Commit graph

982,081 commits

Author SHA1 Message Date
Olof Johansson
2545de859c mvebu dt for 5.3 (part 1)
Add LCD support on Netgear RN104
 -----BEGIN PGP SIGNATURE-----
 
 iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXQyyfAAKCRALBhiOFHI7
 1ZPaAJ9AaFGTVnIuqe8EjZLOiKdO03oWMgCgm8Eu0d9566U2ibYCHCbHN0FbUpU=
 =F0cP
 -----END PGP SIGNATURE-----

Merge tag 'mvebu-dt-5.3-1' of git://git.infradead.org/linux-mvebu into arm/dt

mvebu dt for 5.3 (part 1)

Add LCD support on Netgear RN104

* tag 'mvebu-dt-5.3-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada: netgear-rn104: Add LCD to RN104 dts.

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:46:25 -07:00
Olof Johansson
d71036005f Renesas ARM64 Based SoC DT Updates for v5.3
* Renesas SoCs
   - Revise usb2_phy nodes and phys properties according to updated bindings
   - Use ip=on for bootargs
 
 * R-Car Gen 3 and RZ/G2M (r8a774a1) SoCs
   - Add dynamic power coefficient
   - Create thermal zone to support IPA
 
 * R-Car E3 (r8a77990) and D3 (r8a77995) SoCs
   - Point LVDS0 to its companion LVDS1
 
 * R-Car E3 (r8a77990) SoC
   - Corresct register range of DU
 
 * R-Car E3 (r8a77990) based Ebisu board
   - Remove renesas, no-ether-link property
 
 * R-Car D3 (r8a77995) based Draak board:
   - Remove unnecessary index from vin4 port
 
 * RZ/G2M (r8a774a1) based HiHope main and sub-boards:
   - Initial support
   - Describe CPU capacity and topoligy
   - Enable CMT, HDMI, LEDs, PCIe RWDT, SCIF, SDHI, TMU, and USB 2.0 and 3.0
 
 * RZ/G2E (r8a774c0) SoC based EK874 board:
   - Clean up CPU compatible strings
   - Enable: Bluetooth, HDMI audio and video, TPU, USB 3.0 and WLAN
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAl0MmxcACgkQ189kaWo3
 T75kSg//b3cCgBVkwq8CnUeoWG8qOXXSFU0YyigRv0sAsZEKpBik4cmPyB4KW/Kn
 BDfM3PCm9Xnq6e6O9xr4r+KHqw4Q27QYTcIIBVgkKqzx1iZi4lytO6H2R12Qjuap
 rFIEBRUlyXfKM/9iNcwiRRMLmYHgY/sYNOcWvn2Vb6X6B4uRA/2QkTL/mGo4XYMv
 FeOVlb1sIZravrru1RVE9wc1nLGk3t0Q9W5okZLMwVrfCIg8o8GwSxK7YOYKfB+p
 q7sA7rQOik61+2VDz2XdYRcS6BwlGJQXOTA/BgD457vsqLKI5wlmO66JcMMnEQo9
 efl0dJS+T/8AiEO11jG1lmT5gsU+nCAI8wK2r7Pa59EnDBZGIrwX67sd/wi9YE8K
 CZ/mP9yd/S/g4Ai/pEiVLlsWJOs0/hmXT3MxZhThvk3vdQ7oq3ada6JUUn17lhPS
 davs6l5wtKfcKSxAXja0Wc5g1TXGQ0UMsSMNJmqX6T3zfgwIb7y3Wvrx8P1B3/q4
 GYpnwBS2d7HISWhYQvaCbA3a5wnsbssjg2BmvOr0Nv0RgX0+qfmxADc2/vx9lcD7
 VlEbjTtWWTV2FtbvsOZSFfMYDXP/LXdI+VWXSu5NHKcybooC/cuUYzNVOBsYda/k
 pSOW/EIou8kC4XlRGh3Vf/JNU4PagujDRVojhUwkztcjm+dteeY=
 =Qsip
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM64 Based SoC DT Updates for v5.3

* Renesas SoCs
  - Revise usb2_phy nodes and phys properties according to updated bindings
  - Use ip=on for bootargs

* R-Car Gen 3 and RZ/G2M (r8a774a1) SoCs
  - Add dynamic power coefficient
  - Create thermal zone to support IPA

* R-Car E3 (r8a77990) and D3 (r8a77995) SoCs
  - Point LVDS0 to its companion LVDS1

* R-Car E3 (r8a77990) SoC
  - Corresct register range of DU

* R-Car E3 (r8a77990) based Ebisu board
  - Remove renesas, no-ether-link property

* R-Car D3 (r8a77995) based Draak board:
  - Remove unnecessary index from vin4 port

* RZ/G2M (r8a774a1) based HiHope main and sub-boards:
  - Initial support
  - Describe CPU capacity and topoligy
  - Enable CMT, HDMI, LEDs, PCIe RWDT, SCIF, SDHI, TMU, and USB 2.0 and 3.0

* RZ/G2E (r8a774c0) SoC based EK874 board:
  - Clean up CPU compatible strings
  - Enable: Bluetooth, HDMI audio and video, TPU, USB 3.0 and WLAN

* tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (53 commits)
  arm64: dts: renesas: hihope-common: Remove "label" from LEDs
  arm64: dts: renesas: hihope-common: Add HDMI support
  arm64: dts: renesas: r8a774a1: Add HDMI encoder instance
  arm64: dts: renesas: r8a774a1: Add dynamic power coefficient
  arm64: dts: renesas: r8a774a1: Create thermal zone to support IPA
  arm64: dts: renesas: r8a774a1: Add CPU capacity-dmips-mhz
  arm64: dts: renesas: r8a774a1: Add CPU topology on r8a774a1 SoC
  arm64: dts: renesas: hihope-common: Add LEDs support
  arm64: dts: renesas: hihope-common: Enable USB3.0
  arm64: dts: renesas: hihope-common: Add USB 2.0 support
  arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks
  arm64: dts: renesas: r8a774a1: Add TMU device nodes
  arm64: dts: renesas: r8a774a1: Add CMT device nodes
  arm64: dts: renesas: hihope-common: Add uSD and eMMC
  arm64: dts: renesas: r8a77990: Fix register range of display node
  arm64: dts: renesas: cat874: Enable usb role switch support
  arm64: dts: renesas: cat874: Enable USB3.0 host/peripheral device node
  arm64: dts: renesas: r8a7799[05]: Point LVDS0 to its companion LVDS1
  arm64: dts: renesas: hihope-common: Add RWDT support
  arm64: dts: renesas: hihope-rzg2-ex: Enable PCIe support
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:45:45 -07:00
Olof Johansson
cd75dd0058 Renesas ARM Based SoC DT Updates for v5.3
* Renesas SoC based boards
   - Use ip=on for bootargs
 
 * Renesas R-Car Gen 2 SOC based boards
   - Configure PMIC IRQ pinmux
 
 * R-Car V2H (r8a7792) SoC
   - Describe CMT devices in DT
 
 * RZ/G1C (r8a77470) based iWave SBC (iwg23s-sbc) and
   RZ/G1N (r8a7744) based boards:
   - Correct SDHI2 VccQ regulator to fix SDR50 mode
 
 * RZ/A2M (r7s9210) based rza2mevb EVB
   RZ/A1H (r7s72100) based rskrza1 board
   - Describe input switch in DT
 
 * RZ/A2M (r7s9210) based rza2mevb EVB
   - Sort nodes to ease future maintenance
   - Add USB host, Ethernet and SDHI support
 
 * RZ/A2M (r7s9210) and RZ/A1H (r7s72100) SoCs
   - Describe IRQC device in DT
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAl0MjzsACgkQ189kaWo3
 T75Niw/7BT5V9o55jLYBlMAzjLoFnZOm/LRW1Xxks4WbOcePsZsDFbg6NbsdbdrB
 gfs5O8F5qq9Owc0nfNlnifKZ2dPVX2h2TXx8LEEF1tNxhqR3ueZCQXToGwnVFLNS
 80pZAtilMnpR60eXBwHjpmhJb8gq94dmNgDaDcesi4RrStmIpKkkGqSJnTRE8CD2
 Gqx7UJ+XLvVWf9sldUIxGCV6wcwMh+Fv0dhBe+MObRcB+45zDfjgW3f32XWFAGwj
 h4An0Ka5fg9C/A39yKWcQtcSDEyVdHk09zm2mQYOds6xOxtgfpQwkyw+4YnW2dGf
 cNYok49+QUtj4IvbJCQevr9gm4lG8XlBU8dIqc3en1WWEbHHj8fXzbYBsKMqcB10
 htJhJpk6ea3uYuOPBWHRae2EQvJnagz4gijmzjf18IGXh5LtEVzNPZWwY/qplk7C
 PkBKa7cYUcrp25cNRSgJXCGakn6HSjujnVZB+HX6GVklrrc2LyuSkplwIZKA9xyd
 XFm2lytYUksjTRKnHTIK+9lfKG111FFsf070YEvgMK3yn40ty0ru6MDNey3mbpMf
 TWCAeuSzn6Cqj9+XmXSx8dMdHyXxieRtZGo36oKOMdWP6dlWl4cyRWRHr7Lpf7fU
 XFy0Jbm0Pyc4HBesvdWjwwfOMljtYfGH8JQU+IwC+jq+5Y/8XmU=
 =xc7g
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM Based SoC DT Updates for v5.3

* Renesas SoC based boards
  - Use ip=on for bootargs

* Renesas R-Car Gen 2 SOC based boards
  - Configure PMIC IRQ pinmux

* R-Car V2H (r8a7792) SoC
  - Describe CMT devices in DT

* RZ/G1C (r8a77470) based iWave SBC (iwg23s-sbc) and
  RZ/G1N (r8a7744) based boards:
  - Correct SDHI2 VccQ regulator to fix SDR50 mode

* RZ/A2M (r7s9210) based rza2mevb EVB
  RZ/A1H (r7s72100) based rskrza1 board
  - Describe input switch in DT

* RZ/A2M (r7s9210) based rza2mevb EVB
  - Sort nodes to ease future maintenance
  - Add USB host, Ethernet and SDHI support

* RZ/A2M (r7s9210) and RZ/A1H (r7s72100) SoCs
  - Describe IRQC device in DT

* tag 'renesas-arm-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits)
  ARM: dts: r8a7792: Add CMT0 and CMT1 to r8a7792
  ARM: dts: iwg23s-sbc: Fix SDHI2 VccQ regulator
  ARM: dts: iwg20d-q7-common: Fix SDHI1 VccQ regularor
  ARM: dts: rza2mevb: Add input switch
  ARM: dts: r7s9210: Add IRQC device node
  ARM: dts: rza2mevb: sort nodes of rza2mevb board
  ARM: dts: renesas: Use ip=on for bootargs
  ARM: dts: rza2mevb: Add USB Host support
  ARM: dts: r7s9210: Add USB Device support
  ARM: dts: r7s9210: Add USB Host support
  ARM: dts: rskrza1: Add input switches
  ARM: dts: r7s72100: Add IRQC device node
  ARM: dts: r8a779x: Configure PMIC IRQ pinmux
  ARM: dts: rza2mevb: Add 48MHz USB clock
  ARM: dts: r7s9210: Add USB clock
  ARM: dts: rza2mevb: add ethernet aliases
  ARM: dts: rza2mevb: Add SDHI support
  ARM: dts: rza2mevb: Add Ethernet support
  ARM: dts: r7s9210: Add SDHI support
  ARM: dts: r7s9210: Add RIIC support
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:44:18 -07:00
Olof Johansson
af647fc733 Renesas ARM Based SoC DT Bindings Updates for v5.3
* Renesas Gen3 DWC HDMI TX Encoder
   - Add RZ/G2M (r8a774a1) support
 
 * Renesas R-Car Compare Match Timer (CMT)
  - Add R-Car H3 (r8a7795), M3-N (r8a77965) and E3 (r8a77990) support
 
 * Renesas R-Car CAN FD Controller
   - Add R-Car M3-N (r8a77965) and E3 (r8a77990), and RZ/G2E (r8a774c0) support
 
 * Renesas R-Car CAN Controller
   - Add RZ/G2M (r8a774a1) support
   - Correct RZ/G2 clocks
 
 * Vendor prefixes: Add vendor prefix for HopeRun
 
 * Renesas SoCs and boards: Add HopeRun RZ/G2[M] boards
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE4nzZofWswv9L/nKF189kaWo3T74FAl0MnQsACgkQ189kaWo3
 T74YIg//Yns57xThkUR2ibgNDSxnp3umlHklnIpAqC1YyaCdzHk1gZponUFgGDKx
 eoP6g2Wixk6FKgyUkga+rR5jDqi6L79yRkZnKS7r8GckmICwIL4eu1tArfJzrIKG
 E3EQFst/Xgj0pmykbla5xnkys3y37G4pv7Uu2DgyqpJnez3AFC3Z4+fmoyfVjNJz
 /mQfL0vwy6NBzYQ9QHf+4RCdRQJ+44Xw8Fq0E3Gc0P346wyc/RhVyKfn1T9zaRjU
 s7uL37PLgEChmdoahSpCKeAPd6BDg3H0W62jHZYVM0eHtAZdMQDSYy+OnxPfjObR
 8KP9OanFmR9+NFpvygVjaleQE9rLg67gi1fXBbnCN1QBQ/FTYZpwfJeXrhaewTb4
 FXlpWu/nhrECDf7P6A50c0gJBV4m96G0sY5yQXw6hyWNQUYpFD3XFwyi5TP0Jaqg
 wOeZJsSQDozc1BH2v4yOPIUR+2a9AfT1DSoSc9fkydUw619XkaMsqeFoQ60nD4kZ
 chHkzE0v2oNlwTGj++GIiERXzm9tDvqyNbvrYKCQ1F7WuPWMXRlvyPd8ZZ5koIpz
 mJPQtqz1rVnoILOT7eCCsKA9Or2HwoEz+uUCtqbgYhDGicNEzQJF65ZZeqHLHHuJ
 KQWg2/pIX01rtq6OhHtfjuT+ggZ0QauS1lMzRuWOBrJtnFanwoU=
 =FrKn
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt-bindings-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM Based SoC DT Bindings Updates for v5.3

* Renesas Gen3 DWC HDMI TX Encoder
  - Add RZ/G2M (r8a774a1) support

* Renesas R-Car Compare Match Timer (CMT)
 - Add R-Car H3 (r8a7795), M3-N (r8a77965) and E3 (r8a77990) support

* Renesas R-Car CAN FD Controller
  - Add R-Car M3-N (r8a77965) and E3 (r8a77990), and RZ/G2E (r8a774c0) support

* Renesas R-Car CAN Controller
  - Add RZ/G2M (r8a774a1) support
  - Correct RZ/G2 clocks

* Vendor prefixes: Add vendor prefix for HopeRun

* Renesas SoCs and boards: Add HopeRun RZ/G2[M] boards

* tag 'renesas-dt-bindings-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  dt-bindings: display: renesas: Add r8a774a1 support
  dt-bindings: timer: renesas, cmt: Document r8a779{5|65|90} CMT support
  dt-bindings: can: rcar_canfd: document r8a774c0 support
  dt-bindings: can: rcar_canfd: document r8a77990 support
  dt-bindings: can: rcar_canfd: document r8a77965 support
  dt-bindings: can: rcar_can: Add r8a774c0 support
  dt-bindings: can: rcar_can: Fix RZ/G2 CAN clocks
  dt-bindings: Add vendor prefix for HopeRun
  dt-bindings: arm: renesas: Add HopeRun RZ/G2[M] boards

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:43:29 -07:00
Olof Johansson
8fbf1bb715 This time we only have a single patch for our command branch between
arm and arm64, a fix for the array syntax raised by our DT schemas.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyRegAKCRDj7w1vZxhR
 xQ7SAP9gWeCGiyq+N2lvgFUOMVUezlDcJx2IVjoJvSQcyjeD2QD/W0m+fldHe7BB
 PEv3s5BbYAYFHe+krqTPejcLK+c5hwg=
 =4UQl
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

This time we only have a single patch for our command branch between
arm and arm64, a fix for the array syntax raised by our DT schemas.

* tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sunxi: h3/h5: Fix GPIO regulator state array

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:42:05 -07:00
Olof Johansson
3264c72dcc Our usual bunch of arm64 DT changes, this time with:
- Some fixes for the DT schemas that were added during this release
   - Wifi support for the H6
   - LRADC suppport for the A64
   - Some background work on A64 boards, to enable various devices such
     as touchscreens, PMIC, audio, wifi, etc.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyQcQAKCRDj7w1vZxhR
 xbybAP9uAJcwix86BmYLIA3I7n1fT1oLooS+WfPL4btmqYBykAD/fK7Nn1g3alWg
 7c61AEJKDHZwObU1dNpxjvsjT+/u+Qc=
 =B/U5
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-dt64-for-5.3-201906210808' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Our usual bunch of arm64 DT changes, this time with:
  - Some fixes for the DT schemas that were added during this release
  - Wifi support for the H6
  - LRADC suppport for the A64
  - Some background work on A64 boards, to enable various devices such
    as touchscreens, PMIC, audio, wifi, etc.

* tag 'sunxi-dt64-for-5.3-201906210808' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: h6: Add DMA node
  arm64: dts: allwinner: a64: Add lradc node
  dt-bindings: input: sun4i-lradc-keys: Add A64 compatible
  arm64: dts: allwinner: h6: add r_watchog node
  arm64: dts: allwinner: h6: add watchdog node
  dt-bindings: watchdog: add Allwinner H6 watchdog
  arm64: dts: allwinner: a64: Enable audio on Teres-I
  arm64: dts: allwinner: a64: bananapi-m64: Enable PMIC USB power supply
  arm64: dts: allwinner: axp803: add USB power supply node
  arm64: dts: allwinner: a64: Add pinmux for RGB666 LCD
  arm64: dts: allwinner: a64: orangepi-win: Add wifi and bluetooth nodes
  arm64: dts: allwinner: h6: add PIO VCC bank supplies for Pine H64
  arm64: dts: allwinner: a64-oceanic-5205-5inmfd: Enable GT911 CTP
  arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP node
  arm64: dts: allwinner: a64: move I2C pinctrl to dtsi

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:41:39 -07:00
Olof Johansson
d12a73cf3a Our usual bunch of patches:
- Some work on the BPi M2-Berry to support various devices
   - Convert some bindings to a schema, and a lot of fixes reported by
     the schemas we introduced.
   - A few other fixes here and there
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXQyQTgAKCRDj7w1vZxhR
 xYkmAQDT7s1MRH9OEFQpS80BcWCvQoj0drr1ghHdXwwEbfuBUgEAoIuLrfH1Vjyi
 ZcEJwPGowLmSEZezVWSLqTL76iajJg4=
 =PAul
 -----END PGP SIGNATURE-----

Merge tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Our usual bunch of patches:
  - Some work on the BPi M2-Berry to support various devices
  - Convert some bindings to a schema, and a lot of fixes reported by
    the schemas we introduced.
  - A few other fixes here and there

* tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
  dt-bindings: pwm: Convert Allwinner PWM to a schema
  ARM: dts: sun8i: r40: Change the RTC compatible
  ARM: dts: sun8i: v3s: Add external crystals accuracy
  ARM: dts: sun8i: v3s: Fix the RTC node
  ARM: dts: sun6i: Add external crystals accuracy
  ARM: dts: sun6i: Fix RTC node
  ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface)
  ARM: dts: gr8-evb: Fix RTC vendor
  ARM: dts: sun7i: icnova-swac: Fix the model vendor
  ARM: dts: sun8i: a711: Change LRADC node names to avoid warnings
  ARM: dts: sun7i: olimex-lime2: Enable ac and power supplies
  ARM: dts: sun6i: Add default address and size cells for SPI
  ARM: dts: sun8i-h3: Fix wifi in Beelink X2 DT
  dt-bindings: bus: Convert Allwinner RSB to a schema
  ARM: dts: sun8i: r40: bananapi-m2-ultra: Remove regulator-always-on
  ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node
  ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI
  ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output
  ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller
  ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:40:52 -07:00
Olof Johansson
266050d80e ARM: dts: Amlogic updates for v5.3
- SPDX updates
 - switch to generic ethernet PHY reset bindings
 - add the canvas module
 - mxiii-plus board: add regulators
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl0L89UACgkQWTcYmtP7
 xmUu1A/6A5mbkoyYCxMoSeXpW7mQlI3BeV7MI2uIrtv//t9HvVhUSJfiMfHweb8l
 zwif2QT58nzBuleaAFxEmabveVc16UNkhOyKcaQ4TReotndLhv2y30L+YhEgbV7X
 BWbWMMt+1cJujngsUXgvTrvCyyltAVAZ/QKIkShqVeX3Bg8XzmOeVh2hxaAmUuQ+
 EBZoubt/COUiZGAof6VYmLzxG+X1eFf5TCUcTolzFXeII1RS1w45UqbGztrUgn6L
 IFmkiuTwMgIhM9do2TpJlXYyjio8XT5q/G/6xrxYi9Wrwad0v+NjGv0Lgkej0kq8
 1d9iHIG/asZc3UO3zDQ1kzxs8dI5I+MQUP3iopKbrnqFqJ7xkubCfiU4Ze+3JQTz
 lxalw3HIaiNdpxu7mBQqBAWR2J7Ba2srLTwckhqXiceJs9l9Wsijsv/ajHiHUrnI
 oNph5gfPiUD3KYUp/HPBQZOvZUqNYQLMV89FpDclJ/9aju2QslRQFq+ugNwZ4A14
 2H6C/DAHEQkr996itGKWI2/3sMP2tNOi1UuTeJmfeeFPqxK7ADkM55T9LsXKHWol
 e+9Msp2JwvYiOsLXCurfJ0LdGe5K5SwVUSZ6d4KgtOibUti5VgEsE3khZRu/CQzi
 PA6iW3q75I5sFs1LjcVJCT09ZsWju+qdEmgLhElGJMJZS4QqDPA=
 =kjgH
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: Amlogic updates for v5.3
- SPDX updates
- switch to generic ethernet PHY reset bindings
- add the canvas module
- mxiii-plus board: add regulators

* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson: switch to the generic Ethernet PHY reset bindings
  ARM: dts: meson8b: update with SPDX Licence identifier
  ARM: dts: meson8b-odroidc1: update with SPDX Licence identifier
  ARM: dts: meson8b-mxq: update with SPDX Licence identifier
  ARM: dts: meson8: update with SPDX Licence identifier
  ARM: dts: meson8-minix-neo-x8: update with SPDX Licence identifier
  ARM: dts: meson6: update with SPDX Licence identifier
  ARM: dts: meson6-atv1200: update with SPDX Licence identifier
  ARM: dts: meson: update with SPDX Licence identifier
  ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805
  ARM: dts: meson8m2: mxiii-plus: add the supply for the Mali GPU
  ARM: dts: meson8m2: mxiii-plus: rename the DCDC2 regulator
  ARM: dts: meson8b: add the canvas module
  ARM: dts: meson8m2: update the offset of the canvas module
  ARM: dts: meson8: add the canvas module

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:38:23 -07:00
Olof Johansson
19339e6a22 This pull request adds CPUFreq support for DA850 boards in device-tree
boot using the generic CPUFREQ_DT driver.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdC0qMAAoJEGFBu2jqvgRNSxMQAJHdPnwb6v4UOQBagv5T8mbz
 GbIwiQeIoc5/+z9zZ5+8Avrrbz32nLi/PE5Y3i+0sGxcGTTwbb2G7z43GloPlMHl
 YGyIfqzxuv4gM7FKaeWlSz7yNTrfWCaj5yTeLNQClYmV06sqXEDAL1OMn12BVAs4
 MGaie45nf5WJda2FcXQyhuGMTs0WHoghxh2ajU19aVZGWOf3SEqej7Ot9FhwqXtT
 wuZ6X52JDLaAHKv0n/zFvF/YxyUxvFm6swPZ+Bq+6GBlxYxlTIruMwShLjUWh/J1
 18ZuIgUG0Y1Tud3h44xnW3hWMY/jN4Pv+JmLdtJe8jO0l7taotxzHE2hck2FmnXV
 5NFwlwqzODAmpAL2Jm/LpGQDc40XPg4IDdWvIk7tseiuoO1z1zswWnvmNu707+Ml
 8kXjmk3X59Ms8rflc3rUr24no+K7vbiUEbJcPjr+EpB5KcKpLS7LHNhZRs1J4ilA
 TbfHMkbjHdO0wKUg+/sWdBRrLXR41uTsmpfkgvTNvOtdHq1AtgW3Jv2vHfQSyFXb
 cmN6SQIk8von0vjbIkdyWXSmOZln8ZpPpJO8cxXqzRqoopV/R4mxThEQ5uTfypNl
 +8Vp9p4zC0X6hdaXvgOQNdL3igFWcRXk8KEZOT5ddibWuXlXM6Siuy75tG4Y33j5
 N04CB4BniX37bBPPFtVi
 =AF9Z
 -----END PGP SIGNATURE-----

Merge tag 'davinci-for-v5.3/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/dt

This pull request adds CPUFreq support for DA850 boards in device-tree
boot using the generic CPUFREQ_DT driver.

* tag 'davinci-for-v5.3/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci_all_defconfig: Enable CPUFREQ_DT
  ARM: dts: da850-evm: enable cpufreq
  ARM: dts: da850-lcdk: enable cpufreq
  ARM: dts: da850-lego-ev3: enable cpufreq
  ARM: dts: da850: add cpu node and operating points to DT

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:37:18 -07:00
Olof Johansson
97dd7871d1 ASPEED device tree updates for 5.3
We have various device tree updates from the OpenBMC project to enable
 bits and pieces in existing systems, notably updates to Google's Zaius.
 
 There are some AST2500 machines under development:
 
   * Lenovo Hr630
   * IBM Swift
   * Facebook YAMP
 
 And some AST2400 machines that have been around but out of tree and have
 now joined the party:
 
   * YADRO VESNIN
   * Microsoft Olympus
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAl0LMRUACgkQa3ZZB4FH
 cJ65LBAAhtpaea/EsgjmRuEV22mrzY3YmDXL4uVahpoNftGdlrgPzBTSDXcxKbMI
 QiTuY2aCJLKLWHod/qpM//2kB0Y8EGLDT94ji6aglOy35+41PCPzAQ12SyPZ/hUx
 IofC8g0bqPkQiaUq9QRnQE9ns9jOr0nEArEBt/R0clgdOhgMl0NCrbI6rc7XBLfN
 L1tMUxhVMfn71nyE4Q1nkMEMdLsxHIRl12sg2pboTVtoes+LBj+ZQ/7AEXkYjxaL
 DSmLVwQwVES3+8rgcSxdtR/pB/H4SLZXst2tlf8I4AVafVUAHkZG7dsFUKnIC2qM
 q2cn0IlAnVshwtbdYWZ6w1kWQSZEuasRdhQCUjCedMDkT52NQTOaeVclpe2wjPk4
 F9WrPUFAkefxvD3MAog2WO8ORYs/cRyysIt+LxU+sv14qToTxcgrUwxLn/S6R7b9
 qK+vmMxxu2B/VLfemcFHvlg19thU2GaDiHf427fXat1vqGDEADzTVyYNFaN5RbB+
 hBg1OLm+vfki9uQ++bYuek4zYvgubSflxy+BwAtA0Xi34ayfPYCUiX/ntVHwHK1j
 p/oewNu+23GxV5XohkTsVPIJnnhrktw2MzPoFQEL4Fqv5QeumdlQyBpvG9EYu88C
 D5cUfCzTR5uX5/cz5R8Jaa5De9qbf5fLK9HGyLgkSjzpHruLX3o=
 =Hwcm
 -----END PGP SIGNATURE-----

Merge tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt

ASPEED device tree updates for 5.3

We have various device tree updates from the OpenBMC project to enable
bits and pieces in existing systems, notably updates to Google's Zaius.

There are some AST2500 machines under development:

  * Lenovo Hr630
  * IBM Swift
  * Facebook YAMP

And some AST2400 machines that have been around but out of tree and have
now joined the party:

  * YADRO VESNIN
  * Microsoft Olympus

* tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: Enable video engine on romulus and wtherspoon
  ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine
  ARM: dts: aspeed: Add YADRO VESNIN BMC
  ARM: dts: aspeed: Add Microsoft Olympus BMC
  ARM: dts: aspeed: Adding Lenovo Hr630 BMC
  ARM: dts: aspeed: Add Facebook YAMP BMC
  ARM: dts: aspeed: swift: Add pca9539 devices
  ARM: dts: aspeed: Add Swift BMC machine
  ARM: dts: aspeed: cmm: enable ehci host controllers
  ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots
  ARM: dts: aspeed: zaius: update 12V brick I2C address
  ARM: dts: aspeed: zaius: add Infineon and Intersil regulators
  ARM: dts: aspeed: quanta-q71: Enable p2a node
  ARM: dts: aspeed: Add aspeed-p2a-ctrl node
  ARM: dts: aspeed: Add Power9 and Power9 CFAM description
  ARM: dts: aspeed: Rename flash-controller nodes

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:35:02 -07:00
Olof Johansson
791c6fdb0b Qualcomm Device Tree Changes for v5.3
* Add display support to MSM8974
 * Add display, backlight, and touchscreen support to MSM8974 Hammerhead
 * Update coresight bindings for MSM8974 and APQ8064
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdCeMbAAoJEFKiBbHx2RXV8ikQAKrkShMW6iBQ1v/dnyHsNvI5
 rG0w2BKk6YVUjcP0DMgKMtVwvLCmk8sW1Hj9ZOO+eE/M0pNTmWzyeVlAqPW580WT
 Bu9RWzRrQud2shx9uXMsQypcIA/t5zJ6TtbkG6VXFodYVUAMWQCnjWIH3TEPMwOp
 HcZdz4bUVL7+mD20dXy4RTz6ZRaNEYf+IQUrc2WJehzv5IbIjS9UD1zzNeswEb/t
 rBNa5quvSYC9sc5eKC6tt4qrnbU3urFZp5ugOCl9hgEkEpHrFeDf2QNUjKqHqdx/
 xCPzFZpu61syRTivpykwvbwOkjqoYoT8+/RhcyPDYQiuMhcTr8XcTgRC1XVsm0Xd
 OVU+XXOdaA9GqVWKc20rPbXWpMejM7LZQLpWwPr6Y/z2nTEUlNH+vCMcS4z4zvZS
 7jIA/kRR1v0N0LO1644etthVGxmzTX0u+iLyjhAO7TItwdKsaCXygRjlR1GIjie7
 fwUSXvZTwBpw38+mQj0QEe8N7HQBaRhRIMB8CYs/s+ktdT3flgw2VD1tqU5jXETA
 syzKVcUjjoKkHo1ezErR+Zy8q/K43EqUbxbed0VWN0vvUAXxtnFzJPwhlRg5bpk5
 bGwVvBxeA6cn+3HDtVWecBlztTfyV2w2hNQsJ7NU2X3j5KWE/ynX8IJ+Ibns4uE7
 mON/7w9XG7d17CjY/vNE
 =q1ev
 -----END PGP SIGNATURE-----

Merge tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm Device Tree Changes for v5.3

* Add display support to MSM8974
* Add display, backlight, and touchscreen support to MSM8974 Hammerhead
* Update coresight bindings for MSM8974 and APQ8064

* tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: dts: qcom: msm8974-hammerhead: add support for display
  ARM: dts: msm8974: add display support
  ARM: dts: qcom: msm8974-hammerhead: add support for backlight
  ARM: dts: qcom: msm8974-hammerhead: add touchscreen support
  ARM: dts: qcom-msm8974: Update coresight DT bindings
  ARM: dts: qcom-apq8064: Update coresight DT bindings

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:32:08 -07:00
Olof Johansson
750ee7858f Qualcomm ARM64 Updates for v5.3
* Switch to use second gen PON on PM8998
 * Add PSCI cupidle states for MSM8996, MSM8998,and SDM845
 * Add MSM8996 UFS phy reset controller
 * Add propre cpu capacity scaling on MSM8996
 * Fixups for APR domain, legacy clocks, and PSCI entry latency on MSM8996
 * Enable SMMUs on MSM8996
 * Add Dragonboard 845C
 * Add Q6V5, GPU, GMU, and AOSS QMP node on SDM845
 * Fixup CPU topology on SDM845
 * Change USB1 to be peripheral on SDM845 MTP
 * Add PCIe Phy, RC nodes, ANOC1 SMMU, and RPMPD node on MSM8998
 * Update coresight bindings for MSM8916
 * Update idle state names and entry-method on MSM8916
 * Add PCIe, RPMPD, LPASS, Q6, TCSR, TuringCC, PSCI cpuidle states,
   and CDSP on QCS404
 * Add reset-cells property to QCS404 GCC node
 * Fixup s3 max voltage, l3 min voltage, drive strength typo, and
   s3 supply definition on QCS404-evb
 * Fixup ADC outputs and VADC calibration on PMS405
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdCxE1AAoJEFKiBbHx2RXV4C0P/iL1rMy36S+SNYPCQgBGwtNn
 NcgZ+3SFQpXjTKAQ7U0bnRHaEm3vQeMicD5A5sBg39XCVBvSu3/ilx0RoYnYc294
 daP41C0ux0zXq/xPAoISCdK7ifJfGMpM0w4VPTKF1jis0hVsS74wUDHvMZc0cuzU
 CA2Dsj1QMx0h6OhOgeM+J7n1kkhQnI6V1Pn7d3cFPf4jU4owsBP4HqN3X1yBvR0J
 SeGKvdfEL+hpOVANmUZWDpXKOGWpJc/njChbl/9ylIhKbgenEpuz5rAegYVg2qgZ
 E1EBJgZrLBMDPu9mE4OqngkEeP1LMQs5E3f7SGTyyLWivDGTimfKYJIb5OJVuv3x
 tvvi0jgfVGs2LEHyONFugZgRaz3MpzAO5QjYyhyfJOe33BGDew762swCA4xwIyB0
 xYkCqJCTDz/aTaa2sjH9hYMX5vTKMcvXJyL2YUfPTOL6zOfWn4kdQFmLF3cGjEp2
 qrjWe2odrc51KKFPB5v0AhAeoA6WSvh1oCGa1DypkzKw0yg0N5g9QG2iAhNwvEoA
 fH49DStRYUaXu1YohmtDBj02DlzruYB3CUMQ5KMFT/Tjpk+v1TfnVQQJjwttA4gr
 GsDkgy/njWsexwykdH3oGDBKInId2umgN5bAKBf2p70sd0Zq+JIAer4yWvhwqoSe
 0Ves83rt9vN1s5kS18KB
 =1nUY
 -----END PGP SIGNATURE-----

Merge tag 'qcom-arm64-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 Updates for v5.3

* Switch to use second gen PON on PM8998
* Add PSCI cupidle states for MSM8996, MSM8998,and SDM845
* Add MSM8996 UFS phy reset controller
* Add propre cpu capacity scaling on MSM8996
* Fixups for APR domain, legacy clocks, and PSCI entry latency on MSM8996
* Enable SMMUs on MSM8996
* Add Dragonboard 845C
* Add Q6V5, GPU, GMU, and AOSS QMP node on SDM845
* Fixup CPU topology on SDM845
* Change USB1 to be peripheral on SDM845 MTP
* Add PCIe Phy, RC nodes, ANOC1 SMMU, and RPMPD node on MSM8998
* Update coresight bindings for MSM8916
* Update idle state names and entry-method on MSM8916
* Add PCIe, RPMPD, LPASS, Q6, TCSR, TuringCC, PSCI cpuidle states,
  and CDSP on QCS404
* Add reset-cells property to QCS404 GCC node
* Fixup s3 max voltage, l3 min voltage, drive strength typo, and
  s3 supply definition on QCS404-evb
* Fixup ADC outputs and VADC calibration on PMS405

* tag 'qcom-arm64-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (39 commits)
  arm64: dts: qcom: qcs404-evb: fix vdd_apc supply
  arm64: dts: qcom: pm8998: Use qcom,pm8998-pon binding for second gen pon
  arm64: dts: qcom: msm8996: Enable SMMUs
  arm64: dts: qcom: msm8996: Correct apr-domain property
  arm64: dts: qcom: Add Dragonboard 845c
  arm64: dts: qcom: qcs404-evb: Enable PCIe
  arm64: dts: qcom: qcs404: Add PCIe related nodes
  arm64: dts: qcom: msm8998: Add PCIe PHY and RC nodes
  arm64: dts: qcom: msm8998: Add ANOC1 SMMU node
  arm64: dts: qcom: msm8996: Stop using legacy clock names
  arm64: dts: msm8996: fix PSCI entry-latency-us
  arm64: dts: qcom: msm8998: Add PSCI cpuidle low power states
  arm64: dts: qcom: sdm845: Add Q6V5 MSS node
  arm64: dts: qcom: Add AOSS QMP node
  arm64: dts: qcom-qcs404: Add reset-cells to GCC node
  arm64: dts: qcom-msm8916: Update coresight DT bindings
  arm64: dts: qcom: msm8998: Add rpmpd node
  arm64: dts: qcom: qcs404: Add rpmpd node
  arm64: dts: qcom: qcs404: Move lpass and q6 into soc
  arm64: dts: qcom: qcs404: Fully describe the CDSP
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:31:37 -07:00
Olof Johansson
0914acd87f ARM: DT: Hisilicon ARM32 SoCs updates for v5.3
- Updated CoreSight funnel and replicator using new bindings to fix warning
   for the hip04.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdCloiAAoJEAvIV27ZiWZcnLQP/Az5KoBhY1q9ve5jF/2vRKHU
 /vWlNp9fYpndza5XGOTFa53/59mI/D7BWUKPcLZ9V9weof8dVD+IDffAZrNozUTs
 anfvn2S7ZlpGxnSnNnDLELk2mAe9jq8JwCi/wPlkHcO7dn55LTREBSRJSDQJj9mg
 5YZmSN/1DM0aw85/PB2P69r1Ri5VNGOpNMEWv8mZGt8DhKfeW0/UMv4r7pzrgkr7
 MEyWopNoe/Ca0u6GjJWz4aSCgmI12IkXkZETYVGEvYnWHMZxzIaPXCuEnyo9aqvW
 L8zMPtVF7yIJcnv2JR8Dwv3VS1b6amThQiHBq4oKWJjZrJzlOA3XHbvLdkwYTOkl
 b2Xls0R/kgetHRoD27imIMMYL81Ftv3gyL8FV0zRybrKWL43tk5rYKgB/NXbZv3U
 02M9jK5BQlnzDVdhg56UWK/Ish3JhbHMbDbUPB/X72eA/2wEb3qJeBrxsVwr6cJx
 UmMOOL4TkKcP6KRGe0SNd6NhX4Go9H+3zlPAGrfU8pEMQF5FqW8BnThb50+AsWTk
 EpwjMudBtAv8eNHbBQonN0VnB3OeWQQUP2B5B5/RT1NNxFG8UFvQdM5pWSKi29tD
 wBmON4jJuwUdPbLbo9LaqEFA4w2IcSOPmvELc6d2t2fv4cFNScic9tITVmWQCZRs
 cdgbu5cMFjqTs25G1zqB
 =vaAE
 -----END PGP SIGNATURE-----

Merge tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi into arm/dt

ARM: DT: Hisilicon ARM32 SoCs updates for v5.3

- Updated CoreSight funnel and replicator using new bindings to fix warning
  for the hip04.

* tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi:
  ARM: dts: hip04: Update coresight DT bindings

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:30:50 -07:00
Olof Johansson
80f7f92c16 ARM64: DT: Hisilicon SoCs DT updates for v5.3
* Hi3660 SoC and related boards:
   - Added CoreSight trace components
 
 * Hi6220 SoC and related boards:
   - Updated CoreSight funnel and replicator using new bindings to fix warning
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJdClO7AAoJEAvIV27ZiWZcHyUP/AiRfT+Z6HofsnA1G+hq+6tJ
 AMHp6cYxuyZW0Bfx/sfRUNVZL6l4go4wX3XO4KW6D7UQjXwmyenHRlfei1SEeXtl
 pTbq2WCprmElESj33ByruIPRxT8Rk3VTgjhE8rooociA+1t8+ATAwoj/zJLSXnPP
 V9MZDWKAmSBAE9uhVWo2EGORZmUJOnIl5yRjGpCdadl5ZA6epQginIPfI1HMZCtL
 LzMbt08bxTiLD9mbSeSJdTxvwMEUhCcXaC9zOyYcoLqsSwYatfK8XVFJxQjmetbt
 HDDbKY78Ya0ZXmgCsUpn/I0gzxGPhAIHyA7wi1ogf6rkP4kHy1cUtjgugMp4ZqLP
 9Jnc671o2x4OSc/2R7tZzFsCQE7ebJ9zaeQ6ZKwfyy6Tr1xaYXqmAa8m5g0AEu7+
 iwiRv6Sl6/lSvN285RFS6uuMR+gH/oQjOATlgJqOVarRkbG/wEkM+We+QZiwK5fu
 M60qsCeZfmFY7VxO9KvSxI53j6etGiAlITOF6/TV+QG8VdrlUyyfoLVcxSjTESlE
 u82+GM6iGNLRYUcqllDQ70roUSy1N5LA4nOu4LsJxc96su/tm+jdqD7BqpiKOMIX
 pfq+n3+ZYafrV2zKIS0Qf6j+4eW2NszdtSZty5LktaGNHl9zlq1+De+qjajCiMN5
 f4rrCYsEdYp8PV5VTLTg
 =GTKf
 -----END PGP SIGNATURE-----

Merge tag 'hisi-arm64-dt-for-5.3' of git://github.com/hisilicon/linux-hisi into arm/dt

ARM64: DT: Hisilicon SoCs DT updates for v5.3

* Hi3660 SoC and related boards:
  - Added CoreSight trace components

* Hi6220 SoC and related boards:
  - Updated CoreSight funnel and replicator using new bindings to fix warning

* tag 'hisi-arm64-dt-for-5.3' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hi3660: Add CoreSight support
  arm64: dts: hi6220: Update coresight DT bindings

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:30:13 -07:00
Olof Johansson
e73f65930f i.MX fixes for 5.2, round 3:
- A recent testing by Sébastien discovers that the PWM interrupts of
    i.MX6UL were wrongly coded in device tree.  It's a fix for it.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJdEXKFAAoJEFBXWFqHsHzOnh4H/RVNWE/NwhLlcqXHnRq4TPpi
 CdKQ9ZdXYWfi7SkFQJK8bYefklxfY7JUg4Pa/igTbkyeuwpHQugkYRK7is/jsEcd
 TZSCllyvbn4QIOCZJiRsWd3/soEryjaQmZcHTVRLTJXZKhTPB89MuTX7j1BmGd22
 SiSCTRtgVRWOY0ORF9oMtjNq1BiHEtf8M7GwvkifhlZCUh3pyqI7sqg+Zer/CEmM
 TCOpDc42x56igw36/H/TMKyRQestYNlp8AKxg1cagwNrrLNE4D3Icm5UHdd44KuT
 cS5O68BQxUldhfgdejfIZUvVguVlYQkuEZbCW/l18GdiK9IECW/xZRliBqO8RSw=
 =Gn7a
 -----END PGP SIGNATURE-----

Merge tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.2, round 3:
 - A recent testing by Sébastien discovers that the PWM interrupts of
   i.MX6UL were wrongly coded in device tree.  It's a fix for it.

* tag 'imx-fixes-5.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6ul: fix PWM[1-4] interrupts

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:20:08 -07:00
Olof Johansson
4232db2e2a ARM: dts: Amlogic fixes for v5.2-rc
- fix GPU interrupts and operating voltage
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEe4dGDhaSf6n1v/EMWTcYmtP7xmUFAl0LBHEACgkQWTcYmtP7
 xmWjuw//aSfw9ezjFFhwVC2yEBb/lY85VSp5kA6R8p7TsieCFOU+qhY6zfhebu4x
 DRJ5vtrQ8s+FaRwTCoOfupSbRXwN4WyN6SJVhYEwR/Jj4ExMxtWvKc7NoSIi1xGl
 elvPEZ4wzoQ4eQIGKLwEa07vfSYKD03si9IWcp3TxEsmGMzzfhDyv2nT8ovS/t9B
 D0y2Y/s6A40q6Pr4eATzyLAVCVDScOVCtkYmX5OzPhgOD+5pBTQSt5TPzH03prqU
 dZ3cjOUmgvEt1WoZFajVJzngnN4qRTzVZnr9Aue4SS4qb0ytUrK9FtmnoU2LINbE
 cX+rciZuxeRIZiNE/2lxBz7S1R9HwWVzRdzLwaCemm9T0SlJ4CrU1sA+Mdk3eAVM
 Z6d3LYKm9Lbz99Jcy9sTbdjtrWJqYlucd9eJhjwfoQyk2gNuGQJvSWAHgLcw9N1O
 WWcf9Bocj+iQBtn1/uPVCYHgqZaAFndf8iz955Mj+edONeycUglclBmIXHpu4TNJ
 rFX3DalUsiGpHCto+9Hm9qGGXFnFE2FAimrtjeDKI7NcHQnGS1qgsWj/OTgGJVfD
 /iq7/EF27hpm1fX1bzLaWA3LIl5oW4ycksI8qHFfxONx6jXePVkI9gTG96HNbf9n
 XQ5xWcb1XaiG9Ox29sbqSkjrbLF4tGuoMtnkvZrFvLFAYWPEyIc=
 =SdFR
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/fixes

ARM: dts: Amlogic fixes for v5.2-rc
- fix GPU interrupts and operating voltage

* tag 'amlogic-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson8b: fix the operating voltage of the Mali GPU
  ARM: dts: meson8b: drop undocumented property from the Mali GPU node
  ARM: dts: meson8: fix GPU interrupts and drop an undocumented property

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:19:26 -07:00
Marcin Juszkiewicz
e737f13b50 arm64 defconfig: enable LVM support
W dniu 19.06.2019 o 16:21, Olof Johansson pisze:
> On Mon, Jun 17, 2019 at 06:04:09PM +0200, Marcin Juszkiewicz wrote:
>> Follow x86-64 defconfig on enabling basic LVM support.
>>
>> Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
>
> Do you need this to be =y? If you use LVM, you usually boot with a ramdisk that
> will hold modules.

Right. Forgot to change.

From 63003d0047062949a1231f67e1efdcb96b54323a Mon Sep 17 00:00:00 2001
From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Date: Mon, 27 May 2019 20:14:34 +0200
Subject: [PATCH 1/3] arm64 defconfig: enable LVM support

Follow x86-64 defconfig on enabling basic LVM support.

Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:17:53 -07:00
Olof Johansson
98d70a5cd9 This pull request contain Broadcom ARM-based SoCs Device Tree changes
for 5.3 please pull the following:
 
 - Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI
   controller
 
 - Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files
   and provides a fix for devices failing to boot after the removal of
   skelton.dtsi (that commit has been submitted as a separate fix)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAl0O5KUACgkQh9CWnEQH
 BwRdAw//VtoEfHJkk90iBmQKmeBW/0hG9QocqGrPuP/PYMOID2rnqut08r0Bvpcy
 7U0YKSVbdZbdSVG8MMNzmtX1SVthUBaQroC1wocXrJL0Onr8loD0RUorbL0gmsIY
 wci3rUEUEn5Zi4R8ihjB+27CLnHnoD+A2ZNETNR8bE2VIbX6jW7qfZA0qMlYJu/S
 7So2MKbQC7ei1XNcFufx4VF/ZfuaHcvkZtpcU5/leRgyOa/0MBux4CbDKmhjvywL
 Ork8/F/TsC882ys5IRWVqC2rmnqqhSv+vFQw3bqSMY5bN5pqIufeP9BtLyWRb+mV
 sIP8RxMGJCwvQU9rVqZz70V4ORaP5b2fkTFG84Hn4n5vjhoQADYuIdSREadO8rRk
 nAc9uZkCS1GRSLPQZqo5WoBCStNtqqYFc9kYJJ27c2JzkafHq3GTuL0F6p/GT9TF
 7hQUJRUsXwIJ0rLrtm4cesIUj9OY32Y0KN0M/jDJuAx8R5009x7u+TnddFRZbvG8
 hulX8G9XCImJ04yyts2s0TwFOlI+8XjTeWfaJQY+I5j0PXxuM+eLYV3MetGY+OL2
 1yKRBNE2mAs22VpQ2e70d5iMwwM/+ydu4aD3pRd0Q8sPMV7HfBLdNMxXaPovzjoA
 0SdZTB73PNpXqBdM1fMD1G7TG+rtGgn1gKyfrShdMRMnRqhB/5Q=
 =AQ6F
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contain Broadcom ARM-based SoCs Device Tree changes
for 5.3 please pull the following:

- Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI
  controller

- Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files
  and provides a fix for devices failing to boot after the removal of
  skelton.dtsi (that commit has been submitted as a separate fix)

* tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux:
  ARM: dts: BCM5301X: Fix most DTC W=1 warnings
  ARM: dts: NSP: Fix the bulk of W=1 DTC warnings
  ARM: dts: BCM63xx: Fix DTC W=1 warnings
  ARM: dts: BCM53573: Fix DTC W=1 warnings
  ARM: dts: bcm-mobile: Fix most DTC W=1 warnings
  ARM: dts: Cygnus: Fix most DTC W=1 warnings
  ARM: dts: Fix BCM7445 DTC warnings
  ARM: bcm283x: Enable DMA support for SPI controller
  ARM: dts: bcm: Add missing device_type = "memory" property

Signed-off-by: Olof Johansson <olof@lixom.net>
2019-06-25 04:15:53 -07:00
Dmitry Osipenko
d22b85a1b9
regulator: core: Expose some of core functions needed by couplers
Expose some of internal functions that are required for implementation of
customized regulator couplers.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25 12:15:35 +01:00
Dmitry Osipenko
d8ca7d184b
regulator: core: Introduce API for regulators coupling customization
Right now regulator core supports only one type of regulators coupling,
the "voltage max-spread" which keeps voltages of coupled regulators in a
given range from each other. A more sophisticated coupling may be required
in practice, one example is the NVIDIA Tegra SoCs which besides the
max-spreading have other restrictions that must be adhered. Introduce API
that allow platforms to provide their own customized coupling algorithms.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25 12:15:32 +01:00
Curtis Malainey
24043d60ff
ASoC: rt5677: depop stereo dac
Upon enabling the ASRC DAC we need a delay to avoid popping the
speakers.

Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Cc: Ross Zwisler <zwisler@chromium.org>
Tested-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-25 12:11:55 +01:00
Nicholas Piggin
e13e7cd4c0 powerpc/64s/exception: Fix machine check early corrupting AMR
The early machine check runs in real mode, so locking is unnecessary.
Worse, the windup does not restore AMR, so this can result in a false
KUAP fault after a recoverable machine check hits inside a user copy
operation.

Fix this similarly to HMI by just avoiding the kuap lock in the
early machine check handler (it will be set by the late handler that
runs in virtual mode if that runs). If the virtual mode handler is
reached, it will lock and restore the AMR.

Fixes: 890274c2dc ("powerpc/64s: Implement KUAP for Radix MMU")
Cc: Russell Currey <ruscur@russell.cc>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2019-06-25 21:04:27 +10:00
Lionel Landwerlin
8dcfdfb450 drm/i915/perf: fix ICL perf register offsets
We got the wrong offsets (could they have changed?). New values were
computed off an error state by looking up the register offset in the
context image as written by the HW.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 1de401c08f ("drm/i915/perf: enable perf support on ICL")
Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610081914.25428-1-lionel.g.landwerlin@intel.com
2019-06-25 14:03:05 +03:00
Lorenzo Bianconi
2dcb79cde6 mt76: mt7615: do not process rx packets if the device is not initialized
Fix following crash that occurs when the driver is processing rx packets
while the device is not initialized yet

$ rmmod mt7615e
[   67.210261] mt7615e 0000:01:00.0: Message -239 (seq 2) timeout
$ modprobe mt7615e
[   72.406937] bus=0x1, slot = 0x0, irq=0x16
[   72.436590] CPU 0 Unable to handle kernel paging request at virtual address 00000004, epc == 8eec4240, ra == 8eec41e0
[   72.450291] mt7615e 0000:01:00.0: Firmware is not ready for download
[   72.457724] Oops[#1]:
[   72.470494] mt7615e: probe of 0000:01:00.0 failed with error -5
[   72.474829] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.114 #0
[   72.498702] task: 805769e0 task.stack: 80564000
[   72.507709] $ 0   : 00000000 00000001 00000000 00000001
[   72.518106] $ 4   : 8f704dbc 00000000 00000000 8f7046c0
[   72.528500] $ 8   : 00000024 8045e98c 81210008 11000000
[   72.538895] $12   : 8fc09f60 00000008 00000019 00000033
[   72.549289] $16   : 8f704d80 e00000ff 8f0c7800 3c182406
[   72.559684] $20   : 00000006 8ee615a0 4e000108 00000000
[   72.570078] $24   : 0000004c 8000cf94
[   72.580474] $28   : 80564000 8fc09e38 00000001 8eec41e0
[   72.590869] Hi    : 00000001
[   72.596582] Lo    : 00000000
[   72.602319] epc   : 8eec4240 mt7615_mac_fill_rx+0xac/0x494 [mt7615e]
[   72.614953] ra    : 8eec41e0 mt7615_mac_fill_rx+0x4c/0x494 [mt7615e]
[   72.627580] Status: 11008403 KERNEL EXL IE
[   72.635899] Cause : 40800008 (ExcCode 02)
[   72.643860] BadVA : 00000004
[   72.649573] PrId  : 0001992f (MIPS 1004Kc)
[   72.657704] Modules linked in: mt7615e pppoe ppp_async pppox ppp_generic nf_conntrack_ipv6 mt76x2e mt76x2_common mt76x02_lib mt7603e mt76 mac80211 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_mu]
[   72.792717] Process swapper/0 (pid: 0, threadinfo=80564000, task=805769e0, tls=00000000)
[   72.808799] Stack : 8f0c7800 00000800 8f0c7800 8032b874 00000000 40000000 8f704d80 8ee615a0
[   72.825428]         8dc88010 00000001 8ee615e0 8eec09b0 8dc88010 8032b914 8f3aee80 80567d20
[   72.842055]         00000000 8ee615e0 40000000 8f0c7800 00000108 8eec9944 00000000 00000000
[   72.858682]         80508f10 80510000 00000001 80567d20 8ee615a0 00000000 00000000 8ee61c00
[   72.875308]         8ee61c40 00000040 80610000 80580000 00000000 8ee615dc 8ee61a68 00000001
[   72.891936]         ...
[   72.896793] Call Trace:
[   72.901649] [<8eec4240>] mt7615_mac_fill_rx+0xac/0x494 [mt7615e]
[   72.913602] [<8eec09b0>] mt7615_queue_rx_skb+0xe4/0x12c [mt7615e]
[   72.925734] [<8eec9944>] mt76_dma_cleanup+0x390/0x42c [mt76]
[   72.936988] Code: ae020018  8ea20004  24030001 <94420004> a602002a  8ea20004  90420000  14430003  a2020034
[   72.956390]
[   72.959676] ---[ end trace f176967739edb19f ]---

Fixes: 04b8e65922 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:27 +02:00
Lorenzo Bianconi
4a8c99c737 mt76: mt76x02: fix edcca file permission
Use 0600 as edcca file permission in mt76x02 debugfs

Fixes: 643749d4a8 ("mt76: mt76x02: disable ED/CCA by default")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:27 +02:00
Lorenzo Bianconi
984d885437 mt76: mt7603: add debugfs knob to enable/disable edcca
Introduce a knob in mt7603 debugfs in order to enable/disable
energy detection based on CCA thresholds

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:27 +02:00
Lorenzo Bianconi
8aac454dbb mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set
Run mt76x02_edcca_init atomically in mt76_edcca_set since it runs
concurrently with calibration work and mt76x2_set_channel.
Moreover perform phy calibration atomically

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:27 +02:00
Lorenzo Bianconi
6e4caaea99 mt76: mt76x2: move mutex_lock inside mt76x2_set_channel
This is a preliminary patch to run mt76x02_edcca_init atomically

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:27 +02:00
Lorenzo Bianconi
8424814342 mt76: mt76x2u: remove mt76x02_edcca_init in mt76x2u_set_channel
Remove mt76x02_edcca_init in mt76x2u_set_channel since it is already
run by mt76x2u_phy_channel_calibrate performing channel calibration

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:27 +02:00
Lorenzo Bianconi
a78f15471c mt76: mt76x02: remove enable from mt76x02_edcca_init signature
Remove enable parameter from mt76x02_edcca_init routine signature since
it is always true

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:27 +02:00
Lorenzo Bianconi
f9e5b885fa mt76: mt7615: add static qualifier to mt7615_rx_poll_complete
Make mt7615_rx_poll_complete static since it is used just in pci.c
to initialize rx_poll_complete function pointer

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:27 +02:00
Lorenzo Bianconi
132191a8b8 mt76: mt7615: rearrange cleanup operations in mt7615_unregister_device
Cleanup tx/rx napi before releasing pending idrs.
Moreover unmap txwi_cache running mt76_free_device routine

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:27 +02:00
Lorenzo Bianconi
c38cbba4ca mt76: mt7603: stop mac80211 queues before setting the channel
Suspend data transmission during channel switch

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:27 +02:00
Lorenzo Bianconi
b28248ec91 mt7615: mcu: run __mt76_mcu_send_msg in mt7615_mcu_send_firmware
Run __mt76_mcu_send_msg instead of __mt7615_mcu_msg_send and remove
duplicated code.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:26 +02:00
Lorenzo Bianconi
5d15f2ea16 mt7615: mcu: init mcu_restart function pointer
Use common function wrapper in mt7615_mcu_exit since the code is shared
with m7603 driver

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:26 +02:00
Lorenzo Bianconi
a3a2c2e79c mt7615: initialize mt76_mcu_ops data structure
Use __mt76_mcu_send_msg wrapper instead of mt7615_mcu_msg_send.
This is a preliminary patch for mt7615-mt7603 mcu code unification

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:26 +02:00
Lorenzo Bianconi
516c3e3805 mt7615: mcu: use standard signature for mt7615_mcu_msg_send
Use mt76 common signature for mt7615_mcu_msg_send. Move skb allocation
in mt7615_mcu_msg_send and remove duplicated code. Remove
__mt7615_mcu_set_wtbl and __mt7615_mcu_set_sta_rec since now are used
just to send mcu msgs.  This is a preliminary patch for mt7615-mt7603 mcu
code unification

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:26 +02:00
Lorenzo Bianconi
eb2024b087 mt7615: mcu: remove unused structure in mcu.h
Remove following struct no longer used:
- dev_info
- bss_info
- bss_info_tag_handler

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:26 +02:00
Lorenzo Bianconi
1ca8089a55 mt7615: mcu: do not use function pointers whenever possible
Remove function pointers in mt7615_mcu_set_bss_info and run function
directly. Moreover remove __mt7615_mcu_set_bss_info since it is run just
by mt7615_mcu_set_bss_info and remove duplicated istructions

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:26 +02:00
Lorenzo Bianconi
fddc827ffc mt7615: mcu: unify __mt7615_mcu_set_dev_info and mt7615_mcu_set_dev_info
Unify mt7615_mcu_set_dev_info and __mt7615_mcu_set_dev_info since the
latter is run just by mt7615_mcu_set_dev_info

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:26 +02:00
Lorenzo Bianconi
893369b769 mt7615: mcu: remove skb_ret from mt7615_mcu_msg_send
Remove skb_ret parameter from mt7615_mcu_msg_send signature since it is
actually used just by mt7615_mcu_patch_sem_ctrl. This is a prelimanry
patch to use mt76 common mcu API

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:26 +02:00
Lorenzo Bianconi
33d9ed728e mt7615: remove dest from mt7615_mcu_msg_send signature
Remove dest parameter from mt7615_mcu_msg_send/__mt7615_mcu_msg_send
routine signature since it can is always set to MCU_S2D_H2N

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:26 +02:00
Lorenzo Bianconi
27da3bfd31 mt7615: remove query from mt7615_mcu_msg_send signature
Remove query parameter from mt7615_mcu_msg_send routine signature since
it can be obtained from cmd value

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:26 +02:00
Lorenzo Bianconi
b1722925d2 mt7615: mcu: remove unused parameter in mt7615_mcu_del_wtbl
Remove unused vif parameter in mt7615_mcu_del_wtbl signature

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:26 +02:00
Lorenzo Bianconi
598a44344f mt7615: mcu: unify mt7615_mcu_add_wtbl_bmc and mt7615_mcu_del_wtbl_bmc
Remove duplicated code in mt7615_bss_info_changed

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:26 +02:00
Lorenzo Bianconi
d7228bcf7b mt7615: mcu: use proper msg size in mt7615_mcu_add_wtbl
Use proper mcu message size in mt7615_mcu_add_wtbl and do not
allocate a huge buffer. Moreover use stack memory instead of heap one

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:26 +02:00
Lorenzo Bianconi
77eaa281c2 mt7615: mcu: use proper msg size in mt7615_mcu_add_wtbl_bmc
Use proper mcu message size in mt7615_mcu_add_wtbl_bmc and do not
allocate a huge buffer. Moreover use stack memory instead of heap one

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:26 +02:00
Lorenzo Bianconi
b876457c6a mt7615: mcu: remove bss_info_convert_vif_type routine
Remove bss_info_convert_vif_type routine since it is run just in
mt7615_mcu_set_bss_info and the switch over vif->type is already there.
Simplify mt7615_mcu_set_bss_info routine

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:25 +02:00
Lorenzo Bianconi
0467448d2e mt7615: mcu: simplify __mt7615_mcu_set_sta_rec
Do not loop over cmd payload in __mt7615_mcu_set_sta_rec since it is
already done in before running __mt7615_mcu_set_sta_rec (e.g.
mt7615_mcu_set_sta_rec)

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:25 +02:00
Lorenzo Bianconi
8e309f7dc7 mt7615: mcu: simplify __mt7615_mcu_set_wtbl
Do not loop over cmd payload in __mt7615_mcu_set_wtbl since it is
already done in before running __mt7615_mcu_set_wtbl (e.g.
mt7615_mcu_set_wtbl_key)

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2019-06-25 12:55:25 +02:00