Commit graph

982,081 commits

Author SHA1 Message Date
David S. Miller
f3f050a4df mlx5-updates-2019-04-30
mlx5 misc updates:
 
 1) Bodong Wang and Parav Pandit (6):
    - Remove unused mlx5_query_nic_vport_vlans
    - vport macros refactoring
    - Fix vport access in E-Switch
    - Use atomic rep state to serialize state change
 
 2) Eli Britstein (2):
    - prio tag mode support, added ACLs and replace TC vlan pop with
      vlan 0 rewrite when prio tag mode is enabled.
 
 3) Erez Alfasi (2):
    - ethtool: Add SFF-8436 and SFF-8636 max EEPROM length definitions
    - mlx5e: ethtool, Add support for EEPROM high pages query
 
 4) Masahiro Yamada (1):
    - remove meaningless CFLAGS_tracepoint.o
 
 5) Maxim Mikityanskiy (1):
    - Put the common XDP code into a function
 
 6) Tariq Toukan (2):
    - Turn on HW tunnel offload in all TIRs
 
 7) Vlad Buslov (1):
    - Return error when trying to insert existing flower filter
 -----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJcyhIFAAoJEEg/ir3gV/o+LgsH/idNT42AQewm2gn1NAt/njRx
 hA/ILH4ZmqYD8tgme5q3lByGrGRTweCPQ92+/tYP1i90PL8EJKNFbRPXuORp+hUk
 m+ywoeyBHx0ZyDlAIGNDCFprY//jZV/3XQKuJhLUliGfN77lUSkVtIz2UY+cDr2U
 XBn0B3Fy54+XP7EqVHXdxRkLiwDCsDwZBF6O9/1cw/rKsly6fIzw1b7UVjFaFA8f
 1g5Ca/+v4X0Rsky1KOGLv8HVB4bxbiSZspAjKwVGJagPUNJMRR6xZyL+VNHWX71R
 N68VMQQbwg7XDDFQNtYAFSpxOkAY+wilkRDe7+3A50cFE8ZYYskwVJunvb75fCA=
 =oqb8
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-updates-2019-04-30' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2019-04-30

mlx5 misc updates:

1) Bodong Wang and Parav Pandit (6):
   - Remove unused mlx5_query_nic_vport_vlans
   - vport macros refactoring
   - Fix vport access in E-Switch
   - Use atomic rep state to serialize state change

2) Eli Britstein (2):
   - prio tag mode support, added ACLs and replace TC vlan pop with
     vlan 0 rewrite when prio tag mode is enabled.

3) Erez Alfasi (2):
   - ethtool: Add SFF-8436 and SFF-8636 max EEPROM length definitions
   - mlx5e: ethtool, Add support for EEPROM high pages query

4) Masahiro Yamada (1):
   - remove meaningless CFLAGS_tracepoint.o

5) Maxim Mikityanskiy (1):
   - Put the common XDP code into a function

6) Tariq Toukan (2):
   - Turn on HW tunnel offload in all TIRs

7) Vlad Buslov (1):
   - Return error when trying to insert existing flower filter
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:25:02 -04:00
David S. Miller
18af9626d9 Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
100GbE Intel Wired LAN Driver Updates 2019-05-02

This series contains updates to the ice driver only.

Anirudh introduces the framework to store queue specific information in
the VSI queue contexts.  This will allow future changes to update the
structure to hold queue specific information.

Akeem adds additional check so that if there is no queue to disable when
attempting to disable a queue, return a configuration error without
acquiring the lock.  Fixed an issue with non-trusted VFs being able to
add more than the permitted number of VLANs.

Bruce removes unreachable code and updated the function to return void
since it would never return anything but success.

Brett provides most of the changes in the series, starting with reducing
the scope of the error variable used and improved the debug message if
we fail to configure the receive queue.  Updates the driver to use a
macro instead of using the same 'for' loop throughout the driver which
helps with readability.  Fixed an issue where users were led to believe
they could set rx-usecs-high value, yet the changes to this value would
not stick because it was not yet implemented to allow changes to this
value, so implement the missing code to change the value.  Found we had
unnecessary wait when disabling queues, so remove it.  I,proved a
wasteful addition operation in our hot path by adding a member to the
ice_q_vector structure and the necessary changes to use the member which
stores the calculated vector hardware index.  Refactored the link event
flow to make it cleaner and more clear.

Maciej updates the array index when stopping transmit rings, so that
process every ring the VSI, not just the rings in a given transmit
class.

Paul adds support for setting 52 byte RSS hash keys.

Md Fahad cleaned up a runtime change to the PFINT_OICR_ENA register,
since the interrupt handlers will handle resetting the bit, if
necessary.

Tony adds a missing PHY type, which was causing warning message about an
unrecognized PHY.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:20:52 -04:00
David S. Miller
f0c5bcf2f4 Merge branch 'ena-fixes'
Sameeh Jubran says:

====================
Bug fixes for ENA Ethernet driver

Sameeh Jubran (8):
  net: ena: fix swapped parameters when calling
    ena_com_indirect_table_fill_entry
  net: ena: fix: set freed objects to NULL to avoid failing future
    allocations
  net: ena: fix: Free napi resources when ena_up() fails
  net: ena: fix incorrect test of supported hash function
  net: ena: fix return value of ena_com_config_llq_info()
  net: ena: improve latency by disabling adaptive interrupt moderation
    by default
  net: ena: fix ena_com_fill_hash_function() implementation
  net: ena: gcc 8: fix compilation warning
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:14:47 -04:00
Sameeh Jubran
f913308879 net: ena: gcc 8: fix compilation warning
GCC 8 contains a number of new warnings as well as enhancements to existing
checkers. The warning - Wstringop-truncation - warns for calls to bounded
string manipulation functions such as strncat, strncpy, and stpncpy that
may either truncate the copied string or leave the destination unchanged.

In our case the destination string length (32 bytes) is much shorter than
the source string (64 bytes) which causes this warning to show up. In
general the destination has to be at least a byte larger than the length
of the source string with strncpy for this warning not to showup.

This can be easily fixed by using strlcpy instead which already does the
truncation to the string. Documentation for this function can be
found here:

https://elixir.bootlin.com/linux/latest/source/lib/string.c#L141

Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:14:47 -04:00
Sameeh Jubran
11bd7a00c0 net: ena: fix ena_com_fill_hash_function() implementation
ena_com_fill_hash_function() didn't configure the rss->hash_func.

Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Netanel Belgazal <netanel@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:14:47 -04:00
Sameeh Jubran
78cb421d18 net: ena: improve latency by disabling adaptive interrupt moderation by default
Adaptive interrupt moderation was erroneously enabled by default
in the driver.

In case the device supports adaptive interrupt moderation it will
be automatically used, which may potentially increase latency.

The adaptive moderation can be enabled from ethtool command in
case the feature is supported by the device.

Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Guy Tzalik <gtzalik@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:14:47 -04:00
Sameeh Jubran
9a27de0c6b net: ena: fix return value of ena_com_config_llq_info()
ena_com_config_llq_info() returns 0 even if ena_com_set_llq() fails.
Return the failure code of ena_com_set_llq() in case it fails.

fixes: 689b2bdaaa ("net: ena: add functions for handling Low Latency Queues in ena_com")

Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:14:46 -04:00
Sameeh Jubran
d3cfe7ddbc net: ena: fix incorrect test of supported hash function
ena_com_set_hash_function() tests if a hash function is supported
by the device before setting it.
The test returns the opposite result than needed.
Reverse the condition to return the correct value.
Also use the BIT macro instead of inline shift.

Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:14:46 -04:00
Sameeh Jubran
b287cdbd1c net: ena: fix: Free napi resources when ena_up() fails
ena_up() calls ena_init_napi() but does not call ena_del_napi() in
case of failure. This causes a segmentation fault upon rmmod when
netif_napi_del() is called. Fix this bug by calling ena_del_napi()
before returning error from ena_up().

Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:14:46 -04:00
Sameeh Jubran
8ee8ee7fe8 net: ena: fix: set freed objects to NULL to avoid failing future allocations
In some cases when a queue related allocation fails, successful past
allocations are freed but the pointer that pointed to them is not
set to NULL. This is a problem for 2 reasons:
1. This is generally a bad practice since this pointer might be
accidentally accessed in the future.
2. Future allocations using the same pointer check if the pointer
is NULL and fail if it is not.

Fixed this by setting such pointers to NULL in the allocation of
queue related objects.

Also refactored the code of ena_setup_tx_resources() to goto-style
error handling to avoid code duplication of resource freeing.

Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:14:46 -04:00
Sameeh Jubran
3c6eeff295 net: ena: fix swapped parameters when calling ena_com_indirect_table_fill_entry
second parameter should be the index of the table rather than the value.

Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Saeed Bshara <saeedb@amazon.com>
Signed-off-by: Sameeh Jubran <sameehj@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:14:46 -04:00
Gustavo A. R. Silva
70bb13a5ff wimax/i2400m: use struct_size() helper
Make use of the struct_size() helper instead of an open-coded version
in order to avoid any potential type mistakes, in particular in the
context in which this code is being used.

So, replace code of the following form:

sizeof(*tx_msg) + le16_to_cpu(tx_msg->num_pls) * sizeof(tx_msg->pld[0]);

with:

struct_size(tx_msg, pld, le16_to_cpu(tx_msg->num_pls));

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:04:31 -04:00
David S. Miller
504159c383 Merge branch 'net-hns3-enhance-capabilities-for-fibre-port'
Jian Shen says:

====================
net: hns3: enhance capabilities for fibre port

This patchset enhances more capabilities for fibre port,
include multipe media type identification, autoneg,
change port speed and FEC encoding.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:02:41 -04:00
Jian Shen
7e6ec9148a net: hns3: add support for FEC encoding control
This patch adds support for FEC encoding control, user can change
FEC mode by command ethtool --set-fec, and get FEC mode by command
ethtool --show-fec. The fec capability is changed follow the port
speed. If autoneg on, the user configure fec mode will be overwritten
by autoneg result.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:02:41 -04:00
Jian Shen
22f48e24a2 net: hns3: add autoneg and change speed support for fibre port
Previously, our driver only supports phydev to autoneg or change
port speed. This patch adds support for fibre port, driver gets
media speed capability and autoneg capability from firmware. If
the media supports multiple speeds, user can change port speed
with command "ethtool -s <devname> speed xxxx autoneg off duplex
full". If autoneg on, the user configuration may be overwritten
by the autoneg result.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:02:41 -04:00
Jian Shen
88d10bd6f7 net: hns3: add support for multiple media type
Previously, we can only identify copper and fiber type, the
supported link modes of port information are always showing
SR type. This patch adds support for multiple media types,
include SR, LR CR, KR. Driver needs to query the media type
from firmware periodicly, and updates the port information.

The new port information looks like this:
Settings for eth0:
        Supported ports: [ FIBRE ]
        Supported link modes:   25000baseCR/Full
                                25000baseSR/Full
                                1000baseX/Full
                                10000baseCR/Full
                                10000baseSR/Full
                                10000baseLR/Full
        Supported pause frame use: Symmetric
        Supports auto-negotiation: No
        Supported FEC modes: None BaseR
        Advertised link modes:  Not reported
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Advertised FEC modes: Not reported
        Speed: 10000Mb/s
        Duplex: Full
        Port: FIBRE
        PHYAD: 0
        Transceiver: internal
        Auto-negotiation: off
        Current message level: 0x00000036 (54)
                               probe link ifdown ifup
        Link detected: yes

In order to be compatible with old firmware which only support
sfp speed, we remained using the same query command, and kept
the former logic.

Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-04 00:02:40 -04:00
Guenter Roeck
e28441e2ea usbnet: ipheth: Remove unnecessary NULL pointer check
ipheth_carrier_set() is called from two locations. In
ipheth_carrier_check_work(), its parameter 'dev' is set with
container_of(work, ...) and can not be NULL. In ipheth_open(),
dev is extracted from netdev_priv(net) and dereferenced before
the call to ipheth_carrier_set(). The NULL pointer check of dev
in ipheth_carrier_set() is therefore unnecessary and can be removed.

Cc: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03 23:59:31 -04:00
Andrew Lunn
a27415decd net: dsa: mv88e6xxx: Pass interrupt number in platform data
Allow an interrupt number to be passed in the platform data. The
driver will then use it if not zero, otherwise it will poll for
interrupts.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03 23:55:47 -04:00
David S. Miller
3b3600fffb Merge branch 'mv88e6xxx-Disable-ports-to-save-power'
Andrew Lunn says:

====================
mv88e6xxx: Disable ports to save power

Save some power by disabling ports. The first patch fully disables a
port when it is runtime disabled. The second disables any ports which
are not used at all.

Depending on configuration strapping, this can lower the temperature
of an idle switch a few degrees.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03 23:53:06 -04:00
Andrew Lunn
100a9b9d75 net: dsa :mv88e6xxx: Disable unused ports
If the NO_CPU strap is set, the switch starts in 'dumb hub' mode, with
all ports enable. Ports which are then actively used are reconfigured
as required when the driver starts. However unused ports are left
alone. Change this to disable them, and turn off any SERDES
interface. This could save some power and so reduce the temperature a
bit.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03 23:53:06 -04:00
Andrew Lunn
4a0eb731d6 net: dsa: mv88e6xxx: Set STP disable state in port_disable
When requested to disable a port, set the port STP state to disabled.
This fully disables the port and should save some power.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03 23:53:06 -04:00
Haiyang Zhang
93aa4792c3 hv_netvsc: fix race that may miss tx queue wakeup
When the ring buffer is almost full due to RX completion messages, a
TX packet may reach the "low watermark" and cause the queue stopped.
If the TX completion arrives earlier than queue stopping, the wakeup
may be missed.

This patch moves the check for the last pending packet to cover both
EAGAIN and success cases, so the queue will be reliably waked up when
necessary.

Reported-and-tested-by: Stephan Klein <stephan.klein@wegfinder.at>
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03 23:50:25 -04:00
David S. Miller
2ce1aef9cd Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2019-05-03

This series contains updates to the i40e driver only.

Carolyn changes the driver behavior to now disable the VF after one MDD
event instead of allowing a couple of MDD events before doing the reset.

Aleksandr changes the driver to only report an error when a VF tries to
remove VLAN when a port VLAN is configured, unless it is VLAN 0.  Also
extends the LLDP support to be able to keep the current LLDP state
persistent across a power cycle.

Maciej fixes the checksum calculation due to firmware changes, which
requires the driver to perform a double shadow RAM dump in some cases.

Adam adds advertising support for 40GBase_LR4, 40GBase_CR4 and fibre in
the driver.

Jake cleans up a check that is not needed and was producing a warning in
GCC 8.

Harshitha fixes a misleading message by ensuring that a success message
is only printed on the host side when the promiscuous mode change has
been successful.

Stefan Assmann adds the vendor id and device id to the dmesg log entry
during probe to help with bug reports when lspci output may not be
available.

Alice and Piotr add recovery mode support in the i40e driver, which is
needed for migrating from a structured to a flat firmware image.

v2: Removed patch 1 "i40e: replace switch-statement to speed-up
    retpoline-enabled builds" from the series since it is no longer
    needed.  Also updated the last patch in the series that introduces
    recovery mode support, to include a more detailed patch description
    and removed code not intended for the upstream kernel.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-03 23:27:00 -04:00
Linus Torvalds
aa1be08f52 * PPC and ARM bugfixes from submaintainers
* Fix old Windows versions on AMD (recent regression)
 * Fix old Linux versions on processors without EPT
 * Fixes for LAPIC timer optimizations
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAlzMc18UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNE0ggAj4c9FVC5aFeiBAj1YIcDijT3UtmG
 AjhoESE61rZI3PkZ5vcj2GC8eS7sKxExpCrQLsB5rLCF+7X90+tW155BHTHGU0ey
 ZgfGj23vlbZpvwZ4B5ujQ/Lmpry76pmy8EYekQogPP/eJxOB3oMk06tjh1mfSdIn
 D4Gj8jvYBB2ygAfmW91+YLLZos56id0N+Hyn/s95w4I1o6hKlkdpTOURAJKSGTb1
 2t0+XADUt4ZwPM6+2X/eOBMGpeZP0/eR7H3kdyPy3ydm0sFjMiAAs0NbNp3eblB6
 oqnytnGUPt8EEoq+wdZahLTbgJst2Ds++XAvVdBZED7zwGaBSETfg03eCg==
 =YP4M
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM fixes from Paolo Bonzini:

 - PPC and ARM bugfixes from submaintainers

 - Fix old Windows versions on AMD (recent regression)

 - Fix old Linux versions on processors without EPT

 - Fixes for LAPIC timer optimizations

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
  KVM: nVMX: Fix size checks in vmx_set_nested_state
  KVM: selftests: make hyperv_cpuid test pass on AMD
  KVM: lapic: Check for in-kernel LAPIC before deferencing apic pointer
  KVM: fix KVM_CLEAR_DIRTY_LOG for memory slots of unaligned size
  x86/kvm/mmu: reset MMU context when 32-bit guest switches PAE
  KVM: x86: Whitelist port 0x7e for pre-incrementing %rip
  Documentation: kvm: fix dirty log ioctl arch lists
  KVM: VMX: Move RSB stuffing to before the first RET after VM-Exit
  KVM: arm/arm64: Don't emulate virtual timers on userspace ioctls
  kvm: arm: Skip stage2 huge mappings for unaligned ipa backed by THP
  KVM: arm/arm64: Ensure vcpu target is unset on reset failure
  KVM: lapic: Convert guest TSC to host time domain if necessary
  KVM: lapic: Allow user to disable adaptive tuning of timer advancement
  KVM: lapic: Track lapic timer advance per vCPU
  KVM: lapic: Disable timer advancement if adaptive tuning goes haywire
  x86: kvm: hyper-v: deal with buggy TLB flush requests from WS2012
  KVM: x86: Consider LAPIC TSC-Deadline timer expired if deadline too short
  KVM: PPC: Book3S: Protect memslots while validating user address
  KVM: PPC: Book3S HV: Perserve PSSCR FAKE_SUSPEND bit on guest exit
  KVM: arm/arm64: vgic-v3: Retire pending interrupts on disabling LPIs
  ...
2019-05-03 16:49:46 -07:00
Serge Semin
2f5bd0367e
mips: Perform early low memory test
memblock subsystem provides a method to optionally test the passed
memory region in case if it was requested via special kernel boot
argument. Lets add the function at the bottom of the arch_mem_init()
method. Testing at this point in the boot sequence should be safe since all
critical areas are now reserved and a minimum of allocations have been
done.

Reviewed-by: Matt Redfearn <matt.redfearn@mips.com>
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Serge Semin <Sergey.Semin@t-platforms.ru>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
2019-05-03 15:26:10 -07:00
Serge Semin
30c8f4e411
mips: Dump memblock regions for debugging
It is useful to have the whole memblock memory space printed to console
when basic memlock initializations are done. It can be performed by
ready-to-use method memblock_dump_all(), which prints the available
and reserved memory spaces if memblock=debug kernel parameter is
specified. Lets call it at the very end of arch_mem_init() function,
when all memblock memory and reserved regions are defined, but before
any serious allocation is performed.

Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Paul Burton <paul.burton@mips.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: Stefan Agner <stefan@agner.ch>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Serge Semin <Sergey.Semin@t-platforms.ru>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
2019-05-03 15:24:12 -07:00
John David Anglin
11c03dc85f parisc: Update huge TLB page support to use per-pagetable spinlock
This patch updates the parisc huge TLB page support to use per-pagetable spinlocks.

This patch requires Mikulas' per-pagetable spinlock patch and the revised TLB
serialization patch from Helge and myself.  With Mikulas' patch, we need to use
the per-pagetable spinlock for page table updates.  The TLB lock is only used
to serialize TLB flushes on machines with the Merced bus.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:41 +02:00
Mikulas Patocka
b37d1c1898 parisc: Use per-pagetable spinlock
PA-RISC uses a global spinlock to protect pagetable updates in the TLB
fault handlers. When multiple cores are taking TLB faults simultaneously,
the cache line containing the spinlock becomes a bottleneck.

This patch embeds the spinlock in the top level page directory, so that
every process has its own lock. It improves performance by 30% when
doing parallel compilations.

At least on the N class systems, only one PxTLB inter processor
broadcast can be active at any one time on the Merced bus. If a Merced
bus is found, this patch serializes the TLB flushes with the
pa_tlb_flush_lock spinlock.

v1: Initial patch by Mikulas
v2: Added Merced detection by Helge
v3: Revised TLB serialization by Dave & Helge

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:41 +02:00
Helge Deller
d19a12906e parisc: Allow live-patching of __meminit functions
When making the text sections writeable with set_kernel_text_rw(1),
include all text sections including those in the __init section.
Otherwise functions marked with __meminit will stay read-only.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>	# 4.20+
2019-05-03 23:47:40 +02:00
Helge Deller
2d94a832e2 parisc: Add memory barrier to asm pdc and sync instructions
Add compiler memory barriers to ensure the compiler doesn't reorder memory
operations around these instructions.

Cc: stable@vger.kernel.org # v4.20+
Fixes: 3847dab774 ("parisc: Add alternative coding infrastructure")
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:40 +02:00
John David Anglin
44224bdb99 parisc: Add memory clobber to TLB purges
The pdtlb and pitlb instructions are strongly ordered. The asms invoking
these instructions should be compiler memory barriers to ensure the
compiler doesn't reorder memory operations around these instructions.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
CC: stable@vger.kernel.org # v4.20+
Fixes: 3847dab774 ("parisc: Add alternative coding infrastructure")
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:40 +02:00
John David Anglin
9e5c602186 parisc: Use ldcw instruction for SMP spinlock release barrier
There are only a couple of instructions that can function as a memory
barrier on parisc.  Currently, we use the sync instruction as a memory
barrier when releasing a spinlock.  However, the ldcw instruction is a
better barrier when we have a handy memory location since it operates in
the cache on coherent machines.

This patch updates the spinlock release code to use ldcw.  I also
changed the "stw,ma" instructions to "stw" instructions as it is not an
adequate barrier.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:40 +02:00
John David Anglin
6c63ef8001 parisc: Remove lock code to serialize TLB operations in pacache.S
TLB operations only need to be serialized on machines with the Merced
(Stretch) bus. The only machines in this category are L and N class, and
they require a 64-bit PA 2.0 kernel. On these machines, we use local TLB
purges in the tmpalias routines.
We don't need to serialize TLB purges on all other machines. Thus, the
lock/unlock code can be removed when CONFIG_PA20 is not defined.
Further, when CONFIG_PA20 is not defined, alternative patching converts
the TLB purges to local purges when PA 2.0 hardware has been detected.

Signed-off-by: John David Anglin <dave.anglin@bell.net>
Tested-By: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:40 +02:00
Helge Deller
dbdf076099 parisc: Switch from DISCONTIGMEM to SPARSEMEM
The commit 1c30844d2d ("mm: reclaim small amounts of memory when an
external fragmentation event occurs") breaks memory management on a
parisc c8000 workstation with this memory layout:

	0) Start 0x0000000000000000 End 0x000000003fffffff Size   1024 MB
	1) Start 0x0000000100000000 End 0x00000001bfdfffff Size   3070 MB
	2) Start 0x0000004040000000 End 0x00000040ffffffff Size   3072 MB

With the patch 1c30844d2d, the kernel will incorrectly reclaim the
first zone when it fills up, ignoring the fact that there are two
completely free zones. Basiscally, it limits cache size to 1GiB.

The parisc kernel is currently using the DISCONTIGMEM implementation,
but isn't NUMA. Avoid this issue or strange work-arounds by switching to
the more commonly used SPARSEMEM implementation.

Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Fixes: 1c30844d2d ("mm: reclaim small amounts of memory when an external fragmentation event occurs")
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:40 +02:00
Sven Schnelle
6b1370ae39 parisc: enable wide mode early
The idle task might have been allocated above 4GB. With the current code
we cannot access that memory because the CPU is still running in narrow
mode.
This was found on a J5000 machine and the patch is required to enable
SPARSEMEM on that machine.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:40 +02:00
Sven Schnelle
75da60ff53 parisc: update feature lists
Update lists to reflect that we have now KGDB and kretprobes
support.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:40 +02:00
Helge Deller
0e4db23e12 parisc: Show n/a if product number not available
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:39 +02:00
Sven Schnelle
ea5a8c620f parisc: remove unused flags parameter in __patch_text()
It's not used by patch_map()/patch_unmap(), so lets remove
it.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:39 +02:00
Sven Schnelle
376e5fd7ec doc: update kprobes supported architecture list
Now that kprobes and kretprobes are implemented, update the list in
Documentation to reflect that.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:39 +02:00
Sven Schnelle
e0b59b7b63 parisc: Implement kretprobes
Implement kretprobes on parisc, parts stolen from powerpc.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:39 +02:00
Sven Schnelle
1253d18d2d parisc: remove kprobes.h from generic-y
We're providing our own version now.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:39 +02:00
Sven Schnelle
8858ac8e9e parisc: Implement kprobes
Implement kprobes support for PA-RISC.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:39 +02:00
Sven Schnelle
ea1afe339a parisc: add functions required by KPROBE_EVENTS
implement regs_get_register(), regs_get_kernel_stack_nth() and
regs_within_kernel_stack()

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:39 +02:00
Helge Deller
82d96bf68e parisc: PA-Linux requires at least 32 MB RAM
Even a 32-bit kernel requires at least 27 MB to decompress itself, so
halt the system with a message if the system has less memory than 32 MB.

Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:39 +02:00
Helge Deller
b438749044 parisc: Skip registering LED when running in QEMU
No need to spend CPU cycles when we run on QEMU.

Signed-off-by: Helge Deller <deller@gmx.de>
CC: stable@vger.kernel.org # v4.9+
2019-05-03 23:47:39 +02:00
Helge Deller
f30bfa6d29 parisc: Tune LASI LAN for QEMU
Do not loose cycles when we run on QEMU, and fix one trivial typo.

Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:38 +02:00
Helge Deller
3e1120f4b5 parisc: Export running_on_qemu symbol for modules
Signed-off-by: Helge Deller <deller@gmx.de>
CC: stable@vger.kernel.org # v4.9+
2019-05-03 23:47:38 +02:00
Sven Schnelle
eacbfce19d parisc: add KGDB support
This patch add KGDB support to PA-RISC. It also implements
single-stepping utilizing the recovery counter.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:38 +02:00
Sven Schnelle
620a53d522 parisc: add parisc code patching
Instead of re-mapping the whole kernel text with RWX rights
add a patch_text() which can be used to replace instructions
in the kernel .text section. Based on the ARM implementation.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:38 +02:00
Sven Schnelle
ccfbc68d41 parisc: add set_fixmap()/clear_fixmap()
These functions will be used for adding code patching
functions later.

Signed-off-by: Sven Schnelle <svens@stackframe.org>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:38 +02:00