Commit graph

982,081 commits

Author SHA1 Message Date
Thomas Gleixner
521b82fee9 x86/apic: Cleanup the include maze
All of these APIC files include the world and some more. Remove the
unneeded cruft.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105219.342631201@linutronix.de
2019-07-25 16:11:57 +02:00
Thomas Gleixner
cdc86c9d1f x86/apic: Move IPI inlines into ipi.c
No point in having them in an header file.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105219.252225936@linutronix.de
2019-07-25 16:11:57 +02:00
Thomas Gleixner
cc8bf19137 x86/apic: Make apic_pending_intr_clear() more robust
In course of developing shorthand based IPI support issues with the
function which tries to clear eventually pending ISR bits in the local APIC
were observed.

  1) O-day testing triggered the WARN_ON() in apic_pending_intr_clear().

     This warning is emitted when the function fails to clear pending ISR
     bits or observes pending IRR bits which are not delivered to the CPU
     after the stale ISR bit(s) are ACK'ed.

     Unfortunately the function only emits a WARN_ON() and fails to dump
     the IRR/ISR content. That's useless for debugging.

     Feng added spot on debug printk's which revealed that the stale IRR
     bit belonged to the APIC timer interrupt vector, but adding ad hoc
     debug code does not help with sporadic failures in the field.

     Rework the loop so the full IRR/ISR contents are saved and on failure
     dumped.

  2) The loop termination logic is interesting at best.

     If the machine has no TSC or cpu_khz is not known yet it tries 1
     million times to ack stale IRR/ISR bits. What?

     With TSC it uses the TSC to calculate the loop termination. It takes a
     timestamp at entry and terminates the loop when:

     	  (rdtsc() - start_timestamp) >= (cpu_hkz << 10)

     That's roughly one second.

     Both methods are problematic. The APIC has 256 vectors, which means
     that in theory max. 256 IRR/ISR bits can be set. In practice this is
     impossible and the chance that more than a few bits are set is close
     to zero.

     With the pure loop based approach the 1 million retries are complete
     overkill.

     With TSC this can terminate too early in a guest which is running on a
     heavily loaded host even with only a couple of IRR/ISR bits set. The
     reason is that after acknowledging the highest priority ISR bit,
     pending IRRs must get serviced first before the next round of
     acknowledge can take place as the APIC (real and virtualized) does not
     honour EOI without a preceeding interrupt on the CPU. And every APIC
     read/write takes a VMEXIT if the APIC is virtualized. While trying to
     reproduce the issue 0-day reported it was observed that the guest was
     scheduled out long enough under heavy load that it terminated after 8
     iterations.

     Make the loop terminate after 512 iterations. That's plenty enough
     in any case and does not take endless time to complete.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105219.158847694@linutronix.de
2019-07-25 16:11:56 +02:00
Thomas Gleixner
2640da4ccc x86/apic: Soft disable APIC before initializing it
If the APIC was already enabled on entry of setup_local_APIC() then
disabling it soft via the SPIV register makes a lot of sense.

That masks all LVT entries and brings it into a well defined state.

Otherwise previously enabled LVTs which are not touched in the setup
function stay unmasked and might surprise the just booting kernel.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105219.068290579@linutronix.de
2019-07-25 16:11:56 +02:00
Thomas Gleixner
39c89dff9c x86/apic: Invoke perf_events_lapic_init() after enabling APIC
If the APIC is soft disabled then unmasking an LVT entry does not work and
the write is ignored. perf_events_lapic_init() tries to do so.

Move the invocation after the point where the APIC has been enabled.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105218.962517234@linutronix.de
2019-07-25 16:11:56 +02:00
Thomas Gleixner
2591bc4e8d x86/kgbd: Use NMI_VECTOR not APIC_DM_NMI
apic->send_IPI_allbutself() takes a vector number as argument.

APIC_DM_NMI is clearly not a vector number. It's defined to 0x400 which is
outside the vector space.

Use NMI_VECTOR instead as that's what it is intended to be.

Fixes: 82da3ff89d ("x86: kgdb support")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105218.855189979@linutronix.de
2019-07-25 16:11:56 +02:00
Thomas Gleixner
a2df00fd50 Merge branch 'smp/hotplug' into x86/apic
Pick up core changes on which the APIC IPI cleanups and shorthand support
series depends on.
2019-07-25 16:10:19 +02:00
Grzegorz Halat
747d5a1bf2 x86/reboot: Always use NMI fallback when shutdown via reboot vector IPI fails
A reboot request sends an IPI via the reboot vector and waits for all other
CPUs to stop. If one or more CPUs are in critical regions with interrupts
disabled then the IPI is not handled on those CPUs and the shutdown hangs
if native_stop_other_cpus() is called with the wait argument set.

Such a situation can happen when one CPU was stopped within a lock held
section and another CPU is trying to acquire that lock with interrupts
disabled. There are other scenarios which can cause such a lockup as well.

In theory the shutdown should be attempted by an NMI IPI after the timeout
period elapsed. Though the wait loop after sending the reboot vector IPI
prevents this. It checks the wait request argument and the timeout. If wait
is set, which is true for sys_reboot() then it won't fall through to the
NMI shutdown method after the timeout period has finished.

This was an oversight when the NMI shutdown mechanism was added to handle
the 'reboot IPI is not working' situation. The mechanism was added to deal
with stuck panic shutdowns, which do not have the wait request set, so the
'wait request' case was probably not considered.

Remove the wait check from the post reboot vector IPI wait loop and enforce
that the wait loop in the NMI fallback path is invoked even if NMI IPIs are
disabled or the registration of the NMI handler fails. That second wait
loop will then hang if not all CPUs shutdown and the wait argument is set.

[ tglx: Avoid the hard to parse line break in the NMI fallback path,
  	add comments and massage the changelog ]

Fixes: 7d007d21e5 ("x86/reboot: Use NMI to assist in shutting down if IRQ fails")
Signed-off-by: Grzegorz Halat <ghalat@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Don Zickus <dzickus@redhat.com>
Link: https://lkml.kernel.org/r/20190628122813.15500-1-ghalat@redhat.com
2019-07-25 16:09:24 +02:00
Gustavo A. R. Silva
289a2d22b5 perf/x86/intel: Mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warnings:

  arch/x86/events/intel/core.c: In function ‘intel_pmu_init’:
  arch/x86/events/intel/core.c:4959:8: warning: this statement may fall through [-Wimplicit-fallthrough=]
  arch/x86/events/intel/core.c:5008:8: warning: this statement may fall through [-Wimplicit-fallthrough=]

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable -Wimplicit-fallthrough.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190624161913.GA32270@embeddedor
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:57:03 +02:00
Qian Cai
a1dc0446d6 sched/core: Silence a warning in sched_init()
Compiling a kernel with both FAIR_GROUP_SCHED=n and RT_GROUP_SCHED=n
will generate a compiler warning:

  kernel/sched/core.c: In function 'sched_init':
  kernel/sched/core.c:5906:32: warning: variable 'ptr' set but not used

It is unnecessary to have both "alloc_size" and "ptr", so just combine
them.

Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: valentin.schneider@arm.com
Link: https://lkml.kernel.org/r/20190720012319.884-1-cai@lca.pw
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:55:05 +02:00
Juri Lelli
a07db5c086 sched/core: Fix CPU controller for !RT_GROUP_SCHED
On !CONFIG_RT_GROUP_SCHED configurations it is currently not possible to
move RT tasks between cgroups to which CPU controller has been attached;
but it is oddly possible to first move tasks around and then make them
RT (setschedule to FIFO/RR).

E.g.:

  # mkdir /sys/fs/cgroup/cpu,cpuacct/group1
  # chrt -fp 10 $$
  # echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks
  bash: echo: write error: Invalid argument
  # chrt -op 0 $$
  # echo $$ > /sys/fs/cgroup/cpu,cpuacct/group1/tasks
  # chrt -fp 10 $$
  # cat /sys/fs/cgroup/cpu,cpuacct/group1/tasks
  2345
  2598
  # chrt -p 2345
  pid 2345's current scheduling policy: SCHED_FIFO
  pid 2345's current scheduling priority: 10

Also, as Michal noted, it is currently not possible to enable CPU
controller on unified hierarchy with !CONFIG_RT_GROUP_SCHED (if there
are any kernel RT threads in root cgroup, they can't be migrated to the
newly created CPU controller's root in cgroup_update_dfl_csses()).

Existing code comes with a comment saying the "we don't support RT-tasks
being in separate groups". Such comment is however stale and belongs to
pre-RT_GROUP_SCHED times. Also, it doesn't make much sense for
!RT_GROUP_ SCHED configurations, since checks related to RT bandwidth
are not performed at all in these cases.

Make moving RT tasks between CPU controller groups viable by removing
special case check for RT (and DEADLINE) tasks.

Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Reviewed-by: Daniel Bristot de Oliveira <bristot@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: rostedt@goodmis.org
Link: https://lkml.kernel.org/r/20190719063455.27328-1-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:55:05 +02:00
Juri Lelli
710da3c8ea sched/core: Prevent race condition between cpuset and __sched_setscheduler()
No synchronisation mechanism exists between the cpuset subsystem and
calls to function __sched_setscheduler(). As such, it is possible that
new root domains are created on the cpuset side while a deadline
acceptance test is carried out in __sched_setscheduler(), leading to a
potential oversell of CPU bandwidth.

Grab cpuset_rwsem read lock from core scheduler, so to prevent
situations such as the one described above from happening.

The only exception is normalize_rt_tasks() which needs to work under
tasklist_lock and can't therefore grab cpuset_rwsem. We are fine with
this, as this function is only called by sysrq and, if that gets
triggered, DEADLINE guarantees are already gone out of the window
anyway.

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: mathieu.poirier@linaro.org
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-9-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:55:04 +02:00
Juri Lelli
1a763fd7c6 rcu/tree: Call setschedule() gp ktread to SCHED_FIFO outside of atomic region
sched_setscheduler() needs to acquire cpuset_rwsem, but it is currently
called from an invalid (atomic) context by rcu_spawn_gp_kthread().

Fix that by simply moving sched_setscheduler_nocheck() call outside of
the atomic region, as it doesn't actually require to be guarded by
rcu_node lock.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: mathieu.poirier@linaro.org
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-8-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:55:03 +02:00
Juri Lelli
d74b27d63a cgroup/cpuset: Change cpuset_rwsem and hotplug lock order
cpuset_rwsem is going to be acquired from sched_setscheduler() with a
following patch. There are however paths (e.g., spawn_ksoftirqd) in
which sched_scheduler() is eventually called while holding hotplug lock;
this creates a dependecy between hotplug lock (to be always acquired
first) and cpuset_rwsem (to be always acquired after hotplug lock).

Fix paths which currently take the two locks in the wrong order (after
a following patch is applied).

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: mathieu.poirier@linaro.org
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-7-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:55:03 +02:00
Juri Lelli
1243dc518c cgroup/cpuset: Convert cpuset_mutex to percpu_rwsem
Holding cpuset_mutex means that cpusets are stable (only the holder can
make changes) and this is required for fixing a synchronization issue
between cpusets and scheduler core.  However, grabbing cpuset_mutex from
setscheduler() hotpath (as implemented in a later patch) is a no-go, as
it would create a bottleneck for tasks concurrently calling
setscheduler().

Convert cpuset_mutex to be a percpu_rwsem (cpuset_rwsem), so that
setscheduler() will then be able to read lock it and avoid concurrency
issues.

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: mathieu.poirier@linaro.org
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-6-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:55:02 +02:00
Juri Lelli
59d06cea11 sched/deadline: Fix bandwidth accounting at all levels after offline migration
If a task happens to be throttled while the CPU it was running on gets
hotplugged off, the bandwidth associated with the task is not correctly
migrated with it when the replenishment timer fires (offline_migration).

Fix things up, for this_bw, running_bw and total_bw, when replenishment
timer fires and task is migrated (dl_task_offline_migration()).

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: mathieu.poirier@linaro.org
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-5-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:55:02 +02:00
Mathieu Poirier
f9a25f776d cpusets: Rebuild root domain deadline accounting information
When the topology of root domains is modified by CPUset or CPUhotplug
operations information about the current deadline bandwidth held in the
root domain is lost.

This patch addresses the issue by recalculating the lost deadline
bandwidth information by circling through the deadline tasks held in
CPUsets and adding their current load to the root domain they are
associated with.

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
[ Various additional modifications. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: rostedt@goodmis.org
Cc: tj@kernel.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-4-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:55:01 +02:00
Mathieu Poirier
4b211f2b12 sched/core: Streamle calls to task_rq_unlock()
Calls to task_rq_unlock() are done several times in the
__sched_setscheduler() function.  This is fine when only the rq lock needs to be
handled but not so much when other locks come into play.

This patch streamlines the release of the rq lock so that only one
location need to be modified when dealing with more than one lock.

No change of functionality is introduced by this patch.

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-3-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:57 +02:00
Mathieu Poirier
c22645f4c8 sched/topology: Add partition_sched_domains_locked()
Introduce the partition_sched_domains_locked() function by taking
the mutex locking code out of the original function.  That way
the work done by partition_sched_domains_locked() can be reused
without dropping the mutex lock.

No change of functionality is introduced by this patch.

Tested-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: bristot@redhat.com
Cc: claudio@evidence.eu.com
Cc: lizefan@huawei.com
Cc: longman@redhat.com
Cc: luca.abeni@santannapisa.it
Cc: rostedt@goodmis.org
Cc: tommaso.cucinotta@santannapisa.it
Link: https://lkml.kernel.org/r/20190719140000.31694-2-juri.lelli@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:57 +02:00
Viresh Kumar
60e17f5cef sched/fair: Introduce fits_capacity()
The same formula to check utilization against capacity (after
considering capacity_margin) is already used at 5 different locations.

This patch creates a new macro, fits_capacity(), which can be used from
all these locations without exposing the details of it and hence
simplify code.

All the 5 code locations are updated as well to use it..

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/b477ac75a2b163048bdaeb37f57b4c3f04f75a31.1559631700.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:56 +02:00
Wanpeng Li
e0e8d4911e sched/isolation: Prefer housekeeping CPU in local node
In real product setup, there will be houseeking CPUs in each nodes, it
is prefer to do housekeeping from local node, fallback to global online
cpumask if failed to find houseeking CPU from local node.

Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1561711901-4755-2-git-send-email-wanpengli@tencent.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:55 +02:00
Yi Wang
65d74e9169 sched/stats: Fix unlikely() use of sched_info_on()
sched_info_on() is called with unlikely hint, however, the test
is to be a constant(1) on which compiler will do nothing when
make defconfig, so remove the hint.

Also, fix a lack of {}.

Signed-off-by: Yi Wang <wang.yi59@zte.com.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: up2wing@gmail.com
Cc: wang.liang82@zte.com.cn
Cc: xue.zhihong@zte.com.cn
Link: https://lkml.kernel.org/r/1562301307-43002-1-git-send-email-wang.yi59@zte.com.cn
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:55 +02:00
Matthew Wilcox (Oracle)
7b3c92b85a sched/core: Convert get_task_struct() to return the task
Returning the pointer that was passed in allows us to write
slightly more idiomatic code.  Convert a few users.

Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190704221323.24290-1-willy@infradead.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:54 +02:00
Viresh Kumar
3c29e651e1 sched/fair: Fall back to sched-idle CPU if idle CPU isn't found
We try to find an idle CPU to run the next task, but in case we don't
find an idle CPU it is better to pick a CPU which will run the task the
soonest, for performance reason.

A CPU which isn't idle but has only SCHED_IDLE activity queued on it
should be a good target based on this criteria as any normal fair task
will most likely preempt the currently running SCHED_IDLE task
immediately. In fact, choosing a SCHED_IDLE CPU over a fully idle one
shall give better results as it should be able to run the task sooner
than an idle CPU (which requires to be woken up from an idle state).

This patch updates both fast and slow paths with this optimization.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: chris.redpath@arm.com
Cc: quentin.perret@linaro.org
Cc: songliubraving@fb.com
Cc: steven.sistare@oracle.com
Cc: subhra.mazumdar@oracle.com
Cc: tkjos@google.com
Link: https://lkml.kernel.org/r/eeafa25fdeb6f6edd5b2da716bc8f0ba7708cbcf.1561523542.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:54 +02:00
Viresh Kumar
43e9f7f231 sched/fair: Start tracking SCHED_IDLE tasks count in cfs_rq
Track how many tasks are present with SCHED_IDLE policy in each cfs_rq.
This will be used by later commits.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: chris.redpath@arm.com
Cc: quentin.perret@linaro.org
Cc: songliubraving@fb.com
Cc: steven.sistare@oracle.com
Cc: subhra.mazumdar@oracle.com
Cc: tkjos@google.com
Link: https://lkml.kernel.org/r/0d3cdc427fc68808ad5bccc40e86ed0bf9da8bb4.1561523542.git.viresh.kumar@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:53 +02:00
Paul E. McKenney
84ec3a0787 time/tick-broadcast: Fix tick_broadcast_offline() lockdep complaint
time/tick-broadcast: Fix tick_broadcast_offline() lockdep complaint

The TASKS03 and TREE04 rcutorture scenarios produce the following
lockdep complaint:

	WARNING: inconsistent lock state
	5.2.0-rc1+ #513 Not tainted
	--------------------------------
	inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage.
	migration/1/14 [HC0[0]:SC0[0]:HE1:SE1] takes:
	(____ptrval____) (tick_broadcast_lock){?...}, at: tick_broadcast_offline+0xf/0x70
	{IN-HARDIRQ-W} state was registered at:
	  lock_acquire+0xb0/0x1c0
	  _raw_spin_lock_irqsave+0x3c/0x50
	  tick_broadcast_switch_to_oneshot+0xd/0x40
	  tick_switch_to_oneshot+0x4f/0xd0
	  hrtimer_run_queues+0xf3/0x130
	  run_local_timers+0x1c/0x50
	  update_process_times+0x1c/0x50
	  tick_periodic+0x26/0xc0
	  tick_handle_periodic+0x1a/0x60
	  smp_apic_timer_interrupt+0x80/0x2a0
	  apic_timer_interrupt+0xf/0x20
	  _raw_spin_unlock_irqrestore+0x4e/0x60
	  rcu_nocb_gp_kthread+0x15d/0x590
	  kthread+0xf3/0x130
	  ret_from_fork+0x3a/0x50
	irq event stamp: 171
	hardirqs last  enabled at (171): [<ffffffff8a201a37>] trace_hardirqs_on_thunk+0x1a/0x1c
	hardirqs last disabled at (170): [<ffffffff8a201a53>] trace_hardirqs_off_thunk+0x1a/0x1c
	softirqs last  enabled at (0): [<ffffffff8a264ee0>] copy_process.part.56+0x650/0x1cb0
	softirqs last disabled at (0): [<0000000000000000>] 0x0

        [...]

To reproduce, run the following rcutorture test:

 $ tools/testing/selftests/rcutorture/bin/kvm.sh --duration 5 --kconfig "CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_PROVE_LOCKING=y" --configs "TASKS03 TREE04"

It turns out that tick_broadcast_offline() was an innocent bystander.
After all, interrupts are supposed to be disabled throughout
take_cpu_down(), and therefore should have been disabled upon entry to
tick_offline_cpu() and thus to tick_broadcast_offline().  This suggests
that one of the CPU-hotplug notifiers was incorrectly enabling interrupts,
and leaving them enabled on return.

Some debugging code showed that the culprit was sched_cpu_dying().
It had irqs enabled after return from sched_tick_stop().  Which in turn
had irqs enabled after return from cancel_delayed_work_sync().  Which is a
wrapper around __cancel_work_timer().  Which can sleep in the case where
something else is concurrently trying to cancel the same delayed work,
and as Thomas Gleixner pointed out on IRC, sleeping is a decidedly bad
idea when you are invoked from take_cpu_down(), regardless of the state
you leave interrupts in upon return.

Code inspection located no reason why the delayed work absolutely
needed to be canceled from sched_tick_stop():  The work is not
bound to the outgoing CPU by design, given that the whole point is
to collect statistics without disturbing the outgoing CPU.

This commit therefore simply drops the cancel_delayed_work_sync() from
sched_tick_stop().  Instead, a new ->state field is added to the tick_work
structure so that the delayed-work handler function sched_tick_remote()
can avoid reposting itself.  A cpu_is_offline() check is also added to
sched_tick_remote() to avoid mucking with the state of an offlined CPU
(though it does appear safe to do so).  The sched_tick_start() and
sched_tick_stop() functions also update ->state, and sched_tick_start()
also schedules the delayed work if ->state indicates that it is not
already in flight.

Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
[ paulmck: Apply Peter Zijlstra and Frederic Weisbecker atomics feedback. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190625165238.GJ26519@linux.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:53 +02:00
Vincent Guittot
f6cad8df6b sched/fair: Fix imbalance due to CPU affinity
The load_balance() has a dedicated mecanism to detect when an imbalance
is due to CPU affinity and must be handled at parent level. In this case,
the imbalance field of the parent's sched_group is set.

The description of sg_imbalanced() gives a typical example of two groups
of 4 CPUs each and 4 tasks each with a cpumask covering 1 CPU of the first
group and 3 CPUs of the second group. Something like:

	{ 0 1 2 3 } { 4 5 6 7 }
	        *     * * *

But the load_balance fails to fix this UC on my octo cores system
made of 2 clusters of quad cores.

Whereas the load_balance is able to detect that the imbalanced is due to
CPU affinity, it fails to fix it because the imbalance field is cleared
before letting parent level a chance to run. In fact, when the imbalance is
detected, the load_balance reruns without the CPU with pinned tasks. But
there is no other running tasks in the situation described above and
everything looks balanced this time so the imbalance field is immediately
cleared.

The imbalance field should not be cleared if there is no other task to move
when the imbalance is detected.

Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1561996022-28829-1-git-send-email-vincent.guittot@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:52 +02:00
Valentin Schneider
9434f9f5d1 sched/fair: Change task_numa_work() storage to static
There are no callers outside of fair.c.

Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: mgorman@suse.de
Cc: riel@surriel.com
Link: https://lkml.kernel.org/r/20190715102508.32434-4-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:52 +02:00
Valentin Schneider
b34920d4ce sched/fair: Move task_numa_work() init to init_numa_balancing()
We only need to set the callback_head worker function once, do it
during sched_fork().

While at it, move the comment regarding double task_work addition to
init_numa_balancing(), since the double add sentinel is first set there.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: mgorman@suse.de
Cc: riel@surriel.com
Link: https://lkml.kernel.org/r/20190715102508.32434-3-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:51 +02:00
Valentin Schneider
d35927a144 sched/fair: Move init_numa_balancing() below task_numa_work()
To reference task_numa_work() from within init_numa_balancing(), we
need the former to be declared before the latter. Do just that.

This is a pure code movement.

Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: mgorman@suse.de
Cc: riel@surriel.com
Link: https://lkml.kernel.org/r/20190715102508.32434-2-valentin.schneider@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:51:51 +02:00
Thomas Gleixner
0c09ab96fc cpu/hotplug: Cache number of online CPUs
Re-evaluating the bitmap wheight of the online cpus bitmap in every
invocation of num_online_cpus() over and over is a pretty useless
exercise. Especially when num_online_cpus() is used in code paths
like the IPI delivery of x86 or the membarrier code.

Cache the number of online CPUs in the core and just return the cached
variable. The accessor function provides only a snapshot when used without
protection against concurrent CPU hotplug.

The storage needs to use an atomic_t because the kexec and reboot code
(ab)use set_cpu_online() in their 'shutdown' handlers without any form of
serialization as pointed out by Mathieu. Regular CPU hotplug usage is
properly serialized.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907091622590.1634@nanos.tec.linutronix.de
2019-07-25 15:48:01 +02:00
Thomas Gleixner
b9fa6442f7 cpumask: Implement cpumask_or_equal()
The IPI code of x86 needs to evaluate whether the target cpumask is equal
to the cpu_online_mask or equal except for the calling CPU.

To replace the current implementation which requires the usage of a
temporary cpumask, which might involve allocations, add a new function
which compares a cpumask to the result of two other cpumasks which are
or'ed together before comparison.

This allows to make the required decision in one go and the calling code
then can check for the calling CPU being set in the target mask with
cpumask_test_cpu().

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105220.585449120@linutronix.de
2019-07-25 15:47:37 +02:00
Thomas Gleixner
e797bda3fd smp/hotplug: Track booted once CPUs in a cpumask
The booted once information which is required to deal with the MCE
broadcast issue on X86 correctly is stored in the per cpu hotplug state,
which is perfectly fine for the intended purpose.

X86 needs that information for supporting NMI broadcasting via shortcuts,
but retrieving it from per cpu data is cumbersome.

Move it to a cpumask so the information can be checked against the
cpu_present_mask quickly.

No functional change intended.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20190722105219.818822855@linutronix.de
2019-07-25 15:47:37 +02:00
Bart Van Assche
8c779229d0 locking/lockdep: Report more stack trace statistics
Report the number of stack traces and the number of stack trace hash
chains. These two numbers are useful because these allow to estimate
the number of stack trace hash collisions.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20190722182443.216015-5-bvanassche@acm.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:43:28 +02:00
Bart Van Assche
12593b7467 locking/lockdep: Reduce space occupied by stack traces
Although commit 669de8bda8 ("kernel/workqueue: Use dynamic lockdep keys
for workqueues") unregisters dynamic lockdep keys when a workqueue is
destroyed, a side effect of that commit is that all stack traces
associated with the lockdep key are leaked when a workqueue is destroyed.
Fix this by storing each unique stack trace once. Other changes in this
patch are:

- Use NULL instead of { .nr_entries = 0 } to represent 'no trace'.
- Store a pointer to a stack trace in struct lock_class and struct
  lock_list instead of storing 'nr_entries' and 'offset'.

This patch avoids that the following program triggers the "BUG:
MAX_STACK_TRACE_ENTRIES too low!" complaint:

	#include <fcntl.h>
	#include <unistd.h>

	int main()
	{
		for (;;) {
			int fd = open("/dev/infiniband/rdma_cm", O_RDWR);
			close(fd);
		}
	}

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Reported-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Yuyang Du <duyuyang@gmail.com>
Link: https://lkml.kernel.org/r/20190722182443.216015-4-bvanassche@acm.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:43:27 +02:00
Bart Van Assche
a297042164 stacktrace: Constify 'entries' arguments
Make it clear to humans and to the compiler that the stack trace
('entries') arguments are not modified.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20190722182443.216015-3-bvanassche@acm.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:43:26 +02:00
Bart Van Assche
364f6afc4f locking/lockdep: Make it clear that what lock_class::key points at is not modified
This patch does not change the behavior of the lockdep code.

Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://lkml.kernel.org/r/20190722182443.216015-2-bvanassche@acm.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:43:26 +02:00
Leonard Crestez
4ce54af8b3 perf/core: Fix creating kernel counters for PMUs that override event->cpu
Some hardware PMU drivers will override perf_event.cpu inside their
event_init callback. This causes a lockdep splat when initialized through
the kernel API:

 WARNING: CPU: 0 PID: 250 at kernel/events/core.c:2917 ctx_sched_out+0x78/0x208
 pc : ctx_sched_out+0x78/0x208
 Call trace:
  ctx_sched_out+0x78/0x208
  __perf_install_in_context+0x160/0x248
  remote_function+0x58/0x68
  generic_exec_single+0x100/0x180
  smp_call_function_single+0x174/0x1b8
  perf_install_in_context+0x178/0x188
  perf_event_create_kernel_counter+0x118/0x160

Fix this by calling perf_install_in_context with event->cpu, just like
perf_event_open

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Frank Li <Frank.li@nxp.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Link: https://lkml.kernel.org/r/c4ebe0503623066896d7046def4d6b1e06e0eb2e.1563972056.git.leonard.crestez@nxp.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:41:31 +02:00
Zhenzhong Duan
5ea3f6fb37 perf/x86: Apply more accurate check on hypervisor platform
check_msr is used to fix a bug report in guest where KVM doesn't support
LBR MSR and cause #GP.

The msr check is bypassed on real HW to workaround a false failure,
see commit d0e1a507bd ("perf/x86/intel: Disable check_msr for real HW")

When running a guest with CONFIG_HYPERVISOR_GUEST not set or "nopv"
enabled, current check isn't enough and #GP could trigger.

Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/1564022366-18293-1-git-send-email-zhenzhong.duan@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:41:30 +02:00
Yunying Sun
3b238a64c3 perf/x86/intel: Fix invalid Bit 13 for Icelake MSR_OFFCORE_RSP_x register
The Intel SDM states that bit 13 of Icelake's MSR_OFFCORE_RSP_x
register is valid, and used for counting hardware generated prefetches
of L3 cache. Update the bitmask to allow bit 13.

Before:
$ perf stat -e cpu/event=0xb7,umask=0x1,config1=0x1bfff/u sleep 3
 Performance counter stats for 'sleep 3':
   <not supported>      cpu/event=0xb7,umask=0x1,config1=0x1bfff/u

After:
$ perf stat -e cpu/event=0xb7,umask=0x1,config1=0x1bfff/u sleep 3
 Performance counter stats for 'sleep 3':
             9,293      cpu/event=0xb7,umask=0x1,config1=0x1bfff/u

Signed-off-by: Yunying Sun <yunying.sun@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Cc: alexander.shishkin@linux.intel.com
Cc: bp@alien8.de
Cc: hpa@zytor.com
Cc: jolsa@redhat.com
Cc: namhyung@kernel.org
Link: https://lkml.kernel.org/r/20190724082932.12833-1-yunying.sun@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:41:30 +02:00
Kan Liang
3d0c395360 perf/x86/intel: Fix SLOTS PEBS event constraint
Sampling SLOTS event and ref-cycles event in a group on Icelake gives
EINVAL.

SLOTS event is the event stands for the fixed counter 3, not fixed
counter 2. Wrong mask was set to SLOTS event in
intel_icl_pebs_event_constraints[].

Reported-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 6017608936 ("perf/x86/intel: Add Icelake support")
Link: https://lkml.kernel.org/r/20190723200429.8180-1-kan.liang@linux.intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:41:29 +02:00
Sebastian Andrzej Siewior
6c11c6e3d5 locking/mutex: Test for initialized mutex
An uninitialized/ zeroed mutex will go unnoticed because there is no
check for it. There is a magic check in the unlock's slowpath path which
might go unnoticed if the unlock happens in the fastpath.

Add a ->magic check early in the mutex_lock() and mutex_trylock() path.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190703092125.lsdf4gpsh2plhavb@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:39:27 +02:00
Arnd Bergmann
30a35f79fa locking/lockdep: Clean up #ifdef checks
As Will Deacon points out, CONFIG_PROVE_LOCKING implies TRACE_IRQFLAGS,
so the conditions I added in the previous patch, and some others in the
same file can be simplified by only checking for the former.

No functional change.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Yuyang Du <duyuyang@gmail.com>
Fixes: 886532aee3 ("locking/lockdep: Move mark_lock() inside CONFIG_TRACE_IRQFLAGS && CONFIG_PROVE_LOCKING")
Link: https://lkml.kernel.org/r/20190628102919.2345242-1-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:39:26 +02:00
Arnd Bergmann
68037aa782 locking/lockdep: Hide unused 'class' variable
The usage is now hidden in an #ifdef, so we need to move
the variable itself in there as well to avoid this warning:

  kernel/locking/lockdep_proc.c:203:21: error: unused variable 'class' [-Werror,-Wunused-variable]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qian Cai <cai@lca.pw>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yuyang Du <duyuyang@gmail.com>
Cc: frederic@kernel.org
Fixes: 68d41d8c94 ("locking/lockdep: Fix lock used or unused stats error")
Link: https://lkml.kernel.org/r/20190715092809.736834-1-arnd@arndb.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:39:25 +02:00
Peter Zijlstra
6ffddfb9e1 locking/rwsem: Add ACQUIRE comments
Since we just reviewed read_slowpath for ACQUIRE correctness, add a
few coments to retain our findings.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:39:25 +02:00
Peter Zijlstra
952041a863 tty/ldsem, locking/rwsem: Add missing ACQUIRE to read_failed sleep loop
While reviewing rwsem down_slowpath, Will noticed ldsem had a copy of
a bug we just found for rwsem.

  X = 0;

  CPU0			CPU1

  rwsem_down_read()
    for (;;) {
      set_current_state(TASK_UNINTERRUPTIBLE);

                        X = 1;
                        rwsem_up_write();
                          rwsem_mark_wake()
                            atomic_long_add(adjustment, &sem->count);
                            smp_store_release(&waiter->task, NULL);

      if (!waiter.task)
        break;

      ...
    }

  r = X;

Allows 'r == 0'.

Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 4898e640ca ("tty: Add timed, writer-prioritized rw semaphore")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:39:24 +02:00
Peter Zijlstra
99143f82a2 lcoking/rwsem: Add missing ACQUIRE to read_slowpath sleep loop
While reviewing another read_slowpath patch, both Will and I noticed
another missing ACQUIRE, namely:

  X = 0;

  CPU0			CPU1

  rwsem_down_read()
    for (;;) {
      set_current_state(TASK_UNINTERRUPTIBLE);

                        X = 1;
                        rwsem_up_write();
                          rwsem_mark_wake()
                            atomic_long_add(adjustment, &sem->count);
                            smp_store_release(&waiter->task, NULL);

      if (!waiter.task)
        break;

      ...
    }

  r = X;

Allows 'r == 0'.

Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:39:24 +02:00
Jan Stancek
e1b98fa316 locking/rwsem: Add missing ACQUIRE to read_slowpath exit when queue is empty
LTP mtest06 has been observed to occasionally hit "still mapped when
deleted" and following BUG_ON on arm64.

The extra mapcount originated from pagefault handler, which handled
pagefault for vma that has already been detached. vma is detached
under mmap_sem write lock by detach_vmas_to_be_unmapped(), which
also invalidates vmacache.

When the pagefault handler (under mmap_sem read lock) calls
find_vma(), vmacache_valid() wrongly reports vmacache as valid.

After rwsem down_read() returns via 'queue empty' path (as of v5.2),
it does so without an ACQUIRE on sem->count:

  down_read()
    __down_read()
      rwsem_down_read_failed()
        __rwsem_down_read_failed_common()
          raw_spin_lock_irq(&sem->wait_lock);
          if (list_empty(&sem->wait_list)) {
            if (atomic_long_read(&sem->count) >= 0) {
              raw_spin_unlock_irq(&sem->wait_lock);
              return sem;

The problem can be reproduced by running LTP mtest06 in a loop and
building the kernel (-j $NCPUS) in parallel. It does reproduces since
v4.20 on arm64 HPE Apollo 70 (224 CPUs, 256GB RAM, 2 nodes). It
triggers reliably in about an hour.

The patched kernel ran fine for 10+ hours.

Signed-off-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Will Deacon <will@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dbueso@suse.de
Fixes: 4b486b535c ("locking/rwsem: Exit read lock slowpath if queue empty & no writer")
Link: https://lkml.kernel.org/r/50b8914e20d1d62bb2dee42d342836c2c16ebee7.1563438048.git.jstancek@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:39:23 +02:00
Waiman Long
7813430057 locking/rwsem: Don't call owner_on_cpu() on read-owner
For writer, the owner value is cleared on unlock. For reader, it is
left intact on unlock for providing better debugging aid on crash dump
and the unlock of one reader may not mean the lock is free.

As a result, the owner_on_cpu() shouldn't be used on read-owner
as the task pointer value may not be valid and it might have
been freed. That is the case in rwsem_spin_on_owner(), but not in
rwsem_can_spin_on_owner(). This can lead to use-after-free error from
KASAN. For example,

  BUG: KASAN: use-after-free in rwsem_down_write_slowpath
  (/home/miguel/kernel/linux/kernel/locking/rwsem.c:669
  /home/miguel/kernel/linux/kernel/locking/rwsem.c:1125)

Fix this by checking for RWSEM_READER_OWNED flag before calling
owner_on_cpu().

Reported-by: Luis Henriques <lhenriques@suse.com>
Tested-by: Luis Henriques <lhenriques@suse.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: huang ying <huang.ying.caritas@gmail.com>
Fixes: 94a9717b3c ("locking/rwsem: Make rwsem->owner an atomic_long_t")
Link: https://lkml.kernel.org/r/81e82d5b-5074-77e8-7204-28479bbe0df0@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:39:22 +02:00
Jann Horn
cb361d8cde sched/fair: Use RCU accessors consistently for ->numa_group
The old code used RCU annotations and accessors inconsistently for
->numa_group, which can lead to use-after-frees and NULL dereferences.

Let all accesses to ->numa_group use proper RCU helpers to prevent such
issues.

Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Fixes: 8c8a743c50 ("sched/numa: Use {cpu, pid} to create task groups for shared faults")
Link: https://lkml.kernel.org/r/20190716152047.14424-3-jannh@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-07-25 15:37:05 +02:00