Commit graph

982,081 commits

Author SHA1 Message Date
Andy Shevchenko
da05208a0c NFC: nxp-nci: Drop of_match_ptr() use
There is no need to guard OF device ID table with of_match_ptr().
Otherwise we would get a defined but not used data.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:56:26 -07:00
Andy Shevchenko
52c2ea0491 NFC: nxp-nci: Constify acpi_device_id
The content of acpi_device_id is not supposed to change at runtime.
All functions working with acpi_device_id provided by <linux/acpi.h>
work with const acpi_device_id. So mark the non-const structs as const.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:56:26 -07:00
Andy Shevchenko
4f1cbf24fc NFC: nxp-nci: Get rid of useless label
Return directly in ->probe() since there no special cleaning is needed.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:56:26 -07:00
Andy Shevchenko
ad0acfd69a NFC: nxp-nci: Get rid of code duplication in ->probe()
Since OF and ACPI case almost the same get rid of code duplication
by moving gpiod_get() calls directly to ->probe().

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:56:26 -07:00
Andy Shevchenko
099d03f02d NFC: nxp-nci: Add GPIO ACPI mapping table
In order to unify GPIO resource request prepare gpiod_get_index()
to behave correctly when there is no mapping provided by firmware.

Here we add explicit mapping between _CRS GpioIo() resources and
their names used in the driver.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:56:26 -07:00
Andy Shevchenko
43201767b4 NFC: nxp-nci: Convert to use GPIO descriptor
Since we got rid of platform data, the driver may use
GPIO descriptor directly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:56:26 -07:00
Andy Shevchenko
3b0b278312 NFC: nxp-nci: Get rid of platform data
Legacy platform data must go away. We are on the safe side here since
there are no users of it in the kernel.

If anyone by any odd reason needs it the GPIO lookup tables and
built-in device properties at your service.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:56:26 -07:00
Andy Shevchenko
1b14a37565 NFC: nxp-nci: Add NXP1001 to the ACPI ID table
It seems a lot of laptops are equipped with NXP NFC300 chip with
the ACPI ID NXP1001 as per DSDT.

Append it to the driver's ACPI ID table.

Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:56:26 -07:00
Andrey Konovalov
18917d5147 NFC: fix attrs checks in netlink interface
nfc_genl_deactivate_target() relies on the NFC_ATTR_TARGET_INDEX
attribute being present, but doesn't check whether it is actually
provided by the user. Same goes for nfc_genl_fw_download() and
NFC_ATTR_FIRMWARE_NAME.

This patch adds appropriate checks.

Found with syzkaller.

Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:56:26 -07:00
Rodrigo Vivi
ed32f8d42c Merge drm/drm-next into drm-intel-next-queued
Catching up with 5.3-rc*

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2019-07-29 08:51:48 -07:00
Parav Pandit
3e1f000ff7 IB/mlx5: Support per device q counters in switchdev mode
When parent mlx5_core_dev is in switchdev mode, q_counters are not
applicable to multiple non uplink vports.
Hence, have make them limited to device level.

While at it, correct __mlx5_ib_qp_set_counter() and
__mlx5_ib_modify_qp() to use u16 set_id as defined by the device.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190723073117.7175-3-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-29 11:33:28 -04:00
Parav Pandit
5dcecbc967 IB/mlx5: Refactor code for counters allocation
To support per device counters in switchdev mode (instead of
per port counter), refactor query routines to work on mlx5_ib_counter
structure instead of mlx5_ib_port structure.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Link: https://lore.kernel.org/r/20190723073117.7175-2-leon@kernel.org
Signed-off-by: Doug Ledford <dledford@redhat.com>
2019-07-29 11:33:28 -04:00
Fuqian Huang
35b7c80827 platform/x86: thinkpad_acpi: Use kmemdup rather than duplicating its implementation
kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-07-29 18:31:48 +03:00
Fuqian Huang
340f25ff1d platform/x86: asus-wmi: Use kmemdup rather than duplicating its implementation
kmemdup is introduced to duplicate a region of memory in a neat way.
Rather than kmalloc/kzalloc + memcpy, which the programmer needs to
write the size twice (sometimes lead to mistakes), kmemdup improves
readability, leads to smaller code and also reduce the chances of mistakes.
Suggestion to use kmemdup rather than using kmalloc/kzalloc + memcpy.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-07-29 18:31:48 +03:00
Kai-Heng Feng
4215484f8e platform/x86: hp_accel: Add support for HP ZBook 17 G5
HP ZBook 17 G5 needs a non-standard mapping, x_inverted.

Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-07-29 18:31:48 +03:00
Enrico Weigelt
f14312a93b platform/x86: pcengines-apuv2: use KEY_RESTART for front button
The keycode KEY_RESTART is more appropriate for the front button,
as most people use it for things like restart or factory reset.

Signed-off-by: Enrico Weigelt <info@metux.net>
Fixes: f8eb0235f6 ("x86: pcengines apuv2 gpio/leds/keys platform driver")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-07-29 18:24:59 +03:00
David S. Miller
d24b6c624b Merge branch 'hns3-next'
Huazhong Tan says:

====================
net: hns3: some code optimizations & bugfixes & features

This patch-set includes code optimizations, bugfixes and features for
the HNS3 ethernet controller driver.

[patch 1/10] checks reset status before setting channel.

[patch 2/10] adds a NULL pointer checking.

[patch 3/10] removes reset level upgrading when current reset fails.

[patch 4/10] fixes a GFP flags errors when holding spin_lock.

[patch 5/10] modifies firmware version format.

[patch 6/10] adds some print information which is off by default.

[patch 7/10 - 8/10] adds two code optimizations about interrupt handler
and work task.

[patch 9/10] adds support for using order 1 pages with a 4K buffer.

[patch 10/10] modifies messages prints with dev_info() instead of
pr_info().

Change log:
V3->V4: replace netif_info with netif_dbg in [patch 6/10]
V2->V3: fixes comments from Saeed Mahameed and Joe Perches.
V1->V2: fixes comments from Saeed Mahameed and
	removes previous [patch 4/11] and [patch 11/11]
	which needs further discussion, and adds a new
	patch [10/10] suggested by Saeed Mahameed.
====================

Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:23:41 -07:00
Huazhong Tan
08d80a4c90 net: hns3: use dev_info() instead of pr_info()
dev_info() is more appropriate for printing messages when driver
initialization done, so switch to dev_info().

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:23:41 -07:00
Yunsheng Lin
dbba6da0c6 net: hns3: Add support for using order 1 pages with a 4K buffer
Hardware supports 0.5K, 1K, 2K, 4K RX buffer size, the
RX buffer can not be reused because the hns3_page_order
return 0 when page size and RX buffer size are both 4096.

So this patch changes the hns3_page_order to return 1 when
RX buffer is greater than half of the page size and page size
is less the 8192, and dev_alloc_pages has already been used
to allocate the compound page for RX buffer.

This patch also changes hnae3_* to hns3_* for page order
and RX buffer size calculation because they are used in
hns3 module.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:23:41 -07:00
Yunsheng Lin
0812545487 net: hns3: add interrupt affinity support for misc interrupt
The misc interrupt is used to schedule the reset and mailbox
subtask, and service_task delayed_work is used to do periodic
management work each second.

This patch sets the above three subtask's affinity using the
misc interrupt' affinity.

Also this patch setups a affinity notify for misc interrupt to
allow user to change the above three subtask's affinity.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:23:41 -07:00
Yunsheng Lin
7be1b9f3e9 net: hns3: make hclge_service use delayed workqueue
Use delayed work instead of using timers to trigger the
hclge_serive.

Simplify the code with one less middle function and in order
to support misc irq affinity.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Reviewed-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:23:40 -07:00
Yonglong Liu
1c822948fa net: hns3: add debug messages to identify eth down cause
Some times just see the eth interface have been down/up via
dmesg, but can not know why the eth down. So adds some debug
messages to identify the cause for this.

Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:23:40 -07:00
Yufeng Mo
923713730d net: hns3: modify firmware version display format
This patch modifies firmware version display format in
hclge(vf)_cmd_init() and hns3_get_drvinfo(). Also, adds
some optimizations for firmware version display format.

Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:23:40 -07:00
Yufeng Mo
d659f9f60f net: hns3: change GFP flag during lock period
When allocating memory, the GFP_KERNEL cannot be used during the
spin_lock period. This is because it may cause scheduling when holding
spin_lock. This patch changes GFP flag to GFP_ATOMIC in this case.

Fixes: dd74f815dd ("net: hns3: Add support for rule add/delete for flow director")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: lipeng 00277521 <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:23:40 -07:00
Huazhong Tan
8e9eee7831 net: hns3: remove upgrade reset level when reset fail
Currently, hclge_reset_err_handle() will assert a global reset
when the failing count is smaller than MAX_RESET_FAIL_CNT, which
will affect other running functions.

So this patch removes this upgrading, and uses re-scheduling reset
task to do it.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Reviewed-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:23:40 -07:00
Guangbin Huang
aa3253b889 net: hns3: add a check for get_reset_level
For some cases, ops->get_reset_level may not be implemented, so we
should check whether it is NULL before calling get_reset_level.

Signed-off-by: Guangbin Huang <huangguangbin@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:23:40 -07:00
Jian Shen
44950d28cc net: hns3: add reset checking before set channels
hns3_set_channels() should check the resetting status firstly,
since the device will reinitialize when resetting. If the
reset has not completed, the hns3_set_channels() may access
invalid memory.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-29 08:23:40 -07:00
Joel Fernandes (Google)
1caf7d50f4 pidfd: Add warning if exit_state is 0 during notification
Previously a condition got missed where the pidfd waiters are awakened
before the exit_state gets set. This can result in a missed notification
[1] and the polling thread waiting forever.

It is fixed now, however it would be nice to avoid this kind of issue
going unnoticed in the future. So just add a warning to catch it in the
future.

/* References */
[1]: https://lore.kernel.org/lkml/20190717172100.261204-1-joel@joelfernandes.org/

Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Link: https://lore.kernel.org/r/20190724164816.201099-1-joel@joelfernandes.org
Signed-off-by: Christian Brauner <christian@brauner.io>
2019-07-29 17:20:19 +02:00
Christian Brauner
3884ae44f4
pidfd: remove obsolete comments from test
Since the introduction of CLONE_PIDFD pidfd_send_signal() is independent
of CONFIG_PROC_FS.

Signed-off-by: Christian Brauner <christian@brauner.io>
2019-07-29 17:17:27 +02:00
Chris Wilson
60a4233a49 drm/i915: Flush the i915_vm_release before ggtt shutdown
As the gen6_ppgtt may refer back to the GGTT for their page-directory
slots, make sure those __i915_vm_release are completed prior to shutting
down the GGTT.

Fixes: b32fa81115 ("drm/i915/gtt: Defer address space cleanup to an RCU worker")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729132412.23380-1-chris@chris-wilson.co.uk
2019-07-29 15:56:48 +01:00
John Crispin
2ab4587675 mac80211: add support for the ADDBA extension element
HE allows peers to negotiate the aggregation fragmentation level to be used
during transmission. The level can be 1-3. The Ext element is added behind
the ADDBA request inside the action frame. The responder will then reply
with the same level or a lower one if the requested one is not supported.
This patch only handles the negotiation part as the ADDBA frames get passed
to the ATH11k firmware, which does the rest of the magic for us aswell as
generating the requests.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
Link: https://lore.kernel.org/r/20190729104512.27615-1-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-29 16:40:22 +02:00
John Crispin
697f6c507c mac80211: propagate HE operation info into bss_conf
Upon a successful assoc a station shall store the content of the HE
operation element inside bss_conf so that the driver can setup the
hardware accordingly.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20190729102342.8659-2-john@phrozen.org
[use struct copy]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-29 16:39:37 +02:00
John Crispin
90d4962cfc mac80211: fix ieee80211_he_oper_size() comment
Johannes mentioned that the comment should not reference mac80211 as other
subsystems might call the helper.

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20190729102342.8659-1-john@phrozen.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-29 16:34:52 +02:00
Michael Vassernis
d34990bbc2 cfg80211: fix dfs channels remain DFS_AVAILABLE after ch_switch
Depending on the regulatory domain, leaving a DFS channel requires
a new CAC to be performed when returning back to that channel.
If needed, update dfs states after a driver channel switch.

Signed-off-by: Michael Vassernis <michael.vassernis@tandemg.com>
Link: https://lore.kernel.org/r/20190729060024.5660-1-michael.vassernis@tandemg.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-29 16:34:41 +02:00
Sergey Matyukevich
0afd425b1b cfg80211: fix duplicated scan entries after channel switch
When associated BSS completes channel switch procedure, its channel
record needs to be updated. The existing mac80211 solution was
extended to cfg80211 in commit 5dc8cdce1d ("mac80211/cfg80211:
update bss channel on channel switch").

However that solution still appears to be incomplete as it may lead
to duplicated scan entries for associated BSS after channel switch.
The root cause of the problem is as follows. Each BSS entry is
included into the following data structures:
- bss list rdev->bss_list
- bss search tree rdev->bss_tree
Updating BSS channel record without rebuilding bss_tree may break
tree search since cmp_bss considers all of the following: channel,
bssid, ssid. When BSS channel is updated, but its location in bss_tree
is not updated, then subsequent search operations may fail to locate
this BSS since they will be traversing bss_tree in wrong direction.
As a result, for scan performed after associated BSS channel switch,
cfg80211_bss_update may add the second entry for the same BSS to both
bss_list and bss_tree, rather then update the existing one.

To summarize, if BSS channel needs to be updated, then bss_tree should
be rebuilt in order to put updated BSS entry into a proper location.

This commit suggests the following straightforward solution:
- if new entry has been already created for BSS after channel switch,
  then use its IEs to update known BSS entry and then remove new
  entry completely
- use rb_erase/rb_insert_bss reinstall updated BSS in bss_tree
- for nontransmit BSS entry, the whole transmit BSS hierarchy
  is updated

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20190726163922.27509-3-sergey.matyukevich.os@quantenna.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-29 16:23:13 +02:00
Sergey Matyukevich
3ab8227d3e cfg80211: refactor cfg80211_bss_update
This patch implements minor refactoring for cfg80211_bss_update function.
Code path for updating known BSS is extracted into dedicated
cfg80211_update_known_bss function.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20190726163922.27509-2-sergey.matyukevich.os@quantenna.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-29 16:23:13 +02:00
Jia-Ju Bai
b55f3b8410 mac80211_hwsim: Fix possible null-pointer dereferences in hwsim_dump_radio_nl()
In hwsim_dump_radio_nl(), when genlmsg_put() on line 3617 fails, hdr is
assigned to NULL. Then hdr is used on lines 3622 and 3623:
    genl_dump_check_consistent(cb, hdr);
    genlmsg_end(skb, hdr);

Thus, possible null-pointer dereferences may occur.

To fix these bugs, hdr is used here when it is not NULL.

This bug is found by a static analysis tool STCheck written by us.

Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Link: https://lore.kernel.org/r/20190729082332.28895-1-baijiaju1990@gmail.com
[put braces on all branches]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-29 16:20:34 +02:00
Brian Norris
05aaa5c97d mac80211: don't WARN on short WMM parameters from AP
In a very similar spirit to commit c470bdc1aa ("mac80211: don't WARN
on bad WMM parameters from buggy APs"), an AP may not transmit a
fully-formed WMM IE. For example, it may miss or repeat an Access
Category. The above loop won't catch that and will instead leave one of
the four ACs zeroed out. This triggers the following warning in
drv_conf_tx()

  wlan0: invalid CW_min/CW_max: 0/0

and it may leave one of the hardware queues unconfigured. If we detect
such a case, let's just print a warning and fall back to the defaults.

Tested with a hacked version of hostapd, intentionally corrupting the
IEs in hostapd_eid_wmm().

Cc: stable@vger.kernel.org
Signed-off-by: Brian Norris <briannorris@chromium.org>
Link: https://lore.kernel.org/r/20190726224758.210953-1-briannorris@chromium.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-29 16:19:44 +02:00
Geert Uytterhoeven
0ed0eb0171 soc: renesas: rcar-sysc: Use [] to denote a flexible array member
Flexible array members should be denoted using [] instead of [0], else
gcc will not warn when they are no longer at the end of the structure.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-07-29 15:36:56 +02:00
Fabrizio Castro
8cb7ec1418 dt-bindings: can: rcar_can: Complete documentation for RZ/G2[EM]
Add missing RZ/G2[EM] CANFD clock specific documentation.

Fixes: 868b7c0f43 ("dt-bindings: can: rcar_can: Add r8a774a1 support")
Fixes: d703a52eb1 ("dt-bindings: can: rcar_can: Add r8a774c0 support")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-07-29 15:36:39 +02:00
Fabrizio Castro
a7aa356e2c dt-bindings: can: rcar_canfd: document r8a774a1 support
Document the support for rcar_canfd on R8A774A1 SoC devices.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-07-29 15:36:39 +02:00
Fabrizio Castro
a44efeaa0b arm64: dts: renesas: r8a774a1: Add SSIU support for sound
Add SSIU support to the SoC DT as the sound driver supports
it now, and also since the sound driver can now handle
BUSIF0-7 via SSIU remove the no longer needed "rxu" and "txu"
properties.

Based on similar work from Kuninori Morimoto and Simon Horman in commits
8d14bfa074 ("arm64: dts: renesas: r8a7796: add SSIU support for
sound") and 10bd03fa89 ("arm64: dts: renesas: r8a7796: remove BUSIF0
settings from rcar_sound,ssi").

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-07-29 15:36:00 +02:00
Fabrizio Castro
da245a5066 arm64: dts: renesas: r8a774a1: Use extended audio dmac registers
Basic audio dmac register only supports busif from 0 to 3,
in order to use busif4 ~ busif7 extended audio dmac registers
need to be used.

Based on similar work from Jiada Wang in commit 7a516e49d9 ("arm64:
dts: renesas: use extended audio dmac register").

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-07-29 15:36:00 +02:00
Biju Das
176f936a1e arm64: dts: renesas: hihope-common: Add WLAN support
This patch enables WLAN support for the HiHope RZ/G2[MN] boards.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-07-29 15:36:00 +02:00
Biju Das
d112c20925 arm64: dts: renesas: hihope-common: Add BT support
This patch enables BT support for the HiHope RZ/G2[MN] boards.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-07-29 15:36:00 +02:00
Biju Das
cd3e43be14 arm64: dts: renesas: hihope-common: Add PCA9654 I/O expander
Enable PCA9654 GPIO expander, so that we can configure its GPIOs later.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-07-29 15:36:00 +02:00
Fabrizio Castro
816c5248df arm64: dts: renesas: hihope-rzg2-ex: Enable CAN interfaces
This patch enables both CAN0 and CAN1, both exposed via
connectors found on the expansion board.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-07-29 15:36:00 +02:00
Fabrizio Castro
5b971c71dd arm64: dts: renesas: r8a774a1: Add CANFD support
Add CANFD support to the SoC specific dtsi.

Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-07-29 15:36:00 +02:00
Fabrizio Castro
0a930f64a1 arm64: dts: renesas: r8a774a1: Add missing assigned-clocks for CAN[01]
Define "assigned-clocks" and "assigned-clock-rates" properties
for CAN[01] DT nodes, as required by the dt-bindings.

Fixes: eccc400029 ("arm64: dts: renesas: r8a774a1: Add clkp2 clock to CAN nodes")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-07-29 15:36:00 +02:00
Fabrizio Castro
e8efd2a8e2 arm64: dts: renesas: r8a774c0: Add missing assigned-clocks for CAN[01]
Define "assigned-clocks" and "assigned-clock-rates" properties
for CAN[01] DT nodes, as required by the dt-bindings.

Fixes: 036bc85c1d ("arm64: dts: renesas: r8a774c0: Add clkp2 clock to CAN nodes")
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-07-29 15:36:00 +02:00