Commit graph

982,081 commits

Author SHA1 Message Date
Alexandre Mergnat
282420eed2 clk: meson: axg-audio: migrate to the new parent description method
This clock controller use the string comparison method to describe parent
relation between the clocks, which is not optimized. A recent patch [0]
allows parents to be specified without string names or with device-tree
clock name by using a new assignment structure.

Migrate to the new way by using .parent_hws where possible (when parent
clocks are localy declared in the controller) and use .parent_data
otherwise.

Remove clk input helper and all bypass clocks (declared in probe function)
which are no longer used since we are able to use device-tree clock name
directly.

[0] commit fc0c209c14 ("clk: Allow parents to be specified without string names")

Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
[jbrunet@baylibre.com: remove CLK_SET_RATE_PARENT from mst muxes]
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
2019-07-29 12:42:48 +02:00
Will Deacon
849adec412 arm64: compat: Allow single-byte watchpoints on all addresses
Commit d968d2b801 ("ARM: 7497/1: hw_breakpoint: allow single-byte
watchpoints on all addresses") changed the validation requirements for
hardware watchpoints on arch/arm/. Update our compat layer to implement
the same relaxation.

Cc: <stable@vger.kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
2019-07-29 11:06:17 +01:00
Anders Roxell
cdb2d3ee04 arm64: KVM: hyp: debug-sr: Mark expected switch fall-through
When fall-through warnings was enabled by default the following warnings
was starting to show up:

../arch/arm64/kvm/hyp/debug-sr.c: In function ‘__debug_save_state’:
../arch/arm64/kvm/hyp/debug-sr.c:20:19: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
  case 15: ptr[15] = read_debug(reg, 15);   \
../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’
  save_debug(dbg->dbg_bcr, dbgbcr, brps);
  ^~~~~~~~~~
../arch/arm64/kvm/hyp/debug-sr.c:21:2: note: here
  case 14: ptr[14] = read_debug(reg, 14);   \
  ^~~~
../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’
  save_debug(dbg->dbg_bcr, dbgbcr, brps);
  ^~~~~~~~~~
../arch/arm64/kvm/hyp/debug-sr.c:21:19: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
  case 14: ptr[14] = read_debug(reg, 14);   \
../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’
  save_debug(dbg->dbg_bcr, dbgbcr, brps);
  ^~~~~~~~~~
../arch/arm64/kvm/hyp/debug-sr.c:22:2: note: here
  case 13: ptr[13] = read_debug(reg, 13);   \
  ^~~~
../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’
  save_debug(dbg->dbg_bcr, dbgbcr, brps);
  ^~~~~~~~~~

Rework to add a 'Fall through' comment where the compiler warned
about fall-through, hence silencing the warning.

Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
[maz: fixed commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-07-29 11:01:37 +01:00
Chris Wilson
76c5399fe2 drm/i915/selftests: Careful not to flush hang_fini on error setups
Smatch spotted that we test at the start of hang_fini for a valid (h->gt
is only set after a request is created) but then used it regardless
later on.

v2: Alternatively, we do not need to check as we now always prime h->gt
in hang_init()

References: cb823ed991 ("drm/i915/gt: Use intel_gt as the primary object for handling resets")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190729085944.2179-1-chris@chris-wilson.co.uk
2019-07-29 11:00:18 +01:00
Ben Segal
2aa4e41079 habanalabs: fix host memory polling in BE architecture
This patch fix a bug in the host memory polling macro. The bug is that the
memory being polled can be written by the device, which always writes it
in LE. However, if the host is running Linux in BE mode, we need to
convert the value that was written by the device before matching it to the
required value that the caller has given to the macro.

Signed-off-by: Ben Segal <bpsegal20@gmail.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-07-29 11:40:25 +03:00
Ben Segal
75035fe22b habanalabs: fix F/W download in BE architecture
writeX macros might perform byte-swapping in BE architectures. As our F/W
is in LE format, we need to make sure no byte-swapping will occur.

There is a standard kernel function (called memcpy_toio) for copying data
to I/O area which is used in a lot of drivers to download F/W to PCIe
adapters. That function also makes sure the data is copied "as-is",
without byte-swapping.

This patch use that function to copy the F/W to the GOYA ASIC instead of
writeX macros.

Signed-off-by: Ben Segal <bpsegal20@gmail.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Oded Gabbay <oded.gabbay@gmail.com>
2019-07-29 11:40:25 +03:00
Johannes Berg
f474808acb ALSA: aoa: onyx: always initialize register read value
A lot of places in the driver use onyx_read_register() without
checking the return value, and it's been working OK for ~10 years
or so, so probably never fails ... Rather than trying to check the
return value everywhere, which would be relatively intrusive, at
least make sure we don't use an uninitialized value.

Fixes: f3d9478b2c ("[ALSA] snd-aoa: add snd-aoa")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-07-29 09:21:39 +02:00
Andy Shevchenko
57dbd0e4b9 dmaengine: stm32-mdma: Switch to use device_property_count_u32()
Use use device_property_count_u32() directly, that makes code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190723190757.67351-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29 12:25:21 +05:30
Andy Shevchenko
2cb114c4fa dmaengine: stm32-dmamux: Switch to use device_property_count_u32()
Use use device_property_count_u32() directly, that makes code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190723190757.67351-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29 12:25:21 +05:30
Simon Horman
ffbb569b9c dt-bindings: dmaengine: shdma: Rename bindings documentation file
Rename the bindings documentation file for shdma
from shdma.txt to renesas,shdma.txt.

This is part of an ongoing effort to name bindings documentation files for
Renesas IP blocks consistently, in line with the compat strings they
document.

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Link: https://lore.kernel.org/r/20190724114946.14021-1-horms+renesas@verge.net.au
[vkoul: add subsystem name]
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29 12:23:22 +05:30
Nicolin Chen
f46cc01525 dma-contiguous: page-align the size in dma_free_contiguous()
According to the original dma_direct_alloc_pages() code:
{
	unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT;

	if (!dma_release_from_contiguous(dev, page, count))
		__free_pages(page, get_order(size));
}

The count parameter for dma_release_from_contiguous() was page
aligned before the right-shifting operation, while the new API
dma_free_contiguous() forgets to have PAGE_ALIGN() at the size.

So this patch simply adds it to prevent any corner case.

Fixes: fdaeec198ada ("dma-contiguous: add dma_{alloc,free}_contiguous() helpers")
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-29 09:50:04 +03:00
Nicolin Chen
c6622a425a dma-contiguous: do not overwrite align in dma_alloc_contiguous()
The dma_alloc_contiguous() limits align at CONFIG_CMA_ALIGNMENT for
cma_alloc() however it does not restore it for the fallback routine.
This will result in a size mismatch between the allocation and free
when running into the fallback routines after cma_alloc() fails, if
the align is larger than CONFIG_CMA_ALIGNMENT.

This patch adds a cma_align to take care of cma_alloc() and prevent
the align from being overwritten.

Fixes: fdaeec198ada ("dma-contiguous: add dma_{alloc,free}_contiguous() helpers")
Reported-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-07-29 09:50:04 +03:00
Maxime Ripard
edd14218bd dt-bindings: dmaengine: Convert Allwinner A31 and A64 DMA to a schema
The newer Allwinner SoCs have a DMA controller supported in Linux, with a
matching Device Tree binding.

Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/20190720092607.31095-3-maxime.ripard@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29 12:18:49 +05:30
Maxime Ripard
545a29c811 dt-bindings: dmaengine: Convert Allwinner A10 DMA to a schema
The older Allwinner SoCs have a DMA controller supported in Linux, with a
matching Device Tree binding.

Now that we have the DT validation in place, let's convert the device tree
bindings for that controller over to a YAML schemas.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://lore.kernel.org/r/20190720092607.31095-2-maxime.ripard@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29 12:18:49 +05:30
Maxime Ripard
b37e3534ac dt-bindings: dmaengine: Add YAML schemas for the generic DMA bindings
The DMA controllers and consumers have a bunch of generic properties that
are needed in a device tree. Add a YAML schemas for those.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>

Link: https://lore.kernel.org/r/20190720092607.31095-1-maxime.ripard@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29 12:18:49 +05:30
Peter Ujfalusi
aa3c6ce4ea dmaengine: ti: edma: Support for polled (memcpy) completion
When a DMA client driver does not set the DMA_PREP_INTERRUPT because it
does not want to use interrupts for DMA completion or because it can not
rely on DMA interrupts due to executing the memcpy when interrupts are
disabled it will poll the status of the transfer.

Since we can not tell from any EDMA register that the transfer is
completed, we can only know that the paRAM set has been sent to TPTC for
processing we need to check the residue of the transfer, if it is 0 then
the transfer is completed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190716082655.1620-4-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29 12:11:38 +05:30
Peter Ujfalusi
097ffdc752 dmaengine: ti: edma: Correct the residue calculation (fix for memcpy)
For memcpy we never stored the start address of the transfer for the pset
which rendered the memcpy residue calculation completely broken.

In the edma_residue() function we also need to to some correction for the
calculations:
Instead waiting for all EDMA channels to be idle (in a busy system it can
take few iteration to hit a point when all queues are idle) wait for the
event pending on the given channel (SH_ER for hw synchronized channels,
SH_ESR for manually triggered channels).

If the position returned by EMDA is 0 it implies that the last paRAM set
has been consumed and we are at the closing dummy set, thus we can conclude
that the transfer is completed and we can return 0 as residue.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
[vkoul: fixed typo in commit log]
Link: https://lore.kernel.org/r/20190716082655.1620-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29 12:11:38 +05:30
Peter Ujfalusi
e96b1f64ee dmaengine: ti: edma: Clean up the 2x32bit array register accesses
Introduce defines for getting the array index and the bit number within the
64bit array register pairs.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190716082655.1620-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29 12:11:38 +05:30
Peter Ujfalusi
4689d35c76 dmaengine: ti: omap-dma: Improved memcpy polling support
When a DMA client driver does not set the DMA_PREP_INTERRUPT because it
does not want to use interrupts for DMA completion or because it can not
rely on DMA interrupts due to executing the memcpy when interrupts are
disabled it will poll the status of the transfer.

If the interrupts are enabled then the cookie will be set completed in the
interrupt handler so only check in HW completion when the polling is really
needed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190716082459.1222-3-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29 12:05:01 +05:30
Peter Ujfalusi
aac8670369 dmaengine: ti: omap-dma: Readability cleanup in omap_dma_tx_status()
The tx_status is most likely going to be asked for the current transfer, so
check that first then try to fall back to lookup of non started transfers.

In this way the code is a bit more readable and in most cases we will avoid
to run vchan_find_desc() all the time.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Link: https://lore.kernel.org/r/20190716082459.1222-2-peter.ujfalusi@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-29 12:05:01 +05:30
Greg Kroah-Hartman
2a0f4f16d2 Merge 5.3-rc2 into usb-next
We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-29 08:30:04 +02:00
Greg Kroah-Hartman
6de465a50a Merge 5.3-rc2 into char-misc-next
We want the char/misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-29 08:25:19 +02:00
Icenowy Zheng
38fb6d0ea3 f2fs: use EINVAL for superblock with invalid magic
The kernel mount_block_root() function expects -EACESS or -EINVAL for a
unmountable filesystem when trying to mount the root with different
filesystem types.

However, in 5.3-rc1 the behavior when F2FS code cannot find valid block
changed to return -EFSCORRUPTED(-EUCLEAN), and this error code makes
mount_block_root() fail when trying to probe F2FS.

When the magic number of the superblock mismatches, it has a high
probability that it's just not a F2FS. In this case return -EINVAL seems
to be a better result, and this return value can make mount_block_root()
probing work again.

Return -EINVAL when the superblock has magic mismatch, -EFSCORRUPTED in
other cases (the magic matches but the superblock cannot be recognized).

Fixes: 10f966bbf5 ("f2fs: use generic EFSBADCRC/EFSCORRUPTED")
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-28 22:59:14 -07:00
Darrick J. Wong
2e616d9f9c xfs: fix stack contents leakage in the v1 inumber ioctls
Explicitly initialize the onstack structures to zero so we don't leak
kernel memory into userspace when converting the in-core inumbers
structure to the v1 inogrp ioctl structure.  Add a comment about why we
have to use memset to ensure that the padding holes in the structures
are set to zero.

Fixes: 5f19c7fc68 ("xfs: introduce v5 inode group structure")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
2019-07-28 21:12:32 -07:00
Andy Shevchenko
21be848ebc extcon: axp288: Use for_each_set_bit() in axp288_extcon_log_rsi()
This simplifies and standardizes axp288_extcon_log_rsi()
by using for_each_set_bit() library function.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-29 10:24:14 +09:00
Andy Shevchenko
d72e3dc791 extcon: axp288: Add missed error check
It seems from the very beginning the error check has been missed
in axp288_extcon_log_rsi(). Add it here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
2019-07-29 10:23:46 +09:00
Masahiro Yamada
622445541b kbuild: detect missing "WITH Linux-syscall-note" for uapi headers
UAPI headers licensed under GPL are supposed to have exception
"WITH Linux-syscall-note" so that they can be included into non-GPL
user space application code.

Unfortunately, people often miss to add it. Break 'make headers'
when any of exported headers lacks the exception note so that the
0-day bot can easily catch it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-07-29 10:05:41 +09:00
Eric Biggers
8a1d0f9cac fs-verity: add data verification hooks for ->readpages()
Add functions that verify data pages that have been read from a
fs-verity file, against that file's Merkle tree.  These will be called
from filesystems' ->readpage() and ->readpages() methods.

Since data verification can block, a workqueue is provided for these
methods to enqueue verification work from their bio completion callback.

See the "Verifying data" section of
Documentation/filesystems/fsverity.rst for more information.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-28 16:59:16 -07:00
Eric Biggers
c1d9b584e2 fs-verity: add the hook for file ->setattr()
Add a function fsverity_prepare_setattr() which filesystems that support
fs-verity must call to deny truncates of verity files.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-28 16:59:16 -07:00
Eric Biggers
fd2d1acfca fs-verity: add the hook for file ->open()
Add the fsverity_file_open() function, which prepares an fs-verity file
to be read from.  If not already done, it loads the fs-verity descriptor
from the filesystem and sets up an fsverity_info structure for the inode
which describes the Merkle tree and contains the file measurement.  It
also denies all attempts to open verity files for writing.

This commit also begins the include/linux/fsverity.h header, which
declares the interface between fs/verity/ and filesystems.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-28 16:59:16 -07:00
Eric Biggers
5585f2af73 fs-verity: add inode and superblock fields
Analogous to fs/crypto/, add fields to the VFS inode and superblock for
use by the fs/verity/ support layer:

- ->s_vop: points to the fsverity_operations if the filesystem supports
  fs-verity, otherwise is NULL.

- ->i_verity_info: points to cached fs-verity information for the inode
  after someone opens it, otherwise is NULL.

- S_VERITY: bit in ->i_flags that identifies verity inodes, even when
  they haven't been opened yet and thus still have NULL ->i_verity_info.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-28 16:59:16 -07:00
Eric Biggers
671e67b47e fs-verity: add Kconfig and the helper functions for hashing
Add the beginnings of the fs/verity/ support layer, including the
Kconfig option and various helper functions for hashing.  To start, only
SHA-256 is supported, but other hash algorithms can easily be added.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-28 16:59:16 -07:00
Eric Biggers
fe9918d3b2 fs: uapi: define verity bit for FS_IOC_GETFLAGS
Add FS_VERITY_FL to the flags for FS_IOC_GETFLAGS, so that applications
can easily determine whether a file is a verity file at the same time as
they're checking other file flags.  This flag will be gettable only;
FS_IOC_SETFLAGS won't allow setting it, since an ioctl must be used
instead to provide more parameters.

This flag matches the on-disk bit that was already allocated for ext4.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-28 16:59:16 -07:00
Eric Biggers
085771ec14 fs-verity: add UAPI header
Add the UAPI header for fs-verity, including two ioctls:

- FS_IOC_ENABLE_VERITY
- FS_IOC_MEASURE_VERITY

These ioctls are documented in the "User API" section of
Documentation/filesystems/fsverity.rst.

Examples of using these ioctls can be found in fsverity-utils
(https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/fsverity-utils.git).

I've also written xfstests that test these ioctls
(https://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/xfstests-dev.git/log/?h=fsverity).

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-28 16:59:16 -07:00
Eric Biggers
c9570b2ced fs-verity: add MAINTAINERS file entry
fs-verity will be jointly maintained by Eric Biggers and Theodore Ts'o.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-28 16:59:15 -07:00
Eric Biggers
6ff2deb2e8 fs-verity: add a documentation file
Add a documentation file for fs-verity, covering:

- Introduction
- Use cases
- User API
    - FS_IOC_ENABLE_VERITY
    - FS_IOC_MEASURE_VERITY
    - FS_IOC_GETFLAGS
- Accessing verity files
- File measurement computation
    - Merkle tree
    - fs-verity descriptor
- Built-in signature verification
- Filesystem support
    - ext4
    - f2fs
- Implementation details
    - Verifying data
        - Pagecache
        - Block device based filesystems
- Userspace utility
- Tests
- FAQ

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-28 16:59:15 -07:00
Michael Ellerman
cee3536d24 powerpc: Wire up clone3 syscall
Wire up the new clone3 syscall added in commit 7f192e3cd3 ("fork:
add clone3").

This requires a ppc_clone3 wrapper, in order to save the non-volatile
GPRs before calling into the generic syscall code. Otherwise we hit
the BUG_ON in CHECK_FULL_REGS in copy_thread().

Lightly tested using Christian's test code on a Power8 LE VM.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Christian Brauner <christian@brauner.io>
Link: https://lore.kernel.org/r/20190724140259.23554-1-mpe@ellerman.id.au
2019-07-29 09:34:27 +10:00
Chris Packham
d95da99338 gpiolib: Preserve desc->flags when setting state
desc->flags may already have values set by of_gpiochip_add() so make
sure that this isn't undone when setting the initial direction.

Cc: stable@vger.kernel.org
Fixes: 3edfb7bd76 ("gpiolib: Show correct direction from the beginning")
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Link: https://lore.kernel.org/r/20190707203558.10993-1-chris.packham@alliedtelesis.co.nz
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29 00:57:39 +02:00
Andrew Jeffery
674fa8daa8 pinctrl: aspeed-g5: Delay acquisition of regmaps
While sorting out some devicetree issues I found that the pinctrl driver
was failing to acquire its GFX regmap even though the phandle was
present in the devicetree:

    [    0.124190] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: No GFX phandle found, some mux configurations may fail

Without access to the GFX regmap we fail to configure the mux for the
VPO function:

    [    1.548866] pinctrl core: add 1 pinctrl maps
    [    1.549826] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: found group selector 164 for VPO
    [    1.550638] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 144 (V20) for 1e6e6000.display
    [    1.551346] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 145 (U19) for 1e6e6000.display
    ...
    [    1.562057] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 218 (T22) for 1e6e6000.display
    [    1.562541] aspeed-g5-pinctrl 1e6e2000.syscon:pinctrl: request pin 219 (R20) for 1e6e6000.display
    [    1.563113] Muxing pin 144 for VPO
    [    1.563456] Want SCU8C[0x00000001]=0x1, got 0x0 from 0x00000000
    [    1.564624] aspeed_gfx 1e6e6000.display: Error applying setting, reverse things back

This turned out to be a simple problem of timing: The ASPEED pinctrl
driver is probed during arch_initcall(), while GFX is processed much
later. As such the GFX syscon is not yet registered during the pinctrl
probe() and we get an -EPROBE_DEFER when we try to look it up, however
we must not defer probing the pinctrl driver for the inability to mux
some GFX-related functions.

Switch to lazily grabbing the regmaps when they're first required by the
mux configuration. This generates a bit of noise in the patch as we have
to drop the `const` qualifier on arguments for several function
prototypes, but has the benefit of working.

I've smoke tested this for the ast2500-evb under qemu with a dummy
graphics device. We now succeed in our attempts to configure the SoC's
VPO pinmux function.

Fixes: 7d29ed88ac ("pinctrl: aspeed: Read and write bits in LPC and GFX controllers")
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20190724080155.12209-1-andrew@aj.id.au
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29 00:52:51 +02:00
Linus Walleij
0ce242ad2e pinctrl: qcom: Pass irqchip when adding gpiochip
We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip.

For chained irqchips this is a pretty straight-forward
conversion.

Cc: Thierry Reding <treding@nvidia.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Co-developed-by: Lina Iyer <ilina@codeaurora.org>
Link: https://lore.kernel.org/r/20190724083828.7496-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29 00:43:25 +02:00
Luca Ceresoli
b3a2b13601 docs/pinctrl: fix compile errors in example code
The code in the example does not build for a few trivial errors: type
mismatch in callback, missing semicolon. Fix them to help newcomers using
the example as a starting point.

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Link: https://lore.kernel.org/r/20190705143043.1929-1-luca@lucaceresoli.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29 00:20:09 +02:00
Bartosz Golaszewski
a299726da4 gpio: max77650: add MODULE_ALIAS()
Define a MODULE_ALIAS() in the gpio sub-driver for max77650 so that
the appropriate module gets loaded together with the core mfd driver.

Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Link: https://lore.kernel.org/r/20190703084601.9276-1-brgl@bgdev.pl
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-29 00:03:52 +02:00
Linus Walleij
f626d6dfb7 gpio: of: Break out OF-only code
The core gpiolib should not contain any OF/device tree-only
code. Try to break out the main part of it and push it down
into the optional gpiolib-of.c part of the library.

Create a local gpiolib-of.h header and move stuff around a
bit to get a clean cut.

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190717071001.3858-1-linus.walleij@linaro.org
2019-07-28 23:07:59 +02:00
Linus Walleij
238644ce4b gpio fixes for v5.3-rc3
- fix for user space handling of active-low flag for GPIO events
 - fix the stubs for gpiolib: don't WARN() on NULL gpio descriptors
   if gpiolib is not compiled
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEFp3rbAvDxGAT0sefEacuoBRx13IFAl09fRQACgkQEacuoBRx
 13JpABAAnjWM0OamV7+zKellg9ooXbArZJf8Y6hWm8/scTxz1Xbhvw8mCfw4SBeJ
 UHmKMoYN6D3trYIYvgIh2Lv8fUrzn7Iry2zQEoxcgiVNDDElRneap+Bh6+qkg9NC
 ndf2/eClwNqOxzsLd5tJ+9Fo1t2BlS/XeDcrqmL34YIQgbuqmNEQoLf8qip9C/C4
 5r1SF64HK9Y2//Tod1q+kvn2Oka6uFz8WnKd+Nm3xoLPFlbva+SvDexLLa98ICMp
 V9dh05ABvgUNhrpSiRr/7SwWC7gjAqPMjq/l2PF8QBZIR7Kl9y59mo+E0dJBImJz
 CgGdLFETEcTkb8mbRsS3gqS2a552uUCkstGXxAcnNM89AD1ZZWqusLUpF/kwWGDZ
 V559HQIEAIH7/XhGOlKqzLuCP0ntA+PCbOde+/NCkQf3LA/XUWjGllstjL5PAOmT
 qeYjCsz8RWaK5HhsxcS7pBuGvyhqYsWczZf+JGbz9gnyHjWWbBwA9qXr7eJCUH2m
 WLWR+5/UWtb4qf//H0G7IYWugd6NdcCvfeRdUXW4ZPH12N8HvP+98g4d+kgvoM9d
 2QwmAHuT4YS+N2rlgmxoH1f5VuRGITtb+TVCCYbWPg/J5Zs8hqrb3if0oI2mTqn+
 sP6RWWokPOnWtQ3HEbLGgLMe8QRJVU4bUH9AHJnp1YMvezl2MQQ=
 =fq2y
 -----END PGP SIGNATURE-----

Merge tag 'gpio-v5.3-rc3-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux into fixes

gpio fixes for v5.3-rc3

- fix for user space handling of active-low flag for GPIO events
- fix the stubs for gpiolib: don't WARN() on NULL gpio descriptors
  if gpiolib is not compiled
2019-07-28 23:04:19 +02:00
Thomas Gleixner
7a30bdd99f Merge branch master from git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
Pick up the spectre documentation so the Grand Schemozzle can be added.
2019-07-28 22:22:40 +02:00
Linus Torvalds
609488bc97 Linux 5.3-rc2 v5.3-rc2 2019-07-28 12:47:02 -07:00
Thomas Gleixner
f36cf386e3 x86/speculation/swapgs: Exclude ATOMs from speculation through SWAPGS
Intel provided the following information:

 On all current Atom processors, instructions that use a segment register
 value (e.g. a load or store) will not speculatively execute before the
 last writer of that segment retires. Thus they will not use a
 speculatively written segment value.

That means on ATOMs there is no speculation through SWAPGS, so the SWAPGS
entry paths can be excluded from the extra LFENCE if PTI is disabled.

Create a separate bug flag for the through SWAPGS speculation and mark all
out-of-order ATOMs and AMD/HYGON CPUs as not affected. The in-order ATOMs
are excluded from the whole mitigation mess anyway.

Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Tyler Hicks <tyhicks@canonical.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
2019-07-28 21:39:55 +02:00
Linus Torvalds
c622fc5f54 meminit fix
- Disable gcc-based stack variable auto-init under KASAN (Arnd Bergmann)
 -----BEGIN PGP SIGNATURE-----
 Comment: Kees Cook <kees@outflux.net>
 
 iQJKBAABCgA0FiEEpcP2jyKd1g9yPm4TiXL039xtwCYFAl099MsWHGtlZXNjb29r
 QGNocm9taXVtLm9yZwAKCRCJcvTf3G3AJr6GD/0Xl/YxeXPnKIHoafoqMCBAY12f
 OnRZ2N6YCikYfLwgBnTAAyQi3P0qU8ffjt4LjoPxzByUPBmZ+VkUBXU1eNUuU0mT
 4CX+ZakeWp5atbg7Ja7DAThBrJS4DYRzXiGB1Is8IACD/zkkRDoGU1tN+3nubtlk
 F2SYtmJBz/6pje2ksLDmuSS1sapaom7Cs4khB/oDb8HOsqydS0CpzN7Oa/Di3HoZ
 yUbyM3bcgmYECasGt7zVOLzr/EcI4T7rtLhMTnFBMbfckQJBPc7UpaLTt9pxMVqO
 Vo7SH/q8atmp3aThT3XbEYbSvx4kUdHZYcuMogPe8T+3Bx4i9gWGnmpqF94P0Kl8
 SZgY92JEhF92PwVTi7ztAfAZQDunVm60c/Lp44r0q/lGQKZLXP8jQXd7KmL6dnPI
 gDnispJnNdNxVSVDx/r3yjSRh0VCA3yv01ed/pusCrxX48sEw7ExwswEJBy12O3s
 rUY7Xx/U+eIP+E+4B7ddlzTFy+0t6HQ0q0LLtbiim1ELF+8ZBnAvCMnm49SQbpEQ
 UMgO/bCAGkGu88uR3sclIwUbaR9oCCxkZO0YuLvAnGoMJ7JaYQlDmDqe/lWP7VjV
 HEmJxDpJE9SgmVtYkfz3aOEds5nSspRQOQfQpnq/JxjRQTSfriSpDpl72d5qk1CH
 WHAM8lviqVg/uT6r2Q==
 =z0XP
 -----END PGP SIGNATURE-----

Merge tag 'meminit-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux

Pull structleak fix from Kees Cook:
 "Disable gcc-based stack variable auto-init under KASAN (Arnd
  Bergmann).

  This fixes a bunch of build warnings under KASAN and the
  gcc-plugin-based stack auto-initialization features (which are
  arguably redundant, so better to let KASAN control this)"

* tag 'meminit-v5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  structleak: disable STRUCTLEAK_BYREF in combination with KASAN_STACK
2019-07-28 12:33:15 -07:00
Linus Torvalds
8e61ea11c2 Kbuild fixes for v5.3
- add compile_commands.json to .gitignore
 
  - fix false-positive warning from gen_compile_commands.py after
    allnoconfig build
 
  - remove unused code
 -----BEGIN PGP SIGNATURE-----
 
 iQJSBAABCgA8FiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl09uOgeHHlhbWFkYS5t
 YXNhaGlyb0Bzb2Npb25leHQuY29tAAoJED2LAQed4NsGoEIP/3+yy7XoxR1aHL2g
 qDUBLVhe00rMqjqDTePxZOnCMRmlv2m00pCZzfokqrakbwnY1DyoDR9KP+RRDtwr
 0A3FLNsJXpEAHakGygkL7IMen9q5RqPWoer+AMulnl+GaX0yCeii5OYXZLgmhh/L
 YKTCYiOK7MvCYhSQcUEjgPpm2fQttnp+umynDm4XCqIEnY7pr0edCgK6de4mJc+7
 NEf6TkNsVCe1STCAp0lAuW+vNCjNhJ4ADlD9bV4mwdl1D5eYKaGSLHCEtp3s6QJe
 DXmRGS1NFV49fmKv9YFLdB4ap3B8gW2uQugkAQbeURs813Y5arOZbJ3E6htxh2Wq
 5ATCiEZMCxMQG8HzS0SmvvuWicEAvxseyTWVhVkV2Z1jo1BT8h7W8fifIsKrp0Oo
 fKo0H+f5B6hNv+MlzBIk4yHwEG2I2YygBujfektOK0/IPyQK3qQNRSlXSMdmzFRH
 2Z3ZbYOIXrHg5TohqgIVPtKuKbpGnyIge9Gqq4RqeVXWTgfOzge3B1a5ok3SqoQg
 GCGu6z6w2ch53QmzEOcT30SOQQpAQUNbim80/BYGsANE3myUafpEplqmlpEOVT1g
 yCRDkv26yvi5fuofpI96Yu9hQE/AidyLJZLT32Ow0wMAzpzV778jm3gmNKgyUzlW
 rqKgzYj6kZmpWMiLjTjnIafvdL6R
 =J7xL
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - add compile_commands.json to .gitignore

 - fix false-positive warning from gen_compile_commands.py after
   allnoconfig build

 - remove unused code

* tag 'kbuild-fixes-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: remove unused single-used-m
  gen_compile_commands: lower the entry count threshold
  .gitignore: Add compilation database file
  kbuild: remove unused objectify macro
2019-07-28 10:35:04 -07:00
Linus Torvalds
04ce931889 Char/Misc driver fixes for 5.3-rc2
Here are some small char and misc driver fixes for 5.3-rc2 to resolve
 some reported issues.
 
 Nothing major at all, some binder bugfixes for issues found, some new
 mei device ids, firmware building warning fixes, habanalabs fixes, a few
 other build fixes, and a MAINTAINERS update.
 
 All of these have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXT2L1g8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynVaQCfbYmj0QWJhL5rVvrUOcdXppa3qxgAn1Pi5+hf
 V3OH/1OmAnY8E07HA1Y3
 =qVrq
 -----END PGP SIGNATURE-----

Merge tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.3-rc2 to resolve
  some reported issues.

  Nothing major at all, some binder bugfixes for issues found, some new
  mei device ids, firmware building warning fixes, habanalabs fixes, a
  few other build fixes, and a MAINTAINERS update.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-5.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  test_firmware: fix a memory leak bug
  hpet: Fix division by zero in hpet_time_div()
  eeprom: make older eeprom drivers select NVMEM_SYSFS
  vmw_balloon: Remove Julien from the maintainers list
  fpga-manager: altera-ps-spi: Fix build error
  mei: me: add mule creek canyon (EHL) device ids
  binder: prevent transactions to context manager from its own process.
  binder: Set end of SG buffer area properly.
  firmware: Fix missing inline
  firmware: fix build errors in paged buffer handling code
  habanalabs: don't reset device when getting VRHOT
  habanalabs: use %pad for printing a dma_addr_t
2019-07-28 10:26:10 -07:00