While it was possible to configure the PCIe1 Wakeup pin, it was missing
in the bidding, let's document it.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This is a cleanup and fix of the patch by Ken Ma <make@marvell.com>.
Fix the mpp definitions according to newest revision of the
specification:
- northbridge:
fix pmic1 gpio number to 7
fix pmic0 gpio number to 6
- southbridge
split pcie1 group bit mask to BIT(5) and BIT(9)
fix ptp group bit mask to BIT(11) | BIT(12) | BIT(13)
add smi group with bit mask BIT(4)
[gregory: split the pcie group in 2, as at hardware level they can be
configured separately]
Signed-off-by: Marek Behún <marek.behun@nic.cz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
MX8QM contains a system controller that is responsible for controlling
the pad setting of the IPs that are present. Communication between the
host processor running an OS and the system controller happens through
a SCU protocol. This patch adds the SCU based MX8QM pinctrl driver.
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Stefan Agner <stefan@agner.ch>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes the following sparse warning:
drivers/gpio/gpio-pca953x.c:292:28: warning:
symbol 'pca953x_i2c_regmap' was not declared. Should it be static?
Fixes: 4942723276 ("gpio: pca953x: Perform basic regmap conversion")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch also adds the iommu-map property in fsl-mc node, so
that fsl-mc can use iommu.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add num-viewport property for PCIe DT nodes to specify how many
viewports are implemented.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add num-viewport property for PCIe DT nodes to specify how many
viewports are implemented.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When specifying weim child devices, there is a risk that more than
one timing setting is specified for the same chip select.
The driver cannot support such a configuration.
In case of conflict, this patch will print a warning to the log,
and will ignore the child node in question.
In this example, node acme@1 will be ignored, as it tries to modify
timing settings for CS0:
&weim {
acme@0 {
compatible = "acme,whatever";
reg = <0 0 0x100>;
fsl,weim-cs-timing = <something>;
};
acme@1 {
compatible = "acme,whatnot";
reg = <0 0x500 0x100>;
fsl,weim-cs-timing = <something else>;
};
};
However in this example, the driver will be happy:
&weim {
acme@0 {
compatible = "acme,whatever";
reg = <0 0 0x100>;
fsl,weim-cs-timing = <something>;
};
acme@1 {
compatible = "acme,whatnot";
reg = <0 0x500 0x100>;
fsl,weim-cs-timing = <something>;
};
};
Signed-off-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Ensure that timing values for the child node are applied to
all chip selects in the child's address ranges.
Note that this does not support multiple timing settings per
child; this can be added in the future if required.
Example:
&weim {
acme@0 {
compatible = "acme,whatever";
reg = <0 0 0x100>, <0 0x400000 0x800>,
<1 0x400000 0x800>;
fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100
0x00000000 0xa0000240 0x00000000>;
};
};
Signed-off-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The imx-weim driver was patched to allow correct WEIM configuration
when multiple address ranges are used in a child node.
Update the dt-bindings to reflect this.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sven Van Asbroeck <TheSven73@googlemail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some power domains handled by the GPCv2 driver need to enable the clocks
for devies inside the domain, so that the reset propagation and proper
power-up sequencing happens. Handle them in the same way as on GPCv1.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some of the i.MX8MQ domains have an additional control bit in the PU
handshake (HSK) register. Documentation about this bit is a bit sparse
at the moment, but it seems that it controls a power-down request to
the AMBA domain bridge (ADB-400) attached to those domains.
As the documentation doesn't desribe the usage of this bit yet, handle
it in the same way as done in the ATF implementation.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
perf trace:
Ravi Bangoria:
- Rework PowerPC syscall table generation, now using a .tbl file just like
x86_64 and S/390, also silencing a tools build warning about headers out of
sync with the kernel sources.
tools include uapi:
Arnaldo Carvalho de Melo:
- Sync linux/if_link.h copy with the kernel sources, silencing a build warning.
perf top:
Arnaldo Carvalho de Melo:
- Add 'arch_cpu_idle' to the list of kernel idle symbols, noticed on a Orange
Pi Zero ARM board, just like with other symbols in other arches.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXDd1iAAKCRCyPKLppCJ+
J2G4AP9Ap7B1GKHJK1f9niTjTa249SKZtpXSKSkMfFJNjQAT+wD8C0+MrmjhywVv
FoiaCMn/KPNNslPSXwhzrG3DXDSqIQg=
=9St5
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo-5.0-20190110' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core fixes and improvements from Arnaldo Carvalho de Melo:
perf trace:
Ravi Bangoria:
- Rework PowerPC syscall table generation, now using a .tbl file just like
x86_64 and S/390, also silencing a tools build warning about headers out of
sync with the kernel sources.
tools include uapi:
Arnaldo Carvalho de Melo:
- Sync linux/if_link.h copy with the kernel sources, silencing a build warning.
perf top:
Arnaldo Carvalho de Melo:
- Add 'arch_cpu_idle' to the list of kernel idle symbols, noticed on a Orange
Pi Zero ARM board, just like with other symbols in other arches.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
When a fan is controlled via linear fallback without cstate, we
shouldn't stop polling. Otherwise it won't be adjusted again and
keeps running at an initial crazy pace.
Fixes: 800efb4c28 ("drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios")
Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1103356
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107447
Reported-by: Thomas Blume <thomas.blume@suse.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Martin Peres <martin.peres@free.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
It took me a while to notice the bug where the adiantum template left
crypto_spawn::inst == NULL, because this only caused problems in certain
cases where algorithms are dynamically loaded/unloaded.
More improvements are needed, but for now make crypto_init_spawn()
reject this case and WARN(), so this type of bug will be noticed
immediately in the future.
Note: I checked all callers and the adiantum template was the only place
that had this wrong. So this WARN shouldn't trigger anymore.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Now that all "blkcipher" templates have been converted to "skcipher",
crypto_alloc_instance() is no longer used. And it's not useful any
longer as it creates an old-style weakly typed instance rather than a
new-style strongly typed instance. So remove it, and now that the name
is freed up rename crypto_alloc_instance2() to crypto_alloc_instance().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the "ecb-cipher_null" algorithm from the deprecated "blkcipher"
API to the "skcipher" API.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the "ecb(arc4)" algorithm from the deprecated "blkcipher" API to
the "skcipher" API.
(Note that this is really a stream cipher and not a block cipher in ECB
mode as the name implies, but that's a problem for another day...)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The PCBC template just wraps a single block cipher algorithm, so
simplify it by converting it to use skcipher_alloc_instance_simple().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Following commit 944585a64f ("crypto: x86/aes-ni - remove special
handling of AES in PCBC mode"), it's no longer needed for the PCBC
template to support wrapping a cipher that has the CRYPTO_ALG_INTERNAL
flag set. Thus, remove this now-unused functionality to make PCBC
consistent with the other single block cipher templates.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The OFB template just wraps a single block cipher algorithm, so simplify
it by converting it to use skcipher_alloc_instance_simple().
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the keywrap template from the deprecated "blkcipher" API to the
"skcipher" API, taking advantage of skcipher_alloc_instance_simple() to
simplify it considerably.
Cc: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the ECB template from the deprecated "blkcipher" API to the
"skcipher" API, taking advantage of skcipher_alloc_instance_simple() to
simplify it considerably.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the CTR template from the deprecated "blkcipher" API to the
"skcipher" API, taking advantage of skcipher_alloc_instance_simple() to
simplify it considerably.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CFB template just wraps a single block cipher algorithm, so simplify
it by converting it to use skcipher_alloc_instance_simple().
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CBC template just wraps a single block cipher algorithm, so simplify
it by converting it to use skcipher_alloc_instance_simple().
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The majority of skcipher templates (including both the existing ones and
the ones remaining to be converted from the "blkcipher" API) just wrap a
single block cipher algorithm. This includes cbc, cfb, ctr, ecb, kw,
ofb, and pcbc. Add a helper function skcipher_alloc_instance_simple()
that handles allocating an skcipher instance for this common case.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The memcpy()s in the PCBC implementation use walk->iv as both the source
and destination, which has undefined behavior. These memcpy()'s are
actually unneeded, because walk->iv is already used to hold the previous
plaintext block XOR'd with the previous ciphertext block. Thus,
walk->iv is already updated to its final value.
So remove the broken and unnecessary memcpy()s.
Fixes: 91652be5d1 ("[CRYPTO] pcbc: Add Propagated CBC template")
Cc: <stable@vger.kernel.org> # v2.6.21+
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix multiple bugs in the OFB implementation:
1. It stored the per-request state 'cnt' in the tfm context, which can be
used by multiple threads concurrently (e.g. via AF_ALG).
2. It didn't support messages not a multiple of the block cipher size,
despite being a stream cipher.
3. It didn't set cra_blocksize to 1 to indicate it is a stream cipher.
To fix these, set the 'chunksize' property to the cipher block size to
guarantee that when walking through the scatterlist, a partial block can
only occur at the end. Then change the implementation to XOR a block at
a time at first, then XOR the partial block at the end if needed. This
is the same way CTR and CFB are implemented. As a bonus, this also
improves performance in most cases over the current approach.
Fixes: e497c51896 ("crypto: ofb - add output feedback mode")
Cc: <stable@vger.kernel.org> # v4.20+
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The memcpy() in crypto_cfb_decrypt_inplace() uses walk->iv as both the
source and destination, which has undefined behavior. It is unneeded
because walk->iv is already used to hold the previous ciphertext block;
thus, walk->iv is already updated to its final value. So, remove it.
Also, note that in-place decryption is the only case where the previous
ciphertext block is not directly available. Therefore, as a related
cleanup I also updated crypto_cfb_encrypt_segment() to directly use the
previous ciphertext block rather than save it into walk->iv. This makes
it consistent with in-place encryption and out-of-place decryption; now
only in-place decryption is different, because it has to be.
Fixes: a7d85e06ed ("crypto: cfb - add support for Cipher FeedBack mode")
Cc: <stable@vger.kernel.org> # v4.17+
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Like some other block cipher mode implementations, the CFB
implementation assumes that while walking through the scatterlist, a
partial block does not occur until the end. But the walk is incorrectly
being done with a blocksize of 1, as 'cra_blocksize' is set to 1 (since
CFB is a stream cipher) but no 'chunksize' is set. This bug causes
incorrect encryption/decryption for some scatterlist layouts.
Fix it by setting the 'chunksize'. Also extend the CFB test vectors to
cover this bug as well as cases where the message length is not a
multiple of the block size.
Fixes: a7d85e06ed ("crypto: cfb - add support for Cipher FeedBack mode")
Cc: <stable@vger.kernel.org> # v4.17+
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A statement is indented with spaces and not indented enough, fix this
replacing spaces with a tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/crypto/chelsio/chcr_algo.c: In function 'chcr_device_init':
drivers/crypto/chelsio/chcr_algo.c:1371:18: warning:
variable 'adap' set but not used [-Wunused-but-set-variable]
It not used since commit a1c6fd4308 ("crypto: chelsio - Update ntx queue
received from cxgb4")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
set_msg_len may fails with -EOVERFLOW, It should be propagate
to upstream.
Fixes: 2debd3325e ("crypto: chcr - Add AEAD algos.")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Test cookie return by dmaengine_submit() and return error if any.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This patch adds support for crypto4xx's ANSI X9.17 Annex C compliant
pseudo random number generator which provides a pseudo random source
for the purpose of generating Initialization Vectors (IV's) for AES
algorithms to the Packet Engine and other pseudo random number
requirements.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add xcbc(aes) offloading support.
Due to xcbc algorithm design and HW implementation in CAAM,
driver must still have some bytes to send to the crypto engine when
ahash_final() is called - such that HW correctly uses either K2 or K3
for the last block.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
For keyed hash algorithms, shared descriptors are currently generated
twice:
-at tfm initialization time, in cra_init() callback
-in setkey() callback
Since it's mandatory to call setkey() for keyed algorithms, drop the
generation in cra_init().
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix error reporting when preparation of an hmac algorithm
for registration fails: print the hmac algorithm name, not the unkeyed
hash algorithm name.
Signed-off-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Correct copyright dates for files that have had code added
to them in 2018.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fixes gcc '-Wunused-but-set-variable' warning:
drivers/crypto/chelsio/chtls/chtls_io.c: In function 'csk_wait_memory':
drivers/crypto/chelsio/chtls/chtls_io.c:925:6: warning:
variable 'sndbuf' set but not used [-Wunused-but-set-variable]
drivers/crypto/chelsio/chtls/chtls_io.c: In function 'chtls_pt_recvmsg':
drivers/crypto/chelsio/chtls/chtls_io.c:1411:6: warning:
variable 'request' set but not used [-Wunused-but-set-variable]
drivers/crypto/chelsio/chtls/chtls_io.c:1407:18: warning:
variable 'adap' set but not used [-Wunused-but-set-variable]
drivers/crypto/chelsio/chtls/chtls_io.c: In function 'chtls_recvmsg':
drivers/crypto/chelsio/chtls/chtls_io.c:1701:6: warning:
variable 'request' set but not used [-Wunused-but-set-variable]
drivers/crypto/chelsio/chtls/chtls_io.c:1697:20: warning:
variable 'hws' set but not used [-Wunused-but-set-variable]
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
There are several issues with symbols shared b/w:
-caam/jr and caam/qi drivers on one hand
-caam/qi2 driver on the other hand
Commit 52813ab249 ("crypto: caam/qi2 - avoid double export") fixed
some of them, however compilation still fails for CRYPTO_DEV_FSL_CAAM=m
and CRYPTO_DEV_FSL_DPAA2_CAAM=y.
Another issue is related to dependency cycles reported by depmod when
CRYPTO_DEV_FSL_CAAM=n and CRYPTO_DEV_FSL_DPAA2_CAAM=m, as mentioned in
82c7b351be ("Revert "arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO"")
To fix all these, move the symbols shared by these drivers in a common
location. The only existing possibility is error.c file (note that naming
doesn't help and should probably change).
Fixes: 52813ab249 ("crypto: caam/qi2 - avoid double export")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>