Querying EEPROM high pages data for SFP module is currently
not supported by our driver but is still tried, resulting in
invalid FW queries.
Set the EEPROM ethtool data length to 256 for SFP module to
limit the reading for page 0 only and prevent invalid FW queries.
Fixes: 7202da8b7f ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support")
Signed-off-by: Erez Alfasi <ereza@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
It turns out that the log can consume nearly all the space in an AG, and
when this happens this it's possible that there will be less free space
in the AG than the reservation would try to hide. On a debug kernel
this can trigger an ASSERT in xfs/250:
XFS: Assertion failed: xfs_perag_resv(pag, XFS_AG_RESV_METADATA)->ar_reserved + xfs_perag_resv(pag, XFS_AG_RESV_RMAPBT)->ar_reserved <= pag->pagf_freeblks + pag->pagf_flcount, file: fs/xfs/libxfs/xfs_ag_resv.c, line: 319
The log is permanently allocated, so we know we're never going to have
to expand the btrees to hold any records associated with the log space.
We therefore can treat the space as if it doesn't exist.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
PSP fw primary buffer is not used under SRIOV.
Under SRIOV, VBIOS or hypervisor driver will load psp
sos and psp sysdrv. Therefore, we don't need to
allocate memory for it.
v2: remove superfluous check for amdgpu_bo_free_kernel().
Signed-off-by: Yintian Tao <yttao@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
There is a typo so the code unlocks twice instead of taking the lock and
then releasing it.
Fixes: f14a323db5 ("drm/amd/powerplay: implement update enabled feature state to smc for smu11")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For SR-IOV, vram_width can't be read from ATOM as
RAVEN, and DF related registers is not readable, so hardcord
is the only way to set the correct vram_width.
Reviewed-by: Yintian Tao <yttao@amd.com>
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Signed-off-by: Yintian Tao <yttao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I2SE has been acquired, so i decided to use my private address now.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Not necessary on soc15 and breaks driver reload on server cards.
Acked-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Error message printed:
modprobe: ERROR: could not insert 'tipc': Address family not
supported by protocol.
when modprobe tipc after the following patch: switch order of
device registration, commit 7e27e8d613
("tipc: switch order of device registration to fix a crash")
Because sock_create_kern(net, AF_TIPC, ...) called by
tipc_topsrv_create_listener() in the initialization process
of tipc_init_net(), so tipc_socket_init() must be execute before that.
Meanwhile, tipc_net_id need to be initialized when sock_create()
called, and tipc_socket_init() is no need to be called for each namespace.
I add a variable tipc_topsrv_net_ops, and split the
register_pernet_subsys() of tipc into two parts, and split
tipc_socket_init() with initialization of pernet params.
By the way, I fixed resources rollback error when tipc_bcast_init()
failed in tipc_init_net().
Fixes: 7e27e8d613 ("tipc: switch order of device registration to fix a crash")
Signed-off-by: Junwei Hu <hujunwei4@huawei.com>
Reported-by: Wang Wang <wangwang2@huawei.com>
Reported-by: syzbot+1e8114b61079bfe9cbc5@syzkaller.appspotmail.com
Reviewed-by: Kang Zhou <zhoukang7@huawei.com>
Reviewed-by: Suanming Mou <mousuanming@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We can oops in nf_tables_fill_rule_info().
Its not possible to fetch previous element in rcu-protected lists
when deletions are not prevented somehow: list_del_rcu poisons
the ->prev pointer value.
Before rcu-conversion this was safe as dump operations did hold
nfnetlink mutex.
Pass previous rule as argument, obtained by keeping a pointer to
the previous rule during traversal.
Fixes: d9adf22a29 ("netfilter: nf_tables: use call_rcu in netlink dumps")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This was added to amdgpu but was missed in amdkfd
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.rg
[WHY]
Some early Raven boards had a bad SBIOS that doesn't play nicely with
the DMCU FW. We thought the issues were fixed by ignoring errors on DMCU
load but that doesn't seem to be the case. We've still seen reports of
users unable to boot their systems at all.
[HOW]
Disable DMCU load on Raven 1. Only load it for Raven 2 and Picasso.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
[WHY]
We only want to load DMCU FW on Picasso and Raven 2, not on Raven 1.
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
As of today if userspace process tries to access a kernel virtual addres
(0x7000_0000 to 0x7ffff_ffff) such that a legit kernel mapping already
exists, that process hangs instead of being killed with SIGSEGV
Fix that by ensuring that do_page_fault() handles kenrel vaddr only if
in kernel mode.
And given this, we can also simplify the code a bit. Now a vmalloc fault
implies kernel mode so its failure (for some reason) can reuse the
@no_context label and we can remove @bad_area_nosemaphore.
Reproduce user test for original problem:
------------------------>8-----------------
#include <stdlib.h>
#include <stdint.h>
int main(int argc, char *argv[])
{
volatile uint32_t temp;
temp = *(uint32_t *)(0x70000000);
}
------------------------>8-----------------
Cc: <stable@vger.kernel.org>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
| arch/arc/mm/tlb.c:914:2: warning: variable length array 'pd0' is used [-Wvla]
| arch/arc/include/asm/cmpxchg.h:95:29: warning: value computed is not used [-Wunused-value]
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Amlogic's vendor kernel defines an OPP for the GPU on Meson8b boards
with a voltage of 1.15V. It turns out that the vendor kernel relies on
the bootloader to set up the voltage. The bootloader however sets a
fixed voltage of 1.10V.
Amlogic's patched u-boot sources (uboot-2015-01-15-23a3562521) confirm
this:
$ grep -oiE "VDD(EE|AO)_VOLTAGE[ ]+[0-9]+" board/amlogic/configs/m8b_*
board/amlogic/configs/m8b_m100_v1.h:VDDAO_VOLTAGE 1100
board/amlogic/configs/m8b_m101_v1.h:VDDAO_VOLTAGE 1100
board/amlogic/configs/m8b_m102_v1.h:VDDAO_VOLTAGE 1100
board/amlogic/configs/m8b_m200_v1.h:VDDAO_VOLTAGE 1100
board/amlogic/configs/m8b_m201_v1.h:VDDEE_VOLTAGE 1100
board/amlogic/configs/m8b_m201_v1.h:VDDEE_VOLTAGE 1100
board/amlogic/configs/m8b_m202_v1.h:VDDEE_VOLTAGE 1100
Another hint at this is the VDDEE voltage on the EC-100 and Odroid-C1
boards. The VDDEE regulator supplies the Mali GPU. It's basically a copy
of the VCCK (CPU supply) which means it's limited to 0.86V to 1.14V.
Update the operating voltage of the Mali GPU on Meson8b to 1.10V so it
matches with what the vendor u-boot sets.
Fixes: c3ea80b613 ("ARM: dts: meson8b: add the Mali-450 MP2 GPU")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Drop the undocumented "switch-delay" which is a left-over from my
experiments with an early lima kernel driver when it was still
out-of-tree and required this property on Amlogic SoCs.
Fixes: c3ea80b613 ("ARM: dts: meson8b: add the Mali-450 MP2 GPU")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The interrupts in Amlogic's vendor kernel sources are all contiguous.
There are two typos leading to pp2 and pp4 as well as ppmmu2 and ppmmu4
incorrectly sharing the same interrupt line.
Fix this by using interrupt 170 for pp2 and 171 for ppmmu2.
Also drop the undocumented "switch-delay" which is a left-over from my
experiments with an early lima kernel driver when it was still
out-of-tree and required this property on Amlogic SoCs.
Fixes: 7d3f6b536e ("ARM: dts: meson8: add the Mali-450 MP6 GPU")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEE8rQSAMVO+zA4DBdWxWXV+ddtWDsFAlzi2E8ACgkQxWXV+ddt
WDuwdg/9Gil8uC28r7HLk1DkMdUZp6qHPXC2D79iN63XOIyxtTv2Y/ZDOneHheTa
NaW9DOe6PUWoVyrYRCM/BhRxouZp0cFlpMG1m8ABdaO3uSCzwlc9wHs7YPNOwiGJ
DM3qikX4V8w0ECoY3Z9NzbHLGTi9INzgkuazWGQnplK1ZA7CHe4RLH1r442daTAO
iFr+bhjODmwHyebXlK66dcOGw7HXp4ac+iyZnlivNcTipGtOTdA7kryZLaNmfepz
JfMESxGMrLhdrd/YxeaDEVYRAh1ZSD57/WGrQDeRQ54qD2ELXmoPX0rAtquwoziS
F1PSitiW0DzYGjS+KCKP9553tlEtJ5Md45k0AibK4h/aqCPy6s6khK/PfsHQT5K+
lD0CqwB4zr9zOhS0n1uFRlNomzK4UZ2SPDtB4KMpCCEQLlvwJIkUqb3Bx6JZgAEH
FPFEZGVX/Xyqv6w/VASHHhhoAGRJ/mIx+mU/RGVU+jFVBzwd0EmlCymFDMF2z44K
8HZz7ib4fMvArR5S2uEz/h85JM7EzDG7YkPluzERiQy86Abi79QQl8qWfC7yBGYd
K3g6VQM/H6NUprXqTNQ/NU7Zvrq5HPXC+NhrLvC+Ul0DlwLAwxRj8NeYImUuDDpi
Du49hJcV0U2kWocvwdP+600y48UroioJHlqKtqlng3NKxdjUGxw=
=qN6T
-----END PGP SIGNATURE-----
Merge tag 'for-5.2-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Notable highlights:
- fixes for some long-standing bugs in fsync that were quite hard to
catch but now finaly fixed
- some fixups to error handling paths that did not properly clean up
(locking, memory)
- fix to space reservation for inheriting properties"
* tag 'for-5.2-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Btrfs: tree-checker: detect file extent items with overlapping ranges
Btrfs: fix race between ranged fsync and writeback of adjacent ranges
Btrfs: avoid fallback to transaction commit during fsync of files with holes
btrfs: extent-tree: Fix a bug that btrfs is unable to add pinned bytes
btrfs: sysfs: don't leak memory when failing add fsid
btrfs: sysfs: Fix error path kobject memory leak
Btrfs: do not abort transaction at btrfs_update_root() after failure to COW path
btrfs: use the existing reserved items for our first prop for inheritance
btrfs: don't double unlock on error in btrfs_punch_hole
btrfs: Check the compression level before getting a workspace
The call to of_get_next_child returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./arch/arm/mach-bcm/board_bcm281xx.c:43:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 35, but without a corresponding object release within this function.
./arch/arm/mach-bcm/platsmp-brcmstb.c:337:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 329, but without a corresponding object release within this function.
./arch/arm/mach-bcm/platsmp-brcmstb.c:341:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 329, but without a corresponding object release within this functio
./arch/arm/mach-bcm/bcm63xx_smp.c:150:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 130, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: bcm-kernel-feedback-list@broadcom.com
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Gregory Fong <gregory.0xf0@gmail.com>
Acked-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Introduce code to handle DPFE API v3. We also change the driver to
default to v3 by default and use API v2 only for select chips.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Prepare the driver so that sysfs attributes can differ based on the API
version.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Extend the driver, so it can handle different API versions for
interacting with the DCPU. This is in preparation for the upcoming API
v3.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We wait for the DCPU to be ready before sending a command.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Print an error message if the DCPU firmware couldn't be downloaded.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Remove an unused struct and fix source code formatting in a few areas.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
pointers are being hashed when printed. Displaying the virtual memory at
bootup time is not helpful, especially given we use a dev_info() which
already displays the platform device's address.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
For dual-rank LPDDR4, result data for any command is placed in byte 0
and byte 3 of the corresponding MR register by the firmware.
Single-rank RAM was supposed to work the same way. However, due to a
firmware bug, result values are only placed in byte 3 of the
corresponding MR register.
Since byte 3 works for single-rank and dual-rank setups, we change the
Linux driver to always use byte 3, thus returning the correct value in
either case.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
We can pass a (struct priv_data *) to generic_show() rather than a
(struct device *). For two of the three callers of this function, the
change means one less call to dev_get_drvdata(). For the third caller,
it makes no difference.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
To be more "scheduler friendly", we use msleep() rather than udelay()
while we wait for the DCPU to respond.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Add DT nodes for
- Two xHCI host controllers
- Two BDC Broadcom USB device controller
- Five USB PHY controllers
[xHCI0] [BDC0] [xHCI1] [BDC1]
| | | |
--------------- -----------------------
| | | | |
[SS-PHY0] [HS-PHY0] [SS-PHY1] [HS-PHY2] [HS-PHY1]
[SS-PHY0/HS-PHY0] and [SS-PHY1/HS-PHY1] are combo PHYs has one SS and
one HS PHYs. [HS-PHY2] is a single HS PHY.
xHCI use SS-PHY to detect SS devices and HS-PHY to detect HS/FS/LS
devices. BDC use SS-PHY in SS mode and HS-PHY in HS mode.
xHCI0 port1 is SS-PHY0, port2 is HS-PHY0.
xHCI1 port1 is SS-PHY1, port2 is HS-PHY2 and port3 is HS-PHY1.
Signed-off-by: Srinath Mannam <srinath.mannam@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
During the removal of the skeleton.dtsi file with commit abe60a3a7a
("ARM: dts: Kill off skeleton{64}.dtsi") a number of Broadcom SoCs were
converted, but a few were left unoticed, now causing boot failures with
v5.1 since the kernel cannot find suitable memory.
Updating the .dtsi files with the property will be done next, since
there are some memory nodes that do not follow the proper naming
convention and lack an unit name.
Fixes: abe60a3a7a ("ARM: dts: Kill off skeleton{64}.dtsi")
Reported-by: Kevin Hilman <khilman@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The BIUCTRL register writes require that a data barrier be inserted
after comitting the write to the register for the block to latch in the
recently written values. Reads have no such requirement and are not
changed.
Fixes: 34642650e5 ("soc: Move brcmstb to bcm/brcmstb")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In case setup_hifcpubiuctrl_regs() returns an error, because of e.g:
an unsupported CPU type, just catch that error and return instead of
blindly continuing with the initialization. This fixes a NULL pointer
de-reference with the code continuing without having a proper array of
registers to use.
Fixes: 22f7a9116e ("soc: brcmstb: Correct CPU_CREDIT_REG offset for Brahma-B53 CPUs")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
In commit b7404c7ecb ("drm/i915: Bump ready tasks ahead of
busywaits"), I tried cutting a corner in order to not install a signal
for each of our dependencies, and only listened to requests on which we
were intending to busywait. The compromise that was made was that
instead of then being able to promote the request with a full
NOSEMAPHORE like its non-busywaiting brethren, as we had not ensured we
had cleared the semaphore chain, we settled for only using the NEWCLIENT
boost. With an over saturated system with multiple NEWCLIENTS in flight
at any time, this was found to be an inadequate promotion and left us
with a much poorer scheduling order than prior to using semaphores.
The outcome of this patch, is that all requests have NOSEMAPHORE
priority when they have no dependencies and are ready to run and not
busywait, restoring the pre-semaphore ordering on saturated systems.
We can demonstrate the effect of poor scheduling order by oversaturating
the system using gem_wsim on a system with multiple vcs engines
(i.e running the same workloads across more clients than required for
peak throughput, e.g. media_load_balance_17i7.wsim -c4 -b context):
x v5.1 (normalized)
+ tip
* fix
+------------------------------------------------------------------------+
| x |
| x |
| x |
| x |
| %x |
| %%x |
| %%x |
| %%x |
| %%x |
| %%x |
| %%x |
| %%x |
| %%x |
| %%x |
| %%x |
| %#x |
| %#x |
| %#x |
| %#x |
| %#x |
| + %#xx |
| + %#xx |
| + %%#xx |
| + %%#xx |
| + %%#xx |
| + %%#xx |
| + %%##x |
| +++ %%##x |
| +++ %%##x |
| +++ %%##x |
| ++++ %%##x |
| ++++ %%##x |
| ++++ %%##xx |
| ++++ %###xx |
| ++++ %###xx |
| ++++ %###xx |
| ++++ %###xx |
| ++++ + %#O#xx |
| ++++ + %#O#xx |
| ++++++ + %#O#xx |
| ++++++++++ %OOOxxx|
| ++++++++++ + %#OOO#xx|
| + ++++++++++++ ++ +++++ + ++ @@OOOO#xx|
| |A_| |
||__________M_______A____________________| |
| |A_| |
+------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 120 0.99456 1.00628 0.999985 1.0001545 0.0024387139
+ 120 0.873021 1.00037 0.884134 0.90148752 0.039190862
Difference at 99.5% confidence
-0.098667 +/- 0.0110762
-9.86517% +/- 1.10745%
(Student's t, pooled s = 0.0277657)
% 120 0.990207 1.00165 0.9970265 0.99699748 0.0021024
Difference at 99.5% confidence
-0.003157 +/- 0.000908245
-0.315651% +/- 0.0908105%
(Student's t, pooled s = 0.00227678)
Fixes: b7404c7ecb ("drm/i915: Bump ready tasks ahead of busywaits")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-2-chris@chris-wilson.co.uk
(cherry picked from commit 17db337f50)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
usb4_tm is unsed on dra71 and accessing the module
with ti,sysc is causing a boot crash hence disable its target
module.
Fixes: 549fce068a ("ARM: dts: dra7: Add l4 interconnect hierarchy and ti-sysc data")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Commit 1413b2bc07 ("drm/i915: Trim NEWCLIENT boosting") had the
intended consequence of not allowing a sequence of work that merely
crossed into a new engine the privilege to be promoted to NEWCLIENT
status. It also had the unintended consequence of actually making
NEWCLIENT effective on heavily oversubscribed transcode machines and
impacting upon their throughput.
If we consider a client packet composed of (rcsA, rcsB, vcs) and 30 of
those clients, using the NEWCLIENT boost that will be scheduled as
rcsA x 30, (rcsB, vcs) x 30
where as before it would have been
(rcsA, rcsB, vcs) x 30
That is with NEWCLIENT only boosting the first request of each client,
we would execute all rcsA requests prior to running on the vcs engines;
acruing a lot of dead time as compared to the previous case where the
vcs engine would be started in parallel to processing the second client.
The previous patch has the effect of delaying submission until it is
required by a third party (either the user with an explicit wait, or by
another client/engine). We reduce the NEWCLIENT bump to a mere WAIT,
which has the effect of removing its preemptive grant and reducing it to
the same level as any other user interaction -- that it will not be
promoted above the interengine dependencies, and so preventing NEWCLIENTS
from starving other engines. This a large nerf to the rrul properties of
the current NEWCLIENT, but it still does give prioritised submission to
new requests from light workloads.
References: b16c765122 ("drm/i915: Priority boost for new clients")
Fixes: 1413b2bc07 ("drm/i915: Trim NEWCLIENT boosting") # customer impact
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Dmitry Rogozhkin <dmitry.v.rogozhkin@intel.com>
Cc: Dmitry Ermilov <dmitry.ermilov@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-4-chris@chris-wilson.co.uk
(cherry picked from commit 68fc728b01)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Introduce dra71x.dtsi to include dra71x specific changes.
rtc is fused out on dra71 and accessing target module
register is causing a boot crash hence disable it.
Fixes: 549fce068a ("ARM: dts: dra7: Add l4 interconnect hierarchy and ti-sysc data")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The handling of the no-preemption priority level imposes the restriction
that we need to maintain the implied ordering even though preemption is
disabled. Otherwise we may end up with an AB-BA deadlock across multiple
engine due to a real preemption event reordering the no-preemption
WAITs. To resolve this issue we currently promote all requests to WAIT
on unsubmission, however this interferes with the timeslicing
requirement that we do not apply any implicit promotion that will defeat
the round-robin timeslice list. (If we automatically promote the active
request it will go back to the head of the queue and not the tail!)
So we need implicit promotion to prevent reordering around semaphores
where we are not allowed to preempt, and we must avoid implicit
promotion on unsubmission. So instead of at unsubmit, if we apply that
implicit promotion on adding the dependency, we avoid the semaphore
deadlock and we also reduce the gains made by the promotion for user
space waiting. Furthermore, by keeping the earlier dependencies at a
higher level, we reduce the search space for timeslicing without
altering runtime scheduling too badly (no dependencies at all will be
assigned a higher priority for rrul).
v2: Limit the bump to external edges (as originally intended) i.e.
between contexts and out to the user.
Testcase: igt/gem_concurrent_blit
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190515130052.4475-3-chris@chris-wilson.co.uk
(cherry picked from commit 6e7eb7a807)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
usb4_tm is unsed on dra76 and accessing the module
with ti,sysc is causing a boot crash hence disable its target
module.
Fixes: 549fce068a ("ARM: dts: dra7: Add l4 interconnect hierarchy and ti-sysc data")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
To simplify the next patch, update bump_priority and schedule to accept
the internal i915_sched_ndoe directly and not expect a request pointer.
add/remove: 0/0 grow/shrink: 2/1 up/down: 8/-15 (-7)
Function old new delta
i915_schedule_bump_priority 109 113 +4
i915_schedule 50 54 +4
__i915_schedule 922 907 -15
v2: Adopt node for the old rq local, since it no longer is a request but
the origin node.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190513120102.29660-2-chris@chris-wilson.co.uk
(cherry picked from commit 52c76fb18a)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
To avoid pulling in a forward declaration in the next patch, move the
i915_sched_node handling to after the main dfs of the scheduler.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190513120102.29660-1-chris@chris-wilson.co.uk
(cherry picked from commit 5ae87063c1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
rtc is fused out on dra76 and accessing target module
register is causing a boot crash hence disable it.
Fixes: 549fce068a ("ARM: dts: dra7: Add l4 interconnect hierarchy and ti-sysc data")
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Pull networking fixes from David Miller:1) Use after free in __dev_map_entry_free(), from Eric Dumazet.
1) Use after free in __dev_map_entry_free(), from Eric Dumazet.
2) Fix TCP retransmission timestamps on passive Fast Open, from Yuchung
Cheng.
3) Orphan NFC, we'll take the patches directly into my tree. From
Johannes Berg.
4) We can't recycle cloned TCP skbs, from Eric Dumazet.
5) Some flow dissector bpf test fixes, from Stanislav Fomichev.
6) Fix RCU marking and warnings in rhashtable, from Herbert Xu.
7) Fix some potential fib6 leaks, from Eric Dumazet.
8) Fix a _decode_session4 uninitialized memory read bug fix that got
lost in a merge. From Florian Westphal.
9) Fix ipv6 source address routing wrt. exception route entries, from
Wei Wang.
10) The netdev_xmit_more() conversion was not done %100 properly in mlx5
driver, fix from Tariq Toukan.
11) Clean up botched merge on netfilter kselftest, from Florian
Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (74 commits)
of_net: fix of_get_mac_address retval if compiled without CONFIG_OF
net: fix kernel-doc warnings for socket.c
net: Treat sock->sk_drops as an unsigned int when printing
kselftests: netfilter: fix leftover net/net-next merge conflict
mlxsw: core: Prevent reading unsupported slave address from SFP EEPROM
mlxsw: core: Prevent QSFP module initialization for old hardware
vsock/virtio: Initialize core virtio vsock before registering the driver
net/mlx5e: Fix possible modify header actions memory leak
net/mlx5e: Fix no rewrite fields with the same match
net/mlx5e: Additional check for flow destination comparison
net/mlx5e: Add missing ethtool driver info for representors
net/mlx5e: Fix number of vports for ingress ACL configuration
net/mlx5e: Fix ethtool rxfh commands when CONFIG_MLX5_EN_RXNFC is disabled
net/mlx5e: Fix wrong xmit_more application
net/mlx5: Fix peer pf disable hca command
net/mlx5: E-Switch, Correct type to u16 for vport_num and int for vport_index
net/mlx5: Add meaningful return codes to status_to_err function
net/mlx5: Imply MLXFW in mlx5_core
Revert "tipc: fix modprobe tipc failed after switch order of device registration"
vsock/virtio: free packets during the socket release
...
With gtt remapping in place we can use arbitrarily large
framebuffers. Let's bump the limits to 16kx16k on gen7+.
The limit was chosen to match the maximum 2D surface size
of the 3D engine.
With the remapping we could easily go higher than that for the
display engine. However the modesetting ddx will blindly assume
it can handle whatever is reported via kms. The oversized
buffer dimensions are not caught by glamor nor Mesa until
finally an assert will trip when genxml attempts to pack the
SURFACE_STATE. So we pick a safe limit to avoid the X server
from crashing (or potentially misbehaving if the genxml asserts
are compiled out).
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110187
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-9-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
With gtt remapping plugged in we can simply raise the stride
limit on gen4+. Let's just pick the limit to match the render
engine max stride (256KiB on gen7+, 128KiB on gen4+).
No remapping CCS because the virtual address of each page actually
matters due to the new hash mode
(WaCompressedResourceDisplayNewHashMode:skl,kbl etc.), and no
remapping on gen2/3 due extra complications from fence alignment
and gen2 2KiB GTT tile size. Also no real benefit since the
display engine limits already match the other limits.
v2: Rebase due to is_ccs_modifier()
v3: Tweak the comment and commit msg
v4: Fix gen4+ stride limit to be 128KiB
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> #v3
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-8-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>