Commit graph

982,081 commits

Author SHA1 Message Date
Stefano Garzarella
0038ff357f vsock/virtio: change the maximum packet size allowed
Since now we are able to split packets, we can avoid limiting
their sizes to VIRTIO_VSOCK_DEFAULT_RX_BUF_SIZE.
Instead, we can use VIRTIO_VSOCK_MAX_PKT_BUF_SIZE as the max
packet size.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 15:00:00 -07:00
Stefano Garzarella
6dbd3e66e7 vhost/vsock: split packets to send using multiple buffers
If the packets to sent to the guest are bigger than the buffer
available, we can split them, using multiple buffers and fixing
the length in the packet header.
This is safe since virtio-vsock supports only stream sockets.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 15:00:00 -07:00
Stefano Garzarella
9632e9f61b vsock/virtio: fix locking in virtio_transport_inc_tx_pkt()
fwd_cnt and last_fwd_cnt are protected by rx_lock, so we should use
the same spinlock also if we are in the TX path.

Move also buf_alloc under the same lock.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 15:00:00 -07:00
Stefano Garzarella
b89d882dc9 vsock/virtio: reduce credit update messages
In order to reduce the number of credit update messages,
we send them only when the space available seen by the
transmitter is less than VIRTIO_VSOCK_MAX_PKT_BUF_SIZE.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 15:00:00 -07:00
Stefano Garzarella
473c7391ce vsock/virtio: limit the memory used per-socket
Since virtio-vsock was introduced, the buffers filled by the host
and pushed to the guest using the vring, are directly queued in
a per-socket list. These buffers are preallocated by the guest
with a fixed size (4 KB).

The maximum amount of memory used by each socket should be
controlled by the credit mechanism.
The default credit available per-socket is 256 KB, but if we use
only 1 byte per packet, the guest can queue up to 262144 of 4 KB
buffers, using up to 1 GB of memory per-socket. In addition, the
guest will continue to fill the vring with new 4 KB free buffers
to avoid starvation of other sockets.

This patch mitigates this issue copying the payload of small
packets (< 128 bytes) into the buffer of last packet queued, in
order to avoid wasting memory.

Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 15:00:00 -07:00
Thomas Gleixner
b744948725 hrtimer: Remove task argument from hrtimer_init_sleeper()
All callers hand in 'current' and that's the only task pointer which
actually makes sense. Remove the task argument and set current in the
function.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190726185752.791885290@linutronix.de
2019-07-30 23:57:51 +02:00
Joe Lawrence
fbb01c5247 selftests/livepatch: push and pop dynamic debug config
The livepatching self-tests tweak the dynamic debug config to verify
the kernel log during the tests.  Enhance set_dynamic_debug() so that
the config changes are restored when the script exits.

Note this functionality needs to keep in sync with:
  - dynamic_debug input/output formatting
  - functions affected by set_dynamic_debug()

  For example, push_dynamic_debug() transforms:
    kernel/livepatch/transition.c:530 [livepatch]klp_init_transition =_ "'%s': initializing %s transition\012"
  to the following:
    file kernel/livepatch/transition.c line 530 =_

Signed-off-by: Joe Lawrence <joe.lawrence@redhat.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-07-30 15:47:10 -06:00
Aleksa Sarai
fc2e634e99 kselftest: save-and-restore errno to allow for %m formatting
Previously, using "%m" in a ksft_* format string can result in strange
output because the errno value wasn't saved before calling other libc
functions. The solution is to simply save and restore the errno before
we format the user-supplied format string.

Signed-off-by: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2019-07-30 15:46:48 -06:00
Arnd Bergmann
055d88242a compat_ioctl: pppoe: fix PPPOEIOCSFWD handling
Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in
linux-2.5.69 along with hundreds of other commands, but was always broken
sincen only the structure is compatible, but the command number is not,
due to the size being sizeof(size_t), or at first sizeof(sizeof((struct
sockaddr_pppox)), which is different on 64-bit architectures.

Guillaume Nault adds:

  And the implementation was broken until 2016 (see 29e73269aa ("pppoe:
  fix reference counting in PPPoE proxy")), and nobody ever noticed. I
  should probably have removed this ioctl entirely instead of fixing it.
  Clearly, it has never been used.

Fix it by adding a compat_ioctl handler for all pppoe variants that
translates the command number and then calls the regular ioctl function.

All other ioctl commands handled by pppoe are compatible between 32-bit
and 64-bit, and require compat_ptr() conversion.

This should apply to all stable kernels.

Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 14:42:13 -07:00
Jon Maloy
2948a1fcd7 tipc: fix unitilized skb list crash
Our test suite somtimes provokes the following crash:

Description of problem:
[ 1092.597234] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8
[ 1092.605072] PGD 0 P4D 0
[ 1092.607620] Oops: 0000 [#1] SMP PTI
[ 1092.611118] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Not tainted 4.18.0-122.el8.x86_64 #1
[ 1092.619724] Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 1.3.7 02/08/2018
[ 1092.627215] RIP: 0010:tipc_mcast_filter_msg+0x93/0x2d0 [tipc]
[ 1092.632955] Code: 0f 84 aa 01 00 00 89 cf 4d 01 ca 4c 8b 26 c1 ef 19 83 e7 0f 83 ff 0c 4d 0f 45 d1 41 8b 6a 10 0f cd 4c 39 e6 0f 84 81 01 00 00 <4d> 8b 9c 24 e8 00 00 00 45 8b 13 41 0f ca 44 89 d7 c1 ef 13 83 e7
[ 1092.651703] RSP: 0018:ffff929e5fa83a18 EFLAGS: 00010282
[ 1092.656927] RAX: ffff929e3fb38100 RBX: 00000000069f29ee RCX: 00000000416c0045
[ 1092.664058] RDX: ffff929e5fa83a88 RSI: ffff929e31a28420 RDI: 0000000000000000
[ 1092.671209] RBP: 0000000029b11821 R08: 0000000000000000 R09: ffff929e39b4407a
[ 1092.678343] R10: ffff929e39b4407a R11: 0000000000000007 R12: 0000000000000000
[ 1092.685475] R13: 0000000000000001 R14: ffff929e3fb38100 R15: ffff929e39b4407a
[ 1092.692614] FS:  0000000000000000(0000) GS:ffff929e5fa80000(0000) knlGS:0000000000000000
[ 1092.700702] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1092.706447] CR2: 00000000000000e8 CR3: 000000031300a004 CR4: 00000000007606e0
[ 1092.713579] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1092.720712] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1092.727843] PKRU: 55555554
[ 1092.730556] Call Trace:
[ 1092.733010]  <IRQ>
[ 1092.735034]  tipc_sk_filter_rcv+0x7ca/0xb80 [tipc]
[ 1092.739828]  ? __kmalloc_node_track_caller+0x1cb/0x290
[ 1092.744974]  ? dev_hard_start_xmit+0xa5/0x210
[ 1092.749332]  tipc_sk_rcv+0x389/0x640 [tipc]
[ 1092.753519]  tipc_sk_mcast_rcv+0x23c/0x3a0 [tipc]
[ 1092.758224]  tipc_rcv+0x57a/0xf20 [tipc]
[ 1092.762154]  ? ktime_get_real_ts64+0x40/0xe0
[ 1092.766432]  ? tpacket_rcv+0x50/0x9f0
[ 1092.770098]  tipc_l2_rcv_msg+0x4a/0x70 [tipc]
[ 1092.774452]  __netif_receive_skb_core+0xb62/0xbd0
[ 1092.779164]  ? enqueue_entity+0xf6/0x630
[ 1092.783084]  ? kmem_cache_alloc+0x158/0x1c0
[ 1092.787272]  ? __build_skb+0x25/0xd0
[ 1092.790849]  netif_receive_skb_internal+0x42/0xf0
[ 1092.795557]  napi_gro_receive+0xba/0xe0
[ 1092.799417]  mlx5e_handle_rx_cqe+0x83/0xd0 [mlx5_core]
[ 1092.804564]  mlx5e_poll_rx_cq+0xd5/0x920 [mlx5_core]
[ 1092.809536]  mlx5e_napi_poll+0xb2/0xce0 [mlx5_core]
[ 1092.814415]  ? __wake_up_common_lock+0x89/0xc0
[ 1092.818861]  net_rx_action+0x149/0x3b0
[ 1092.822616]  __do_softirq+0xe3/0x30a
[ 1092.826193]  irq_exit+0x100/0x110
[ 1092.829512]  do_IRQ+0x85/0xd0
[ 1092.832483]  common_interrupt+0xf/0xf
[ 1092.836147]  </IRQ>
[ 1092.838255] RIP: 0010:cpuidle_enter_state+0xb7/0x2a0
[ 1092.843221] Code: e8 3e 79 a5 ff 80 7c 24 03 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 d7 01 00 00 31 ff e8 a0 6b ab ff fb 66 0f 1f 44 00 00 <48> b8 ff ff ff ff f3 01 00 00 4c 29 f3 ba ff ff ff 7f 48 39 c3 7f
[ 1092.861967] RSP: 0018:ffffaa5ec6533e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd
[ 1092.869530] RAX: ffff929e5faa3100 RBX: 000000fe63dd2092 RCX: 000000000000001f
[ 1092.876665] RDX: 000000fe63dd2092 RSI: 000000003a518aaa RDI: 0000000000000000
[ 1092.883795] RBP: 0000000000000003 R08: 0000000000000004 R09: 0000000000022940
[ 1092.890929] R10: 0000040cb0666b56 R11: ffff929e5faa20a8 R12: ffff929e5faade78
[ 1092.898060] R13: ffffffffb59258f8 R14: 000000fe60f3228d R15: 0000000000000000
[ 1092.905196]  ? cpuidle_enter_state+0x92/0x2a0
[ 1092.909555]  do_idle+0x236/0x280
[ 1092.912785]  cpu_startup_entry+0x6f/0x80
[ 1092.916715]  start_secondary+0x1a7/0x200
[ 1092.920642]  secondary_startup_64+0xb7/0xc0
[...]

The reason is that the skb list tipc_socket::mc_method.deferredq only
is initialized for connectionless sockets, while nothing stops arriving
multicast messages from being filtered by connection oriented sockets,
with subsequent access to the said list.

We fix this by initializing the list unconditionally at socket creation.
This eliminates the crash, while the message still is dropped further
down in tipc_sk_filter_rcv() as it should be.

Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 14:39:36 -07:00
Stephen Boyd
d1a55841ab net: Remove dev_err() usage after platform_get_irq()
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Cc: Felix Fietkau <nbd@nbd.name>
Cc: Lorenzo Bianconi <lorenzo@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 14:37:35 -07:00
David S. Miller
2d73a6c38d Merge branch 'Finish-conversion-of-skb_frag_t-to-bio_vec'
Jonathan Lemon says:

====================
Finish conversion of skb_frag_t to bio_vec

The recent conversion of skb_frag_t to bio_vec did not include
skb_frag's page_offset.  Add accessor functions for this field,
utilize them, and remove the union, restoring the original structure.

v2:
  - rename accessors
  - follow kdoc conventions
====================

Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 14:21:32 -07:00
Jonathan Lemon
65c84f148e linux: Remove bvec page_offset, use bv_offset
Now that page_offset is referenced through accessors, remove
the union, and use bv_offset.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 14:21:32 -07:00
Jonathan Lemon
b54c9d5bd6 net: Use skb_frag_off accessors
Use accessor functions for skb fragment's page_offset instead
of direct references, in preparation for bvec conversion.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 14:21:32 -07:00
Jonathan Lemon
7240b60c98 linux: Add skb_frag_t page_offset accessors
Add skb_frag_off(), skb_frag_off_add(), skb_frag_off_set(),
and skb_frag_off_copy() accessors for page_offset.

Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 14:21:31 -07:00
David S. Miller
6ca04afbf9 Merge branch 'sctp-clean-up-sctp_connect-function'
Xin Long says:

====================
sctp: clean up __sctp_connect function

This patchset is to factor out some common code for
sctp_sendmsg_new_asoc() and __sctp_connect() into 2
new functioins.

v1->v2:
  - add the patch 1/5 to avoid a slab-out-of-bounds warning.
  - add some code comment for the check change in patch 2/5.
  - remove unused 'addrcnt' as Marcelo noticed in patch 3/5.
====================

Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 14:18:14 -07:00
Xin Long
a64e59c72c sctp: factor out sctp_connect_add_peer
In this function factored out from sctp_sendmsg_new_asoc() and
__sctp_connect(), it adds a peer with the other addr into the
asoc after this asoc is created with the 1st addr.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 14:18:14 -07:00
Xin Long
f26f995122 sctp: factor out sctp_connect_new_asoc
In this function factored out from sctp_sendmsg_new_asoc() and
__sctp_connect(), it creates the asoc and adds a peer with the
1st addr.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 14:18:14 -07:00
Xin Long
dd8378b3af sctp: clean up __sctp_connect
__sctp_connect is doing quit similar things as sctp_sendmsg_new_asoc.
To factor out common functions, this patch is to clean up their code
to make them look more similar:

  1. create the asoc and add a peer with the 1st addr.
  2. add peers with the other addrs into this asoc one by one.

while at it, also remove the unused 'addrcnt'.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 14:18:14 -07:00
Xin Long
f40f1177c3 sctp: check addr_size with sa_family_t size in __sctp_setsockopt_connectx
Now __sctp_connect() is called by __sctp_setsockopt_connectx() and
sctp_inet_connect(), the latter has done addr_size check with size
of sa_family_t.

In the next patch to clean up __sctp_connect(), we will remove
addr_size check with size of sa_family_t from __sctp_connect()
for the 1st address.

So before doing that, __sctp_setsockopt_connectx() should do
this check first, as sctp_inet_connect() does.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 14:18:14 -07:00
Xin Long
4c31bc6b1e sctp: only copy the available addr data in sctp_transport_init
'addr' passed to sctp_transport_init is not always a whole size
of union sctp_addr, like the path:

  sctp_sendmsg() ->
  sctp_sendmsg_new_asoc() ->
  sctp_assoc_add_peer() ->
  sctp_transport_new() -> sctp_transport_init()

In the next patches, we will also pass the address length of data
only to sctp_assoc_add_peer().

So sctp_transport_init() should copy the only available data from
addr to peer->ipaddr, instead of 'peer->ipaddr = *addr' which may
cause slab-out-of-bounds.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-30 14:18:14 -07:00
Lucas De Marchi
2e8de0879c drm/i915: make i915_selftest.h self-contained
Fix build breakage:

In file included from <command-line>:
./drivers/gpu/drm/i915/i915_selftest.h:125:1: error: unknown type name ‘bool’
  125 | bool __igt_timeout(unsigned long timeout, const char *fmt, ...);
      | ^~~~

Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190730181759.26162-1-lucas.demarchi@intel.com
2019-07-30 13:41:35 -07:00
Stephen Boyd
c1030cd456 HSI: Remove dev_err() usage after platform_get_irq()
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Cc: Sebastian Reichel <sre@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-07-30 22:40:03 +02:00
Jacek Anaszewski
be7fc2cc86 Generic Device Lookup Helpers
Persistent tag for others to pull this branch from
 
 Based on patch series from Suzuki K Poulose <suzuki.poulose@arm.com>
 with Subject: [PATCH v3 0/7] drivers: Add generic device lookup helpers
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEZH8oZUiU471FcZm+ONu9yGCSaT4FAl1AL7obHGdyZWdraEBs
 aW51eGZvdW5kYXRpb24ub3JnAAoJEDjbvchgkmk+X9cP/jXGxNeD4Hv2KfpQb32E
 Zl7bnblRwKaheD1s91WzfV8HFgLcylmu2chW/IGpgX7ujHRr5zIu/H8FApK+Z5F+
 8LiF8HnW2GICcSf95VMLNBXFY3wZq7NzOVnLIPvVcLJdOPPEjfYafQwSxB4WYxW5
 UK4JVsLg8SpAOdqA5bGhlOHWaTssLRsktA0VEh4w0uUOxPeel7gh16GRK8GLlKTq
 8lHiIKaN7PL9eDFTjh1wYP6FFgEAQhKexYVDtVj3fcEf8M0ArJTPIuPgaCKUqmD/
 J233RyFAuMtR8N1jY4ScPlnUyHJzNmM1wF77PRupwIAO0opRjTJ2BNI7GwC1hB2J
 xiPWtHrD21MBh2g44v+b/OwFNJ5AvuIlWEdEnrpNyj2KzrZP9H8G8Fy6CjFdVsEU
 HzccNdkfZ0Y2juJjE/HvpPe3t3NjncUgeuFALzgjYrmm/1KVGL16HH2YFvtGZI5P
 wrJVjyjdkRVU2u5I5+lIHRfULSmQIEPvp2BfkHnsmDmLNQbL8eTYCuowpSdbWWYB
 yFxoavHuga7uDW3MPMr6c62csaUXMyeb1y9gCKnUqhg9lxkbGujFsUBVviFKJTvH
 bWt79T2hqShe22JvwoIMSnH0DGpmFxFfdXk5/D7dGJJ5KUFoQ7bI0Q4wB9wW5+C4
 uNqNTLD+o6uyIXD3wwRy/kkN
 =XFYe
 -----END PGP SIGNATURE-----

Merge tag 'generic_lookup_helpers' into for-next

Generic Device Lookup Helpers

Persistent tag for others to pull this branch from

Based on patch series from Suzuki K Poulose <suzuki.poulose@arm.com>
with Subject: [PATCH v3 0/7] drivers: Add generic device lookup helpers

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

* tag 'generic_lookup_helpers':
  platform: Add platform_find_device_by_driver() helper
  drivers: Add generic helper to match any device
  drivers: Introduce device lookup variants by ACPI_COMPANION device
  drivers: Introduce device lookup variants by device type
  drivers: Introduce device lookup variants by fwnode
  drivers: Introduce device lookup variants by of_node
  drivers: Introduce device lookup variants by name
2019-07-30 22:36:31 +02:00
Linus Torvalds
629f8205a6 for-linus-20190730
-----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCXUCO6AAKCRCRxhvAZXjc
 ojpPAP9w0DAQbItLqcgdsad3fbHibUs5Ix7TUy0qIRgan2QF2AEAzWmo2DVGvRk3
 yI+NnzVXX63iUqv5hBtCNy68TUWyXgc=
 =WSnj
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-20190730' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux

Pull pidfd fixes from Christian Brauner:
 "This makes setting the exit_state in exit_notify() consistent after
  fixing the pidfd polling race pre-rc1. Related to the race fix, this
  adds a WARN_ON() to do_notify_pidfd() to catch any future exit_state
  races.

  Last, this removes an obsolete comment from the pidfd tests"

* tag 'for-linus-20190730' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  exit: make setting exit_state consistent
  pidfd: Add warning if exit_state is 0 during notification
  pidfd: remove obsolete comments from test
2019-07-30 13:25:14 -07:00
Andy Shevchenko
c6e0396124 coda: Fix typo in the struct CodaCred documentation
Documentation mistakenly refers to a different type while explaining
the contents of the struct CodaCred.

Fix the typo in the struct CodaCred description in the documentation.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-07-30 14:19:41 -06:00
Sheriff Esseson
38a449ff53 Documentation: filesystem: fix "Removed Sysctls" table
the "Removed Sysctls" section is a table - bring it alive with ReST.

Signed-off-by: Sheriff Esseson <sheriffesseson@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-07-30 14:18:43 -06:00
Mark Rutland
da422ade5c Documentation/features/locking: update lists
The locking feature lists don't match reality as of v5.3-rc1:

* arm64 moved to queued spinlocks in commit:
  c11090474d
  ("arm64: locking: Replace ticket lock implementation with qspinlock")

* xtensa moved to queued spinlocks and rwlocks in commit:
  579afe866f
  ("xtensa: use generic spinlock/rwlock implementation")

* architecture-specific rwsem support was removed in commit:
  46ad0840b1
  ("locking/rwsem: Remove arch specific rwsem files")

So update the feature lists accordingly, and remove the now redundant
rwsem-optimized list.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-07-30 14:18:43 -06:00
Linus Torvalds
0572d7668a f2fs-for-5.4-rc3
This set of patches adjust to follow recent setflags changes and fix two
 regression introduced since 5.4-rc1.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE00UqedjCtOrGVvQiQBSofoJIUNIFAl1AgaYACgkQQBSofoJI
 UNJzPA/+NXLuNcjdP2HdiTj2fZc5saFDZkMKmjd6559rsQI9799qGIqZbhoynV15
 sWNToo04LL1nNSTj/+/Kemwx3jnKUst4HCeUodb88Fey/phzbX4Di59aOv9cb5nT
 g1Fozf7pt4TI67/zOxrP32s5hAUe1c7kkdp4XC8lK4Sv7KqXxvw6dz7QOWCaWd/z
 DfEww1miNL0zRKSHUxj+74nLU6Q3Ot9/lEg4Af+8hJfURuCtkqck3yUXuyYnPmA0
 4E15IeayqUEwqLHsGb3ysWsTQz1gRPRJncMz9FHsaW2pPIGiQtvJMzlhmo8vdrnP
 8vRXGL9U/kuzod/MR0nOl16Wmq4u75IbK4FGEHF032An0bzYspwej5GDWbD7fiIW
 gjGF6MoSmtYdngSxED2Cf81MM5oCKGMMxkMc9C+NFIMR9UNtagTMjzLtEICP/Q0h
 7u6A5vqbND7Oh8O2b+Xk4kvVtJ2Czu0Jq7p6kdfCPTXV3oJR9Wq7fdXyGBtm6AWx
 sjbt6d0RvuR8G+4jPI8Wa8gZ9cPJIQW+Iw917Q/mDqCfK7mXarrpy8tsNzNduLzl
 80XjIA1BknNPFOHKPndSAhkXrpb269nPVfdtPTv0GAris3DANG71tKMp9pijFOo0
 rn6SKzVVmYo41FWgYpQc2b5V8uQZXK/LMY4TF6bgRHAfmPPgOxk=
 =TSfD
 -----END PGP SIGNATURE-----

Merge tag 'f2fs-for-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs

Pull f2fs fixes from Jaegeuk Kim:
 "This set of patches adjust to follow recent setflags changes and fix
  two regressions"

* tag 'f2fs-for-5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs:
  f2fs: use EINVAL for superblock with invalid magic
  f2fs: fix to read source block before invalidating it
  f2fs: remove redundant check from f2fs_setflags_common()
  f2fs: use generic checking function for FS_IOC_FSSETXATTR
  f2fs: use generic checking and prep function for FS_IOC_SETFLAGS
2019-07-30 13:15:39 -07:00
Quinn Tran
7f4374e67b scsi: qla2xxx: Reject EH_{abort|device_reset|target_request}
Reject eh_{abort|device_reset|target_reset} when rport is being torn down
or chip is down.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30 16:12:02 -04:00
Quinn Tran
5e5402c147 scsi: qla2xxx: Skip FW dump on LOOP initialization error
Firmware dump captured during LOOP Init error does not yield any
significant information.  This patch removes call to trigger firmware dump
collection during Loop Initialization.

Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30 16:12:02 -04:00
Quinn Tran
178235f43e scsi: qla2xxx: Use Correct index for Q-Pair array
For target mode, the default number of Q-Pairs allowed to use is 2. If the
number of Q-Pairs allocated is lower than the default Q-Pairs, then lower
value should be the set as default.

[mkp: typo]

Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30 16:12:02 -04:00
Quinn Tran
0c6df59061 scsi: qla2xxx: Fix abort timeout race condition.
If an abort times out, the Abort IOCB completion and Abort timer can race
against each other. This patch provides unique error code for timer path to
allow proper cleanup.

[mkp: typo]

Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30 16:12:02 -04:00
Quinn Tran
d376dbda18 scsi: qla2xxx: Fix different size DMA Alloc/Unmap
[   17.177276] qla2xxx 0000:05:00.0: DMA-API: device driver frees DMA memory
    with different size [device address=0x00000006198b0000] [map size=32784 bytes]
    [unmap size=8208 bytes]
[   17.177390] RIP: 0010:check_unmap+0x7a2/0x1750
[   17.177425] Call Trace:
[   17.177438]  debug_dma_free_coherent+0x1b5/0x2d5
[   17.177470]  dma_free_attrs+0x7f/0x140
[   17.177489]  qla24xx_sp_unmap+0x1e2/0x610 [qla2xxx]
[   17.177509]  qla24xx_async_gnnft_done+0x9c6/0x17d0 [qla2xxx]
[   17.177535]  qla2x00_do_work+0x514/0x2200 [qla2xxx]

Fixes: b5f3bc39a0 ("scsi: qla2xxx: Fix inconsistent DMA mem alloc/free")
Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30 16:12:01 -04:00
Himanshu Madhani
5d328de64d scsi: qla2xxx: Fix DMA unmap leak
With debug kernel we see following wanings indicating memory leak.

[28809.523959] WARNING: CPU: 3 PID: 6790 at lib/dma-debug.c:978
dma_debug_device_change+0x166/0x1d0
[28809.523964] pci 0000:0c:00.6: DMA-API: device driver has pending DMA
allocations while released from device [count=5]
[28809.523964] One of leaked entries details: [device
address=0x00000002aefe4000] [size=8208 bytes] [mapped with DMA_BIDIRECTIONAL]
[mapped as coherent]

Fix this by unmapping DMA memory.

Signed-off-by: Quinn Tran <qutran@marvell.com>
Signed-off-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30 16:12:01 -04:00
Linus Torvalds
2f6f0a9962 linux-kselftest-5.3-rc3
This Kselftest update for Linux 5.3-rc3 consists of minor fixes to
 tests and one major fix to livepatch test to add skip handling to
 avoid false fail reports when livepatch is disabled.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAl1AXTUACgkQCwJExA0N
 QxzLWg//TWTTBZ1HIurq/Ftq+S1kZjF5VYoWxvkF7NCq166Nz4XTqO4EpmhYLb5P
 az5YwfbHRC/HGCdJv+0k/q06IGkfxuaY13PTQKstDpbd2Z/icXJJbOmT9MRv6kFt
 Ul6TFyyqEjv9I1JER8Stho4a1nH2G9nP0AMyQnSeZjtsrazvw4csyc2RPcKuihZb
 93vhG7QbgZBxHGXNG5yWIXfVXD2LD7ZFB26XCIfK3Mmin4wLspecivq1G86cHtQh
 MJ/1reXJ5cMo/IDLy7E4tHQq9r8v6LQgHkmExpED8JcETgq9Qb8G+f7T5z8C00bs
 kc5XOAAq38tFBFiysHZ+lTLNPj5uMaaquq0O2Bwf2+4wo04KdKrYJ8GPswC19gp+
 bYU2dotGoenCtocgeeMRNFXAxGTgySdMbRmrVVvzSO6MpsuBgjAyDUiLQ1mXNmkd
 ZCTUHC7UMn6VfrRVfHkLw6p04ZB8hs+MJ22Ytcq5Gy2qYXmtQALa3ih23r4SfAQt
 lHDh0ImlISc5t9cqyPQPBvt3CknT0hvxG2iJaSVo/74BslDRx2JjB8tUXV0Mgfj2
 hLsiK6xYaZ8LwWBBV7WI0Z497oJOzmJYt6JuHcjDdgYYpOEFydnmQKDRKuXPtj9x
 E7jC691PMDa7U1aZVrkrC2LkDF6VmwO+JF6Xjp0bON8CTsTWM4k=
 =qYbT
 -----END PGP SIGNATURE-----

Merge tag 'linux-kselftest-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Minor fixes to tests and one major fix to livepatch test to add skip
  handling to avoid false fail reports when livepatch is disabled"

* tag 'linux-kselftest-5.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/livepatch: add test skip handling
  selftests: mlxsw: Fix typo in qos_mc_aware.sh
  selftests/x86: fix spelling mistake "FAILT" -> "FAIL"
  selftests: kmod: Fix typo in kmod.sh
2019-07-30 13:10:07 -07:00
Minwoo Im
8f55c307ab scsi: mpt3sas: support target smid for [abort|query] task
We can request task management IOCTL command(MPI2_FUNCTION_SCSI_TASK_MGMT)
to /dev/mpt3ctl.  If the given task_type is either abort task or query
task, it may need a field named "Initiator Port Transfer Tag to Manage" in
the IU.

Current code does not support to check target IPTT tag from the tm_request.
This patch introduces to check TaskMID given from the userspace as a target
tag.  We have a rule of relationship between
(struct request *req->tag) and smid in mpt3sas_base.c:

3318 u16
3319 mpt3sas_base_get_smid_scsiio(struct MPT3SAS_ADAPTER *ioc, u8 cb_idx,
3320         struct scsi_cmnd *scmd)
3321 {
3322         struct scsiio_tracker *request = scsi_cmd_priv(scmd);
3323         unsigned int tag = scmd->request->tag;
3324         u16 smid;
3325
3326         smid = tag + 1;

So if we want to abort a request tagged #X, then we can pass (X + 1) to
this IOCTL handler.  Otherwise, user space just can pass 0 TaskMID to abort
the first outstanding smid which is legacy behaviour.

Cc: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Cc: Suganath Prabu Subramani <suganath-prabu.subramani@broadcom.com>
Cc: Sathya Prakash <sathya.prakash@broadcom.com>
Cc: James E.J. Bottomley <jejb@linux.ibm.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: MPT-FusionLinux.pdl@broadcom.com
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Minwoo Im <minwoo.im.dev@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30 16:01:47 -04:00
Linus Torvalds
32a024b9a9 5.3 rc RDMA pull request
A few regression and bug fixes for the patches merged in the last cycle:
 
 - hns fixes a subtle crash from the ib core SGL rework
 
 - hfi1 fixes various error handling, oops and protocol errors
 
 - bnxt_re fixes a regression where nvmeof doesn't work on some
   configurations
 
 - mlx5 fixes a serious 'use after free' bug in how MR caching is handled
 
 - Some edge case crashers in the new statistic core code
 
 - More siw static checker fixups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl1AMh0ACgkQOG33FX4g
 mxr0EQ//RqPk9ne1yoL7q7kbrDIIvhJ7QSI/4hqpcwAqtXc1+N0ujBigAAKZtEyy
 jSQH6p8LIo4oCDlw66JMGIbHqWBbtsiy15oqPUH6d/uI1yguS78ZaMlPrEN+3yWR
 qGGF+M9MW6OXUykm8/dzYSpkM9/w0WiPBsV6MMmlF3dDcRr3NZpDo4qfeZ4gBarJ
 1y+MMEn8Hh5sP1KKKDpcf3sKYxS5rdC6TACyvMz+SRKge+kSWWbEWbJsYHYhBD3M
 JMKsiCw64U9wonvJcIX67WDo2R8gtKsr+7wboOqwrr7AAVIk5s5GPLatCeMq9Z6J
 x4kjlK3+6L+mrJ9RyNRmQZOiOqZwxu7XTzJxrEYnVlTnvqeg1JdUzVyizDhILqtx
 817rCA2PH2KfS7tHsDtnZ/qlzx/lET7N9jCgCD/ltY/SXrTnQcKxw223oY3pDrgY
 7kqPfp8ck1N3zazkmBavFrZgq00sSu0f8Sb0pDzgOGK1EBPnN4EURdAhidCJVGMJ
 cPVcUMASA8wr0g0PdbFJ2h/vNogKIztTpPkaCzweDJ6jx0qI3G/ex8g2/VS458++
 G66WxUe9A6coLDgMSASi9VCDE5ELvAbw0luzojf7HId15LnqRBq4jx7rkfh7ZHZ/
 R9gJXRoiasUyFRV0duEo6MFStbHTIOlRFAR4gD2IAie4VFG4xes=
 =tRje
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma fixes from Jason Gunthorpe:
 "A few regression and bug fixes for the patches merged in the last
  cycle:

   - hns fixes a subtle crash from the ib core SGL rework

   - hfi1 fixes various error handling, oops and protocol errors

   - bnxt_re fixes a regression where nvmeof doesn't work on some
     configurations

   - mlx5 fixes a serious 'use after free' bug in how MR caching is
     handled

   - some edge case crashers in the new statistic core code

   - more siw static checker fixups"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  IB/mlx5: Fix RSS Toeplitz setup to be aligned with the HW specification
  IB/counters: Always initialize the port counter object
  IB/core: Fix querying total rdma stats
  IB/mlx5: Prevent concurrent MR updates during invalidation
  IB/mlx5: Fix clean_mr() to work in the expected order
  IB/mlx5: Move MRs to a kernel PD when freeing them to the MR cache
  IB/mlx5: Use direct mkey destroy command upon UMR unreg failure
  IB/mlx5: Fix unreg_umr to ignore the mkey state
  RDMA/siw: Remove set but not used variables 'rv'
  IB/mlx5: Replace kfree with kvfree
  RDMA/bnxt_re: Honor vlan_id in GID entry comparison
  IB/hfi1: Drop all TID RDMA READ RESP packets after r_next_psn
  IB/hfi1: Field not zero-ed when allocating TID flow memory
  IB/hfi1: Unreserve a flushed OPFN request
  IB/hfi1: Check for error on call to alloc_rsm_map_table
  RDMA/hns: Fix sg offset non-zero issue
  RDMA/siw: Fix error return code in siw_init_module()
2019-07-30 13:01:04 -07:00
Gustavo A. R. Silva
9fba647cfe scsi: ibmvscsi_tgt: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings (Building: powerpc allyesconfig):

drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function 'ibmvscsis_adapter_info':
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:1582:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (connection_broken(vscsi))
      ^
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:1584:2: note: here
  default:
  ^~~~~~~
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c: In function 'ibmvscsis_ping_response':
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:2494:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
   vscsi->flags |= CLIENT_FAILED;
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:2495:2: note: here
  case H_DROPPED:
  ^~~~
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:2496:16: warning: this statement may fall through [-Wimplicit-fallthrough=]
   vscsi->flags |= RESPONSE_Q_DOWN;
drivers/scsi/ibmvscsi_tgt/ibmvscsi_tgt.c:2497:2: note: here
  case H_REMOTE_PARM:
  ^~~~

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Bryant G. Ly <bly@catalogicsoftware.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30 15:59:53 -04:00
Gustavo A. R. Silva
657bd277c1 scsi: cxlflash: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.

This patch fixes the following warnings:

drivers/scsi/cxlflash/main.c: In function 'send_afu_cmd':
drivers/scsi/cxlflash/main.c:2347:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (rc) {
      ^
drivers/scsi/cxlflash/main.c:2357:2: note: here
  case -EAGAIN:
  ^~~~
drivers/scsi/cxlflash/main.c: In function 'term_intr':
drivers/scsi/cxlflash/main.c:754:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (index == PRIMARY_HWQ)
      ^
drivers/scsi/cxlflash/main.c:756:2: note: here
  case UNMAP_TWO:
  ^~~~
drivers/scsi/cxlflash/main.c:757:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   cfg->ops->unmap_afu_irq(hwq->ctx_cookie, 2, hwq);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/cxlflash/main.c:758:2: note: here
  case UNMAP_ONE:
  ^~~~
drivers/scsi/cxlflash/main.c:759:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   cfg->ops->unmap_afu_irq(hwq->ctx_cookie, 1, hwq);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/cxlflash/main.c:760:2: note: here
  case FREE_IRQ:
  ^~~~
drivers/scsi/cxlflash/main.c: In function 'cxlflash_remove':
drivers/scsi/cxlflash/main.c:975:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   cxlflash_release_chrdev(cfg);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/cxlflash/main.c:976:2: note: here
  case INIT_STATE_SCSI:
  ^~~~
drivers/scsi/cxlflash/main.c:978:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   scsi_remove_host(cfg->host);
   ^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/cxlflash/main.c:979:2: note: here
  case INIT_STATE_AFU:
  ^~~~
drivers/scsi/cxlflash/main.c:980:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   term_afu(cfg);
   ^~~~~~~~~~~~~
drivers/scsi/cxlflash/main.c:981:2: note: here
  case INIT_STATE_PCI:
  ^~~~
drivers/scsi/cxlflash/main.c:983:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
   pci_disable_device(pdev);
   ^~~~~~~~~~~~~~~~~~~~~~~~
drivers/scsi/cxlflash/main.c:984:2: note: here
  case INIT_STATE_NONE:
  ^~~~
drivers/scsi/cxlflash/main.c: In function 'num_hwqs_store':
drivers/scsi/cxlflash/main.c:3018:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (cfg->state == STATE_NORMAL)
      ^
drivers/scsi/cxlflash/main.c:3020:2: note: here
  default:
  ^~~~~~~

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Matthew R. Ochs <mrochs@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30 15:58:28 -04:00
Dan Carpenter
1de540a926 scsi: mpt3sas: clean up a couple sizeof() uses
There is a copy and paste bug here.  It uses EVENT_TRIGGERS size instead of
SCSI_TRIGGERS size but fortunately both size are 84 bytes so it doesn't
affect runtime.

These days the preferred style is to just say sizeof(object) instead of
sizeof(type) so I have updated the function to the latest style as well.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-30 15:56:37 -04:00
Linus Torvalds
515f12b9ee HMM patches for 5.3-rc
Fix the locking around nouveau's use of the hmm_range_* APIs. It works
 correctly in the success case, but many of the the edge cases have missing
 unlocks or double unlocks.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl07BG0ACgkQOG33FX4g
 mxr/RA//b1t3rTjyYlzEGpCFouDAJrV8mRrmPZtywzSxhiyKgylWiQ9D5HyAZ8ZG
 evEF1xFe0PcTKiieqnZCJBPh864t+yt9Mm45MpWamBNoHx7WPSdeOMbSDUNvQR+H
 8aWTGBZvdKlqpwD63yvk7C6jkZ6vXDNYROnM395gzlfmaVGBeLygXqcKUkiW1x+D
 1CK+KsBldacxH/gE2X966mXxG46/5VL8KDVoo4VVnpLMDRdRs6zbIBRj7l9+hWbh
 2HABQyvDJW4tYmUW5iHAoLV2fAIE/nJMprEabXvd6rFAPwbryBroguXffGqkIaa0
 Ce1LIhiakCUniK2XgP2W/+KwJQBNp3hQjJr+ip7hgQCtzcD8zRYSxDt5gUtbjpGd
 4JfXrRVrfa08/hBe4adPfE5W5mW3oyEyRHldToT0SrywIY8sTLjN7RdCMwOqrxoR
 QkgqDISLqJab1OQEPHr7QgsgO2c2k19yPpckSZJ+IIldpNtLa9V+eif85NZ/esOd
 2GTWph3UQiACp9fLgEIAvJUnZ0blZpYq9TYshWWYkO34M+KgBdqOn1cQhZH+4rWb
 0Ed/jGdIaPZZ7XaLDgz5e7jl+t+kmSBdqSQtunF4bbu7AwR/zt3es0jq2vFoD451
 syF2vSVKyoBZMESX8X0O2cv+HHpN5oqH1XLI1ABOO09X9lxAPl4=
 =ZdrW
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull HMM fixes from Jason Gunthorpe:
 "Fix the locking around nouveau's use of the hmm_range_* APIs. It works
  correctly in the success case, but many of the the edge cases have
  missing unlocks or double unlocks.

  The diffstat is a bit big as Christoph did a comprehensive job to move
  the obsolete API from the core header and into the driver before
  fixing its flow, but the risk of regression from this code motion is
  low"

* tag 'for-linus-hmm' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  nouveau: unlock mmap_sem on all errors from nouveau_range_fault
  nouveau: remove the block parameter to nouveau_range_fault
  mm/hmm: move hmm_vma_range_done and hmm_vma_fault to nouveau
  mm/hmm: always return EBUSY for invalid ranges in hmm_range_{fault,snapshot}
2019-07-30 12:54:44 -07:00
Lucas De Marchi
5552336014 drm/i915/tgl: handle DP aux interrupts
For Tiger Lake the DE Port Interrupt Definition bits changed, so use the
new bit definitions.

Cc: Jose Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-7-lucas.demarchi@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190725234813.27179-4-lucas.demarchi@intel.com
2019-07-30 12:31:08 -07:00
José Roberto de Souza
48ef15d32a drm/i915/tgl: Update north display hotplug detection to TGL connections
TGL has 3 combophys and 6 TC/TBT ports, so it has 2 more TC/TBT ports
than ICL and the PORT_C on TGL is a combophy.
So here adding a new hpd north table and function to detect long
pulse for TGL.

Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190713010940.17711-6-lucas.demarchi@intel.com
Link: https://patchwork.freedesktop.org/patch/msgid/20190725234813.27179-3-lucas.demarchi@intel.com
2019-07-30 12:31:08 -07:00
Lucas De Marchi
52dfdba0a9 drm/i915/tgl: Add hpd interrupt handling
Add hotdplug detection for all ports on TGP. icp_hpd_detection_setup()
is refactored to be shared with TGP.

While we increase the number of pins, add a BUILD_BUG_ON() to avoid
going over the number of bits allowed.

v2: use BITS_PER_TYPE and correct type for BUILD_BUG_ON() check
    (requested by Ville)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jose Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190725234813.27179-2-lucas.demarchi@intel.com
2019-07-30 12:31:08 -07:00
Gustavo A. R. Silva
e008227eb3 HSI: ssi_protocol: Mark expected switch fall-throughs
Mark switch cases where we are expecting to fall through.

This patch fixes the following warning (Building: arm):

drivers/hsi/clients/ssi_protocol.c: In function ‘ssip_set_rxstate’:
drivers/hsi/clients/ssi_protocol.c:291:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
   if (atomic_read(&ssi->tx_usecnt))
      ^
drivers/hsi/clients/ssi_protocol.c:294:2: note: here
  case RECEIVING:
  ^~~~

drivers/hsi/clients/ssi_protocol.c: In function ‘ssip_keep_alive’:
drivers/hsi/clients/ssi_protocol.c:466:7: warning: this statement may fall through [-Wimplicit-fallthrough=]
    if (atomic_read(&ssi->tx_usecnt) == 0)
       ^
drivers/hsi/clients/ssi_protocol.c:472:3: note: here
   case SEND_IDLE:
   ^~~~

Notice that, in this particular case, the code comment is
modified in accordance with what GCC is expecting to find.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-07-30 21:26:24 +02:00
Jan Kara
89e524c04f loop: Fix mount(2) failure due to race with LOOP_SET_FD
Commit 33ec3e53e7 ("loop: Don't change loop device under exclusive
opener") made LOOP_SET_FD ioctl acquire exclusive block device reference
while it updates loop device binding. However this can make perfectly
valid mount(2) fail with EBUSY due to racing LOOP_SET_FD holding
temporarily the exclusive bdev reference in cases like this:

for i in {a..z}{a..z}; do
        dd if=/dev/zero of=$i.image bs=1k count=0 seek=1024
        mkfs.ext2 $i.image
        mkdir mnt$i
done

echo "Run"
for i in {a..z}{a..z}; do
        mount -o loop -t ext2 $i.image mnt$i &
done

Fix the problem by not getting full exclusive bdev reference in
LOOP_SET_FD but instead just mark the bdev as being claimed while we
update the binding information. This just blocks new exclusive openers
instead of failing them with EBUSY thus fixing the problem.

Fixes: 33ec3e53e7 ("loop: Don't change loop device under exclusive opener")
Cc: stable@vger.kernel.org
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-30 13:16:57 -06:00
Rob Herring
740ce365a4 dt-bindings: Fix generated example files getting added to schemas
Commit 837158b847 ("dt-bindings: Check the examples against the
schemas") started generating YAML encoded DT files to validate the
examples against the schema. When running 'make dt_binding_check' in
tree after the 1st time, the generated example .dt.yaml files are
mistakenly added to the list of schema files. Exclude *.example.dt.yaml
files from the search for schema files.

Fixes: 837158b847 ("dt-bindings: Check the examples against the schemas")
Reported-by: Guido Günther <agx@sigxcpu.org>
Tested-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Rob Herring <robh@kernel.org>
2019-07-30 13:09:57 -06:00
Rodrigo Vivi
e0e712fe42 drm/i915: Update DRIVER_DATE to 20190730
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-07-30 11:50:24 -07:00
Stephen Boyd
04d15d5cad staging: Remove dev_err() usage after platform_get_irq()
We don't need dev_err() messages when platform_get_irq() fails now that
platform_get_irq() prints an error message itself when something goes
wrong. Let's remove these prints with a simple semantic patch.

// <smpl>
@@
expression ret;
struct platform_device *E;
@@

ret =
(
platform_get_irq(E, ...)
|
platform_get_irq_byname(E, ...)
);

if ( \( ret < 0 \| ret <= 0 \) )
{
(
-if (ret != -EPROBE_DEFER)
-{ ...
-dev_err(...);
-... }
|
...
-dev_err(...);
)
...
}
// </smpl>

While we're here, remove braces on if statements that only have one
statement (manually).

Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190730181557.90391-43-swboyd@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-30 20:50:04 +02:00