Commit graph

982,081 commits

Author SHA1 Message Date
David S. Miller
6ffe0acc93 wireless-drivers-next patches for 5.2
Most likely the last patchset of new feature for 5.2, and this time we
 have quite a lot of new features. Most obvious being rtw88 from
 Realtek which supports RTL8822BE and RTL8822CE 802.11ac devices. We
 have also new hardware support for existing drivers and improvements.
 
 There's one conflict in iwlwifi, my example conflict resolution below.
 
 Major changes:
 
 iwlwifi
 
 * bump the 20000-series FW API version
 
 * work on new hardware continues
 
 * RTT confidence indication support for Fine Timing Measurement (FTM)
 
 * an improvement in HE (802.11ax) rate-scaling
 
 * add command version parsing from the fimware TLVs
 
 * add support for a new WoWLAN patterns firmware API
 
 rsi
 
 * add support for rs9116
 
 mwifiex
 
 * add support for SD8987
 
 brcmfmac
 
 * add quirk for ACEPC T8 and T11 mini PCs
 
 rt2x00
 
 * add RT3883 support
 
 qtnfmac
 
 * fix debugfs interface to support multiple cards
 
 rtw88
 
 * new driver
 
 mt76
 
 * share more code across drivers
 
 * add support for MT7615 chipset
 
 * rework DMA API
 
 * tx/rx performance optimizations
 
 * use NAPI for tx cleanup on mt76x02
 
 * AP mode support for USB devices
 
 * USB stability fixes
 
 * tx power handling fixes for 76x2
 
 * endian fixes
 
 Conflicts:
 
 There's a trivial conflict in
 drivers/net/wireless/intel/iwlwifi/fw/file.h, just leave
 IWL_UCODE_TLV_FW_FSEQ_VERSION to the file. 'git diff' output should be
 just empty:
 
 diff --cc drivers/net/wireless/intel/iwlwifi/fw/file.h
 index cd622af90077,b0671e16e1ce..000000000000
 --- a/drivers/net/wireless/intel/iwlwifi/fw/file.h
 +++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJczDAZAAoJEG4XJFUm622blLgH/jdBKEq9i1m5dtLi48u4sgPV
 NsnPhR5XQjpbYpmvgPslKLxWzZq6A0P+lo9QqTXkP/QRyJLu7RnoY1c2wVsQbWaK
 VTXc0cROzWt0ihAt8Mc/rEsZpISVnQ9mJbTd/kSJM9WlDeIg0jcJvnEAdQiEmM5t
 2t+zZ5CupUXYbGE3zWHL1GSjBD9f0v7zyrNxYNGfvqhDEXhTFWAmVuRtfoAVlRU+
 dt1HMv+qdxgoF6Uvaw/kgY09mDvdrfy2EVL0q7S3TKceute60SWf7de2sToI/rMQ
 snUnVqTIIUnWPl6g+C3Bp2TbdZhy6XCSRsMFOVa2i1Lt+z1qe3dTr3hjxTQWRhE=
 =uLaP
 -----END PGP SIGNATURE-----

Merge tag 'wireless-drivers-next-for-davem-2019-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 5.2

Most likely the last patchset of new feature for 5.2, and this time we
have quite a lot of new features. Most obvious being rtw88 from
Realtek which supports RTL8822BE and RTL8822CE 802.11ac devices. We
have also new hardware support for existing drivers and improvements.

There's one conflict in iwlwifi, my example conflict resolution below.

Major changes:

iwlwifi

* bump the 20000-series FW API version

* work on new hardware continues

* RTT confidence indication support for Fine Timing Measurement (FTM)

* an improvement in HE (802.11ax) rate-scaling

* add command version parsing from the fimware TLVs

* add support for a new WoWLAN patterns firmware API

rsi

* add support for rs9116

mwifiex

* add support for SD8987

brcmfmac

* add quirk for ACEPC T8 and T11 mini PCs

rt2x00

* add RT3883 support

qtnfmac

* fix debugfs interface to support multiple cards

rtw88

* new driver

mt76

* share more code across drivers

* add support for MT7615 chipset

* rework DMA API

* tx/rx performance optimizations

* use NAPI for tx cleanup on mt76x02

* AP mode support for USB devices

* USB stability fixes

* tx power handling fixes for 76x2

* endian fixes

Conflicts:

There's a trivial conflict in
drivers/net/wireless/intel/iwlwifi/fw/file.h, just leave
IWL_UCODE_TLV_FW_FSEQ_VERSION to the file. 'git diff' output should be
just empty:

diff --cc drivers/net/wireless/intel/iwlwifi/fw/file.h
index cd622af90077,b0671e16e1ce..000000000000
--- a/drivers/net/wireless/intel/iwlwifi/fw/file.h
+++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 10:20:53 -07:00
Colin Ian King
d14a108d51 net: rds: fix spelling mistake "syctl" -> "sysctl"
There is a spelling mistake in a pr_warn warning. Fix it.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 10:19:43 -07:00
Wei Yongjun
cc0d47b8ee drivers: net: davinci_mdio: fix return value check in davinci_mdio_probe()
In case of error, the function devm_ioremap() returns NULL pointer not
ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.

Fixes: 03f66f0675 ("net: ethernet: ti: davinci_mdio: use devm_ioremap()")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 10:17:28 -07:00
Matteo Croce
594725db0c cls_cgroup: avoid panic when receiving a packet before filter set
When a cgroup classifier is added, there is a small time interval in
which tp->root is NULL. If we receive a packet in this small time slice
a NULL pointer dereference will happen, leading to a kernel panic:

    # mkdir /sys/fs/cgroup/net_cls/0
    # echo 0x100001 >  /sys/fs/cgroup/net_cls/0/net_cls.classid
    # echo $$ >/sys/fs/cgroup/net_cls/0/tasks
    # ping -qfb 255.255.255.255 -I eth0 &>/dev/null &
    # tc qdisc add dev eth0 root handle 10: htb
    # while : ; do
    > tc filter add dev eth0 parent 10: protocol ip prio 10 handle 1: cgroup
    > tc filter delete dev eth0
    > done
    Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028
    Mem abort info:
      ESR = 0x96000005
      Exception class = DABT (current EL), IL = 32 bits
      SET = 0, FnV = 0
      EA = 0, S1PTW = 0
    Data abort info:
      ISV = 0, ISS = 0x00000005
      CM = 0, WnR = 0
    user pgtable: 4k pages, 39-bit VAs, pgdp = 0000000098a7ff91
    [0000000000000028] pgd=0000000000000000, pud=0000000000000000
    Internal error: Oops: 96000005 [#1] SMP
    Modules linked in: sch_htb cls_cgroup algif_hash af_alg nls_iso8859_1 nls_cp437 vfat fat xhci_plat_hcd m25p80 spi_nor xhci_hcd mtd usbcore usb_common spi_orion sfp i2c_mv64xxx phy_generic mdio_i2c marvell10g i2c_core mvpp2 mvmdio phylink sbsa_gwdt ip_tables x_tables autofs4
    Process ping (pid: 5421, stack limit = 0x00000000b20b1505)
    CPU: 3 PID: 5421 Comm: ping Not tainted 5.1.0-rc6 #31
    Hardware name: Marvell 8040 MACCHIATOBin Double-shot (DT)
    pstate: 60000005 (nZCv daif -PAN -UAO)
    pc : cls_cgroup_classify+0x80/0xec [cls_cgroup]
    lr : cls_cgroup_classify+0x34/0xec [cls_cgroup]
    sp : ffffff8012e6b850
    x29: ffffff8012e6b850 x28: ffffffc423dd3c00
    x27: ffffff801093ebc0 x26: ffffffc425a85b00
    x25: 0000000020000000 x24: 0000000000000000
    x23: ffffff8012e6b910 x22: ffffffc428db4900
    x21: ffffff8012e6b910 x20: 0000000000100001
    x19: 0000000000000000 x18: 0000000000000000
    x17: 0000000000000000 x16: 0000000000000000
    x15: 0000000000000000 x14: 0000000000000000
    x13: 0000000000000000 x12: 000000000000001c
    x11: 0000000000000018 x10: ffffff8012e6b840
    x9 : 0000000000003580 x8 : 000000000000009d
    x7 : 0000000000000002 x6 : ffffff8012e6b860
    x5 : 000000007cd66ffe x4 : 000000009742a193
    x3 : ffffff800865b4d8 x2 : ffffff8012e6b910
    x1 : 0000000000000400 x0 : ffffffc42c38f300
    Call trace:
     cls_cgroup_classify+0x80/0xec [cls_cgroup]
     tcf_classify+0x78/0x138
     htb_enqueue+0x74/0x320 [sch_htb]
     __dev_queue_xmit+0x3e4/0x9d0
     dev_queue_xmit+0x24/0x30
     ip_finish_output2+0x2e4/0x4d0
     ip_finish_output+0x1d8/0x270
     ip_mc_output+0xa8/0x240
     ip_local_out+0x58/0x68
     ip_send_skb+0x2c/0x88
     ip_push_pending_frames+0x44/0x50
     raw_sendmsg+0x458/0x830
     inet_sendmsg+0x54/0xe8
     sock_sendmsg+0x34/0x50
     __sys_sendto+0xd0/0x120
     __arm64_sys_sendto+0x30/0x40
     el0_svc_common.constprop.0+0x88/0xf8
     el0_svc_handler+0x2c/0x38
     el0_svc+0x8/0xc
    Code: 39496001 360002a1 b9425c14 34000274 (79405260)

Fixes: ed76f5edcc ("net: sched: protect filter_chain list with filter_chain_lock mutex")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 10:00:17 -07:00
Paul Bolle
4014dfae3c isdn: bas_gigaset: use usb_fill_int_urb() properly
The switch to make bas_gigaset use usb_fill_int_urb() - instead of
filling that urb "by hand" - missed the subtle ordering of the previous
code.

See, before the switch urb->dev was set to a member somewhere deep in a
complicated structure and then supplied to usb_rcvisocpipe() and
usb_sndisocpipe(). After that switch urb->dev wasn't set to anything
specific before being supplied to those two macros. This triggers a
nasty oops:

    BUG: unable to handle kernel NULL pointer dereference at 00000000
    #PF error: [normal kernel read fault]
    *pde = 00000000
    Oops: 0000 [#1] SMP
    CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.1.0-0.rc4.1.local0.fc28.i686 #1
    Hardware name: IBM 2525FAG/2525FAG, BIOS 74ET64WW (2.09 ) 12/14/2006
    EIP: gigaset_init_bchannel+0x89/0x320 [bas_gigaset]
    Code: 75 07 83 8b 84 00 00 00 40 8d 47 74 c7 07 01 00 00 00 89 45 f0 8b 44 b7 68 85 c0 0f 84 6a 02 00 00 8b 48 28 8b 93 88 00 00 00 <8b> 09 8d 54 12 03 c1 e2 0f c1 e1 08 09 ca 8b 8b 8c 00 00 00 80 ca
    EAX: f05ec200 EBX: ed404200 ECX: 00000000 EDX: 00000000
    ESI: 00000000 EDI: f065a000 EBP: f30c9f40 ESP: f30c9f20
    DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010086
    CR0: 80050033 CR2: 00000000 CR3: 0ddc7000 CR4: 000006d0
    Call Trace:
     <SOFTIRQ>
     ? gigaset_isdn_connD+0xf6/0x140 [gigaset]
     gigaset_handle_event+0x173e/0x1b90 [gigaset]
     tasklet_action_common.isra.16+0x4e/0xf0
     tasklet_action+0x1e/0x20
     __do_softirq+0xb2/0x293
     ? __irqentry_text_end+0x3/0x3
     call_on_stack+0x45/0x50
     </SOFTIRQ>
     ? irq_exit+0xb5/0xc0
     ? do_IRQ+0x78/0xd0
     ? acpi_idle_enter_s2idle+0x50/0x50
     ? common_interrupt+0xd4/0xdc
     ? acpi_idle_enter_s2idle+0x50/0x50
     ? sched_cpu_activate+0x1b/0xf0
     ? acpi_fan_resume.cold.7+0x9/0x18
     ? cpuidle_enter_state+0x152/0x4c0
     ? cpuidle_enter+0x14/0x20
     ? call_cpuidle+0x21/0x40
     ? do_idle+0x1c8/0x200
     ? cpu_startup_entry+0x25/0x30
     ? rest_init+0x88/0x8a
     ? arch_call_rest_init+0xd/0x19
     ? start_kernel+0x42f/0x448
     ? i386_start_kernel+0xac/0xb0
     ? startup_32_smp+0x164/0x168
    Modules linked in: ppp_generic slhc capi bas_gigaset gigaset kernelcapi nf_conntrack_netbios_ns nf_conntrack_broadcast xt_CT ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_nat ip6table_mangle ip6table_raw ip6table_security iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c iptable_mangle iptable_raw iptable_security ebtable_filter ebtables ip6table_filter ip6_tables sunrpc ipw2200 iTCO_wdt gpio_ich snd_intel8x0 libipw iTCO_vendor_support snd_ac97_codec lib80211 ppdev ac97_bus snd_seq cfg80211 snd_seq_device pcspkr thinkpad_acpi lpc_ich snd_pcm i2c_i801 snd_timer ledtrig_audio snd soundcore rfkill parport_pc parport pcc_cpufreq acpi_cpufreq i915 i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sdhci_pci sysimgblt cqhci fb_sys_fops drm sdhci mmc_core tg3 ata_generic serio_raw yenta_socket pata_acpi video
    CR2: 0000000000000000
    ---[ end trace 1fe07487b9200c73 ]---
    EIP: gigaset_init_bchannel+0x89/0x320 [bas_gigaset]
    Code: 75 07 83 8b 84 00 00 00 40 8d 47 74 c7 07 01 00 00 00 89 45 f0 8b 44 b7 68 85 c0 0f 84 6a 02 00 00 8b 48 28 8b 93 88 00 00 00 <8b> 09 8d 54 12 03 c1 e2 0f c1 e1 08 09 ca 8b 8b 8c 00 00 00 80 ca
    EAX: f05ec200 EBX: ed404200 ECX: 00000000 EDX: 00000000
    ESI: 00000000 EDI: f065a000 EBP: f30c9f40 ESP: cddcb3bc
    DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010086
    CR0: 80050033 CR2: 00000000 CR3: 0ddc7000 CR4: 000006d0
    Kernel panic - not syncing: Fatal exception in interrupt
    Kernel Offset: 0xcc00000 from 0xc0400000 (relocation range: 0xc0000000-0xf6ffdfff)
    ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

No-one noticed because this Oops is apparently only triggered by setting
up an ISDN data connection on a live ISDN line on a gigaset base (ie,
the PBX that the gigaset driver support). Very few people do that
running present day kernels.

Anyhow, a little code reorganization makes this problem go away, while
avoiding the subtle ordering that was used in the past. So let's do
that.

Fixes: 78c696c195 ("isdn: gigaset: use usb_fill_int_urb()")
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 09:54:08 -07:00
Linus Torvalds
51987affd6 Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:

 - a couple of ->i_link use-after-free fixes

 - regression fix for wrong errno on absent device name in mount(2)
   (this cycle stuff)

 - ancient UFS braino in large GID handling on Solaris UFS images (bogus
   cut'n'paste from large UID handling; wrong field checked to decide
   whether we should look at old (16bit) or new (32bit) field)

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  ufs: fix braino in ufs_get_inode_gid() for solaris UFS flavour
  Abort file_remove_privs() for non-reg. files
  [fix] get rid of checking for absent device name in vfs_get_tree()
  apparmorfs: fix use-after-free on symlink traversal
  securityfs: fix use-after-free on symlink traversal
2019-05-05 09:28:45 -07:00
Philippe Schenker
b1f4c9a3c7 iio: stmpe-adc: Remove unnecessary assignment
Remove unnecessary assignment. This could potentially cause an issue, if
the wait function runs into a timeout. Furthermore is this assignment also
not there in stmpe_read_temp()

Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-05 16:38:01 +01:00
Vatsala Narang
c57c54bc97 staging: iio: adc: Add paragraph to describe Kconfig symbol
This patch updates Kconfig with paragraph that describe config symbol
fully.Issue addressed by checkpatch.

Signed-off-by: Vatsala Narang <vatsalanarang@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-05 13:10:51 +01:00
João Seckler
a8b7ca187f staging: iio: adt7316: match parenthesis alignment
This patch solves the following checkpatch.pl message:
CHECK: Alignment should match open parenthesis.
This makes the file more compliant with the preferred coding style for
the Linux kernel.

Signed-off-by: João Seckler <joaoseckler@gmail.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-05 13:06:11 +01:00
Geert Uytterhoeven
5c25531d4b iio: adc: rcar-gyroadc: Remove devm_iio_device_alloc() error printing
devm_iio_device_alloc() can only fail due to a memory or IDA allocation
failure.  Hence there is no need to print a message, as the memory
allocation or IIO core code already takes care of that.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-05 12:51:07 +01:00
Brian Masney
cf54f4dd07 dt-bindings: iio: isl29018: convert bindings to YAML format
Convert the isl29018 device tree bindings to the new YAML format.

Signed-off-by: Brian Masney <masneyb@onstation.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-05 12:39:52 +01:00
Zhiyong Tao
7fc1148cfd dt-bindings: adc: mt8183: add binding document
The commit adds mt8183 compatible node in binding document.

Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2019-05-05 12:36:38 +01:00
Jiri Olsa
6f55967ad9 perf/x86/intel: Fix race in intel_pmu_disable_event()
New race in x86_pmu_stop() was introduced by replacing the
atomic __test_and_clear_bit() of cpuc->active_mask by separate
test_bit() and __clear_bit() calls in the following commit:

  3966c3feca ("x86/perf/amd: Remove need to check "running" bit in NMI handler")

The race causes panic for PEBS events with enabled callchains:

  BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
  ...
  RIP: 0010:perf_prepare_sample+0x8c/0x530
  Call Trace:
   <NMI>
   perf_event_output_forward+0x2a/0x80
   __perf_event_overflow+0x51/0xe0
   handle_pmi_common+0x19e/0x240
   intel_pmu_handle_irq+0xad/0x170
   perf_event_nmi_handler+0x2e/0x50
   nmi_handle+0x69/0x110
   default_do_nmi+0x3e/0x100
   do_nmi+0x11a/0x180
   end_repeat_nmi+0x16/0x1a
  RIP: 0010:native_write_msr+0x6/0x20
  ...
   </NMI>
   intel_pmu_disable_event+0x98/0xf0
   x86_pmu_stop+0x6e/0xb0
   x86_pmu_del+0x46/0x140
   event_sched_out.isra.97+0x7e/0x160
  ...

The event is configured to make samples from PEBS drain code,
but when it's disabled, we'll go through NMI path instead,
where data->callchain will not get allocated and we'll crash:

          x86_pmu_stop
            test_bit(hwc->idx, cpuc->active_mask)
            intel_pmu_disable_event(event)
            {
              ...
              intel_pmu_pebs_disable(event);
              ...

EVENT OVERFLOW ->  <NMI>
                     intel_pmu_handle_irq
                       handle_pmi_common
   TEST PASSES ->        test_bit(bit, cpuc->active_mask))
                           perf_event_overflow
                             perf_prepare_sample
                             {
                               ...
                               if (!(sample_type & __PERF_SAMPLE_CALLCHAIN_EARLY))
                                     data->callchain = perf_callchain(event, regs);

         CRASH ->              size += data->callchain->nr;
                             }
                   </NMI>
              ...
              x86_pmu_disable_event(event)
            }

            __clear_bit(hwc->idx, cpuc->active_mask);

Fixing this by disabling the event itself before setting
off the PEBS bit.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Arcari <darcari@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Lendacky Thomas <Thomas.Lendacky@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Fixes: 3966c3feca ("x86/perf/amd: Remove need to check "running" bit in NMI handler")
Link: http://lkml.kernel.org/r/20190504151556.31031-1-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-05 13:00:48 +02:00
Richard Weinberger
1c7cbd6347 NAND core changes:
- Support having the bad block markers in either the first, second or
   last page of a block. The combination of all three location is now
   possible.
 - Constification of NAND_OP_PARSER(_PATTERN) elements.
 - Generic NAND DT bindings changed to yaml format (can be used to
   check the proposed bindings. First platform to be fully supported:
   sunxi.
 - Stopped using several legacy hooks.
 - Preparation to use the generic NAND layer with the addition of
   several helpers and the removal of the struct nand_chip from generic
   functions.
 - Kconfig cleanup to prepare the introduction of external ECC engines
   support.
 - Fallthrough comments.
 - Introduction of the SPI-mem dirmap API for SPI-NAND devices.
 
 Raw NAND controller drivers changes:
 - nandsim:
   * Switch to ->exec-op().
 - meson:
   * Misc cleanups and fixes.
   * New OOB layout.
 - Sunxi:
   * A23/A33 NAND DMA support.
 - Ingenic:
   * Full reorganization and cleanup.
   * Clear separation between NAND controller and ECC engine.
   * Support JZ4740 an JZ4725B.
 - Denali:
   * Clear controller/chip separation.
   * ->exec_op() migration.
   * Various cleanups.
 - fsl_elbc:
   * Enable software ECC support.
 - Atmel:
   * Sam9x60 support.
 - GPMI:
   * Introduce the GPMI_IS_MXS() macro.
 - Various trivial/spelling/coding style fixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEE9HuaYnbmDhq/XIDIJWrqGEe9VoQFAly4rnMACgkQJWrqGEe9
 VoSBzAgAmSx1rDxiX2033dhVvufCcqMQnkY1fguKo69lYkhgGI1EYwvq2NbGLCf4
 rb7n+D1peYhzH/9GKz4/LPQPccoVIQnx9+Z+JMZRzyQ+Z73cuomX/DtQO0AsRZgE
 bx88vsbQFtjWv0mVluIEs51e3B/4ya6KPotxUDcaAyp2s/VKPaEI1rpiteUx8lZC
 QsPsYQG/ryYiBW0cmopRL6c7ZdXyWi5A0kEdypGyO8ybTxo8xBquFqhbraDlM4U2
 2H3Ii3iV9HoVTyjG2nGIA094Ak0U029oWW+P9xAPf1L4z6WIVXD68sazpZng+t8s
 HgWP7BYDpcdRj+/Dm1b+uoaJH1fvOQ==
 =B7w9
 -----END PGP SIGNATURE-----

Merge tag 'nand/for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

NAND core changes:
- Support having the bad block markers in either the first, second or
  last page of a block. The combination of all three location is now
  possible.
- Constification of NAND_OP_PARSER(_PATTERN) elements.
- Generic NAND DT bindings changed to yaml format (can be used to
  check the proposed bindings. First platform to be fully supported:
  sunxi.
- Stopped using several legacy hooks.
- Preparation to use the generic NAND layer with the addition of
  several helpers and the removal of the struct nand_chip from generic
  functions.
- Kconfig cleanup to prepare the introduction of external ECC engines
  support.
- Fallthrough comments.
- Introduction of the SPI-mem dirmap API for SPI-NAND devices.

Raw NAND controller drivers changes:
- nandsim:
  * Switch to ->exec-op().
- meson:
  * Misc cleanups and fixes.
  * New OOB layout.
- Sunxi:
  * A23/A33 NAND DMA support.
- Ingenic:
  * Full reorganization and cleanup.
  * Clear separation between NAND controller and ECC engine.
  * Support JZ4740 an JZ4725B.
- Denali:
  * Clear controller/chip separation.
  * ->exec_op() migration.
  * Various cleanups.
- fsl_elbc:
  * Enable software ECC support.
- Atmel:
  * Sam9x60 support.
- GPMI:
  * Introduce the GPMI_IS_MXS() macro.
- Various trivial/spelling/coding style fixes.
2019-05-05 11:54:11 +02:00
Colin Xu
75fdb811d9 drm/i915/gvt: Add in context mmio 0x20D8 to gen9 mmio list
Depends on GEN family and I915_PARAM_HAS_CONTEXT_ISOLATION, Mesa driver
will decide whether constant buffer 0 address is relative or absolute,
and load GPU initial state by lri to context mmio INSTPM (GEN8)
or 0x20D8 (>=GEN9).
Mesa Commit fa8a764b62
("i965: Use absolute addressing for constant buffer 0 on Kernel 4.16+.")

INSTPM is already added to gen8_engine_mmio_list, but 0x20D8 is missed
in gen9_engine_mmio_list. From GVT point of view, different guest could
have different context so should switch those mmio accordingly.

v2: Update fixes commit ID.

Fixes: 1786571393 ("drm/i915/gvt: vGPU context switch")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
(cherry picked from commit 1e8b15a198)
2019-05-05 17:02:25 +08:00
Heiner Kallweit
b4010af981 net: phy: fix phy_validate_pause
We have valid scenarios where ETHTOOL_LINK_MODE_Pause_BIT doesn't
need to be supported. Therefore extend the first check to check
for rx_pause being set.

See also phy_set_asym_pause:
rx=0 and tx=1: advertise asym pause only
rx=0 and tx=0: stop advertising both pause modes

The fixed commit isn't wrong, it's just the one that introduced the
linkmode bitmaps.

Fixes: 3c1bcc8614 ("net: ethernet: Convert phydev advertize and supported from u32 to link mode")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 01:04:10 -07:00
Colin Ian King
ca96534630 openvswitch: check for null pointer return from nla_nest_start_noflag
The call to nla_nest_start_noflag can return null in the unlikely
event that nla_put returns -EMSGSIZE.  Check for this condition to
avoid a null pointer dereference on pointer nla_reply.

Addresses-Coverity: ("Dereference null return value")
Fixes: 11efd5cb04 ("openvswitch: Support conntrack zone limit")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Yi-Hung Wei <yihung.wei@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 00:52:07 -07:00
David S. Miller
f4b47a5945 Merge branch 'ipv4-Move-location-of-pcpu-route-cache-and-exceptions'
David Ahern says:

====================
ipv4: Move location of pcpu route cache and exceptions

This series moves IPv4 pcpu cached routes from fib_nh to fib_nh_common
to make the caches available for IPv6 nexthops (fib6_nh) with IPv4
routes. This allows a fib6_nh struct to be used with both IPv4 and
and IPv6 routes.

v4
- fixed memleak if encap_type is not set as noticed by Ido

v3
- dropped ipv6 patches for now. Will resubmit those once the existing
  refcnt problem is fixed

v2
- reverted patch 2 to use ifdef CONFIG_IP_ROUTE_CLASSID instead
  of IS_ENABLED(CONFIG_IP_ROUTE_CLASSID) to fix compile issues
  reported by kbuild test robot
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 00:47:16 -07:00
David Ahern
a5995e7107 ipv4: Move exception bucket to nh_common
Similar to the cached routes, make IPv4 exceptions accessible when
using an IPv6 nexthop struct with IPv4 routes. Simplify the exception
functions by passing in fib_nh_common since that is all it needs,
and then cleanup the call sites that have extraneous fib_nh conversions.

As with the cached routes this is a change in location only, from fib_nh
up to fib_nh_common; no functional change intended.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 00:47:16 -07:00
David Ahern
87063a1fa6 ipv4: Pass fib_nh_common to rt_cache_route
Now that the cached routes are in fib_nh_common, pass it to
rt_cache_route and simplify its callers. For rt_set_nexthop,
the tclassid becomes the last user of fib_nh so move the
container_of under the #ifdef CONFIG_IP_ROUTE_CLASSID.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 00:47:16 -07:00
David Ahern
0f457a3662 ipv4: Move cached routes to fib_nh_common
While the cached routes, nh_pcpu_rth_output and nh_rth_input, are IPv4
specific, a later patch wants to make them accessible for IPv6 nexthops
with IPv4 routes using a fib6_nh. Move the cached routes from fib_nh to
fib_nh_common and update references.

Initialization of the cached entries is moved to fib_nh_common_init,
and free is moved to fib_nh_common_release.

Change in location only, from fib_nh up to fib_nh_common; no functional
change intended.

Signed-off-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05 00:47:16 -07:00
William Tu
7080da8909 libbpf: add libbpf_util.h to header install.
The libbpf_util.h is used by xsk.h, so add it to
the install headers.

Reported-by: Ben Pfaff <blp@ovn.org>
Signed-off-by: William Tu <u9012063@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-05 00:06:59 -07:00
Vineet Gupta
ca31ca8247 tools/bpf: fix perf build error with uClibc (seen on ARC)
When build perf for ARC recently, there was a build failure due to lack
of __NR_bpf.

| Auto-detecting system features:
|
| ...                     get_cpuid: [ OFF ]
| ...                           bpf: [ on  ]
|
| #  error __NR_bpf not defined. libbpf does not support your arch.
    ^~~~~
| bpf.c: In function 'sys_bpf':
| bpf.c:66:17: error: '__NR_bpf' undeclared (first use in this function)
|  return syscall(__NR_bpf, cmd, attr, size);
|                 ^~~~~~~~
|                 sys_bpf

Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-05 00:04:01 -07:00
Masahiro Yamada
a7d0067147 bpftool: exclude bash-completion/bpftool from .gitignore pattern
tools/bpf/bpftool/.gitignore has the "bpftool" pattern, which is
intended to ignore the following build artifact:

  tools/bpf/bpftool/bpftool

However, the .gitignore entry is effective not only for the current
directory, but also for any sub-directories.

So, from the point of .gitignore grammar, the following check-in file
is also considered to be ignored:

  tools/bpf/bpftool/bash-completion/bpftool

As the manual gitignore(5) says "Files already tracked by Git are not
affected", this is not a problem as far as Git is concerned.

However, Git is not the only program that parses .gitignore because
.gitignore is useful to distinguish build artifacts from source files.

For example, tar(1) supports the --exclude-vcs-ignore option. As of
writing, this option does not work perfectly, but it intends to create
a tarball excluding files specified by .gitignore.

So, I believe it is better to fix this issue.

You can fix it by prefixing the pattern with a slash; the leading slash
means the specified pattern is relative to the current directory.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-04 23:43:57 -07:00
Alexei Starovoitov
ec1c8fa04f Merge branch 'af_xdp-fixes'
Björn Töpel says:

====================
William found two bugs, when doing socket teardown within the same
process.

The first issue was an invalid munmap call, and the second one was an
invalid XSKMAP cleanup. Both resulted in that the process kept
references to the socket, which was not correctly cleaned up. When a
new socket was created, the bind() call would fail, since the old
socket was still lingering, refusing to give up the queue on the
netdev.

More details can be found in the individual commits.

Thanks,
Björn
====================

Reviewed-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-04 23:26:38 -07:00
Björn Töpel
5750902a6e libbpf: proper XSKMAP cleanup
The bpf_map_update_elem() function, when used on an XSKMAP, will fail
if not a valid AF_XDP socket is passed as value. Therefore, this is
function cannot be used to clear the XSKMAP. Instead, the
bpf_map_delete_elem() function should be used for that.

This patch also simplifies the code by breaking up
xsk_update_bpf_maps() into three smaller functions.

Reported-by: William Tu <u9012063@gmail.com>
Fixes: 1cad078842 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-04 23:26:22 -07:00
Björn Töpel
0e6741f092 libbpf: fix invalid munmap call
When unmapping the AF_XDP memory regions used for the rings, an
invalid address was passed to the munmap() calls. Instead of passing
the beginning of the memory region, the descriptor region was passed
to munmap.

When the userspace application tried to tear down an AF_XDP socket,
the operation failed and the application would still have a reference
to socket it wished to get rid of.

Reported-by: William Tu <u9012063@gmail.com>
Fixes: 1cad078842 ("libbpf: add support for using AF_XDP sockets")
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Tested-by: William Tu <u9012063@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-04 23:26:22 -07:00
Yonghong Song
6cea33701e selftests/bpf: set RLIMIT_MEMLOCK properly for test_libbpf_open.c
Test test_libbpf.sh failed on my development server with failure
  -bash-4.4$ sudo ./test_libbpf.sh
  [0] libbpf: Error in bpf_object__probe_name():Operation not permitted(1).
      Couldn't load basic 'r0 = 0' BPF program.
  test_libbpf: failed at file test_l4lb.o
  selftests: test_libbpf [FAILED]
  -bash-4.4$

The reason is because my machine has 64KB locked memory by default which
is not enough for this program to get locked memory.
Similar to other bpf selftests, let us increase RLIMIT_MEMLOCK
to infinity, which fixed the issue.

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-04 23:23:51 -07:00
YueHaibing
71f150f4c2 bpf: Use PTR_ERR_OR_ZERO in bpf_fd_sk_storage_update_elem()
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-05-04 23:20:58 -07:00
Martyna Szapar
0b63644602 i40e: Memory leak in i40e_config_iwarp_qvlist
Added freeing the old allocation of vf->qvlist_info in function
i40e_config_iwarp_qvlist before overwriting it with
the new allocation.

Signed-off-by: Martyna Szapar <martyna.szapar@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 17:45:22 -07:00
Martyna Szapar
24474f2709 i40e: Fix of memory leak and integer truncation in i40e_virtchnl.c
Fixed possible memory leak in i40e_vc_add_cloud_filter function:
cfilter is being allocated and in some error conditions
the function returns without freeing the memory.

Fix of integer truncation from u16 (type of queue_id value) to u8
when calling i40e_vc_isvalid_queue_id function.

Signed-off-by: Martyna Szapar <martyna.szapar@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 17:40:25 -07:00
Gustavo A. R. Silva
825f0a4eb7 i40e: Use struct_size() in kzalloc()
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    struct boo entry[];
};

size = sizeof(struct foo) + count * sizeof(struct boo);
instance = kzalloc(size, GFP_KERNEL)

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL)

Notice that, in this case, variable size is not necessary, hence it
is removed.

This code was detected with the help of Coccinelle.

Signed-off-by: "Gustavo A. R. Silva" <gustavo@embeddedor.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 17:34:43 -07:00
Maciej Paczkowski
0a92892c69 i40e: Revert ShadowRAM checksum calculation change
The reason of this revert is unexpected issue found in NVM Update tool
during NVM image downgrade. The implementation is no longer needed
since the QV tools are already aware of new FW double ShadowRAM dump
mechanism.

This patch reverts ShadowRAM checksum calculation change introduced in
commit 9d12f0c4e436 ("i40e: Revert ShadowRAM checksum calculation change")

Signed-off-by: Maciej Paczkowski <maciej.paczkowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 17:30:58 -07:00
Martyna Szapar
d29e0d233e i40e: missing input validation on VF message handling by the PF
Patch is adding missing input validation on VF message handling
by the PF to the functions with opcodes:
	VIRTCHNL_OP_CONFIG_VSI_QUEUES = 6
	VIRTCHNL_OP_CONFIG_IRQ_MAP = 7,
	VIRTCHNL_OP_DISABLE_QUEUES = 9,
	VIRTCHNL_OP_CONFIG_PROMISCUOUS_MODE = 14,

Signed-off-by: Martyna Szapar <martyna.szapar@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 17:28:04 -07:00
Aleksandr Loktionov
2e45d3f467 i40e: Add support for X710 B/P & SFP+ cards
New device ids are created to support X710 backplane and SFP+ cards.

This patch adds in i40e driver support for 2.5GbaseT and 5GbaseT speed.
It's implemented by checking I40E_CAP_PHY_TYPE_2_5GBASE_T,
I40E_CAP_PHY_TYPE_5GBASE_T bits from f/w and setting corresponding bits
in ethtool link ksettings supported and advertising masks.

Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Signed-off-by: Alice Michael <alice.michael@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 17:24:48 -07:00
Grzegorz Siwik
c004804dce i40e: Wrong truncation from u16 to u8
In this patch fixed wrong truncation method from u16 to u8 during
validation.

It was changed by changing u8 to u32 parameter in method declaration
and arguments were changed to u32.

Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 17:22:48 -07:00
Sergey Nemov
7015ca3df9 i40e: add num_vectors checker in iwarp handler
Field num_vectors from struct virtchnl_iwarp_qvlist_info should not be
larger than num_msix_vectors_vf in the hw struct.  The iwarp uses the
same set of vectors as the LAN VF driver.

Signed-off-by: Sergey Nemov <sergey.nemov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 17:21:07 -07:00
Grzegorz Siwik
1aa874b42e i40e: Fix the typo in adding 40GE KR4 mode
This patch fixes the typo in I40E_CAP_PHY_TYPE mode link code.
It was fixed by changing 40000baseLR4_Full to 40000baseKR4_Full

Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 17:16:47 -07:00
Grzegorz Siwik
40a23040d8 i40e: Setting VF to VLAN 0 requires restart
This patch fixes a bug where changing VLAN to 0 was not set until VF
restart.

Now we are setting pvid info to 0 when we have to change VLAN to 0.
Without this change when VF VLAN was changed to 0 nothing happened until
VF restart. For changing to VLAN different than 0 it worked correctly.

Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 17:13:30 -07:00
Aleksandr Loktionov
e576e76966 i40e: add new pci id for X710/XXV710 N3000 cards
New device ids are created to support X710/XXV710 N3000 cards.

Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 17:10:52 -07:00
Grzegorz Siwik
937f599a11 i40e: VF's promiscuous attribute is not kept
This patch fixes a bug where the promiscuous mode was not being
kept when the VF switched to a new VLAN.
Now we are config two times a promiscuous mode when we switch VLAN.
Without this change when we change VF VLAN we still receive
all the packets from previous VLAN and only unicast from new VLAN.

Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 16:55:34 -07:00
Michal Swiatkowski
64439f8f0b ice: Disable sniffing VF traffic on PF
Delete code that add default Tx rule on PF. With this rule PF can see
Tx VF traffic that should go outside. For traffic from VF to another
VF default Tx rule on PF doesn't apply because of lower priority than
VF mac rule.

With this change on PF in promisc mode we can see only Rx traffic that
doesn't match any other rule (mac etc.). We can't see Tx traffic from
other VSI.

Signed-off-by: Michal Swiatkowski <michal.swiatkowski@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 14:44:47 -07:00
Jesse Brandeburg
0690527014 ice: Use more efficient structures
Move a bunch of members around to make more efficient use of
memory, eliminating holes where possible. None of these members
are hot path so cache line alignment is not very important here.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 14:40:36 -07:00
Jesse Brandeburg
0437f1a98a ice: Use bitfields where possible
The driver was converted to not use bool, but it was
neglected that the bools should have been converted to bit fields
as bit fields in software structures are ok, as long as they
use the correct kinds of unsigned types. This avoids
wasting lots of storage space to store single bit values.

One of the change hunks moves a variable lport out of
a group of "combinable" bit fields because all bits of
the u8 lport are valid and the variable can be packed in the
struct in struct holes.

Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 14:38:57 -07:00
Akeem G Abodunrin
d95276ced0 ice: Add function to program ethertype based filter rule on VSIs
This patch adds function to program VSI with ethertype based filter rule,
so that all flow control frames would be disallowed from being transmitted
to the client, in order to prevent malicious VSI, especially VF from
sending out PAUSE or PFC frames, and then control other VSIs traffic.

Signed-off-by: Akeem G Abodunrin <akeem.g.abodunrin@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 14:36:28 -07:00
Tony Nguyen
8f529ff912 ice: Separate if conditions for ice_set_features()
Set features can have multiple features turned on|off in a single
call.  Grouping these all in an if/else means after one condition
is met, other conditions/features will not be evaluated.  Break
the if/else statements by feature to ensure all features will be
handled properly.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 14:33:44 -07:00
Tony Nguyen
a03499d614 ice: Remove __always_unused attribute
The variable netdev is being used in this function; remove the
__always_unused attribute from it.

Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 14:31:59 -07:00
Bruce Allan
c3a6825e82 ice: Suppress false-positive style issues reported by static analyzer
A recent version of cppcheck falsely reports-
    Variable ip.hdr is assigned a value that is never used.

ip is a union so the pointer ip.hdr is actually used when referenced as
ip.v4 and ip.v6.  Silence these false reports when using cppcheck with the
--inline-suppr command-line option.

Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 14:30:05 -07:00
Brett Creeley
e40c899a64 ice: Refactor getting/setting coalesce
Currently if the driver has an uneven amount of Rx/Tx queues
setting the coalesce settings through ethtool will result in
an error. This is happening because in the setting coalesce
flow we are reporting an error if either Rx or Tx fails.

Also, the flow for setting/getting per_q_coalesce and
setting/getting coalesce settings for the entire device
is different.

Fix these issues by adding one function, ice_set_q_coalesce(),
and another, ice_get_q_coalesce(), that both getting/setting
per_q and entire device coalesce can use. This makes handling
the error cases generic between the two flows and simplifies
__ice_set_coalesce() and __ice_get_coalesce().

Also, add a header comment to __ice_set_coalesce().

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 14:25:26 -07:00
Brett Creeley
a85a3847fb ice: Always free/allocate q_vectors
Currently when probing/removing the driver we allocate/deallocate
each vsi->q_vectors array in ice_vsi_alloc_arrays() and
ice_vsi_free_arrays() respectively. However, we don't do this
during the reset and VSI rebuild flow. This is inconsistent
and unnecessary to have a difference between the two flows.

This patch makes the change to always allocate/deallocate the
vsi->q_vectors array regardless of the driver flow we are in.

Also, update the comment for ice_vsi_free_arrays() to be more
descriptive.

Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04 14:22:55 -07:00