Commit graph

982,081 commits

Author SHA1 Message Date
Sahitya Tummala
56659ce838 f2fs: fix is_idle() check for discard type
The discard thread should issue upto dpolicy->max_requests at once
and wait for all those discard requests at once it reaches
dpolicy->max_requests. It should then sleep for dpolicy->min_interval
timeout before issuing the next batch of discard requests. But in the
current code of is_idle(), it checks for dcc_info->queued_discard and
aborts issuing the discard batch of max_requests. This
dcc_info->queued_discard will be true always once one discard command
is issued.

It is thus resulting into this type of discard request pattern -

- Issue discard request#1
- is_idle() returns false, discard thread waits for request#1 and then
  sleeps for min_interval 50ms.
- Issue discard request#2
- is_idle() returns false, discard thread waits for request#2 and then
  sleeps for min_interval 50ms.
- and so on for all other discard requests, assuming f2fs is idle w.r.t
  other conditions.

With this fix, the pattern will look like this -

- Issue discard request#1
- Issue discard request#2
  and so on upto max_requests of 8
- Issue discard request#8
- wait for min_interval 50ms.

Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-02 15:40:42 -07:00
Jaegeuk Kim
db6ec53b7e f2fs: add a rw_sem to cover quota flag changes
Two paths to update quota and f2fs_lock_op:

1.
 - lock_op
 |  - quota_update
 `- unlock_op

2.
 - quota_update
 - lock_op
 `- unlock_op

But, we need to make a transaction on quota_update + lock_op in #2 case.
So, this patch introduces:
1. lock_op
2. down_write
3. check __need_flush
4. up_write
5. if there is dirty quota entries, flush them
6. otherwise, good to go

Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-02 15:40:41 -07:00
Chao Yu
c83414aedf f2fs: set SBI_NEED_FSCK for xattr corruption case
If xattr is corrupted, let's print kernel message and set SBI_NEED_FSCK
for further repair.

Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-02 15:40:41 -07:00
Chao Yu
10f966bbf5 f2fs: use generic EFSBADCRC/EFSCORRUPTED
f2fs uses EFAULT as error number to indicate filesystem is corrupted
all the time, but generic filesystems use EUCLEAN for such condition,
we need to change to follow others.

This patch adds two new macros as below to wrap more generic error
code macros, and spread them in code.

EFSBADCRC	EBADMSG		/* Bad CRC detected */
EFSCORRUPTED	EUCLEAN		/* Filesystem is corrupted */

Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-02 15:40:41 -07:00
Geert Uytterhoeven
f91108b801 f2fs: Use DIV_ROUND_UP() instead of open-coding
Replace the open-coded divisions with round-up by calls to the
DIV_ROUND_UP() helper macro.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-02 15:40:41 -07:00
Chao Yu
2d821c1217 f2fs: print kernel message if filesystem is inconsistent
As Pavel reported, once we detect filesystem inconsistency in
f2fs_inplace_write_data(), it will be better to print kernel message as
we did in other places.

Reported-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-02 15:40:41 -07:00
Joe Perches
dcbb4c10e6 f2fs: introduce f2fs_<level> macros to wrap f2fs_printk()
- Add and use f2fs_<level> macros
- Convert f2fs_msg to f2fs_printk
- Remove level from f2fs_printk and embed the level in the format
- Coalesce formats and align multi-line arguments
- Remove unnecessary duplicate extern f2fs_msg f2fs.h

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-02 15:40:40 -07:00
Chao Yu
8740edc3e5 f2fs: avoid get_valid_blocks() for cleanup
No logic change.

Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-02 15:40:40 -07:00
Qiuyang Sun
04f0b2eaa3 f2fs: ioctl for removing a range from F2FS
This ioctl shrinks a given length (aligned to sections) from end of the
main area. Any cursegs and valid blocks will be moved out before
invalidating the range.

This feature can be used for adjusting partition sizes online.

History of the patch:

Sahitya Tummala:
 - Add this ioctl for f2fs_compat_ioctl() as well.
 - Fix debugfs status to reflect the online resize changes.
 - Fix potential race between online resize path and allocate new data
   block path or gc path.

Others:
 - Rename some identifiers.
 - Add some error handling branches.
 - Clear sbi->next_victim_seg[BG_GC/FG_GC] in shrinking range.
 - Implement this interface as ext4's, and change the parameter from shrunk
bytes to new block count of F2FS.
 - During resizing, force to empty sit_journal and forbid adding new
   entries to it, in order to avoid invalid segno in journal after resize.
 - Reduce sbi->user_block_count before resize starts.
 - Commit the updated superblock first, and then update in-memory metadata
   only when the former succeeds.
 - Target block count must align to sections.
 - Write checkpoint before and after committing the new superblock, w/o
CP_FSCK_FLAG respectively, so that the FS can be fixed by fsck even if
resize fails after the new superblock is committed.
 - In free_segment_range(), reduce granularity of gc_mutex.
 - Add protection on curseg migration.
 - Add freeze_bdev() and thaw_bdev() for resize fs.
 - Remove CUR_MAIN_SECS and use MAIN_SECS directly for allocation.
 - Recover super_block and FS metadata when resize fails.
 - No need to clear CP_FSCK_FLAG in update_ckpt_flags().
 - Clean up the sb and fs metadata update functions for resize_fs.

Geert Uytterhoeven:
 - Use div_u64*() for 64-bit divisions

Arnd Bergmann:
 - Not all architectures support get_user() with a 64-bit argument:
    ERROR: "__get_user_bad" [fs/f2fs/f2fs.ko] undefined!
    Use copy_from_user() here, this will always work.

Signed-off-by: Qiuyang Sun <sunqiuyang@huawei.com>
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2019-07-02 15:39:24 -07:00
Petr Machata
dbcdb61aaf mlxsw: spectrum_ptp: Fix validation in mlxsw_sp1_ptp_packet_finish()
Before mlxsw_sp1_ptp_packet_finish() sends the packet back, it validates
whether the corresponding port is still valid. However the condition is
incorrect: when mlxsw_sp_port == NULL, the code dereferences the port to
compare it to skb->dev.

The condition needs to check whether the port is present and skb->dev still
refers to that port (or else is NULL). If that does not hold, bail out.
Add a pair of parentheses to fix the condition.

Fixes: d92e4e6e33 ("mlxsw: spectrum: PTP: Support timestamping on Spectrum-1")
Reported-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 15:31:20 -07:00
David Howells
99f0eae653 rxrpc: Fix oops in tracepoint
If the rxrpc_eproto tracepoint is enabled, an oops will be cause by the
trace line that rxrpc_extract_header() tries to emit when a protocol error
occurs (typically because the packet is short) because the call argument is
NULL.

Fix this by using ?: to assume 0 as the debug_id if call is NULL.

This can then be induced by:

	echo -e '\0\0\0\0\0\0\0\0' | ncat -4u --send-only <addr> 20001

where addr has the following program running on it:

	#include <stdio.h>
	#include <stdlib.h>
	#include <string.h>
	#include <unistd.h>
	#include <sys/socket.h>
	#include <arpa/inet.h>
	#include <linux/rxrpc.h>
	int main(void)
	{
		struct sockaddr_rxrpc srx;
		int fd;
		memset(&srx, 0, sizeof(srx));
		srx.srx_family			= AF_RXRPC;
		srx.srx_service			= 0;
		srx.transport_type		= AF_INET;
		srx.transport_len		= sizeof(srx.transport.sin);
		srx.transport.sin.sin_family	= AF_INET;
		srx.transport.sin.sin_port	= htons(0x4e21);
		fd = socket(AF_RXRPC, SOCK_DGRAM, AF_INET6);
		bind(fd, (struct sockaddr *)&srx, sizeof(srx));
		sleep(20);
		return 0;
	}

It results in the following oops.

	BUG: kernel NULL pointer dereference, address: 0000000000000340
	#PF: supervisor read access in kernel mode
	#PF: error_code(0x0000) - not-present page
	...
	RIP: 0010:trace_event_raw_event_rxrpc_rx_eproto+0x47/0xac
	...
	Call Trace:
	 <IRQ>
	 rxrpc_extract_header+0x86/0x171
	 ? rcu_read_lock_sched_held+0x5d/0x63
	 ? rxrpc_new_skb+0xd4/0x109
	 rxrpc_input_packet+0xef/0x14fc
	 ? rxrpc_input_data+0x986/0x986
	 udp_queue_rcv_one_skb+0xbf/0x3d0
	 udp_unicast_rcv_skb.isra.8+0x64/0x71
	 ip_protocol_deliver_rcu+0xe4/0x1b4
	 ip_local_deliver+0xf0/0x154
	 __netif_receive_skb_one_core+0x50/0x6c
	 netif_receive_skb_internal+0x26b/0x2e9
	 napi_gro_receive+0xf8/0x1da
	 rtl8169_poll+0x303/0x4c4
	 net_rx_action+0x10e/0x333
	 __do_softirq+0x1a5/0x38f
	 irq_exit+0x54/0xc4
	 do_IRQ+0xda/0xf8
	 common_interrupt+0xf/0xf
	 </IRQ>
	 ...
	 ? cpuidle_enter_state+0x23c/0x34d
	 cpuidle_enter+0x2a/0x36
	 do_idle+0x163/0x1ea
	 cpu_startup_entry+0x1d/0x1f
	 start_secondary+0x157/0x172
	 secondary_startup_64+0xa4/0xb0

Fixes: a25e21f0bc ("rxrpc, afs: Use debug_ids rather than pointers in traces")
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 15:29:57 -07:00
Heiner Kallweit
c782e204f7 r8169: add random MAC address fallback
It was reported that the GPD MicroPC is broken in a way that no valid
MAC address can be read from the network chip. The vendor driver deals
with this by assigning a random MAC address as fallback. So let's do
the same.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 15:28:19 -07:00
Heiner Kallweit
7424edbb55 Revert "r8169: improve handling VLAN tag"
This reverts commit 759d095741.

The patch was based on a misunderstanding. As Al Viro pointed out [0]
it's simply wrong on big endian. So let's revert it.

[0] https://marc.info/?t=156200975600004&r=1&w=2

Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 15:27:33 -07:00
Phong Tran
78226f6eaa net: usb: asix: init MAC address buffers
This is for fixing bug KMSAN: uninit-value in ax88772_bind

Tested by
https://groups.google.com/d/msg/syzkaller-bugs/aFQurGotng4/eB_HlNhhCwAJ

Reported-by: syzbot+8a3fc6674bbc3978ed4e@syzkaller.appspotmail.com

syzbot found the following crash on:

HEAD commit:    f75e4cfe kmsan: use kmsan_handle_urb() in urb.c
git tree:       kmsan
console output: https://syzkaller.appspot.com/x/log.txt?x=136d720ea00000
kernel config:
https://syzkaller.appspot.com/x/.config?x=602468164ccdc30a
dashboard link:
https://syzkaller.appspot.com/bug?extid=8a3fc6674bbc3978ed4e
compiler:       clang version 9.0.0 (/home/glider/llvm/clang
06d00afa61eef8f7f501ebdb4e8612ea43ec2d78)
syz repro:
https://syzkaller.appspot.com/x/repro.syz?x=12788316a00000
C reproducer:   https://syzkaller.appspot.com/x/repro.c?x=120359aaa00000

==================================================================
BUG: KMSAN: uninit-value in is_valid_ether_addr
include/linux/etherdevice.h:200 [inline]
BUG: KMSAN: uninit-value in asix_set_netdev_dev_addr
drivers/net/usb/asix_devices.c:73 [inline]
BUG: KMSAN: uninit-value in ax88772_bind+0x93d/0x11e0
drivers/net/usb/asix_devices.c:724
CPU: 0 PID: 3348 Comm: kworker/0:2 Not tainted 5.1.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Workqueue: usb_hub_wq hub_event
Call Trace:
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0x191/0x1f0 lib/dump_stack.c:113
  kmsan_report+0x130/0x2a0 mm/kmsan/kmsan.c:622
  __msan_warning+0x75/0xe0 mm/kmsan/kmsan_instr.c:310
  is_valid_ether_addr include/linux/etherdevice.h:200 [inline]
  asix_set_netdev_dev_addr drivers/net/usb/asix_devices.c:73 [inline]
  ax88772_bind+0x93d/0x11e0 drivers/net/usb/asix_devices.c:724
  usbnet_probe+0x10f5/0x3940 drivers/net/usb/usbnet.c:1728
  usb_probe_interface+0xd66/0x1320 drivers/usb/core/driver.c:361
  really_probe+0xdae/0x1d80 drivers/base/dd.c:513
  driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
  __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
  bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
  __device_attach+0x454/0x730 drivers/base/dd.c:844
  device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
  bus_probe_device+0x137/0x390 drivers/base/bus.c:514
  device_add+0x288d/0x30e0 drivers/base/core.c:2106
  usb_set_configuration+0x30dc/0x3750 drivers/usb/core/message.c:2027
  generic_probe+0xe7/0x280 drivers/usb/core/generic.c:210
  usb_probe_device+0x14c/0x200 drivers/usb/core/driver.c:266
  really_probe+0xdae/0x1d80 drivers/base/dd.c:513
  driver_probe_device+0x1b3/0x4f0 drivers/base/dd.c:671
  __device_attach_driver+0x5b8/0x790 drivers/base/dd.c:778
  bus_for_each_drv+0x28e/0x3b0 drivers/base/bus.c:454
  __device_attach+0x454/0x730 drivers/base/dd.c:844
  device_initial_probe+0x4a/0x60 drivers/base/dd.c:891
  bus_probe_device+0x137/0x390 drivers/base/bus.c:514
  device_add+0x288d/0x30e0 drivers/base/core.c:2106
  usb_new_device+0x23e5/0x2ff0 drivers/usb/core/hub.c:2534
  hub_port_connect drivers/usb/core/hub.c:5089 [inline]
  hub_port_connect_change drivers/usb/core/hub.c:5204 [inline]
  port_event drivers/usb/core/hub.c:5350 [inline]
  hub_event+0x48d1/0x7290 drivers/usb/core/hub.c:5432
  process_one_work+0x1572/0x1f00 kernel/workqueue.c:2269
  process_scheduled_works kernel/workqueue.c:2331 [inline]
  worker_thread+0x189c/0x2460 kernel/workqueue.c:2417
  kthread+0x4b5/0x4f0 kernel/kthread.c:254
  ret_from_fork+0x35/0x40 arch/x86/entry/entry_64.S:355

Signed-off-by: Phong Tran <tranmanphong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 15:24:48 -07:00
Martin Blumenstingl
cc5e92c223 net: stmmac: make "snps,reset-delays-us" optional again
Commit 760f1dc295 ("net: stmmac: add sanity check to
device_property_read_u32_array call") introduced error checking of the
device_property_read_u32_array() call in stmmac_mdio_reset().
This results in the following error when the "snps,reset-delays-us"
property is not defined in devicetree:
  invalid property snps,reset-delays-us

This sanity check made sense until commit 84ce4d0f9f ("net: stmmac:
initialize the reset delay array") ensured that there are fallback
values for the reset delay if the "snps,reset-delays-us" property is
absent. That was at the cost of making that property mandatory though.

Drop the sanity check for device_property_read_u32_array() and thus make
the "snps,reset-delays-us" property optional again (avoiding the error
message while loading the stmmac driver with a .dtb where the property
is absent).

Fixes: 760f1dc295 ("net: stmmac: add sanity check to device_property_read_u32_array call")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 15:23:43 -07:00
Eric Dumazet
b8bd72d317 bonding/main: fix NULL dereference in bond_select_active_slave()
A bonding master can be up while best_slave is NULL.

[12105.636318] BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
[12105.638204] mlx4_en: eth1: Linkstate event 1 -> 1
[12105.648984] IP: bond_select_active_slave+0x125/0x250
[12105.653977] PGD 0 P4D 0
[12105.656572] Oops: 0000 [#1] SMP PTI
[12105.660487] gsmi: Log Shutdown Reason 0x03
[12105.664620] Modules linked in: kvm_intel loop act_mirred uhaul vfat fat stg_standard_ftl stg_megablocks stg_idt stg_hdi stg elephant_dev_num stg_idt_eeprom w1_therm wire i2c_mux_pca954x i2c_mux mlx4_i2c i2c_usb cdc_acm ehci_pci ehci_hcd i2c_iimc mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core [last unloaded: kvm_intel]
[12105.685686] mlx4_core 0000:03:00.0: dispatching link up event for port 2
[12105.685700] mlx4_en: eth2: Linkstate event 2 -> 1
[12105.685700] mlx4_en: eth2: Link Up (linkstate)
[12105.724452] Workqueue: bond0 bond_mii_monitor
[12105.728854] RIP: 0010:bond_select_active_slave+0x125/0x250
[12105.734355] RSP: 0018:ffffaf146a81fd88 EFLAGS: 00010246
[12105.739637] RAX: 0000000000000003 RBX: ffff8c62b03c6900 RCX: 0000000000000000
[12105.746838] RDX: 0000000000000000 RSI: ffffaf146a81fd08 RDI: ffff8c62b03c6000
[12105.754054] RBP: ffffaf146a81fdb8 R08: 0000000000000001 R09: ffff8c517d387600
[12105.761299] R10: 00000000001075d9 R11: ffffffffaceba92f R12: 0000000000000000
[12105.768553] R13: ffff8c8240ae4800 R14: 0000000000000000 R15: 0000000000000000
[12105.775748] FS:  0000000000000000(0000) GS:ffff8c62bfa40000(0000) knlGS:0000000000000000
[12105.783892] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[12105.789716] CR2: 0000000000000000 CR3: 0000000d0520e001 CR4: 00000000001626f0
[12105.796976] Call Trace:
[12105.799446]  [<ffffffffac31d387>] bond_mii_monitor+0x497/0x6f0
[12105.805317]  [<ffffffffabd42643>] process_one_work+0x143/0x370
[12105.811225]  [<ffffffffabd42c7a>] worker_thread+0x4a/0x360
[12105.816761]  [<ffffffffabd48bc5>] kthread+0x105/0x140
[12105.821865]  [<ffffffffabd42c30>] ? rescuer_thread+0x380/0x380
[12105.827757]  [<ffffffffabd48ac0>] ? kthread_associate_blkcg+0xc0/0xc0
[12105.834266]  [<ffffffffac600241>] ret_from_fork+0x51/0x60

Fixes: e2a7420df2 ("bonding/main: convert to using slave printk macros")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: John Sperbeck <jsperbeck@google.com>
Cc: Jarod Wilson <jarod@redhat.com>
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 15:14:48 -07:00
Rafael J. Wysocki
99465f12ba ACPI: PM: Drop unused function and function header
Remove a leftover function header and a static inline stub with no
users from the ACPI header file.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2019-07-03 00:13:24 +02:00
Rafael J. Wysocki
c95b7595f8 ACPI: PM: Introduce "poweroff" callbacks for ACPI PM domain and LPSS
In general, it is not correct to call pm_generic_suspend(),
pm_generic_suspend_late() and pm_generic_suspend_noirq() during the
hibernation's "poweroff" transition, because device drivers may
provide special callbacks to be invoked then and the wrappers in
question cause system suspend callbacks to be run.  Unfortunately,
that happens in the ACPI PM domain and ACPI LPSS.

To address this potential issue, introduce "poweroff" callbacks
for the ACPI PM and LPSS that will use pm_generic_poweroff(),
pm_generic_poweroff_late() and pm_generic_poweroff_noirq() as
appropriate.

Fixes: 05087360fd (ACPI / PM: Take SMART_SUSPEND driver flag into account)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2019-07-03 00:13:24 +02:00
Rafael J. Wysocki
3cd7957e85 ACPI: PM: Simplify and fix PM domain hibernation callbacks
First, after a previous change causing all runtime-suspended devices
in the ACPI PM domain (and ACPI LPSS devices) to be resumed before
creating a snapshot image of memory during hibernation, it is not
necessary to worry about the case in which them might be left in
runtime-suspend any more, so get rid of the code related to that from
ACPI PM domain and ACPI LPSS hibernation callbacks.

Second, it is not correct to use pm_generic_resume_early() and
acpi_subsys_resume_noirq() in hibernation "restore" callbacks (which
currently happens in the ACPI PM domain and ACPI LPSS), so introduce
proper _restore_late and _restore_noirq callbacks for the ACPI PM
domain and ACPI LPSS.

Fixes: 05087360fd (ACPI / PM: Take SMART_SUSPEND driver flag into account)
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2019-07-03 00:13:24 +02:00
Rafael J. Wysocki
a78ae45a79 PCI: PM: Simplify bus-level hibernation callbacks
After a previous change causing all runtime-suspended PCI devices
to be resumed before creating a snapshot image of memory during
hibernation, it is not necessary to worry about the case in which
them might be left in runtime-suspend any more, so get rid of the
code related to that from bus-level PCI hibernation callbacks.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2019-07-03 00:13:24 +02:00
Rafael J. Wysocki
501debd4aa PM: ACPI/PCI: Resume all devices during hibernation
Both the PCI bus type and the ACPI PM domain avoid resuming
runtime-suspended devices with DPM_FLAG_SMART_SUSPEND set during
hibernation (before creating the snapshot image of system memory),
but that turns out to be a mistake.  It leads to functional issues
and adds complexity that's hard to justify.

For this reason, resume all runtime-suspended PCI devices and all
devices in the ACPI PM domains before creating a snapshot image of
system memory during hibernation.

Fixes: 05087360fd (ACPI / PM: Take SMART_SUSPEND driver flag into account)
Fixes: c4b65157ae (PCI / PM: Take SMART_SUSPEND driver flag into account)
Link: https://lore.kernel.org/linux-acpi/917d4399-2e22-67b1-9d54-808561f9083f@uwyo.edu/T/#maf065fe6e4974f2a9d79f332ab99dfaba635f64c
Reported-by: Robert R. Howell <RHowell@uwyo.edu>
Tested-by: Robert R. Howell <RHowell@uwyo.edu>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
2019-07-03 00:13:24 +02:00
Olof Johansson
2659dc8d22 This set of patches fixes regressions introduced in v5.2 kernel when DA8xx
OHCI driver was converted over to use GPIO regulators.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdG3dJAAoJEGFBu2jqvgRNUdEP/06CH3kwX/VLJjyjG8lpm504
 T8Xr1akrvwjUCtdMy2XFvGfP7Mg8cABIKN8eUqbCjusw4E4mCCh1AMnLoXUtZN1M
 LK/MNQ4WznREu4ZNjj/nqAAfKV/mGB2Ym7GToj57p0C6DXXxXE4GKpD2Tlrpxm8g
 cLk7efyCU5j5/MM9fgWVViV5LEf15tR6jRY4M4FRhZUF0CP/MWsAnrsmZuywIfSi
 ihGrYfdkyhAjgYInCQw3ZMNtUD+0Ohf1QmKkzmHhE7UF5FklBLFY6uOPHdwcYqPL
 ymhToPRquYIAU95vuCXHZRSV5HaeM47yn1SegCeNvSLr0QiEI5+31l9QOAku/dbs
 JLlW4hXeLvsayVF3c27K0QztDTEpv+jYDEJQ2sxjkoJkdJsQZc//tWJObw8cfWlV
 b61gM1bcbYOVQX3uFDdznjreKmdk+6oGhzFAeGY05jIHBL/y+afFYw0U6knolJAy
 p9FisEcI8XdAP2CBxc9W+Yy7YM5/H6Lvx5MmFCWfzOYl+InKL1IyIjNuCXmyjLSr
 WBxnM9Dpry2aaZYY6XN5h1wO34jmIduyQGBQO+n2fsgnBuy4J4i1+SEodZcfeFgv
 FZmLxJVGi/CHs2iypDoa3hU8Ny9/hr5ErN8fSai3a5vDNKML8VEpml+IbA6Xbxe1
 l/PRRsxag7uvJOfoQW6f
 =vwpF
 -----END PGP SIGNATURE-----

Merge tag 'davinci-fixes-for-v5.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/fixes

This set of patches fixes regressions introduced in v5.2 kernel when DA8xx
OHCI driver was converted over to use GPIO regulators.

* tag 'davinci-fixes-for-v5.2-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: da830-evm: fix GPIO lookup for OHCI
  ARM: davinci: omapl138-hawk: add missing regulator constraints for OHCI
  ARM: davinci: da830-evm: add missing regulator constraints for OHCI
  + Linux 5.2-rc7

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-07-02 15:13:20 -07:00
Xin Long
d2c3a4ba25 tipc: remove ub->ubsock checks
Both tipc_udp_enable and tipc_udp_disable are called under rtnl_lock,
ub->ubsock could never be NULL in tipc_udp_disable and cleanup_bearer,
so remove the check.

Also remove the one in tipc_udp_enable by adding "free" label.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 15:13:15 -07:00
Gabriel Krisman Bertazi
96fcaf86c3 ext4: fix coverity warning on error path of filename setup
Fix the following coverity warning reported by Dan Carpenter:

fs/ext4/namei.c:1311 ext4_fname_setup_ci_filename()
	  warn: 'cf_name->len' unsigned <= 0

Fixes: 3ae72562ad ("ext4: optimize case-insensitive lookups")
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
2019-07-02 17:56:12 -04:00
Hans de Goede
8756a25b07 libata: Drop firmware version check from the ST1000LM024 quirk
There are several firmware versions between version 2AR10001 and
2BA30001, presumably these also have broken FPDMA_AA activation, so
lets play it safe and apply the quirk to all firmware versions.

Suggested-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-07-02 15:53:09 -06:00
Kimberly Brown
78e9605d4f ext4: replace ktype default_attrs with default_groups
The kobj_type default_attrs field is being replaced by the
default_groups field. Replace the default_attrs field in ext4_sb_ktype
and ext4_feat_ktype with default_groups. Use the ATTRIBUTE_GROUPS macro
to create ext4_groups and ext4_feat_groups.

Signed-off-by: Kimberly Brown <kimbrownkd@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2019-07-02 17:38:55 -04:00
Marek Majkowski
c4683cd5fb um: Fix kcov crash during startup
Kcov fails to start when compiled with kcov. Disable KCOV on
arch/uml/kernel/skas.

  $ gdb -q -ex r ./vmlinux
  Program received signal SIGSEGV, Segmentation fault.
  check_kcov_mode (t=<>, needed_mode=<>) at kernel/kcov.c:70
  70		mode = READ_ONCE(t->kcov_mode);

Signed-off-by: Marek Majkowski <marek@cloudflare.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-02 23:27:42 +02:00
Krzysztof Kozlowski
80b81cdc66 um: configs: Remove useless UEVENT_HELPER_PATH
Remove the CONFIG_UEVENT_HELPER_PATH because:
1. It is disabled since commit 1be01d4a57 ("driver: base: Disable
   CONFIG_UEVENT_HELPER by default") as its dependency (UEVENT_HELPER) was
   made default to 'n',
2. It is not recommended (help message: "This should not be used today
   [...] creates a high system load") and was kept only for ancient
   userland,
3. Certain userland specifically requests it to be disabled (systemd
   README: "Legacy hotplug slows down the system and confuses udev").

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-02 23:27:41 +02:00
Johannes Berg
065038706f um: Support time travel mode
Sometimes it can be useful to run with "time travel" inside the
UML instance, for example for testing. For example, some tests
for the wireless subsystem and userspace are based on hwsim, a
virtual wireless adapter. Some tests can take a long time to
run because they e.g. wait for 120 seconds to elapse for some
regulatory checks. This obviously goes faster if it need not
actually wait that long, but time inside the test environment
just "bumps up" when there's nothing to do.

Add CONFIG_UML_TIME_TRAVEL_SUPPORT to enable code to support
such modes at runtime, selected on the command line:
 * just "time-travel", in which time inside the UML instance
   can move faster than real time, if there's nothing to do
 * "time-travel=inf-cpu" in which time also moves slower and
   any CPU processing takes no time at all, which allows to
   implement consistent behaviour regardless of host CPU load
   (or speed) or debug overhead.

An additional "time-travel-start=<seconds>" parameter is also
supported in this case to start the wall clock at this time
(in unix epoch).

With this enabled, the test mentioned above goes from a runtime
of about 140 seconds (with startup overhead and all) to being
CPU bound and finishing in 15 seconds (on my slow laptop).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-02 23:27:36 +02:00
Johannes Berg
c7c6f3b953 um: Pass nsecs to os timer functions
This makes the code clearer and lets the time travel patch have
the actual time used for these functions in just one place.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-02 23:27:29 +02:00
Johannes Berg
b00bdd3244 um: Remove drivers/ssl.h
This file just contains two unused prototypes, remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-02 23:27:24 +02:00
Johannes Berg
c7f04e87e4 um: Don't garbage collect in deactivate_all_fds()
My previous commit didn't actually address the whole issue with
lockdep shutdown, I had another local modification that disabled
lockdep but that wasn't sufficient alone, so had to do the other
change.

Another issue remained though - during kfree() we acquire locks
and lockdep tries to annotate those with exactly the same issue
in the other patch - we no longer have "current".

So, just remove the garbage collection. There's no value in it
anyway since we're going to shut down anyway and marking a slab
object as free is now not very useful anymore.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-02 23:27:19 +02:00
Johannes Berg
80bf6ceaf9 um: Silence lockdep complaint about mmap_sem
When we get into activate_mm(), lockdep complains that we're doing
something strange:

    WARNING: possible circular locking dependency detected
    5.1.0-10252-gb00152307319-dirty #121 Not tainted
    ------------------------------------------------------
    inside.sh/366 is trying to acquire lock:
    (____ptrval____) (&(&p->alloc_lock)->rlock){+.+.}, at: flush_old_exec+0x703/0x8d7

    but task is already holding lock:
    (____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7

    which lock already depends on the new lock.

    the existing dependency chain (in reverse order) is:

    -> #1 (&mm->mmap_sem){++++}:
           [...]
           __lock_acquire+0x12ab/0x139f
           lock_acquire+0x155/0x18e
           down_write+0x3f/0x98
           flush_old_exec+0x748/0x8d7
           load_elf_binary+0x2ca/0xddb
           [...]

    -> #0 (&(&p->alloc_lock)->rlock){+.+.}:
           [...]
           __lock_acquire+0x12ab/0x139f
           lock_acquire+0x155/0x18e
           _raw_spin_lock+0x30/0x83
           flush_old_exec+0x703/0x8d7
           load_elf_binary+0x2ca/0xddb
           [...]

    other info that might help us debug this:

     Possible unsafe locking scenario:

           CPU0                    CPU1
           ----                    ----
      lock(&mm->mmap_sem);
                                   lock(&(&p->alloc_lock)->rlock);
                                   lock(&mm->mmap_sem);
      lock(&(&p->alloc_lock)->rlock);

     *** DEADLOCK ***

    2 locks held by inside.sh/366:
     #0: (____ptrval____) (&sig->cred_guard_mutex){+.+.}, at: __do_execve_file+0x12d/0x869
     #1: (____ptrval____) (&mm->mmap_sem){++++}, at: flush_old_exec+0x6c5/0x8d7

    stack backtrace:
    CPU: 0 PID: 366 Comm: inside.sh Not tainted 5.1.0-10252-gb00152307319-dirty #121
    Stack:
     [...]
    Call Trace:
     [<600420de>] show_stack+0x13b/0x155
     [<6048906b>] dump_stack+0x2a/0x2c
     [<6009ae64>] print_circular_bug+0x332/0x343
     [<6009c5c6>] check_prev_add+0x669/0xdad
     [<600a06b4>] __lock_acquire+0x12ab/0x139f
     [<6009f3d0>] lock_acquire+0x155/0x18e
     [<604a07e0>] _raw_spin_lock+0x30/0x83
     [<60151e6a>] flush_old_exec+0x703/0x8d7
     [<601a8eb8>] load_elf_binary+0x2ca/0xddb
     [...]

I think it's because in exec_mmap() we have

	down_read(&old_mm->mmap_sem);
...
        task_lock(tsk);
...
	activate_mm(active_mm, mm);
	(which does down_write(&mm->mmap_sem))

I'm not really sure why lockdep throws in the whole knowledge
about the task lock, but it seems that old_mm and mm shouldn't
ever be the same (and it doesn't deadlock) so tell lockdep that
they're different.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-02 23:27:11 +02:00
Johannes Berg
8eacd6fca4 um: Remove locking in deactivate_all_fds()
Not only does the locking contradict the comment, and as
the comment says is pointless and actually harmful (all
the actual OS threads have exited already), but it also
causes crashes when lockdep is enabled, because calling
into the spinlock calls into lockdep, which then tries
to determine the current task, which no longer exists.

Remove the locking to let UML shut down cleanly in case
lockdep is enabled.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-02 23:27:05 +02:00
Johannes Berg
56fc187065 um: Timer code cleanup
There are some unused functions, and some others that have
unused arguments; clean up the timer code a bit.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-02 23:27:00 +02:00
Johannes Berg
fcd242c6c8 um: fix os_timer_one_shot()
os_timer_one_shot() gets passed a value "unsigned long delta",
so must not have an "int ticks" as that actually ends up being
-1, and thus triggering a timer over and over again.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-02 23:26:57 +02:00
Jouni Malinen
bebe4681d0 um: Fix IRQ controller regression on console read
The conversion of UML to use epoll based IRQ controller claimed that
clone_one_chan() can safely call um_free_irq() while starting to ignore
the delay_free_irq parameter that explicitly noted that the IRQ cannot
be freed because this is being called from chan_interrupt(). This
resulted in free_irq() getting called in interrupt context ("Trying to
free IRQ 6 from IRQ context!").

Fix this by restoring previously used delay_free_irq processing.

Fixes: ff6a17989c ("Epoll based IRQ controller")
Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-02 23:26:52 +02:00
Jack Xiao
ba9e93c5fa drm/amdkfd: remove an unused variable
Just for cleanup.

Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-02 16:14:22 -05:00
David S. Miller
bc389fd101 Merge branch 'macsec-fix-some-bugs-in-the-receive-path'
Andreas Steinmetz says:

====================
macsec: fix some bugs in the receive path

This series fixes some bugs in the receive path of macsec. The first
is a use after free when processing macsec frames with a SecTAG that
has the TCI E bit set but the C bit clear. In the 2nd bug, the driver
leaves an invalid checksumming state after decrypting the packet.

This is a combined effort of Sabrina Dubroca <sd@queasysnail.net> and me.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 14:12:30 -07:00
Andreas Steinmetz
7d8b16b9fa macsec: fix checksumming after decryption
Fix checksumming after decryption.

Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 14:12:29 -07:00
Andreas Steinmetz
095c02da80 macsec: fix use-after-free of skb during RX
Fix use-after-free of skb when rx_handler returns RX_HANDLER_PASS.

Signed-off-by: Andreas Steinmetz <ast@domdv.de>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 14:12:29 -07:00
Stefano Brivio
885b8b4dbb ipv4: Fix off-by-one in route dump counter without netlink strict checking
In commit ee28906fd7 ("ipv4: Dump route exceptions if requested") I
added a counter of per-node dumped routes (including actual routes and
exceptions), analogous to the existing counter for dumped nodes. Dumping
exceptions means we need to also keep track of how many routes are dumped
for each node: this would be just one route per node, without exceptions.

When netlink strict checking is not enabled, we dump both routes and
exceptions at the same time: the RTM_F_CLONED flag is not used as a
filter. In this case, the per-node counter 'i_fa' is incremented by one
to track the single dumped route, then also incremented by one for each
exception dumped, and then stored as netlink callback argument as skip
counter, 's_fa', to be used when a partial dump operation restarts.

The per-node counter needs to be increased by one also when we skip a
route (exception) due to a previous non-zero skip counter, because it
needs to match the existing skip counter, if we are dumping both routes
and exceptions. I missed this, and only incremented the counter, for
regular routes, if the previous skip counter was zero. This means that,
in case of a mixed dump, partial dump operations after the first one
will start with a mismatching skip counter value, one less than expected.

This means in turn that the first exception for a given node is skipped
every time a partial dump operation restarts, if netlink strict checking
is not enabled (iproute < 5.0).

It turns out I didn't repeat the test in its final version, commit
de755a8513 ("selftests: pmtu: Introduce list_flush_ipv4_exception test
case"), which also counts the number of route exceptions returned, with
iproute2 versions < 5.0 -- I was instead using the equivalent of the IPv6
test as it was before commit b964641e99 ("selftests: pmtu: Make
list_flush_ipv6_exception test more demanding").

Always increment the per-node counter by one if we previously dumped
a regular route, so that it matches the current skip counter.

Fixes: ee28906fd7 ("ipv4: Dump route exceptions if requested")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 14:06:47 -07:00
René van Dorst
cce581a0c3 net: ethernet: mediatek: Allow non TRGMII mode with MT7621 DDR2 devices
No reason to error out on a MT7621 device with DDR2 memory when non
TRGMII mode is selected.
Only MT7621 DDR2 clock setup is not supported for TRGMII mode.
But non TRGMII mode doesn't need any special clock setup.

Signed-off-by: René van Dorst <opensource@vdorst.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-02 14:05:44 -07:00
Alex Deucher
843747253b drm/amdgpu/display: fix interrupt client id for navi
All asics newer than vega10 use client ids, so simplify the
check.

Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2019-07-02 15:46:24 -05:00
Maurizio Lombardi
5dd6c49339 scsi: iscsi: set auth_protocol back to NULL if CHAP_A value is not supported
If the CHAP_A value is not supported, the chap_server_open() function
should free the auth_protocol pointer and set it to NULL, or we will leave
a dangling pointer around.

[   66.010905] Unsupported CHAP_A value
[   66.011660] Security negotiation failed.
[   66.012443] iSCSI Login negotiation failed.
[   68.413924] general protection fault: 0000 [#1] SMP PTI
[   68.414962] CPU: 0 PID: 1562 Comm: targetcli Kdump: loaded Not tainted 4.18.0-80.el8.x86_64 #1
[   68.416589] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
[   68.417677] RIP: 0010:__kmalloc_track_caller+0xc2/0x210

Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Chris Leech <cleech@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-02 16:38:35 -04:00
Roman Bolshakov
5676234f20 scsi: target/iblock: Fix overrun in WRITE SAME emulation
WRITE SAME corrupts data on the block device behind iblock if the command
is emulated. The emulation code issues (M - 1) * N times more bios than
requested, where M is the number of 512 blocks per real block size and N is
the NUMBER OF LOGICAL BLOCKS specified in WRITE SAME command. So, for a
device with 4k blocks, 7 * N more LBAs gets written after the requested
range.

The issue happens because the number of 512 byte sectors to be written is
decreased one by one while the real bios are typically from 1 to 8 512 byte
sectors per bio.

Fixes: c66ac9db8d ("[SCSI] target: Add LIO target core v4.0.0-rc6")
Cc: <stable@vger.kernel.org>
Signed-off-by: Roman Bolshakov <r.bolshakov@yadro.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-07-02 16:35:52 -04:00
Linus Walleij
fbbf145a0e gpio/spi: Fix spi-gpio regression on active high CS
I ran into an intriguing bug caused by
commit ""spi: gpio: Don't request CS GPIO in DT use-case"
affecting all SPI GPIO devices with an active high
chip select line.

The commit switches the CS gpio handling over to the GPIO
core, which will parse and handle "cs-gpios" from the OF
node without even calling down to the driver to get the
job done.

However the GPIO core handles the standard bindings in
Documentation/devicetree/bindings/spi/spi-controller.yaml
that specifies that active high CS needs to be specified
using "spi-cs-high" in the DT node.

The code in drivers/spi/spi-gpio.c never respected this
and never tried to inspect subnodes to see if they contained
"spi-cs-high" like the gpiolib OF quirks does. Instead the
only way to get an active high CS was to tag it in the
device tree using the flags cell such as
cs-gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;

This alters the quirks to not inspect the subnodes of SPI
masters on "spi-gpio" for the standard attribute "spi-cs-high",
making old device trees work as expected.

This semantic is a bit ambigous, but just allowing the
flags on the GPIO descriptor to modify polarity is what
the kernel at large mostly uses so let's encourage that.

Fixes: 249e2632dc ("spi: gpio: Don't request CS GPIO in DT use-case")
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: linux-gpio@vger.kernel.org
Cc: linux-spi@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-07-02 22:31:37 +02:00
Chuck Lever
2d0abe36cf xprtrdma: Fix use-after-free in rpcrdma_post_recvs
Dereference wr->next /before/ the memory backing wr has been
released. This issue was found by code inspection. It is not
expected to be a significant problem because it is in an error
path that is almost never executed.

Fixes: 7c8d9e7c88 ("xprtrdma: Move Receive posting to ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-07-02 16:29:21 -04:00
Chuck Lever
10694ac92c xprtrdma: Fix a BUG when tracing is enabled with NFSv4.1 on RDMA
A backchannel reply does not set task->tk_client.

Fixes: 0c77668ddb ("SUNRPC: Introduce trace points in ... ")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-07-02 16:29:21 -04:00
Jason Gunthorpe
c5cfcfcb54 Merge branch 'siw' into rdma.git for-next
Bernard Metzler says:

====================
This patch set contributes the SoftiWarp driver rebased for latest
rdma-next. SoftiWarp (siw) implements the iWarp RDMA protocol over kernel
TCP sockets. The driver integrates with the linux-rdma framework.

A matching userlevel driver is available as PR at
https://github.com/linux-rdma/rdma-core/pull/536

Many thanks for reviewing and testing the driver, especially to Leon,
Jason, Steve, Doug, Olga, Dennis, Gal. You all helped to significantly
improve the driver over the last year.

Please find below a list of changes and comments, compared to older
versions of the siw driver.

Many thanks!
Bernard.

CHANGES:
========

v3 (this version)
-----------------

- Rebased to rdma-next

- Removed unneccessary initialization of enums in siw-abi.h

- Added comment on sizing of all work queues to power of two.

v2
-----------------

- Changed recieve path CRC calculation to compute CRC32c not
  on target buffer after placement, but on original skbuf.
  This change severely hurts performance, if CRC is switched
  on, since skb must now be walked twice. It is planned to
  work on an extension to skb_copy_bits() to fold in CRC
  computation.

- Moved debugging to using ibdev_dbg().

- Dropped detailed packet debug printing.

- Removed siw_debug.[ch] files.

- Removed resource tracking, code now relies on restrack of
  RDMA midlayer. Only object counting to enforce reported
  device limits is left in place.

- Removed all nested switch-case statements.

- Cleaned up header file #include's

- Moved CQ create/destroy to new semantics,
  where midlayer creates/destroys containing object.

- Set siw's ABI version to 1 (was 0 before)

- Removed all enum initialization where not needed.

- Fixed MAINTANERS entry for siw driver

- This version stays with the current siw specific
  management of user memory (siw_umem_get() vs.
  ib_umem_get(), etc.). This, since the current ib_umem
  implementation is less efficient for user page lookup
  on the fast path, where effciency is important for a
  SW RDMA driver.
  It is planned to contribute enhancements to the ib_umem
  framework, wich makes it suitable for SW drivers as well.

v1 (first version after v9 of siw RFC)
--------------------------------------

- Rebased to 5.2-rc1

- All IDR code got removed.

- Both MR and QP deallocation verbs now synchronously
  free the resources referenced by the RDMA mid-layer.

- IPv6 support was added.

- For compatibility with Chelsio iWarp hardware, the RX
  path was slightly reworked. It now allows packet intersection
  between tagged and untagged RDMAP operations. While not
  a defined behavior as of IETF RFC 5040/5041, some RDMA hardware
  may intersect an ongoing outbound (large) tagged message, such
  as an multisegment RDMA Read Response with sending an untagged
  message, such as an RDMA Send frame. This behavior was only
  detected in an NVMeF setup, where siw was used at target side,
  and RDMA hardware at client side (during file write). siw now
  implements two input paths for tagged and untagged messages each,
  and allows the intersected placement of both messages.

- The siw kernel abi file got renamed from siw_user.h to siw-abi.h.
====================

* branch 'siw':
  SIW addition to kernel build environment
  SIW completion queue methods
  SIW receive path
  SIW transmit path
  SIW queue pair methods
  SIW application buffer management
  SIW application interface
  SIW connection management
  SIW network and RDMA core interface
  SIW main include file
  iWarp wire packet format
2019-07-02 17:03:41 -03:00