Commit graph

982,081 commits

Author SHA1 Message Date
Abhishek Ambure
7d94f862d6 ath10k: update GCMP & GCMP-256 cipher suite number for WCN3990
TLV based firmware ex. QCA6174, WCN3990 expects key cipher value
set to 9 while non-TLV firmware expects key cipher value set to 8
for enabling GCMP and GCMP-256 cipher suites.

To fix this problem, attach the key cipher suite values based on
wmi version.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Signed-off-by: Abhishek Ambure <aambure@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-11 18:26:04 +02:00
Abhishek Ambure
7ba31e6e0c ath10k: assign 'n_cipher_suites = 11' for WCN3990 to enable WPA3
Hostapd uses CCMP, GCMP & GCMP-256 as 'wpa_pairwise' option to run WPA3.
In WCN3990 firmware cipher suite numbers 9 to 11 are for CCMP,
GCMP & GCMP-256.

To enable CCMP, GCMP & GCMP-256 cipher suites in WCN3990 firmware,
host sets 'n_cipher_suites = 11' while initializing hardware parameters.

Tested HW: WCN3990
Tested FW: WLAN.HL.2.0-01188-QCAHLSWMTPLZ-1

Signed-off-by: Abhishek Ambure <aambure@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2019-02-11 18:25:54 +02:00
Cody Schuffelen
f440b12545 virt_wifi: Remove REGULATORY_WIPHY_SELF_MANAGED
REGULATORY_WIPHY_SELF_MANAGED as set here breaks NL80211_CMD_GET_REG,
because it expects the wiphy to do regulatory management. Since
virt_wifi does not do regulatory management, this triggers a WARN_ON in
NL80211_CMD_GET_REG and fails the netlink command.

Removing REGULATORY_WIPHY_SELF_MANAGED fixes the problem and the virtual
wireless network continues to work.

Signed-off-by: Cody Schuffelen <schuffelen@google.com>
Acked-by: Alistair Strachan <astrachan@google.com>
Acked-by: Greg Hartman <ghartman@google.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 17:10:48 +01:00
Sergej Sawazki
e9418629e2
ASoC: wm8741: Set OSR mode in hw_params()
For correct operation of the digital filtering and other processing on the
WM8741, the user must ensure the correct value of OSR[1:0] is set at all
times.[1] Hence, depending the selected sampling rate, set the OSR (over-
sampling rate) mode in hw_params().

References:
	[1] "WM8741 Data Sheet"

Signed-off-by: Sergej Sawazki <sergej@taudac.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-11 16:05:56 +00:00
Sergej Sawazki
36b1599340
ASoC: wm8741: Add digital mute callback
Signed-off-by: Sergej Sawazki <sergej@taudac.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-11 16:05:28 +00:00
Ranjani Sridharan
d9c0b2afe8 ALSA: PCM: check if ops are defined before suspending PCM
BE dai links only have internal PCM's and their substream ops may
not be set. Suspending these PCM's will result in their
 ops->trigger() being invoked and cause a kernel oops.
So skip suspending PCM's if their ops are NULL.

[ NOTE: this change is required now for following the recent PCM core
  change to get rid of snd_pcm_suspend() call.  Since DPCM BE takes
  the runtime carried from FE while keeping NULL ops, it can hit this
  bug.  See details at:
     https://github.com/thesofproject/linux/pull/582
  -- tiwai ]

Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-11 17:04:25 +01:00
Pierre-Louis Bossart
c7ba4e5396
ASoC: hdac_hdmi: use devm_kzalloc for all structures
Loading/unloading modules exposes issues with memory allocation, which
is a mix of devm_kzalloc and manual kzalloc. Move to devm_k routines
everywhere to simplify all this.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-11 16:01:59 +00:00
KaiChieh Chuang
49ff8cfb17
ASoC: mediatek: use %pOFn instead of device_node.name
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.

Signed-off-by: KaiChieh Chuang <kaichieh.chuang@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-11 16:01:48 +00:00
Kirill Marinushkin
1e61405e20
ASoC: pcm3060: Add clock select
ADC and DAC can be clocked from separate or same sources CLK1 and CLK2.
By default, ADC is clocked from CLK1, and DAC - from CLK2.

This commits allows sound cards to selest a proper clock source during
`hw_params()` via `snd_soc_dai_set_sysclk()`. It makes possible to have a
single clock source for both ADC and DAC.

Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-11 16:01:31 +00:00
Kirill Marinushkin
a3daee0859
ASoC: pcm3060: Add soft reset on probe
Softly reset registers values on module probe

Signed-off-by: Kirill Marinushkin <kmarinushkin@birdec.tech>
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-11 15:59:22 +00:00
Johannes Berg
5d4071abd9 cfg80211: fix and clean up cfg80211_gen_new_bssid()
Fix cfg80211_gen_new_bssid() to not rely on u64 modulo arithmetic,
which isn't needed since we really just want to mask there. Also,
clean it up to calculate the mask only once and use GENMASK_ULL()
instead of open-coding the mask calculation.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 16:54:08 +01:00
Jouni Malinen
7388afe091 cfg80211: Use const more consistently in for_each_element macros
Enforce the first argument to be a correct type of a pointer to struct
element and avoid unnecessary typecasts from const to non-const pointers
(the change in validate_ie_attr() is needed to make this part work). In
addition, avoid signed/unsigned comparison within for_each_element() and
mark struct element packed just in case.

Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 16:51:18 +01:00
Federico Vaga
db693aded3 doc:dmaengine: clarify DMA desc. pointer after submission
It clarifies that the DMA description pointer returned by
`dmaengine_prep_*` function should not be used after submission.

Signed-off-by: Federico Vaga <federico.vaga@cern.ch>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-02-11 08:40:16 -07:00
Alexei Starovoitov
3defaf2f15 bpf: fix lockdep false positive in stackmap
Lockdep warns about false positive:
[   11.211460] ------------[ cut here ]------------
[   11.211936] DEBUG_LOCKS_WARN_ON(depth <= 0)
[   11.211985] WARNING: CPU: 0 PID: 141 at ../kernel/locking/lockdep.c:3592 lock_release+0x1ad/0x280
[   11.213134] Modules linked in:
[   11.214954] RIP: 0010:lock_release+0x1ad/0x280
[   11.223508] Call Trace:
[   11.223705]  <IRQ>
[   11.223874]  ? __local_bh_enable+0x7a/0x80
[   11.224199]  up_read+0x1c/0xa0
[   11.224446]  do_up_read+0x12/0x20
[   11.224713]  irq_work_run_list+0x43/0x70
[   11.225030]  irq_work_run+0x26/0x50
[   11.225310]  smp_irq_work_interrupt+0x57/0x1f0
[   11.225662]  irq_work_interrupt+0xf/0x20

since rw_semaphore is released in a different task vs task that locked the sema.
It is expected behavior.
Fix the warning with up_read_non_owner() and rwsem_release() annotation.

Fixes: bae77c5eb5 ("bpf: enable stackmap with build_id in nmi context")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-11 16:36:24 +01:00
Alexey Budankov
f4fe11b7bf perf record: Implement --affinity=node|cpu option
Implement --affinity=node|cpu option for the record mode defaulting
to system affinity mask bouncing.

Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/083f5422-ece9-10dd-8305-bf59c860f10f@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-11 12:32:21 -03:00
Jonathan Neuschäfer
2c71d305ca docs: process: Remove outdated info about -git patches
As can be seen by clicking around the timeline on web.archive.org[1],
there were no -git patches/tarballs on kernel.org since release 3.1.

[1]: https://web.archive.org/web/20111103073843/http://www.kernel.org/

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-02-11 08:30:06 -07:00
Randy Dunlap
c9389ad814 Documentation: fix lg-laptop.rst warnings
Fix markup warnings by inserting blank lines.
Also correct one typo.

Documentation/laptops/lg-laptop.rst:2: WARNING: Explicit markup ends without a blank line; unexpected unindent.
Documentation/laptops/lg-laptop.rst:16: WARNING: Unexpected indentation.
Documentation/laptops/lg-laptop.rst:17: WARNING: Block quote ends without a blank line; unexpected unindent.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Matan Ziv-Av <matan@svgalib.org>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-02-11 08:27:47 -07:00
Christoph Hellwig
9a065fa8f7 Documentation/DMA-ISA-LPC: fix an incorrect reference
AFAIK we never had a isa_virt_to_phys, it always was
isa_virt_to_bus.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-02-11 08:23:07 -07:00
Aleksei Zakharov
fbd72127c9 block: avoid setting none scheduler if it's already none
There's no reason to freeze queue and remove scheduler
if there's no scheduler already.

Signed-off-by: Aleksei Zakharov <zakharov.a.g@yandex.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-11 08:21:40 -07:00
Aleksei Zakharov
b7143fe67b block: avoid setting wbt_lat_usec to current value
There's no reason to set wbt min lat and freeze request queue
if current value is the same.

Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Aleksei Zakharov <zakharov.a.g@yandex.ru>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-11 08:20:14 -07:00
Heiner Litz
0586942f03 lightnvm: pblk: fix race condition on GC
This patch fixes a race condition where a write is mapped to the last
sectors of a line. The write is synced to the device but the L2P is not
updated yet. When the line is garbage collected before the L2P update
is performed, the sectors are ignored by the GC logic and the line is
freed before all sectors are moved. When the L2P is finally updated, it
contains a mapping to a freed line, subsequent reads of the
corresponding LBAs fail.

This patch introduces a per line counter specifying the number of
sectors that are synced to the device but have not been updated in the
L2P. Lines with a counter of greater than zero will not be selected
for GC.

Signed-off-by: Heiner Litz <hlitz@ucsc.edu>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-11 08:18:08 -07:00
Javier González
b4cdc4260e lightnvm: pblk: prevent stall due to wb threshold
In order to respect mw_cuinits, pblk's write buffer maintains a
backpointer to protect data not yet persisted; when writing to the write
buffer, this backpointer defines a threshold that pblk's rate-limiter
enforces.

On small PU configurations, the following scenarios might take place: (i)
the threshold is larger than the write buffer and (ii) the threshold is
smaller than the write buffer, but larger than the maximun allowed
split bio - 256KB at this moment (Note that writes are not always
split - we only do this when we the size of the buffer is smaller
than the buffer). In both cases, pblk's rate-limiter prevents the I/O to
be written to the buffer, thus stalling.

This patch fixes the original backpointer implementation by considering
the threshold both on buffer creation and on the rate-limiters path,
when bio_split is triggered (case (ii) above).

Fixes: 766c8ceb16 ("lightnvm: pblk: guarantee that backpointer is respected on writer stall")
Signed-off-by: Javier González <javier@javigon.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-11 08:18:08 -07:00
Hans Holmberg
aa8759d80a lightnvm: pblk: extend line wp balance check
pblk stripes writes of minimal write size across all non-offline chunks
in a line, which means that the maximum write pointer delta should not
exceed the minimal write size.

Extend the line write pointer balance check to cover this case, and
ignore the offline chunk wps.

This will render us a warning during recovery if something unexpected
has happened to the chunk write pointers (i.e. powerloss,  a spurious
chunk reset, ..).

Reported-by: Zhoujie Wu <zjwu@marvell.com>
Tested-by: Zhoujie Wu <zjwu@marvell.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-11 08:18:07 -07:00
Masahiro Yamada
b7fce8f79d lightnvm: pblk: fix TRACE_INCLUDE_PATH
As the comment block in include/trace/define_trace.h says,
TRACE_INCLUDE_PATH should be a relative path to the define_trace.h

../../drivers/lightnvm is the correct relative path.

../../../drivers/lightnvm is working by coincidence because the top
Makefile adds -I$(srctree)/arch/$(SRCARCH)/include as a header
search path, but we should not rely on it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-11 08:18:07 -07:00
Andy Shevchenko
7e0a0847ed lightnvm: pblk: Switch to use new generic UUID API
There are new types and helpers that are supposed to be used in new code.

As a preparation to get rid of legacy types and API functions do
the conversion here.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-11 08:18:07 -07:00
Andy Shevchenko
e74ecf63ef lightnvm: Use u64 instead of __le64 for CPU visible side
Sparse complains about using strict data types:

drivers/lightnvm/pblk-read.c:254:43: warning: incorrect type in assignment (different base types)
drivers/lightnvm/pblk-read.c:254:43:    expected restricted __le64 <noident>
drivers/lightnvm/pblk-read.c:254:43:    got unsigned long long [unsigned] [usertype] <noident>
drivers/lightnvm/pblk-read.c:255:29: warning: cast from restricted __le64
drivers/lightnvm/pblk-read.c:268:29: warning: cast from restricted __le64
drivers/lightnvm/pblk-read.c:328:41: warning: incorrect type in assignment (different base types)
drivers/lightnvm/pblk-read.c:328:41:    expected restricted __le64 <noident>
drivers/lightnvm/pblk-read.c:328:41:    got unsigned long long [unsigned] [usertype] <noident>

In the code it seems explicit that lba_list_mem and lba_list_media members
of struct pblk_pr_ctx are used on CPU side, which means they should not be
of strict types.

Change types of lba_list_mem and lba_list_media members to be u64.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Javier González <javier@javigon.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-11 08:18:07 -07:00
Hans Holmberg
6916cf5426 lightnvm: pblk: use vfree to free metadata on error path
As chunk metadata is allocated using vmalloc, we need to free it
using vfree.

Fixes: 090ee26fd5 ("lightnvm: use internal allocation for chunk log page")
Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-11 08:18:07 -07:00
Hans Holmberg
f9324980d7 lightnvm: pblk: stop taking the free lock in in pblk_lines_free
pblk_line_meta_free might sleep (it can end up calling vfree, depending
on how we allocate lba lists), and this can lead to a BUG()
if we wake up on a different cpu and release the lock.

As there is no point of grabbing the free lock when pblk has shut down,
remove the lock.

Signed-off-by: Hans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: Matias Bjørling <mb@lightnvm.io>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-02-11 08:18:07 -07:00
Tibor Billes
05b71f6ffd cgroup: add documentation for pids.events file
cgroup: add documentation for pids.events file

Document the event counters file for pid cgroups.

Signed-off-by: Tibor Billes <tbilles@gmx.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2019-02-11 07:17:59 -08:00
Thomas Gleixner
bf7fbeeae6 module: Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity
The original MODULE_LICENSE string for kernel modules licensed under the
GPL v2 (only / or later) was simply "GPL", which was - and still is -
completely sufficient for the purpose of module loading and checking
whether the module is free software or proprietary.

In January 2003 this was changed with commit 3344ea3ad4b7 ("[PATCH]
MODULE_LICENSE and EXPORT_SYMBOL_GPL support"). This commit can be found in
the history git repository which holds the 1:1 import of Linus' bitkeeper
repository:

  https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=3344ea3ad4b7c302c846a680dbaeedf96ed45c02

The main intention of the patch was to refuse linking proprietary modules
against symbols exported with EXPORT_SYMBOL_GPL() at module load time.

As a completely undocumented side effect it also introduced the distinction
between "GPL" and "GPL v2" MODULE_LICENSE() strings:

 *      "GPL"                           [GNU Public License v2 or later]
 *      "GPL v2"                        [GNU Public License v2]
 *      "GPL and additional rights"     [GNU Public License v2 rights and more]
 *      "Dual BSD/GPL"                  [GNU Public License v2
 *                                       or BSD license choice]
 *      "Dual MPL/GPL"                  [GNU Public License v2
 *                                       or Mozilla license choice]

This distinction was and still is wrong in several aspects:

 1) It broke all modules which were using the "GPL" string in the
    MODULE_LICENSE() already and were licensed under GPL v2 only.

    A quick license scan over the tree at that time shows that at least 480
    out of 1484 modules have been affected by this change back then. The
    number is probably way higher as this was just a quick check for
    clearly identifiable license information.

    There was exactly ONE instance of a "GPL v2" module license string in
    the kernel back then - drivers/net/tulip/xircom_tulip_cb.c which
    otherwise had no license information at all. There is no indication
    that the change above is any way related to this driver. The change
    happend with the 2.4.11 release which was on Oct. 9 2001 - so quite
    some time before the above commit. Unfortunately there is no trace on
    the intertubes to any discussion of this.

 2) The dual licensed strings became ill defined as well because following
    the "GPL" vs. "GPL v2" distinction all dual licensed (or additional
    rights) MODULE_LICENSE strings would either require those dual licensed
    modules to be licensed under GPL v2 or later or just be unspecified for
    the dual licensing case. Neither choice is coherent with the GPL
    distinction.

Due to the lack of a proper changelog and no real discussion on the patch
submission other than a few implementation details, it's completely unclear
why this distinction was introduced at all. Other than the comment in the
module header file exists no documentation for this at all.

From a license compliance and license scanning POV this distinction is a
total nightmare.

As of 5.0-rc2 2873 out of 9200 instances of MODULE_LICENSE() strings are
conflicting with the actual license in the source code (either SPDX or
license boilerplate/reference). A comparison between the scan of the
history tree and a scan of current Linus tree shows to the extent that the
git rename detection over Linus tree grafted with the history tree is
halfways complete that almost none of the files which got broken in 2003
have been cleaned up vs. the MODULE_LICENSE string. So subtracting those
480 known instances from the conflicting 2800 of today more than 25% of the
module authors got it wrong and it's a high propability that a large
portion of the rest just got it right by chance.

There is no value for the module loader to convey the detailed license
information as the only decision to be made is whether the module is free
software or not.

The "and additional rights", "BSD" and "MPL" strings are not conclusive
license information either. So there is no point in trying to make the GPL
part conclusive and exact. As shown above it's already non conclusive for
dual licensing and incoherent with a large portion of the module source.

As an unintended side effect this distinction causes a major headache for
license compliance, license scanners and the ongoing effort to clean up the
license mess of the kernel.

Therefore remove the well meant, but ill defined, distinction between "GPL"
and "GPL v2" and document that:

  - "GPL" and "GPL v2" both express that the module is licensed under GPLv2
    (without a distinction of 'only' and 'or later') and is therefore kernel
    license compliant.

  - None of the MODULE_LICENSE strings can be used for expressing or
    determining the exact license

  - Their sole purpose is to decide whether the module is free software or
    not.

Add a MODULE_LICENSE subsection to the license rule documentation as well.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Philippe Ombredanne <pombredanne@nexb.com>
Acked-by: Joe Perches <joe@perches.com>
[jc: Did s/merily/merely/ ]
Acked-by: Jessica Yu <jeyu@kernel.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2019-02-11 08:17:43 -07:00
Ilan Peer
6157ca0d6b mac80211: Fix Tx aggregation session tear down with ITXQs
When mac80211 requests the low level driver to stop an ongoing
Tx aggregation, the low level driver is expected to call
ieee80211_stop_tx_ba_cb_irqsafe() to indicate that it is ready
to stop the session. The callback in turn schedules a worker
to complete the session tear down, which in turn also handles
the relevant state for the intermediate Tx queue.

However, as this flow in asynchronous, the intermediate queue
should be stopped and not continue servicing frames, as in
such a case frames that are dequeued would be marked as part
of an aggregation, although the aggregation is already been
stopped.

Fix this by stopping the intermediate Tx queue, before
calling the low level driver to stop the Tx aggregation.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 15:50:56 +01:00
Johannes Berg
1fc9b72533 cfg80211: prevent speculation on cfg80211_classify8021d() return
It's possible that the caller of cfg80211_classify8021d() uses the
value to index an array, like mac80211 in ieee80211_downgrade_queue().
Prevent speculation on the return value.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 15:50:56 +01:00
Johannes Berg
ff1bab1ba1 cfg80211: pmsr: record netlink port ID
Without recording the netlink port ID, we cannot return the
results or complete messages to userspace, nor will we be
able to abort if the socket is closed, so clearly we need
to fill the value.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 15:50:56 +01:00
Aviya Erenfeld
ea18709a6f nl80211: Fix FTM per burst maximum value
Fix FTM per burst maximum value from 15 to 31
(The maximal bits that represents that number in the frame
is 5 hence a maximal value of 31)

Signed-off-by: Aviya Erenfeld <aviya.erenfeld@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 15:50:56 +01:00
Johannes Berg
4926b51bfa mac80211: call drv_ibss_join() on restart
If a driver does any significant activity in its ibss_join method,
then it will very well expect that to be called during restart,
before any stations are added. Do that.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 15:50:56 +01:00
Johannes Berg
e646a0257b cfg80211: restore regulatory without calling userspace
Jouni reports that in some cases it is possible that getting
disconnected (or stopping AP, after previous patches) results
in further operations hitting the window within the regulatory
core restoring the regdomain to the defaults. The reason for
this is that we have to call out to CRDA or otherwise do some
asynchronous work, and thus can't do the restore atomically.

However, we've previously seen all the data we need to do the
restore, so we can hang on to that data and use it later for
the restore. This makes the whole thing happen within a single
locked section and thus atomic.

However, we can't *always* do this - there are unfortunately
cases where the restore needs to re-request, because this is
also used (abused?) as an error recovery process, so make the
new behaviour optional and only use it when doing a regular
restore as described above.

Reported-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11 15:46:29 +01:00
Mika Westerberg
85b0cae89d PCI: Blacklist power management of Gigabyte X299 DESIGNARE EX PCIe ports
Gigabyte X299 DESIGNARE EX motherboard has one PCIe root port that is
connected to an Alpine Ridge Thunderbolt controller.  This port has slot
implemented bit set in the config space but other than that it is not
hotplug capable in the sense we are expecting in Linux (it has
dev->is_hotplug_bridge set to 0):

  00:1c.4 PCI bridge: Intel Corporation 200 Series PCH PCI Express Root Port #5
    Bus: primary=00, secondary=05, subordinate=46, sec-latency=0
    Memory behind bridge: 78000000-8fffffff [size=384M]
    Prefetchable memory behind bridge: 00003800f8000000-00003800ffffffff [size=128M]
    ...
    Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
    ...
      SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
	      Slot #8, PowerLimit 25.000W; Interlock- NoCompl+
      SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
	      Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
      SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
	      Changed: MRL- PresDet+ LinkState+

This system is using ACPI based hotplug to notify the OS that it needs to
rescan the PCI bus (ACPI hotplug).

If there is nothing connected in any of the Thunderbolt ports the root port
will not have any runtime PM active children and is thus automatically
runtime suspended pretty soon after boot by PCI PM core.  Now, when a
device is connected the BIOS SMI handler responsible for enumerating newly
added devices is not able to find anything because the port is in D3.

Prevent this from happening by blacklisting PCI power management of this
particular Gigabyte system.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=202031
Reported-by: Kedar A Dongre <kedar.a.dongre@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-02-11 08:44:33 -06:00
Logan Gunthorpe
c59666bb32 NTB: ntb_transport: Ensure the destination buffer is mapped for TX DMA
Presently, when ntb_transport is used with DMA and the IOMMU turned on,
it fails with errors from the IOMMU such as:

  DMAR: DRHD: handling fault status reg 202
  DMAR: [DMA Write] Request device [00:04.0] fault addr
	381fc0340000 [fault reason 05] PTE Write access is not set

This is because ntb_transport does not map the BAR space with the IOMMU.

To fix this, we map the entire MW region for each QP after we assign
the DMA channel. This prevents needing an extra DMA map in the fast
path.

Link: https://lore.kernel.org/linux-pci/499934e7-3734-1aee-37dd-b42a5d2a2608@intel.com/
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-02-11 09:26:30 -05:00
Joey Zhang
9143595a7e NTB: ntb_transport: Free MWs in ntb_transport_link_cleanup()
If NTB peer host crashes or reboots, the NTB transport link will be
down and the MWs of NTB transport will be invalid. But the
ntb_transport_link_cleanup() does not free these invalid MWs. When
the NTB peer host is recovered later, NTB transport link will be
up and the ntb_set_mw() will not reset up MWs. Because the MWs of
NTB transport are invalid, the NTB transport will not work.

We can fix it by freeing MWs when NTB transport link is down, then
the ntb_set_mw() will reset up MWs when NTB transport link is up.

Signed-off-by: Joey Zhang <joey.zhang@microchip.com>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
2019-02-11 09:26:05 -05:00
Christoph Hellwig
e26bdb0131 fotg210-udc: pass struct device to DMA API functions
The DMA API generally relies on a struct device to work properly, and
only barely works without one for legacy reasons.  Pass the easily
available struct device from the platform_device to remedy this.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-02-11 15:30:14 +02:00
Christoph Hellwig
8c7ffa5ebd fotg210-udc: remove a bogus dma_sync_single_for_device call
dma_map_single already transfers ownership to the device.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2019-02-11 15:30:14 +02:00
Aubrey Li
2f7726f955 x86/fpu: Track AVX-512 usage of tasks
User space tools which do automated task placement need information
about AVX-512 usage of tasks, because AVX-512 usage could cause core
turbo frequency drop and impact the running task on the sibling CPU.

The XSAVE hardware structure has bits that indicate when valid state
is present in registers unique to AVX-512 use.  Use these bits to
indicate when AVX-512 has been in use and add per-task AVX-512 state
timestamp tracking to context switch.

Well-written AVX-512 applications are expected to clear the AVX-512
state when not actively using AVX-512 registers, so the tracking
mechanism is imprecise and can theoretically miss AVX-512 usage during
context switch. But it has been measured to be precise enough to be
useful under real-world workloads like tensorflow and linpack.

If higher precision is required, suggest user space tools to use the
PMU-based mechanisms in combination.

Signed-off-by: Aubrey Li <aubrey.li@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: aubrey.li@intel.com
Link: http://lkml.kernel.org/r/20190117183822.31333-1-aubrey.li@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-11 14:28:56 +01:00
Anders Roxell
b14e77f89a locking/atomics: Change 'fold' to 'grep'
Some distibutions and build systems doesn't include 'fold' from
coreutils default.

.../scripts/atomic/atomic-tbl.sh: line 183: fold: command not found

Rework to use 'grep' instead of 'fold' to use a dependency that is
already used a lot in the kernel.

[Mark: rework commit message]

Suggested-by: Will Deacon <will.deacon@arm.com>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: boqun.feng@gmail.com
Cc: linux-kernel@vger.kernel.rg
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-11 14:27:33 +01:00
Ingo Molnar
41b8687191 Merge branch 'locking/atomics' into locking/core, to pick up WIP commits
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-02-11 14:27:05 +01:00
Takeshi Kihara
79dbbdbecc pinctrl: sh-pfc: r8a77965: Add DRIF pins, groups and functions
This patch adds DRIF{0,1,2,3} pins, groups and functions to the R8A77965
SoC.

Based on a similar patch of the R8A7796 PFC driver
by Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com>.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-11 14:16:11 +01:00
Takeshi Kihara
729257d674 pinctrl: sh-pfc: r8a77965: Add TMU pins, groups and functions
This patch adds TMU TCLK{1,2} pins, groups and functions to
the R8A77965 SoC.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2019-02-11 14:16:11 +01:00
Geert Uytterhoeven
5e8588c86d pinctrl: sh-pfc: Validate fixed-size field widths at build time
Add a build-time check, to ensure the register and field widths in
descriptors for config registers with fixed-width fields are sane.
This helps catching bugs early.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11 14:11:35 +01:00
Geert Uytterhoeven
0e6e448bdc pinctrl: sh-pfc: sh73a0: Fix fsic_spdif pin groups
There are two pin groups for the FSIC SPDIF signal, but the FSIC pin
group array lists only one, and it refers to a nonexistent group.

Fixes: 2ecd4154c9 ("sh-pfc: sh73a0: Add FSI pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11 14:11:25 +01:00
Geert Uytterhoeven
b9fd50488b pinctrl: sh-pfc: r8a7792: Fix vin1_data18_b pin group
The vin1_data18_b pin group itself is present, but it is not listed in
the VIN1 pin group array, and thus cannot be selected.

Fixes: 7dd74bb1f0 ("pinctrl: sh-pfc: r8a7792: Add VIN pin groups")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11 14:11:14 +01:00
Geert Uytterhoeven
a4b0350047 pinctrl: sh-pfc: r8a7791: Fix scifb2_data_c pin group
The entry for "scifb2_data_c" in the SCIFB2 pin group array contains a
typo, thus the group cannot be selected.

Fixes: 5088451962 ("pinctrl: sh-pfc: r8a7791 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2019-02-11 14:11:02 +01:00