v3: https://patchwork.kernel.org/cover/10970145
v2: https://patchwork.kernel.org/cover/10938743
v1: https://patchwork.kernel.org/cover/10885431
Below are the benchmarks step by step. I used iperf3 [1] modified with VSOCK
support. As Michael suggested in the v1, I booted host and guest with 'nosmap'.
A brief description of patches:
- Patches 1: limit the memory usage with an extra copy for small packets
- Patches 2+3: reduce the number of credit update messages sent to the
transmitter
- Patches 4+5: allow the host to split packets on multiple buffers and use
VIRTIO_VSOCK_MAX_PKT_BUF_SIZE as the max packet size allowed
host -> guest [Gbps]
pkt_size before opt p 1 p 2+3 p 4+5
32 0.032 0.030 0.048 0.051
64 0.061 0.059 0.108 0.117
128 0.122 0.112 0.227 0.234
256 0.244 0.241 0.418 0.415
512 0.459 0.466 0.847 0.865
1K 0.927 0.919 1.657 1.641
2K 1.884 1.813 3.262 3.269
4K 3.378 3.326 6.044 6.195
8K 5.637 5.676 10.141 11.287
16K 8.250 8.402 15.976 16.736
32K 13.327 13.204 19.013 20.515
64K 21.241 21.341 20.973 21.879
128K 21.851 22.354 21.816 23.203
256K 21.408 21.693 21.846 24.088
512K 21.600 21.899 21.921 24.106
guest -> host [Gbps]
pkt_size before opt p 1 p 2+3 p 4+5
32 0.045 0.046 0.057 0.057
64 0.089 0.091 0.103 0.104
128 0.170 0.179 0.192 0.200
256 0.364 0.351 0.361 0.379
512 0.709 0.699 0.731 0.790
1K 1.399 1.407 1.395 1.427
2K 2.670 2.684 2.745 2.835
4K 5.171 5.199 5.305 5.451
8K 8.442 8.500 10.083 9.941
16K 12.305 12.259 13.519 15.385
32K 11.418 11.150 11.988 24.680
64K 10.778 10.659 11.589 35.273
128K 10.421 10.339 10.939 40.338
256K 10.300 9.719 10.508 36.562
512K 9.833 9.808 10.612 35.979
As Stefan suggested in the v1, I measured also the efficiency in this way:
efficiency = Mbps / (%CPU_Host + %CPU_Guest)
The '%CPU_Guest' is taken inside the VM. I know that it is not the best way,
but it's provided for free from iperf3 and could be an indication.
host -> guest efficiency [Mbps / (%CPU_Host + %CPU_Guest)]
pkt_size before opt p 1 p 2+3 p 4+5
32 0.35 0.45 0.79 1.02
64 0.56 0.80 1.41 1.54
128 1.11 1.52 3.03 3.12
256 2.20 2.16 5.44 5.58
512 4.17 4.18 10.96 11.46
1K 8.30 8.26 20.99 20.89
2K 16.82 16.31 39.76 39.73
4K 30.89 30.79 74.07 75.73
8K 53.74 54.49 124.24 148.91
16K 80.68 83.63 200.21 232.79
32K 132.27 132.52 260.81 357.07
64K 229.82 230.40 300.19 444.18
128K 332.60 329.78 331.51 492.28
256K 331.06 337.22 339.59 511.59
512K 335.58 328.50 331.56 504.56
guest -> host efficiency [Mbps / (%CPU_Host + %CPU_Guest)]
pkt_size before opt p 1 p 2+3 p 4+5
32 0.43 0.43 0.53 0.56
64 0.85 0.86 1.04 1.10
128 1.63 1.71 2.07 2.13
256 3.48 3.35 4.02 4.22
512 6.80 6.67 7.97 8.63
1K 13.32 13.31 15.72 15.94
2K 25.79 25.92 30.84 30.98
4K 50.37 50.48 58.79 59.69
8K 95.90 96.15 107.04 110.33
16K 145.80 145.43 143.97 174.70
32K 147.06 144.74 146.02 282.48
64K 145.25 143.99 141.62 406.40
128K 149.34 146.96 147.49 489.34
256K 156.35 149.81 152.21 536.37
512K 151.65 150.74 151.52 519.93
[1] https://github.com/stefano-garzarella/iperf/
====================
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>