Commit graph

982,081 commits

Author SHA1 Message Date
Amit Kucheria
e9d753b820 ARM: dts: msm8974: thermal: Add "qcom,sensors" property
This new property allows the number of sensors to be configured from DT
instead of being hardcoded in platform data. Use it.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 09:30:33 -08:00
Amit Kucheria
58443fd910 ARM: dts: msm8974: thermal: split address space into two
We've earlier added support to split the register address space into TM
and SROT regions. Split up the regmap address space into two for msm8974
that has a similar register layout.

Since tsens-common.c/init_common() currently only registers one address
space, the order is important (TM before SROT).  This is OK since the
code doesn't really use the SROT functionality yet.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 09:30:20 -08:00
Amit Kucheria
3c84c05b8b MAINTAINERS: Add entry for Qualcomm TSENS thermal drivers
Create an entry for the TSENS drivers and mark them as maintained

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Rajendra Nayak <rnayak@codeaurora.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 09:28:25 -08:00
Filipe Manana
f505754fd6 Btrfs: ensure path name is null terminated at btrfs_control_ioctl
We were using the path name received from user space without checking that
it is null terminated. While btrfs-progs is well behaved and does proper
validation and null termination, someone could call the ioctl and pass
a non-null terminated patch, leading to buffer overrun problems in the
kernel.  The ioctl is protected by CAP_SYS_ADMIN.

So just set the last byte of the path to a null character, similar to what
we do in other ioctls (add/remove/resize device, snapshot creation, etc).

CC: stable@vger.kernel.org # 4.4+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2018-11-14 18:26:20 +01:00
Jens Axboe
30e066286e nvme: fix boot hang with only being able to get one IRQ vector
NVMe always asks for io_queues + 1 worth of IRQ vectors, which
means that even when we scale all the way down, we still ask
for 2 vectors and get -ENOSPC in return if the system can't
support more than 1.

Getting just 1 vector is fine, it just means that we'll have
1 IO queue and 1 admin queue, with a shared vector between them.
Check for this case and don't add our + 1 if it happens.

Fixes: 3b6592f70a ("nvme: utilize two queue maps, one for reads and one for writes")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-14 10:13:50 -07:00
Nicolin Chen
38cd989ee3 hwmon: (ina2xx) Fix current value calculation
The current register (04h) has a sign bit at MSB. The comments
for this calculation also mention that it's a signed register.

However, the regval is unsigned type so result of calculation
turns out to be an incorrect value when current is negative.

This patch simply fixes this by adding a casting to s16.

Fixes: 5d389b1251 ("hwmon: (ina2xx) Make calibration register value fixed")
Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2018-11-14 09:11:24 -08:00
David S. Miller
6d5db6c379 Merge branch 'nfp-abm-track-all-Qdiscs'
Jakub Kicinski says:

====================
nfp: abm: track all Qdiscs

Our Qdisc offload so far has been very simplistic.  We held
and array of marking thresholds and statistics sized to the
number of PF queues.  This was sufficient since the only
configuration we supported was single layer of RED Qdiscs
(on top of MQ or not, but MQ isn't really about queuing).

As we move to add more Qdiscs it's time to actually try to
track the full Qdisc hierarchy.  This allows us to make sure
our offloaded configuration reflects the SW path better.
We add graft notifications to MQ and RED (PRIO already sends
them) to allow drivers offloading those to learn how Qdiscs
are linked.  MQ graft gives us the obvious advantage of being
able to track when Qdiscs are shared or moved.  It seems
unlikely HW would offload RED's child Qdiscs but since the
behaviour would change based on linked child we should
stop offloading REDs with modified child.  RED will also
handle the child differently during reconfig when limit
parameter is set - so we have to inform the drivers about
the limit, and have them reset the child state when
appropriate.

The NFP driver will now allocate a structure to track each
Qdisc and link it to its children.  We will also maintain
a shadow copy of threshold settings - to save device writes
and make it easier to apply defaults when config is
re-evaluated.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:51:28 -08:00
Jakub Kicinski
bd3b5d462a nfp: abm: restructure Qdisc handling
In preparation of handling more Qdisc types switch to a different
offload strategy.  We have now recreated the Qdisc hierarchy in
the driver.  Every time the hierarchy changes parse it, and update
the configuration of the HW accordingly.

While at it drop the support of pretending that we can instantiate
a single queue on a multi-queue device in HW/FW.  MQ is now required,
and each queue will have its own instance of RED.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:51:28 -08:00
Jakub Kicinski
52db4eaca5 nfp: abm: save RED's parameters
Use the new driver Qdisc structure to keep track of parameters
of RED Qdiscs.  This way as the Qdisc moves around in the hierarchy
we will be able to configure the HW appropriately.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:51:28 -08:00
Jakub Kicinski
6c5dbda0d4 nfp: abm: reset RED's child based on limit
RED qdisc will replace its child Qdisc with a new FIFO queue if
it is reconfigured and the limit parameter is not 0.

This means that when it's created with limit of 0 it will have no FIFO,
and all packets will be dropped.  If it's changed and limit is specified
it will loose its existing child (implicit graft).  Make sure we mark
RED Qdisc child as NFP_QDISC_UNTRACKED if its not the expected FIFO.

nfp_abm_qdisc_replace() will return 1 if Qdisc already existed.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:51:28 -08:00
Jakub Kicinski
c0b7490b19 net: sched: red: notify drivers about RED's limit parameter
RED qdisc's limit parameter changes the behaviour of the qdisc,
for instance if it's set to 0 qdisc will drop all the packets.

When replace operation happens and parameter is set to non-0
a new fifo qdisc will be instantiated and replace the old child
qdisc which will be destroyed.

Drivers need to know the parameter, even if they don't impose
the actual limit to be able to reliably reconstruct the Qdisc
hierarchy.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:51:28 -08:00
Jakub Kicinski
6b8417b7e6 nfp: abm: build full Qdisc hierarchy based on graft notifications
Using graft notifications recreate in the driver the full Qdisc
hierarchy.  Keep track of how many times each Qdisc is attached
to the hierarchy to make sure we don't offload Qdiscs which are
attached multiple times (device queues can't be shared).  For
graft events of Qdiscs we don't know exist make the child as
invalid/untracked.

Note that MQ Qdisc doesn't send destruction events reliably when
device is dismantled, so we need to manually clean out the
children otherwise we'd think Qdiscs which are still in use
are getting freed.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:51:28 -08:00
Jakub Kicinski
d577a3d279 net: sched: mq: offload a graft notification
Drivers offloading Qdiscs should have reasonable certainty
the offloaded behaviour matches the SW path.  This is impossible
if the driver does not know about all Qdiscs or when Qdiscs move
and are reused.  Send a graft notification from MQ.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:51:28 -08:00
Jakub Kicinski
bf2a752bea net: sched: red: offload a graft notification
Drivers offloading Qdiscs should have reasonable certainty
the offloaded behaviour matches the SW path.  This is impossible
if the driver does not know about all Qdiscs or when Qdiscs move
and are reused.  Send a graft notification from RED.  The drivers
are expected to simply stop offloading the Qdisc, if a non-standard
child is ever grafted onto it.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:51:28 -08:00
Jakub Kicinski
aee7539c58 nfp: abm: allocate Qdisc child table
To keep track of Qdisc hierarchy allocate a table for children
for each Qdisc.  RED Qdisc can only have one child.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:51:27 -08:00
Jakub Kicinski
1853125889 nfp: abm: remember which Qdisc is root
Keep track of which Qdisc is currently root.  We need to implement
TC_SETUP_ROOT_QDISC handling, and for completeness also clear the
root Qdisc pointer when it's freed.  TC_SETUP_ROOT_QDISC isn't always
sent when device is dismantled.

Remembering the root Qdisc will allow us to build the entire hierarchy
in following patches.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:51:27 -08:00
Jakub Kicinski
98b0e5f684 net: sched: provide notification for graft on root
Drivers are currently not notified when a Qdisc is grafted as root.
This requires special casing Qdiscs added with parent = TC_H_ROOT in
the driver.  Also there is no notification sent to the driver when
an existing Qdisc is grafted as root.

Add this very simple notifications, drivers should now be able to
track their Qdisc tree fully.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:51:27 -08:00
Jakub Kicinski
4f5681d088 nfp: abm: track all offload-enabled qdiscs
Allocate an object corresponding to any offloaded qdisc we are
informed about by the kernel.  Not only the qdiscs we have a
chance of offloading.

The count of created objects will be used to decide whether
the ethtool TC offload can be disabled, since otherwise we may
miss destroy commands.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:51:27 -08:00
Jakub Kicinski
6666f545e9 nfp: abm: keep track of all RED thresholds
Instead of writing the threshold out when Qdisc is configured
and not remembering it move to a scheme where we remember all
thresholds.  When configuration changes parse the offloaded
Qdiscs and set thresholds appropriately.

This will help future extensions.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:51:27 -08:00
Jakub Kicinski
08990494e5 nfp: abm: rename qdiscs -> red_qdiscs
Rename qdiscs member to red_qdiscs.  One of following patches will
use the name qdiscs for tracking all qdisc types.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: John Hurley <john.hurley@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:51:27 -08:00
David S. Miller
15cef30974 Merge branch 'aquantia-add-rx-flow-filter-support'
Igor Russkikh says:

====================
net: aquantia: add rx-flow filter support

In this patchset the rx-flow filters functionality and vlan filter offloads
are implemented.

The rules in NIC hardware have fixed order and priorities.
To support this, the locations of filters from ethtool perspective are also fixed:

* Locations 0 - 15 for VLAN ID filters
* Locations 16 - 31 for L2 EtherType and PCP filters
* Locations 32 - 39 for L3/L4 5-tuple filters (locations 32, 36 for IPv6)
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:48:37 -08:00
Dmitry Bogdanov
7975d2aff5 net: aquantia: add support of rx-vlan-filter offload
Since it uses the same NIC table as rx flow vlan filter therefore
rx-flow vlan filter accepts only vlans that present on the interface
in case of rx-vlan-filter is on.

Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:48:37 -08:00
Dmitry Bogdanov
9a8cac4b4d net: aquantia: add ethertype and PCP to rx flow filters
L2 EtherType filters allows to filter packet by EtherType field or
both EtherType and User Priority (PCP) field of 802.1Q.
UserPriority (vlan) parameter must be accompanied by mask 0x1FFF. That
is to distinguish VLAN filter from L2 Ethertype filter with
UserPriority since both User Priority and VLAN ID are passed in the
same 'vlan' parameter.

Example:
To add a filter that directs IP4 packess of priority 3 to queue 3:
ethtool -N <ethX> flow-type ether proto 0x800 vlan 0x600 m 0x1FFF \
action 3 loc 16

Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:48:37 -08:00
Dmitry Bogdanov
54bcb3d162 net: aquantia: add vlan id to rx flow filters
The VLAN filter (VLAN id) is compared against 16 filters.
VLAN id must be accompanied by mask 0xF000. That is to distinguish
VLAN filter from L2 Ethertype filter with UserPriority since both
User Priority and VLAN ID are passed in the same 'vlan' parameter.
Flow type may be any as  it is not matched for VLAN filter.
Due to fixed order of the rules in the NIC, the location 0-15 are
reserved for vlan filters.

Example:
To add a rule that directs packets from VLAN 2001 to queue 5:
ethtool -N <ethX> flow-type ip4 vlan 2001 m 0xF000 action 5 loc 0

Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:48:37 -08:00
Dmitry Bogdanov
a6ed6f2269 net: aquantia: add support of L3/L4 ntuple filters
Add support of L3/L4 5-tuple {protocol, src-ip, dst-ip, src-port, dst-port}
filters. Mask is not supported. Src-port and dst-port are only compared for
TCP/UDP/SCTP packets. Both IPv4 and IPv6 are supported.
The supported actions are the drop and the queue assignment.
Due to fixed order of the rules in the NIC, the location 32-39 are
reserved for L3/L4 5-tuple filters. The locations 32 and 36 are
reserved for IPv6 filters.

Examples:
sudo ethtool -N eth0 flow-type ip6 src-ip 2001:db8:0:f101::2 \
dst-ip 2001:db8:0:f101::5 action -1 loc 36

sudo ethtool -N eth0 flow-type udp4 src-ip 10.0.0.4 \
dst-ip 10.0.0.7 src-port 2000 dst-port 2001 action 2 loc 32

Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:48:37 -08:00
Dmitry Bogdanov
8d0bcb012f net: aquantia: add infrastructure for ntuple rules
Add infrastructure to support ntuple filter configuration.
Add rule, remove rule, reapply on interface up.

Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:48:37 -08:00
Dmitry Bogdanov
23e7a718a4 net: aquantia: add rx-flow filter definitions
Add missing register definitions and the functions accessing them
related to rx-flow filters.

Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 08:48:37 -08:00
Ming Lei
8dc765d438 SCSI: fix queue cleanup race before queue initialization is done
c2856ae2f3 ("blk-mq: quiesce queue before freeing queue") has
already fixed this race, however the implied synchronize_rcu()
in blk_mq_quiesce_queue() can slow down LUN probe a lot, so caused
performance regression.

Then 1311326cf4 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
tried to quiesce queue for avoiding unnecessary synchronize_rcu()
only when queue initialization is done, because it is usual to see
lots of inexistent LUNs which need to be probed.

However, turns out it isn't safe to quiesce queue only when queue
initialization is done. Because when one SCSI command is completed,
the user of sending command can be waken up immediately, then the
scsi device may be removed, meantime the run queue in scsi_end_request()
is still in-progress, so kernel panic can be caused.

In Red Hat QE lab, there are several reports about this kind of kernel
panic triggered during kernel booting.

This patch tries to address the issue by grabing one queue usage
counter during freeing one request and the following run queue.

Fixes: 1311326cf4 ("blk-mq: avoid to synchronize rcu inside blk_cleanup_queue()")
Cc: Andrew Jones <drjones@redhat.com>
Cc: Bart Van Assche <bart.vanassche@wdc.com>
Cc: linux-scsi@vger.kernel.org
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
Cc: stable <stable@vger.kernel.org>
Cc: jianchao.wang <jianchao.w.wang@oracle.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-14 08:19:10 -07:00
Dave Chinner
4800bf7bc8 block: fix 32 bit overflow in __blkdev_issue_discard()
A discard cleanup merged into 4.20-rc2 causes fstests xfs/259 to
fall into an endless loop in the discard code. The test is creating
a device that is exactly 2^32 sectors in size to test mkfs boundary
conditions around the 32 bit sector overflow region.

mkfs issues a discard for the entire device size by default, and
hence this throws a sector count of 2^32 into
blkdev_issue_discard(). It takes the number of sectors to discard as
a sector_t - a 64 bit value.

The commit ba5d73851e ("block: cleanup __blkdev_issue_discard")
takes this sector count and casts it to a 32 bit value before
comapring it against the maximum allowed discard size the device
has. This truncates away the upper 32 bits, and so if the lower 32
bits of the sector count is zero, it starts issuing discards of
length 0. This causes the code to fall into an endless loop, issuing
a zero length discards over and over again on the same sector.

Fixes: ba5d73851e ("block: cleanup __blkdev_issue_discard")
Tested-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>

Killed pointless WARN_ON().

Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-14 08:17:18 -07:00
YueHaibing
55a2a982d3 drm/qxl: remove set but not used variables 'driver, qbo'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/qxl/qxl_release.c: In function 'qxl_release_fence_buffer_objects':
drivers/gpu/drm/qxl/qxl_release.c:431:17: warning:
 variable 'qbo' set but not used [-Wunused-but-set-variable]

drivers/gpu/drm/qxl/qxl_release.c:430:24: warning:
 variable 'driver' set but not used [-Wunused-but-set-variable]

'qbo' not used since commit f2c24b83ae ("drm/ttm: flip the switch, and convert
to dma_fence")

And 'driver' never used since introduction in
8002db6336 ("qxl: convert qxl driver to proper use for reservations")

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1542029556-88107-1-git-send-email-yuehaibing@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-14 14:21:04 +01:00
YueHaibing
45230903ec drm/qxl: remove set but not used variable 'map'
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/gpu/drm/qxl/qxl_object.c: In function 'qxl_bo_kunmap_atomic_page':
drivers/gpu/drm/qxl/qxl_object.c:189:21: warning:
 variable 'map' set but not used [-Wunused-but-set-variable]

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1541821486-40631-1-git-send-email-yuehaibing@huawei.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-14 14:21:04 +01:00
Colin Ian King
040b595a91 drm/virtio: fix memory leak of vfpriv on error return path
The allocation for vfpriv is being leaked on an error return path,
fix this by kfree'ing it before returning.

Detected by CoverityScan, CID#1475380 ("Resource Leak")

Fixes: 6a37c49a94 ("drm/virtio: Handle context ID allocation errors")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181107203122.6861-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-14 14:21:03 +01:00
Gustavo Padovan
6862965261 drm/virtio: bump driver version after explicit synchronization addition
To reflect the (backward compatible) changes in the uabi we are bumping
the driver's version.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181112165157.32765-5-robert.foss@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-14 14:21:02 +01:00
Robert Foss
2cd7b6f08b drm/virtio: add in/out fence support for explicit synchronization
When the execbuf call receives an in-fence it will get the dma_fence
related to that fence fd and wait on it before submitting the draw call.

On the out-fence side we get fence returned by the submitted draw call
and attach it to a sync_file and send the sync_file fd to userspace. On
error -1 is returned to userspace.

VIRTGPU_EXECBUF_FENCE_FD_IN & VIRTGPU_EXECBUF_FENCE_FD_OUT
are supported at the simultaneously and can be flagged
for simultaneously.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181112165157.32765-4-robert.foss@collabora.com
Suggested-by: Rob Herring <robh@kernel.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-14 14:21:02 +01:00
Robert Foss
a56f9c868c drm/virtio: add uapi for in and out explicit fences
Add a new field called fence_fd that will be used by userspace to send
in-fences to the kernel and receive out-fences created by the kernel.

This uapi enables virtio to take advantage of explicit synchronization of
dma-bufs.

There are two new flags:

* VIRTGPU_EXECBUF_FENCE_FD_IN to be used when passing an in-fence fd.
* VIRTGPU_EXECBUF_FENCE_FD_OUT to be used when requesting an out-fence fd

The execbuffer IOCTL is now read-write to allow the userspace to read the
out-fence.

On error -1 should be returned in the fence_fd field.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181112165157.32765-3-robert.foss@collabora.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-14 14:21:01 +01:00
Robert Foss
9fdd90c0f4 drm/virtio: add virtio_gpu_alloc_fence()
Refactor fence creation, add fences to relevant GPU
operations and add cursor helper functions.

This removes the potential for allocation failures from the
cmd_submit and atomic_commit paths.
Now a fence will be allocated first and only after that
will we proceed with the rest of the execution.

Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.com>
Signed-off-by: Robert Foss <robert.foss@collabora.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20181112165157.32765-2-robert.foss@collabora.com
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-14 14:21:01 +01:00
Borislav Petkov
8e1599fcac x86/traps: Complete prototype declarations
... with proper variable names.

No functional changes.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: <x86@kernel.org>
Link: https://lkml.kernel.org/r/20181110141647.GA20073@zn.tnic
2018-11-14 13:46:29 +01:00
Borislav Petkov
68b5e4326e x86/mce: Fix -Wmissing-prototypes warnings
Add the proper includes and make smca_get_name() static.

Fix an actual bug too which the warning triggered:

  arch/x86/kernel/cpu/mcheck/therm_throt.c:395:39: error: conflicting \
  types for ‘smp_thermal_interrupt’
   asmlinkage __visible void __irq_entry smp_thermal_interrupt(struct pt_regs *r)
                                         ^~~~~~~~~~~~~~~~~~~~~
  In file included from arch/x86/kernel/cpu/mcheck/therm_throt.c:29:
  ./arch/x86/include/asm/traps.h:107:17: note: previous declaration of \
	  ‘smp_thermal_interrupt’ was here
   asmlinkage void smp_thermal_interrupt(void);

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Yi Wang <wang.yi59@zte.com.cn>
Cc: Michael Matz <matz@suse.de>
Cc: x86@kernel.org
Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1811081633160.1549@nanos.tec.linutronix.de
2018-11-14 13:46:26 +01:00
Thomas Richter
613a41b0d1 s390/cpum_cf: Reject request for sampling in event initialization
On s390 command perf top fails
[root@s35lp76 perf] # ./perf top -F100000  --stdio
   Error:
   cycles: PMU Hardware doesn't support sampling/overflow-interrupts.
   	Try 'perf stat'
[root@s35lp76 perf] #

Using event -e rb0000 works as designed.  Event rb0000 is the event
number of the sampling facility for basic sampling.

During system start up the following PMUs are installed in the kernel's
PMU list (from head to tail):
   cpum_cf --> s390 PMU counter facility device driver
   cpum_sf --> s390 PMU sampling facility device driver
   uprobe
   kprobe
   tracepoint
   task_clock
   cpu_clock

Perf top executes following functions and calls perf_event_open(2) system
call with different parameters many times:

cmd_top
--> __cmd_top
    --> perf_evlist__add_default
        --> __perf_evlist__add_default
            --> perf_evlist__new_cycles (creates event type:0 (HW)
			    		config 0 (CPU_CYCLES)
	        --> perf_event_attr__set_max_precise_ip
		    Uses perf_event_open(2) to detect correct
		    precise_ip level. Fails 3 times on s390 which is ok.

Then functions cmd_top
--> __cmd_top
    --> perf_top__start_counters
        -->perf_evlist__config
	   --> perf_can_comm_exec
               --> perf_probe_api
	           This functions test support for the following events:
		   "cycles:u", "instructions:u", "cpu-clock:u" using
		   --> perf_do_probe_api
		       --> perf_event_open_cloexec
		           Test the close on exec flag support with
			   perf_event_open(2).
	               perf_do_probe_api returns true if the event is
		       supported.
		       The function returns true because event cpu-clock is
		       supported by the PMU cpu_clock.
	               This is achieved by many calls to perf_event_open(2).

Function perf_top__start_counters now calls perf_evsel__open() for every
event, which is the default event cpu_cycles (config:0) and type HARDWARE
(type:0) which a predfined frequence of 4000.

Given the above order of the PMU list, the PMU cpum_cf gets called first
and returns 0, which indicates support for this sampling. The event is
fully allocated in the function perf_event_open (file kernel/event/core.c
near line 10521 and the following check fails:

        event = perf_event_alloc(&attr, cpu, task, group_leader, NULL,
		                 NULL, NULL, cgroup_fd);
	if (IS_ERR(event)) {
		err = PTR_ERR(event);
		goto err_cred;
	}

        if (is_sampling_event(event)) {
		if (event->pmu->capabilities & PERF_PMU_CAP_NO_INTERRUPT) {
			err = -EOPNOTSUPP;
			goto err_alloc;
		}
	}

The check for the interrupt capabilities fails and the system call
perf_event_open() returns -EOPNOTSUPP (-95).

Add a check to return -ENODEV when sampling is requested in PMU cpum_cf.
This allows common kernel code in the perf_event_open() system call to
test the next PMU in above list.

Fixes: 97b1198fec (" "s390, perf: Use common PMU interrupt disabled code")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-11-14 13:44:55 +01:00
Chengguang Xu
569ae92094 ext2: remove redundant condition check
ext2_xattr_destroy_cache() can handle NULL pointer correctly,
so there is no need to check NULL pointer before calling
ext2_xattr_destroy_cache().

Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jan Kara <jack@suse.cz>
2018-11-14 13:14:56 +01:00
Matthew Wilcox
2ae7f165c0 drm/virtio: Use IDAs more efficiently
0-based IDAs are more efficient than any other base.  Convert the
1-based IDAs to be 0-based.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20181030165352.13065-2-willy@infradead.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-14 12:50:34 +01:00
Matthew Wilcox
556c62e85f drm/virtio: Handle error from virtio_gpu_resource_id_get
ida_alloc() can return -ENOMEM in the highly unlikely case we run out
of memory.  The current code creates an object with an invalid ID.

Signed-off-by: Matthew Wilcox <willy@infradead.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20181030165352.13065-1-willy@infradead.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-11-14 12:50:34 +01:00
Imre Deak
fa96ed1f56 drm/i915: Remove special case for power well 1/MISC_IO state verification
Even though PW#1 and the MISC_IO power wells are managed by the
DMC firmware (toggled dynamically if conditions allow it) from the
driver's POV they are always on if the display core is initialized
(always restored by DMC to the enabled state after exiting from DC5/6
for instance b/c of MMIO access). Accordingly we can just mark them as
always-on and remove the special casing for them during state
verification (thus enabling verification for these power wells too).

Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181109145822.15446-3-imre.deak@intel.com
2018-11-14 13:45:36 +02:00
Imre Deak
285cf66d52 drm/i915: Use proper bool bitfield initializer in power well descs
We can just use a proper true/false initializer even for bitfields,
which is more descriptive.

Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181109145822.15446-2-imre.deak@intel.com
2018-11-14 13:45:31 +02:00
Imre Deak
cb8ef723ab drm/i915/gen9_bc: Work around DMC bug zeroing power well requests
A DMC bug on GEN9 big core machines fails to restore the driver's
request bits for the PW1 and MISC_IO power wells after a DC5/6
entry->exit sequence. As a consequence the driver's subsequent check for
the enabled status of these power wells will fail, as the check
considers the power wells being enabled only if both the status and
request bits are set. To work around this borrow the request bits from
BIOS's own request register in which DMC forces on the request bits when
exiting from DC5/6.

This fixes a problem reported by Ramalingam, where HDCP init failed,
since PW1 reported itself as being disabled, while in reality it was
enabled.

Reported-by: Ramalingam C <ramalingam.c@intel.com>
Cc: Ramalingam C <ramalingam.c@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181109145822.15446-1-imre.deak@intel.com
2018-11-14 13:45:15 +02:00
Mika Kuoppala
a22612301a drm/i915/icl: Drop spurious register read from icl_dbuf_slices_update
Register DBUF_CTL_S2 is read and it's value is not used. As
there is no explanation why we should prime the hardware with
read, remove it as spurious.

Fixes: aa9664ffe8 ("drm/i915/icl: Enable 2nd DBuf slice only when needed")
Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181109140924.2663-1-mika.kuoppala@linux.intel.com
(cherry picked from commit 8577c319b6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-14 13:17:45 +02:00
Lionel Landwerlin
6a67a20366 drm/i915: fix broadwell EU computation
subslice_mask is an array indexed by slice, not subslice.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 8cc7669355 ("drm/i915: store all subslice masks")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108712
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181112123931.2815-1-lionel.g.landwerlin@intel.com
(cherry picked from commit 63ac3328f0)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
2018-11-14 13:17:33 +02:00
Felipe Balbi
2fc6d4be35 usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers
When chaining ISOC TRBs together, only the first ISOC TRB should be of
type ISOC_FIRST, all others should be of type ISOC. This patch fixes
that.

Fixes: c6267a5163 ("usb: dwc3: gadget: align transfers to wMaxPacketSize")
Cc: <stable@vger.kernel.org> # v4.11+
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-11-14 12:43:52 +02:00
Christophe JAILLET
b28cc6cec3 rtc: max77686: Fix the returned value in case of error in 'max77686_rtc_read_time()'
In case of error, we return 0.
This is spurious and not consistent with the other functions of the driver.
Commit e115a2bf14 has modified more than what is said in the commit
message. Reverse part of it znd return an error when needed, as it was
previously.

Fixes: e115a2bf14 ("rtc: max77686: stop validating rtc_time in .read_time")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-11-14 10:44:43 +01:00
Marek Szyprowski
50c8aec421 rtc: s3c-rtc: Avoid using broken ALMYEAR register
(RTC,ALM)YEAR registers of Exynos built-in RTC device contains 3 BCD
characters. s3c-rtc driver uses only 2 lower of them and supports years
from 2000..2099 range. The third BCD value is typically set to 0, but it
looks that handling of it is broken in the hardware. It sometimes
defaults to a random (even non-BCD) value. This is not an issue
for handling RTCYEAR register, because bcd2bin() properly handles only
8bit values (2 BCD characters, the third one is skipped). The problem
is however with ALMYEAR register and proper RTC alarm operation. When
YEAREN bit is set for the configured alarm, RTC hardware triggers alarm
only when ALMYEAR and RTCYEAR matches. This usually doesn't happen
because of the random noise on the third BCD character.

Fix this by simply skipping setting ALMYEAR register in alarm
configuration. This workaround fixes broken alarm operation on Exynos
built-in rtc device. My tests revealed that the issue happens on the
following Exynos series: 3250, 4210, 4412, 5250 and 5410.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-11-14 10:44:36 +01:00