Commit graph

982,081 commits

Author SHA1 Message Date
Mikulas Patocka
24113d4878 dm: avoid indirect call in __dm_make_request
Indirect calls are inefficient because of retpolines that are used for
spectre workaround. This patch replaces an indirect call with a condition
(that can be predicted by the branch predictor).

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2018-12-18 09:02:25 -05:00
Clint Taylor
b265a2a625 drm/i915/icl: combo port vswing programming changes per BSPEC
In August 2018 the BSPEC changed the ICL port programming sequence to
closely resemble earlier gen programming sequence. Restrict combo phy to
HBR max rate unless eDP panel is connected to port.

v2: remove debug code that Imre found
v3: simplify translation table if-else
v4: edp translation table now based on link rate and low_swing
v5: Misc review comments + r-b
BSpec: 21257
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1545084827-5776-1-git-send-email-clinton.a.taylor@intel.com
2018-12-18 16:00:16 +02:00
Takashi Iwai
ed49e83919 ASoC: Updates for v4.21
Not much work on the core this time around but we've seen quite a bit of
 driver work, including on the generic DT drivers.  There's also a large
 part of the diff from a merge of the DaVinci and OMAP directories, along
 with some active development there:
 
  - Preparatory work from Morimoto-san for merging the audio-graph and
    audio-graph-scu cards.
  - A merge of the TI OMAP and DaVinci directories, the OMAP product line
    has been merged into the DaVinci product line so there is now a lot
    of IP sharing which meant that the split directories just got in the
    way.  This has pulled in a few architecture changes as well.
  - A big cleanup of the Maxim MAX9867 driver from Ladislav Michl.
  - Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
    RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx I2S
    controllers.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCgAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAlwY7KsTHGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0MFqB/4m9nlfUeXTpiSD1FgVIlMmdPNUg4V2
 6Ybztaw4kRc5LuQN8PXQmaFLx020yAnLvI7Zzj7l3K8r6a9lfyFs+pKL0wtBnNK2
 9QEFmOVQ3QFpt31Yb2IQeO4dfNbiyKeczjLau4mXWTl0j5dc/UH+HasE1dRZOxsC
 rqJ8IsdibIVxVtQ7ZmcnU+y6XK0inBHAAh6ksMehsufShGrfrLs/nRBaXRZcRqJg
 ciSFY5uYRYkDxTgogTpNRfVy4nr17N10+0sgrQ3RtaaqgG3gBXsHca1meyxKYW3Q
 TssOJGIl3+uGiAMNyZqzxe5pAwwuGhZ3hAAAODtfYJQtAuAOW3/45Wqh
 =phWF
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next

ASoC: Updates for v4.21

Not much work on the core this time around but we've seen quite a bit of
driver work, including on the generic DT drivers.  There's also a large
part of the diff from a merge of the DaVinci and OMAP directories, along
with some active development there:

 - Preparatory work from Morimoto-san for merging the audio-graph and
   audio-graph-scu cards.
 - A merge of the TI OMAP and DaVinci directories, the OMAP product line
   has been merged into the DaVinci product line so there is now a lot
   of IP sharing which meant that the split directories just got in the
   way.  This has pulled in a few architecture changes as well.
 - A big cleanup of the Maxim MAX9867 driver from Ladislav Michl.
 - Support for Asahi Kaesi AKM4118, AMD ACP3x, Intel platforms with
   RT5660, Meson AXG S/PDIF inputs, several Qualcomm IPs and Xilinx I2S
   controllers.
2018-12-18 14:59:56 +01:00
Peter Hutterer
46b14eef59 HID: doc: fix wrong data structure reference for UHID_OUTPUT
Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2018-12-18 14:55:22 +01:00
Honghui Zhang
41c5c5b0e7 arm64: dts: mt7622: Remove un-used property for PCIe
The "num-lanes" property for PCIe is not used, remove it.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-12-18 13:48:32 +00:00
Honghui Zhang
ebcd631df1 arm: dts: mt7623: Remove un-used property for PCIe
The "num-lanes" property for PCIe is not used, remove it.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-12-18 13:48:24 +00:00
Honghui Zhang
f2bb7d6a82 dt-bindings: PCI: MediaTek: Remove un-used property
The "num-lanes" property is not used, remove it.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-12-18 13:48:17 +00:00
Honghui Zhang
7b96dc91be PCI: mediatek: Remove un-used variant in struct mtk_pcie_port
The "lane" variant in struct mtk_pcie_port is not used, remove it.

Signed-off-by: Honghui Zhang <honghui.zhang@mediatek.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
2018-12-18 13:48:07 +00:00
Daniel Borkmann
a137401d85 Merge branch 'bpf-bpftool-mount-tracefs'
Quentin Monnet says:

====================
This series focus on mounting (or not mounting) tracefs with bpftool.

First patch makes bpftool attempt to mount tracefs if tracefs is not
found when running "bpftool prog tracelog".

Second patch adds an option to bpftool to prevent it from attempting
to mount any file system (tracefs or bpffs), in case this behaviour
is undesirable for some users.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-18 14:47:19 +01:00
Quentin Monnet
33221307c3 tools: bpftool: add an option to prevent auto-mount of bpffs, tracefs
In order to make life easier for users, bpftool automatically attempts
to mount the BPF virtual file system, if it is not mounted already,
before trying to pin objects in it. Similarly, it attempts to mount
tracefs if necessary before trying to dump the trace pipe to the
console.

While mounting file systems on-the-fly can improve user experience, some
administrators might prefer to avoid that. Let's add an option to block
these mount attempts. Note that it does not prevent automatic mounting
of tracefs by debugfs for the "bpftool prog tracelog" command.

Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-18 14:47:17 +01:00
Quentin Monnet
be3245e22d tools: bpftool: attempt to mount tracefs if required for tracelog cmd
As a follow-up to commit 30da46b5dc ("tools: bpftool: add a command to
dump the trace pipe"), attempt to mount the tracefs virtual file system
if it is not detected on the system before trying to dump content of the
tracing pipe on an invocation of "bpftool prog tracelog".

Usually, tracefs in automatically mounted by debugfs when the user tries
to access it (e.g. "ls /sys/kernel/debug/tracing" mounts the tracefs).
So if we failed to find it, it is probably that debugfs is not here
either. Therefore, we just attempt a single mount, at a location that
does not involve debugfs: /sys/kernel/tracing.

Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-18 14:47:17 +01:00
Yonghong Song
0d7410ea6e tools/bpf: check precise {func, line, jited_line}_info_rec_size in test_btf
Current btf func_info, line_info and jited_line are designed to be
extensible. The record sizes for {func,line}_info are passed to kernel,
and the record sizes for {func,line,jited_line}_info are returned to
userspace during bpf_prog_info query.

In bpf selftests test_btf.c, when testing whether kernel returns
a legitimate {func,line, jited_line)_info rec_size, the test only
compares to the minimum allowed size. If the returned rec_size is smaller
than the minimum allowed size, it is considered incorrect.
The minimum allowed size for these three info sizes are equal to
current value of sizeof(struct bpf_func_info), sizeof(struct bpf_line_info)
and sizeof(__u64).

The original thinking was that in the future when rec_size is increased
in kernel, the same test should run correctly. But this sacrificed
the precision of testing under the very kernel the test is shipped with,
and bpf selftest is typically run with the same repo kernel.

So this patch changed the testing of rec_size such that the
kernel returned value should be equal to the size defined by
tools uapi header bpf.h which syncs with kernel uapi header.

Martin discovered a bug in one of rec_size comparisons.
Instead of comparing to minimum func_info rec_size 8, it compares to 4.
This patch fixed that issue as well.

Fixes: 999d82cbc0 ("tools/bpf: enhance test_btf file testing to test func info")
Fixes: 05687352c6 ("bpf: Refactor and bug fix in test_func_type in test_btf.c")
Fixes: 4d6304c763 ("bpf: Add unit tests for bpf_line_info")
Suggested-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-12-18 14:46:32 +01:00
Ingo Molnar
ca46afdb27 perf/core improvements and fixes:
- Introduce 'perf record --aio' to use asynchronous IO trace writing, disabled
   by default (Alexey Budankov)
 
 - Add fallback routines to be used in places where we don't have the CPU mode
   (kernel/userspace/hypervisor) and thus must first fallback lookups looking
   at all map trees when trying to resolve symbols (Adrian Hunter)
 
 - Fix error with config term "pt=0", where we should just force "pt=1" and
   warn the user about the former being nonsensical (Adrian Hunter)
 
 - Fix 'perf test' entry where we expect 'sleep' to come in a PERF_RECORD_COMM
   but instead we get 'coreutils' when sleep is provided by some versions of
   the 'coreutils' package (Adrian Hunter)
 
 - Introduce 'perf top --kallsyms file' to match 'perf report --kallsyms', useful
   when dealing with BPF, where symbol resolution happens via kallsyms, not via
   the default vmlinux ELF symtabs (Arnaldo Carvalho de Melo)
 
 - Support 'srccode' output field in 'perf script' (Andi Kleen)
 
 - Introduce basic 'perf annotation' support for the ARC architecture (Eugeniy Paltsev)
 
 - Compute and display average IPC and IPC coverage per symbol in 'perf annotate' and
   'perf report' (Jin Yao)
 
 - Make 'perf top' use ordered_events and process histograms in a separate thread (Jiri Olsa)
 
 - Make 'perf trace' use ordered_events (Jiri Olsa)
 
 - Add support for ETMv3 and PTMv1.1 decoding in cs-etm (Mathieu Poirier)
 
 - Support for ARM A32/T32 instruction sets in CoreSight trace (cs-etm) (Robert Walker)
 
 - Fix 'perf stat' shadow stats for clock events. (Ravi Bangoria)
 
 - Remove needless rb_tree extra indirection from map__find() (Eric Saint-Etienne)
 
 - Fix CSV mode column output for non-cgroup events in 'perf stat' (Stephane Eranian)
 
 - Add sanity check to libtraceevent's is_timestamp_in_us() (Tzvetomir Stoyanov)
 
 - Use ERR_CAST instead of ERR_PTR(PTR_ERR()) (Wen Yang)
 
 - Fix Load_Miss_Real_Latency on SKL/SKX intel vendor event files (Andi Kleen)
 
 - strncpy() fixes triggered by new warnings on gcc 8.2.0 (Arnaldo Carvalho de Melo)
 
 - Handle tracefs syscall tracepoint older 'nr' field in 'perf trace', that got
   renamed to '__syscall_nr' to work in older kernels (Arnaldo Carvalho de Melo)
 
 - Give better hint about devel package for libssl (Arnaldo Carvalho de Melo)
 
 - Fix the 'perf trace' build in architectures lacking explicit mmap.h file (Arnaldo Carvalho de Melo)
 
 - Remove extra rb_tree traversal indirection from map__find() (Eric Saint-Etienne)
 
 - Disable breakpoint tests for 32-bit ARM (Florian Fainelli)
 
 - Fix typos all over the place, mostly in comments, but also in some debug
   messages and JSON files (Ingo Molnar)
 
 - Allow specifying proc-map-timeout in config file (Mark Drayton)
 
 - Fix mmap_flags table generation script (Sihyeon Jang)
 
 - Fix 'size' parameter to snprintf in the 'perf config' code (Sihyeon Jang)
 
 - More libtraceevent renames to make it a proper library (Tzvetomir Stoyanov)
 
 - Implement new API tep_get_ref() in libtraceevent (Tzvetomir Stoyanov)
 
 - Added support for pkg-config in libtraceevent (Tzvetomir Stoyanov)
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCXBfqKQAKCRCyPKLppCJ+
 JwB3AQCn2ij14Y2W4Cvy0ka18LZlxQkC0b+L30XZwUv9q34FSwD9HyErhRWTQhEU
 PgPdn6TKqh9aYy7LRFACiQ4x/s7Dug8=
 =xxUZ
 -----END PGP SIGNATURE-----

Merge tag 'perf-core-for-mingo-4.21-20181217' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

- Introduce 'perf record --aio' to use asynchronous IO trace writing, disabled
  by default (Alexey Budankov)

- Add fallback routines to be used in places where we don't have the CPU mode
  (kernel/userspace/hypervisor) and thus must first fallback lookups looking
  at all map trees when trying to resolve symbols (Adrian Hunter)

- Fix error with config term "pt=0", where we should just force "pt=1" and
  warn the user about the former being nonsensical (Adrian Hunter)

- Fix 'perf test' entry where we expect 'sleep' to come in a PERF_RECORD_COMM
  but instead we get 'coreutils' when sleep is provided by some versions of
  the 'coreutils' package (Adrian Hunter)

- Introduce 'perf top --kallsyms file' to match 'perf report --kallsyms', useful
  when dealing with BPF, where symbol resolution happens via kallsyms, not via
  the default vmlinux ELF symtabs (Arnaldo Carvalho de Melo)

- Support 'srccode' output field in 'perf script' (Andi Kleen)

- Introduce basic 'perf annotation' support for the ARC architecture (Eugeniy Paltsev)

- Compute and display average IPC and IPC coverage per symbol in 'perf annotate' and
  'perf report' (Jin Yao)

- Make 'perf top' use ordered_events and process histograms in a separate thread (Jiri Olsa)

- Make 'perf trace' use ordered_events (Jiri Olsa)

- Add support for ETMv3 and PTMv1.1 decoding in cs-etm (Mathieu Poirier)

- Support for ARM A32/T32 instruction sets in CoreSight trace (cs-etm) (Robert Walker)

- Fix 'perf stat' shadow stats for clock events. (Ravi Bangoria)

- Remove needless rb_tree extra indirection from map__find() (Eric Saint-Etienne)

- Fix CSV mode column output for non-cgroup events in 'perf stat' (Stephane Eranian)

- Add sanity check to libtraceevent's is_timestamp_in_us() (Tzvetomir Stoyanov)

- Use ERR_CAST instead of ERR_PTR(PTR_ERR()) (Wen Yang)

- Fix Load_Miss_Real_Latency on SKL/SKX intel vendor event files (Andi Kleen)

- strncpy() fixes triggered by new warnings on gcc 8.2.0 (Arnaldo Carvalho de Melo)

- Handle tracefs syscall tracepoint older 'nr' field in 'perf trace', that got
  renamed to '__syscall_nr' to work in older kernels (Arnaldo Carvalho de Melo)

- Give better hint about devel package for libssl (Arnaldo Carvalho de Melo)

- Fix the 'perf trace' build in architectures lacking explicit mmap.h file (Arnaldo Carvalho de Melo)

- Remove extra rb_tree traversal indirection from map__find() (Eric Saint-Etienne)

- Disable breakpoint tests for 32-bit ARM (Florian Fainelli)

- Fix typos all over the place, mostly in comments, but also in some debug
  messages and JSON files (Ingo Molnar)

- Allow specifying proc-map-timeout in config file (Mark Drayton)

- Fix mmap_flags table generation script (Sihyeon Jang)

- Fix 'size' parameter to snprintf in the 'perf config' code (Sihyeon Jang)

- More libtraceevent renames to make it a proper library (Tzvetomir Stoyanov)

- Implement new API tep_get_ref() in libtraceevent (Tzvetomir Stoyanov)

- Added support for pkg-config in libtraceevent (Tzvetomir Stoyanov)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-12-18 14:39:00 +01:00
Chang S. Bae
87ab4689ca x86/fsgsbase/64: Fix the base write helper functions
Andy spotted a regression in the fs/gs base helpers after the patch series
was committed. The helper functions which write fs/gs base are not just
writing the base, they are also changing the index. That's wrong and needs
to be separated because writing the base has not to modify the index.

While the regression is not causing any harm right now because the only
caller depends on that behaviour, it's a guarantee for subtle breakage down
the road.

Make the index explicitly changed from the caller, instead of including
the code in the helpers.

Subsequently, the task write helpers do not handle for the current task
anymore. The range check for a base value is also factored out, to minimize
code redundancy from the caller.

Fixes: b1378a561f ("x86/fsgsbase/64: Introduce FS/GS base helper functions")
Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Lutomirski <luto@kernel.org>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: https://lkml.kernel.org/r/20181126195524.32179-1-chang.seok.bae@intel.com
2018-12-18 14:26:09 +01:00
Daniel Vetter
221b35fede Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next
Lucas writes:

"nothing major this time, mostly some cleanups that were found on the
way of reworking the code in preparation for new feature additions."

Small conflict in drivers/gpu/drm/etnaviv/etnaviv_drv.c because
drm-misc-next also has a patch to switch over to _put() functions.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1545130845.5874.23.camel@pengutronix.de
2018-12-18 14:24:52 +01:00
Ingo Molnar
c5f48c0a7a genirq: Fix various typos in comments
Go over the IRQ subsystem source code (including irqchip drivers) and
fix common typos in comments.

No change in functionality intended.

Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
2018-12-18 14:22:28 +01:00
Shaul Triebitz
dc7eb0f2c2 mac80211: do not advertise HE cap IE if HE disabled
When disabling HE due to the lack of HT/VHT, do it
at an earlier stage to avoid advertising HE capabilities IE.
Also, at this point, no need to check if AP supports HE, since
it is already checked earlier (in ieee80211_prep_channel).

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 14:19:52 +01:00
Shaul Triebitz
002245ec20 mac80211: set STA flag DISABLE_HE if HE is not supported
Up until now, the IEEE80211_STA_DISABLE_HE flag was set only based
on whether the AP has advertised HE capabilities.
This flag should be set also if STA does not support HE
(regardless of the AP support).

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 14:19:39 +01:00
Shaul Triebitz
2e249fc320 mac80211: update driver when MU EDCA params change
Similar to WMM IE, if MU_EDCA IE parameters changed (or ceased to exist)
tell the Driver about it.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 14:19:10 +01:00
Shaul Triebitz
daa5b83513 mac80211: update HE operation fields to D3.0
HE Operation element has changed in 11ax D3.0.  Update the fields
accordingly.

Signed-off-by: Shaul Triebitz <shaul.triebitz@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 14:19:00 +01:00
Emmanuel Grumbach
55ebd6e6c7 mac80211: propagate the support for TWT to the driver
TWT is a feature that was added in 11ah and enhanced in
11ax. There are two bits that need to be set if we want
to use the feature in 11ax: one in the HE Capability IE
and one in the Extended Capability IE. This is because
of backward compatibility between 11ah and 11ax.

In order to simplify the flow for the low level driver
in managed mode, aggregate the two bits and add a boolean
that tells whether TWT is supported or not, but only if
11ax is supported.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 14:18:49 +01:00
Emmanuel Grumbach
fdb313e318 ieee80211: add bits for TWT in Extended Capabilities IE
These bits are defined in ieee802.11ax to advertise support
for TWT in addition to the bits in the HE IE.

Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 14:18:38 +01:00
Thomas Lendacky
20c3a2c33e x86/speculation: Add support for STIBP always-on preferred mode
Different AMD processors may have different implementations of STIBP.
When STIBP is conditionally enabled, some implementations would benefit
from having STIBP always on instead of toggling the STIBP bit through MSR
writes. This preference is advertised through a CPUID feature bit.

When conditional STIBP support is requested at boot and the CPU advertises
STIBP always-on mode as preferred, switch to STIBP "on" support. To show
that this transition has occurred, create a new spectre_v2_user_mitigation
value and a new spectre_v2_user_strings message. The new mitigation value
is used in spectre_v2_user_select_mitigation() to print the new mitigation
message as well as to return a new string from stibp_state().

Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Link: https://lkml.kernel.org/r/20181213230352.6937.74943.stgit@tlendack-t1.amdoffice.net
2018-12-18 14:13:33 +01:00
Sriram R
30c63115e2 nl80211: Add support to notify radar event info received from STA
Currently radar detection and corresponding channel switch is handled
at the AP device. STA ignores these detected radar events since the
radar signal can be seen mostly by the AP as well. But in scenarios where
a radar signal is seen only at STA, notifying this event to the AP which
can trigger a channel switch can be useful.
Stations can report such radar events autonomously through Spectrum
management (Measurement Report) action frame to its AP. The userspace on
processing the report can notify the kernel with the use of the added
NL80211_CMD_NOTIFY_RADAR to indicate the detected event and inturn adding
the reported channel to NOL.

Signed-off-by: Sriram R <srirrama@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 14:13:05 +01:00
Lucas Stach
8ca66b7ccf irqchip/irq-imx-gpcv2: Add IRQCHIP_DECLARE for i.MX8MQ compatible
The GPC node on i.MX8MQ can not claim to be compatible with the i.MX7D
GPC, as the power gating part has some significant differences. Thus we
can not rely on the irqchip being probed with the old compatible.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 12:59:18 +00:00
Wei Yongjun
1fb51c975a irqchip/irq-rda-intc: Fix return value check in rda8810_intc_init()
In case of error, the function of_io_request_and_map() returns ERR_PTR()
and never returns NULL. The NULL test in the return value check should
be replaced with IS_ERR().

Fixes: d852e62ad6 ("irqchip: Add RDA8810PL interrupt driver")
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-12-18 12:55:23 +00:00
Hui Wang
aa02ef099c x86/topology: Use total_cpus for max logical packages calculation
nr_cpu_ids can be limited on the command line via nr_cpus=. This can break the
logical package management because it results in a smaller number of packages
while in kdump kernel.

Check below case:
There is a two sockets system, each socket has 8 cores, which has 16 logical
cpus while HT was turn on.

 0  1  2  3  4  5  6  7     |    16 17 18 19 20 21 22 23
 cores on socket 0               threads on socket 0
 8  9 10 11 12 13 14 15     |    24 25 26 27 28 29 30 31
 cores on socket 1               threads on socket 1

While starting the kdump kernel with command line option nr_cpus=16 panic
was triggered on one of the cpus 24-31 eg. 26, then online cpu will be
1-15, 26(cpu 0 was disabled in kdump), ncpus will be 16 and
__max_logical_packages will be 1, but actually two packages were booted on.

This issue can reproduced by set kdump option nr_cpus=<real physical core
numbers>, and then trigger panic on last socket's thread, for example:

taskset -c 26 echo c > /proc/sysrq-trigger

Use total_cpus which will not be limited by nr_cpus command line to calculate
the value of __max_logical_packages.

Signed-off-by: Hui Wang <john.wanghui@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: <guijianfeng@huawei.com>
Cc: <wencongyang2@huawei.com>
Cc: <douliyang1@huawei.com>
Cc: <qiaonuohan@huawei.com>
Link: https://lkml.kernel.org/r/20181107023643.22174-1-john.wanghui@huawei.com
2018-12-18 13:38:37 +01:00
Mark Brown
a7a850dba8
Merge branch 'asoc-4.21' into asoc-next 2018-12-18 12:23:59 +00:00
Mark Brown
c5fd9e77be
Merge branch 'asoc-4.20' into asoc-linus 2018-12-18 12:23:57 +00:00
Peter Ujfalusi
0f4967bc21
ASoC: ti: Kconfig: Remove the deprecated options
We no longer have these options used anywhere.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-18 12:23:17 +00:00
Peter Ujfalusi
41e95652ee
ARM: davinci_all_defconfig: Update the audio options
Use the new options for default audio support.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-18 12:23:13 +00:00
Peter Ujfalusi
eab5b50a13
ARM: omap1_defconfig: Do not select ASoC by default
No audio support is enabled by default via ASoC, disable the code as well.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-18 12:23:09 +00:00
Peter Ujfalusi
3162b05fb7
ARM: omap2plus_defconfig: Update the audio options
Use the new options for default audio support and enable Nokia n900 audio
as well.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-18 12:23:06 +00:00
Peter Ujfalusi
4d8c1e7efb
ARM: davinci: dm365-evm: Update for the new ASoC Kcofnig options
The codec selection config options for DMA365 has been changed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-18 12:23:01 +00:00
Peter Ujfalusi
558eb0bfb2
ARM: OMAP2: Update for new MCBSP Kconfig option
The MCBSP config option has been changed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-18 12:22:57 +00:00
Peter Ujfalusi
c27ace2e95
ARM: OMAP1: Makefile: Update for new MCBSP Kconfig option
The MCBSP config option has been changed.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-18 12:22:53 +00:00
Peter Ujfalusi
ca1c4d6535
MAINTAINERS: Add entry for sound/soc/ti and update the OMAP audio support
The sound/soc/davinci and omap directories are merged under sound/soc/ti.

Add myself as maintainer and update the OMAP audio support section with the
new path and file names.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-18 12:22:49 +00:00
Peter Ujfalusi
f2055e145f
ASoC: ti: Merge davinci and omap directories
Create new directory to contain all Texas Instruments specific DAI,
platform and machine drivers instead of scattering them under davinci and
omap directories.

There is already inter dependency between the two directories becasue of
McASP (on dra7x it is serviced by sDMA, not EDMA).

With the upcoming AM654 we will need to introduce new platform driver for
UDMA and it does not fit under davinci, nor under omap.

With the move I have restructured the Kconfig to be more usable in the era
of simple-sound-card:
CPU DAIs can be selected individually and they will select the platform
driver they can be served with.

To avoid breakage, I have moved over deprecated Kconfig options so
defconfig builds will work without regression.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
For sound/soc/{omap => ti}:
Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-18 12:22:43 +00:00
Sara Sharon
344f8e0093 mac80211: don't build AMSDU from GSO packets
If we build AMSDU from GSO packets, it can lead to
bad results if anyone tries to call skb_gso_segment
on the packets.

Signed-off-by: Sara Sharon <sara.sharon@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 13:19:03 +01:00
Johannes Berg
fca1279f09 mac80211: document RCU requirements for ieee80211_tx_dequeue()
In the iwlwifi conversion, we sometimes call this from outside
of the wake_tx_queue() method, and in those cases must be in an
RCU critical section. Document this requirement.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 13:18:30 +01:00
Johannes Berg
233e98dc9c mac80211: remove superfluous NULL check
At the place where this code lives now, the skb can never be
NULL, so we can remove the pointless NULL check.

It seems to exist because this code was moved around a few times
and originally came from a place where it could in fact be NULL.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 13:17:50 +01:00
Johannes Berg
dd665d23c1 mac80211: never pass NULL params to ieee80211_if_add()
This isn't really a problem now, but it means that the function
has a few NULL checks that are only relevant when coming from
the initial interface added in mac80211, and that's confusing.
Just pass non-NULL (but equivalently empty) in that case and
remove all the NULL checks.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 13:17:26 +01:00
Ilan Peer
8020919a9b mac80211: Properly handle SKB with radiotap only
The monitor interface Rx handling of SKBs that contain only
radiotap information was buggy as it tried to access the
SKB assuming it contains a frame.

To fix this, check the RX_FLAG_NO_PSDU flag in the Rx status
(indicting that the SKB contains only radiotap information),
and do not perform data path specific processing when the flag
is set.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 13:15:25 +01:00
Luca Coelho
925b5978cd cfg80211: add some missing fall through annotations
There are talks about enabling -Wimplicit-fallthrough warnings in the
mainline and it is already enabled in linux-next.  Add all the
missing annotations to prevent warnings when this happens.

And in one case, remove the extra text from the annotation so that the
compiler recognizes it.

Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 13:15:08 +01:00
Johannes Berg
30db641ef4 cfg80211: clarify LCI/civic location documentation
The older code and current userspace assumed that this data
is the content of the Measurement Report element, starting
with the Measurement Token. Clarify this in the documentation.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 13:15:04 +01:00
Johannes Berg
554be83330 mac80211: ftm responder: remove pointless defensive coding
The pointer and corresponding length is always set in pairs
in cfg80211, so no need to have this strange defensive check
that also confuses static checkers. Clean it up.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 13:14:58 +01:00
Randy Dunlap
3453de9814 wireless: FTM: fix kernel-doc "cannot understand" warnings
Fix kernel-doc warnings in FTM due to missing "struct" keyword.

Fixes 109 warnings from <net/cfg80211.h>:
../include/net/cfg80211.h:2838: warning: cannot understand function prototype: 'struct cfg80211_ftm_responder_stats '

and fixes 88 warnings from <net/mac80211.h>:
../include/net/mac80211.h:477: warning: cannot understand function prototype: 'struct ieee80211_ftm_responder_params '

Fixes: 81e54d08d9 ("cfg80211: support FTM responder configuration/statistics")
Fixes: bc847970f4 ("mac80211: support FTM responder configuration/statistics")

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 13:14:23 +01:00
Linus Walleij
3e8bf5234e rfkill: gpio: Remove unused include
The legacy <linux/gpio.h> header is no longer in use by the
rfkill driver, so drop this include.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 13:13:56 +01:00
James Prestwood
68406a9807 mac80211_hwsim: fix overwriting of if_combination
Moved setting if_combination.num_different_channels/radar_detect_widths
into an else after use_chanctx. In the case of use_chanctx, these two
settings were getting overwritten.

Signed-off-by: James Prestwood <james.prestwood@linux.intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18 13:13:32 +01:00
Yangtao Li
6848ac7ca3 x86/mm/dump_pagetables: Use DEFINE_SHOW_ATTRIBUTE()
Use DEFINE_SHOW_ATTRIBUTE() instead of open coding it.

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Cc: keescook@chromium.org
Cc: luto@kernel.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: hpa@zytor.com
Link: https://lkml.kernel.org/r/20181119154334.18265-1-tiny.windzz@gmail.com
2018-12-18 13:05:54 +01:00