Commit graph

982,081 commits

Author SHA1 Message Date
Larry Finger
ddab2eee79 rtlwifi: Convert the wake_match variable to local
In five of the drivers, the contents of bits 29-31 of one of the RX
descriptors is used to set bits in a variable that is used to save the
wakeup condition for output in a debugging statement. The resulting
variable is not used anywhere else even though it is stored in a struct
and could be available in other routines. This variable is changed to be
local.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-13 14:15:45 +03:00
Larry Finger
0961d9874a rtlwifi: Fix duplicate tests of one of the RX descriptors
In drivers rtl8188ee, rtl8821ae, rtl8723be, and rtl8192ee, the reason
for a wake-up is returned in the fourth RX descriptor in bits 29-31. Due
to typographical errors, all but rtl8821ae test bit 31 twice and fail to
test bit 29.

This error causes no problems as the tests are only used to set bits in
the output of an optional debugging statement.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-13 14:15:44 +03:00
Colin Ian King
a927e8d8ab brcmfmac: fix leak of mypkt on error return path
Currently if the call to brcmf_sdiod_set_backplane_window fails then
error return path leaks mypkt. Fix this by returning by a new
error path labelled 'out' that calls brcmu_pkt_buf_free_skb to free
mypkt.  Also remove redundant check on err before calling
brcmf_sdiod_skbuff_write.

Addresses-Coverity: ("Resource Leak")
Fixes: a7c3aa1509 ("brcmfmac: Remove brcmf_sdiod_addrprep()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-13 14:07:09 +03:00
Ondrej Jirman
e3062e05e1 brcmfmac: Loading the correct firmware for brcm43456
SDIO based brcm43456 is currently misdetected as brcm43455 and the wrong
firmware name is used. Correct the detection and load the correct
firmware file. Chiprev for brcm43456 is "9".

Signed-off-by: Ondrej Jirman <megous@megous.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-13 14:04:44 +03:00
Gustavo A. R. Silva
0cf83903aa brcmfmac: Use struct_size() in kzalloc()
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:

struct foo {
    int stuff;
    struct boo entry[];
};

size = sizeof(struct foo) + count * sizeof(struct boo);
instance = kzalloc(size, GFP_KERNEL)

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kzalloc(struct_size(instance, entry, count), GFP_KERNEL)

Notice that, in this case, variable reqsz is not necessary,
hence it is removed.

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-04-13 13:58:36 +03:00
Kalle Valo
5f659c792a Second batch of patches intended for v5.2
* Work on the new debugging infra continues;
 * Fixes for the 22000 series;
 * Support for some new FW API changes;
 * Work on new hardware continues;
 * Some debugfs cleanups by Greg-KH;
 * General bugfixes;
 * Other cleanups;
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEF3LNfgb2BPWm68smoUecoho8xfoFAlykbPEACgkQoUecoho8
 xfocxA//XQGIwKM/kNj9idxhZ9ATbTqMx32h6IU5dZvI/8uNOdAT3e+irdqLnpJP
 aaQfqK/jfmIvQwZ6WUuCTGCQvoC64saJUEB7hxxHDSujYCMeHTdSHPxxmYwUb/4L
 glTJai9vAl+bAaaVLZukfE4/sTNVbTXDjFD2k7A6Nkb0FeHRLN0yz6Qzkn6wnpIs
 jlxNLk+w0xnPnEFXqJhp+LX2oyYbhd6iV08rWKs7HnZhyM+hVx9GL+5UwIjqLsdC
 6Ps0USMcx2zLgaijihGKRW7P2VT1iMM8vQxf4e87ovOHCFjA3xbWqlw2tWlD70kD
 +VMYLJYCSo2bZdX1wn8GV7Asfy3gE1Ut8ufQU5v1dOplDmMWvyg1j0+Pat/u/gs0
 VGjoqPFgPR5bPNB3yWHNdvXpR6+C4PF5udeBqPOxbM6spa7SnSqxIxPKiUYf4HAu
 6BBg+DRvHD9YNYOTRh9w+vblsOQ5EEOZxhP/m+vDmSFoUwaeS/yw/K0iFaJyu5re
 JOkrCYtB87gtq25gZIJWkhiO/H3x6fY0r0xmiBjdzNbC6z/3ogfNaHlRgzLNu6Mf
 UjGK7aEeqXG0iP6PA8xfKlD4OJ41hyIpLFBM80+lX010S1PNwMWWO64yu2Vsorpo
 qmb4unTdYkpRn6Ii3q1XkVhKs3AgIN/hS8MJ25AldDMXEDbfpwY=
 =qVj2
 -----END PGP SIGNATURE-----

Merge tag 'iwlwifi-next-for-kalle-2019-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next

Second batch of patches intended for v5.2

* Work on the new debugging infra continues;
* Fixes for the 22000 series;
* Support for some new FW API changes;
* Work on new hardware continues;
* Some debugfs cleanups by Greg-KH;
* General bugfixes;
* Other cleanups;
2019-04-13 13:45:03 +03:00
Takashi Iwai
e61ab9f017 ALSA: hda: Initialize ext-bus-specific fields in snd_hdac_bus_init(), too
Some fields in snd_hdac_bus are ext-bus specific, but they still
should be initialized in snd_hdac_bus_init() for consistency, at
least, for the ones that do need the explicit initialization like the
list head.

Also move the lock field to the more appropriate place and correct the
comment to reflect the recent change where it serves for both the
display power and the link management.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-13 10:10:26 +02:00
Takashi Iwai
99fff44fe3 Merge branch 'for-linus' into for-next
Back-merge the 5.1 devel branch for the further HD-audio development.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-13 10:09:46 +02:00
Takashi Iwai
183ab39eb0 ALSA: hda: Initialize power_state field properly
The recent commit 98081ca62c ("ALSA: hda - Record the current power
state before suspend/resume calls") made the HD-audio driver to store
the PM state in power_state field.  This forgot, however, the
initialization at power up.  Although the codec drivers usually don't
need to refer to this field in the normal operation, let's initialize
it properly for consistency.

Fixes: 98081ca62c ("ALSA: hda - Record the current power state before suspend/resume calls")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-04-13 10:04:49 +02:00
David Howells
eeba1e9cf3 afs: Fix in-progess ops to ignore server-level callback invalidation
The in-kernel afs filesystem client counts the number of server-level
callback invalidation events (CB.InitCallBackState* RPC operations) that it
receives from the server.  This is stored in cb_s_break in various
structures, including afs_server and afs_vnode.

If an inode is examined by afs_validate(), say, the afs_server copy is
compared, along with other break counters, to those in afs_vnode, and if
one or more of the counters do not match, it is considered that the
server's callback promise is broken.  At points where this happens,
AFS_VNODE_CB_PROMISED is cleared to indicate that the status must be
refetched from the server.

afs_validate() issues an FS.FetchStatus operation to get updated metadata -
and based on the updated data_version may invalidate the pagecache too.

However, the break counters are also used to determine whether to note a
new callback in the vnode (which would set the AFS_VNODE_CB_PROMISED flag)
and whether to cache the permit data included in the YFSFetchStatus record
by the server.


The problem comes when the server sends us a CB.InitCallBackState op.  The
first such instance doesn't cause cb_s_break to be incremented, but rather
causes AFS_SERVER_FL_NEW to be cleared - but thereafter, say some hours
after last use and all the volumes have been automatically unmounted and
the server has forgotten about the client[*], this *will* likely cause an
increment.

 [*] There are other circumstances too, such as the server restarting or
     needing to make space in its callback table.

Note that the server won't send us a CB.InitCallBackState op until we talk
to it again.

So what happens is:

 (1) A mount for a new volume is attempted, a inode is created for the root
     vnode and vnode->cb_s_break and AFS_VNODE_CB_PROMISED aren't set
     immediately, as we don't have a nominated server to talk to yet - and
     we may iterate through a few to find one.

 (2) Before the operation happens, afs_fetch_status(), say, notes in the
     cursor (fc.cb_break) the break counter sum from the vnode, volume and
     server counters, but the server->cb_s_break is currently 0.

 (3) We send FS.FetchStatus to the server.  The server sends us back
     CB.InitCallBackState.  We increment server->cb_s_break.

 (4) Our FS.FetchStatus completes.  The reply includes a callback record.

 (5) xdr_decode_AFSCallBack()/xdr_decode_YFSCallBack() check to see whether
     the callback promise was broken by checking the break counter sum from
     step (2) against the current sum.

     This fails because of step (3), so we don't set the callback record
     and, importantly, don't set AFS_VNODE_CB_PROMISED on the vnode.

This does not preclude the syscall from progressing, and we don't loop here
rechecking the status, but rather assume it's good enough for one round
only and will need to be rechecked next time.

 (6) afs_validate() it triggered on the vnode, probably called from
     d_revalidate() checking the parent directory.

 (7) afs_validate() notes that AFS_VNODE_CB_PROMISED isn't set, so doesn't
     update vnode->cb_s_break and assumes the vnode to be invalid.

 (8) afs_validate() needs to calls afs_fetch_status().  Go back to step (2)
     and repeat, every time the vnode is validated.

This primarily affects volume root dir vnodes.  Everything subsequent to
those inherit an already incremented cb_s_break upon mounting.


The issue is that we assume that the callback record and the cached permit
information in a reply from the server can't be trusted after getting a
server break - but this is wrong since the server makes sure things are
done in the right order, holding up our ops if necessary[*].

 [*] There is an extremely unlikely scenario where a reply from before the
     CB.InitCallBackState could get its delivery deferred till after - at
     which point we think we have a promise when we don't.  This, however,
     requires unlucky mass packet loss to one call.

AFS_SERVER_FL_NEW tries to paper over the cracks for the initial mount from
a server we've never contacted before, but this should be unnecessary.
It's also further insulated from the problem on an initial mount by
querying the server first with FS.GetCapabilities, which triggers the
CB.InitCallBackState.


Fix this by

 (1) Remove AFS_SERVER_FL_NEW.

 (2) In afs_calc_vnode_cb_break(), don't include cb_s_break in the
     calculation.

 (3) In afs_cb_is_broken(), don't include cb_s_break in the check.


Signed-off-by: David Howells <dhowells@redhat.com>
2019-04-13 08:37:37 +01:00
Marc Dionne
21bd68f196 afs: Unlock pages for __pagevec_release()
__pagevec_release() complains loudly if any page in the vector is still
locked.  The pages need to be locked for generic_error_remove_page(), but
that function doesn't actually unlock them.

Unlock the pages afterwards.

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jonathan Billings <jsbillin@umich.edu>
2019-04-13 08:37:37 +01:00
David Howells
8022c4b95c afs: Differentiate abort due to unmarshalling from other errors
Differentiate an abort due to an unmarshalling error from an abort due to
other errors, such as ENETUNREACH.  It doesn't make sense to set abort code
RXGEN_*_UNMARSHAL in such a case, so use RX_USER_ABORT instead.

Signed-off-by: David Howells <dhowells@redhat.com>
2019-04-13 08:37:37 +01:00
Andi Kleen
d2abfa86ff afs: Avoid section confusion in CM_NAME
__tracepoint_str cannot be const because the tracepoint_str
section is not read-only. Remove the stray const.

Cc: dhowells@redhat.com
Cc: viro@zeniv.linux.org.uk
Signed-off-by: Andi Kleen <ak@linux.intel.com>
2019-04-13 08:37:36 +01:00
Arnd Bergmann
ba25b81e3a afs: avoid deprecated get_seconds()
get_seconds() has a limited range on 32-bit architectures and is
deprecated because of that. While AFS uses the same limits for
its inode timestamps on the wire protocol, let's just use the
simpler current_time() as we do for other file systems.

This will still zero out the 'tv_nsec' field of the timestamps
internally.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David Howells <dhowells@redhat.com>
2019-04-13 08:37:36 +01:00
Chris Wilson
5d75dc2b08 drm/i915: Teach intel_workarounds to use uncore mmio access
Start weaning ourselves off the implicit I915_WRITE macro madness and
start using the explicit intel_uncore mmio access.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412202458.10653-1-chris@chris-wilson.co.uk
2019-04-13 07:46:43 +01:00
Linus Torvalds
6d0a598489 Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
 "Fix typos in user-visible resctrl parameters, and also fix assembly
  constraint bugs that might result in miscompilation"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/asm: Use stricter assembly constraints in bitops
  x86/resctrl: Fix typos in the mba_sc mount option
2019-04-12 20:54:40 -07:00
Linus Torvalds
122c215bfa Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Ingo Molnar:
 "Fix the alarm_timer_remaining() return value"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Return correct remaining time
2019-04-12 20:52:28 -07:00
Linus Torvalds
5e6f1fee60 Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Ingo Molnar:
 "Fix a NULL pointer dereference crash in certain environments"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Do not re-read ->h_load_next during hierarchical load calculation
2019-04-12 20:50:43 -07:00
Linus Torvalds
73fdb2c908 Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
 "Six kernel side fixes: three related to NMI handling on AMD systems, a
  race fix, a kexec initialization fix and a PEBS sampling fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix perf_event_disable_inatomic() race
  x86/perf/amd: Remove need to check "running" bit in NMI handler
  x86/perf/amd: Resolve NMI latency issues for active PMCs
  x86/perf/amd: Resolve race condition when disabling PMC
  perf/x86/intel: Initialize TFA MSR
  perf/x86/intel: Fix handling of wakeup_events for multi-entry PEBS
2019-04-12 20:42:30 -07:00
Linus Torvalds
26e2b81977 Merge branch 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Ingo Molnar:
 "Fixes a crash when accessing /proc/lockdep"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Zap lock classes even with lock debugging disabled
2019-04-12 20:31:08 -07:00
Linus Torvalds
6a022984c3 Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
 "Two genirq fixes, plus an irqchip driver error handling fix"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq: Respect IRQCHIP_SKIP_SET_WAKE in irq_chip_set_wake_parent()
  genirq: Initialize request_mutex if CONFIG_SPARSE_IRQ=n
  irqchip/irq-ls1x: Missing error code in ls1x_intc_of_init()
2019-04-12 20:21:59 -07:00
Linus Torvalds
54c63a7558 Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Ingo Molnar:
 "Fix an objtool warning plus fix a u64_to_user_ptr() macro expansion
  bug"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Add rewind_stack_do_exit() to the noreturn list
  linux/kernel.h: Use parentheses around argument in u64_to_user_ptr()
2019-04-12 20:13:13 -07:00
Xiang Chen
01d4e3a2fc scsi: hisi_sas: Some misc tidy-up
Do some minor tidy-up.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 21:30:12 -04:00
Luo Jiaxing
246ea3c0ad scsi: hisi_sas: Don't fail IT nexus reset for Open Reject timeout
Currently we call hisi_sas_softreset_ata_disk() in
hisi_sas_I_T_nexus_reset().

If this fails for open reject reason, there is no reason to fail the IT
nexus reset, so only fail for TMF_RESP_FUNC_FAILED.

Some other strings spilled over multiple lines are reunited.

Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 21:30:12 -04:00
Luo Jiaxing
a311570027 scsi: hisi_sas: Don't hard reset disk during controller reset
In the function of hisi_sas_init_device(), we added ops->hardreset() to
clear affiliation of STP target port or handle [STP pending] state.

Function hisi_sas_init_device() will be called when a device is found or
during controller reset. At controller reset, we call
hisi_sas_init_device() to re-init the disks, so calling hardreset() is
unnecessary and it also will cause some delay at controller reset.

Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 21:30:12 -04:00
Xiaofei Tan
3168d4f800 scsi: hisi_sas: Support all RAS events with MSI interrupts
This patch is to switch HW all error handling from PCI AER to MSI interrupt
due to non-standard PCI implementation. All HW errors which were being
reported through PCI AER can be reported through MSI interrupt also.

Do two things to complete the switch:

1. Notify FW to switch to MSI handling through ACPI DSM.

2. Add MSI handling for some hw errors, ECC errors and poison errors (we
   also call some of them AXI reuser error). They were handled only through
   PCI AER before.

For old FW reporting PCI AER events, the PCI AER handler will see that the
driver on longer support AER, and will leave the device in offlined state,
which is safe.

Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 21:30:12 -04:00
Xiang Chen
adb5b38c19 scsi: hisi_sas: allocate different SAS address for directly attached situation
In commit 8b8d665315 ("scsi: hisi_sas: make SAS address of SATA disks
unique"), we ensured that each SATA disk in the system has a unique SAS
address, even if it is fake. That was for v2 hw.

Add this for v3 hw.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 21:30:12 -04:00
Xiang Chen
18a54b329c scsi: hisi_sas: Adjust the printk format of functions hisi_sas_init_device()
In function hisi_sas_init_device(), the log is as follows when error for
hardreset:

  hisi_sas_v3_hw 0000:74:02.0: SATA disk hardreset fail: 0xffffffed

Actually if hardreset failed, its return value is negative, so change the
print format from %x to %d.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 21:30:12 -04:00
John Garry
c63b88ccff scsi: hisi_sas: Fix for setting the PHY linkrate when disconnected
In commit efdcad62e7 ("scsi: hisi_sas: Set PHY linkrate when
disconnected"), we use the sas_phy_data.enable flag to track whether the
PHY was enabled or not, so that we know if we should set the PHY negotiated
linkrate at SAS_LINK_RATE_UNKNOWN or SAS_PHY_DISABLED.

However, it is not proper to use sas_phy_data.enable, since it is only set
when libsas attempts to set the PHY disabled/enabled; hence, it may not
even have an initial value.

As a solution to this problem, introduce hisi_sas_phy.enable to track
whether the PHY is enabled or not, so that we can set the negotiated
linkrate properly when the PHY comes down.

Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 21:30:12 -04:00
Xiang Chen
447f78c0e1 scsi: hisi_sas: Remedy inconsistent PHY down state in software
Currently there are two scenarioes which may cause PHY state of hardware
(which is 0) is inconsistent with the state held in software:

- Unplug SAS wire before get_phys_state when SAS controller reset, then the
  interrupts of phy down are ignored, phy state is 0 before reset, and it
  also gets 0 after reset, so phy down doesn't occur even if unplugged SAS
  wire;

- For v3 hw later version, it will close bus when 2 bit ECC error occurs.
  So if unplug SAS wire at that time, interrupts of phy down also not
  occur. So at last it will cause host reset. It also get phy state 0
  before and after reset, the same issue occurs.

To solve it, use hisi_sas_phy_down() directly in rescan topology function.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 21:30:12 -04:00
Xiang Chen
a97fa58680 scsi: hisi_sas: add host reset interface for test
Add host reset interface to make it easier for testing the host reset
feature.

Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 21:30:11 -04:00
Martin K. Petersen
17631462cd Merge branch '5.1/scsi-fixes' into 5.2/merge
We have a few submissions for 5.2 that depend on fixes merged post
5.1-rc1. Merge the fixes branch into queue.

Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 21:27:23 -04:00
Lukas Bulwahn
1caf7a70a9 fs: drop unused fput_atomic definition
commit d7065da038 ("get rid of the magic around f_count in aio") added
fput_atomic to include/linux/fs.h, motivated by its use in __aio_put_req()
in fs/aio.c.

Later, commit 3ffa3c0e3f ("aio: now fput() is OK from interrupt context;
get rid of manual delayed __fput()") removed the only use of fput_atomic
in __aio_put_req(), but did not remove the since then unused fput_atomic
definition in include/linux/fs.h.

We curate this now and finally remove the unused definition.

This issue was identified during a code review due to a coccinelle warning
from the atomic_as_refcounter.cocci rule pointing to the use of atomic_t
in fput_atomic.

Suggested-by: Krystian Radlak <kradlak@exida.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2019-04-12 20:36:18 -04:00
David S. Miller
5fa7d3f9d3 Merge branch 'rhashtable-bit-locking-m68k'
NeilBrown says:

====================
Fix rhashtable bit-locking for m68k

As reported by Guenter Roeck, the new rhashtable bit-locking
doesn't work on m68k as it only requires 2-byte alignment, so BIT(1)
is addresses is not unused.

We current use BIT(0) to identify a NULLS marker, but that is only
needed in ->next pointers.  The bucket head does not need a NULLS
marker, so the lsb there can be used for locking.

the first 4 patches make some small improvements and re-arrange some
code.  The final patch converts to using only BIT(0) for these two
different special purposes.

I had previously suggested dropping the series until I fix it.  Given
that this was fairly easy, I retract that I think it best simply to
add these patches to fix the code.
====================

Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:34:46 -07:00
NeilBrown
ca0b709d1a rhashtable: use BIT(0) for locking.
As reported by Guenter Roeck, the new bit-locking using
BIT(1) doesn't work on the m68k architecture.  m68k only requires
2-byte alignment for words and longwords, so there is only one
unused bit in pointers to structs - We current use two, one for the
NULLS marker at the end of the linked list, and one for the bit-lock
in the head of the list.

The two uses don't need to conflict as we never need the head of the
list to be a NULLS marker - the marker is only needed to check if an
object has moved to a different table, and the bucket head cannot
move.  The NULLS marker is only needed in a ->next pointer.

As we already have different types for the bucket head pointer (struct
rhash_lock_head) and the ->next pointers (struct rhash_head), it is
fairly easy to treat the lsb differently in each.

So: Initialize buckets heads to NULL, and use the lsb for locking.
When loading the pointer from the bucket head, if it is NULL (ignoring
the lock big), report as being the expected NULLS marker.
When storing a value into a bucket head, if it is a NULLS marker,
store NULL instead.

And convert all places that used bit 1 for locking, to use bit 0.

Fixes: 8f0db01800 ("rhashtable: use bit_spin_locks to protect hash bucket.")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:34:45 -07:00
NeilBrown
f4712b46a5 rhashtable: replace rht_ptr_locked() with rht_assign_locked()
The only times rht_ptr_locked() is used, it is to store a new
value in a bucket-head.  This is the only time it makes sense
to use it too.  So replace it by a function which does the
whole task:  Sets the lock bit and assigns to a bucket head.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:34:45 -07:00
NeilBrown
adc6a3ab19 rhashtable: move dereference inside rht_ptr()
Rather than dereferencing a pointer to a bucket and then passing the
result to rht_ptr(), we now pass in the pointer and do the dereference
in rht_ptr().

This requires that we pass in the tbl and hash as well to support RCU
checks, and means that the various rht_for_each functions can expect a
pointer that can be dereferenced without further care.

There are two places where we dereference a bucket pointer
where there is no testable protection - in each case we know
that we much have exclusive access without having taken a lock.
The previous code used rht_dereference() to pretend that holding
the mutex provided protects, but holding the mutex never provides
protection for accessing buckets.

So instead introduce rht_ptr_exclusive() that can be used when
there is known to be exclusive access without holding any locks.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:34:45 -07:00
NeilBrown
c5783311a1 rhashtable: reorder some inline functions and macros.
This patch only moves some code around, it doesn't
change the code at all.
A subsequent patch will benefit from this as it needs
to add calls to functions which are now defined before the
call-site, but weren't before.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:34:45 -07:00
NeilBrown
e4edbe3c1f rhashtable: fix some __rcu annotation errors
With these annotations, the rhashtable now gets no
warnings when compiled with "C=1" for sparse checking.

Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:34:45 -07:00
Gustavo A. R. Silva
c252aa3e8e rhashtable: use struct_size() in kvzalloc()
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along with
memory for some number of elements for that array.  For example:

struct foo {
    int stuff;
    struct boo entry[];
};

size = sizeof(struct foo) + count * sizeof(struct boo);
instance = kvzalloc(size, GFP_KERNEL);

Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:

instance = kvzalloc(struct_size(instance, entry, count), GFP_KERNEL);

This code was detected with the help of Coccinelle.

Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:31:33 -07:00
David S. Miller
9d60f0ea1c Merge branch 'nfp-update-to-control-structures'
Jakub Kicinski says:

====================
nfp: update to control structures

This series prepares NFP control structures for crypto offloads.
So far we mostly dealt with configuration requests under rtnl lock.
This will no longer be the case with crypto.  Additionally we will
try to reuse the BPF control message format, so we move common code
out of BPF.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:29:15 -07:00
Jakub Kicinski
bcf0cafab4 nfp: split out common control message handling code
BPF's control message handler seems like a good base to built
on for request-reply control messages.  Split it out to allow
for reuse.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:29:15 -07:00
Jakub Kicinski
0a72d8332c nfp: move vNIC reset before netdev init
During probe we clear vNIC configuration in case the device
wasn't closed cleanly by previous driver.  Move that code
before netdev init, so netdev init can already try to apply
its config parameters.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:29:15 -07:00
Jakub Kicinski
dd5b2498d8 nfp: add a mutex lock for the vNIC ctrl BAR
Soon we will try to write to the vNIC mailbox without RTNL held.
Add a new mutex to protect access to specific parts of the PCI
control BAR.

Move the mailbox size checking to the mailbox lock() helper, where
it can be more effective (happen prior to potential overwrite of
other data).

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:29:15 -07:00
Dirk van der Merwe
e64718282c nfp: opportunistically poll for reconfig result
If the reconfig was a quick update, we could have results available from
firmware within 200us.

Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:29:15 -07:00
Stephen Suryaputra
ed0de45a10 ipv4: recompile ip options in ipv4_link_failure
Recompile IP options since IPCB may not be valid anymore when
ipv4_link_failure is called from arp_error_report.

Refer to the commit 3da1ed7ac3 ("net: avoid use IPCB in cipso_v4_error")
and the commit before that (9ef6b42ad6) for a similar issue.

Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:23:46 -07:00
Bart Van Assche
4b3766ec0e scsi: target/iscsi: Make sure PDU processing continues if parsing a command fails
Currently the iSCSI target driver sends a CHECK CONDITION code back to the
initiator if the immediate data buffer is too large but it does not discard
that immediate data buffer. The result is that the iSCSI target driver
attempts to parse the immediate data itself as iSCSI PDUs and that all
further iSCSI communication fails. Fix this by receiving and discarding too
large immediate data buffers.

Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 20:20:06 -04:00
Bart Van Assche
2e39f1c906 scsi: target/iscsi: Make iscsit_map_iovec() more robust
Make the code for mapping an iovec more robust by checking the bounds of
the allocated iovec. This patch avoids that the following crash occurs if a
map attempt is made that exceeds the bounds of the iovec that is being
mapped:

BUG: unable to handle kernel NULL pointer dereference at 00000000
00000014
RIP: 0010:iscsit_map_iovec+0x120/0x190 [iscsi_target_mod]
Call Trace:
 iscsit_get_rx_pdu+0x8a2/0xe00 [iscsi_target_mod]
 iscsi_target_rx_thread+0x6e/0xa0 [iscsi_target_mod]
 kthread+0x109/0x140

Cc: Mike Christie <mchristi@redhat.com>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 20:20:06 -04:00
Bart Van Assche
0ca650c13b scsi: target/iscsi: Handle too large immediate data buffers correctly
Since target_alloc_sgl() and iscsit_allocate_iovecs() allocate buffer space
for se_cmd.data_length bytes and since that number can be smaller than the
iSCSI Expected Data Transfer Length (EDTL), ensure that the iSCSI target
driver does not attempt to receive more bytes than what fits in the receive
buffer. Always receive the full immediate data buffer such that the iSCSI
target driver does not attempt to parse immediate data as an iSCSI PDU.

Note: the current code base only calls iscsit_get_dataout() if the size of
the immediate data buffer does not exceed the buffer size derived from the
SCSI CDB. See also target_cmd_size_check().

Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 20:20:06 -04:00
Bart Van Assche
96e8e26dd8 scsi: target/iscsi: Only send R2T if needed
If an initiator submits more immediate data than the size derived from the
SCSI CDB, do not send any R2T to the initiator. This scenario is triggered
by the libiscsi test ALL.iSCSIResiduals.WriteVerify16Residuals if the iSCSI
target driver is modified to discard too large immediate data buffers
instead of trying to parse these as an iSCSI PDU. This patch avoids that a
negative xfer_len value is passed to iscsit_add_r2t_to_list() if too large
immediate data buffers are handled correctly.

Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 20:20:06 -04:00