Commit graph

982,081 commits

Author SHA1 Message Date
Bart Van Assche
b0055acaed scsi: target/iscsi: Detect conn_cmd_list corruption early
Certain behavior of an initiator can cause the target driver to send both a
reject and a SCSI response. If that happens two target_put_sess_cmd() calls
will occur without the command having been removed from conn_cmd_list. In
other words, conn_cmd_list will get corrupted once the freed memory is
reused. Although the Linux kernel can detect list corruption if list
debugging is enabled, in this case the context in which list corruption is
detected is not related to the context that caused list corruption.  Hence
add WARN_ON() statements that report the context that is causing list
corruption.

Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 20:20:06 -04:00
Bart Van Assche
be71530aa9 scsi: target/core: Make the XCOPY setup code easier to read by inlining two functions
The target_xcopy_setup_pt_port() and target_xcopy_init_pt_lun() functions
obfuscate what is really going on. Hence inline these two functions. This
patch does not change any functionality.

Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 20:20:06 -04:00
Bart Van Assche
0f57cf5ce7 scsi: target/core: Simplify LUN initialization in XCOPY implementation
Other than removing a few pr_debug() statements, this patch does not change
any functionality.

Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 20:20:05 -04:00
Bart Van Assche
82b76b4476 scsi: target/core: Remove a set-but-not-used member variable from the XCOPY implementation
This patch does not change any functionality.

Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 20:20:05 -04:00
Bart Van Assche
fae43461f8 scsi: target/core: Rework the SPC-2 reservation handling code
Instead of tracking the initiator that established an SPC-2 reservation,
track the session through which the SPC-2 reservation has been
established. This patch does not change any functionality.

Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 20:20:05 -04:00
Bart Van Assche
63f7479439 scsi: target/core: Fix a race condition in the LUN lookup code
The rcu_dereference(deve->se_lun) expression occurs twice in the LUN lookup
functions. Since these expressions are not serialized against deve->se_lun
assignments each of these expressions may yield a different result. Avoid
that the wrong LUN pointer is stored in se_cmd by reading deve->se_lun only
once.

Cc: Mike Christie <mchristi@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Nicholas Bellinger <nab@linux-iscsi.org>
Fixes: 29a05deebf ("target: Convert se_node_acl->device_list[] to RCU hlist") # v4.10
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 20:20:05 -04:00
Hannes Reinecke
a6a6d0589a scsi: scsi_transport_fc: nvme: display FC-NVMe port roles
Currently the FC-NVMe driver is leverating the SCSI FC transport class to
access the remote ports. Which means that all FC-NVMe remote ports will be
visible to the fc transport layer, but due to missing definitions the port
roles will always be 'unknown'.  This patch adds the missing definitions to
the fc transport class to that the port roles are correctly displayed.

Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Ewan D. Milne <emilne@redhat.com>
Reviewed-by: Giridhar Malavali <gmalavali@marvell.com>
Reviewed-by: Himanshu Madhani <hmadhani@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 20:09:34 -04:00
Jiong Wang
c342dc109a bpf: refactor "check_reg_arg" to eliminate code redundancy
There are a few "regs[regno]" here are there across "check_reg_arg", this
patch factor it out into a simple "reg" pointer. The intention is to
simplify code indentation and make the later patches in this set look
cleaner.

Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 17:06:33 -07:00
Jiong Wang
55e7f3b5ac bpf: factor out reg and stack slot propagation into "propagate_liveness_reg"
After code refactor in previous patches, the propagation logic inside the
for loop in "propagate_liveness" becomes clear that they are good enough to
be factored out into a common function "propagate_liveness_reg".

Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 17:06:33 -07:00
Jiong Wang
3f8cafa413 bpf: refactor propagate_liveness to eliminate code redundance
Access to reg states were not factored out, the consequence is long code
for dereferencing them which made the indentation not good for reading.

This patch factor out these code so the core code in the loop could be
easier to follow.

Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 17:06:33 -07:00
Jiong Wang
1b04aee7e2 bpf: refactor propagate_liveness to eliminate duplicated for loop
Propagation for register and stack slot are finished in separate for loop,
while they are perfect to be put into a single loop.

This could also let them share some common variables in later patches.

Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 17:06:33 -07:00
David Ahern
1deeb6408c ipv6: Remove flowi6_oif compare from __ip6_route_redirect
In the review of 0b34eb0043 ("ipv6: Refactor __ip6_route_redirect"),
Martin noted that the flowi6_oif compare is moved to the new helper and
should be removed from __ip6_route_redirect. Fix the oversight.

Fixes: 0b34eb0043 ("ipv6: Refactor __ip6_route_redirect")
Reported-by: Martin Lau <kafai@fb.com>
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 17:05:38 -07:00
Colin Ian King
ea63e60f7a scsi: cxgbi: remove redundant __kfree_skb call on skb and free cst->atid
The error return path via label rel_resource checks for a non-null skb
before free'ing it.  However, skb is always null at this exit path, so the
null check and the free are redundant and can be removed.  Removing this
allows the original goto's to rel_resource to be cleaned up; the first can
be replaced by a return of -EINVAL, the second can be replaced by a more
appropriate -ENOMEM return and fix a memory leak by freeing csk->atid.

Addresses-Coverity: ("Logically Dead Code")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2019-04-12 20:05:31 -04:00
David S. Miller
9e550f0153 Merge branch 'rxrpc-fixes'
David Howells says:

====================
rxrpc: Fixes

Here is a collection of fixes for rxrpc:

 (1) rxrpc_error_report() needs to call sock_error() to clear the error
     code from the UDP transport socket, lest it be unexpectedly revisited
     on the next kernel_sendmsg() call.  This has been causing all sorts of
     weird effects in AFS as the effects have typically been felt by the
     wrong RxRPC call.

 (2) Allow a kernel user of AF_RXRPC to easily detect if an rxrpc call has
     completed.

 (3) Allow errors incurred by attempting to transmit data through the UDP
     socket to get back up the stack to AFS.

 (4) Make AFS use (2) to abort the synchronous-mode call waiting loop if
     the rxrpc-level call completed.

 (5) Add a missing tracepoint case for tracing abort reception.

 (6) Fix detection and handling of out-of-order ACKs.

====================

Tested-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:57:23 -07:00
Jeffrey Altman
1a2391c30c rxrpc: Fix detection of out of order acks
The rxrpc packet serial number cannot be safely used to compute out of
order ack packets for several reasons:

 1. The allocation of serial numbers cannot be assumed to imply the order
    by which acks are populated and transmitted.  In some rxrpc
    implementations, delayed acks and ping acks are transmitted
    asynchronously to the receipt of data packets and so may be transmitted
    out of order.  As a result, they can race with idle acks.

 2. Serial numbers are allocated by the rxrpc connection and not the call
    and as such may wrap independently if multiple channels are in use.

In any case, what matters is whether the ack packet provides new
information relating to the bounds of the window (the firstPacket and
previousPacket in the ACK data).

Fix this by discarding packets that appear to wind back the window bounds
rather than on serial number procession.

Fixes: 298bc15b20 ("rxrpc: Only take the rwind and mtu values from latest ACK")
Signed-off-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:57:23 -07:00
David Howells
39ce675575 rxrpc: Trace received connection aborts
Trace received calls that are aborted due to a connection abort, typically
because of authentication failure.  Without this, connection aborts don't
show up in the trace log.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:57:23 -07:00
Marc Dionne
f7f1dd3162 afs: Check for rxrpc call completion in wait loop
Check the state of the rxrpc call backing an afs call in each iteration of
the call wait loop in case the rxrpc call has already been terminated at
the rxrpc layer.

Interrupt the wait loop and mark the afs call as complete if the rxrpc
layer call is complete.

There were cases where rxrpc errors were not passed up to afs, which could
result in this loop waiting forever for an afs call to transition to
AFS_CALL_COMPLETE while the rx call was already complete.

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:57:23 -07:00
Marc Dionne
8e8715aaa9 rxrpc: Allow errors to be returned from rxrpc_queue_packet()
Change rxrpc_queue_packet()'s signature so that it can return any error
code it may encounter when trying to send the packet.

This allows the caller to eventually do something in case of error - though
it should be noted that the packet has been queued and a resend is
scheduled.

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:57:23 -07:00
Marc Dionne
4611da30d6 rxrpc: Make rxrpc_kernel_check_life() indicate if call completed
Make rxrpc_kernel_check_life() pass back the life counter through the
argument list and return true if the call has not yet completed.

Suggested-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:57:23 -07:00
Marc Dionne
56d282d9db rxrpc: Clear socket error
When an ICMP or ICMPV6 error is received, the error will be attached
to the socket (sk_err) and the report function will get called.
Clear any pending error here by calling sock_error().

This would cause the following attempt to use the socket to fail with
the error code stored by the ICMP error, resulting in unexpected errors
with various side effects depending on the context.

Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Jonathan Billings <jsbillin@umich.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:57:23 -07:00
Colin Ian King
1dc2b3d655 qede: fix write to free'd pointer error and double free of ptp
The err2 error return path calls qede_ptp_disable that cleans up
on an error and frees ptp. After this, the free'd ptp is dereferenced
when ptp->clock is set to NULL and the code falls-through to error
path err1 that frees ptp again.

Fix this by calling qede_ptp_disable and exiting via an error
return path that does not set ptp->clock or kfree ptp.

Addresses-Coverity: ("Write to pointer after free")
Fixes: 035744975a ("qede: Add support for PTP resource locking.")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:55:47 -07:00
Colin Ian King
0a2c34f18c vxge: fix return of a free'd memblock on a failed dma mapping
Currently if a pci dma mapping failure is detected a free'd
memblock address is returned rather than a NULL (that indicates
an error). Fix this by ensuring NULL is returned on this error case.

Addresses-Coverity: ("Use after free")
Fixes: 528f727279 ("vxge: code cleanup and reorganization")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:54:41 -07:00
David S. Miller
8c5a3ca306 Merge branch 'netdevsim-Mostly-cleanup-in-sdev-bpf-iface-area'
Jiri Pirko says:

====================
netdevsim: Mostly cleanup in sdev/bpf iface area

This patches does mainly internal netdevsim code shuffle. Nothing
serious, just small changes to help readability and preparations for
future work.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:49:54 -07:00
Jiri Pirko
4b3a84bce4 netdevsim: move sdev-specific init/uninit code into separate functions
In order to improve readability and prepare for future code changes,
move sdev specific init/uninit code into separate functions.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:49:54 -07:00
Jiri Pirko
b26b6946a6 netdevsim: make bpf_offload_dev_create() per-sdev instead of first ns
offload dev is stored in sdev struct. However, first netdevsim instance
is used as a priv. Change this to be sdev to as it is shared among
multiple netdevsim instances.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:49:54 -07:00
Jiri Pirko
38f58c9723 netdevsim: move sdev specific bpf debugfs files to sdev dir
Some netdevsim bpf debugfs files are per-sdev, yet they are defined per
netdevsim instance. Move them under sdev directory.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:49:54 -07:00
Jiri Pirko
af9095f00d netdevsim: move shared dev creation and destruction into separate file
To make code easier to read, move shared dev bits into a separate file.

Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:49:54 -07:00
Ioana Ciornei
3c91d11483 Documentation: net: dsa: transition to the rst format
This patch also performs some minor adjustments such as numbering for
the receive path sequence, conversion of keywords to inline literals and
adding an index page so it looks better in the output of 'make htmldocs'.

Signed-off-by: Ioana Ciornei <ciorneiioana@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:48:35 -07:00
Dongli Zhang
53b29c3368 swiotlb: save io_tlb_used to local variable before leaving critical section
When swiotlb is full, the kernel would print io_tlb_used. However, the
result might be inaccurate at that time because we have left the critical
section protected by spinlock.

Therefore, we backup the io_tlb_used into local variable before leaving
critical section.

Fixes: 83ca259489 ("swiotlb: dump used and total slots when swiotlb buffer is full")
Suggested-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2019-04-12 19:44:46 -04:00
Julian Wiedmann
056b21fbe6 net: veth: use generic helper to report timestamping info
For reporting the common set of SW timestamping capabilities, use
ethtool_op_get_ts_info() instead of re-implementing it.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:26:37 -07:00
Julian Wiedmann
af730342ec net: loopback: use generic helper to report timestamping info
For reporting the common set of SW timestamping capabilities, use
ethtool_op_get_ts_info() instead of re-implementing it.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:26:37 -07:00
Julian Wiedmann
abe9fd5726 net: dummy: use generic helper to report timestamping info
For reporting the common set of SW timestamping capabilities, use
ethtool_op_get_ts_info() instead of re-implementing it.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-12 16:26:37 -07:00
Andrey Ignatov
51356ac89b bpf: Fix distinct pointer types warning for ARCH=i386
Fix a new warning reported by kbuild for make ARCH=i386:

   In file included from kernel/bpf/cgroup.c:11:0:
   kernel/bpf/cgroup.c: In function '__cgroup_bpf_run_filter_sysctl':
   include/linux/kernel.h:827:29: warning: comparison of distinct pointer types lacks a cast
      (!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
                                ^
   include/linux/kernel.h:841:4: note: in expansion of macro '__typecheck'
      (__typecheck(x, y) && __no_side_effects(x, y))
       ^~~~~~~~~~~
   include/linux/kernel.h:851:24: note: in expansion of macro '__safe_cmp'
     __builtin_choose_expr(__safe_cmp(x, y), \
                           ^~~~~~~~~~
   include/linux/kernel.h:860:19: note: in expansion of macro '__careful_cmp'
    #define min(x, y) __careful_cmp(x, y, <)
                      ^~~~~~~~~~~~~
>> kernel/bpf/cgroup.c:837:17: note: in expansion of macro 'min'
      ctx.new_len = min(PAGE_SIZE, *pcount);
                    ^~~

Fixes: 4e63acdff8 ("bpf: Introduce bpf_sysctl_{get,set}_new_value helpers")
Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 16:11:55 -07:00
James Morris
2bfebea90d Merge branch 'next-integrity-for-james' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity into next-integrity
From Mimi:

"This pull request contains just three patches, the remainder are
either included in other pull requests (eg. audit, lockdown) or will
be upstreamed via other subsystems (eg. kselftests, Power).  Included
in this pull request is one bug fix, one documentation update, and
extending the x86 IMA arch policy rules to coordinate the different
kernel module signature verification methods."
2019-04-12 15:20:23 -07:00
Bob Paauwe
39564ae86d drm/i915/ehl: Inherit Ice Lake conditional code
Most of the conditional code for ICELAKE also applies to ELKHARTLAKE
so use IS_GEN(dev_priv, 11) even for PM and Workarounds for now.

v2: - Rename commit (Jose)
    - Include a wm workaround (Jose and Lucas)
    - Include display core init (Jose and Lucas)
v3: Add a missing case of gen greater-than 11 (Jose)

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Bob Paauwe <bob.j.paauwe@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190412180920.22347-1-rodrigo.vivi@intel.com
2019-04-12 15:15:01 -07:00
Leonard Crestez
f89b9e1be7 clk: imx: Fix PLL_1416X not rounding rates
Code which initializes the "clk_init_data.ops" checks pll->rate_table
before that field is ever assigned to so it always picks
"clk_pll1416x_min_ops".

This breaks dynamic rate rounding for features such as cpufreq.

Fix by checking pll_clk->rate_table instead, here pll_clk refers to
the constant initialization data coming from per-soc clk driver.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Fixes: 8646d4dcc7 ("clk: imx: Add PLLs driver for imx8mm soc")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-12 14:21:43 -07:00
Alexei Starovoitov
a43d05086c Merge branch 'bpf-sysctl-hook'
Andrey Ignatov says:

====================
v2->v3:
- simplify C based selftests by relying on variable offset stack access.

v1->v2:
- add fs/proc/proc_sysctl.c mainteners to Cc:.

The patch set introduces new BPF hook for sysctl.

It adds new program type BPF_PROG_TYPE_CGROUP_SYSCTL and attach type
BPF_CGROUP_SYSCTL.

BPF_CGROUP_SYSCTL hook is placed before calling to sysctl's proc_handler so
that accesses (read/write) to sysctl can be controlled for specific cgroup
and either allowed or denied, or traced.

The hook has access to sysctl name, current sysctl value and (on write
only) to new sysctl value via corresponding helpers. New sysctl value can
be overridden by program. Both name and values (current/new) are
represented as strings same way they're visible in /proc/sys/. It is up to
program to parse these strings.

To help with parsing the most common kind of sysctl value, vector of
integers, two new helpers are provided: bpf_strtol and bpf_strtoul with
semantic similar to user space strtol(3) and strtoul(3).

The hook also provides bpf_sysctl context with two fields:
* @write indicates whether sysctl is being read (= 0) or written (= 1);
* @file_pos is sysctl file position to read from or write to, can be
  overridden.

The hook allows to make better isolation for containerized applications
that are run as root so that one container can't change a sysctl and affect
all other containers on a host, make changes to allowed sysctl in a safer
way and simplify sysctl tracing for cgroups.

Patch 1 is preliminary refactoring.
Patch 2 adds new program and attach types.
Patches 3-5 implement helpers to access sysctl name and value.
Patch 6 adds file_pos field to bpf_sysctl context.
Patch 7 updates UAPI in tools.
Patches 8-9 add support for the new hook to libbpf and corresponding test.
Patches 10-14 add selftests for the new hook.
Patch 15 adds support for new arg types to verifier: pointer to integer.
Patch 16 adds bpf_strto{l,ul} helpers to parse integers from sysctl value.
Patch 17 updates UAPI in tools.
Patch 18 updates bpf_helpers.h.
Patch 19 adds selftests for pointer to integer in verifier.
Patches 20-21 add selftests for bpf_strto{l,ul}, including integration
              C based test for sysctl value parsing.
====================

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 13:56:11 -07:00
Andrey Ignatov
7568f4cbbe selftests/bpf: C based test for sysctl and strtoX
Add C based test for a few bpf_sysctl_* helpers and bpf_strtoul.

Make sure that sysctl can be identified by name and that multiple
integers can be parsed from sysctl value with bpf_strtoul.

net/ipv4/tcp_mem is chosen as a testing sysctl, it contains 3 unsigned
longs, they all are parsed and compared (val[0] < val[1] < val[2]).

Example of output:
  # ./test_sysctl
  ...
  Test case: C prog: deny all writes .. [PASS]
  Test case: C prog: deny access by name .. [PASS]
  Test case: C prog: read tcp_mem .. [PASS]
  Summary: 39 PASSED, 0 FAILED

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 13:54:59 -07:00
Andrey Ignatov
8549ddc832 selftests/bpf: Test bpf_strtol and bpf_strtoul helpers
Test that bpf_strtol and  bpf_strtoul helpers can be used to convert
provided buffer to long or unsigned long correspondingly and return both
correct result and number of consumed bytes, or proper errno.

Example of output:
  # ./test_sysctl
  ..
  Test case: bpf_strtoul one number string .. [PASS]
  Test case: bpf_strtoul multi number string .. [PASS]
  Test case: bpf_strtoul buf_len = 0, reject .. [PASS]
  Test case: bpf_strtoul supported base, ok .. [PASS]
  Test case: bpf_strtoul unsupported base, EINVAL .. [PASS]
  Test case: bpf_strtoul buf with spaces only, EINVAL .. [PASS]
  Test case: bpf_strtoul negative number, EINVAL .. [PASS]
  Test case: bpf_strtol negative number, ok .. [PASS]
  Test case: bpf_strtol hex number, ok .. [PASS]
  Test case: bpf_strtol max long .. [PASS]
  Test case: bpf_strtol overflow, ERANGE .. [PASS]
  Summary: 36 PASSED, 0 FAILED

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 13:54:59 -07:00
Andrey Ignatov
c2d5f12e4c selftests/bpf: Test ARG_PTR_TO_LONG arg type
Test that verifier handles new argument types properly, including
uninitialized or partially initialized value, misaligned stack access,
etc.

Example of output:
  #456/p ARG_PTR_TO_LONG uninitialized OK
  #457/p ARG_PTR_TO_LONG half-uninitialized OK
  #458/p ARG_PTR_TO_LONG misaligned OK
  #459/p ARG_PTR_TO_LONG size < sizeof(long) OK
  #460/p ARG_PTR_TO_LONG initialized OK

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 13:54:59 -07:00
Andrey Ignatov
99f57973ac selftests/bpf: Add sysctl and strtoX helpers to bpf_helpers.h
Add bpf_sysctl_* and bpf_strtoX helpers to bpf_helpers.h.

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 13:54:59 -07:00
Andrey Ignatov
b457e5534c bpf: Sync bpf.h to tools/
Sync bpf_strtoX related bpf UAPI changes to tools/.

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 13:54:59 -07:00
Andrey Ignatov
d7a4cb9b67 bpf: Introduce bpf_strtol and bpf_strtoul helpers
Add bpf_strtol and bpf_strtoul to convert a string to long and unsigned
long correspondingly. It's similar to user space strtol(3) and
strtoul(3) with a few changes to the API:

* instead of NUL-terminated C string the helpers expect buffer and
  buffer length;

* resulting long or unsigned long is returned in a separate
  result-argument;

* return value is used to indicate success or failure, on success number
  of consumed bytes is returned that can be used to identify position to
  read next if the buffer is expected to contain multiple integers;

* instead of *base* argument, *flags* is used that provides base in 5
  LSB, other bits are reserved for future use;

* number of supported bases is limited.

Documentation for the new helpers is provided in bpf.h UAPI.

The helpers are made available to BPF_PROG_TYPE_CGROUP_SYSCTL programs to
be able to convert string input to e.g. "ulongvec" output.

E.g. "net/ipv4/tcp_mem" consists of three ulong integers. They can be
parsed by calling to bpf_strtoul three times.

Implementation notes:

Implementation includes "../../lib/kstrtox.h" to reuse integer parsing
functions. It's done exactly same way as fs/proc/base.c already does.

Unfortunately existing kstrtoX function can't be used directly since
they fail if any invalid character is present right after integer in the
string. Existing simple_strtoX functions can't be used either since
they're obsolete and don't handle overflow properly.

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 13:54:59 -07:00
Andrey Ignatov
57c3bb725a bpf: Introduce ARG_PTR_TO_{INT,LONG} arg types
Currently the way to pass result from BPF helper to BPF program is to
provide memory area defined by pointer and size: func(void *, size_t).

It works great for generic use-case, but for simple types, such as int,
it's overkill and consumes two arguments when it could use just one.

Introduce new argument types ARG_PTR_TO_INT and ARG_PTR_TO_LONG to be
able to pass result from helper to program via pointer to int and long
correspondingly: func(int *) or func(long *).

New argument types are similar to ARG_PTR_TO_MEM with the following
differences:
* they don't require corresponding ARG_CONST_SIZE argument, predefined
  access sizes are used instead (32bit for int, 64bit for long);
* it's possible to use more than one such an argument in a helper;
* provided pointers have to be aligned.

It's easy to introduce similar ARG_PTR_TO_CHAR and ARG_PTR_TO_SHORT
argument types. It's not done due to lack of use-case though.

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 13:54:59 -07:00
Andrey Ignatov
9a1027e525 selftests/bpf: Test file_pos field in bpf_sysctl ctx
Test access to file_pos field of bpf_sysctl context, both read (incl.
narrow read) and write.

  # ./test_sysctl
  ...
  Test case: ctx:file_pos sysctl:read read ok .. [PASS]
  Test case: ctx:file_pos sysctl:read read ok narrow .. [PASS]
  Test case: ctx:file_pos sysctl:read write ok .. [PASS]
  ...

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 13:54:59 -07:00
Andrey Ignatov
786047dd08 selftests/bpf: Test bpf_sysctl_{get,set}_new_value helpers
Test that new value provided by user space on sysctl write can be read
by bpf_sysctl_get_new_value and overridden by bpf_sysctl_set_new_value.

  # ./test_sysctl
  ...
  Test case: sysctl_get_new_value sysctl:read EINVAL .. [PASS]
  Test case: sysctl_get_new_value sysctl:write ok .. [PASS]
  Test case: sysctl_get_new_value sysctl:write ok long .. [PASS]
  Test case: sysctl_get_new_value sysctl:write E2BIG .. [PASS]
  Test case: sysctl_set_new_value sysctl:read EINVAL .. [PASS]
  Test case: sysctl_set_new_value sysctl:write ok .. [PASS]
  Summary: 22 PASSED, 0 FAILED

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 13:54:59 -07:00
Andrey Ignatov
11ff34f74e selftests/bpf: Test sysctl_get_current_value helper
Test sysctl_get_current_value on sysctl read and write, buffers with
enough space and too small buffers to get E2BIG and truncated result,
etc.

  # ./test_sysctl
  ...
  Test case: sysctl_get_current_value sysctl:read ok, gt .. [PASS]
  Test case: sysctl_get_current_value sysctl:read ok, eq .. [PASS]
  Test case: sysctl_get_current_value sysctl:read E2BIG truncated ..  [PASS]
  Test case: sysctl_get_current_value sysctl:read EINVAL .. [PASS]
  Test case: sysctl_get_current_value sysctl:write ok .. [PASS]
  Summary: 16 PASSED, 0 FAILED

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 13:54:59 -07:00
Andrey Ignatov
6041c67f28 selftests/bpf: Test bpf_sysctl_get_name helper
Test w/ and w/o BPF_F_SYSCTL_BASE_NAME, buffers with enough space and
too small buffers to get E2BIG and truncated result, etc.

  # ./test_sysctl
  ...
  Test case: sysctl_get_name sysctl_value:base ok .. [PASS]
  Test case: sysctl_get_name sysctl_value:base E2BIG truncated .. [PASS]
  Test case: sysctl_get_name sysctl:full ok .. [PASS]
  Test case: sysctl_get_name sysctl:full E2BIG truncated .. [PASS]
  Test case: sysctl_get_name sysctl:full E2BIG truncated small .. [PASS]
  Summary: 11 PASSED, 0 FAILED

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 13:54:58 -07:00
Andrey Ignatov
1f5fa9ab6e selftests/bpf: Test BPF_CGROUP_SYSCTL
Add unit test for BPF_PROG_TYPE_CGROUP_SYSCTL program type.

Test that program can allow/deny access.
Test both valid and invalid accesses to ctx->write.

Example of output:
  # ./test_sysctl
  Test case: sysctl wrong attach_type .. [PASS]
  Test case: sysctl:read allow all .. [PASS]
  Test case: sysctl:read deny all .. [PASS]
  Test case: ctx:write sysctl:read read ok .. [PASS]
  Test case: ctx:write sysctl:write read ok .. [PASS]
  Test case: ctx:write sysctl:read write reject .. [PASS]
  Summary: 6 PASSED, 0 FAILED

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 13:54:58 -07:00
Andrey Ignatov
7007af63da selftests/bpf: Test sysctl section name
Add unit test to verify that program and attach types are properly
identified for "cgroup/sysctl" section name.

Signed-off-by: Andrey Ignatov <rdna@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-12 13:54:58 -07:00