Align dumb buffer stride to 4k if the fb will be big enough to
require gtt remapping.
v2: Leave the stride alone for buffers that look to be for the cursor
v3: Make it not a hack (Daniel)
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-7-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
The display engine stride limits are getting in our way. On SKL+
we are limited to 8k pixels, which is easily exceeded with three
4k displays. To overcome this limitation we can remap the pages
in the GTT to provide the display engine with a view of memory
with a smaller stride.
The code is mostly already there as We already play tricks with
the plane surface address and x/y offsets.
A few caveats apply:
* linear buffers need the fb stride to be page aligned, as
otherwise the remapped lines wouldn't start at the same
spot
* compressed buffers can't be remapped due to the new
ccs hash mode causing the virtual address of the pages
to affect the interpretation of the compressed data. IIRC
the old hash was limited to the low 12 bits so if we were
using that mode we could remap. As it stands we just refuse
to remapp with compressed fbs.
* no remapping gen2/3 as we'd need a fence for the remapped
vma, which we currently don't have. Need to deal with the
fence POT requirements, and do something about the gen2
gtt page size vs tile size difference
v2: Rebase due to is_ccs_modifier()
Fix up the skl+ stride_mult mess
memset() the gtt_view because otherwise we could leave
junk in plane[1] when going from 2 plane to 1 plane format
v3: intel_check_plane_stride() was split out
v4: Drop the aligned viewport stuff, it was meant for ccs which
can't be remapped anyway
v5: Introduce intel_plane_can_remap()
Reorder the code so that plane_state->view gets filled
even for invisible planes, otherwise we'd keep using
stale values and could explode during remapping. The new
logic never remaps invisible planes since we don't have
a viewport, and instead pins the full fb instead
v6: Fix plane src coord checks after remapping by moving
plane_state->base.src to the final plane x/y offsets.
Allow intel_plane_check_stride() to fail even with
remapping (can happen at least with a linear 64bpp
fb with a 4k plane and a suitably inconvenient src
coordinates).
Improve aux plane FIXME (Daniel)
Move some code shuffling into a separate patch (Daniel)
Testcase: igt/kms_big_fb
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-6-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reorganize some fb stride checking code a bit to prepare for
gtt remapping. And do a bit of s/pitch/stride/ renaming in the
process for a bit more uniformity (apart from the whole
fb->pitches[] thing).
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-5-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Add a live selftest to excercise rotated/remapped vmas. We simply
write through the rotated/remapped vma, and confirm that the data
appears in the right page when read through the normal vma.
Not sure what the fallout of making all rotated/remapped vmas
mappable/fenceable would be, hence I just hacked it in the test.
v2: Grab rpm reference (Chris)
GEM_BUG_ON(view.type not as expected) (Chris)
Allow CAN_FENCE for rotated/remapped vmas (Chris)
Update intel_plane_uses_fence() to ask for a fence
only for normal vmas on gen4+
v3: Deal with intel_wakeref_t
v4: Rebase
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-4-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Extend the rotated vma mock selftest to cover remapped vmas as
well.
TODO: reindent the loops I guess? Left like this for now to
ease review
v2: Include the vma type in the error message (Chris)
v3: Deal with trimmed sg
v4: Drop leftover debugs
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
To overcome display engine stride limits we'll want to remap the
pages in the GTT. To that end we need a new gtt_view type which
is just like the "rotated" type except not rotated.
v2: Use intel_remapped_plane_info base type
s/unused/unused_mbz/ (Chris)
Separate BUILD_BUG_ON()s (Chris)
Use I915_GTT_PAGE_SIZE (Chris)
v3: Use i915_gem_object_get_dma_address() (Chris)
Trim the sg (Tvrtko)
v4: Actually trim this time. Limit the max length
to one row of pages to keep things simple
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509122159.24376-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
If you want to see if your linker supports a certain flag, then ask the
linker directly with ld-option (not the compiler with cc-ldoption).
Checking for linker flag support is an antipattern that complicates the
usage of various linkers other than bfd via -fuse-ld={bfd|gold|lld}.
Cc: clang-built-linux@googlegroups.com
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
patches so we can merge them into -fixes.
Signed-off-by: Sean Paul <seanpaul@chromium.org>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlziwSIACgkQlvcN/ahK
BwrfMgf/egFs+Z6oNAlKgadIiy+qd8Yp4DrQHYssdV2ToxCBDiOpTrxeC92gFcqD
TNVUpLRg0XoDcVm81HriOMfmK9uUsOreFY2WoER1hKgeiv1QNpO8AO6rzF4aykY6
nn8PP0N4QS3En/bwqxDr8S9mnXzxkBjYk6j/Kn7kEXfsH2nI9RxIl9zBhLirsYBq
GOj01tsdbTPZBaDg0p0A0ZUzlqoyZInMPkri+pCiAgF2w6mo1n3Z/y45uGpboMFn
daGJjdZCoRtHaBo5naqLQ4Osx075oqZaguGaAT+BNb3QaulBDeKCA0Bu201iqWwD
INBD+Bh/6Q9MdV8vzc3VLwLJFlDj0A==
=ZyUW
-----END PGP SIGNATURE-----
Merge drm-misc-next-fixes-2019-05-20 into drm-misc-fixes
Picking up 3 sun4i patches that missed the last drm-misc-next-fixes pull
request for 5.2
Signed-off-by: Sean Paul <seanpaul@chromium.org>
This reverts commit 20bd1d026a.
This patch introduced regressions for devices that come online in
read-only state and subsequently switch to read-write.
Given how the partition code is currently implemented it is not
possible to persist the read-only flag across a device revalidate
call. This may need to get addressed in the future since it is common
for user applications to proactively call BLKRRPART.
Reverting this commit will re-introduce a regression where a
device-initiated revalidate event will cause the admin state to be
forgotten. A separate patch will address this issue.
Fixes: 20bd1d026a ("scsi: sd: Keep disk read-only when re-reading partition")
Cc: <stable@vger.kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently an int is being shifted and the result is being cast to a u64
which leads to undefined behaviour if the shift is more than 31 bits. Fix
this by casting the integer value 1 to u64 before the shift operation.
Addresses-Coverity: ("Bad shift operation")
Fixes: 7b59476912 ("[SCSI] bnx2fc: Handle REC_TOV error code from firmware")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a HARDWARE_ERROR is triggered for ASC=0x3e, the existing code is only
considering the case where ASCQ=0x1.
According to the http://www.t10.org/lists/asc-num.htm#ASC_3E specification,
other values may occur like a timeout (ASCQ=0x2).
This patch prints an error message when a non-handled message is received.
This can help diagnose a possible misbehavior of the controller or a
missing implementation in the Linux kernel.
This patch keeps the exact same error handling but prints a message if an
ASCQ != 1 is reported.
[mkp: clarified commit message]
Signed-off-by: Erwan Velu <e.velu@criteo.com>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
drivers/scsi/myrs.c: In function 'myrs_log_event':
drivers/scsi/myrs.c:821:24: warning: 'sshdr.sense_key' may be used uninitialized in this function [-Wmaybe-uninitialized]
struct scsi_sense_hdr sshdr;
If ev->ev_code is not 0x1C, sshdr.sense_key may be used uninitialized. Fix
this by initializing variable 'sshdr' to 0.
Fixes: 7726618639 ("scsi: myrs: Add Mylex RAID controller (SCSI interface)")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The call to of_get_next_child returns a node pointer with refcount
incremented thus it must be explicitly decremented after the last
usage.
Detected by coccinelle with the following warnings:
./arch/arm/mach-versatile/versatile_dt.c:315:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 302, but without a corresponding object release within this function.
./arch/arm/mach-versatile/versatile_dt.c:320:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 302, but without a corresponding object release within this function.
Signed-off-by: Wen Yang <wen.yang99@zte.com.cn>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When configuring a codec to be both bit-clock and frame-master, it was
found that the codec was always configured as bit-clock and frame-slave.
Looking at the simple_dai_link_of() function there appears to be two
problems with the configuration of the DAI format, which are ...
1. The function asoc_simple_parse_daifmt() is called before the function
asoc_simple_parse_codec() and this means that the device-tree node
for the codec has not been parsed yet, which is needed by the
function asoc_simple_parse_daifmt() to determine who is the codec.
2. The phandle passed to asoc_simple_parse_daifmt() is the phandle to
the 'codec' node and not the phandle of the actual codec defined by
the 'sound-dai' property under the 'codec' node.
Fix the above by moving the call to asoc_simple_parse_daifmt() after the
the call to asoc_simple_parse_codec() and pass the phandle for the codec
to asoc_simple_parse_daifmt().
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
With the recent changes to the driver and addition of OLPC XO-1.75 EC
driver it is possible to use this driver on ARM-based XO laptops as
well.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
All OLPC ECs are able to turn the power to the DCON on an off. Use the
regulator framework to expose the functionality.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
It's based off the driver from the OLPC kernel sources. Somewhat
modernized and cleaned up, for better or worse.
Modified to plug into the olpc-ec driver infrastructure (so that battery
interface and debugfs could be reused) and the SPI slave framework.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Just a cosmetic tidy-up.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Just return EPROBE_DEFER, so that whoever attempted to use the EC call can
defer their work.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Move the olpc-ec driver away from the X86 OLPC platform so that it could be
used by the ARM based laptops too. Notably, the driver for the OLPC battery,
which is also used on the ARM models, builds on this driver's interface.
It is actually plaform independent: the OLPC EC commands with their argument
and responses are mostly the same despite the delivery mechanism is
different.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Also, the header is x86 specific, while there are non-x86 OLPC machines.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The OLPC XO-1.75 Embedded Controller is a SPI master that uses extra
signals for handshaking. It needs to know when is the slave (Linux)
side's TX FIFO ready for transfer (the ready-gpio signal on the SPI
controller node) and when does it wish to respond with a command (the
cmd-gpio property).
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Pavel Machek <pavel@ucw.cz>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Prepare to use devices on the external SPI interface
on a DH electronics Development Board.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are several Beckhoff Automation industrial PC boards which use
pmc_plt_clk* clocks for ethernet controllers. This adds affected boards
to critclk_systems DMI table so the clocks are marked as CLK_CRITICAL and
not turned off.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Signed-off-by: Steffen Dirkwinkel <s.dirkwinkel@beckhoff.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The Lex 3I380D industrial PC has 4 ethernet controllers on board
which need pmc_plt_clk0 - 3 to function, add it to the critclk_systems
DMI table, so that drivers/clk/x86/clk-pmc-atom.c will mark the clocks
as CLK_CRITICAL and they will not get turned off.
Fixes: 648e921888 ("clk: x86: Stop marking clocks as CLK_IS_CRITICAL")
Reported-and-tested-by: Semyon Verchenko <semverchenko@factor-ts.ru>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
With OF being the only configuration possibility left, depend on it to
simplify some code.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Those definitions are only used within the driver meanwhile, so put them
there.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
There are no in-kernel users anymore, so remove this outdated interface.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Tested-by: Steve Twiss <stwiss.opensource@diasemi.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
soc_probe_component() has WARN() under if (component->driver->probe),
but, this WARN() check is not related to .probe callback.
So, it should be called at (B) instead of (A).
This patch moves it out of if().
if (component->driver->probe) {
ret = component->driver->probe(component);
...
(A) WARN(...)
}
(B) WARN(...)
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_driver :: pcm_new has snd_soc_dai as parameter, but
snd_soc_component_driver :: pcm_new doesn't have it.
rsnd driver needs snd_soc_dai at pcm_new.
This patch moves .pcm_new from snd_soc_component_driver to
snd_soc_dai_driver, and don't use rtd->cpu_dai anymore.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
IIR fileter can remove DC offset. It must be enabled when
dmic or amic connected to pmic is used.
Signed-off-by: Shunli Wang <shunli.wang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
include/linux/fs.h defines a bunch of simple fs helpers, (e.g.
simple_rename) and we intend to add an fs helper named simple_remove.
Rename the ASoC driver static functions, so they will not collide with
the upcoming fs helper function name.
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
The selection order of m/c in match table is corrected
to use common codec as last in the list.
Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a case when a we want to read a large number of bytes that
require a burst but is not a multiple of the word size (8). When this
happens rt5677_spi_reverse will run off the end of the buffer. The
solution is to tell spi_reverse the actual size of the destination and
stop if we reach it even if we have data left that we read.
Cc: Ben Zhang <benzh@chromium.org>
Signed-off-by: Curtis Malainey <cujomalainey@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
snd_soc_dai_link_event() is updating snd_soc_dai :: active,
but it is unbalance.
It counts up if it has startup callback.
case SND_SOC_DAPM_PRE_PMU:
...
snd_soc_dapm_widget_for_each_source_path(w, path) {
...
if (source->driver->ops->startup) {
...
=> source->active++;
}
...
}
...
But, always counts down
case SND_SOC_DAPM_PRE_PMD:
...
snd_soc_dapm_widget_for_each_source_path(w, path) {
...
=> source->active--;
...
}
This patch always counts up when SND_SOC_DAPM_PRE_PMD.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
File include/linux/gpio.h is generated after building
tools/testing/selftests
Add gpio.h to .gitignore to help clean up working tree status.
Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAlzh3PgeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGnhoH/jkl4X66KuOXvGXa
9pgFzyEa3Mhqs0j+AaJYmRyoRty1CbAfMLEWgr0JbZy56zm0PhtXOxcu56/tfdtw
f5j8OJLDvld10imHXxUrom9zc546Ff90VTOvWmsYznszTz0rV5HLmKgVIIc7ZN8W
6hshDOy/rviUcPAVrLKdZffzgQZlASNS7To7IBE9okT4QHEtER7dgzM/Z0VAg9R1
guCPaN8tje4vq2Lv7+J5T9LOF1RObCbKXNADwXY1rMRK5ao3xS93eDnJ8Vn08utI
UECIVfnYsA6pGl6v1ErCl9izx9MoTU3Crle7BRzVbrw7furvB2lJ1R4RGwqRbvcB
HovhmHI=
=TMir
-----END PGP SIGNATURE-----
Merge tag 'v5.2-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next
Linux 5.2-rc1
Sync with upstream (which now contains fbdev-v5.2 changes) to
prepare a base for fbdev-v5.3 changes.
drivers/gpu/drm/bochs/bochs_mm.c:19:1-3: WARNING: PTR_ERR_OR_ZERO can be used
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR
Generated by: scripts/coccinelle/api/ptr_ret.cocci
Fixes: b3a25b9af8 ("drm/bochs: Convert bochs driver to VRAM MM")
CC: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: kbuild test robot <lkp@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20190520122314.GA155389@lkp-kbuild22
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>