Commit graph

982,081 commits

Author SHA1 Message Date
Alexandre Ghiti
17d9822d4b parisc: Consider stack randomization for mmap base only when necessary
Do not offset mmap base address because of stack randomization if
current task does not want randomization.

Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Helge Deller <deller@gmx.de>
2019-05-03 23:47:38 +02:00
Alice Michael
4ff0ee1af0 i40e: Introduce recovery mode support
This patch introduces "recovery mode" to the i40e driver. It is
part of a new Any2Any idea of upgrading the firmware. In this
approach, it is required for the driver to have support for
"transition firmware", that is used for migrating from structured
to flat firmware image. In this new, very basic mode, i40e driver
must be able to handle particular IOCTL calls from the NVM Update
Tool and run a small set of AQ commands.

These additional AQ commands are part of the interface used by
the NVMUpdate tool.  The NVMUpdate tool contains all of the
necessary logic to reference these new AQ commands.  The end user
experience remains the same, they are using the NVMUpdate tool to
update the NVM contents.

Signed-off-by: Alice Michael <alice.michael@intel.com>
Signed-off-by: Piotr Marczak <piotr.marczak@intel.com>
Tested-by: Don Buchholz <donald.buchholz@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03 14:34:01 -07:00
Stefan Assmann
a121644c14 i40e: print PCI vendor and device ID during probe
Printing each devices PCI vendor and device ID has the advantage of
easily revealing what hardware we're dealing with exactly. It's no
longer necessary to match the PCI bus information to the lspci output.

Helps with bug reports where no lspci output is available.

Output before
i40e 0000:08:00.0: fw 6.1.49420 api 1.7 nvm 6.80 0x80003c64 1.2007.0
and after
i40e 0000:08:00.0: fw 6.1.49420 api 1.7 nvm 6.80 0x80003c64 1.2007.0 [8086:1572] [8086:0004]

Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03 14:31:51 -07:00
Harshitha Ramamurthy
1e84682752 i40e: fix misleading message about promisc setting on un-trusted VF
A refactor of the i40e_vc_config_promiscuous_mode_msg function moved
the check for un-trusted VF into another function. We have to lie to
an un-trusted VF that its request to set promiscuous mode is
successful even when it is not because we don't want the VF to find
out its trust status this way. With the refactor, we were running into
a case where even though we were not setting promiscuous mode for an
un-trusted VF, we still printed a misleading message that it was
successful.

This patch fixes that by ensuring that a success message is printed
on the host side only when the promiscuous mode change has been
successful.

Signed-off-by: Harshitha Ramamurthy <harshitha.ramamurthy@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03 14:31:48 -07:00
Alice Michael
d1fc90a93d i40e: update version number
Just bumping the version number appropriately.

Signed-off-by: Alice Michael <alice.michael@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03 14:31:43 -07:00
Jacob Keller
a01e5f222f i40e: remove out-of-range comparisons in i40e_validate_cloud_filter
The function i40e_validate_cloud_filter checks that the destination and
source port numbers are valid by attempting to ensure that the number is
non-zero and no larger than 0xFFFF. However, the types for the dst_port
and src_port variable are __be16 which by definition cannot be larger
than 0xFFFF

Since these values cannot be larger than 2 bytes, the check to see if
they exceed 0xFFFF is meaningless.

One might consider these checks as some sort of defensive coding, in
case the type was later changed. However, these checks also byte-swap
the value before comparison using be16_to_cpu, which will truncate the
values to 16bits anyways. Additionally, changing the type would require
updating the opcodes to support new data layout of these virtchnl
commands.

Remove the check to silence the -Wtype-limits warning that was added to
GCC 8.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03 14:31:39 -07:00
Aleksandr Loktionov
c65e78f87f i40e: Further implementation of LLDP
This code implements driver code changes necessary for LLDP
Agent support. Modified i40e_aq_start_lldp() and
i40e_aq_stop_lldp() adding false parameter whether LLDP state
should be persistent across power cycles.

Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03 14:31:34 -07:00
Adam Ludkiewicz
b3212f355d i40e: Report advertised link modes on 40GBase_LR4, CR4 and fibre
Add assignments for advertising 40GBase_LR4, 40GBase_CR4 and fibre

Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03 14:31:29 -07:00
Maciej Paczkowski
226436dc8a i40e: ShadowRAM checksum calculation change
Due to changes in FW the SW is required to perform double SR dump in
some cases.

Implementation adds two new steps to update nvm checksum function:
* recalculate checksum and check if checksum in NVM is correct
* if checksum in NVM is not correct then update it again

Signed-off-by: Maciej Paczkowski <maciej.paczkowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03 14:31:25 -07:00
Aleksandr Loktionov
5a189f1550 i40e: remove error msg when vf with port vlan tries to remove vlan 0
VF's attempt to delete vlan 0 when a port vlan is configured is harmless
in this case pf driver just does nothing.  If vf will try to remove
other vlans when a port vlan is configured it will still produce error
as before.

Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03 14:31:21 -07:00
Carolyn Wyborny
a1df906c5b i40e: change behavior on PF in response to MDD event
TX MDD events reported on the PF are the result of the
PF misconfiguring a descriptor and not because of "bad actions"
by anything else.  No need to reset now because if it
results in a Tx hang, the Tx hang check will take care of it.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03 14:31:16 -07:00
Carolyn Wyborny
a7da7f1626 i40e: Fix for allowing too many MDD events on VF
This patch changes the driver behavior when detecting a VF MDD event.
It now disables the VF after one event, which indicates a hw detected
problem in the VF.  Before this change, the PF would allow a couple of
events before doing the reset.

Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-03 14:31:05 -07:00
Robin Murphy
b208146b0c drm/panfrost: Show stored feature registers
Re-reading the feature registers for the sake of displaying the raw
values seems pointless, and in fact showing the copies that we've
already read and stored is arguably more useful in terms of giving
exposure to any potential bugs in that part of the process.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ce5e414adb008baeed9e2ceb9c88f28d5c74ea42.1556195258.git.robin.murphy@arm.com
2019-05-03 15:36:23 -05:00
Robin Murphy
5450f3615c drm/panfrost: Don't scream about deferred probe
Probe deferral is far from "fatal".

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/b6ff1f18ac0612f29fd2e3336d6663b7e02db572.1556195258.git.robin.murphy@arm.com
2019-05-03 15:36:14 -05:00
Robin Murphy
f4a3c6a44b drm/panfrost: Disable PM on probe failure
Make sure to disable runtime PM again if probe fails after we've enabled
it. Otherwise, any subsequent attempt to re-probe starts triggering
"Unbalanced pm_runtime_enable!" assertions from the driver core.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/2487391e7646cabbc52e9b4c20182e39d3f61859.1556195258.git.robin.murphy@arm.com
2019-05-03 15:36:02 -05:00
Robin Murphy
d9b631f0a0 drm/panfrost: Set DMA masks earlier
The DMA masks need to be set correctly before any DMA API activity kicks
off, and the current point in panfrost_probe() is way too late in that
regard. since panfrost_mmu_init() has already set up a live address
space and DMA-mapped MMU pagetables. We can't set masks until we've
queried the appropriate value from MMU_FEATURES, but as soon as
reasonably possible after that should suffice.

Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/64361b929a5c61d2ab9580262ecb3d369164cfcb.1556195258.git.robin.murphy@arm.com
2019-05-03 15:35:54 -05:00
Tomeu Vizoso
6ff408e6dc drm/panfrost: Add sanity checks to submit IOCTL
So userspace can get feedback on any error conditions, instead of going
ahead and things breaking later.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190424131355.62817-1-tomeu.vizoso@collabora.com
2019-05-03 15:34:10 -05:00
Iker Perez del Palomar Sustatxa
39abe9d88b hwmon: (lm75) Add support for TMP75B
The TMP75B has a different control register, supports 12-bit
resolution and the default conversion rate is 37 Hz.

Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-05-03 13:16:18 -07:00
Andrey Smirnov
9a2688e426 power: supply: Add driver for Microchip UCS1002
Add driver for Microchip UCS1002 Programmable USB Port Power
Controller with Charger Emulation. The driver exposed a power supply
device to control/monitor various parameter of the device as well as a
regulator to allow controlling VBUS line.

Signed-off-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-kernel@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-05-03 22:16:08 +02:00
Andrey Smirnov
7df8f2d00d dt-bindings: power: supply: Add bindings for Microchip UCS1002
Add bindings for Microchip UCS1002 Programmable USB Port Power
Controller with Charger Emulation.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Rob Herring <robh+dt@kernel.org>
Cc: Enric Balletbo Serra <enric.balletbo@collabora.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-kernel@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-05-03 22:16:04 +02:00
Andrey Smirnov
e3e83cc601 power: supply: core: Add POWER_SUPPLY_HEALTH_OVERCURRENT constant
Add POWER_SUPPLY_HEALTH_OVERCURRENT constant in order to allow
singalling overcurrent condition via power supply health information.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: Enric Balletbo Serra <enric.balletbo@collabora.com>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-kernel@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2019-05-03 22:15:51 +02:00
Iker Perez del Palomar Sustatxa
be889be778 dt-bindings: hwmon: Add tmp75b to lm75.txt
Update the LM75's devicetree definition to allow Texas Instruments
TMP75B be probed.

Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@codethink.co.uk>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-05-03 13:13:15 -07:00
Sean Paul
ae677a6710 Tagging commit at head of panfrost fixes (+ rockchip fix) that need to go into
-misc-next-fixes.
 
 Signed-off-by: Sean Paul <seanpaul@chromium.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEfxcpfMSgdnQMs+QqlvcN/ahKBwoFAlzMmCIACgkQlvcN/ahK
 BwqHEwf+LNISngz8pjHWljiaOQGfMHhE2LHR55C4ncF8bFUD82k7zVwxEm0Ls7b9
 xnmoGGTnG46viUoZDcZsWcy/BkEYbEQ7aTsaexDJ1w9SeMDh0OKrlPlsSJjKXDGL
 mUM8zVaRnKuFCwTmh3O0GPLV2iNyTwjPiIXBwcif2/ZLWpCrzwZqv4bgiiSo+eOD
 +12qL9h+MdlTWXvLCroMe44o2QNnKukkkGUAaT/oQloJPhe8hzEU9WloY+5VgGaH
 IZ0mPcDz5QjU6OflmHrH6XSpcp5UdRsgks7ws9+zdACiPeS/XNgpnqPSIi/EXGtK
 vgIkSe0SAFH87iRihjN+5bHEhK9fug==
 =c8P8
 -----END PGP SIGNATURE-----

Merge panfrost-fixes into drm-misc-next-fixes

Merging some panfrost fixes as well as one rockchip fix that _just_
missed feature freeze.

Signed-off-by: Sean Paul <seanpaul@chromium.org>
2019-05-03 15:39:37 -04:00
Petr Mladek
f68d67cf2f livepatch: Remove duplicated code for early initialization
kobject_init() call added one more operation that has to be
done when doing the early initialization of both static and
dynamic livepatch structures.

It would have been easier when the early initialization code
was not duplicated. Let's deduplicate it for future generations
of livepatching hackers.

The patch does not change the existing behavior.

Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-05-03 21:11:23 +02:00
Petr Mladek
4d141ab341 livepatch: Remove custom kobject state handling
kobject_init() always succeeds and sets the reference count to 1.
It allows to always free the structures via kobject_put() and
the related release callback.

Note that the custom kobject state handling was used only
because we did not know that kobject_put() can and actually
should get called even when kobject_init_and_add() fails.

The patch should not change the existing behavior.

Suggested-by: "Tobin C. Harding" <tobin@kernel.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2019-05-03 21:11:22 +02:00
Linus Torvalds
82463436a7 Merge branch 'i2c/for-current-fixed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
 "I2C driver bugfixes and a MAINTAINERS update for you"

* 'i2c/for-current-fixed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: Prevent runtime suspend of adapter when Host Notify is required
  i2c: synquacer: fix enumeration of slave devices
  MAINTAINERS: friendly takeover of i2c-gpio driver
  i2c: designware: ratelimit 'transfer when suspended' errors
  i2c: imx: correct the method of getting private data in notifier_call
2019-05-03 11:42:01 -07:00
Martin Brandenburg
33713cd09c orangefs: truncate before updating size
Otherwise we race with orangefs_writepage/orangefs_writepages
which and does not expect i_size < page_offset.

Fixes xfstests generic/129.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:39:10 -04:00
Mike Marshall
dd59a6475c orangefs: copy Orangefs-sized blocks into the pagecache if possible.
->readpage looks in file->private_data to try and find out how the
userspace program set "count" in read(2) or with "dd bs=" or whatever.

->readpage uses "count" and inode->i_size to calculate how much
data Orangefs should deposit in the Orangefs shared buffer, and
remembers which slot the data is in.

After copying data from the Orangefs shared buffer slot into
"the page", readpage tries to increment through the pagecache index
and fill as many pages as it can from the extra data in the shared
buffer. Hopefully these extra pages will soon be needed by the vfs,
and they'll be in the pagecache already.

Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
2019-05-03 14:32:39 -04:00
Mike Marshall
4077a0f25b orangefs: pass slot index back to readpage.
When userspace deposits more than a page of data into the shared buffer,
we'll need to know which slot it is in when we get back to readpage
so that we can try to use the extra data to fill some extra pages.

Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
2019-05-03 14:32:39 -04:00
Mike Marshall
c2549f8c7a orangefs: remember count when reading.
Orangefs wins when it can do IO on large (up to four meg) blocks at a time,
and looses when it has to do tiny "small io" reads and writes. Accessing
Orangefs through the pagecache with the kernel module helps with small io,
both reading and writing, a great deal. Readpage generally tries to fetch a
page (four k) at a time. We'll let users use "count" (as in read(2) or
pread(2) for example) as a knob to control how much data they get from
Orangefs at a time and we'll try to use the data to fill extra
pagecache pages when we get to ->readpage, hopefully resulting in
fewer calls to readpage and Orangefs userspace.

We need a way to remember how they set count so that we can still have
it available when we get to ->readpage.

 - We'll use file->private_data to keep track of "count".
   We'll wrap generic_file_open with orangefs_file_open and
   initialize private_data to NULL there.

 - In ->read_iter we have access to both "count" and file, so
   we'll kmalloc some space onto file->private_data and store
   "count" there.

 - We'll kfree file->private_data each time we visit ->flush and
   reinitialize it to NULL.

Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
2019-05-03 14:32:39 -04:00
Martin Brandenburg
8f04e1be78 orangefs: add orangefs_revalidate_mapping
This is modeled after NFS, except our method is different.  We use a
simple timer to determine whether to invalidate the page cache.  This
is bound to perform.

This addes a sysfs parameter cache_timeout_msecs which controls the time
between page cache invalidations.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:39 -04:00
Martin Brandenburg
c472ebc255 orangefs: implement writepages
Go through pages and look for a consecutive writable region.  After
finding a number of consecutive writable pages or when finding that
the next page's dirty range is not contiguous and cannot be written
as one request, send the write to the server.

The number of pages is determined by the client-core's buffer size.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:39 -04:00
Martin Brandenburg
52e2d0a380 orangefs: write range tracking
Attach the actual range of bytes written to plus the responsible uid/gid
to each dirty page.  This information must be sent to the server when
the page is written out.

Now write_begin, page_mkwrite, and invalidatepage keep up with this
information.  There are several conditions where they must write out the
page immediately to store the new range.  Two non-contiguous ranges
cannot be stored on a single page.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
90fc07065a orangefs: avoid fsync service operation on flush
Without this, an fsync call is sent to the server even if no data
changed.  This resulted in a rather severe (50%) performance regression
under certain metadata-heavy workloads.

In the past, everything was direct IO.  Nothing happend on a close call.
An explicit fsync call would send an fsync request to the server which
in turn fsynced the underlying file.

Now there are cached writes.  Then fsync began writing out dirty pages
in addition to making an fsync request to the server, and close began
calling fsync.

With this commit, close only writes out dirty pages, and does not make
the fsync request.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
8a88bbce6f orangefs: skip inode writeout if nothing to write
Would happen if an inode is dirty but whatever happened is not something
that can be written out to OrangeFS.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
3e9dfc6e1e orangefs: move do_readv_writev to direct_IO
direct_IO was the only caller and all direct_IO did was call it,
so there's no use in having the code spread out into so many functions.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
43f3457604 orangefs: do not return successful read when the client-core disappeared
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
85ac799cf9 orangefs: implement writepage
Now orangefs_inode_getattr fills from cache if an inode has dirty pages.

also if attr_valid and dirty pages and !flags, we spin on inode writeback
before returning if pages still dirty after: should it be other way

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
c453dcfc79 orangefs: migrate to generic_file_read_iter
Remove orangefs_inode_read.  It was used by readpage.  Calling
wait_for_direct_io directly serves the purpose just as well.  There is
now no check of the bufmap size in the readpage path.  There are already
other places the bufmap size is assumed to be greater than PAGE_SIZE.

Important to call truncate_inode_pages now in the write path so a
subsequent read sees the new data.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
0dcac0f781 orangefs: service ops done for writeback are not killable
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
a68d9c606a orangefs: remove orangefs_readpages
It's a copy of the loop which would run in read_pages from
mm/readahead.c.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
afd9fb2a31 orangefs: reorganize setattr functions to track attribute changes
OrangeFS accepts a mask indicating which attributes were changed.  The
kernel must not set any bits except those that were actually changed.
The kernel must set the uid/gid of the request to the actual uid/gid
responsible for the change.

Code path for notify_change initiated setattrs is

orangefs_setattr(dentry, iattr)
-> __orangefs_setattr(inode, iattr)

In kernel changes are initiated by calling __orangefs_setattr.

Code path for writeback is

orangefs_write_inode
-> orangefs_inode_setattr

attr_valid and attr_uid and attr_gid change together under i_lock.
I_DIRTY changes separately.

__orangefs_setattr
	lock
	if needs to be cleaned first, unlock and retry
	set attr_valid
	copy data in
	unlock
	mark_inode_dirty

orangefs_inode_setattr
	lock
	copy attributes out
	unlock
	clear getattr_time
	# __writeback_single_inode clears dirty

orangefs_inode_getattr
	# possible to get here with attr_valid set and not dirty
	lock
	if getattr_time ok or attr_valid set, unlock and return
	unlock
	do server operation
	# another thread may getattr or setattr, so check for that
	lock
	if getattr_time ok or attr_valid, unlock and return
	else, copy in
	update getattr_time
	unlock

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
df2d7337b5 orangefs: let setattr write to cached inode
This is a fairly big change, but ultimately it's not a lot of code.

Implement write_inode and then avoid the call to orangefs_inode_setattr
within orangefs_setattr.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
f2d34c738c orangefs: set up and use backing_dev_info
Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
5e4f606e26 orangefs: hold i_lock during inode_getattr
This should be a no-op now.  When inode writeback works, this will
prevent a getattr from overwriting inode data while an inode is
transitioning to dirty.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
5e7f1d4338 orangefs: update attributes rather than relying on server
This should be a no-op now, but once inode writeback works, it'll be
necessary to have the correct attribute in the dirty inode.

Previously the attribute fetch timeout was marked invalid and the server
provided the updated attribute.  When the inode is dirty, the server
cannot be consulted since it does not yet know the pending setattr.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
8b60785c1d orangefs: simplify orangefs_inode_getattr interface
No need to store the received mask.  It is either STATX_BASIC_STATS or
STATX_BASIC_STATS & ~STATX_SIZE.  If STATX_SIZE is requested, the cache
is bypassed anyway, so the cached mask is unnecessary to decide whether
to do a real getattr.

This is a change.  Previously a getattr would want size and use the
cached size.  All of the in-kernel callers that wanted size did not want
a cached size.  Now a getattr cannot use the cached size if it wants
size at all.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:38 -04:00
Martin Brandenburg
66d5477d70 orangefs: do not invalidate attributes on inode create
When an inode is created, we fetch attributes from the server.  There is
no need to turn around and invalidate them.

No need to initialize attributes after the getattr either.  Either it'll
be exactly the same, or it'll be something else and wrong.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:37 -04:00
Martin Brandenburg
fc2e2e9c43 orangefs: implement xattr cache
This uses the same timeout as the getattr cache.  This substantially
increases performance when writing files with smaller buffer sizes.

When writing, the size is (often) changed, which causes a call to
notify_change which calls security_inode_need_killpriv which needs a
getxattr.  Caching it reduces traffic to the server.

Signed-off-by: Martin Brandenburg <martin@omnibond.com>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
2019-05-03 14:32:37 -04:00
Nicholas Piggin
08ae95f4fd nohz_full: Allow the boot CPU to be nohz_full
Allow the boot CPU/CPU0 to be nohz_full. Have the boot CPU take the
do_timer duty during boot until a housekeeping CPU can take over.

This is supported when CONFIG_PM_SLEEP_SMP is not configured, or when
it is configured and the arch allows suspend on non-zero CPUs.

nohz_full has been trialed at a large supercomputer site and found to
significantly reduce jitter. In order to deploy it in production, they
need CPU0 to be nohz_full because their job control system requires
the application CPUs to start from 0, and the housekeeping CPUs are
placed higher. An equivalent job scheduling that uses CPU0 for
housekeeping could be achieved by modifying their system, but it is
preferable if nohz_full can support their environment without
modification.

Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lkml.kernel.org/r/20190411033448.20842-6-npiggin@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-05-03 19:42:58 +02:00