Commit graph

982,081 commits

Author SHA1 Message Date
Sara Sharon
a50e5fb8db mac80211: fix a kernel panic when TXing after TXQ teardown
Recently TXQ teardown was moved earlier in ieee80211_unregister_hw(),
to avoid a use-after-free of the netdev data. However, interfaces
aren't fully removed at the point, and cfg80211_shutdown_all_interfaces
can for example, TX a deauth frame. Move the TXQ teardown to the
point between cfg80211_shutdown_all_interfaces and the free of
netdev queues, so we can be sure they are torn down before netdev
is freed, but after there is no ongoing TX.

Fixes: 77cfaf52ec ("mac80211: Run TXQ teardown code before de-registering interfaces")
Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 13:03:32 +01:00
Lorenzo Pieralisi
ffeccc22d5 MAINTAINERS: Remove Jianguo Sun from HiSilicon STB DWC entry
Jianguo Sun's email address reported in MAINTAINERS is not active any
longer, remove it from the DWC HiSilicon STB entry.

Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
2018-12-18 12:01:17 +00:00
Stephen Warren
6d6b05e3d5 PCI: dwc: Don't hard-code DBI/ATU offset
The DWC PCIe core contains various separate register spaces: DBI, DBI2,
ATU, DMA, etc. The relationship between the addresses of these register
spaces is entirely determined by the implementation of the IP block, not
by the IP block design itself. Hence, the DWC driver must not make
assumptions that one register space can be accessed at a fixed offset from
any other register space. To avoid such assumptions, introduce an
explicit/separate register pointer for the ATU register space. In
particular, the current assumption is not valid for NVIDIA's T194 SoC.

The ATU register space is only used on systems that require unrolled ATU
access. This property is detected at run-time for host controllers, and
when this is detected, this patch provides a default value for atu_base
that matches the previous assumption re: register layout. An alternative
would be to update all drivers for HW that requires unrolled access to
explicitly set atu_base. However, it's hard to tell which drivers would
require atu_base to be set. The unrolled property is not detected for
endpoint systems, and so any endpoint driver that requires unrolled access
must explicitly set the iatu_unroll_enabled flag (none do at present), and
so a check is added to require the driver to also set atu_base while at
it.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Acked-by: Vidya Sagar <vidyas@nvidia.com>
2018-12-18 12:01:17 +00:00
Leonard Crestez
9e56f0df36 PCI: imx: Add imx6sx suspend/resume support
Enable PCI suspend/resume support on imx6sx SOCs. This is similar to
imx7d with a few differences:

* The PM_Turn_Off bit is exposed through an IOMUX GPR, like all other
pcie control bits on 6sx.
* The pcie_inbound_axi clk needs to be turned off in suspend. On resume
it is restored via resume -> deassert_core_reset -> enable_ref_clk.

Most of the resume logic is shared with the initial reset after probe.

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: Lucas Stach <l.stach@pengutronix.de>
2018-12-18 12:01:16 +00:00
Baruch Siach
3d71746c42 PCI: armada8k: Add support for gpio controlled reset signal
Add support for the gpio reset signal binding as described in the
designware-pcie.txt DT binding document. Both the documented
'reset-gpio' property name and the more standard 'reset-gpios' name are
supported.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
2018-12-18 12:01:16 +00:00
Trent Piepho
a3ed144652 PCI: dwc: Adjust Kconfig to allow IMX6 PCIe host on IMX7
The IMX6 PCI-e host driver also supports the IMX7d. However, the
Kconfig dependencies of the driver prevented it from being enabled
unless the kernel was built with both IMX6 and IMX7 support.

It works fine to build with only IMX7 support enabled therefore
adjust the Kconfig entry to allow this configuration.

Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
2018-12-18 12:01:16 +00:00
Stefan Agner
edfd39f0a4 PCI: dwc: layerscape: Constify driver data
Constify driver data since they do not get changed at runtime.

Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-12-18 12:01:15 +00:00
Leonard Crestez
3f7cceeab8 PCI: imx: Add multi-pd support
On some chips the PCIe and PCIE_PHY blocks are in separate power domains
which can be power-gated independently. The PCI driver needs to handle
this by keeping both domain active.

This is intended for imx6sx where PCIe is in DISPLAY and PCIE_PHY in
its own domain. Defining the DISPLAY domain requires a way for PCIe to
keep it active or it will break when displays are off.

The power-domains on imx6sx are meant to look like this:
	power-domains = <&pd_disp>, <&pd_pci>;
	power-domain-names = "pcie", "pcie_phy";

Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>
[lorenzo.pieralisi@arm.com: updated commit log]
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-18 12:01:08 +00:00
YueHaibing
07daef8b41 ntp: Remove duplicated include
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <john.stultz@linaro.org>
Cc: <sboyd@kernel.org>
Link: https://lkml.kernel.org/r/20181209062225.4344-1-yuehaibing@huawei.com
2018-12-18 12:59:33 +01:00
Lucas Stach
801c7a1e52 drm/etnaviv: remove lastctx member from gpu struct
It only written and we don't infer any useful information from
it anymore. Remove it.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2018-12-18 11:55:16 +01:00
Lucas Stach
f9d255f454 drm/etnaviv: replace header include with forward declaration
The etnaviv_gpu header only needs to know about the pointer types, so
replace by a forward declaration and only include the headers where needed.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2018-12-18 11:55:11 +01:00
Lucas Stach
5a23144cb5 drm/etnaviv: remove unnecessary local irq disable
The only event function that is called from IRQ context is event_free,
which is already using atomic bitmap operations, so we can avoid taking
the event spinlock in this function completely. As other the other
functions still using the event spinlock are all called from normal
process context, we can avoid disabling IRQs while holding the spinlock.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2018-12-18 11:55:07 +01:00
Archit Taneja
93a6788a34 MAINTAINERS: drm: Remove myself as drm-bridge maintainer
I have moved on to other stuff for now. Haven't been able to make time
to review bridge related work. Andrzej has been doing it by himself
for a while now.

Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <sean@poorly.run>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180913075300.22510-1-architt@codeaurora.org
2018-12-18 11:42:03 +01:00
Geert Uytterhoeven
f83f97684a pinctrl: sh-pfc: Make pinmux_cfg_reg.var_field_width[] variable-length
pinmux_cfg_reg.var_field_width[] is actually a variable-length array,
terminated by a zero, and counting at most r_width entries.
Usually the number of entries is much smaller than r_width, so the
ability to catch bugs at compile time through an "excess elements in
array initializer" warning is fairly limited.

Hence make the array variable-length, decreasing kernel size slightly.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
ce16e8dd0d pinctrl: sh-pfc: Print actual field width for variable-width fields
The debug code in sh_pfc_write_config_reg() prints the width of the
field being modified.

However, registers with a variable-width field layout are identified by
pinmux_cfg_reg.field_width being zero, hence zeroes are printed instead
of the actual field widths.

Fix this by printing the Hamming weight of the field mask instead, which
is correct for both fixed-width and variable-width fields.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
054f2400f7 pinctrl: sh-pfc: sh7734: Fix shifted values in IPSR10
Some values in the Peripheral Function Select Register 10 descriptor are
shifted by one position, which may cause a peripheral function to be
programmed incorrectly.

Fixing this makes all HSCIF0 pins use Function 4 (value 3), like was
already the case for the HSCK0 pin in field IP10[5:3].

Fixes: ac1ebc2190 ("sh-pfc: Add sh7734 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
4d374bacd7 pinctrl: sh-pfc: sh7734: Remove bogus IPSR10 value
The IP10[5:3] field in Peripheral Function Select Register 10 has a
width of 3 bits, i.e. it allows programming one out of 8 different
configurations.
However, 9 values are provided instead of 8, overflowing into the
subsequent field in the register, and thus breaking the configuration of
the latter.

Fix this by dropping a bogus zero value.

Fixes: ac1ebc2190 ("sh-pfc: Add sh7734 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
9540cbdfcd pinctrl: sh-pfc: sh7269: Add missing PCIOR0 field
The Port C I/O Register 0 contains 7 reserved bits, but the descriptor
contains only dummy configuration values for 6 reserved bits, thus
breaking the configuration of all subsequent fields in the register.

Fix this by adding the two missing configuration values.

Fixes: f5e811f2a4 ("sh-pfc: Add sh7269 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
1b99d0c80b pinctrl: sh-pfc: sh7264: Fix PFCR3 and PFCR0 register configuration
The Port F Control Register 3 (PFCR3) contains only a single field.
However, counting from left to right, it is the fourth field, not the
first field.
Insert the missing dummy configuration values (3 fields of 16 values) to
fix this.

The descriptor for the Port F Control Register 0 (PFCR0) lacks the
description for the 4th field (PF0 Mode, PF0MD[2:0]).
Add the missing configuration values to fix this.

Fixes: a8d42fc421 ("sh-pfc: Add sh7264 pinmux support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
e28dc3f09c pinctrl: sh-pfc: r8a77995: Remove bogus SEL_PWM[0-3]_3 configurations
While the SEL_PWM[0-3] fields in the Module Select Register 0 support 4
possible configurations per PWM pin, only the first 3 are valid.

Replace the invalid and unused configurations for SEL_PWM[0-3]_3 by
dummies.

Fixes: 794a671176 ("pinctrl: sh-pfc: Initial R8A77995 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
755a5b805f pinctrl: sh-pfc: r8a77990: Fix MOD_SEL0 SEL_I2C1 field width
The SEL_I2C1 (MOD_SEL0[21:20]) field in Module Select Register 0 has a
width of 2 bits, i.e. it allows programming one out of 4 different
configurations.
However, the MOD_SEL0_21_20 macro contains 8 values instead of 4,
overflowing into the subsequent fields in the register, and thus breaking
the configuration of the latter.

Fix this by dropping the bogus last 4 values, including the non-existent
SEL_I2C1_4 configuration.

Fixes: 6d4036a1e3 ("pinctrl: sh-pfc: Initial R8A77990 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
94482af705 pinctrl: sh-pfc: sh7734: Add missing IPSR11 field
The Peripheral Function Select Register 11 contains 3 reserved bits and
15 variable-width fields, but the variable field descriptor does not
contain the 3-bit field IP11[25:23].

Fixes: 856cb4bb33 ("sh: Add support pinmux for SH7734")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
b0f77269f6 pinctrl: sh-pfc: r8a77980: Add missing MOD_SEL0 field
The Module Select Register 0 contains 20 (= 5 x 4) reserved bits, and 12
single-bit fields, but the variable field descriptor lacks a field of 4
reserved bits.

Fixes: f59125248a ("pinctrl: sh-pfc: Add R8A77980 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
67d7745bc7 pinctrl: sh-pfc: r8a77970: Add missing MOD_SEL0 field
The Module Select Register 0 contains 20 (= 5 x 4) reserved bits, and 12
single-bit fields, but the variable field descriptor lacks a field of 4
reserved bits.

Fixes: b92ac66a18 ("pinctrl: sh-pfc: Add R8A77970 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
6a6c195d98 pinctrl: sh-pfc: r8a7794: Remove bogus IPSR9 field
The Peripheral Function Select Register 9 contains 12 fields, but the
variable field descriptor contains a 13th bogus field of 3 bits.

Fixes: 43c4436e2f ("pinctrl: sh-pfc: add R8A7794 PFC support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
9925e87957 pinctrl: sh-pfc: Validate pins/marks in pin groups at build time
Add a build-time check, to ensure the number of pins and pin marks in a
pin group matches.  This helps catching bugs early.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
124cde98f8 pinctrl: sh-pfc: sh73a0: Add missing TO pin to tpu4_to3 group
The tpu4_to3_mux[] array contains the TPU4TO3 pin mark, but the
tpu4_to3_pins[] array lacks the corresponding pin number.

Add the missing pin number, for non-GPIO pin F26.

Fixes: 5da4eb049d ("sh-pfc: sh73a0: Add TPU pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
0d6256cb88 pinctrl: sh-pfc: r8a7791: Remove bogus marks from vin1_b_data18 group
The vin1_b_data18_mux[] arrays contains pin marks for the 2 LSB bits of
the color components.  The vin1_b_data18_pins[] array rightfully does
not include the corresponding pin numbers, as RGB18 is subset of RGB24,
containing only the 6 MSB bits of each component.

Fixes: 8e32c9671f ("pinctrl: sh-pfc: r8a7791: Add VIN pins")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
884fa25fb6 pinctrl: sh-pfc: r8a7791: Remove bogus ctrl marks from qspi_data4_b group
The qspi_data4_b_mux[] array contains pin marks for the clock and chip
select pins.  The qspi_data4_b_pins[] array rightfully does not contain
the corresponding pin numbers, as the control pins are provided by a
separate group (qspi_ctrl_b).

Fixes: 2d0c386f13 ("pinctrl: sh-pfc: r8a7791: Add QSPI pin groups")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
96bb2a6ab4 pinctrl: sh-pfc: r8a7740: Add missing LCD0 marks to lcd0_data24_1 group
The lcd0_data24_1_pins[] array contains the LCD0 D1[2-5] pin numbers,
but the lcd0_data24_1_mux[] array lacks the corresponding pin marks.

Fixes: 06c7dd866d ("sh-pfc: r8a7740: Add LCDC0 and LCDC1 pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
1ebc589a77 pinctrl: sh-pfc: r8a7740: Add missing REF125CK pin to gether_gmii group
The gether_gmii_mux[] array contains the REF125CK pin mark, but the
gether_gmii_pins[] array lacks the corresponding pin number.

Fixes: bae11d30d0 ("sh-pfc: r8a7740: Add GETHER pin groups and functions")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Geert Uytterhoeven
117774fbe6 pinctrl: sh-pfc: r8a77990: Fix IOCTRL reg state after s2ram on R-Car E3
Due to an interaction with commit 9f2b76a2db ("pinctrl: sh-pfc:
r8a77990: Add R8A774C0 PFC support"), the state of the I/O Control
Registers is saved/restored during s2ram on RZ/G2E, but not on R-Car E3.
Hence on R-Car E3, SDHI voltage state is lost after system resume.

Fix this by registering the I/O Control Registers on R-Car E3, too.

Fixes: 33847a7137 ("pinctrl: sh-pfc: r8a77990: Add voltage switch operations for SDHI")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:25:56 +01:00
Nicholas Mc Guire
db221412cd pinctrl: rza1: Handle devm_kasprintf() failure cases
devm_kasprintf() may return NULL on failure of internal allocation
thus the assignments are not safe if not checked. On error
rza1_pinctrl_register() respectively rza1_parse_gpiochip() return
negative values so -ENOMEM in the (unlikely) failure case of
devm_kasprintf() should be fine here.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 5a49b644b3 ("pinctrl: Renesas RZ/A1 pin and gpio controller")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2018-12-18 11:25:56 +01:00
Alex Hung
28586a51ee ACPI / OSI: Add OEM _OSI string to enable dGPU direct output
For HP Inc. mobile workstation with hybrid graphics support, dGPU can
directly output to external monitors; however, Nvidia and AMD's Linux
drivers aren't able to support this feature.

The OEM _OSI string "Linux-HPI-Hybrid-Graphics" is used by BIOS to
implement dGPU direct output to external monitors.

The form of the OEM _OSI strings is defined by each OEMs and is
discussed in Documentation/acpi/osi.txt.

Signed-off-by: Alex Hung <alex.hung@canonical.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-18 11:06:05 +01:00
Geert Uytterhoeven
f4caa6ee73 pinctrl: sh-pfc: r8a77990: Add support for pull-up only pins
The R-Car Gen3 HardWare Manual Errata for Rev. 1.00 (Jul 2, 2018) states
that the USB30_OVC pin supports pull-up only.  It has a bit assigned in
the pull-enable register (PUEN5), but not in the pull-up/down control
register (PUD5).

Add a check for this, to prevent configuring a prohibited setting.

Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Fixes: 83f6941a42 ("pinctrl: sh-pfc: r8a77990: Add bias pinconf support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
2018-12-18 11:02:33 +01:00
Tetsuo Handa
15ff2069cb printk: Add caller information to printk() output.
Sometimes we want to print a series of printk() messages to consoles
without being disturbed by concurrent printk() from interrupts and/or
other threads. But we can't enforce printk() callers to use their local
buffers because we need to ask them to make too much changes. Also, even
buffering up to one line inside printk() might cause failing to emit
an important clue under critical situation.

Therefore, instead of trying to help buffering, let's try to help
reconstructing messages by saving caller information as of calling
log_store() and adding it as "[T$thread_id]" or "[C$processor_id]"
upon printing to consoles.

Some examples for console output:

  [    1.222773][    T1] x86: Booting SMP configuration:
  [    2.779635][    T1] pci 0000:00:01.0: PCI bridge to [bus 01]
  [    5.069193][  T268] Fusion MPT base driver 3.04.20
  [    9.316504][    C2] random: fast init done
  [   13.413336][ T3355] Initialized host personality

Some examples for /dev/kmsg output:

  6,496,1222773,-,caller=T1;x86: Booting SMP configuration:
  6,968,2779635,-,caller=T1;pci 0000:00:01.0: PCI bridge to [bus 01]
   SUBSYSTEM=pci
   DEVICE=+pci:0000:00:01.0
  6,1353,5069193,-,caller=T268;Fusion MPT base driver 3.04.20
  5,1526,9316504,-,caller=C2;random: fast init done
  6,1575,13413336,-,caller=T3355;Initialized host personality

Note that this patch changes max length of messages which can be printed
by printk() or written to /dev/kmsg interface from 992 bytes to 976 bytes,
based on an assumption that userspace won't try to write messages hitting
that border line to /dev/kmsg interface.

Link: http://lkml.kernel.org/r/93f19e57-5051-c67d-9af4-b17624062d44@i-love.sakura.ne.jp
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: LKML <linux-kernel@vger.kernel.org>
Cc: syzkaller <syzkaller@googlegroups.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
2018-12-18 10:53:14 +01:00
Rafael J. Wysocki
7edcbbf290 ACPI: PM: Loop in full LPS0 mode only
After a previous change, all non-wakeup GPEs are disabled for
suspend-to-idle unless full Low-Power S0 (LPS0) mode is in use, so
it is not necessary to do anything in acpi_s2idle_wake() unless in
full LPS0 mode, which is only when lps0_device_handle is set.

Modify the code accordingly.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-18 10:51:16 +01:00
Rafael J. Wysocki
f941d3e41d ACPI: EC / PM: Disable non-wakeup GPEs for suspend-to-idle
There are systems in which non-wakeup GPEs fire during the "noirq"
suspend stage of suspending devices and that effectively prevents the
system that tries to suspend to idle from entering any low-power
state at all.  If the offending GPE fires regularly and often enough,
the system appears to be suspended, but in fact it is in a tight loop
over "noirq" suspend and "noirq" resume of devices all the time.

To prevent that from happening, disable all non-wakeup GPEs except
for the EC GPE for suspend-to-idle (the EC GPE is special, because
on some systems it has to be enabled for power button wakeup events
to be generated as expected).

Fixes: 147a7d9d25 (ACPI / PM: Do not reconfigure GPEs for suspend-to-idle)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=201987
Reported-by: Zhang Rui <rui.zhang@intel.com>
Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-18 10:51:16 +01:00
Hans de Goede
2c5c415c1d drm/i915: Update crtc scaler settings when update_pipe is set
When the pipe_config's update_pipe flag is set we may need to update the
panel fitting settings. On GEN9+ this means we need to update the crtc's
scaler settings.

This fixes the following WARN_ON, during i915 loading on an Asrock
B150M Pro4S/D3 board with an i5-6500 CPU / graphics:

[drm:pipe_config_err [i915]] *ERROR* mismatch in pch_pfit.enabled
 (expected no, found yes)
pipe state doesn't match!
WARNING: CPU: 3 PID: 305 at drivers/gpu/drm/i915/intel_display.c:12084

With line 12084 being the I915_STATE_WARN call inside the
"if (!intel_pipe_config_compare())" block in verify_crtc_state().

On this board with 2 1920x1080 monitors connected over HDMI the GOP
initializes both monitors at 1920x1080 and despite no scaling being
necessary configures a scaler for one of them.

When booting with fastboot=1 on the initial modeset needs_modeset will
be false while update_pipe is true. Since we were not calling
skl_update_scaler_crtc() in this case we would leave the scaler enabled
causing this error.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181217141903.4182-1-hdegoede@redhat.com
2018-12-18 10:46:34 +01:00
Doug Smythies
663546903c tools/power/x86/intel_pstate_tracer: Fix non root execution for post processing a trace file
This script is supposed to be allowed to run with regular user
privileges if a previously captured trace is being post processed.

Commit fbe313884d (tools/power/x86/intel_pstate_tracer: Free the
trace buffer memory) introduced a bug that breaks that option.

Commit 35459105de (tools/power/x86/intel_pstate_tracer: Add
optional setting of trace buffer memory allocation) moved the code
but kept the bug.

This patch fixes the issue.

Fixes: 35459105de (tools/power/x86/intel_pstate_tracer: Add optional ...)
Signed-off-by: Doug Smythies <dsmythies@telus.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-18 10:44:17 +01:00
Rafael J. Wysocki
67e4eb30ea linux-cpupower-4.21-rc1
This cpupower update Linux 4.21 adds support for auto-completion for
 cpupower tool from Abhishek Goel.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPZKym/RZuOCGeA/kCwJExA0NQxwFAlwX3PMACgkQCwJExA0N
 QxzzqQ//Xu0vZeGy7Mk/hU/FR6lnnpvjju79jrlghQ0ZPgFUrmetL3KyleQMa2zZ
 7OsVpdRNhE+kkxGStKh81Ts+DwAZaSbw25iGxlF0KOrdq8G7U06cbWI3HKHj+/Ty
 xKLOY2kInMwBVmYUr6meDqAhci92ZA2cO+owfs2PeR7I6vdMS/jX/ROFxiV9tf/X
 aczwMlY89qhWp5qrgbzAYtNdDy6jZVptW5teCkmjPUYzr/BANP7/E9F9Z0x9zz2Z
 1mEH4Lr+pMIsrAuXH55MYg1foVXmTJiJXL6J4Rs8/xLVcjAedc0H1+mu7hKkRioD
 sLOCbTWaJlQ26rxOGrOl7h4kxfVpjLlBYnLFjp3rOMV/lIRAfc93qUMHXCyXKf5i
 1kkm+pDhUrX1j8lmY9vS9i7UuaJmv8NGvjWEIgiXgP0jVm495HfrcA/DyHrxClul
 th32DAl4y8HJPDCesXMjzRh9/f+wO5VLqVy4b1cNfv47zGQUEGqdxLhx0OVfrueU
 FWc5iO5UK5yOue4uOC+VE0IbGGMPIhgJ4i1mwDijBGP5ojBCpCKS8ksXOtyLewOH
 PzNl/FoNTgMTjXRRDxGhn4at8spfzuelZS9nHNsXnGYb83J6HVYR+SSspChmRmfh
 Xx01HxEyyCaLfbEbPcZXar3mvGyeCZbLER2Lv42mXvWakoueQ+4=
 =U+pY
 -----END PGP SIGNATURE-----

Merge tag 'linux-cpupower-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux

Pull cpupower utility updates for v4.21 from Shuah Khan:

"This cpupower update Linux 4.21 adds support for auto-completion for
 cpupower tool from Abhishek Goel."

* tag 'linux-cpupower-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
  cpupower : Auto-completion for cpupower tool
2018-12-18 10:32:01 +01:00
Nicholas Mc Guire
5f30b2e823 livepatch: check kzalloc return values
kzalloc() return should always be checked - notably in example code
where this may be seen as reference. On failure of allocation in
livepatch_fix1_dummy_alloc() respectively dummy_alloc() previous
allocation is freed (thanks to Petr Mladek <pmladek@suse.com> for
catching this) and NULL returned.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Fixes: 439e7271dc ("livepatch: introduce shadow variable API")
Acked-by: Joe Lawrence <joe.lawrence@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-12-18 10:23:07 +01:00
Scott Chen
8d503f206c USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays
Add device ids to pl2303 for the HP POS pole displays:
LM920:   03f0:026b
TD620:   03f0:0956
LD960TA: 03f0:4439
LD220TA: 03f0:4349
LM940:   03f0:5039

Signed-off-by: Scott Chen <scott@labau.com.tw>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Johan Hovold <johan@kernel.org>
2018-12-18 10:22:37 +01:00
Michael Mueller
7aedd9d48f KVM: s390: fix kmsg component kvm-s390
Relocate #define statement for kvm related kernel messages
before the include of printk to become effective.

Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-12-18 10:18:27 +01:00
Michael Mueller
308c3e6673 KVM: s390: unregister debug feature on failing arch init
Make sure the debug feature and its allocated resources get
released upon unsuccessful architecture initialization.

A related indication of the issue will be reported as kernel
message.

Signed-off-by: Michael Mueller <mimu@linux.ibm.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20181130143215.69496-2-mimu@linux.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-12-18 10:18:27 +01:00
John Hurley
b12c97d45c nfp: flower: fix cb_ident duplicate in indirect block register
Previously the identifier used for indirect block callback registry and
for block rule cb registry (when done via indirect blocks) was the pointer
to the netdev we were interested in receiving updates on. This worked fine
if a single app existed that registered one callback per netdev of
interest. However, if multiple cards are in place and, in turn, multiple
apps, then each app may register the same callback with the same
identifier to both the netdev's indirect block cb list and to a block's cb
list. This can lead to EEXIST errors and/or incorrect cb deletions.

Prevent this conflict by using the app pointer as the identifier for
netdev indirect block cb registry, allowing each app to register a unique
callback per netdev. For block cb registry, the same app may register
multiple cbs to the same block if using TC shared blocks. Instead of the
app, use the pointer to the allocated cb_priv data as the identifier here.
This means that there can be a unique block callback for each app/netdev
combo.

Fixes: 3166dd07a9 ("nfp: flower: offload tunnel decap rules via indirect TC blocks")
Reported-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: John Hurley <john.hurley@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17 23:34:12 -08:00
Shalom Toledo
d1675a1602 mlxsw: spectrum: Update the supported firmware to version 13.1910.622
This new firmware contains:
 * New packet traps for discarded packets
 * Secure firmware flash bug fix
 * Fence mechanism bug fix
 * TCAM RMA bug fix

Signed-off-by: Shalom Toledo <shalomt@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17 23:32:29 -08:00
David Ahern
f5c6dfdefb ip6mr: Drop mfc6_cache argument to ip6mr_forward2
mfc6_cache is not needed by ip6mr_forward2 so drop it from the input
argument list.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17 23:31:14 -08:00
David Ahern
6e0735d1f7 ipmr: Drop mfc_cache argument to ipmr_queue_xmit
mfc_cache is not needed by ipmr_queue_xmit so drop it from the input
argument list.

Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17 23:31:14 -08:00
Vivien Didelot
a5f3932646 net: dsa: mv88e6xxx: set ethtool regs version
Currently the ethtool_regs version is set to 0 for all DSA drivers.

Use this field to store the chip ID to simplify the pretty dump of
any interfaces registered by the "dsa" driver.

Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-17 23:29:00 -08:00