Commit graph

982,081 commits

Author SHA1 Message Date
Erik Stromdahl
74ee571599 ath10k: add inline wrapper for htt_h2t_aggr_cfg_msg
This is done in order to make the *htt_h2t_aggr_cfg_msg* op align better
with the rest of the htt ops (whom all have inline wrappers).

It also adds support for the case when the op is missing (function
pointer is NULL).

As a result of this, the name of the 32 bit implementation in htt_tx.c
was changed and the function was made static.

Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-06-25 15:47:15 +03:00
Olof Johansson
9060463be5 This pull request has a patch to switch DA850 EVM GPIO LED support to use
GPIO lookup table
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdC02UAAoJEGFBu2jqvgRN0egP/0Yb3kZ+9Yg/ulJraJgrp5zL
 QyPocXaOIuBAFyVX+PHHexCbpGrZg/7RfbOInbhCZvo5n2wTywaOpYNSY9zjdh0w
 NTzt+IGyqWaAnsll9GrgntD7o20EdZrcx9IrD2C9juK+EgF02nQOI7QPXswQJX63
 eC4f6XO3fuS0givF9HHtlsjp+wNgU2T5u/6iI+An+8O0dvPdc7+IuPt9MbNcvupe
 xJg4NR5hWLiRySUBdIZUCgtqlSOd1w2b+MysHjLsBPBssuhTsd2H5G96w3c8p0vk
 MKnLVw7oOerQNSuSIyNWHAr3FipE6smtGTDJbYBh5t8ukya68bv5RifZMMgTP+un
 g6keORxR0MD04c5BGt8X9jTVv0uYsnICX9VG8erZ3Gqreh7zNmZi9sz1PPxvX1O8
 7me4Ayiq+MhjtTS56wGVWjlCc58oE1fiRJ+5HeDhDq/FcScZYqbJMJWvpepLoptu
 NQJFDgerYtV3fOVj3/bRK+QSmVr5+63SsIGB95BP9oQT61lJ5TdrsUWNAgnOO+fX
 kxwvitnWNeZyHUdVSvmaoxcgKNE7X2sRFSm3F1C7o+yJYtCNjJ/H9Fqi7anWms1C
 dSQrHjYFQzKTcx16ZyLYkMx3WkV/M/Gl/+ouImK2gUWfFKb1kJ9IgxBMIy8gWT1L
 U4IcPQPk6OFpaINjUCCZ
 =BF48
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v5.3/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/soc

This pull request has a patch to switch DA850 EVM GPIO LED support to use
GPIO lookup table

* tag 'davinci-for-v5.3/soc' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci: Use GPIO lookup table for DA850 LEDs

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 05:46:44 -07:00
Olof Johansson
21000823f5 i.MX driver changes for 5.3:
- Add i.MX SCU based SoC bus driver for i.MX8QXP SoC support, which
    talks to SCU firmware for getting SoC ID and revision.
  - Update soc-imx8 bus driver to read imx8mm soc revision from anatop.
  - Add i.MX8MN SoC bus support into soc-imx8 driver.
  - Various small improvements on soc-imx8 bus driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdEX9EAAoJEFBXWFqHsHzOixgIAJ5FXbnVlJdoFkfFTOqQpzM5
 w0/dPoJLyZOPd42SU4zTAlj7ooPCN+ux+AvOpf4BOMMZjJ3SnKRccpA7yPrhAAyb
 pjYEGJAB1bLX1B4bnGJy2lHZzZFkGEMo2rK6jUl7agLV0T5HnV0/bRtBePCei8as
 AXO5VhsXqxczG0EwqkwxdLWrvlFNwTtxi9XY90h/Af/tLUwRS4/V0/btE17r/v+2
 FgoCZkHiGt+zfTzDdBSc+sV1MMcSgIGHDVTIRD1x2BfMC3VBng1HZy8aVZL2f5YP
 FvDeP4W91bGSlfztKxZtZI7LLQ5oAJujgJFOvtqaaRQxV8Fk7DsNeSN58c9nRf4=
 =qYcp
 -----END PGP SIGNATURE-----

Merge tag 'imx-drivers-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers

i.MX driver changes for 5.3:
 - Add i.MX SCU based SoC bus driver for i.MX8QXP SoC support, which
   talks to SCU firmware for getting SoC ID and revision.
 - Update soc-imx8 bus driver to read imx8mm soc revision from anatop.
 - Add i.MX8MN SoC bus support into soc-imx8 driver.
 - Various small improvements on soc-imx8 bus driver.

* tag 'imx-drivers-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: Add i.MX8MN SoC driver support
  soc: imx8: Use existing of_root directly
  soc: imx8: Fix potential kernel dump in error path
  soc: imx: soc-imx8: Correct return value of error handle
  soc: imx: soc-imx8: Avoid unnecessary of_node_put() in error handling
  soc: imx: Add SCU SoC info driver support
  soc: imx: Read imx8mm soc revision from anatop

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 05:43:40 -07:00
Olof Johansson
0aa447e5ce ASPEED SoC updates for 5.3
LPC control driver changes and a fix.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAl0N2bQACgkQa3ZZB4FH
 cJ4RoA/+IBClZauu9bGp6kdyGRtcNzjh3DmqIBx7veHqSD9X/+cU6wXw19FBDMps
 CShWgRaCShT/ITG7mIPaY6iiuQKuTOtBQp8S0xBvb+fvoLDHDhZ3BeAEQlg95qWL
 dZpfvhdNIJKGI4ZQsN/QcGJRLA6tooPFmTUS5tpH2ZjY8Rp3EKAm0l/yKfw6qzLx
 WbadEf0oFqpR7Ij35w19WEzT2guZAu5a+CTDudf/AFyOX5aPIKTGoBIKTlbLFsuS
 9gdejjso11IAZsS2rICLAdrmnkJOlJAWmaFxguIdCQGIzlgRyPnH1HtkI0SDfILn
 QddQZRIg31nOU9OBGELk+JMJAkRzM+pkynbbr1mSy4mlExKBow/oLcO9ZSeeWTni
 UiyW+3Duy/3WBDy2tfVEG9+b2df0Ow0hItolcCLKJK5JmqUROOWT82Tq2BiYRpbp
 EQmLYP4e5P2g6X7heUgtJtkL+HL2Wny3h60pv6XYJ63Y4waryXr9u0CmdvKeGv6I
 /YZESY/h/9n8kv6cdKKmV9IW/iiBHKphnqHoQjJpkudyQIoqEPGHFM9GKddOtKVi
 0cHN4cfhITDCKjJH0jt5Ke64JtGfCMpCVzecIPOuJ88xYBetK1CI+tINHVNshUtU
 vrdeo4MpR7uuV8v9nMICEtRImfs/dZGyQc3tl9kv/yDIAbEfdfQ=
 =N3Jm
 -----END PGP SIGNATURE-----

Merge tag 'aspeed-5.3-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/drivers

ASPEED SoC updates for 5.3

LPC control driver changes and a fix.

* tag 'aspeed-5.3-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  soc: aspeed: lpc-ctrl: Fix probe error handling
  soc: aspeed: lpc-ctrl: make parameter optional

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 05:43:16 -07:00
Olof Johansson
761d3d22fb soc: tegra: Changes for v5.3-rc1
This contains a set of minor fixes and cleanups for core Tegra drivers.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl0M61oTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoYZAD/487VTni+jaefO8Vop87r1+nAbQNG9Y
 i+QGdZwBTggHhE7rPKHMPPgmTqjAcTLezyM1kUx7nUF5eK4R/Rz1ND1MzutYt6/v
 vS12SOfclPalZuO6DuR7vwCDeqpLy/WXFt4OZZzm/F/WxTBzc86BvOWSF7LvTXvl
 kAK7TmOSUrItzvfyi/GPfdQsSZLg+3FWOwKf13Fp99n+/4IUDm+hdOeNaBnkvJSp
 pLt0+bVctCp4i4VGwGzFw5kPVLLl/HotM8hEnAAlGr7bPXP+oEQAN0EYZIUirqM5
 4HEYH2zkmK7ffy7FIARrvBKrE0krihtYFm931pCMzlQzzWGOfAOyoVwPCZq+Rg0R
 yXpk8QSObc2o8ywnihfDYstiMToU9c8Et3IjpQUJ1hzH2kMofcJJ9PclVjSv7GWw
 B9e6Fm14Za6Cp1Ec+X4VYJrWGI7dF8131Tsp0L7uVUk5ypqdV3rqv2hWnViZm72q
 BBaTldmA5NzmBmwRWzxmRkFrl/WxsQQ2DN0NLIOJ4dUWn1MtCwZxvFuec/X3g8/f
 dYwsKcFrG0oT+mYBBFZ7c7adpGTM2+hjuksolZPmRjGWRTPkjeISlbruG3UtWVuT
 OhyUJDFQLpdenOTJJ9ZfVY5tgsItwibbTlhgKC4WFw/zd32Qs8fjIuPXrqzPIQHQ
 jtbtAYYOp0r+cA==
 =bqwE
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.3-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

soc: tegra: Changes for v5.3-rc1

This contains a set of minor fixes and cleanups for core Tegra drivers.

* tag 'tegra-for-5.3-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: Select pinctrl for Tegra194
  soc/tegra: fuse: Do not log error message on deferred probe
  soc/tegra: pmc: Add comments clarifying wake events
  soc/tegra: pmc: Avoid crash for non-wake IRQs
  soc/tegra: pmc: Fail to allocate more than one wake IRQ

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 05:42:42 -07:00
Olof Johansson
09c4e038d4 memory: tegra: Changes for v5.3-rc1
A single fix for an unused constant variable, due to it being declared
 outside the only #ifdef that it was being used from.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl0M6uoTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoRgaD/sHXs67JZPx575ofWVpoMGopfnRjBR+
 vFUellzVj9KV616bUN1xlZiHBqeKv3XqLqhPFFjknj7xmIQAgyK0KjMjL1knUQ+f
 A6EU1AP3BKgIQDqcOk1dYk8AX2R28WtI+PIuad5xK+qp2e4DplCOOLFPlH/L+mzA
 wYWCwGow5MRtcPEzcMUxqXxXTxx4/gtvkDxdS0weu29QREz468jACTJp+lygZt4L
 /97A48dxOckcmEVhEp6sRmSOvPG7GSSR7QEwoTwDkj4U+MHs3Ie6rUrck4ZUPVGO
 xJ3/VY1i+uWAyPLIbKssaqhU5Wz8efTUJWMF7WflrSA28UfUNNnk/guX4PO9aZah
 EczCxDMpCNIhyscxqo1qNpwiHTaup+O24JNS91v4tGxLgoG9NHyJ/4nBlF2sa62+
 yqXCN7x7fH2eB4K9bvolasUNgCHYshNc0VIWymOh5Di1o1lCnGazqjo6y35jmYoC
 GpxXYvelEMDc7SqGhECuu3aFziajC/wDZjVdDHRXaJxxTjapugEW9rT1PlNf5NOA
 IQtEk8pF9V0W0PQyIjKc8X+6ycRBr4Lhx4HN+s2aQQziPmbdbJKZ3YiRnAVw7MHz
 phA7OU9QG7VEgdB7v7gaOAQd+0PgivHikaR0LVJRxkoSPG+6sJ2iNIxhOebKIcjI
 UirNJrV8bsOQCg==
 =wFKT
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.3-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

memory: tegra: Changes for v5.3-rc1

A single fix for an unused constant variable, due to it being declared
outside the only #ifdef that it was being used from.

* tag 'tegra-for-5.3-memory' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  memory: tegra: Fix -Wunused-const-variable

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 05:42:12 -07:00
Olof Johansson
9d9dd994b5 firmware: tegra: Changes for v5.3-rc1
This contains a single, simple change that resumes the BPMP driver early
 so that it is available when the various consumers want to enable their
 clocks.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl0M6qQTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zofelEAC3vOPpxp5WlH5Cu2hxu7LKm5/bWQBy
 hMs6NPjx5kP4IOhIMgoE31aDBKiQeUwF8D+SNjyfELqgZjYkc93eVSoB5DzzQC3R
 N7kcAiADqIekJlPcJvp5SUzG9gf3nNDLNIpFVkFn+olRY2wDdOzAwClO7ygX/GUU
 zdBfu26vhcfBvg9gH/oWV3vjrdRm0H8KULDRWfQFvzHoMRagTCle6+i9MFiCFt4D
 BoKar0Vcd02tt0Fh/uYVz58wg5ryHx1Z/j/rkYqgZ74MFL4wmnhhdbJB/+i5QPLf
 73NKwxNBvW06ro2e807NpoUn5PjOHUx0uyPWtUsnnk4xu4eVa1XQmsKaWElAmUhO
 xync25GGLrIxup9VnHWe19r6U1HgNLW1gX5PQ6su5OobAgaiA/Mkq7FRYoEOBGxN
 T1ljNzwZUpIqPCo4BVxWHz+F8Jqsl1hgvbqJjgfxsBxZrkTr9EEltZXBLS1kdbzb
 51QkK1QLHqKn8ugydJF3zpF1IPK9cvLD/MjFXCjDDkpmZ7v3F+8QZIAy9nat/k93
 kKU/B3iY8q5CPzT/GqpHOWSoLx6qTDe+Sla8egJJhJR8Fr1DItcmtJnmJFztM5aA
 O4Uv0RY63YKdqO/XUge5sEVCTVyGCN1y8SuE5Oj5/8b5Zcax+NV00GXRWVy0Tf2F
 fSZMk25b/ol4LQ==
 =fkWW
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.3-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

firmware: tegra: Changes for v5.3-rc1

This contains a single, simple change that resumes the BPMP driver early
so that it is available when the various consumers want to enable their
clocks.

* tag 'tegra-for-5.3-firmware' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  firmware: tegra: Early resume BPMP

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 05:41:44 -07:00
Olof Johansson
71a34b7cc7 soc: Amlogic driver updates for v5.3
- canvas: add support for Meson8*
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl0L8yEACgkQWTcYmtP7
 xmXffA//XLMUCP7G+WWtcmui5J8zn09ePyLUSiohP+1OR5IxmsBP/Ojq5Vt/m/eN
 PrjDsi1aV3sw5tJ/V+fpB2z+ZwNoSTycsgCllXpRkJHQEUTF/tRc5TGSyktJOP9s
 LsjQ2ZLMDUWPnAlB4t8FCejHXl5ozPgXVCwyRqsXM2bLvkH71U/w2F8LBb8mayX4
 4XN6NdekyHGKUXfL3+NDWr6Frvn5l0CWL9zqnlvAaTIMwKppS0aOzIdk/tjKCPx1
 h4WONctwybPJRv/sQWlZrV7i2838+MRxEqdtVAE509E+8VJUPUI9znewXHFdwGS2
 NnT2LKpsdpbmeX9haeKNwP0Im/PHDU0jpaBBGFqYHKWgkvyykHnk23x4U41jQ6vn
 6MFS7G+u37NXxBRZJqkWfgOjWqJMea8r/dx6eBps3MfQSNrcv0z6mVHZqk5YXPC7
 n8vm5BoTSEFh4Ja8GkH6QaEUTZn7nsawXSzq16yYS1uj63cakmoOO06xGBuVnZNJ
 qbPIGA0Mo/4eBM67mszepPJBGCt8Y3pUVKuV8CAzxw2fWutTCdc7BjKkbzicKmQN
 6WFZ3PPz+rQS/uJF1CLJ8AsNfCZfSnaQg8g8kBSK9y2/5EwNa+mmy5WO8Lyx2i8B
 0Gt4yC7zkRrKV5fHqONoNzFydrYZtQIz0dI3gOU0GtQuyb0t1LA=
 =NrZO
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers

soc: Amlogic driver updates for v5.3
- canvas: add support for Meson8*

* tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  soc: amlogic: canvas: add support for Meson8, Meson8b and Meson8m2
  dt-bindings: soc: amlogic: canvas: document support for Meson8/8b/8m2

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 05:40:57 -07:00
Olof Johansson
c616ea191d Qualcomm ARM Based Driver Updates for v5.3
* Add ACPI support to Qualcomm GENI SE
 * Update Qualcomm Maintainers entry to remove David Brown as maintainer and
   fixup typos and incorrect DT file entry
 * Fixup APR domain id usage and making callbacks in non-atomic context
 * Add AOSS QMP driver and bindings
 * Add power domains for MSM8998 and QCS404 in QCOM RPMPD
 * Add corner macros, max state support, and fixups for setting performance state
   for Qcom RPMPD
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdCeKEAAoJEFKiBbHx2RXVwvsP/3SBUTeyDP7HsD1+D9f8ojhC
 8TDQIpQw9jB+txczdnnoF5vewALpwc3E+intuUZd3oOPB6Nw/g6VU73HDGSDOBHc
 nbAf5UjpJgyo7XI+tJk9/m27Ee7y+MIzrk2qtDoboOv0/PZzfrAoFpm75mFJsylw
 luf3TMCTDd23aj6HxVe6dzz5F0gHVxF8hldlDkgiQZXGK0h/yInHEYgRe8vBdQGD
 wRkU8jKBU49n3OOY7qqD9PKKNSREC6nYxWIK/EJdjaMSNlwmzNJYUXANgtJj4/6G
 WmNBA84EplqDJIz6GJ6u5oTYQYISxNlvk0w0USmtXFTktv4wP1IsXb9swZGsYD2B
 lD825pM72tO3YqS14HHZ/GvxNsZvn5THPlUrp5Z5s5o+l4HL88FxHOfd6vk/H5mF
 dP/MO3xSIRD65FHZMOoSevAJkXtxZhAYNcaTBWWCPpJwgb6iPOY4q17R5ODATJgA
 5qJmebzWEn0AoseVEx6PTiejInf6yoDeC5iwcYEjIXqESZrLTvs0+kuZ/nbsD5v4
 1yUWGpw1fhVctYmesJk7CfQ2tFLbTtSH+1XTxHnqltriy1I01meTIA5azSaAumzx
 YGzVhmsAp0RxmNPjB41L8B5A3V1LfqXcQwauT5pCzGif9uQKxpjUoS6gSwvAa8Da
 QAuwPgQEH5ISDat755pO
 =JunO
 -----END PGP SIGNATURE-----

Merge tag 'qcom-drivers-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers

Qualcomm ARM Based Driver Updates for v5.3

* Add ACPI support to Qualcomm GENI SE
* Update Qualcomm Maintainers entry to remove David Brown as maintainer and
  fixup typos and incorrect DT file entry
* Fixup APR domain id usage and making callbacks in non-atomic context
* Add AOSS QMP driver and bindings
* Add power domains for MSM8998 and QCS404 in QCOM RPMPD
* Add corner macros, max state support, and fixups for setting performance state
  for Qcom RPMPD

* tag 'qcom-drivers-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  soc: qcom: geni: Add support for ACPI
  MAINTAINERS: Remove myself as qcom maintainer
  soc: qcom: apr: Don't use reg for domain id
  soc: qcom: fix QCOM_AOSS_QMP dependency and build errors
  soc: qcom: Add AOSS QMP driver
  dt-bindings: soc: qcom: Add AOSS QMP binding
  qcom: apr: Make apr callbacks in non-atomic context
  soc: qcom: rpmpd: Add MSM8998 power-domains
  dt-bindings: power: Add rpm power domain bindings for msm8998
  soc: qcom: rpmpd: Add QCS404 power-domains
  dt-bindings: power: Add rpm power domain bindings for qcs404
  soc: qcom: rpmpd: Modify corner defining macros
  soc: qcom: rpmpd: Add support to set rpmpd state to max
  soc: qcom: rpmpd: fixup rpmpd set performance state
  MAINTAINER: Fix Qualcomm ETHQOS ethernet DT file
  MAINTAINERS: fix typo in file name

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 05:39:44 -07:00
Brian Masney
648fdc3f64 drm/msm: add dirty framebuffer helper
Use drm_atomic_helper_dirtyfb() as the dirty callback in the
msm_framebuffer_funcs struct. Call drm_plane_enable_fb_damage_clips()
when the planes are initialized in mdp4, mdp5, and dpu1.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Rob Clark <robdclark@chromium.org>
2019-06-25 05:29:59 -07:00
Christoph Hellwig
b1acd4b8a8 nios2: use the generic uncached segment support in dma-direct
Stop providing our own arch alloc/free hooks and just expose the segment
offset and use the generic dma-direct allocator.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ley Foon Tan <ley.foon.tan@intel.com>
2019-06-25 14:28:06 +02:00
Christoph Hellwig
6309513c1b nds32: use the generic remapping allocator for coherent DMA allocations
Replace the code that sets up uncached PTEs with the generic vmap based
remapping code.  It also provides an atomic pool for allocations from
non-blocking context, which we not properly supported by the existing
nds32 code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Greentime Hu <greentime@andestech.com>
Reviewed-by: Greentime Hu <greentime@andestech.com>
2019-06-25 14:28:06 +02:00
Christoph Hellwig
f73c904534 arc: use the generic remapping allocator for coherent DMA allocations
Replace the code that sets up uncached PTEs with the generic vmap based
remapping code.  It also provides an atomic pool for allocations from
non-blocking context, which we not properly supported by the existing
arc code.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Evgeniy Paltsev <paltsev@synopsys.com>
Tested-by: Evgeniy Paltsev <paltsev@synopsys.com>
2019-06-25 14:28:05 +02:00
Christoph Hellwig
d98849aff8 dma-direct: handle DMA_ATTR_NO_KERNEL_MAPPING in common code
DMA_ATTR_NO_KERNEL_MAPPING is generally implemented by allocating
normal cacheable pages or CMA memory, and then returning the page
pointer as the opaque handle.  Lift that code from the xtensa and
generic dma remapping implementations into the generic dma-direct
code so that we don't even call arch_dma_alloc for these allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2019-06-25 14:28:05 +02:00
Christoph Hellwig
c2f2124e0d dma-direct: handle DMA_ATTR_NON_CONSISTENT in common code
Only call into arch_dma_alloc if we require an uncached mapping,
and remove the parisc code manually doing normal cached
DMA_ATTR_NON_CONSISTENT allocations.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Helge Deller <deller@gmx.de> # parisc
2019-06-25 14:27:58 +02:00
Toshiaki Makita
9cda7807ee veth: Support bulk XDP_TX
XDP_TX is similar to XDP_REDIRECT as it essentially redirects packets to
the device itself. XDP_REDIRECT has bulk transmit mechanism to avoid the
heavy cost of indirect call but it also reduces lock acquisition on the
destination device that needs locks like veth and tun.

XDP_TX does not use indirect calls but drivers which require locks can
benefit from the bulk transmit for XDP_TX as well.

This patch introduces bulk transmit mechanism in veth using bulk queue
on stack, and improves XDP_TX performance by about 9%.

Here are single-core/single-flow XDP_TX test results. CPU consumptions
are taken from "perf report --no-child".

- Before:

  7.26 Mpps

  _raw_spin_lock  7.83%
  veth_xdp_xmit  12.23%

- After:

  7.94 Mpps

  _raw_spin_lock  1.08%
  veth_xdp_xmit   6.10%

v2:
- Use stack for bulk queue instead of a global variable.

Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-25 14:26:54 +02:00
Toshiaki Makita
e7d4798960 xdp: Add tracepoint for bulk XDP_TX
This is introduced for admins to check what is happening on XDP_TX when
bulk XDP_TX is in use, which will be first introduced in veth in next
commit.

v3:
- Add act field to be in line with other XDP tracepoints.

Signed-off-by: Toshiaki Makita <toshiaki.makita1@gmail.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-25 14:26:50 +02:00
Bjorn Andersson
9e6ea59f3f iommu/io-pgtable: Support non-coherent page tables
Describe the memory related to page table walks as non-cacheable for
iommu instances that are not DMA coherent.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
[will: Use cfg->coherent_walk, fix arm-v7s, ensure outer-shareable for NC]
Signed-off-by: Will Deacon <will@kernel.org>
2019-06-25 13:26:47 +01:00
Chris Packham
eed43e7e17 pinctrl: mvebu: Add support for MV98DX1135
The 98DX1135 is a switch chip with an integrated CPU. This is similar to
the 98DX4122 except the MPP assignments differ.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-25 14:25:31 +02:00
Chris Packham
7b34b0032b dt-bindings: pinctrl: mvebu: Document bindings for 98DX1135
The 98DX1135 is similar to the 98DX4122 except the MPP options differ.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-25 14:24:36 +02:00
Olof Johansson
29217a9eb0 ASPEED device tree updates for 5.3
Add new drivers to the ASPEED G4 and G5 defconfigs, and to the armv5
 multi defconfig.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAl0N3GoACgkQa3ZZB4FH
 cJ73shAAio6Yys7AWLNJwtlr5c4irMg8s98XUEEjXn23FWfFWqgQs/2c6btERL/k
 S/X9v5i8UYG4hOJAuEX+B+UAOnBvQf8BqMCT7nflIs1dKuJBjRRt71cvIFVV6AD1
 R1McitFK0EKZEi2Z42jwi2RInl7WWwRZ7xgZx5mPvkpn8YI7JIUUXRTg+bNGnJQ8
 31T3oDzOvmJgAxgMhlBjbaT4McK6o1Hkd2+TrCbpEBvGGshfxtXI1VzRvI2hPDGl
 rzdVEjn5KGhu+KKxCmfl4xsO/IUM2NBUwrCYm+8SCEDIrEbmg9szJ12OZRYkyqfF
 3MTT7L69TqF4KVsZ38Mco4MsX+z4+jrAiDjFyiXGZaa4WJ8c9J9Hp1qDKB95tKDJ
 nShv/Xp2JfBcVuwcPyC4llIIfTu/ZJkLNP6dR7dlaoetAyFuFSXBeBCUVwIhQ32B
 hBLjwPhrdARjuZOu970mOzBg5HR6WDQfYAWhZD3XzlpQPos9sCGVenjCam29izwj
 95/MKNjJH4WsdVc4ZG7VGuvIqA4iocFdl9CNVDkBaBOtsb4GeWAycJbAoktlnABl
 6Z/LiHDnDz7UjvfF3Qf3IS2cKgA+66N8lPjWtNB4ktUBQUuI1jU+YgBoqUUTnJ8p
 auBbVW/rTl2ZxKY42pmzfS3Ugw44ozTs6XtT4FV0kIgEgYrRcsw=
 =YrwI
 -----END PGP SIGNATURE-----

Merge tag 'aspeed-5.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/defconfig

ASPEED device tree updates for 5.3

Add new drivers to the ASPEED G4 and G5 defconfigs, and to the armv5
multi defconfig.

* tag 'aspeed-5.3-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: configs: multi_v5: Add more ASPEED devices
  ARM: configs: aspeed: Add new drivers

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 05:21:01 -07:00
Olof Johansson
1242de90ba arm64: tegra: Default configuration changes for v5.3-rc1
This enables the INA3221 power monitoring driver that is used on many of
 the Jetson boards as well as Tegra194 PCIe support.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl0M7M0THHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zobJxEACOecUby6P9BIr25Kl7vvroKJUN/BSs
 ZOj39txFnZfgsLc5AzKlwNmW7b1lTImZI68mB0B0kny+UGByCSSkGkRHWWSHU2/3
 ijrz8wtqPKtu/WoTj5oHBvunFeYzCqQuSW17WptWtuZamMLLCWIM8+OZU3GFKRBl
 VwFxD369v4zf3hs6zKJ1eyNqNQg94hUxmD5KaxFL+JWZYqjVsrjbYa7mLUmGY+r7
 AZrIn7t/7r2xvjWm2EmNU9W73P0jsrFyu3hsvR1xFVIxXw8bneKsDei89iEwVDBo
 jzSdKRubGaiJvcDx5BeEtWLsgR+sFoZfbrgHyUPlEY36SERnBXdSeDQen/Spttyr
 5wyPcS8dRPqW5zB7WZ8M7JR4eEDEAxgUTBE8j7Tlruhkvf7MeP/R9+8TIhuobFWZ
 LVDijGIaMiITuFtqtXivz7e+/0dkEyXJcmrdyXYZ0qJzQIaITPonUwPV2Q7VOK0h
 GBP+vpBAB8M+Qg+47va+nSz15DDqHv3x/GoHQ7+rEzZVzuJopsg1JbwozcPYWVN9
 PKGqoQbi288Qoo3hIqqHiab0PCY5S09AiN3eIYih2VYBV/bIpxHvAnFchFM6o5WP
 gVcKov06ojhMTLhYW++f4BfM30ySFnhZMv3AhZnR5OvOkpfmxRqd93AMiUIRxJdE
 QskmOXsBQ6r8Nw==
 =NJQ7
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.3-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/defconfig

arm64: tegra: Default configuration changes for v5.3-rc1

This enables the INA3221 power monitoring driver that is used on many of
the Jetson boards as well as Tegra194 PCIe support.

* tag 'tegra-for-5.3-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: defconfig: Add Tegra194 PCIe driver
  arm64: defconfig: Add HWMON INA3221 support

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 05:19:55 -07:00
Amelie Delaunay
478b973b21 ARM: multi_v7_defconfig: enable STMFX pinctrl support
This patch enables support for STMFX pinctrl.

Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 05:18:01 -07:00
Olof Johansson
111914d79b Renesas ARM64 Based SoC Defconfig Updates for v5.3
Enable as modules:
 * TYPEC_HD3SS3220 B Type-C DRP Port controller driver
 * TDA19988 HDMI encoder driver
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAl0MlLoACgkQ189kaWo3
 T77TPA/9Gvfy7hnKOIO0WEPo3ifQcg1pg/iS7Hb7G8Vdj2mjV4/9/OHDdpGOXXMx
 bk0sE6pFMiG2IjI/TgbhF/YI+V/PASLqOFYfK0PoB5l/f3s0c7Z+Gls8WH73UvlQ
 uC1Q5aZMbqWUK5/SWR4ORWxBwAlc2DbWA+tq3+y76efcNHRwWbFrf9tTfOCoNhPV
 7fTEC8WSq3yYP9weZWveq3COprq4890Dtp/luj2FUXbtxJRGcGjL+3ojLoXRH6oG
 ldCkaG0zrYJQbXsXBJTjE2ZT+dBu1gKeR4sVWwTKT8WGBoP27Z4C/+uuhhpXXoY2
 F+CEnWA0WJOYQIz1v+JhMGtLTLp0r5tvgdypeXBeiB9ht/8/JusiV2qFeMXQnY+s
 LJ5wAhdBYzdH/g5apsW/+G1kTQzmx86CVIWtYkmzJ/yWB8q/t7Lr6azxE6338ZDQ
 5RoEGc9gUmNSYk2XK5Aly650uZUDDnldqfG7wuPnelqedZGcbWA9eHxbRwJS+i7u
 4XPBbqOkeUoerNIfIuFF+M4rgGW4PKBsDikgAz5M43Ygu0RVqVrgrRqHGVaqiOfR
 SfFZRzjTNKXJw3Ad/b+F11xawDLJ9LapQRV3w0igmgMGLzAyIB0v7B/OcVLYecf2
 MNYITg8ACa1gWushEZIyepjAL3MD7Fj9b19l7UAW9oWSm8MlwEI=
 =ZT50
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm64-defconfig-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfig

Renesas ARM64 Based SoC Defconfig Updates for v5.3

Enable as modules:
* TYPEC_HD3SS3220 B Type-C DRP Port controller driver
* TDA19988 HDMI encoder driver

* tag 'renesas-arm64-defconfig-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: defconfig: enable TYPEC_HD3SS3220 config option
  arm64: defconfig: Enable TDA19988

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 05:17:38 -07:00
Olof Johansson
5cf0fb260a Renesas ARM Based SoC Defconfig Updates for v5.3
* Remove GENERIC_PHY from shmobile_defconfig as it is now selected
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAl0Mg+oACgkQ189kaWo3
 T77Kdw//b5vxuekiU5oVfmdr59hQYDTJkYxsL6YDpcvk09dW/b+7xLT2aZ1JSY9T
 SGIgymKOtSM05McCKLUG5+nUIVlNkQHB+v16WU8Zmw/Ol3iJV5eHijZwCqI+bpsr
 hGmjXeLrGO2vmdsn9nBa9hzujgNiwDAKnGd7zEPOgSyo3/bqb5oi6AyucDxsMxYI
 PBi+DKKHtnB1iymyem5Oi8tLYJ4dB7UAxQLGnl37pHnj8hgP7iDswmJL5Z1E+UJq
 +3ZXTuUhK/pUIl00leVaNURyOF7KiTULbrqIf7q4oTx2HA1apWvHEVSGEvIAlQ/3
 irOBaABjOsCNhHvPLiVtv06+ovxdkZ+P3/oCFhOqutnBnQUXZ2Brr0MuzeNKahbY
 edQ18Cd9aiIluAhq0Ixy2iXDXSBX0FL9ROZFklIZdoGhuf5obvq27CufA07aYk9P
 8qzwFAvybXck/kHmAS4q+J8w+6bslt1Gi8f/C54iYJu2dCNQYeeG8au1iaj+I09f
 z3ewbXBZOwqWlM+I0eXjB/QJC6GE0iGv4zuM1GwVNuJiFH1HD3ddg1Ne7sr8Mjod
 1fRkT+UD6JqnQadKrLLOovbHCXAIBSWtOzlhsZpuN/vhmOyRpsK5QRVpbuv284AF
 DukXXlZJozI23WPGdEY8KlkjODFi0QPNEsCGnbmFVxM4N7Z+QJI=
 =UHQN
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm-defconfig-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/defconfig

Renesas ARM Based SoC Defconfig Updates for v5.3

* Remove GENERIC_PHY from shmobile_defconfig as it is now selected

* tag 'renesas-arm-defconfig-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: Remove GENERIC_PHY from shmobile_defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 05:16:22 -07:00
Phil Reid
6dbc6e6f58 pinctrl: mcp23s08: Fix add_data and irqchip_add_nested call order
Currently probing of the mcp23s08 results in an error message
"detected irqchip that is shared with multiple gpiochips:
please fix the driver"

This is due to the following:

Call to mcp23s08_irqchip_setup() with call hierarchy:
mcp23s08_irqchip_setup()
  gpiochip_irqchip_add_nested()
    gpiochip_irqchip_add_key()
      gpiochip_set_irq_hooks()

Call to devm_gpiochip_add_data() with call hierarchy:
devm_gpiochip_add_data()
  gpiochip_add_data_with_key()
    gpiochip_add_irqchip()
      gpiochip_set_irq_hooks()

The gpiochip_add_irqchip() returns immediately if there isn't a irqchip
but we added a irqchip due to the previous mcp23s08_irqchip_setup()
call. So it calls gpiochip_set_irq_hooks() a second time.

Fix this by moving the call to devm_gpiochip_add_data before
the call to mcp23s08_irqchip_setup

Fixes: 02e389e63e ("pinctrl: mcp23s08: fix irq setup order")
Suggested-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Phil Reid <preid@electromag.com.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-06-25 14:14:26 +02:00
Olof Johansson
9dd1901b8c Qualcomm ARM Based defconfig Updates for v5.3
* Add support for USB networking
 * Add support for display related options
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdCeOfAAoJEFKiBbHx2RXVp7sQAOAlKXV7+IpZlP58FhfINeSk
 4nT5P8HN5NkyHe6bgJ/gPL+YwO5dRb5nZwuTPFZlGCKbuWYQaEXtxZKZr8qrZzYw
 StQT7Q4MwXM+RY/3BeE2VI8S8KOGnqrjLnKDSMlA6mRA4F6c1crw2xPx/cElix5z
 U7RXo/t4jLsT4HBnslSXslT/vGJim63ea3VS0eEvuIBHcghn8APX5bROCYrQJ2wz
 VCy8A8NvqrAPfsMZMkDmYvddESqNhm+1uEfA6bMRARhXDArVa4NwaaafuuinLmWs
 BZ2T11kXJa1wTU0UFw5NKYt5XVMfJKOb0ol0OyinU0/x0wME5+53W/I8H3KntINu
 yEI/VCQnL6R2wul8CGLCgxbWUDHyOk0kMlvsLcVv3/1tpmniAz9modYbk41qNlOd
 R2ISbxVD/ZQan9uBWDeoknXiMrR9EHg2BmiTZ2+YBRRrfriSy+FMUi/cdZt8NQwL
 7XloS85l7Q2d/k4d5aYtdYyjsgSuzKPYuYspceI5uvSaiTQR4mtwnMUzpA8GHODH
 WhAdlErXJjOiy8oSw27mE30FiRfdw3w0KrP1bCSecit/8+FzIRhAdHI9/XatASPC
 hHjtkgkTD6xgFe95iIaworPm53oCGVFiOp0VaAExXBixGoohNwxsJLWWsRG3+8rc
 5vWTulykrD9Rdf2BU3VR
 =Hq9W
 -----END PGP SIGNATURE-----

Merge tag 'qcom-defconfig-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/defconfig

Qualcomm ARM Based defconfig Updates for v5.3

* Add support for USB networking
* Add support for display related options

* tag 'qcom-defconfig-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: qcom_defconfig: add support for USB networking
  ARM: qcom_defconfig: add display-related options

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 05:13:46 -07:00
Björn Töpel
0eb84fa6e6 MAINTAINERS: add reviewer to maintainers entry
Jonathan Lemon has volunteered as an official AF_XDP reviewer. Thank
you, Jonathan!

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-06-25 13:58:50 +02:00
Richard Sailer
503d90b306 ALSA: hda/realtek: Add quirks for several Clevo notebook barebones
This adds 4 SND_PCI_QUIRK(...) lines for several barebone models of the ODM
Clevo. The model names are written in regex syntax to describe/match all clevo
models that are similar enough and use the same PCI SSID that this fixup works
for them.

Additionally the lines regarding SSID 0x96e1 and 0x97e1 didn't fix audio for the
all our Clevo notebooks using these SSIDs (models Clevo P960* and P970*) since
ALC1220_FIXP_CLEVO_PB51ED_PINS swapped pins that are not necesarry to be
swapped. This patch initiates ALC1220_FIXUP_CLEVO_P950 instead for these model
and fixes the audio.

Fixes: 80690a276f ("ALSA: hda/realtek - Add quirk for Tuxedo XC 1509")
Signed-off-by: Richard Sailer <rs@tuxedocomputers.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-06-25 13:56:02 +02:00
Olof Johansson
37937ee73b i.MX arm64 device tree changes for 5.3:
- Add i.MX8MQ based Librem5 devkit support.
  - Add SNVS power key support for i.MX8MQ and i.MX8MM.
  - Add GPIO alias for imx8mq and i.MX8QXP.
  - A series from Daniel Baluta to add SAI devices and enable audio
    support for imx8mm-evk board.
  - Add DDR performance monitor unit support for i.MX8QXP.
  - Add irqsteer interrupt controller device for i.MX8MQ SoC.
  - Add CPU speed grading and all OPPs for i.MX8MM and i.MX8MQ.
  - Add OCOTP device node for i.MX8QXP.
  - Various device addition for LS1028A: SATA, qDMA, USB, Mali DP500 and
    temperature sensor.
  - Random minor coding style improvements.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdEcFcAAoJEFBXWFqHsHzOcNYIAICVsBiJX/gU0t+jT7i1KL83
 jDe/DDNg8j9PgR0ElLPejskJgnNYLS0DTWYCY/yPgzK8bwLuqxseVyjXBhyptZ1o
 Oecgp9c/79RGsJi9+tFlPKCB/jL4gvagbNn0kPAAoCv3dV5n5FikuSXfsN1v0DJi
 JpBXO0IHpkqRTJKk7Ran5MzxxaHbWkjMn0u80ewsAioZv/XhPg5xVSsONleQdh2V
 YtZkjcAuA7M9ZOLTKcEFmGyZW/ZTLcW7+xaj9ETJGtMJEi60igPyeFcmd1YIKfIh
 g1RwqgDilwEbh2rNulyZbRkRJKQDjTeHUNRqyGEM54lxAB52VQo5hHYa56K2m9Q=
 =SIR/
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt64-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree changes for 5.3:
 - Add i.MX8MQ based Librem5 devkit support.
 - Add SNVS power key support for i.MX8MQ and i.MX8MM.
 - Add GPIO alias for imx8mq and i.MX8QXP.
 - A series from Daniel Baluta to add SAI devices and enable audio
   support for imx8mm-evk board.
 - Add DDR performance monitor unit support for i.MX8QXP.
 - Add irqsteer interrupt controller device for i.MX8MQ SoC.
 - Add CPU speed grading and all OPPs for i.MX8MM and i.MX8MQ.
 - Add OCOTP device node for i.MX8QXP.
 - Various device addition for LS1028A: SATA, qDMA, USB, Mali DP500 and
   temperature sensor.
 - Random minor coding style improvements.

* tag 'imx-dt64-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
  arm64: dts: librem5: enable the SNVS power key
  arm64: dts: librem5: Limit the USB to 5V
  arm64: dts: imx8qxp: added ddr performance monitor nodes
  arm64: dts: imx8qxp: sort LSIO subsystem devices
  arm64: dts: imx8qxp: sort alias alphabetically
  arm64: dts: imx8qxp: Add lsio_mu13 node
  arm64: dts: imx8mm-evk: Enable audio codec wm8524
  arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
  arm64: dts: fsl: ls1028a: Add qDMA node
  arm64: dts: imx8mm: Enable SNVS power key according to board design
  arm64: dts: imx8mq-evk: Enable SNVS power key
  arm64: dts: ls1028a: add crypto node
  arm64: dts: ls1028a: Add temperature sensor node
  arm64: dts: imx8mm: Move gic node into soc node
  arm64: dts: imx8mm: Move usbphy out of soc node
  arm64: dts: imx8mm: Pass the 'ranges' property
  arm64: dts: imx8mm: Pass a unit name for the 'soc' node
  arm64: dts: fsl: imx8mq: add the snvs power key node
  arm64: dts: ls1028a: fix watchdog device node
  arm64: dts: ls1028a: Enable sata.
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:52:55 -07:00
Olof Johansson
09253fccca i.MX arm32 DT changes for 5.3:
- New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based
    Meerkat96 board, and NXP LS1021A-TSN board.
  - A series from Andrey Smirnov to update vf610-zii-dev and
    imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path,
    adding QSPI device, and dropping unused pinmux.
  - Update imx6sl and imx6qdl device tree to assign corresponding clocks
    instead of dummy clock.
  - Update i.MX6/7 boards from NXP to assign corresponding power supply
    for LDOs.
  - Update i.MX6/7 device trees to enable SNVS poweroff key support
    according to board design.
  - Update coresight DT binding for i.MX7 according to consolidations
    for CoreSight replicator and funnel.
  - A series from Marek Vasut to update M53Menlo board on various devices
    like UART, USB, ethernet PHY, GPIOs etc.
  - Enable USBOTG support for imx7ulp and evk board.
  - A series from Peter Robinson to update imx6sx-udoo board, switching
    to SPDX License Identifier, enabling I2C devices and bluetooth
    support.
  - Add video capture support for i.MX53 and imx53-smd board.
  - Add PXP device for i.MX6UL.
  - Other random small updates on various boards.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdEbs9AAoJEFBXWFqHsHzOkIoIAKBS9jB7Lp6DSGpYIgwdjBmK
 PY0ogud8FZEfHFdDi9WGt3d1KFkr0xBJPvJ1Tn48BdpN/k3TMrFs1sj/PRNlIRe5
 llnBpCD5oV7SHAdIkFcGIQeWwHMfnpxe1NdhMiCpT6pKtk2oieRWVs0RvdZ5UgRI
 aULSFbxs/ZEjvVa3Jcx7KjFmceCHP8naICtYm7ZYjn3vDI7y1ZosaD9pWFSL3N/k
 l/F3B05Zh6HA4HpldGxCbxSVr94GE9HgLXGigo/nEGjiHmhecc2rievsegJP9AKa
 z1bTtIK+qrsYmUtXWGPgNTXLpVfjRf+0Q6z60uVDhsfuNJx2IVJkyBeAebXCSMk=
 =pBgY
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm32 DT changes for 5.3:
 - New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based
   Meerkat96 board, and NXP LS1021A-TSN board.
 - A series from Andrey Smirnov to update vf610-zii-dev and
   imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path,
   adding QSPI device, and dropping unused pinmux.
 - Update imx6sl and imx6qdl device tree to assign corresponding clocks
   instead of dummy clock.
 - Update i.MX6/7 boards from NXP to assign corresponding power supply
   for LDOs.
 - Update i.MX6/7 device trees to enable SNVS poweroff key support
   according to board design.
 - Update coresight DT binding for i.MX7 according to consolidations
   for CoreSight replicator and funnel.
 - A series from Marek Vasut to update M53Menlo board on various devices
   like UART, USB, ethernet PHY, GPIOs etc.
 - Enable USBOTG support for imx7ulp and evk board.
 - A series from Peter Robinson to update imx6sx-udoo board, switching
   to SPDX License Identifier, enabling I2C devices and bluetooth
   support.
 - Add video capture support for i.MX53 and imx53-smd board.
 - Add PXP device for i.MX6UL.
 - Other random small updates on various boards.

* tag 'imx-dt-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (46 commits)
  ARM: dts: imx7ulp-evk: enable USBOTG1 support
  ARM: dts: imx7ulp: add imx7ulp USBOTG1 support
  ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support
  ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module
  ARM: dts: imx7d-zii-rpu2: Drop unused pinmux entries
  ARM: dts: imx7d-zii-rpu2: Fix incorrrect 'stdout-path'
  ARM: dts: Add support for 96Boards Meerkat96 board
  ARM: dts: imx6ul: Add PXP node
  ARM: dts: imx6sll: Enable SNVS poweroff according to board design
  ARM: dts: imx7s: Enable SNVS power key according to board design
  ARM: dts: imx6sll: Enable SNVS power key according to board design
  ARM: dts: imx6ul: Enable SNVS power key according to board design
  ARM: dts: imx6sx: Enable SNVS power key according to board design
  ARM: dts: imx6qdl: Enable SNVS power key according to board design
  ARM: dts: imx53: Bind CPLD on M53Menlo
  ARM: dts: Introduce the NXP LS1021A-TSN board
  ARM: dts: imx6ull-colibri: enable UHS-I for USDHC1
  ARM: dts: imx7d: Update cpufreq OPP table
  ARM: dts: imx6sx-udoo-neo: add bluetooth config to uart3
  ARM: dts: imx6sx-udoo-neo: enable i2c-2 and i2c-4 for onboard sensors
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:52:17 -07:00
Olof Johansson
9bb03d2644 i.MX DT changes with new clock for 5.3:
- This is a set of device tree changes with new clocks - adding
    clock info for i.MX8 GPIO and SNVS RTC device.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdEY9IAAoJEFBXWFqHsHzONzkH/iQWmmauxY3ONsDhCOiq2xkz
 agKfN77pgM0005NJl8bP/+wyl6JXozpq31PJrbWPvdZCwElEzBykmWZzyG2cl6Bx
 ajwsldhBzMoYKvjVH0MD3ldPXoANsvfIQiAyVzPHY/tCBHI6hnaJKWCaQ0fsqg5M
 vZ0lf5Adqh9MN7lBKWBz1tbOgqCNAVdhRrvLdrTuoQ/asjivqzl3oXXMWzzrc4lK
 pUGPg1+iqf/MSBVoX8F3ETO9W+GjdjHE0qoGttXf90w2epQZqO5Ta2mfhzyF4fkE
 pcPGKQTASi+zOcUuzgM97TGfWbeOYhd0kRmInZVZt+Wce2Ju4MO5M0Iyxp6xvJI=
 =GaZH
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-clkdep-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT changes with new clock for 5.3:
 - This is a set of device tree changes with new clocks - adding
   clock info for i.MX8 GPIO and SNVS RTC device.

* tag 'imx-dt-clkdep-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mq: add clock for SNVS RTC node
  arm64: dts: imx8mm: add clock for SNVS RTC node
  arm64: dts: imx8mm: add clock for GPIO node
  clk: imx8m: Add GIC clock
  dt-bindings: clock: imx8m: Add GIC clock
  clk: imx8mm: add SNVS clock to clock tree
  dt-bindings: clock: imx8mm: Add SNVS clock
  clk: imx8mq: add SNVS clock to clock tree
  dt-bindings: clock: imx8mq: Add SNVS clock
  clk: imx8mm: add GPIO clocks to clock tree
  dt-bindings: clock: imx8mm: Add GPIO clocks

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:51:42 -07:00
Will Deacon
4f41845b34 iommu/io-pgtable: Replace IO_PGTABLE_QUIRK_NO_DMA with specific flag
IO_PGTABLE_QUIRK_NO_DMA is a bit of a misnomer, since it's really just
an indication of whether or not the page-table walker for the IOMMU is
coherent with the CPU caches. Since cache coherency is more than just a
quirk, replace the flag with its own field in the io_pgtable_cfg
structure.

Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
2019-06-25 12:51:25 +01:00
Olof Johansson
c529cbb542 i.MX DT bindings for 5.3:
- Add vendor prefix for Purism SPC.
  - Add bindings for i.MX8MQ EVK Board, Purism Librem5 devkit and i.MX7
    Meerkat96 Board.
  - Add LS1028A specific compatible into qDMA bindings doc.
  - Move Emtrion i.MX6 board bindings to schema.
  - Add missing schemas for i.MX7ULP and i.MX1/31/35 bindings.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdEYVuAAoJEFBXWFqHsHzOXqwIAK+w+C2WOLYRECyQgYgLSf1T
 zZcx52hToPTgjQyAUeP+xXRMyBXTL2ODZNPxHsvf8DZzVtsUH91srtKgrK5EAPz9
 HrhZYhkZ8vTObFgFWI1yHB4za8iHqQmEPtyKsXvEfpM6gkfcHdnl6qvxapSwGn/F
 d4JS6mMQf+KTpb8Igbx/kw1SYz4aT+4153FqYn0JLWDzdbcmCyG5ih/tbsFbvtoQ
 CmB4Bevd38fXv8rrbhakYzSbnnZn2NUTQChkl166ZzGP73SGsAqjWe/lHvC8+2cW
 WqolQ9JxcYvHAwiK1NFYJOobQ4awb+D+7ijK8cnHhcpGkz9Q4OsdnX5ce9OJGys=
 =BqrQ
 -----END PGP SIGNATURE-----

Merge tag 'imx-bindings-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT bindings for 5.3:
 - Add vendor prefix for Purism SPC.
 - Add bindings for i.MX8MQ EVK Board, Purism Librem5 devkit and i.MX7
   Meerkat96 Board.
 - Add LS1028A specific compatible into qDMA bindings doc.
 - Move Emtrion i.MX6 board bindings to schema.
 - Add missing schemas for i.MX7ULP and i.MX1/31/35 bindings.

* tag 'imx-bindings-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: fsl: Add missing schemas for i.MX1/31/35
  dt-bindings: arm: fsl: Add back missing i.MX7ULP binding
  dt-bindings: arm: Move Emtrion i.MX6 board bindings to schema
  dt-bindings: arm: fsl: Add the imx8mq boards
  dt-bindings: Add an entry for Purism SPC
  dt-bindings: fsl-qdma: Add LS1028A qDMA bindings
  dt-bindings: arm: Document 96Boards Meerkat96 devicetree binding

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:51:18 -07:00
Olof Johansson
276610709d This is the pxa devicetree changes for 5.3 cycle :
- devicetree pinmux support for bias on pxa3xx
  - devicetree pinmux bias usage for raumfeld
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCgA1FiEExgkueSa0u8n4Ls+HA/Z63R24yxIFAl0QmYwXHHJvYmVydC5q
 YXJ6bWlrQGZyZWUuZnIACgkQA/Z63R24yxIe+w/+I0IPxGYZk+N+3n8Fc5d5kYBD
 0ppzLj2lN5FI3vRBeIZQFLhncqF4COQFtPu2v0/+eCF0P7b8s3Be6mfH1pBJr7tT
 lwDUZBBiGAYOTo+oH87opvtQFFi/sD4PhPQfYcNrFkHlob7UeuTAc9wHFWr512dW
 8Snf2bJRIsWAv7U79qdx90pLH4HGsWUnOU309nAOneWEZQ9Q2EyHsZatgu6AyFTN
 fMedFb7KTUK8hcoru576Bh68cddFxUHFGhsQLmdET5Z97yu+ZrRfvYYJ/Kqm7ZhC
 wbQo0JZVXitdUmKD78MiOBmRCJQPWBdoRm65LIPqnumO0H35mTln72SXQ/VdpwQO
 Sw4ujshfGuZDjNgVZkNT/oomCYgT3Ryq5gkK4iZXRjUnm4oNMmUmTulq74W8dlDj
 /4iFhndvA2fNLAA5FMLuuG+dXOxLvNV0zejZUfK9Omu76eYOkvgFlzwkG9rgbYST
 7Eax4aJpqV6XD7BxmUnldgKn4xcO9i7XgjkOy33JX3HDr2RFQyVuTkWPMbQaXdiL
 cEEt8ZFg1iNPzgoo810VLlJD1RNXfs2XlQkFrHh7L8l4kuUdTu9dA912BFekbjui
 AEDW4ERVqHbp7izOeRPo0nRuBU9mCeqJk13meDC8ppjk+AsHtTT/2BvnCih5SLJh
 2iBpzkFz4ZvJUoP7R40=
 =IzUY
 -----END PGP SIGNATURE-----

Merge tag 'pxa-dt-5.3' of https://github.com/rjarzmik/linux into arm/dt

This is the pxa devicetree changes for 5.3 cycle :
 - devicetree pinmux support for bias on pxa3xx
 - devicetree pinmux bias usage for raumfeld

* tag 'pxa-dt-5.3' of https://github.com/rjarzmik/linux:
  ARM: dts: pxa300-raumfeld-speaker-one: add channel output mapping for STA320
  ARM: pxa: raumfeld-common: fix comments in gpio_keys pinctrl node
  ARM: pxa: raumfeld-controller: add pinctrl for charger pins
  ARM: pxa: raumfeld-controller: fix 'dock detect' GPIO key
  ARM: pxa3xx: dts: Add defines for pinctrl-single,bias-pull{up,down}

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:50:23 -07:00
Olof Johansson
28705661dd AT91 DT for 5.3
- switch to new sckc bindings
  - convert soc bindings to json-schema
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEycoQi/giopmpPgB12wIijOdRNOUFAl0NPGIACgkQ2wIijOdR
 NOVOVw/+PFUFDqq2olVAqH2J0OBBZ6kiC/+dboTUUZtkOMjHww6YlUa4NsB+dd9l
 fpKvP8QeY9Y108OcMa1UKSZhRPr1xtay54L/zXyZ4LtVwj/BKg65v72XU+gV5i6t
 16+FBwgRTo/0m4Pl9+o8wg1YSEVIitUCz4P48muCSZtyh0e7V5iyhzjx8n1bG++y
 VtjS9w5BhRGCVCVNhJA5TLGjzXJADlCstvU48O4MvUQ/CPRPfI7spFZJ0FD6ry+f
 kK4kJcj8XFaiZQH9yW7cZbJIepkMdB5vPEXv5RDceDzMYIxcD41to0XAeHU4OhEv
 MaollJyzt7BXYukPmZCUqIL9hQI22dl4gk7APO7NSlbkjmqlEHfvM+AJ9UN5/s8Z
 Cdw+Q2G1vH5WCK0KacRDhn+lgFtD9gB5nHumEajZygPRIx9SdryRHr7xdqixlrtX
 HbRSTg/ZZA4VRvZcn0z4mhjdVzzNaFxhjXDWvu92Mh7cKmCOZhzHgiUJsK2kaKt6
 0FHnQgY5NjXORgH3PKDwhiTOsrF7gPnAusk1jQNGyRd7BzwxP6qpqq2/DZCu1oU1
 G4Ie7XeN6ePuZhs2IdApxaxbR/34MKvISem0OxGE8nDq2WPzQ1Ht2N9gr5jed1Oc
 qf+52z9lvW9RB+V8pG+ry3wu1zzinRY3NxF8WS3TCp2V6F7xQG8=
 =aj7b
 -----END PGP SIGNATURE-----

Merge tag 'at91-5.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt

AT91 DT for 5.3

 - switch to new sckc bindings
 - convert soc bindings to json-schema

* tag 'at91-5.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  dt-bindings: arm: Convert Atmel board/soc bindings to json-schema
  ARM: dts: at91: sama5d3: switch to new sckc bindings
  ARM: dts: at91: at91sam9rl: switch to new sckc bindings
  ARM: dts: at91: at91sam9g45: switch to new sckc bindings
  ARM: dts: at91: at91sam9x5: switch to new sckc bindings
  ARM: dts: at91sam9261ek: remove unused chosen nodes

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:49:42 -07:00
Olof Johansson
9c644f83ea arm64: tegra: Device tree changes for v5.3-rc1
This contains the bulk of the Tegra changes this cycle. It has a bunch
 of improvements across almost all boards. These are mostly small and not
 too exciting additions.
 
 Most notably perhaps is the continuation of Jetson Nano support, which
 is now mostly on feature parity with Jetson TX1.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCAAxFiEEiOrDCAFJzPfAjcif3SOs138+s6EFAl0M7HYTHHRyZWRpbmdA
 bnZpZGlhLmNvbQAKCRDdI6zXfz6zoeIUD/9udVMjomFq6udm5zzCazIsg7Aab3/4
 ctSLRppFCsiC01BInPTTwSPh0Lv0LJ5EALvIXIDyyel9xApJ66kOCQAVqVCyPUmv
 exqGTsKX44EzAYA2DVJR+qFDqPG4RD37PiBPkys7q7+H+sA8mz+dBNDckv76VYP5
 04xbv3rWC3NAs31i6NuiPitoSxpKBwfvguSdGS0BII8soI0yhilvqNnZp08XRdx7
 0W2AlOZvqFvti7288xeQPk57LJaR6pE7rnb1B5bPJwEzl7zRnu7A20u99xVZclTx
 XtHVXj5c52hVO1DKQ1mUL01xiA6Q0Ru+cfhLiEjaBot4MVoDkL0djeZYWG+Z1TWq
 NdKOaoi1Qiwpd6YbzyCWMvurFt8ZW2QDbu8hGf/jzI6TIogcajVC9gzm82kFnfu3
 1OefivyVx0WiXsTn+yIBI0NAiza5joZgh9fdX7R38l89oOx3VrQwyClJKFNSbkwV
 veI7UTLTZ2iKIwTwEoBaP2kO4SZKZ3/uvXdz89Pck8UooIeC9yU3aqcMZCyInXmn
 +MQlGiI2n5IIRbmNMKNHeece1gDzuvo9RSqzonwxNG3Zvt4J2bbfv7Q91itAJMjr
 mq8vNmVutfS36zgzcfbhfkPVO8hHX4OxOHWISZOtXbyCSzfY3j/HTuPRSLZBU2XZ
 xMFsMfefTEtcWA==
 =Ea0t
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-5.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.3-rc1

This contains the bulk of the Tegra changes this cycle. It has a bunch
of improvements across almost all boards. These are mostly small and not
too exciting additions.

Most notably perhaps is the continuation of Jetson Nano support, which
is now mostly on feature parity with Jetson TX1.

* tag 'tegra-for-5.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (28 commits)
  arm64: tegra: Enable PCIe slots in P2972-0000 board
  arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT
  arm64: tegra: Add PEX DPD states as pinctrl properties
  arm64: tegra: Enable ACONNECT, ADMA and AGIC
  arm64: tegra: Add ACONNECT, ADMA and AGIC nodes
  arm64: tegra: Sort device tree nodes alphabetically
  arm64: tegra: Fix Jetson Nano GPU regulator
  arm64: tegra: Update Jetson TX1 GPU regulator timings
  arm64: tegra: Fix AGIC register range
  arm64: tegra: Add INA3221 channel info for Jetson TX2
  arm64: tegra: Enable PWM on Jetson Nano
  arm64: tegra: Enable CPU sleep on Jetson Nano
  arm64: tegra: Add ID EEPROMs on Jetson Nano
  arm64: tegra: Add ID EEPROM for Jetson TX2 Developer Kit
  arm64: tegra: Add ID EEPROM for Jetson TX2 module
  arm64: tegra: Add ID EEPROM for Jetson TX1 Developer Kit
  arm64: tegra: Add ID EEPROM for Jetson TX1 module
  arm64: tegra: Don't use architected timer for suspend on Tegra210
  arm64: tegra: Mark architected timer as always on
  arm64: tegra: Add pin control states for I2C on Tegra186
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:48:32 -07:00
Olof Johansson
b9569a3cc3 STM32 DT updates for v5.3, round 1
Highlights:
 ----------
 
 MPU part:
  -Add stm32mp157a-avenger board support:
   This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
   , 1024MB of DDR3 and STPMIC1A pmic . Several connections are available on this boards:
   2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG, ethernet
   10/100/1000, WiFi 5 GHz & 2.4GHz, ...
  -Add STMFX support en stm32mp157c-ev1 and enable joystick connected on
   it.
  -Add I2S and SAI support on stm32mp157c.
  -Add and enable support of Vivante GPU on stm32mp157 ED1 and DK1 boards
   (EV1 and DK2 inherit of it).
  -Add camera support:
   -Add DCMI support on stm32mp157c SOC
   -Enabled OV5640 camera support on stm32mp157c-ev1 board
  -Enable hdmi bridge sii9022 & display controller on stm32mp157c-dk1
   board.
 
 MCU part:
  -Add STMFX support en stm32746g-eval and enable connections on it:
   leds and joystick
 -----BEGIN PGP SIGNATURE-----
 
 iQJMBAABCgA2FiEEctl9+nxzUSUqdELdf5rJavIecIUFAl0M6c8YHGFsZXhhbmRy
 ZS50b3JndWVAc3QuY29tAAoJEH+ayWryHnCFRfgP/i5BxDdRTYvDKY+DCNDZm/yf
 Cs4t8Ta25ilAKlCEEig2ZrsROcymwa875AJL+V/HSpY35hQHk6vXaA3iB2lE3VuA
 RDXnQ17d3ZQ5m6DDt7nsjL2gwfE+XKZKPxBAOLDJxAF5aNhDx85V19cDnvuZDtdl
 CJk9wAXdwX3BI8VtFFMPUpedFTGgCtccYKVN1U1zYB+GlvyMbm3NZiikJGB6u699
 2tg6h2IUf6k569VnrNiNkIVxVuKQdJfOUzuDiVmsq0vItjvRcmXmHO/kdYAkT2ml
 lsifua1Ef/udL/eF2G8NAuWVSLaEc4XRJ9kxv93fXsTYrotMxxl0raZkmXATIzmr
 qR10vtbFJCw9LkJjlTQf/kNLGmWl+aMUL7XbOhTBe8Hjn9mMX5v2Ve6TFn03301O
 UH9lmUXApYAyPKbfnskz8pi8agkfMGW8Y4Ce921BnZ/x7LTelFcUzaymBVX1q+cW
 lTQYKs+jVA8opfKmbPiCzY4AUpjHUkytwqVx1TXLF2oBxTle2BHGlJiSSozrtK9i
 zqXb5zyDGj/5Cd6phowMTKZzlIf8MTda33szzS85k6H/t+vnrFBUm6xi4P/ey7Pq
 5Vj4oC9ARVNjMFgNnUu25AeD6KB5JVjqtKEtQHku7gP9Vjfuitl5/6vVLN14e9G1
 /aJRieeJZZPbZVpjyIrV
 =3ZUA
 -----END PGP SIGNATURE-----

Merge tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.3, round 1

Highlights:
----------

MPU part:
 -Add stm32mp157a-avenger board support:
  This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
  , 1024MB of DDR3 and STPMIC1A pmic . Several connections are available on this boards:
  2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG, ethernet
  10/100/1000, WiFi 5 GHz & 2.4GHz, ...
 -Add STMFX support en stm32mp157c-ev1 and enable joystick connected on
  it.
 -Add I2S and SAI support on stm32mp157c.
 -Add and enable support of Vivante GPU on stm32mp157 ED1 and DK1 boards
  (EV1 and DK2 inherit of it).
 -Add camera support:
  -Add DCMI support on stm32mp157c SOC
  -Enabled OV5640 camera support on stm32mp157c-ev1 board
 -Enable hdmi bridge sii9022 & display controller on stm32mp157c-dk1
  board.

MCU part:
 -Add STMFX support en stm32746g-eval and enable connections on it:
  leds and joystick

* tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (27 commits)
  ARM: dts: stm32: replace rgmii mode with rgmii-id on stm32mp15 boards
  ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A
  dt-bindings: arm: stm32: Document Avenger96 devicetree binding
  dt-bindings: arm: stm32: Convert STM32 SoC bindings to DT schema
  ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157
  ARM: dts: stm32: add sai id registers to stm32mp157c
  ARM: dts: stm32: add power supply of rm68200 on stm32mp157c-ev1
  ARM: dts: stm32: enable display on stm32mp157c-dk1 board
  ARM: dts: stm32: Add I2C 1 config for stm32mp157a-dk1
  ARM: dts: stm32: enable OV5640 camera on stm32mp157c-ev1 board
  ARM: dts: stm32: add DCMI pins to stm32mp157c
  ARM: dts: stm32: add DCMI camera interface support on stm32mp157c
  ARM: dts: stm32: enable Vivante GPU support on stm32mp157a-dk1 board
  ARM: dts: stm32: enable Vivante GPU support on stm32mp157c-ed1 board
  ARM: dts: stm32: Add Vivante GPU support on STM32MP157c
  ARM: dts: stm32: add i2s pins muxing on stm32mp157
  ARM: dts: stm32: add i2s support on stm32mp157c
  ARM: dts: stm32: add sai pins muxing on stm32mp157
  ARM: dts: stm32: add sai support on stm32mp157c
  ARM: dts: stm32: add jedec compatible for nor flash on stm32mp157c-ev1
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:47:55 -07:00
Adrian Hunter
aba44287a2 perf scripts python: export-to-postgresql.py: Export Intel PT power and ptwrite events
The format of synthesized events is determined by the attribute config.
For the formats for Intel PT power and ptwrite events, create tables and
populate them when the synth_data handler is called. If the tables
remain empty, drop them at the end.

The tables and views, including a combined power_events_view, will
display automatically from the tables menu of the exported
exported-sql-viewer.py script.

Note, currently only Atoms since Gemini Lake have support for ptwrite
and mwait, pwre, exstop and pwrx, but all Intel PT implementations
support cbr.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25 08:47:10 -03:00
Adrian Hunter
5130c6e555 perf scripts python: export-to-sqlite.py: Export Intel PT power and ptwrite events
The format of synthesized events is determined by the attribute config.
For the formats for Intel PT power and ptwrite events, create tables and
populate them when the synth_data handler is called. If the tables
remain empty, drop them at the end.

The tables and views, including a combined power_events_view, will
display automatically from the tables menu of the exported
exported-sql-viewer.py script.

Note, currently only Atoms since Gemini Lake have support for ptwrite
and mwait, pwre, exstop and pwrx, but all Intel PT implementations
support cbr.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25 08:47:10 -03:00
Adrian Hunter
b9322cab17 perf db-export: Export synth events
Synthesized events are samples but with architecture-specific data
stored in sample->raw_data. They are identified by attribute type
PERF_TYPE_SYNTH.  Add a function to export them.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25 08:47:10 -03:00
Adrian Hunter
5fe2cf7d19 perf intel-pt: Synthesize CBR events when last seen value changes
The first core-to-bus ratio (CBR) event will not be shown if --itrace
's' option (skip initial number of events) is used, nor if time
intervals are specified that do not include the start of tracing. Change
the logic to record the last CBR value seen by the user, and synthesize
CBR events whenever that changes.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25 08:47:10 -03:00
Adrian Hunter
51b0918618 perf intel-pt: Add CBR value to decoder state
For convenience, add the core-to-bus ratio (CBR) value to the decoder
state.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25 08:47:10 -03:00
Adrian Hunter
91de8684f1 perf intel-pt: Cater for CBR change in PSB+
PSB+ provides status information only so the core-to-bus ratio (CBR) in
PSB+ will not have changed from its previous value. However, cater for
the possibility of a another CBR change that gets caught up in the PSB+
anyway.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25 08:47:10 -03:00
Adrian Hunter
abe5a1d3e4 perf intel-pt: Decoder to output CBR changes immediately
The core-to-bus ratio (CBR) provides the CPU frequency. With branches
enabled, the decoder was outputting CBR changes only when there was a
branch. That loses the correct time of the change if the trace is not in
context (e.g. not tracing kernel space). Change to output the CBR change
immediately.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25 08:47:10 -03:00
Kyle Meyer
9f94c7f947 perf tools: Increase MAX_NR_CPUS and MAX_CACHES
Attempting to profile 1024 or more CPUs with perf causes two errors:

  perf record -a
  [ perf record: Woken up X times to write data ]
  way too many cpu caches..
  [ perf record: Captured and wrote X MB perf.data (X samples) ]

  perf report -C 1024
  Error: failed to set  cpu bitmap
  Requested CPU 1024 too large. Consider raising MAX_NR_CPUS

  Increasing MAX_NR_CPUS from 1024 to 2048 and redefining MAX_CACHES as
  MAX_NR_CPUS * 4 returns normal functionality to perf:

  perf record -a
  [ perf record: Woken up X times to write data ]
  [ perf record: Captured and wrote X MB perf.data (X samples) ]

  perf report -C 1024
  ...

Signed-off-by: Kyle Meyer <kyle.meyer@hpe.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190620193630.154025-1-meyerk@stormcage.eag.rdlabs.hpecorp.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25 08:47:10 -03:00
Adrian Hunter
eb5d854456 perf thread-stack: Eliminate code duplicating thread_stack__pop_ks()
Use new function thread_stack__pop_ks() in place of equivalent code.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190619064429.14940-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25 08:47:10 -03:00
Adrian Hunter
97860b483c perf thread-stack: Fix thread stack return from kernel for kernel-only case
Commit f08046cb30 ("perf thread-stack: Represent jmps to the start of a
different symbol") had the side-effect of introducing more stack entries
before return from kernel space.

When user space is also traced, those entries are popped before entry to
user space, but when user space is not traced, they get stuck at the
bottom of the stack, making the stack grow progressively larger.

Fix by detecting a return-from-kernel branch type, and popping kernel
addresses from the stack then.

Note, the problem and fix affect the exported Call Graph / Tree but not
the callindent option used by "perf script --call-trace".

Example:

  perf-with-kcore record example -e intel_pt//k -- ls
  perf-with-kcore script example --itrace=bep -s ~/libexec/perf-core/scripts/python/export-to-sqlite.py example.db branches calls
  ~/libexec/perf-core/scripts/python/exported-sql-viewer.py example.db

  Menu option: Reports -> Context-Sensitive Call Graph

  Before: (showing Call Path column only)

    Call Path
    ▶ perf
    ▼ ls
      ▼ 12111:12111
        ▶ setup_new_exec
        ▶ __task_pid_nr_ns
        ▶ perf_event_pid_type
        ▶ perf_event_comm_output
        ▶ perf_iterate_ctx
        ▶ perf_iterate_sb
        ▶ perf_event_comm
        ▶ __set_task_comm
        ▶ load_elf_binary
        ▶ search_binary_handler
        ▶ __do_execve_file.isra.41
        ▶ __x64_sys_execve
        ▶ do_syscall_64
        ▼ entry_SYSCALL_64_after_hwframe
          ▼ swapgs_restore_regs_and_return_to_usermode
            ▼ native_iret
              ▶ error_entry
              ▶ do_page_fault
              ▼ error_exit
                ▼ retint_user
                  ▶ prepare_exit_to_usermode
                  ▼ native_iret
                    ▶ error_entry
                    ▶ do_page_fault
                    ▼ error_exit
                      ▼ retint_user
                        ▶ prepare_exit_to_usermode
                        ▼ native_iret
                          ▶ error_entry
                          ▶ do_page_fault
                          ▼ error_exit
                            ▼ retint_user
                              ▶ prepare_exit_to_usermode
                              ▶ native_iret

  After: (showing Call Path column only)

    Call Path
    ▶ perf
    ▼ ls
      ▼ 12111:12111
        ▶ setup_new_exec
        ▶ __task_pid_nr_ns
        ▶ perf_event_pid_type
        ▶ perf_event_comm_output
        ▶ perf_iterate_ctx
        ▶ perf_iterate_sb
        ▶ perf_event_comm
        ▶ __set_task_comm
        ▶ load_elf_binary
        ▶ search_binary_handler
        ▶ __do_execve_file.isra.41
        ▶ __x64_sys_execve
        ▶ do_syscall_64
        ▶ entry_SYSCALL_64_after_hwframe
        ▶ page_fault
        ▼ entry_SYSCALL_64
          ▼ do_syscall_64
            ▶ __x64_sys_brk
            ▶ __x64_sys_access
            ▶ __x64_sys_openat
            ▶ __x64_sys_newfstat
            ▶ __x64_sys_mmap
            ▶ __x64_sys_close
            ▶ __x64_sys_read
            ▶ __x64_sys_mprotect
            ▶ __x64_sys_arch_prctl
            ▶ __x64_sys_munmap
            ▶ exit_to_usermode_loop
            ▶ __x64_sys_set_tid_address
            ▶ __x64_sys_set_robust_list
            ▶ __x64_sys_rt_sigaction
            ▶ __x64_sys_rt_sigprocmask
            ▶ __x64_sys_prlimit64
            ▶ __x64_sys_statfs
            ▶ __x64_sys_ioctl
            ▶ __x64_sys_getdents64
            ▶ __x64_sys_write
            ▶ __x64_sys_exit_group

Committer notes:

The first arg to the perf-with-kcore needs to be the same for the
'record' and 'script' lines, otherwise we'll record the perf.data file
and kcore_dir/ files in one directory ('example') to then try to use it
from the 'bep' directory, fix the instructions above it so that both use
'example'.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Fixes: f08046cb30 ("perf thread-stack: Represent jmps to the start of a different symbol")
Link: http://lkml.kernel.org/r/20190619064429.14940-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25 08:47:10 -03:00
Numfor Mbiziwo-Tiapo
2d7102a045 perf tools: Fix cache.h include directive
Change the include path so that progress.c can find cache.h since it was
previously searching in the wrong directory.

Committer notes:

  $ ls -la tools/perf/ui/../cache.h
  ls: cannot access 'tools/perf/ui/../cache.h': No such file or directory

So it really should include ../../util/cache.h, or plain cache.h, since
we have -Iutil in INC_FLAGS in tools/perf/Makefile.config

Signed-off-by: Numfor Mbiziwo-Tiapo <nums@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>,
Cc: Luke Mujica <lukemujica@google.com>,
Cc: Stephane Eranian <eranian@google.com>
To: Ian Rogers <irogers@google.com>
Link: https://lkml.kernel.org/n/tip-pud8usyutvd2npg2vpsygncz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-25 08:47:09 -03:00
Olof Johansson
4cb0f05d37 mvebu dt64 for 5.3 (part 1)
For Armada 7K/8K:
  - enable AP806 thermal throttling with CPUfreq
  - add missing #interrupt-cells property allowing configuring
    interrupt for GPIO
 
 On Armada 8040 based board:
 - Fix PCI memory window on Mcbin board
 - Set SFP power limit on clearfog GT board
 - Disable AP I2C on Armada-8040-DB
 
 On Armada 3720 based board espressobin correct the SPI node used for
 NOR flash
 
 On Armada 7040 DB board add USB current regulators
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXQy4uwAKCRALBhiOFHI7
 1dW6AJ9EYqnK7TQxYcxXl/gy8E5zaTH8igCeKGKpjV0P2sUv66nC3pmdipvMP68=
 =KCf7
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt64-5.3-1' of git://git.infradead.org/linux-mvebu into arm/dt

mvebu dt64 for 5.3 (part 1)

For Armada 7K/8K:
 - enable AP806 thermal throttling with CPUfreq
 - add missing #interrupt-cells property allowing configuring
   interrupt for GPIO

On Armada 8040 based board:
- Fix PCI memory window on Mcbin board
- Set SFP power limit on clearfog GT board
- Disable AP I2C on Armada-8040-DB

On Armada 3720 based board espressobin correct the SPI node used for
NOR flash

On Armada 7040 DB board add USB current regulators

* tag 'mvebu-dt64-5.3-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: add missing #interrupt-cells property
  arm64: dts: marvell: armada-7040-db: Add USB current regulators
  arm64: dts: armada-3720-espressobin: correct spi node
  arm64: dts: marvell: Disable AP I2C on Armada-8040-DB
  arm64: dts: marvell: Enable AP806 thermal throttling with CPUfreq
  arm64: dts: marvell: Change core numbering in AP806 thermal-node
  arm64: dts: marvell: clearfog-gt-8k: set SFP power limit
  arm64: dts: marvell: mcbin: enlarge PCI memory window

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:47:08 -07:00