Commit graph

982,081 commits

Author SHA1 Message Date
Fabio Estevam
24c8ac8901 media: i2c: ov5640: Fix the order for enabling regulators
According to the OV5640 datasheet the following sequence needs to be
followed when powering the OV5640 supplies:

- DOVDD
- AVDD
- DVDD

So follow this order inside the ov5640_supply_name[] array, so that
the regulator_bulk() functions can enable the regulator in the
correct sequence.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:37:14 -04:00
Fabio Estevam
8791a102ce media: i2c: ov5640: Check for devm_gpiod_get_optional() error
The power down and reset GPIO are optional, but the return value
from devm_gpiod_get_optional() needs to be checked and propagated
in the case of error, so that probe deferral can work.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:36:53 -04:00
Fabio Estevam
4962bb38fb media: ov5645: Use regulator_bulk() functions
The code can be simplified by using the regulator_bulk() functions,
so switch to it.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:36:03 -04:00
Fabio Estevam
45ffbd15ed media: ov5645: Remove unneeded regulator_set_voltage()
There is no need to call regulator_set_voltage() for each regulator
that powers the camera.

The voltage value for each regulator should be retrieved from the
device tree, so remove the unneeded regulator_set_voltage().

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:35:36 -04:00
Hans Verkuil
f61c0ca4b4 media: vivid: fix typo: use -> user
Fix typo in two comments.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:33:32 -04:00
Arnd Bergmann
4ee2224067 media: staging: davinci: remove vpfe driver
The davinci_vpfe driver was merged into staging back in 2012 by Manjunath
Hadli from TI, with a long TODO list.

For all I can tell, since then it has only seen fixes for compile-time
issues and global cleanups, but nobody has actually worked on the items
on the TODO list.

To make things worse, the driver in its current form is incompatible with
the platform code in arch/arm/mach-davinci, i.e. the driver expects to
get its platform_data passed to the device as a 'struct vpfe_config',
but uses a differnet definition for that structure compared to what the
platform uses.

Finally, there is another driver for the same device in
drivers/media/platform/davinci/vpfe_capture.c. From all I can tell, the
staging version was originally a copy of a more featureful driver in TI's
downstream kernels. However, that kernel no longer supports dm365 after
linux-2.6.37, and the mainline version moved in a different direction.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:33:14 -04:00
Hans Verkuil
757c2bf597 media: staging/media/bcm2048: remove driver
This driver has seen no substantial effort to move it out of
staging for 6 years. And after asking around nobody stepped up
to do the remaining work. So remove it.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:31:59 -04:00
Guillaume Tucker
79e85d1d2c media: vivid: fix device init when no_error_inj=1 and fb disabled
Add an extra condition to add the video output control class when the
device has some hdmi outputs defined.  This is required to then always
be able to add the display present control, which is enabled when
there are some hdmi outputs.

This fixes the corner case where no_error_inj is enabled and the
device has no frame buffer but some hdmi outputs, as otherwise the
video output control class would be added anyway.  Without this fix,
the sanity checks fail in v4l2_ctrl_new() as name is NULL.

Fixes: c533435ffb ("media: vivid: add display present control")
Cc: stable@vger.kernel.org # for 5.3
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:31:30 -04:00
Hans Verkuil
8baf501099 media: am437x: remove unused struct vpfe_pixel_format
struct vpfe_pixel_format was defined, but never used. Remove it.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:31:11 -04:00
Hans Verkuil
ee484875af media: davinci/vpfe_capture.c: drop unused format descriptions
Simplify vpfe_pixel_format to just contain the pixelformat and bpp fields.
All others are unused.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:30:00 -04:00
Hans Verkuil
610fce5372 media: sh_veu: convert to struct v4l2_fh
This driver didn't use struct v4l2_fh, so add it.

This is a very basic conversion. I can't test this on real hardware,
so I didn't dare to also convert the driver to start using the
v4l2-mem2mem ioctl/fop helpers.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:29:26 -04:00
Hans Verkuil
3c1350501c media: v4l2-dev/ioctl: require non-zero device_caps, verify sane querycap results
Now that all V4L2 drivers set device_caps in struct video_device, we can add
a check for this to ensure all future drivers fill this in.

Also verify that when the querycap ioctl is called the driver didn't mess
with the device_caps value and that capabilities is a superset of device_caps.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
[hverkuil-cisco@xs4all.nl: fix too-long line]
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:28:51 -04:00
Lubomir Rintel
08aac0e32f media: marvell-ccic: mmp: add MODULE_DEVICE_TABLE
This fixes autoloading the module by the OF compatible string.

Fixes: 83c40e6611 ("media: marvell-ccic/mmp: add devicetree support")
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:27:14 -04:00
Ezequiel Garcia
173f6eacc8 media: v4l: ctrls: Add debug messages
Currently, the v4l2 control code is a bit silent on errors.
Add debug messages on (hopefully) most of the error paths.

Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:26:49 -04:00
Dmitry Osipenko
156a599b07 dmaengine: tegra-apb: Support per-burst residue granularity
Tegra's APB DMA engine updates words counter after each transferred burst
of data, hence it can report transfer's residual with more fidelity which
may be required in cases like audio playback. In particular this fixes
audio stuttering during playback in a chromium web browser. The patch is
based on the original work that was made by Ben Dooks and a patch from
downstream kernel. It was tested on Tegra20 and Tegra30 devices.

Link: https://lore.kernel.org/lkml/20190424162348.23692-1-ben.dooks@codethink.co.uk/
Link: https://nv-tegra.nvidia.com/gitweb/?p=linux-4.4.git;a=commit;h=c7bba40c6846fbf3eaad35c4472dcc7d8bbc02e5
Inspired-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20190705150519.18171-1-digetx@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-07-25 15:55:51 +05:30
Luke Nowakowski-Krijger
d4a6a9537b media: hdpvr: Add device num check and handling
Add hdpvr device num check and error handling

We need to increment the device count atomically before we checkout a
device to make sure that we do not reach the max count, otherwise we get
out-of-bounds errors as reported by syzbot.

Reported-and-tested-by: syzbot+aac8d0d7205f112045d2@syzkaller.appspotmail.com

Signed-off-by: Luke Nowakowski-Krijger <lnowakow@eng.ucsd.edu>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:23:35 -04:00
Joe Perches
9e037bdf74 media: staging: media: cedrus: Fix misuse of GENMASK macro
Arguments are supposed to be ordered high then low.

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:23:08 -04:00
Niklas Söderlund
21a816e7ee media: rcar-vin: Centralize black listing of pixel formats
Instead of scattering black listing of pixel formats who are not
supported on particular platforms move it to a central location.

Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:22:43 -04:00
Thomas Gleixner
643d83f0a3 x86/hpet: Undo the early counter is counting check
Rui reported that on a Pentium D machine which has HPET forced enabled
because it is not advertised by ACPI, the early counter is counting check
leads to a silent boot hang.

The reason is that the ordering of checking the counter first and then
reconfiguring the HPET fails to work on that machine. As the HPET is not
advertised and presumably not initialized by the BIOS the early enable and
the following reconfiguration seems to bring it into a broken state. Adding
clocksource=jiffies to the command line results in the following
clocksource watchdog warning:

  clocksource: timekeeping watchdog on CPU1:
  Marking clocksource 'tsc-early' as unstable because the skew is too large:
  clocksource:  'hpet' wd_now: 33 wd_last: 33 mask: ffffffff

That clearly shows that the HPET is not counting after it got reconfigured
and reenabled. If the counter is not working then the HPET timer is not
expiring either, which explains the boot hang.

Move the counter is counting check after the full configuration again to
unbreak these systems.

Reported-by: Rui Salvaterra <rsalvaterra@gmail.com>
Fixes: 3222daf970 ("x86/hpet: Separate counter check out of clocksource register code")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Rui Salvaterra <rsalvaterra@gmail.com>
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1907250810530.1791@nanos.tec.linutronix.de
2019-07-25 12:21:32 +02:00
Niklas Söderlund
0bd465765f media: rcar-vin: Clean up correct notifier in error path
The parallel input initialization error path cleans up the wrong
async notifier, fix this by cleaning up the correct notifier.

Fixes: 9863bc8695 ("media: rcar-vin: Cleanup notifier in error path")
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:20:58 -04:00
Dmitry Osipenko
78b3e86b5a media: dt: bindings: tegra-vde: Document new optional IOMMU property
All NVIDIA Tegra SoC generations provide IOMMU support for the video
decoder engine. Document new optional device-tree property that connects
VDE with the IOMMU provider.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-25 06:20:01 -04:00
Linus Walleij
4a2b8560e3 tty: serial: netx: Delete driver
The Netx ARM machine was deleted from the kernel. This driver
had no users and has to go.

Cc: Robert Schwebel <r.schwebel@pengutronix.de>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20190722065146.4844-1-linus.walleij@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 12:05:28 +02:00
Christophe Kerello
978946e428 ARM: dts: stm32: enable FMC2 NAND controller on stm32mp157c-ev1
This patch enables FMC2 NAND controller used on stm32mp157c-ev1.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-07-25 12:05:23 +02:00
Christophe Kerello
52ded6f9ce ARM: dts: stm32: add FMC2 NAND controller pins muxing on stm32mp157c-ev1
This patch adds FMC2 NAND controller pins muxing used on stm32mp157c-ev1.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-07-25 12:05:09 +02:00
Christophe Kerello
aafa0ae335 ARM: dts: stm32: add FMC2 NAND controller support on stm32mp157c
This patch adds FMC2 NAND controller support used by stm32mp157c SOC.

Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-07-25 12:04:37 +02:00
Olivier Moysan
6b72c7a98b drm/bridge: sii902x: make audio mclk optional
The master clock on i2s bus is not mandatory,
as sii902X internal PLL can be used instead.
Make use of mclk optional.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1563811560-29589-4-git-send-email-olivier.moysan@st.com
2019-07-25 12:03:59 +02:00
Olivier Moysan
512ec50a97 dt-bindings: display: sii902x: Change audio mclk binding
As stated in SiL9022/24 datasheet, master clock is not required for I2S.
Make mclk property optional in DT bindings.

Fixes: 3f18021f43 ("dt-bindings: display: sii902x: Add HDMI audio bindings")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1563811560-29589-3-git-send-email-olivier.moysan@st.com
2019-07-25 12:03:43 +02:00
Olivier Moysan
365d28c92f drm/bridge: sii902x: fix missing reference to mclk clock
Add devm_clk_get call to retrieve reference to master clock.

Fixes: ff5781634c ("drm/bridge: sii902x: Implement HDMI audio support")

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
Reviewed-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Andrzej Hajda <a.hajda@samsung.com
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1563811560-29589-2-git-send-email-olivier.moysan@st.com
2019-07-25 12:02:38 +02:00
Ahmad Fatoum
8fabc9c310 drm/stm: attach gem fence to atomic state
To properly synchronize with other devices the fence from the GEM
object backing the framebuffer needs to be attached to the atomic
state, so the commit work can wait on fence signaling.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Philippe Cornu <philippe.cornu@st.com>
Tested-by: Philippe Cornu <philippe.cornu@st.com>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190712084228.8338-1-l.stach@pengutronix.de
2019-07-25 12:00:09 +02:00
Ludovic Barre
2fa278e32b ARM: dts: stm32: activate dma for qspi on stm32mp157
This patch activates dma for qspi on stm32mp157.

Signed-off-by: Ludovic Barre <ludovic.barre@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
2019-07-25 11:31:38 +02:00
Mathias Nyman
d39b5bad86 xhci: Fix crash if scatter gather is used with Immediate Data Transfer (IDT).
A second regression was found in the immediate data transfer (IDT)
support which was added to 5.2 kernel

IDT is used to transfer small amounts of data (up to 8 bytes) in the
field normally used for data dma address, thus avoiding dma mapping.

If the data was not already dma mapped, then IDT support assumed data was
in urb->transfer_buffer, and did not take into accound that even
small amounts of data (8 bytes) can be in a scatterlist instead.

This caused a NULL pointer dereference when sg_dma_len() was used
with non-dma mapped data.

Solve this by not using IDT if scatter gather buffer list is used.

Fixes: 33e39350eb ("usb: xhci: add Immediate Data Transfer support")
Cc: <stable@vger.kernel.org> # v5.2
Reported-by: Maik Stohn <maik.stohn@seal-one.com>
Tested-by: Maik Stohn <maik.stohn@seal-one.com>
CC: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/1564044861-1445-1-git-send-email-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:26:42 +02:00
Lucas Stach
4849ee6129 usb: usb251xb: Reallow swap-dx-lanes to apply to the upstream port
This is a partial revert of 73d31def1a "usb: usb251xb: Create a ports
field collector method", which broke a existing devicetree
(arch/arm64/boot/dts/freescale/imx8mq.dtsi).

There is no reason why the swap-dx-lanes property should not apply to
the upstream port. The reason given in the breaking commit was that it's
inconsitent with respect to other port properties, but in fact it is not.
All other properties which only apply to the downstream ports explicitly
reject port 0, so there is pretty strong precedence that the driver
referred to the upstream port as port 0. So there is no inconsistency in
this property at all, other than the swapping being also applicable to
the upstream port.

CC: stable@vger.kernel.org #5.2
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20190719084407.28041-3-l.stach@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:16:19 +02:00
Lucas Stach
79f6fafad4 Revert "usb: usb251xb: Add US port lanes inversion property"
This property isn't needed and not yet used anywhere. The swap-dx-lanes
property is perfectly fine for doing the swap on the upstream port
lanes.

CC: stable@vger.kernel.org #5.2
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20190719084407.28041-2-l.stach@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:16:19 +02:00
Lucas Stach
bafe64e5f0 Revert "usb: usb251xb: Add US lanes inversion dts-bindings"
This reverts commit 3342ce35a1, as there is no need for this separate
property and it breaks compatibility with existing devicetree files
(arch/arm64/boot/dts/freescale/imx8mq.dtsi).

CC: stable@vger.kernel.org #5.2
Fixes: 3342ce35a1 ("usb: usb251xb: Add US lanes inversion dts-bindings")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Link: https://lore.kernel.org/r/20190719084407.28041-1-l.stach@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:16:19 +02:00
Chunfeng Yun
34d0545978 dt-bindings: usb: mtu3: fix typo of DMA clock name
Fix typo of dma_ck

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/5e06482a0be15476c7b5825f155accf98275afa8.1560246390.git.chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:12:58 +02:00
Colin Ian King
ed7fe55157 usb: chipidea: udc: remove redundant assignment to variable retval
The variable retval is being initialized with a value that is never
read and it is being updated later with a new value. The
initialization is redundant and can be removed.  Also remove a blank
line.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190704150341.759-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:10:55 +02:00
Ruslan Bilovol
6269e4c76e usb: host: xhci-hub: fix extra endianness conversion
Don't do extra cpu_to_le32 conversion for
put_unaligned_le32 because it is already implemented
in this function.

Fixes sparse error:
xhci-hub.c:1152:44: warning: incorrect type in argument 1 (different base types)
xhci-hub.c:1152:44:    expected unsigned int [usertype] val
xhci-hub.c:1152:44:    got restricted __le32 [usertype]

Fixes: 395f540 "xhci: support new USB 3.1 hub request to get extended port status"
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com>
Link: https://lore.kernel.org/r/1562501839-26522-1-git-send-email-ruslan.bilovol@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:10:55 +02:00
Fuqian Huang
3114bc89c0 usb: host: Remove call to memset after dma_alloc_coherent
In commit 518a2f1925
("dma-mapping: zero memory returned from dma_alloc_*"),
dma_alloc_coherent has already zeroed the memory.
So memset is not needed.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Link: https://lore.kernel.org/r/20190715032010.7258-1-huangfq.daxian@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:10:54 +02:00
Masahiro Yamada
6443c671d5 usb: host: oxu210hp-hcd: squash oxu210hp.h into oxu210hp-hcd.c
The header, oxu210hp.h is only included from oxu210hp-hcd.c
so squash it.

When I moved the code, I also fixed the following warnings from
scripts/checkpatch.pl:

drivers/usb/host/oxu210hp-hcd.c:117: warning: __packed is preferred over __attribute__((packed))
drivers/usb/host/oxu210hp-hcd.c:196: warning: __packed is preferred over __attribute__((packed))
drivers/usb/host/oxu210hp-hcd.c:221: warning: __packed is preferred over __attribute__((packed))
drivers/usb/host/oxu210hp-hcd.c:266: warning: __aligned(size) is preferred over __attribute__((aligned(size)))
drivers/usb/host/oxu210hp-hcd.c:336: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/usb/host/oxu210hp-hcd.c:354: warning: __aligned(size) is preferred over __attribute__((aligned(size)))
drivers/usb/host/oxu210hp-hcd.c:385: warning: __aligned(size) is preferred over __attribute__((aligned(size)))
drivers/usb/host/oxu210hp-hcd.c:393: warning: __aligned(size) is preferred over __attribute__((aligned(size)))
drivers/usb/host/oxu210hp-hcd.c:429: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/usb/host/oxu210hp-hcd.c:432: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/usb/host/oxu210hp-hcd.c:436: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/usb/host/oxu210hp-hcd.c:451: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/usb/host/oxu210hp-hcd.c:461: warning: Prefer 'unsigned int' to bare use of 'unsigned'
drivers/usb/host/oxu210hp-hcd.c:467: warning: please, no space before tabs

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20190721144909.5295-2-yamada.masahiro@socionext.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:07:42 +02:00
Masahiro Yamada
110f87a6a5 usb: host: oxu210hp-hcd: remove include/linux/oxu210hp.h
struct oxu210hp_platform_data is defined, but not used at all.

$ git grep oxu210hp_platform_data
include/linux/oxu210hp.h:struct oxu210hp_platform_data {

include/linux/oxu210hp.h exists just for defining an unused structure,
so it can go away.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/r/20190721144909.5295-1-yamada.masahiro@socionext.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:07:42 +02:00
Andy Shevchenko
6ce9ba07b1 usb: typec: mux: Switch to use fwnode_property_count_uXX()
Use fwnode_property_count_uXX() directly, that makes code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190723194726.69545-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:07:42 +02:00
Andy Shevchenko
bc7514925c usb: typec: tcpm: Switch to use fwnode_property_count_uXX()
Use use fwnode_property_count_uXX() directly, that makes code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190723193750.69038-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:07:42 +02:00
Andy Shevchenko
41b57327b2 usb: dwc3: Switch to use device_property_count_u32()
Use use device_property_count_u32() directly, that makes code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20190723191704.67945-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:07:41 +02:00
Andy Shevchenko
07e803ec9f usb: dwc2: Switch to use device_property_count_u32()
Use use device_property_count_u32() directly, that makes code neater.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Minas Harutyunyan <hminas@synopsys.com>
Link: https://lore.kernel.org/r/20190723191639.67883-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:07:41 +02:00
Chuhong Yuan
57cd166afc USB: core: hcd-pci: Use dev_get_drvdata where possible
Instead of using to_pci_dev + pci_get_drvdata,
use dev_get_drvdata to make code simpler.

Signed-off-by: Chuhong Yuan <hslester96@gmail.com>
Link: https://lore.kernel.org/r/20190724131838.1931-1-hslester96@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:07:41 +02:00
Masahiro Yamada
0ce38c5f92 iomap: fix Invalid License ID
Detected by:

  $ ./scripts/spdxcheck.py
  fs/iomap/Makefile: 1:27 Invalid License ID: GPL-2.0-or-newer

Fixes: 1c230208f5 ("iomap: start moving code to fs/iomap/")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:05:11 +02:00
Masahiro Yamada
dc3bf49ea3 treewide: remove SPDX "WITH Linux-syscall-note" from kernel-space headers again
The "WITH Linux-syscall-note" exception exists for headers exported to
user space. It is strange to add it to non-exported headers.

Commit 687a3e4d8e ("treewide: remove SPDX "WITH Linux-syscall-note"
from kernel-space headers") did cleanups some months ago, but it looks
like we need to do this periodically.

This patch was generated by the following script:

  git grep -l -e Linux-syscall-note \
    -- :*.h :^arch/*/include/uapi/asm/*.h :^include/uapi/ :^tools |
  while read file
  do
          sed -i -e 's/(\(GPL-[^[:space:]]*\) WITH Linux-syscall-note)/\1/g' \
          -e 's/ WITH Linux-syscall-note//g' $file
  done

I did not commit drivers/staging/android/uapi/ion.h . This header is
not currently exported, but somebody may plan to move it to include/uapi/
when the time comes. I am not sure. Anyway, it will be better to check
the license inconsistency in drivers/staging/android/uapi/.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:05:10 +02:00
Masahiro Yamada
d9c5252295 treewide: add "WITH Linux-syscall-note" to SPDX tag of uapi headers
UAPI headers licensed under GPL are supposed to have exception
"WITH Linux-syscall-note" so that they can be included into non-GPL
user space application code.

The exception note is missing in some UAPI headers.

Some of them slipped in by the treewide conversion commit b24413180f
("License cleanup: add SPDX GPL-2.0 license identifier to files with
no license"). Just run:

  $ git show --oneline b24413180f -- arch/x86/include/uapi/asm/

I believe they are not intentional, and should be fixed too.

This patch was generated by the following script:

  git grep -l --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
    -- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild |
  while read file
  do
          sed -i -e '/[[:space:]]OR[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
          -e '/[[:space:]]or[[:space:]]/s/\(GPL-[^[:space:]]*\)/(\1 WITH Linux-syscall-note)/g' \
          -e '/[[:space:]]OR[[:space:]]/!{/[[:space:]]or[[:space:]]/!s/\(GPL-[^[:space:]]*\)/\1 WITH Linux-syscall-note/g}' $file
  done

After this patch is applied, there are 5 UAPI headers that do not contain
"WITH Linux-syscall-note". They are kept untouched since this exception
applies only to GPL variants.

  $ git grep --not -e Linux-syscall-note --and -e SPDX-License-Identifier \
    -- :arch/*/include/uapi/asm/*.h :include/uapi/ :^*/Kbuild
  include/uapi/drm/panfrost_drm.h:/* SPDX-License-Identifier: MIT */
  include/uapi/linux/batman_adv.h:/* SPDX-License-Identifier: MIT */
  include/uapi/linux/qemu_fw_cfg.h:/* SPDX-License-Identifier: BSD-3-Clause */
  include/uapi/linux/vbox_err.h:/* SPDX-License-Identifier: MIT */
  include/uapi/linux/virtio_iommu.h:/* SPDX-License-Identifier: BSD-3-Clause */

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-07-25 11:05:10 +02:00
Rafael J. Wysocki
fdc7570157 Merge branch 'pm-cpufreq'
* pm-cpufreq:
  cpufreq/pasemi: fix use-after-free in pas_cpufreq_cpu_init()
2019-07-25 10:46:07 +02:00
Noralf Trønnes
f27e43b46d MAINTAINERS: Remove tinydrm entry
tinydrm is just a collection of tiny drivers now.
Add T: drm-misc entry for tinydrm drivers that lacks it.

Cc: David Lechner <david@lechnology.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: David Lechner <david@lechnology.com>
Acked-by: Eric Anholt <eric@anholt.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20190722104312.16184-10-noralf@tronnes.org
2019-07-25 10:45:53 +02:00