Commit graph

982,081 commits

Author SHA1 Message Date
Ursula Braun
007b656851 s390/ism: clear dmbe_mask bit before SMC IRQ handling
SMC-D stress workload showed connection stalls. Since the firmware
decides to skip raising an interrupt if the SBA DMBE mask bit is
still set, this SBA DMBE mask bit should be cleared before the
IRQ handling in the SMC code runs. Otherwise there are small windows
possible with missing interrupts for incoming data.
SMC-D currently does not care about the old value of the SBA DMBE
mask.

Acked-by: Sebastian Ott <sebott@linux.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-14 14:21:20 -08:00
Tony Xie
43fac3238c
regmap: add a new macro:REGMAP_IRQ_REG_LINE(_id, _reg_bits)
if there are lots of irqs for a device and the register addresses for these
irqs is continuous, we can use this macro to initialize regmap_irq value.

Signed-off-by: Tony Xie <tony.xie@rock-chips.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-14 14:20:45 -08:00
Stefan Wahren
22bf6cd2ca
spi: bcm2835: make license text and module license match
The license text is specifying GPL v2 or later but the MODULE_LICENSE
is set to GPL v2 which means GNU Public License v2 only. So choose the
license text as the correct one.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Acked-by: Florian Kauer <florian.kauer@koalo.de>
Acked-by: Martin Sperl <kernel@martin.sperl.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-14 14:18:18 -08:00
Peter Ujfalusi
76836fd354
ASoC: omap-abe-twl6040: Fix missing audio card caused by deferred probing
The machine driver fails to probe in next-20181113 with:

[    2.539093] omap-abe-twl6040 sound: ASoC: CODEC DAI twl6040-legacy not registered
[    2.546630] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -517
...
[    3.693206] omap-abe-twl6040 sound: ASoC: Both platform name/of_node are set for TWL6040
[    3.701446] omap-abe-twl6040 sound: ASoC: failed to init link TWL6040
[    3.708007] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -22
[    3.715148] omap-abe-twl6040: probe of sound failed with error -22

Bisect pointed to a merge commit:
first bad commit: [0f688ab20a540aafa984c5dbd68a71debebf4d7f] Merge remote-tracking branch 'net-next/master'

and a diff between a working kernel does not reveal anything which would
explain the change in behavior.

Further investigation showed that on the second try of loading fails
because the dai_link->platform is no longer NULL and it might be pointing
to uninitialized memory.

The fix is to move the snd_soc_dai_link and snd_soc_card inside of the
abe_twl6040 struct, which is dynamically allocated every time the driver
probes.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-14 14:07:52 -08:00
Colin Ian King
757ec116c9
spi: npcm: fix u32 csgpio being checked for less than zero
The u32 variable csgpio is being checked for an error return
from the call to of_get_named_gpio, however, since this is unsigned
this comparison will always be false. Fix this by making csgpio an
int and fix up the %u format specifiers to %d accordingly.

Detected by CoverityScan, CID#1475476 ("Unsigned compared against 0")

Fixes: 2a22f1b30c ("spi: npcm: add NPCM PSPI controller driver")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-14 14:02:33 -08:00
Colin Ian King
46dce40426
ASoC: amd: fix memory leak of i2s_data on error return
Currently when snd_pcm_hw_constraint_integer fails there is
a memory leak of i2s_data on the error return path. Fix this by
kfree'ing i2s_data before returning.

Detected by CoverityScan, CID#1475479 ("Resource leak")

Fixes: 0b87d6bcd6 ("ASoC: amd: add acp3x pcm driver dma ops")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-14 14:01:02 -08:00
Linus Torvalds
3472f66013 ACPI fix for 4.20-rc3
Fix a recently introduced build issue in the xpower PMIC
 driver (Arnd Bergmann).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJb52RGAAoJEILEb/54YlRxbbAQALJ69mrmh46sfHwyWm+s/F6+
 P2KpQIqCdAxRooZllsWw9X+e+ORABfAX6sAalXeEAF++7J7yR6sbbiDyP483/uJC
 tY357eH9XtKddTwH/JFF0XRSejDYxnJOwiMbcau3eG+XDAMXjZp1GA27qG0MHy/T
 PfVJsefsN4X9TSCEARXTqrrIkLVI+57P2k2pqIiKv4hXRU5NyS2UDootBrY3rdbY
 NWQbNpXjerxj9OcogxwyqKp3vS9kTGhucJ9BwfdKAx+jNMd/K5m+ghcf751aD28F
 wAZEqn0ptCq4hsebdrXubZcDftA6XlJ33OTzVGxTH91N4r6e5ezTHs5ptFa3rj+d
 h4gNsy9yw7fNoc2Zh1hr6O42ahep1lJd1MAxbR8h00lEXBLRiNWJkByHimvXfOLZ
 QLP6iwecOZbA5He02EKP51NlQ8S2x19LR20tF+ebhzcPiYio7teK1ILlG70waLn8
 aeB0R46dkInbeFwI3CAjGpnI+mUXhy9ALUnZrXUL4uh+/5QfVp+H3EfvolqfUOaG
 ZmDdbazRy3BqeDXhtPSVtKRbe+eVQy2OqQMIf4KtzqBNBXJ2v0biy4YWXa3YZJBk
 XK0XOxRmotbl9BUq9aHmrAPPpgQeg2SV+hL4nPgMh+meiD9yD64d9g/QnSqxm26P
 74fBSOKUAJW21pfFA7fw
 =HEix
 -----END PGP SIGNATURE-----

Merge tag 'acpi-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull ACPI fix from Rafael Wysocki:
 "Fix a recently introduced build issue in the xpower PMIC driver (Arnd
  Bergmann)"

* tag 'acpi-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / PMIC: xpower: fix IOSF_MBI dependency
2018-11-14 15:36:45 -06:00
Linus Torvalds
dbb3c26034 Power management updates for 4.20-rc3
- Drop stale DT binding for the arm_big_little_dt driver removed
    recently (Sudeep Holla).
 
  - Fix up error handling in the imx6q cpufreq driver to make it
    report voltage scaling failures (Anson Huang).
 
  - Fix two issues in the cpufreq documentation (Viresh Kumar,
    Zhao Wei Liew).
 
  - Fix ARM cpuidle driver initialization regression from the 4.19
    time frame and rework the driver registration part of it to
    simplify code (Ulf Hansson).
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQIcBAABCAAGBQJb52PfAAoJEILEb/54YlRxNFkQAKo8PzF5+/Pv5HKbO3RikV0z
 QC10m0VrjeIIhE27RNQMyqm/n+qjq1kmYewuGQpbQ4WVafhZQz/2MPz9nhfEWzL1
 G8GttmC7nGB3eWKtpj95mwvrKKgOtLJ5ZG8DXFGaplzGaD3sf8gRxZYQ/CoK8gez
 gbRZz2UkII4TLQTv0pDEdXJVMa5nvGJJsUVpu9nKg9/hR0irY9og/S5ZB+5uQ2gJ
 cBq12DKBeSXT/p4kVoWnRoOoyzD0qHr+ZiAUWNqkuX/DCXMxPS+Uw3g+UuboqmF1
 kG4D6Rqc1cXW742lv/8DJewyz7pIiLyxTkGKhEXEhp83dKabeaq++LNJ0HFzU9YW
 OeXXeLQqf4vDdugJj1CIiY6z4UJoSUq+Qlt5Iue2AozB10YSyOJBsD7EbScZmFM9
 opuFZ+kQCDkhnZkTBuChYeSrw41D7nCIPBHvRujXEwBEFDPm+3K7vFYj3PbBp3dc
 rWzAQKFjmxyC3ufoG8T0WXTdKw2sCNSoBL8Dzn5j4nN2R7oV6/bjj0UmeuFACHZ3
 +8nGDpktkpbS6Q0PVaJov5NLx/QYxAyMDjm7ucjnR0I+FUxr2wAImElVG14u1SgD
 b2yjvdXA+xM0LJz2c/in4MhxOqz+3iu/szO9kNj5WYMqyzwObAXTvFC8WPqm25SY
 cLdZAPbC4Qo/6qtf6GIJ
 =RD7r
 -----END PGP SIGNATURE-----

Merge tag 'pm-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These remove a stale DT entry left behind after recent removal of a
  cpufreq driver without users, fix up error handling in the imx6q
  cpufreq driver, fix two issues in the cpufreq documentation, and
  update the ARM cpufreq driver.

  Specifics:

   - Drop stale DT binding for the arm_big_little_dt driver removed
     recently (Sudeep Holla).

   - Fix up error handling in the imx6q cpufreq driver to make it report
     voltage scaling failures (Anson Huang).

   - Fix two issues in the cpufreq documentation (Viresh Kumar, Zhao Wei
     Liew).

   - Fix ARM cpuidle driver initialization regression from the 4.19 time
     frame and rework the driver registration part of it to simplify
     code (Ulf Hansson)"

* tag 'pm-4.20-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ARM: cpuidle: Convert to use cpuidle_register|unregister()
  ARM: cpuidle: Don't register the driver when back-end init returns -ENXIO
  dt-bindings: cpufreq: remove stale arm_big_little_dt entry
  Documentation: cpufreq: Correct a typo
  cpufreq: imx6q: add return value check for voltage scale
  Documentation: cpu-freq: Frequencies aren't always sorted
2018-11-14 15:33:45 -06:00
Linus Torvalds
4e4490d438 Three nfsd bugfixes. None are new bugs, but they all take a little
effort to hit, which might explain why they weren't found sooner.
 -----BEGIN PGP SIGNATURE-----
 
 iQIcBAABAgAGBQJb6zwdAAoJECebzXlCjuG+SLMP/AlpI+vPV7DdCLRWGCY1ZMjk
 5pxIS+74mD2EopBYgZY58L1fxWgv2bLOiAs/baAlNpkjTNX3wlxXGTu9IzVdPOn7
 3n+W2Rb+mXEFaag7mP8RFpOvt7Yb3p4DObGpg7TKWJZ6r/8xcxQWQO+e0iiS5+XK
 EOiaFcGmYlOC1JtrRIL2fr16trXUhT1gz7qAZgKBzebbEdn4FfdsdwHm7nUyRB3I
 LhCMV35RfzOBC2C/kQzlHaHYlo0dx5lKMtVzvtgMdpgXr4QXE/7Ke/ANQ7oGfhhO
 9uX0Uf18HmeGRejK9QoMha7VWuwh5pyHBq0ppMpGL2jb11BD/l9iXgS+vTxpA2B0
 YIiSOnaiDFsEk6hMsFqueVIdaTrarcjg/S2mh2QDjtkXKS3L0W6/7v97JJHu9J4l
 6zxiT6Crq2p8pMZ5gY3RI1AYllW/K+TRoccLhO+q19g3q1HWxP6DyeFBgNF66/ha
 NtmQP+94IkaCS70zirpEu/OeUMviQgX2x77OReyibHLA4+R+hNHwtR67BLl+xG0G
 jmKHfqqX7offFaHmsoD8kK3gpKtit0/py9Hp7gXQg4vU5iL512gI83ICEOEkZMXn
 Ppsrl1HyoO/ohY/USpMvRqYHjM1ZGew19ZzD7SId6vUVaYjQIEsjQVnycK3h+gSb
 otk5pc3bWPCwa8csOWPs
 =+1Ub
 -----END PGP SIGNATURE-----

Merge tag 'nfsd-4.20-1' of git://linux-nfs.org/~bfields/linux

Pull nfsd fixes from Bruce Fields:
 "Three nfsd bugfixes.

  None are new bugs, but they all take a little effort to hit, which
  might explain why they weren't found sooner"

* tag 'nfsd-4.20-1' of git://linux-nfs.org/~bfields/linux:
  SUNRPC: drop pointless static qualifier in xdr_get_next_encode_buffer()
  nfsd: COPY and CLONE operations require the saved filehandle to be set
  sunrpc: correct the computation for page_ptr when truncating
2018-11-14 15:31:15 -06:00
Stefan Wahren
bb661b7088 soc: bcm: Switch raspberrypi-power to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Cc: Alexander Aring <aring@mojatatu.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
2018-11-14 21:04:47 +01:00
Stefan Wahren
7b369a42e6 ARM: mach-bcm: Switch bcm2835 and platsmp to SPDX identifier
Adopt the SPDX license identifier headers to ease license compliance
management.

Cc: Simon Arlott <simon@arlott.org>
Cc: Kapil Hali <kapilh@broadcom.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
2018-11-14 20:55:30 +01:00
Linus Torvalds
d41217aac0 pci-v4.20-fixes-1
-----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEgMe7l+5h9hnxdsnuWYigwDrT+vwFAlvrvDcUHGJoZWxnYWFz
 QGdvb2dsZS5jb20ACgkQWYigwDrT+vxUKhAAudr1ncagR0xW2jn6QdRHiCbINCPu
 qb7xwwbgrQ7CK8iF85PizIZ+TWBJhc6Od2itzAzUDJR1kENMwVcFLxEC9G+9Yf19
 b69lvanRIO5z6SctHa9XS1YDY7+LYjAY/m5LPCplzYZ2ueFY2bJzA0NdmNFkoSsJ
 Yz1iiyf3UHlZH61K8hjkco2CxXAUJefxRyOzC9a7ZdWQp4WAkb6rt7yjZXNkYECl
 Iln6Gdhg7Ad9u/IFeti56ZSzl14RTLom2zvoaM78OldU1IThNvtZ1GGGka/mJfsc
 M69HcSZJo0xLKyvqxEv+qZulTRl6kpqSC9AT3XOvYWrY6isRAzD9t8bufUM+i20d
 hlh5AAw4kbI848mipV1RoHXExLtZ4sTkhkvMlC4FBCrxQSOCcLkkInS/VlAX+FZc
 NvB2U6hZbYUipCWG+49anHRz6lmHgDyGGnmyket2f5OOC2wdALq67cSJODApMX9a
 Kgkk3EyMJkE1Ei/Z8EW5zhkzBL8ghQQZddJ3qc7JbxoozGMZ1vkFftkNUYQ6y8yM
 5U/d/H7HCJsOynHyRN32cI11vAjT0xPVnluciaiZVrBDLRGhdFWbMeHUtvrTkHyc
 88rZiNnRp7EQJpxSMWphr2nArzyZSJw1IrCXbe2tajxjF3iXJh9Ry/AsFHlwhEw9
 JpjQ0Q+ffSewqaw=
 =g1QG
 -----END PGP SIGNATURE-----

Merge tag 'pci-v4.20-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI fix from Bjorn Helgaas:
 "Revert a _PXM change that causes silent early boot failure on some AMD
  ThreadRipper systems"

* tag 'pci-v4.20-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  Revert "ACPI/PCI: Pay attention to device-specific _PXM node values"
2018-11-14 13:51:47 -06:00
Linus Torvalds
dbcec2e6bc SCSI fixes on 20181113
This is mostly a set of minor and obvious fixes (three in one of the
 new drivers).  The only substantial change is to move the ufs to the
 blk-mq now that the merge window fixed the suspend/resume issues with
 blk-mq.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW+rtiiYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishR9AAQC0/z2K
 IIUFGVqA3yG9fy2njzGyYFuruqqAL1PKySmzDwD+NBUGV6V27bHMfJhVC/0TM+nN
 dCbuc3FT9rlKH8ot3/k=
 =EvLF
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "This is mostly a set of minor and obvious fixes (three in one of the
  new drivers).

  The only substantial change is to move the ufs to the blk-mq now that
  the merge window fixed the suspend/resume issues with blk-mq"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: qla2xxx: Initialize port speed to avoid setting lower speed
  Revert "scsi: ufs: Disable blk-mq for now"
  scsi: NCR5380: Return false instead of NULL
  scsi: qla2xxx: Fix a typo in MODULE_PARM_DESC
  scsi: hisi_sas: Remove set but not used variable 'dq_list'
  scsi: myrs: only build on little-endian platforms
  scsi: myrs: avoid stack overflow warning
  scsi: lpfc: fix remoteport access
  scsi: myrb: fix sprintf buffer overflow warning
  scsi: target/core: Avoid that a kernel oops is triggered when COMPARE AND WRITE fails
2018-11-14 13:49:29 -06:00
Linus Torvalds
b7bbf9935f RTC fixes for 4.20
Drivers:
  - cmos: stop exporting alarms when not supported
  - hctosys: correctly report range error
  - pcf2127: fix a memory leak
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEXx9Viay1+e7J/aM4AyWl4gNJNJIFAlvp+EIACgkQAyWl4gNJ
 NJJt0w/7BK1Gym0wmzKdLs/yg3LsU7t9HbQk1YeoFrLDwGdPoCNxBG46yKaHQt+1
 03qnSDSHrc95+TbL7y4EIpl0ka6gZUSBmpzJlNYHYYPO5k3bnX7aNY6pIwVqKc+r
 6TlTFS8VymNR0B7Rn7GcIUFbeCv7keiq2kC3uvE6VLb/221bU/68BPWC6SC4dSrB
 sD8xqQcyrNwz72nZez8GhdtoMYV8JvMewKhBSSTya8P0VoHJw4PzZ1vEeem13VJl
 cveDgjM2SVyL8clgXrOofj9mEDI+DqzhUcd3VaK1tcWr+JH3zjWsYdw4yQNg+I6N
 ivw0Ti6h3KYM7VhFwVIu2hxyHFD35E/zZRw4Wc487decXHHo8CQNxavCt1jW3Xc7
 Jyo6JnPsl3gCX2VgbZK0PjWuSaRILI1Sq95fBRnbZOhlcYbHPD19gm+gS/HUA/Ac
 CMTPJBVNisnEwgDVnkro0yyLT2U/cnVfQTI424TiRfDEZNhHFxlyA34UK1spEew3
 P/O59zYhHx8RZfiuS/ZMBp2m/YU24mkN+JMhgdkn3eCAyTBVrzNOhlQSuSvpi+yf
 JM6Ryfs4LkQ2/swWgRud+N9pI6ceDUj1liHth29lSVnw4qvn6Vvc1+Zshq+55NMQ
 fHiOlNLWLPGeMhDF3sJp2C1WpZS5meyDswzUKuHPFWuR9LmjH40=
 =B3f6
 -----END PGP SIGNATURE-----

Merge tag 'rtc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC driver fixes from Alexandre Belloni:

 - cmos: stop exporting alarms when not supported

 - hctosys: correctly report range error

 - pcf2127: fix a memory leak

* tag 'rtc-4.20-2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  rtc: pcf2127: fix a kmemleak caused in pcf2127_i2c_gather_write
  rtc: hctosys: Add missing range error reporting
  rtc: cmos: Do not export alarm rtc_ops when we do not support alarms
2018-11-14 13:47:15 -06:00
Stefan Wahren
0829187b17 firmware: raspberrypi: Define timeout for transactions
We should never assume to get a reply from the firmware otherwise
the call could block forever and the user don't get informed. So
define a timeout of 1 sec and print a stacktrace once in the unlikely
case the timeout expired.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
2018-11-14 20:46:18 +01:00
Linus Torvalds
47e624c030 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull namespace fix from Eric Biederman:
 "Benjamin Coddington noticed an unkillable busy loop in the kernel that
  anyone who is sufficiently motivated can trigger. This bug did not
  exist in earlier kernels making this bug a regression.

  I have tested the change personally and confirmed that the bug exists
  and that the fix works. This fix has been picked up by linux-next and
  hopefully the automated testing bots and no problems have been
  reported from those sources.

  Ordinarily I would let something like this sit a little longer but I
  am going to be away at Linux Plumbers the rest of this week and I am
  afraid if I don't send the pull request now this fix will get lost"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  mnt: fix __detach_mounts infinite loop
2018-11-14 13:44:52 -06:00
Linus Torvalds
857c34cd09 Merge branch 'parisc-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fix from Helge Deller:
 "Revert one patch which changed how spinlocks get released. It breaks
  the rwlock implementation in glibc"

* 'parisc-4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Revert "Release spinlocks using ordered store"
2018-11-14 13:42:41 -06:00
Petr Vorel
43aa09fee2 apparmor: Fix warning about unused function apparmor_ipv6_postroute
when compiled without CONFIG_IPV6:
security/apparmor/lsm.c:1601:21: warning: ‘apparmor_ipv6_postroute’ defined but not used [-Wunused-function]
 static unsigned int apparmor_ipv6_postroute(void *priv,
                     ^~~~~~~~~~~~~~~~~~~~~~~

Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: John Johansen <john.johansen@canonical.com>
2018-11-14 11:42:18 -08:00
Linus Torvalds
e2f8b472a7 Merge branch 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm
Pull ARM fix from Russell King:
 "It was noticed that one of Julien's patches contained an error, this
  fixes that up"

* 'spectre' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8810/1: vfp: Fix wrong assignement to ufp_exc
2018-11-14 13:40:22 -06:00
Johan Hovold
1decef3704 gnss: sirf: fix synchronous write timeout
Passing a timeout of zero to the synchronous serdev_device_write()
helper does currently not imply to wait forever (unlike passing zero to
serdev_device_wait_until_sent()). Instead, if there's insufficient
room in the write buffer, we'd end up with an incomplete write.

Fixes: d2efbbd18b ("gnss: add driver for sirfstar-based receivers")
Cc: stable <stable@vger.kernel.org>     # 4.19
Signed-off-by: Johan Hovold <johan@kernel.org>
2018-11-14 20:37:41 +01:00
Johan Hovold
56a6c72683 gnss: serial: fix synchronous write timeout
Passing a timeout of zero to the synchronous serdev_device_write()
helper does currently not imply to wait forever (unlike passing zero to
serdev_device_wait_until_sent()). Instead, if there's insufficient
room in the write buffer, we'd end up with an incomplete write.

Fixes: 37768b054f ("gnss: add generic serial driver")
Cc: stable <stable@vger.kernel.org>     # 4.19
Signed-off-by: Johan Hovold <johan@kernel.org>
2018-11-14 20:37:28 +01:00
Alan Brady
d5585b7b68 i40e: prevent overlapping tx_timeout recover
If a TX hang occurs, we attempt to recover by incrementally resetting.
If we're starved for CPU time, it's possible the reset doesn't actually
complete (or even fire) before another tx_timeout fires causing us to
fly through the different resets without actually doing them.

This adds a bit to set and check if a timeout recovery is already
pending and, if so, bail out of tx_timeout.  The bit will get cleared at
the end of i40e_rebuild when reset is complete.

Signed-off-by: Alan Brady <alan.brady@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14 10:56:34 -08:00
Mitch Williams
7cd8eb0861 i40e: suppress bogus error message
The i40e driver complains about unprivileged VFs trying to configure
promiscuous mode each time a VF reset occurs. This isn't the fault of
the poor VF driver - the PF driver itself is making the request.

To fix this, skip the privilege check if the request is to disable all
promiscuous activity. This gets rid of the bogus message, but doesn't
affect privilege checks, since we really only care if the unprivileged
VF is trying to enable promiscuous mode.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14 10:56:34 -08:00
Richard Rodriguez
211257a499 i40e: Use correct shift for VLAN priority
When using port VLAN, for VFs, and setting priority bits, the device
was sending out incorrect priority bits, and also setting the CFI
bit incorrectly.

To fix this, changed shift and mask bit definition for this function, to
use the correct ones.

Signed-off-by: Richard Rodriguez <richard.rodriguez@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14 10:56:33 -08:00
Alice Michael
843faff87a virtchnl: Fix off by one error
When calculating the valid length for a VIRTCHNL_OP_ENABLE_CHANNELS
message, we accidentally allowed messages with one extra
virtchnl_channel_info structure on the end. This happened due
to an off by one error, because we forgot that valid_len already
accounted for one virtchnl_channel_info structure, so we need to
subtract one from the num_tc value.

Signed-off-by: Alice Michael <alice.michael@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14 10:56:33 -08:00
Alice Michael
c9a983058a virtchnl: white space and reorder
White space change.

Move the check on the virtchnl_vsi_queue_config_info struct
to be close to the struct like all the other similar checks.
This keeps it clearer and easier to read.

Signed-off-by: Alice Michael <alice.michael@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14 10:56:33 -08:00
Jacob Keller
61bfb06005 i40e: always set ks->base.speed in i40e_get_settings_link_up
In i40e_get_settings_link_up, set ks->base.speed to SPEED_UNKNOWN
in the case where we don't know the link speed.

Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14 10:56:33 -08:00
Mitch Williams
7c3758f783 i40e: don't restart nway if autoneg not supported
On link types that do not support autoneg, we cannot attempt to restart
nway negotiation. This results in a dead link that requires a power
cycle to remedy.

Fix this by saving off the autoneg state and checking this value before
we try to restart nway.

Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14 10:56:33 -08:00
Patryk Małek
5734fe8748 i40e: Allow disabling FW LLDP on X722 devices
This patch allows disabling FW LLDP agent on X722 devices.
It also changes a source of information for this feature from
pf->hw_features to pf->hw.flags which are set in i40e_init_adminq.

Signed-off-by: Patryk Małek <patryk.malek@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14 10:56:33 -08:00
Alice Michael
c95cb7b25f i40e: update driver version
The version numbers have not been kept up to date and this is
an effort to ammend that.

Signed-off-by: Alice Michael <alice.michael@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14 10:56:33 -08:00
Jan Sokolowski
f5a7b21b24 i40e: Protect access to VF control methods
A scenario has been found in which simultaneous
addition/removal and modification of VF's might cause
unstable behaviour, up to and including kernel panics.

Protect the methods that create/modify/destroy VF's
by locking them behind an atomically set bit in PF status
bitfield.

Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14 10:56:33 -08:00
Patryk Małek
4ff2d85403 i40e: Replace strncpy with strlcpy to ensure null termination
Using strncpy allows destination buffer to be not null terminated
after the copying takes place. strlcpy ensures that's not the
case by explicitly setting last element in the buffer as '\0'.

Signed-off-by: Patryk Małek <patryk.malek@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14 10:56:33 -08:00
Krzysztof Galazka
de10933e37 i40e: Add capability flag for stopping FW LLDP
Add HW capability flag to indicate that firmware supports stopping
LLDP agent. This feature has been added in FW API 1.7 for XL710
devices and 1.6 for X722. Also raise expected minor version number
for X722 FW API to 6.

Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14 10:56:33 -08:00
Jan Sokolowski
8554768c2c i40e: Use a local variable for readability
Use a local variable to make the code a bit more readable.

Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14 10:56:33 -08:00
Lance Roy
6a9a5ec10e i40e: Replace spin_is_locked() with lockdep
lockdep_assert_held() is better suited to checking locking requirements,
since it won't get confused when someone else holds the lock. This is
also a step towards possibly removing spin_is_locked().

Signed-off-by: Lance Roy <ldr709@gmail.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14 10:56:33 -08:00
Matthias Kaehlcke
a789fd0bab arm64: dts: qcom: pm8998: Add die temperature channel node to the ADC
Add a channel node for the die temperature to the ADC.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 10:19:14 -08:00
Matthias Kaehlcke
b59b94f76e dt-bindings: iio: vadc: Add unit address to ADC channel node in example
The node has a reg property, therefore its name should include a unit
address. Also change the name from 'usb_id_nopull' to 'adc-chan', which
is the preferred name for ADC channel nodes.

Include headers for constants used in the example.

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 10:19:10 -08:00
Stephen Boyd
ed3cafa79e soc: qcom: cmd-db: Stop memcpy()ing in cmd_db_read_aux_data()
Let's change the function signature to return the pointer to memory or
an error pointer on failure, and take an argument that lets us return
the size of the aux data read. This way we can remove the
cmd_db_read_aux_data_len() API entirely and also get rid of the memcpy
operation from cmd_db to the caller. Updating the only user of this code
shows that making this change allows us to remove a function and put the
lookup where the user is.

Cc: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Evan Green <evgreen@chromium.org>
Cc: Jordan Crouse <jcrouse@codeaurora.org>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 10:06:24 -08:00
Stephen Boyd
84fa36eb30 soc: qcom: cmd-db: Remove memcpy()ing from cmd_db_get_header()
The cmd_db_get_header() function is a static local function that doesn't
need to copy anything from one place to another. Instead, it can just
point into the region by returning pointers to what we're looking for.
If we do that, we should mark what we're returning as const so that code
can't modify cmd-db without an obvious cast.

Cc: Mahesh Sivasubramanian <msivasub@codeaurora.org>
Cc: Lina Iyer <ilina@codeaurora.org>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Evan Green <evgreen@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 10:05:50 -08:00
Niklas Cassel
808e10330b soc: qcom: Drop help text for QCOM_QMI_HELPERS
The help text is visible in menuconfig, however QCOM_QMI_HELPERS is a
hidden kconfig, so it is not selectable in menuconfig.

Remove the help text so that it is more clear that this is intentionally
a hidden kconfig.

Signed-off-by: Niklas Cassel <niklas.cassel@linaro.org>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 10:03:36 -08:00
Arun Kumar Neelakantam
c4fe17e0e3 soc: qcom: qmi_interface: Limit txn ids to U16_MAX
Txn IDs created up to INT_MAX cause overflow while storing
the IDs in u16 type supported by QMI header.

Limit the txn IDs max value to U16_MAX to avoid overflow.

Signed-off-by: Arun Kumar Neelakantam <aneela@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 10:02:07 -08:00
Jordan Crouse
e0f2cfeb59 soc: qcom: llcc-slice: Add error checks for API functions
llcc_slice_getd can return a ERR_PTR code on failure. Add a IS_ERR_OR_NULL
check to subsequent API calls that use struct llcc_slice_desc to guard
against faults and to let the leaf drivers get away with safely using a
ERR_PTR() encoded "pointer" in the aftermath of a llcc_slice_getd error.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: Vivek Gautam <vivek.gautam@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 09:59:03 -08:00
Arnd Bergmann
8c1919a2b4 soc: qcom/llcc: add MODULE_LICENSE tag
The lack of a MODULE_LICENSE tag prevents building the llcc driver
as a loadable module:

FATAL: modpost: GPL-incompatible module llcc-slice.ko uses GPL-only symbol 'ktime_get'

This adds the appropriate license and description tags.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 09:56:36 -08:00
Alok Chauhan
279536a564 soc: qcom: Add irq clear handling during SE init
when the kernel inits a SE, its quite possible we have pending interrupts
from bootloaders which did not handle/clear them. So do this in kernel at
the SE init, to avoid some of it causing bad behavior, while at it also
club all the register writes needed to clear the se irqs into a function
to avoid repeating it over.

Signed-off-by: Alok Chauhan <alokc@codeaurora.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 09:51:50 -08:00
Amit Kucheria
4884788b7b arm64: dts: sdm845: enable tsens thermal zones
One thermal zone per cpu is defined

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 09:32:39 -08:00
Amit Kucheria
9ee80560a3 arm64: dts: msm8916: Add camera thermal zone
Initialise the camera thermal zone to export temperature to userspace.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 09:32:34 -08:00
Amit Kucheria
154233c898 arm64: dts: msm8916: Add gpu thermal zone
Initialise the gpu thermal zone to export temperature to userspace.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 09:32:30 -08:00
Amit Kucheria
2b4e5fc0ed arm64: dts: msm8916: thermal: Add "qcom,sensors" property
This new property allows the number of sensors to be configured from DT
instead of being hardcoded in platform data. Use it.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 09:32:26 -08:00
Amit Kucheria
95b0ddfd21 arm64: dts: msm8916: thermal: split address space into two
We've earlier added support to split the register address space into TM
and SROT regions. Split up the regmap address space into two for msm8916
that has a similar register layout.

Since tsens-common.c/init_common() currently only registers one address
space, the order is important (TM before SROT).  This is OK since the
code doesn't really use the SROT functionality yet.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Acked-by: Andy Gross <andy.gross@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
2018-11-14 09:32:20 -08:00
Andy Gross
73e43d5cdf Qualcomm ARM64 DT Fixes for 4.20-rc1
* Fix reserved gpio ranges for SDM845 and MSM8998
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJb5hxdAAoJEFKiBbHx2RXV6X4P/iCUzhIINmHnQgUaTnrGdjbZ
 1v2T39YJ4DQFKnns14l/EOjsVr+0vmTuHRl3/09qVGAwFj2780RVZhoOPa0o5AVY
 Dkn4UhsZ+JjlzltH/dHNyMR7qjWhCBGDPPqTSPnJdqMJ6Lugr8mYbZRqvV68+TqV
 bYZyGuRfvSc+9rSC21qeiBOQVbL/02MMaK1wu00TlGUuJfNrD/tlUs90sQPlntYu
 8mzbieETPZT3g+4GPN/9icms6pfo9f0mqY3pU2KOge6dfhwgwwQ+Jz8u3qzwWHNf
 kMaU12GufZWnxXd1ty9oQxTl/MJMUx6dES7Z+y4RAIcPhgS8HF0MubUlGtih7E3l
 xiMUzX1Vorj3gP12EUWsAQy0H+LxlnPV0K3QkpjjVfAZZ4ClbLbrx/erU+AKe6NZ
 QA12Zosky2zP3njxhrlV+eWqzFRFWVm7io/7qsh4lNUgwmZV1xeMm4y3wruvsQNN
 UvAdzYDAuRi8hG1f7ga5vVN1WEKvbyVRQ+wqfW8icbmiRacihmbMEbqgf74bYOYu
 24WZ2eD81lDghJ6lZb7p4AtSR0Ue3NaaPs51BiJTGyL4zfvdhHrC/cXtcBRRuXIC
 mhjeWtePNT3LJruy61LPV78njSLvurfPCtgtT9ifdUgmcBWjymBWYerj3wuZjA/F
 wxrzauptlGDyahVGpxgB
 =8DIK
 -----END PGP SIGNATURE-----

Merge tag 'qcom-fixes-for-4.20-rc1' into arm64-for-4.21

Qualcomm ARM64 DT Fixes for 4.20-rc1

* Fix reserved gpio ranges for SDM845 and MSM8998
2018-11-14 09:31:54 -08:00